Answer:
Clay soil
Explanation:
We were told in the question about two samples of soil A and B. Sample B was confirmed to be loamy soil but it was discovered that sample A absorbed more water than sample B.
We now have to think about the kind of soil that has the greatest ability to absorb water. That soil type is called clay soil.
Clay soils possess a large surface area which is responsible for its ability to absorb more water. Hence, clay soil has the greatest water holding capacity.
Ammonium sulfate (NH4)2SO4 is made by reacting 25.0 L of 3.0 mol/L H2SO4 with 3.1× 103 L of NH3 at a pressure of 0.68 atm and a temperature of 298 K according to the following reaction .
NH3(g) + H2SO4(aq) → (NH4)2SO4 (aq)
How many grams of ammonium sulfate are produced?
Answer: The mass of [tex](NH_4)_2SO_4[/tex] produced is 9910.5 g
Explanation:
For [tex]H_2SO_4[/tex]:Molarity is calculated by using the equation:
[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex] ......(1)
Molarity of [tex]H_2SO_4[/tex] = 3.0 M
Volume of solution = 25.0 L
Putting values in equation 1, we get:
[tex]\text{Moles of }H_2SO_4=(3.0mol/L\times 25.0L)=75mol[/tex]
For [tex]NH_3[/tex]:The ideal gas equation is given as:
[tex]PV=nRT[/tex] .......(2)
where,
P = pressure of the gas = 0.68 atm
V = volume of gas = [tex]3.1\times 10^3L[/tex]
n = number of moles of gas = ? moles
R = Gas constant = 0.0821 L.atm/mol.K
T = temperature of the gas = 298 K
Putting values in equation 2, we get:
[tex]0.68atm\times 3.1\times 10^3L=n\times 0.0821L.atm/mol.K\times 298K\\\\n=\frac{0.68\times 3.1\times 10^3}{0.0821\times 298}=86.16mol[/tex]
For the given chemical equation:
[tex]NH_3(g)+H_2SO_4(aq)\rightarrow (NH_4)_2SO_4(aq)[/tex]
By stoichiometry of the reaction:
If 1 mole of [tex]H_2SO_4[/tex] reacts with 1 mole of [tex]NH_3[/tex]
So, 75 moles of [tex]H_2SO_4[/tex] will react with = [tex]\frac{1}{1}\times 75=75mol[/tex] of [tex]NH_3[/tex]
As the given amount of [tex]NH_3[/tex] is more than the required amount. Thus, it is present in excess and is considered as an excess reagent
Thus, [tex]H_2SO_4[/tex] is considered a limiting reagent because it limits the formation of the product.
By the stoichiometry of the reaction:
If 1 mole of [tex]H_2SO_4[/tex] produces 1 mole of [tex](NH_4)_2SO_4[/tex]
So, 75 moles of [tex]H_2SO_4[/tex] will produce = [tex]\frac{1}{1}\times 75=75mol[/tex] of [tex](NH_4)_2SO_4[/tex]
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
We know, molar mass of [tex](NH_4)_2SO_4[/tex] = 132.14 g/mol
Putting values in above equation, we get:
[tex]\text{Mass of }(NH_4)_2SO_4=(75mol\times 132.14g/mol)=9910.5g[/tex]
Hence, the mass of [tex](NH_4)_2SO_4[/tex] produced is 9910.5 g
Orthogonal vectors we use theorem for
Pythagoras
true
false
Select the statement(s) that describe the characteristics of transition metals. a. Transition metals have partially filled d subshells. b. Transition metals give rise to cations that have completely filled d subshells. c. Group 2B elements are not transition metals because they neither have nor readily acquire partially filled d orbitals.
Answer: The correct option is A,
--> a.) Transition metals have partially filled d subshells.
Explanation:
Transition elements are all metals of economic importance. They are found in the d- lock of the periodic table between group 2 and 3. They occupy three rows, with ten elements in each row. The term 'transition metals' refers only to an element which has PARTIALLY filled d orbitals. Typical example of transition metals include iron (Fe).
They have partially filled 3d orbitals which are responsible for the special properties of the metals. These include:
--> Physical properties: the transition metals have high boiling and melting points. They are hard, dense and lustrous. They are also good conductors of heat and electricity.
--> Chemical reactivity: In the s- block and p-block, the chemical properties of the elements in the same period vary, often quite markedly, from left to right. This does not happen with the transition metals because electrons are added progressively to the inner d-orbitals.
--> Variable oxidation states: they have variable oxidation states because 3d electrons are available for bond formation.
The half life for the radioactive decay of potassium-40 to argon-40 is 1.26×109 years. Suppose nuclear chemical analysis shows that there is 0.359 mmol of argon-40 for every 1.000mmol of potassium-40 in a sample of rock. Calculate the age of the rock.
Answer:
2.42x10⁹ years is the age of the rock
Explanation:
The decay of an isotope follows the equation:
Ln[A] = -kt + Ln[A]₀
Where [A] is amount of isotope after time t, k is decay constant and [A]₀ is the initial amount of the isotope
To find decay constant from half-life:
k = ln2 / half-life
k = ln2 / 1.26x10⁹years
k = 5.501x10⁻¹⁰ years⁻¹
As in the reaction, K-40 produce Ar-40:
[A] = 0.359mmol
[A]₀ = 0.359mmol + 1.000mmol = 1.359mmol
Replacing:
Ln[0.359mmol] = -5.501x10⁻¹⁰ years⁻¹t + Ln[1.359mmol]
-1.3312 = -5.501x10⁻¹⁰ years⁻¹t
t = 2.42x10⁹ years is the age of the rock
Water is considered to be a diatomic molecule because it composed of two different atoms. True or false?
Answer:
false
Explanation:
False, water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Explanation:
The monoatomic molecule is composed of a single atom of an element.For example: Helium(He) , argon(Ar) etc.The diatomic molecule is composed of two atoms of the same or different elements.For example: hydrochloric acid (HCl), sodium chloride (NaCl) etc.The polyatomic molecule is composed of three or more than three atoms of the same or different elements.For example: water ([tex]H_2O[/tex]), sodium hydroxide(NaOH) etc.So, from this, we can conclude that water is a polyatomic molecule made up of two atoms of oxygen and 1 atom of hydrogen.
Learn more about types of molecules here:
brainly.com/question/3213630?referrer=searchResults
brainly.com/question/4979095?referrer=searchResults
Which is the balanced version of the half-reaction below?
H2S → S+H+
Answer:
C. [tex]H_2S\rightarrow S+2H^++2e^-[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction, it turns out possible to realize there is one sulfur atom on each side of the chemical equation but two hydrogen atoms on the left and one on the right, which means the latter must be balanced in agreement to the law of conservation of mass.
In such a way, by setting a 2 on H⁺, the reaction will be balanced:
[tex]H_2S\rightarrow S+2H^+[/tex]
Now, we count the transfer electrons for sulfur from -2 to 0 as 2e⁻ on the right, which will match with the option C.
[tex]H_2S\rightarrow S+2H^++2e^-[/tex]
Regards!
55:28
An object is moving across a surface, but it does not gain or lose speed. Which best describes the object's force?
The net force is positive.
The net force is zero.
The positive force is greater than the negative force.
The negative force is greater than the positive force.
ke this and totum
Save and Exit
Next
S
Answer:
The correct answer is - The net force is zero.
Explanation:
When an object moves on the surface with the same or constant acceleration which means there is no gain or loss of the speed it shows that all the forces of the object are at a point of zero.
If there would be any force applied on the object there must be some change in the velocity or acceleration but in this case there is no loss or gain of speed which means there is the object's net force is zero.
Therefore, option B is correct.
A recipe calls for 1/4 cup of butter. One ounce (oz) of butter is equivalent to 2 tablespoons (T), and there are 8 oz of butter in 1 cup. Which of the following statements correctly interpret the information provided?
a. The information provided gives the conversion factor 8oz/2T.
b. The information provided gives the conversion factor 8oz/1 cup.
c. The recipe requires 64 T of butter.
d. The recipe requires 4T of butter.
Answer:
D
Explanation:
8oz=1cup
Xoz=1/4cup
cross multiply
Xoz=8×1/4=2
2oz=1/4cup
1oz=2T
2oz=x
cross multiply
×=2×2=4T
The cup of butter, number of tablespoons and ounces of butter are all in direct proportion with one another. The interpretation of the information provided is:
(b). The information provided gives the conversion factor 8oz/1 cup.
Given that:
[tex]1\ recipe = \frac{1}{4}\ cup[/tex]
[tex]1\ oz = 2T[/tex]
[tex]8\ oz = 1\ cup[/tex]
Multiply both sides of [tex]1\ oz = 2T[/tex] by 8
[tex]8 \times 1oz = 8 \times 2T[/tex]
[tex]8 oz = 16T[/tex]
Substitute 8oz for 1 cup in: [tex]1\ recipe = \frac{1}{4}\ cup[/tex]
[tex]1\ recipe = \frac{1}{4} \times 8oz[/tex]
Substitute [tex]8 oz = 16T[/tex]
[tex]1\ recipe = \frac{1}{4} \times 16T[/tex]
[tex]1\ recipe = 4T[/tex]
The interpretations are as follows:
[tex]1\ recipe = 4T[/tex] means that 1 recipe requires 4T of butter [tex]8\ oz = 1\ cup[/tex] means that the information provided gives a conversion of 8oz/1 cupHence, (b) is correct
Read more about direct proportions at:
https://brainly.com/question/1266676
Which of the following expressions is the correct equilibrium constant expression for the equilibrium between dinitrogen tetroxide and nitrogen dioxide? N subscript 2 O subscript 4 space left parenthesis g right parenthesis space rightwards arrow over leftwards arrow 2 space NO subscript 2 space left parenthesis straight g right parenthesis
Answer:
Correct answer:
The equilibrium expression is defined as the ratio of the concentration of products divided by the concentration of the reactants. Each reactant or product is raised to the power corresponding to its coefficient in the balanced chemical equation.
Explanation:
Consider the following events that take place when rip currents occur.
A. Waves travel to the beach.
B. Waves are trapped by the sandbars.
C. Waves reach the shore and go back to the ocean.
D. Waves speed up and flow between the sandbars.
E. Waves are broken by the sandbars.
Which list shows the order of events in the production of rip currents?
2. On the periodic table, what is the difference between a group (or family) and a period?
Answer:
On the periodic table,periods are horizontal rows (across) the periodic table while groups are vertical columns (down) the table.We have groups in the periodic table like transition metals,rare earth,alkali metals ,alkaline earth metals halogens and noble gases
Answer:
Horizontal row call period and vertical column called group!
Physical,chemical, reaction procedure, shape,size, enthalpy of dissociation, bonding,non bonding, various things that segregated group and period....
Based on your knowledge of factors affecting the rate of reaction, why is there a danger of explosions in places such as flour mills and coal mines where there are large quantities of powdered, combustible materials?
Answer:
See Explanation
Explanation:
Rate of reaction refers to how quickly or slowly a reaction proceeds. The rate of reaction depends on certain factors.
Two among the factors that affect the rate of reaction are the concentration of reactants and the surface area of reactants.
The more the concentration of reactants, the faster the rate of reactants because there is a high possibility of collision between reactants. Also, the higher the surface area of reactants, the greater the rate of reaction.
In flour mills and coal mines where there is a large amount (concentration) of combustible materials and the particles are powdered (high surface area), there is a greater risk of explosion due to a high rate of reaction owing to a combination of the two factors discussed above.
The compound magnesium nitrate has the formula Mg(NO3)2.
What is the relative formula mass of magnesium nitrate?
Explanation:
Answer
Open in answr app
Correct option is
C
148
1 atom of Mg=1x24=24
2 atom of N=2x14=28
6 atom of O=6x16=96
Total mass=148
Between energy and life which one comes first answer with scientific reason
Explanation:
While the sun is an excellent source of energy, not all forms of life can utilize the sun's energy directly. This lesson describes how plants transform the sun's energy into potential energy stored in sugar, how living organisms utilize energy in sugar to perform work, and how the relationship between photosynthesis and cellular respiration is necessary for life.
Create an account
In the silver recovery lab you will be doing chemical reactions and forming solid ionic compounds from their soluble ions. this question will give you practice in writing ionic compunds. What is chemical formula of the nuetral compound formed from the ions below:
1. Cr3+ ions and Cl- ions
2. Mn4+ ions and O2^- ions
3. Mg2+ ions and CO3^2- ions
Answer:
1. CrCl₃ 2. MnO₂ 3. MgCO₃
Explanation:
For a compound to be neutral, we need the same number of positive charges and negative charges.
1. Cr³⁺ ions and Cl⁻ ions. We will need 1 Cr³⁺ cation and 3 Cl⁻ anions. The chemical formula is CrCl₃.
2. Mn⁴⁺ ions and O²⁻ ions. We will need 1 Mn⁴⁺ cation and 2 O²⁻ anions. The chemical formula is MnO₂.
3. Mg²⁺ ions and CO₃²⁻ ions. We will need 1 Mg²⁺ cation and 1 CO₃²⁻ anion The chemical formula is MgCO₃.
0-17, an isotope of oxygen, has 9 neutrons. The
of oxygen is 8.
isotope number
atomic number
mass number
atomic mass
Answer:
atomic number
Explanation:
The mass number (A) of an element is obtained by summing the number of neutrons and protons (nucleons) in the atom of that element. However, the proton number of an element is its atomic number (Z). Hence, it can be said that:
mass number = no. of neutrons + atomic number/number of protons.
According to this question, an isotope of oxygen is said to have a mass number of 17. If the neutron number of this isotope is given as 9, then this means that its ATOMIC NUMBER or no. of protons of that isotope is (17 - 9) = 8.
Answer:
atomic number
Explanation:
The oxidation number of nitrogen in NO2 is:
a. 1.
b. 2.
c. 3.
d. 4.
e. 5.
f. None of the above.
Answer:
Option D. 4
Explanation:
The oxidation number of nitrogen (N) in NO₂ can be obtained as follow:
Oxidation number of O = –2
Oxidation number of N =?
N + 2O = 0
N + 2(–2) = 0
N – 4 = 0
Collect like terms
N = 0 + 4
N = +4
Thus, the oxidation number of nitrogen (N) in NO₂ is +4
When taking a measurement with a pH meter, keep the instrument in the ______________ until it is needed. Rinse the pH meter with ______________ and gently pat dry. Place the meter in the sample solution, and record the measurement when the pH __________
Answer:
Storage solution; deionized water; stabilizes.
Explanation:
The pH scale measures the concentration of hydrogen ions in acidic and alkaline solutions.
In chemistry, it literally means power of hydrogen ions and it is a measure of the molar concentration of hydrogen ions in a particular solution, thus specifying the acidity, neutrality or basicity of chemical solutions.
Mathematically, the pH of a solution is given by;
[tex] pH = -log_{10}(H^{+}) [/tex]
Hence, a solution with a pH of 7 is neutral. Also, a solution with a pH below 7 is acidic but basic (alkaline) if it's pH is above 7.
A pH meter can be defined as a scientific instrument or device designed and developed for the measurement of the hydrogen-ion concentration in water-based solutions, in order to determine their level of acidity or alkanility.
When using a pH meter to take a measurement, you should keep it in a storage solution until it is needed. Also, a deionized water should be used to rinse the pH meter and gently pat dry.
Furthermore, the pH meter should be placed in a given sample solution and a reading of the measurement taken when the pH of the solution stabilizes.
which of group of organism has the least biomass?which has the least energy
Answer:
The answer is consumers
Answer:
Consumers are the group of organisms that has the least biomass and energy.
What are the labeled structures
Answer:
a
Explanation:
What is represented by the chemical formula
PbCl2(s)?
A) a substance
B) a solution
C) a homogeneous mixture
D) a heterogeneous mixture
A hemil reation
Answer:
d
Explanation:
cuaase that it sirhal
The chemical formula PbCl₂(s) represented by:
A) a substance
The chemical formula PbCl₂(s) represents a substance. A substance is a single, pure chemical entity with a definite composition. It can be an element, a compound, or an alloy.
A solution is a homogeneous mixture of two or more substances. A homogeneous mixture is a mixture in which the components are evenly distributed throughout the mixture.
A heterogeneous mixture is a mixture in which the components are not evenly distributed throughout the mixture.
A reaction is a process in which one or more substances are transformed into one or more new substances.
Therefore, the chemical formula PbCl₂(s) represents a substance, and the answer is (A).
To know more about chemical formula here
https://brainly.com/question/32018188
#SPJ6
Some chemical bonds are considered molecules while others are considered compounds.
Explain what the difference is and provide one example for each.
Molecule is the general term used to describe any atoms that are connected by chemical bonds. Every combination of atoms is a molecule. A compound is a molecule made of atoms from different elements. All compounds are molecules, but not all molecules are compounds.
One example of a molecule is [tex]Cl_2[/tex] (chlorine).
Examples of a compound is NaCl (sodium chloride) or [tex]H_2O\\[/tex] (water)
Helppp!
Is astatine (At), atomic number 85, a metal or nonmetal? Why?
Answer:
At is a metalloid
Explanation: Meaning that it displays some of the characteristics of a metal but can also display characteristics of nonmetals. Silicon is one such element. Elemental Silicon has a dark lustrous metallic appearance but it is quite brittle. Some authorities include Astatine as a halogen as it has seven electrons in its valence shell placing it just below iodine in period 17 VIIA. Additionally, because Astatine is only ever found naturally as the result of radioactive decay from more dense elements it is the rarest naturally occurring element in Earth's crust.
I hope this helps at least a little.
Regards,
JR Holt
Chemist retired
Sodium azide, NaN3, the explosive compound found in automobile air bags, decomposes according to the following equation: 2NaN3(s)right arrow 2Na(s) + 3N2(g)
What mass of NaN3 is required to provide the nitrogen needed to inflate an 80.0-L bag to a pressure of 1.3 atm at 27 degree C? What is the density of the gas under these conditions?
Answer:
1.9 × 10² g NaN₃
1.5 g/L
Explanation:
Step 1: Write the balanced decomposition equation
2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)
Step 2: Calculate the moles of N₂ formed
N₂ occupies a 80.0 L bag at 1.3 atm and 27 °C (300 K). We will calculate the moles of N₂ using the ideal gas equation.
P × V = n × R × T
n = P × V / R × T
n = 1.3 atm × 80.0 L / (0.0821 atm.L/mol.K) × 300 K = 4.2 mol
We can also calculate the mass of nitrogen using the molar mass (M) 28.01 g/mol.
4.2 mol × 28.01 g/mol = 1.2 × 10² g
Step 3: Calculate the mass of NaN₃ needed to form 1.2 × 10² g of N₂
The mass ratio of NaN₃ to N₂ is 130.02:84.03.
1.2 × 10² g N₂ × 130.02 g NaN₃/84.03 g N₂ = 1.9 × 10² g NaN₃
Step 4: Calculate the density of N₂
We will use the following expression.
ρ = P × M / R × T
ρ = 1.3 atm × 28.01 g/mol / (0.0821 atm.L/mol.K) × 300 K = 1.5 g/L
Which of the following is not generally a characteristic of metal?
Ductility
O
Malleability
High melting point
Low boiling point
How many grams of solid sodium cyanide should be added to 1.00 L of a 0.119 M hydrocyanic acid solution to prepare a buffer with a pH of 8.809
Answer:
1.62 g
Explanation:
Given that:
Concentration of HCN = 0.119 M
Assuming the ka 4.00 × 10⁻¹⁰
The pKa of HCN (hydrocyanic acid) = -log (Ka)
= - log ( 4.00 × 10⁻¹⁰)
= 9.398
pH of buffer = 8.809
Using Henderson Hasselbach equation:
[tex]pH = pKa + log \dfrac{[conjugate\ base ]}{acid}[/tex]
[tex]pH = pKa + log \dfrac{[CN^-]}{[HCN]}[/tex]
[tex]8.809 = 9.398 +log \dfrac{[CN^-]}{[HCN]}[/tex]
[tex]log \dfrac{[CN^-]}{[HCN]}= 8.809 - 9.398[/tex]
[tex]log \dfrac{[CN^-]}{[HCN]}= -0.589[/tex]
[tex]\dfrac{[CN^-]}{[HCN]}= 0.2576[/tex]
[CN^-] = 0.2576[HCN]
[CN^-] = 0.2756 (0.119) L
[CN^-] = 0.033 M
∴
The amount of NaCN (sodium cyanide) is calculated as follows:
[tex]= 1.00 L \times \dfrac{0.033 \ mol \ NacN }{1 \ L } \times \dfrac{49.01 \ g}{1 \ mol \ of \ NacN}[/tex]
= 1.62 g
Anew fictitious element was discovered. It is a metal named jolmium, J,and it has three valence electrons. If it combineswith iodine it forms jolmium iodide. Answer the following questions.a.Is this compound ionic or covalent
a. Is this compound ionic or covalent?
b. What is the formula of Jolmium iodide?
c. What is the charge on the metal J in this compound?
d. Explain how you know that is the charge?
Answer:
A new fictitious element was discovered.
It is a metal named jolmium, J, and it has three valence electrons.
If it combines with iodine it forms jolmium iodide. Answer the following questions.
a.Is this compound ionic or covalent
b. What is the formula of Jolmium iodide?
c. What is the charge on the metal J in this compound?
d. Explain how you know that is the charge?
Explanation:
It is given the element jolmium J is a metal with three valence electrons.
Since metals are highly electropositive, they lose electrons easily and form cations (Ions with a positive charge).
[tex]J^{3+}[/tex] ion will be formed.
b) The formula of jolmium iodide is shown below:
[tex]J^{+3} I^{-1}\\The formula becomes:\\JI_{3}[/tex]
a) The compound is ionic in nature.
Since the compound formed between a metal atom and a nonmetal atom will take place by transfer of electrons.
Hence, it is ionic in nature.
c) The charge on the metal J in this compound is +3.
d) Given J has three valence electrons.
That means it can lose three electrons to form a bond.
So, its valency is three.
Convert 400.0 ng/dL to cg/L
Answer:
.04 cg/L
Explanation:
After mixing the solutions in a separatory funnel, the stopper should be ______ and the liquid should be _______ and the layers allowed to separate. When you get close to the interface between the layers, ______ the funnel and turn over _______ heat up until the first layer is collected get eye level with to collect the second layer. _______
Answer:
Hence,
1) removed
2) drained through the stopcock
3) get eye level with
4) slow the draining
5) switch to a new flask
Explanation:
After mixing the solutions in a separatory funnel, the stopper should be removed and the liquid should be drained through the stopcock, and the layers allowed to separate. When you get close to the interface between the layers, get eye level with the funnel and turn over to slow the draining heat up until the first layer is collected. Switch to a new flask get eye level with it to collect the second layer.
The weak ionization constant (Ka)
for HCN is equal to:
Answer:
Ka = [H⁺] × [CN⁻] / [HCN]
Explanation:
Cyanhydric acid is a weak acid, according to the following equation:
HCN(aq) ⇄ H⁺(aq) + CN⁻(aq)
The acid ionization constant (Ka) is equal to the product of the concentrations of the ions raised to the stoichiometric coefficients divided by the concentration of the undissociated acid raised to its stoichiometric coefficient.
Ka for HCN is:
Ka = [H⁺] × [CN⁻] / [HCN]