Answer:
degree to which a substance dissolves in a solvent to make a solution
is this ok
Answer:
Have Fun
Explanation:
What is potential energy?
Answer:
Potential energyPotential energy is the energy possessed by an object because of its position with respect to a reference.
Explanation:
The energy obtained because of its location or position is called potential energy.
》Example:
Water in a dam stores potential energy because of its height.
~ Happy Learning
°• Answer By Yoland •°
Plz solve anyone...........................
Answer:
no (units don't cancel each other out)
yes (convert both to same unit and multiply)
yes (multiply)
Explanation:
help me match the cards because there is a lot ill add more points please and thank you
Answer:
thats alot and makes no since
balancing chemical equations
i need help with number 1 :/ please help me, thank you
Answer:
Amplitude is measured from the center line to the highest point in the waves.
Wavelength is the distance between one wave to the other from the highest point.
Frequency is the rate of the waves.
-
use the following equation for the combustion of methane gas.
ch4(8) + 202(g) → co2(g) + 2h2o(1)
in a certain reaction at stp, 29.2 l of methane is combusted
with 63.3 l of oxygen.
what volume of excess reactant remains after the reaction is
complete?
lo2
Considering the definition of STP conditions and reaction stoichiometry, the volume of excess reactant that remains after the reaction is complete is 4.928 L.
Definition of STP conditionThe STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 mole O₂: 2 moles CO₂: 1 mole H₂O: 2 molesVolume of excess reactantYou know that in a certain reaction at STP, 29.2 L of methane CH₄ is combusted with 63.3 L of oxygen O₂.
Considering the definition of STP, you can apply the following rules of three:
if by definition of STP conditions 22.4 liters are occupied by 1 mole of methane, 29.2 L are occupied by how many moles of methane?[tex]amount of moles of methane=\frac{29.2 Lx1 mole}{22.4 L}[/tex]
amount of moles of methane= 1.30 moles
if by definition of STP conditions 22.4 liters are occupied by 1 mole of oxygen, 63.3 L are occupied by how many moles of oxygen?[tex]amount of moles of oxygen=\frac{63.3 Lx1 mole}{22.4 L}[/tex]
amount of moles of oxygen= 2.82 moles
Now you can apply the following rule of three to determine the excess reagent: if by stoichiometry 2 moles of O₂ reacts with 1 mole of CH₄, if 2.82 moles of O₂ react, how much moles of CH₄ will be needed?
[tex]moles of CH_{4} =\frac{2.82 moles of O_{2}x 1 moles of CH_{4}}{2 moles of O_{2}}[/tex]
moles of CH₄= 1.41 moles
But 1.41 moles of CH₄ are not available, 1.30 moles are available. Since you have less moles than you need to react with 2.82 moles of O₂, methane CH₄ will be the limiting reagent. And oxygen O₂ is excess reagent.
Now you can apply the following rule of three to the amount of O₂ that reacts when the limiting reactant reacts completely: if by stoichiometry 1 mole of CH₄ reacts with 2 moles of O₂, if 1.30 mole of CH₄ react, how much moles of O₂ will be needed?
[tex]moles of O_{2} =\frac{2 moles of O_{2}x 1.30 moles of CH_{4}}{1 moles of CH_{4}}[/tex]
moles of CH₄= 2.60 moles
So, after the reaction is complete, the moles of excess reactant that remains are calculated as:
2.82 moles - 2.60 moles= 0.22 moles
Finally, considering the definition of STP, you can apply the following rule of three: if by definition of STP conditions 1 mole of O₂ occupies a volume of 22.4 liters, 0.22 moles occupies how much volume?
[tex]volume=\frac{0.22 molesx22.4 L}{1 mole}[/tex]
volume= 4.928 L
In summary, the volume of excess reactant that remains after the reaction is complete is 4.928 L.
Learn more about
STP conditions:
https://brainly.com/question/26364483
brainly.com/question/8846039
brainly.com/question/1186356
how many significant figures does 0.00003 have?
Can somebody list only 2 ways whales are different from fish?
(Make it only like 1 sentence)
(WILL MARK BRAINLIEST)
:D
Answer:
1. whales are mammals and fish are not
2. Fish have gills which extract oxygen from the water and thus allow it to live underwater its entire life. Whales on the other hand do not have gills but instead have one or two blowholes
3. whales provide milk to their young and fish do not!
Explanation:
2. What element is steel mainly
composed of?
A Iron
B. Carbon
C. Manganese
D. Silver
Answer:
Carbon
Explanation:
Steel is an alloy of iron and carbon. Stainless steels are steels containing at least 10.5% chromium, less than 1.2% carbon and other alloying elements
Answer: B
Explanation:Steel is an alloy of iron and carbon.
What is one key physical difference between transition
metals and poor metals?
А.Atomic mass
B.Hardness
C.Reactivity
D.Charge
A ball moving at a 7.0 m/s has a momentum of 98 kg•m/s. What is the ball's mass?
Answer:
Explanation:
Momentum has the formula of kg m/s and is represented by m*v
Formula
momentum= mv
Givens
m =??
v = 7 m/s
mv = 98 kg m/s
Solution
98 = 7 * m
98/7 = m
m = 14 kg
the neutralization reaction gets its name from.the fact that the products of the reaction are
Answer:
Neutral
Explanation:
Neutralization reaction gets its name from the fact that the products of the reaction are _____.
neutral
How does temperature, pressure, and density impact the core of the Earth?
Answer:
temperatures within the outer core range from 7,200 to 9,000 F. Pressure also increases in the outer core due in part to the weight of the crust and mantle above.The Earth's magnetic field is generated by the outer core.
Explanation:
What is the cause of rejection of classical concept of oxidation and reduction reaction?
Answer:
Oxidation is the loss of electrons or an increase in the oxidation state of an atom, an ion, or of certain atoms in a molecule. Reduction is the gain of electrons or a decrease in the oxidation state of an atom, an ion, or of certain atoms in a molecule.
Explanation:
To solve such this we must know the concept of redox reaction. Therefore, The cause of rejection of classical concept of oxidation and reduction reaction is in any process, oxidation can occur only if reduction is also taking place side by side and vice versa.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
Oxidation and reduction reaction involves gain of electron and loss of electron simultaneously. This type of reaction is called redox reaction. The cause of rejection of classical concept of oxidation and reduction reaction is in any process, oxidation can occur only if reduction is also taking place side by side and vice versa.
Therefore, the cause of rejection of classical concept of oxidation and reduction reaction is in any process, oxidation can occur only if reduction is also taking place side by side and vice versa.
Learn more about the chemical reactions, here:
brainly.com/question/3461108
#SPJ2
What will a cathode ray do if a positive electrode is placed near the beam?
Answer:
The function of the cathode ray tube is to convert an electrical signal into a visual display. Cathode rays or streams of electron particles are quite easy to produce, electrons orbit every atom and move from atom to atom as an electric current.
please help !!!!!!!!!!!!!!!!
Answer:
covalen and ionic compound
PLEASE HELP ME!!
Write formulas for the following compounds:
a. lithium fluoride, lithium chloride, lithium bromide, lithium iodide, lithium oxide, lithium sulfide
b. sodium fluoride, sodium chloride, sodium bromide, sodium iodide, sodium oxide, sodium sulfide
c. potassium fluoride, potassium chloride, potassium bromide, potassium iodide, potassium oxide, potassium sulfide
d. ammonium fluoride, ammonium chloride, ammonium bromide, ammonium iodide, ammonium sulfide
Answer:
a).lithium fluoride => LiF
lithium chloride =>LiCl
lithium bromide => LiBr
lithium iodide => Lil
lithium oxide =>Li₂O
lithium sulfide => Li₂
b).sodium fluoride => NaF
sodium chloride => NaCl
sodium bromide => NaBr
sodium iodide => Nal
sodium oxide => Na₂O
sodium sulfide => Na₂S
c).potassium fluoride => KF
potassium chloride => KCl
potassium bromide => KBr
potassium iodide => KI
potassium oxide => K₂O
potassium sulfide => K₂S
d).ammonium fluoride =>NH₄F
ammonium chloride => NH₄Cl
ammonium bromide => NH₄Br
ammonium iodide => NH₄I
ammonium sulfide => (NH₄)₂S
Which sentence explains why gases can change volume but liquids cannot?
A. Gravity affects liquid atoms more than gas atoms.
B. The forces holding atoms together are stronger in a liquid than in
a gas.
O c. The forces holding a liquid together are more flexible than those in
a gas.
D. Liquid atoms are more like solid atoms than gas atoms.
Answer:
B. The forces holding atoms together are stronger in a liquid than in
a gas
I hope that this helps!
PLS HELP ASAP IM MARKING BRAINLIEST. This is science
Answer:
Random
Explanation:
Materials have numerous domains. Domains have a north and south side. In magnetic metals, all of the domains are pointed in the same direction. This creates an overall magnetic field that gives the material its magnetic property.
On the other hand, non-magnetic materials still have domains but they don't face the same direction. Instead, they are randomly directed. This means that the material cannot have the same magnetic properties that ferromagnetic materials have.
A pile of feathers has a mass of 57 g and a volume of 300 mL. Calculate the density.
Find the density of a brick that has a mass of 57 g and a volume of 12 mL.
A sample has a mass of 15 g and a volume of 3 mL. Calculate the density.
[tex]density = \frac{mass}{volume} [/tex]
1. density = 57/300
= 0.19 g/ml
2. density = 57/12
= 4.75 g/ml
3. density = 15/3
= 5.0 g/ml
What happens when a chemical hand warmer is unwrapped and starts to work?
A. A physical change absorbs thermal energy.
B. A chemical reaction absorbs thermal energy.
C. A physical change releases thermal energy.
D. A chemical reaction releases thermal energy.
Answer: D. A chemical reaction releases thermal energy.
Explanation:
Hope this helps! <3 :)
Consider the reaction below. upper c upper c l subscript 5 (g) double-headed arrow upper p upper c l subscript 3 (g) plus upper c l subscript 2 (g). at 500 k, the reaction is at equilibrium with the following concentrations. [pci5]= 0.0095 m [pci3] = 0.020 [ci2] = 0.020 m what is the equilibrium constant for the given reaction? 0.042 0.42 2.4 24
The equilibrium constant for the given reaction is 0.0421.
What is equilibrium constant?Equilibrium constant of any reaction is define as the ration of the product of concentration of products to the product of the concentration of reactants, with raise to the respective coefficients.
Given chemical reaction is:
PCl₅ → PCl₃ + Cl₂
The equilibrium constant's for this reaction is:
Kc = [PCl₃] [Cl₂] / [PCl₅], where
Concentration of [PCl₃] = 0.020M
Concentration of [Cl₂] = 0.020M
Concentration of [PCl₅] = 0.0095M
Putting all these values in the above equation we get,
Kc = (0.02 x 0.02) / 0.0095 = 0.0421
Hence, 0.0421 is the equilibrium constant.
To know more about equilibrium constant, visit the below link:
https://brainly.com/question/12858312
Answer:
A on edg
Explanation:
im doin it rn
Importance of iron metals ions in biological System
Answer:
Metal ions are fundamental elements for the maintenance of the lifespan of plants, animals and humans. Their substantial role in biological systems was recognized a long time ago. They are essential for the maintenance of life and their absence can cause growth disorders, severe malfunction, carcinogenesis or death
Explanation:
:)
Chemistry is the branch of science which make physis and biology clear true or false
Answer:
yes it is branch science make physics and biology in physics make therom and biology make defination
Please help brainiest is award.
Answer:
2 i think if not than its 4
Explanation:
Answer:
3 if its not than 4
Explanation:
Rank lead, phosphorus, and barium in order of increasing ionization energy.
Answer:
D) Ba < Pb < P
Explanation:
Barium (Ba): 5,2117
Lead (Pb): 7,4167
Phosphorus (P): 10,4867
Which substance is a heterogeneous mixture
Answer:
Is there any options?
Explanation:
Which of the following are NOT SAFE things to do, as we might get an electric shock?
1) Touching the switch of a geyser with dry hand.
2) Standing on a wooden stool to check a plug point.
3) Poking a metal rod into an electrical socket.
4) Touching the water in which an immersion heater is kept.
transition elements have variable valency why
Answer:
The transition elements have their valence electrons in two different sets of orbitals that are (n-1)d and ns. Thus, transition elements show variable valencies due to the involvement of penultimate d shell electrons.
Explanation:
Determine the mass of the negative electrode at the start of the experiment use figure 3