Limosine Company P charges a rental fee plus an
additional charge per hour. The equation y = 50 +
30x shows the total cost, y of renting the limosine,
and the x represents the hours. The cost to rent a
limosine from Company R is shown below in the
table. Which statement is true?
Time (hours)
Total Cost
O
A
B
C
Company R
1
2
3
4
$100 $125 $150 $175
5
$200
Company P has a lower rate of
change than Company R.
Company P charges $25 more
for its rental fee compared to
Company R.
Company R charges less money
for 1 hour of service compared
to Company P.

Historical sources generally should not be taken at face value. As you evaluate historical sources, you should always consider the biases, motivations, and potential weaknesses inherent in any given source. Although every source has inherent biases and a unique perspective, you should strive to locate and rely on sources that are as unbiased, or objective, as possible and sources that are rooted in verifiable information and corroborated by other sources.

This refers to things that tell us  more about history at the most basic level, and are used as clues in order to study history.

Historical sources can include coins, artefacts, monuments, literary sources, documents, artifacts, archaeological sites, features, oral transmissions, stone inscriptions, paintings, recorded sounds, images and oral history. Even ancient relics and ruins, broadly speaking, are historical sources. The types of sources include primary sources, secondary sources and tertiary sources.

Learn more about Historical sources on

https://brainly.com/question/28810231

#SPJ1

Historical sources should be approached with a critical mindset. Recognizing and analyzing biases, Motivations, and weaknesses inherent in sources is crucial for developing an accurate understanding of the past.

Historical sources generally should not be taken at face value. When evaluating historical sources, it is crucial to consider the biases, motivations, and potential weaknesses inherent in any given source. Every source, whether it is a primary document, a secondary analysis, or an oral account, carries inherent biases shaped by the author's perspective, social context, and personal interests. Recognizing and critically analyzing these biases is essential for developing a well-rounded understanding of historical events and processes.

While it may be challenging to find completely objective sources, historians strive to locate and rely on sources that are as impartial as possible. Objective sources provide a more balanced and accurate portrayal of historical events, devoid of overt personal biases or deliberate distortions. These sources often present evidence in a neutral and unbiased manner, allowing researchers to make informed interpretations.

In addition to objectivity, historians value sources that are rooted in factual information. Reliable historical sources are grounded in verifiable evidence, such as official records, eyewitness testimonies, archaeological findings, and other tangible sources of information. These sources provide a solid foundation for historical research and lend credibility to the interpretations derived from them.

However, even sources based on factual information can have limitations and biases. Therefore, historians aim to corroborate information from multiple sources to establish a more comprehensive and reliable understanding of the past. By comparing and cross-referencing different sources, historians can identify consistencies, discrepancies, and patterns, enabling them to construct a more nuanced and accurate interpretation of historical events.

In conclusion, historical sources should be approached with a critical mindset. Recognizing and analyzing biases, motivations, and weaknesses inherent in sources is crucial for developing an accurate understanding of the past. While objectivity may be difficult to achieve, striving for impartial sources rooted in factual information and corroborated by other sources enhances the credibility and reliability of historical research.

For more questions on Motivations.

https://brainly.com/question/32701862

#SPJ8

The required value f x for given adjacent angles is 7.

When two angles have a similar vertex and side, they are referred to as neighboring angles. The vertex of an angle is the point at which the rays that make up its sides come to an end. When adjacent angles have a same vertex and side, they can be a complimentary angle or supplemental angle.

The sum of the measures of the two adjacent angles is given as 135. Therefore, we can write an equation as:

(2x+45) + (3x+55) = 135

Simplifying and solving for x:

5x + 100 = 135

5x = 35

x = 7

Therefore, the value of x is 7.

To know more about Angle visit:

brainly.com/question/28451077

#SPJ1

The area of triangle PQR in this case is 14.924

In geometry, the concept of vectors is very useful when dealing with points, lines, and planes in three-dimensional space. Vectors have both magnitude and direction, and they can be added, subtracted, and multiplied by scalars.

To find a nonzero vector orthogonal to the plane through the points P, Q, and R, we can use the cross product of two vectors in the plane. A cross product of two vectors gives us a vector that is perpendicular to both of them, so it will be orthogonal to the plane as well.

Let's take the vectors from P to Q and from P to R as our two vectors:

u = Q - P = <5-3, 2-1, 4-1> = <2, 1, 3>

v = R - P = <8-3, 5-1, 3-1> = <5, 4, 2>

To calculate the cross product u x v, we can use the following formula:

u x v = <(1)(2) - (3)(4), (3)(5) - (1)(2), (1)(4) - (2)(5)> = <-10, 13, -2>

So the vector <-10, 13, -2> is orthogonal to the plane through P, Q, and R. Note that this vector is nonzero because at least one of its components is not zero.

To find the area of triangle PQR, we can use the fact that the area of a triangle is half the magnitude of the cross product of two of its sides. Let's take the sides from P to Q and from P to R again, and calculate their cross product:

u x v = <(3)(1) - (-6)(3), (-6)(2) - (3)(3), (3)(3) - (3)(2)> = <21, -21, 3>

So the vector <21, -21, 3> is orthogonal to the plane through P, Q, and R. Again, we can use the cross product of u and v to find the area of triangle PQR, which is:

|u x v| = sqrt(21^2 + (-21)^2 + 3^2) = √(891)

|u x v| = 1/2 * √(891) =14.924

To know more about Vector here.

https://brainly.com/question/29740341

#SPJ4

Answer: The number of views on the nth day can be represented by the explicit formula:

V(n) = 2000 * 2^(n-1)

where n is the number of the day and V(n) is the number of views on the nth day. The formula uses the formula for exponential growth, where the number of views on each day is double the number of views from the previous day.

Step-by-step explanation:

The equation of the line passing through the point (4, 7) and parallel to y= 1/4x + 4 is y = 1/4x + 6.

An equation is a statement that shows the equality of two expressions, generally consisting of variables and constants, joined by mathematical operations such as addition, subtraction, multiplication, division, etc.

To find the equation of a line, we need to know either two points on the line or one point and the slope of the line. In this case, we know one point (4, 7) and that the line we are trying to find is parallel to the line y= 1/4x + 4.

Parallel lines have the same slope, which means the slope of the line we are looking for is also 1/4. Now that we know the slope and one point on the line, we can use the point-slope form of the equation of a line to find the equation of the line passing through (4, 7) and parallel to y= 1/4x + 4.

The point-slope form of the equation of a line is given by:

y - y₁ = m(x - x₁)

where m is the slope of the line and (x₁, y₁) is the point on the line. Substituting the values we have, we get:

y - 7 = 1/4(x - 4)

Now we simplify this equation to get the slope-intercept form of the equation, which is y = mx + b, where m is the slope and b is the y-intercept.

y - 7 = 1/4x - 1

y = 1/4x + 6

To know more about equation here.

https://brainly.com/question/10413253

#SPJ4

Complete Question:

What is the equation of the line passing through the point (4, 7) and parallel to the line y= 1/4x + 4?

Plan A: $480/year

Plan B: $250/6 months

One year = 12 months = 6 months x 2

So, if Plan B costs $250 every 6 months, you simply have to multiply 250 by 2 which equals:

250 x 2 = 500

In conclusion, Plan A is $480/year and Plan B is $500/year.

480 < 500 so Tammy is correct, Plan B costs more.

Answer:

There will be 160 foxes after 30 years.

Step-by-step explanation:

If the population of 40 foxes doubles every 15 years, then after 15 years (one period) it will be 2 times the initial population (240 = 80), and after 30 years (two periods) it will be 2 times the population after 15 years, which is 280 = 160.

Using the given function, we can also plug in x = 2 (since 30 years is two 15-year periods) and solve for y:

y = 40 * 2^2

y = 40 * 4

y = 160

Therefore, there will be 160 foxes after 30 years.

The work is required to remove all the water by pumping it over the side will be: 54,221,971.6 ft-lbs

To calculate the work required to remove all of the water, we need to consider the gravitational potential energy of the water. The work done to remove the water is equal to the change in potential energy of the water.

First, we need to calculate the volume of the water in the pool. The pool is a cylinder with a height of 10.5 feet and a radius of 19 feet. The volume of the water is:

[tex]V = \pi r^2h = π(19ft)^2(7ft) = 2,586.6 ft^3[/tex]

Next, we need to calculate the weight of the water in the pool. The weight of the water is equal to its volume times its density. The density of Kool-Aid contaminated water is given as 65.7 lbs/ft^3. The weight of the water in the pool is:

[tex]W = Vpg = 2,586.6ft^3 * 65.7lbs/ft^3 * 32.2ft/s^2 \\\\[/tex]

     = 5,169,044.8 ft-lbs

Finally, we can calculate the work required to remove the water by pumping it over the side. Since the water is being lifted to a height of 10.5 feet, the work required is equal to the weight of the water times the height:

W = Fd = Wwater × h

    = 5,169,044.8 ft-lbs × 10.5 ft

    = 54,221,971.6 ft-lbs

Therefore, approximately 54,221,971.6 ft-lbs of work is required to remove all of the water from the pool.

To know more about pumping visit:

https://brainly.com/question/535675

#SPJ4

Answer:

a graph does have 4 quadrants

Step-by-step explanation:

the area (P,P)  (P,N)  (N,P)  (N,N)

Key: P=postive

       N=negitive

By evaluating a linear equation, we will see that the total cost for one year is $107.40

We know that an entertainment rental service charges a flat rate of $8.95 per month to rent DVDs, then if you adquire this service for x months, the total cost will be given by the linear equation:

y = 8.95*x

Here we want to find the total cost for one year, and we know that one year has 12 months, so we need to evaluate the linear equation in x = 12.

y = 8.95*12 = 107.40

The total cost is $107.40

Learn more about linear equations at:

https://brainly.com/question/1884491

#SPJ1

To find the longest baton that could fit diagonally in the box, we need to find the length of the longest diagonal of the rectangular box.

Using the Pythagorean theorem, we can find the diagonal length:

diagonal length = sqrt(6^2 + 8^2 + 6^2)

= sqrt(36 + 64 + 36)

= sqrt(136)

≈ 11.66 inches

Therefore, the longest baton that could fit diagonally in the box is approximately 11.66 inches long.

Answer:

Step-by-step explanation:

11.66 inches

After reflection, Coordinates of W'X'Y'Z' are

W'(-2, 2), X'(-2 , 4), Y' (-4, 4), and Z' (-4, 2)

A reflection is a mirror image of the shape. An image will reflect through a line, known as the line of reflection. A figure is said to reflect the other figure, and then every point in a figure is equidistant from each corresponding point in another figure. The reflected image should have the same shape and size, but the image faces in the opposite direction.

Given,

Vertices of a polygon WXYZ

W(2, 2), X(2, 4), Y(4, 4), and Z(4, 2)

There is reflection over y-axis

For reflection over y - axis , y=f(-x)

Thomas reflected y coordinate y → -y

but x coordinate should be reflected, then x → -x

W(2, 2) → W'(-2, 2)

X(2, 4) → X'(-2 , 4)

Y(4, 4) → Y' (-4, 4)

Z(4, 2) → Z' (-4, 2)

Hence, W'(-2, 2), X'(-2 , 4), Y' (-4, 4), and Z' (-4, 2) are coordinates of W'X'Y'Z'

Learn more about reflection here:

https://brainly.com/question/30270479

#SPJ1

The length of the paper should be taken as the average of the two measurements, which is l = (298 + 294) / 2 = 296 mm.

The uncertainty in the length measurement can be estimated as half of the difference between the two measurements, which is δl = (298 - 294) / 2 = 2 mm. So, the value for l and δl can be expressed as l ± δl = 296 ± 2 mm.

Since the two measurements of the width both give the same value of 210 mm, we can assume that the width measurement has no uncertainty. The value for w and δw can be expressed as w ± δw = 210 ± 0 mm.

The area of the paper can be calculated as A = w × l = 210 × 296 = 62040 mm^2.

The uncertainty in the area can be estimated as the product of the uncertainties in the length and width measurements, which is δA = δw × l + w × δl = 0 × 296 + 210 × 2 = 420 mm^2. So, the area and its uncertainty can be expressed as A ± δA = 62040 ± 420 mm^2.

You can read more about measuring length at https://brainly.com/question/1578168

#SPJ4

Answer:

2.375

Step-by-step explanation:

The variables s, m, n, and y in this question are challenging to interpret without additional context. On the other hand, if y is a constant and s, m, and n are functions of w(1) and w(2)

With regard to w(1), esm's partial derivative is as follows:

Each of these partial derivatives can be calculated using the differentiation chain rule and the variables s, m, n, and y in this question are challenging to interpret without additional context. On the other hand, if y is a constant and s, m, and n are functions of w(1) and w(2):

∂(esm)/∂(w(1)) = yn * exp(-yn * n) * (-m) * 1/(1 + exp(-s)) * exp(s) / (1 + exp(s))^2 * x1

∂(esm)/∂(w(2)) = ∂(esm)/∂(n) * ∂(n)/∂(m) * ∂(m)/∂(s) * ∂(s)/∂(w(2))

∂(esm)/∂(w(2)) = yn * exp(-yn * n) * (-m) * 1/(1 + exp(-s)) * exp(s) / (1 + exp(s))^2 * x2.

Learn more about variables here:

https://brainly.com/question/17344045

#SPJ4

Answer:

a number which produces a specified quantity when multiplied by itself

Step-by-step explanation:

The square root of a number is a value that, when multiplied by itself, gives the original number. For example, the square root of 9 is 3, because 3 x 3 = 9. The symbol for the square root is "√". So, √9 = 3.

There are two types of square roots: the principal square root and the negative square root. The principal square root is the positive value that, when multiplied by itself, gives the original number. The negative square root is the negative value that, when multiplied by itself, gives the original number. For example, the square roots of 9 are 3 and -3, because both 3 x 3 = 9 and -3 x -3 = 9.

The square root of a number can be approximated using a calculator or can be found using mathematical techniques such as the Newton-Raphson method. The square root of a number can also be expressed as an irrational number, meaning that it cannot be expressed as a fraction of two integers. For example, the square root of 2 is an irrational number that cannot be expressed exactly as a fraction.

Sample Means will vary from sample to sample even if all the samples are identical in size and all these samples are favored from the same population. Thus the statement in the question is true.

The sample means would differ from sample to sample, and a histogram might be used to depict their dispersion. We call this distribution the sample distribution. We refer to it as "sampling" since it is the distribution that results from "sampling" frequently. The size of the samples will determine how variable the sample means are, as bigger samples are more likely to produce estimated means that are more closely aligned with the population's actual mean.

For any given sample, the mean, median, minimum, maximum, or any other statistic may deviate from the population. Here, tools like the t-test may be used to assess if the difference between the sample and the population is statistically significant.

Learn more about Sample Means at

brainly.com/question/30023845

#SPJ4

Answer:

x = 30/7 = 4 2/7

Step-by-step explanation:

150 = 35x

35x = 150

x = 150/35

x = 30/7

x = 4 2/7

Answer:

x = 30/7 =4 2/7 or 4.2

Step-by-step explanation:

tell me love brainiest.

Answer: 10

Step-by-step explanation:

Answer: 4.

Step-by-step explanation:

1/3 of 12?

12 divided by 3 = 4.

The Midpoint method is similar to Heun's method, but the equation becomes[tex]x_n+1 = x_n + hf(x_n + 0.5h, t_[/tex]

Euler's method is used to approximate the solution of a differential equation using a step size, h. The numerical solution is calculated using [tex]x_n+1 = x_n + hf(x_n, t_n)[/tex], where f is the derivative of x with respect to t. In this case, the equation becomes [tex]x_n+1 = x_n + 0.5(4e^(0.8t_n) - 0.5x_n)[/tex], where [tex]x_n[/tex] is the value of x at [tex]t_n[/tex] and [tex]x_n+1[/tex] is the value of x at[tex]t_n+0.5.[/tex]

Heun's method is also used to approximate the solution of a differential equation. Here, the equation becomes [tex]x_n+1 = x_n + 0.5(f(x_n, t_n) + f(x_n+1, t_n+0.5)),[/tex] where [tex]x_n+1[/tex] is estimated using the Euler's method.

The Midpoint method is similar to Heun's method, but the equation becomes[tex]x_n+1 = x_n + hf(x_n + 0.5h, t_[/tex]

Learn more about Midpoint method here:

https://brainly.com/question/28667736

#SPJ4

The correct statements are regarding Ideal gas are: The heat capacity of an ideal gas does not depend on what molecules the gas is made of. A cyclic path (initial state = final state) always results in ΔU = 0.

"The internal energy of an ideal gas depends only on the temperature of the system." False, it depends on both temperature and the number of particles in the system.

"The internal energy of any gas depends only on the temperature of the system. "False, it also depends on the volume and pressure of the system, which can vary based on the type of gas and the conditions.

"At constant temperature, the internal energy of a real gas increases with increasing pressure because molecules are closer together. We assume that the conditions are such that attractions dominate over repulsions (i.e. the pressure values are not too high)." False, the statement should say that the internal energy decreases with increasing pressure, not increases.

"ΔU = 0 for any process that does not result in a change in temperature."False, ΔU can be non-zero even if there is no change in temperature, as long as there is a change in volume or pressure.

"ΔU = qv only for a monoatomic ideal gas." False, ΔU = q + w, where q is the heat added to the system and w is the work done on the system. The equation ΔU = qv only holds for a monoatomic ideal gas undergoing an isothermal expansion or compression.

To know more about Ideal gas:

https://brainly.com/question/14934878

#SPJ4

Answer:

Below

Step-by-step explanation:

This is not as complicated as it seems ....

The cyclists combined speed is (6+4) = 10 mi/hr

   they will cover the 10 miles between them in   10 miles / 10 mi/hr = 1 hr

So the Fly  buzzes around at 5 mi/hr  and covers 5 miles in the one hour.

Answer:

40 ft

Step-by-step explanation:

We know the measurements of the field so just add all the numbers up.

2 + 2 + 18 + 18 = 40 ft.

a) Either 3 or 4 questions did Mike answer correctly.

b) Either 7 or 8 questions did Sheila answer correctly.

In its simplest form in algebra, the definition of an equation is a mathematical statement that shows that two mathematical expressions are equal. For instance, 3x + 5 = 14 is an equation, in which 3x + 5 and 14 are two expressions separated by an 'equal' sign.

a) Let mike did x correct

then, incorrect will be (10- x)

The equation is:

Now, 5x + (10 - x) (-3) = 0

=> 5x - 30 + 3x = 0

=> 8x = 30

=> x = 30/8

=> x > 3 and x < 4

b) Let Sheila did y correct

then, incorrect = (10 - y)

Now, 5y + (10 - y) (-3) = 32

=> 5y - 30 + 3y = 32

=> 8y = 62

=> y > 7 and y< 8

Learn more about Equation at:

https://brainly.com/question/29657992

#SPJ4

The given question is incomplete, complete question is:

In a school test consisting of 10 questions, 5 points are awarded for a correct answer but 3 points are deducted for an incorrect answer.

A blank answer scores (). Mike scored a total of () and he did not leave all of the answers blank. (a) How many questions did Mike answer correctly? _ _ _ _ _ _ _ _ Sheila scored a total of 32. (b) How many questions did Sheila answer correctly?

Answer:

second option

Step-by-step explanation:

x² + 4x + 12 = 0 ( subtract 12 from both sides )

x² + 4x = - 12

to complete the square

add ( half the coefficient of the x- term)² to both sides

x² + 2(2)x + 4 = - 12 + 4

(x + 2)² = - 8 ( take square root of both sides )

x + 2 = ± [tex]\sqrt{-8}[/tex] = ± [tex]\sqrt{4(2)(-1)}[/tex] = ± ([tex]\sqrt{4}[/tex] × [tex]\sqrt{2}[/tex] × [tex]\sqrt{-1}[/tex] ) = ± 2[tex]\sqrt{2}[/tex] i

subtract 2 from both sides

x = - 2 ± 2[tex]\sqrt{2}[/tex] i

then

x = - 2 + 2[tex]\sqrt{2}[/tex] i , x = - 2 - 2[tex]\sqrt{2}[/tex] i

The answer given question : Is 50%,probability of each child inheriting two copies of the mutated gene is 25%.  And the Overall, without additional information about the genetic makeup of the second-generation partners, it is impossible to determine the exact probability of occurrence of PKU in their children.

phenylketonuria (PKU) is an inherited disorder caused by a mutation in a gene that produces an enzyme called phenylalanine hydroxylase. This enzyme is necessary for the breakdown of the amino acid phenylalanine, and without it, phenylalanine can build up to toxic levels in the body, leading to brain damage and other serious health problems.

PKU is an autosomal recessive disorder, which means that a person must inherit two copies of the mutated gene (one from each parent) in order to develop the condition. If only one copy of the mutated gene is inherited, the person is a carrier of the disorder but does not develop PKU.

Given that one of the four children in the first generation has PKU, we can assume that both parents are carriers of the disorder.  The probability of each of their children inheriting a single copy of the mutated gene (i.e., becoming carriers like their parents) is 50%, and the probability of each child inheriting two copies of the mutated gene (i.e., developing PKU) is 25%.

The occurrence of PKU in the second generation will depend on the genetic makeup of the partners who have children. If both partners are carriers, there is a 25% chance that each of their children will develop PKU. If one partner is a carrier and the other is not, there is no chance that their children will develop PKU, but each child will have a 50% chance of being a carrier

To learn more about probability:

https://brainly.com/question/24756209

#SPJ4

∠ECB and ∠ACB are the angles.

An angle is formed when two lines or rays meet at the common vertex. The angle is represented by ∠ and it is measure in °.

In the given figure,  

The line FA and BD intersects at the point C.

When two lines intersect at the same vertex it makes an angle.

So there is an angle at the point C.

From the given options, the angles are ∠ECB and ∠ACB.

Option (i) and (iv) is the correct option.

Hence,  ∠ECB and ∠ACB are the angles.

Learn more about angles here:

https://brainly.com/question/14690981

#SPJ9

Answer: z > -11/9

Step-by-step explanation:

7z + 7 > -2z - 4

+2z        +2z

9z + 7 > -4

     -7     -7

9z > -11

/9     /9

z > -11/9