Magnetism is a mysterious force in this universe. Scientists don't fully understand why it occurs in the first place. They aren't sure why these particles have a north and south direction either, according to Live Science, and there are many different forms of magnetism.
What are magnets ?Anything that creates a magnetic field is considered to be a magnet. The most notable characteristic of a magnet is a force that pulls on other ferromagnetic materials, such as iron, steel, nickel, cobalt, etc., and attracts or repels other magnets. This invisible magnetic field is responsible for this property.
A substance or object that generates a magnetic field that has the potential to impact objects nearby. Magnetic materials, such as iron, are drawn to a magnet. A magnetic field is always present in permanent magnets. One of a magnet's two poles is its centre of the magnetic field.
Learn more about Magnets here:
https://brainly.com/question/14997726
#SPJ4
Suppose that you lift an object by exerting an upward force of 22 Newtons on it. If gravity exerts a force of 10Newtons downward on the object, what is the total force on the object?a. 120 Newtons.b. 22 Newtons.c. 12 Newtons.d. 2 Newtons.e. 10 Newtons
The total force on the object is 12 Newtons. The answer is (c).
The upward force you exert on the object is 22 Newtons, and it acts in the upward direction. The downward force of gravity on the object is 10 Newtons, and it acts in the downward direction. The total force on the object is the vector sum of these two forces.
Since the upward force and the downward force act in opposite directions, we can find the total force by subtracting the magnitude of the downward force from the magnitude of the upward force,
Total force = Upward force - Downward force
Total force = 22 N - 10 N
Total force = 12 N
To know more about the force, here
https://brainly.com/question/30630945
#SPJ4
why are there significantly more thunderstorms in florida than in california?
Florida is wet and humid, while California is dry and non-humid. Florida also contains lots of lakes which evaporate to create thunderstorms. Due to Florida's smaller size compared to California, there are more thunderstorms there than in California.
A thunderstorm is often referred to as an electrical storm or a lightning storm. It is defined as a storm characterized by the presence of lightning and its acoustic effect on the Earth's atmosphere, known as thunder. Weak thunderstorms are sometimes called thundershowers.
Some places experience thunderstorms more frequently than others. The state of Florida is smaller than the state of California which is why more thunderstorms occur in Florida than in California.
As Florida is smaller than California, there are therefore more thunderstorms in Florida than in California.
To know more about thunderstorms:
https://brainly.com/question/21786097
#SPJ4
The increasing concentration of oxygen in Earth's early atmosphere A. was fatal to numerous eukaryotes because of their mitochondria. B. conferred a selective advantage on eukaryotes that possessed chloroplasts. C. conferred a selective advantage on prokaryotes because of their stiff membranes. D. was favorable to numerous prokaryotes because of their flexible membranes.
Prokaryotes benefited from the growing oxygen concentration in the early atmosphere of Earth because of their rigid membranes.
What property of eukaryotes allows endosymbiosis?Circular DNA is found in bacteria, a prokaryote, as well as mitochondria and chloroplasts. The Endosymbiotic Theory is bolstered by this.
How were eukaryotes formed?Studies of mitochondria and chloroplasts, which are assumed and believed by some to have evolved from bacteria residing in big cells, are particularly helpful in supporting the idea or hypothesis that eukaryotic cells originated from an endosymbiotic association of prokaryotes. According to the dominant and more popular explanation, known as the endosymbiotic theory, eukaryotes developed when an ancient Archaean cell fused with an aerobic, ancient bacterial cell (without actually eating it).
To learn more about prokaryotes and eukaryotes visit:
brainly.com/question/982048
#SPJ1
An electron beam is aimed at two closely spaced slits. The beam is attenuated to produce only one electron per minute?
that the electrons are being emitted one at a time. This is known as the single-electron or single-particle interference experiment.
what happens when single electron is emitted ?
When a single electron is emitted, it will pass through one of the slits and create an interference pattern on a screen located behind the slits. The interference pattern will be a series of bright and dark fringes that result from the constructive and destructive interference of the electron waves passing through the two slits.
It's worth noting that in the single-electron interference experiment, the electron behaves both as a wave and as a particle. When the electron is emitted, it is in a superposition of states, meaning that it is simultaneously passing through both slits. However, once the electron interacts with the screen, it collapses into a single state, and we observe it as a particle at a specific location on the screen.
the electron beam is attenuated to produce only one electron per minute, then we can assume that the electrons are being emitted one at a time. This is known as the single-electron or single-particle interference experiment.
This phenomenon is known as wave-particle duality and is a fundamental principle of quantum mechanics.
To learn more about electron follow the given link: https://brainly.com/question/13998346
#SPJ1
Two steel balls that are the same mass and size are rolled with the same force across different level surfaces. The ball rolling across carpet will come to a stop faster than the one rolling across concrete because of.
The ball rolling across the carpet will come to a stop faster than the one rolling across the concrete because of friction. Thus, B is the correct option.
The frictional force is the resistance force experienced by a moving object on a surface as a result of the opposing tendency of the surface.The smoother a surface is, the lower the frictional force it provides, and the more frictional force it offers, when the surface coarse is more.
Two steel balls would experience similar forces when rolling on two different surfaces. However, a carpeted surface is more coarse and irregular than a concreted surface.
Thus, the frictional force acting on the carpeted surface would be more and the ball would stop faster as opposed to the concrete surface.
To learn more about ball rolling,
brainly.com/question/24930363
The correct question is:
Two steel balls that are the same mass and size are rolled with the same force across different level surfaces.The ball rolling across carpet will come to a stop faster than the one rolling across concrete because of
A) air resistance.
B) friction.
C) gravity.
D) speed
If the electric force between two equally charged objects is 190 N when they are separated by a distance of 1,540 m,
what is the charge on each object?
Round answers to three decimal places
Upon rounding to three decimal places, the charge on each object is approximately 0.000004039 C.
What is Coulomb's constant?Coulomb's constant, denoted by k, is a proportionality constant that appears in Coulomb's law, which describes the electrostatic force between two electrically charged particles. The value of Coulomb's constant in a vacuum is approximately 8.98755 x 10⁹ N·m²/C².
The electric force between two charged objects is given by Coulomb's law:
F = k × (q1 × q2) / r²
where F is the electric force, q1 and q2 are the charges on the two objects, r is the distance between them, and k is Coulomb's constant, which has a value of 8.98755 × 10⁹ N·m²/C².
In this case, we have:
F = 190 N
r = 1,540 m
k = 8.98755 × 10⁹ N·m²/C²
q1 = q2 (since the objects are equally charged)
We can rearrange Coulomb's law to solve for the charge on each object:
q = sqrt(F × r² / k)
Substituting the given values, we get:
q = sqrt(190 N × (1,540 m)² / (8.98755 × 10⁹ N·m²/C²))
q ≈ 4.039 × 10⁻⁶ C.
To know more about Coulomb's constant, visit:
https://brainly.com/question/30196309
#SPJ1
Rank the following in order of decreasing wavelength
1.infrared radiation 2 radio waves 3 ultraviolet light 4 visible light gamma rays
The electromagnetic spectrum is arranged in the order of increasing frequency. The decreasing order of wavelength of the radiations is radio radio waves, infrared, visible light, uv rays and gamma rays.
What is electromagnetic spectrum ?The electromagnetic spectrum is the arrangement of waves in the order increasing frequency or decreasing wavelength. The order of the spectra starts from radio waves, microwaves, infrared, visible light, ultraviolet, x -rays and gamma rays.
The visible light that we can see is in between IR and UV rays. Hence, visible light has a frequency greater than IR rays but shorter than IR. Similarly visible light is longer than UV- rays but less frequency than UV rays.
Gamma rays are the most energetic and shorter waves in the electromagnetic spectrum with smaller wavelength and greater frequency. Hence, the order of decreasing wavelength is 2, 1, 4, 3, 5.
Find more on electromagnetic waves:
brainly.com/question/25559554
#SPJ1
Explain the relationship between the tracking ability of a solar pv system and its energy production.
Trackers can growth a PV system's production via up to 40% greater than a fixed-tilt array by using retaining consistent direct daylight exposure to the module. The range of the project and the form of tracker determine the quantity of productivity development over a fixed gadget.
A PV (photovoltaic) system is a type of renewable energy system that converts sunlight into electricity using solar panels. The solar panels are typically made of silicon cells that absorb the energy from the sun and convert it into direct current (DC) electricity. This DC electricity is then converted into alternating current (AC) electricity using an inverter, which can be used to power homes, businesses, and other electrical devices.
PV systems can be designed to be grid-tied, off-grid, or hybrid. Grid-tied systems are connected to the utility grid and allow excess electricity to be sold back to the utility company. Off-grid systems are independent of the utility grid and use battery storage to provide electricity when the sun is not shining. Hybrid systems combine both grid-tied and off-grid components to provide reliable power even in the event of a power outage.
To learn more about PV system's visit here:
brainly.com/question/28222743
#SPJ4
Complete Question: -
Explain the relationship between the tracking ability of a solar PV system and its energy production. Simulated energy production for one kilowatt of solar PV capacity in Los Angeles, Calif. hourly average production by season, watthours
800
700
600
500
400
300
200
100
0
4 8 12 16 20 p 4 8 12 16 20 4 8 12 16 20
winter
summer
spring
(Mar-May)
(Dec-Feb)
(Jun-Aug)
Adnun
PV array facing south at fixed tilt
4 8 12 16 20
fall
(Sep-Nov)
Aion Axis of rotation
2
One axis tracking PV array
with axis oriented south.
tracking.
dual-axis
tracking.
single-axis
afted south
no tracking.
sited south
no tracking.
fat
Axis of rotation
Two-axis tracking PV array
ela
18. After chemical weathering, what is true about the chemical makeup of the weathered rock?
A. It is different than that of the original rock.
B. It is the same as the original rock.
C. It is more affected by mechanical weathering.
D. It could either be changed or stay the same.
The true statement is about the chemical makeup of the weathered rock is "It is different than that of the original rock.
option A.
What is chemical weathering?Chemical weathering is a process that involves the breakdown of rocks and minerals through chemical reactions with the surrounding environment. This process occurs due to the interaction of rock minerals with water, atmospheric gases, and organic acids, which can lead to the breakdown of the mineral structure of the rock.
Chemical weathering involves the breakdown of rocks and minerals through chemical reactions with water, oxygen, and other substances in the environment. As a result of these reactions, the chemical makeup of the weathered rock can be altered, and it may have different physical and chemical properties than the original rock.
Therefore, option A is the correct answer.
Learn more about chemical weathering here: https://brainly.com/question/829782
#SPJ1
however, they did not measure stellar parallaxâthe stars did not appear to move back and forth at all over the course of a year. what is the most likely reason for this apparent lack of motion?
The lack of apparent motion of the stars is due to the vast distances involved, and not to any shortcomings in the observation techniques or instruments used such as stellar parallax.
What is Stellar Parallax?Stellar parallax is the apparent shift in the position of a nearby star relative to more distant background stars as observed from Earth, caused by the Earth's orbit around the sun. In other words, as the Earth moves in its orbit around the sun, the perspective from which we view nearby stars changes, causing those stars to appear to move slightly against the more distant background stars.
The amount of this apparent shift is directly proportional to the distance of the star from the Earth. The closer the star, the greater the parallax. By measuring the parallax of a star, astronomers can determine its distance from the Earth with a high degree of accuracy.
Stellar parallax provides one of the most direct and reliable methods for determining the distances to nearby stars and is a key tool in the study of the structure and evolution of the Milky Way galaxy and the universe as a whole.
The most likely reason for the apparent lack of motion of the stars is due to the great distances between Earth and the stars. Stellar parallax is the apparent shift in the position of a star as observed from two different points in Earth's orbit, such as from opposite sides of the Earth's orbit around the sun. This apparent shift is caused by the change in the observer's perspective as the Earth moves.
To know more about Stellar Parallax, visit:
https://brainly.com/question/14315796
#SPJ4
Which of the following would be considered an emergency fund expense?
Lost cell phone
Video game sale
Blown car tire
Shoe sale
Out of the given options, only "Blown car tire" would be considered an emergency fund expense.
What is an emergency fund expense?An emergency fund expense is an unforeseen and urgent cost that requires immediate attention and cannot be easily covered by one's regular income or savings.
Examples of emergency fund expenses may include unexpected car repairs, medical bills, or sudden job loss. The purpose of an emergency fund is to provide a financial cushion that can help cover these types of expenses, allowing individuals to manage unexpected financial shocks without having to resort to high-interest debt or deplete their long-term savings.
Learn more about emergency fund expense, here:
https://brainly.com/question/30662508
#SPJ1
What is the surface area of a cube that has a side length of 2. 2 meters? use the formula , where sa is the surface area of the cube and s is the length of each side. 13. 2 26. 4 29. 04 174. 24.
The surface area of a cube with a side length of 2.2 meters is 26.4 square meters. This can be calculated using the formula SA = 6s^2, where s is the length of each side.
The surface area of a three-dimensional object is a measure of the total area of all its faces combined. In the case of a cube, there are six faces, each with an area equal to the square of the side length. To find the surface area of a cube, we multiply the area of one face by six.
Using this formula, the surface area of a cube with a side length of 2.2 meters is found by squaring the side length, which gives us 4.84 and then multiplying that by six to give us 29.04 square meters.
Learn more about three-dimensional
brainly.com/question/2400003
#SPJ4
how to find rpm to rad s
RPM (revolutions per minute) is 31.42 radians per second
To convert from RPM (revolutions per minute) to rad/s (radians per second), you can use the following conversion formula:
rad/s = RPM x (2π/60)
where 2π represents the number of radians in a full circle, and 60 represents the number of seconds in a minute.
Revolutions Per Minute is the acronym for this term. It involves figuring out how frequently an object rotates, or how many revolutions or turns it makes each minute. It illustrated how frequently an involuntary component spins around its axis in a minute. RPM, then, is the frequency or speed of an involuntary object's rotation about a fixed axis, such as the crankshaft of an engine, a turbine power generator, a DVD or CD player, or a turbocharger.
Here's an example:
If you have an object rotating at 300 RPM, you can find its angular velocity in radians per second as follows:
rad/s = 300 x (2π/60) = 31.42 rad/s
The angular velocity of the object is 31.42 radians per second.
To learn more about radians per second :
https://brainly.com/question/29076790
#SPJ4
How many crankshaft revolutions in degrees is needed to complete 4-strokes? A. 180. B. 360. C. 90.
D. 720.
The crankshaft completes one complete 360-degree rotation for each of the four equal strokes that make up the cycle. Every stroke of a camshaft involves a full rotation of 90 degrees.
What does a crankshaft accomplish?In essence, the internal combustion engine's crankshaft serves as its support structure. The crankshaft is in charge of turning a linear motion into a rotational motion and ensuring that the engine runs properly.
How can you know if your crankshaft is broken?If the engine is knocking or has low oil pressure, you should take note of it (from a gauge or warning light). When things become bad enough, the engine will just quit. Immediately stop your automobile and turn off the engine if you see any of these symptoms.
To know more about Crankshaft visit:
https://brainly.com/question/29801615
#SPJ4
A 1250 kg car has four 12 kg wheels. When the car is moving, what fraction of its total kinetic energy is due to rotation of the wheels about their axles? Assume that the wheels have the same rotational inertia as uniform disks of the same mass and size.
Answer:
The total kinetic energy of the car can be divided into two parts: translational kinetic energy, due to the car's motion as a whole, and rotational kinetic energy, due to the rotation of the wheels about their axles.
The translational kinetic energy of the car is given by:
KE_translational = (1/2)mv^2
where m is the mass of the car and v is its speed.
The rotational kinetic energy of each wheel can be calculated as:
KE_rotational = (1/2)Iω^2
where I is the moment of inertia of a wheel and ω is its angular velocity.
The moment of inertia of a uniform disk is given by:
I = (1/2)mr^2
where m is the mass of the disk and r is its radius.
The mass of each wheel is given as 12 kg, so the moment of inertia of each wheel is:
I = (1/2)(12 kg)(0.5 m)^2 = 1.5 kg·m^2
Assuming that the wheels are rolling without slipping, the angular velocity of each wheel can be related to the speed of the car by:
v = rω
where r is the radius of the wheel.
Solving for ω, we get:
ω = v/r
Substituting this expression into the equation for KE_rotational, we get:
KE_rotational = (1/2)(1.5 kg·m^2)(v/r)^2
Simplifying, we get:
KE_rotational = (3/8)mv^2
So the rotational kinetic energy of each wheel is (3/8) of the translational kinetic energy of the car.
The total rotational kinetic energy of all four wheels is therefore:
KE_total_rotational = 4 KE_rotational = (3/2)mv^2
The total kinetic energy of the car is:
KE_total = KE_translational + KE_total_rotational = (5/2)mv^2
So the fraction of the total kinetic energy of the car that is due to the rotation of the wheels about their axles is:
KE_total_rotational / KE_total = (3/5) = 0.6
Therefore, 60% of the car's total kinetic energy is due to the rotation of the wheels about their axles.
What is the distance between the points (5, 14) and (18, 3)? clear check 6. 9 units 17. 03 units 28. 6 units 290 units.
The distance between the points (5, 14) and (18, 3) is 17.03 units
To find: PQ=?distance between two points = [tex]\sqrt{(x2-x1)^{2} +( y2-y1)^{2} }[/tex]
PQ = [tex]\sqrt{(18-5)^{2} +( 3-14)^{2} }[/tex]
PQ = 17.03 units
How do I find the distance between 2 points?
Discover the distance formula, a Pythagorean theorem application, to determine the separation between two places. To get the separation between any two points, we may rewrite the Pythagorean theorem as d=((x 2-x 1)2+(y 2-y 1)2).
Hence 17.03 units is a correct answer.
To know more about similar question follow link
https://brainly.com/question/30419540
#SPJ4
A very long cylindrical wire of radius R carries a current I0 uniformly distributed across the cross-section of the wire. Calculate the magnetic flux through a rectangle that has one side of length w running down the centre of A. 4πμ0I0×wR
B. 4πμ0I0w
C. 4πwμ0I0R
D. None of these
The magnetic flux through a rectangle (A very long cylindrical wire of radius R carries a current I0 uniformly distributed across the cross-section of the wire) that has one side of length w running down the centre =
(µ0 / 4π) x (I0) x (R/W) option C.
Let's take a look at the figure of a rectangular strip with width dr.
The ampere's law can be used to determine the magnetic field B at the element.
To determine the magnetic flux, the equation:
φ = (µ0 / 4π) x (I0) x (R²/WR)
= (µ0 / 4π) x (I0) x (R/W)
Where,
I = the current
φ = the magnetic flux
W = the length
L = another side
Learn more about magnetic field here: https://brainly.com/question/30590834
#SPJ4
Calculate the force that was used if a box was moved 15 meters with 85 Joules of work done
on it.
(Show work please)
The force requires to displace the object by 15 meters will be 5.67 N.
What is work?Work is defined as the energy transferred to or from an object by applying force along a displacement. In its most basic form, work equals the product of force strength and distance travelled for a constant force aligned with the direction of motion.
Given that the object is displaced by 15 meters and the work done is 85 Joules.
The force will be calculated as:
Work = Force x Displacement
Force = Work / Displacement
Force = 85 / 15
Force = 5.67 N
Therefore, the force will be 5.67 N.
To know more about work follow
https://brainly.com/question/352472
#SPJ1
why is it necessary that a force probe be calibrated?
Without calibration, the data would no longer be accurate since it would deviate from real values. Therefore, calibration is occasionally required.
A force probe measures weight in what ways?It converts an applied mechanical force—such as load, weight, tension, compression, or pressure—into another physical variable—in this case, an electrical output signal—that can be measured, converted, and standardized. The electrical signal changes in direct proportion to the force acting on the sensor.
What function does a force sensor serve?A load cell or weight sensor is often referred to as a force sensor. They are employed to gauge load, strain, and compression. A lot of them contain internal strain gauges that are attached to the metal structure and respond even to the smallest compression changing the resistance and reporting on the outcomes.
To know more about resistance visit:-
https://brainly.com/question/29427458
#SPJ4
What's the AP physics 2 equation sheet?
The AP physics 2 equation sheet is a reference sheet that contains all of the important equations and formulas that are commonly used in the AP physics 2 exam. It is provided to students during the exam, and they are allowed to use it as a reference while answering questions.
The equation sheet includes equations for topics such as electric force, electric potential, electric field, magnetic force, magnetic field, optics, and thermodynamics. It also includes important constants, such as the speed of light and the charge of an electron.
The equation sheet can be found on the College Board website, and it is recommended that students become familiar with it before taking the exam. This will help them to quickly find the equations they need and to use them effectively during the exam.
In conclusion, the AP physics 2 equation sheet is an important resource for students taking the AP physics 2 exam. It contains all of the important equations and formulas that students need to know, and it is provided to them during the exam to use as a reference.
To learn more about equation refer here:
https://brainly.com/question/29657992#
#SPJ11
A uniform electric field of magnitude 47.6N/C is parallel to the x axis. A circular loop of radius 17.7cm is centered at the origin with the normal to the loop pointing 67.9∘ above the x axis.
Part (a) Calculate the electric flux in, newton squared meters per coulomb, through the loop.
Φ = N⋅m2/C
Part (b) To what angle, in degrees from the positive x axis, should the normal of the loop be rotated so that the flux through the loop becomes 0.304N⋅m2/C?
θ′ =∘
The electric flux that flows through the loop is 4.27 Nm²/C, and the loop's normal ought to be rotated by about 39.5 degrees.
Flux electric: Which is it?Electric flux is a characteristic of an electric field and refers to the number of electric field lines that cross a specific area. Electric field lines, according to this theory, begin with positive electric charges and end with negative electric charges.
Part a: The following formula must be used to determine the electric flux through the loop:
= E A cos() Since the electric field is parallel to the x-axis and the loop is circular, the area of the loop can be calculated as follows:
By substituting the given values for A = r², we obtain:
A = (0.177m)² = 0.0985 m² = 67.9° = 1.184 radians = (47.6 N/C) (0.0985 m²) cos(1.184) 4.27 Nm²/C Part (b) In order to determine the angle at which the flux through the loop becomes 0.304 Nm²/C, we can rewrite the equation for electric flux to account for:
= cos(-1)(/(EA))) By substituting the values provided, we obtain:
= cos(-1)(0.304 Nm²/C / (47.6 N/C 0.0985 m²)) = 39.5°; consequently, the loop's normal should be rotated by approximately 39.5°.
What does electric flux mean?electric flux is a property of an electric field that can be described as the number of electric lines of force—also known as electric field lines—that cross a specific area. Electric field lines are thought to start with positive electric charges and end with negative electric charges.
Learn more about electric flux:
brainly.com/question/26289097
#SPJ1
PLEASE HELP I NEED TO PASS THIS CLASS
How do you make a saturated solution?
Why does slower cooling result in purer crystals?
How do you think crystals with more impurities will look compared to crystals with fewer impurities?
The impurity molecules have time to return to the solution if they don't fit the environment well. To create a very saturated solution, keep adding solute to the solution up until a point where it manifests as a solid precipitate or crystals.
Explain cooling in detail.A decreased temperature and/or a phase shift are typically the results of cooling, which is the removal of heat. Cooling can also refer to any method of reducing temperature. The exchange of thermal energy can take place by convection, heat conduction, or thermal radiation.
How does the cooling process work?Ice can turn into liquid water if it's heated up enough. A substance's molecules move more quickly when it is heated. A substance's molecules travel more slowly as it is cooled.
To know more about Cooling visit:
https://brainly.com/question/28538811
#SPJ1
An NaCl solution is prepared by dissolving 20.0 g NaCl in 150.0 g of water at 25°C. What is the vapor pressure of the solution if the vapor pressure of water at 25°C is 23.56 torr? a.0.9304 torr
b.0.4746 torr c.21.77 torr d.0.8950 torr e.22.63 torr
According to the statement, the vapor pressure of the NaCl solution is 22.63 torr.
To calculate the vapor pressure of the NaCl solution, we need to first calculate the mole fraction of water in the solution:
moles of water = mass of water / molar mass of water
moles of water = 150.0 g / 18.015 g/mol = 8.32 mol
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of NaCl = 20.0 g / 58.44 g/mol = 0.342 mol
total moles = moles of water + moles of NaCl = 8.32 mol + 0.342 mol = 8.662 mol
X(water) = moles of water / total moles = 8.32 mol / 8.662 mol = 0.9603
Next, we can use Raoult's law to calculate the vapor pressure of the solution:
P = X(water) * P°(water)
Where P°(water) is the vapor pressure of pure water, which is given as 23.56 torr.
P = 0.9603 * 23.56 torr = 22.63 torr
Learn more about NaCl solution:
https://brainly.com/question/28123588
#SPJ4
By what amount does the sound intensity decrease when the distance to the source triples?.
The sound intensity, or sound power, decreases by a factor of nine (9) when the distance to the source triples.
What is sound intensity?Sound intensity is the rate of energy transfer per unit area and per unit time in the form of sound waves. It can be measured in units of watts per square meter (W/m2). Sound intensity is proportional to the square of the sound pressure level and is inversely proportional to the distance from the source. Sound intensity decreases with increasing distance from the source and increases with the sound pressure level.
This is due to the inverse-square law, which states that the sound intensity decreases inversely proportional to the square of the distance from the source. This means that as the distance from the source increases, the sound intensity decreases by the square of that distance. In this case, when the distance is tripled, the sound intensity decreases by a factor of nine (9).
To learn more about sound intensity
https://brainly.com/question/17062836
#SPJ4
What is amplitude
a measure of?
Answer:
Height
Explanation:
Amplitude is the height of a wave above the x-axis.
When illuminated with monochromatic light, a double slit produces a pattern that is a combination of single-slit diffraction and double-slit interference. This can be easily seen if the separation between the slits and the size of slits are related by simple fractions.
Find the ratio of the width of each slit to the separation between the slits, if the first minimum of the single-slit pattern falls on bright fringe number 3 of the double-slit pattern. (This will greatly reduce the intensity of that maximum of the double-slit pattern.)
The ratio is k: d= 1 : 3
From the question, we are told that
The first minimum of the single-slit pattern falls on the fifth maximum of the double-slit pattern.
Generally, the condition for constructive interference for a single slit is
ksin(θ) = nλ
Here k is the width of the slit and n is the order of the fringe and for a single slit n = 1 (cause we are considering the first maxima)
Generally, the condition for constructive interference for a double slit is
ksin(θ) = mλ
Here d is the separation between the slit and m is the order of the fringe and for the double slit m = 5
dsinθ = 5λ
so,
ksin(θ)/ dsin(θ) = λ/5λ
=
so, k : d= 1 : 3
Hence k: d= 1 : 3 is the correct answer.
To know more about Ratio follow the link:
https://brainly.com/question/18956877
#SPJ4
Around 1910, two astronomers named hertzsprung and russell discovered a relationship that the stars in the main sequence have in common. what is this relationship?
Stars with greater temperatures tend to have lower magnitudes
resourcesquizalizecom
they made the HR Diagram
which of these is the largest continuous sand desert in the world?
The largest continuous sand desert in the world is the Sahara Desert, located in Northern Africa.
The largest continuous sand desert in the world is the Sahara Desert, located in Northern Africa. It covers an area of about 3.6 million square miles (9.4 million square kilometers) and spans over 11 countries including Algeria, Chad, Egypt, Libya, Mali, Mauritania, Morocco, Niger, Sudan, Tunisia, and Western Sahara.
The Sahara Desert is also the hottest desert in the world, with temperatures reaching over 130°F (54°C) in some areas. It is home to a diverse range of flora and fauna, including many species that have adapted to the harsh desert environment.
To know more about the Sahara Desert, here
brainly.com/question/3906112
#SPJ4
What is 106 °F in °C?
106 °F is equivalent to 41.11 °C
Temperature conversion from Fahrenheit to Celsius is done using the formula °C = (°F - 32) × 5/9. In this case, we can plug in the given temperature of 106 °F and solve for °C.
Here is the step-by-step process:
1. Subtract 32 from the Fahrenheit temperature: 106 - 32 = 74
2. Multiply the result by 5: 74 × 5 = 370
3. Divide the result by 9: 370 ÷ 9 = 41.11
Therefore, 106 °F is equivalent to 41.11 °C.
To know more about Temperature conversion here:
https://brainly.com/question/19705641#
#SPJ11
a tank filled with manure, water and unused crop plant residues but which minimizes oxygen content could be used to:________
A tank filled with manure, water, and unused crop plant residues, but with minimal oxygen content, can be used for a process known as anaerobic digestion.
Microorganisms, especially methanogenic bacteria, break down the organic matter into simpler compounds such as fatty acids and sugars through a process called hydrolysis.
Now, let's examine the role of oxygen in anaerobic digestion. Therefore, minimizing the oxygen content in the tank is crucial for the success of the anaerobic digestion process.
To ensure that the tank has minimal oxygen content, it is usually sealed to prevent air from entering. Additionally, the contents of the tank are mixed regularly to promote the growth and activity of the methane-producing microorganisms while ensuring that oxygen levels remain low.
A tank filled with manure, water, and unused crop plant residues but with minimal oxygen content can be used for anaerobic digestion, a process that breaks down organic matter into biogas and digestate.
To know more about oxygen here
https://brainly.com/question/13370320
#SPJ4