Martín did the following work and found his surfing increased 50% from the first week to the second.
Percent of change= amount of change/Original amount = 9-6/6 = 3/6 =0.5.
0.5—->50%. Describe Martin’s method for finding percent change in your own words.

Divisions of the rectangle will be equal apart from the color Inga assign.

A rectangle is a two-dimensional shape that has four sides and four right angles. The opposite sides are parallel and equal in length. The area of a rectangle can be calculated by multiplying the length of the rectangle by its width.

Here,
Since the rectangles are identical, they would have the same area and thus, the same divided parts. Therefore, the areas of the colored parts would also be equal.

Thus, divisions of the rectangle will be equal apart from the color Inga assign.

Learn more about rectangles here:
https://brainly.com/question/11841076
#SPJ9

The slope in both equations shows the rate of their savings per week, is Adma saves 3$ per week while Shane saves $4 per week.

The slope of the line is a tangent angle made by line with horizontal. i.e. m =tanx where x in degrees. And also it is defined as the rate of change of a function.

Here,
Adam and Shane are competing to see who can save the most money in one month. From the graph, Adam's linear function of saving is given as by slope-intercept form of equation as,
y = 3x + 3

While the linear function for Shane is not given, so we assume the function as y = 4x.

The slope in both equations shows the rate of their savings per week, is Adma saves 3$ per week while Shane saves $4 per week.

Learn more about slopes here:
https://brainly.com/question/3605446

#SPJ9

Answer: You would round down so 9,372,000

Step-by-step explanation: Since you are rounding to the nearest 1,000 it would be Answer: 9,372,000

Please give me branliest

The ratio of SR and ML and ratio of ST , MN are equal ,so they are similar triangles .

What is triangle ?

Triangle can be defined in which it consists of three sides , three angles and sum of three angles is always 180 degrees.

In given two triangles,

RST and NLM

In the triangle RST ,

The sum of angles is 180

so,

44  + 15 + S = 180

S =   180 - 59

S = 121

And similarly in the triangle NLM,

N + 121 + 44 = 180

N = 180 - 165

N = 15

Therefore, The values of given angles S and N are 121 , 15 respectively

SR / ML  = 3.61 / 5.415 = 0.667
ST / MN = 9.71 / 14.565 = 0.667

Hence, The ratio of SR and ML and ratio of ST , MN are equal ,so they are similar triangles .

To learn more about Triangle from given link.

brainly.com/question/2773823

#SPJ1

Simpson's 1/3rd rule is a method of numerical integration that is used to approximate the value of a definite integral.

It is based on the idea of approximating the area under a curve by dividing it into a series of trapezoids and calculating the area of each trapezoid. The formula for Simpson's 1/3rd rule is:

∫abf(x)dx ≈ (b-a)/6 [f(a) + 4f((a+b)/2) + f(b)]

In this formula, a and b are the limits of integration, and f(x) is the function being integrated. The rule is called the "1/3rd rule" because the coefficient of the middle term is 4/3, which is equal to 1/3 when multiplied by the 3 in the denominator.

To use Simpson's 1/3rd rule, you first need to divide the interval [a,b] into an even number of subintervals. Then, you can apply the formula to each subinterval to get an approximation of the integral over that subinterval. Finally, you can add up the approximations for each subinterval to get an approximation of the integral over the entire interval.

Simpson's 1/3rd rule is a more accurate method of numerical integration than the trapezoidal rule, but it is still an approximation. The accuracy of the approximation depends on the number of subintervals used and the smoothness of the function being integrated.

To know more about trapezoidal rule click on below link:

https://brainly.com/question/14915665#

#SPJ11

The required, Jim can drive the truck for approximately 221.51 miles.

The equation model is defined as the model of the given situation in the form of an equation using variables and constants.

We can use algebra to solve this problem. Let x be the number of miles Jim drove the truck. Then the total cost can be represented as:

15.99 + 0.86x = 206.91

To find the number of miles driven, we can subtract the base fee from both sides of the equation:

15.99 + 0.86x - 15.99 = 206.91 - 15.99

0.86x = 190.92

Finally, we can divide both sides of the equation by 0.86 to find x:

x = 221.51 miles

So, Jim drove the truck for approximately 221.51 miles.

Learn more about models here:
https://brainly.com/question/22591166
#SPJ9

Answer:

5 weeks

Step-by-step explanation:

Let factory B produce the same amount of shoes as factory A in w weeks.

then,

70+50w = 120+40w

50w - 40w = 120 - 70

10w = 50

w = 50/10

w = 5

Therefore, in 5 weeks factory B will produce the same amount of shoes as factory A will produce in 5 weeks time.

Torr and mmHg are two units of pressure that are often used interchangeably. In fact, 1 mmHg is equal to 1 torr, which means that they are equivalent units of measurement.

To convert torr to mmHg, you can simply multiply the pressure value in torr by 1, since 1 torr is equivalent to 1 mmHg. For example, if you have a pressure of 760 torr, you can convert it to mmHg as follows:

760 torr x 1 mmHg/torr = 760 mmHg

Therefore, 760 torr is equivalent to 760 mmHg. Alternatively, you can also convert mmHg to torr by dividing the pressure value in mmHg by 1. For example, if you have a pressure of 760 mmHg, you can convert it to torr as follows:

760 mmHg ÷ 1 mmHg/torr = 760 torr

Therefore, 760 mmHg is equivalent to 760 torr.

Torr and mmHg are two units of pressure that are often used interchangeably. In fact, 1 mmHg is equal to 1 torr, which means that they are equivalent units of measurement.

To learn more about Torr:

https://brainly.com/question/13893899

#SPJ4

The solution of AB = BC  for A, assuming that A,B and C are square matrices and B is invertible is [tex]A = BCB^{-1}[/tex]

We have to solve the equation

AB = BC , given that these all are square matrices and B is invertible.

Write the required Equation:

 AB = BC

Multiply both sides by inverse of B

The multiplicative inverse of a matrix is the matrix that gives you the identity matrix when multiplied by the original matrix.

Matrix multiplied by an identity matrix, the result is always the same original non-identity (non-unit) matrix, and thus, as explained before, the identity matrix gets the nickname of "unit matrix"

[tex]ABB^{-1} = BCB^{-1}\\AI = BCB^{-1}\\A = BCB^{-1}[/tex]

so the solution of AB = BC is [tex]A = BCB^{-1}[/tex]

To know more about matrix

https://brainly.com/question/13260356

#SPJ4

The value of complex number |2 - 3i| will be, 3.605

A complex number is one that has the formula a + bi, where I is the imaginary unit and a and b are real numbers. A and b are the real and imaginary halves of a complex number, respectively.

In order to expand the real number system to include answers to polynomial equations that couldn't be solved with just real numbers, complex numbers were first introduced. Many branches of mathematics and science, such as computer science, physics, and engineering, are based on the idea of a complex number.

The absolute value of a complex number "a + bi" can be calculated as the square root of the sum of the squares of its real and imaginary parts:

|a + bi| = √(a² + b²)

In this case, a = 2 and b = -3, so:

|2 - 3i| = √(2 + (-3)²)

          = √(4 + 9)

          = √(13)

          = approximately 3.6055

So, the value of |2 - 3i| is approximately 3.6055.

To know more about complex number check:

https://brainly.com/question/20566728

#SPJ9

The exponential equation that coordinate points formed is y = -(3)^x

Given the coordinate points (0 -1) and (1 -3), we need to determine the equivalent in the form y=a(b)^x

The equivalent simultaneous equation is:

-1 = ab^0 .......... 1

-3 = ab^1 ............ 2

From equation 1;

-1 = a(1)

a = -1

Substitute a = -1 into equation 2

-3 = (-1)b
b = 3

The required exponential equation is y = -1(3)^x

Learn more on exponential equation here: https://brainly.com/question/12940982

#SPJ1

a. The median of Otter 2 's data is greater than the median of Otter 1's data. b. The variability in the data for Otter 1 is greater than the variability in the data for Otter 2.

c. Liz can conclude that Otter 2 generaily eats more food.

In statistics and probability theory, the median is the value separating the higher half from the lower half of a data sample, a population, or a probability distribution.

The median is the value in the middle of a data set, meaning that 50% of data points have a value smaller or equal to the median and 50% of data points have a value higher or equal to the median.

The median for A is 25.5 and 26 for B. This implies that B has higher median than A.

Learn more about median on

https://brainly.com/question/26177250

#SPJ2

The area of the triangle below is 34 Square per units. The Option A is correct.

The area of a triangle is total region that is enclosed by the three sides of any particular triangle.  It is equal to half of the base multiplied by the height.

The area of a triangle is given as: Area of triangle= 1/2 * Base of triangle * Height of Triangle where the height is 4 and base is 17

The calculation of our area:

= 1/2 * 17 * 4.

= 34²

Read more about area

brainly.com/question/21735282

#SPJ1

Answer:

[tex]Option\ B[/tex]

Step-by-step explanation:

[tex]The\ explicit\ formula\ given:\\f(n)=3n-8\\Since\ n\ can\ be\ any\ positive\ real\ number\,\\The\ formula\ describes\ an\ AP\ whose\ d=3.\\Also,\ Substituting\ n=1:\\f(n)=3*1-8\\f(n)=-5\\Hence, a_1=-5[/tex]

[tex]However,\\We\ also\ know\ that,\\d=a_n-a_{n-1}\\Hence,\\a_n-a_{n-1}=3\\Or,\\a_n=a_{n-1}+3\\These\ conditions\ are\ appropriately\ specified\ on\ Option\ B.[/tex]

To validate a min-heap, you can follow these steps: Start at the root, Check each subtree, Repeat the process recursively, If any node violates the min-heap property, then the heap is not valid.

Start at the root: Verify that the value at the root node is the minimum value in the heap. This is the defining property of a min-heap. Check each subtree: For each subtree, check that the value at the root of the subtree is less than or equal to the values of its child nodes. If this property holds true for all subtrees, the heap is a valid min-heap. Repeat the process recursively: Continue the above steps for each subtree until all nodes have been checked. If any node violates the min-heap property, then the heap is not valid. In that case, you can either rebuild the heap or identify the specific node or subtree that violates the property and fix it. In summary, to validate a min-heap, you need to check that the root node contains the minimum value, and each subtree obeys the min-heap property. You can check the property recursively until all nodes have been verified, and identify any nodes that violate the property for correction.

To learn more about  minimum value click here

brainly.com/question/14316282

#SPJ4

Answer: search it up

Step-by-step explanation:

All 4 helpers will be at the clinic on the same day 7 times in 12 weeks.

What is Prime Factorization?

"Prime Factorization" is the process of determining which prime numbers multiply together to get the original number.

To find the number of times in 12 weeks that all 4 helpers will be at the clinic on the same day, we need to find the least common multiple (LCM) of the numbers 4, 6, 2, and 3.

First, we can find the prime factorization of each number:

4 = 2 x 2

6 = 2 x 3

2 = 2

3 = 3

Next, we can find the LCM by taking the highest power of each prime factor that appears in the factorizations:

LCM = 2 x 2 x 3 = 12

Therefore, all 4 helpers will be at the clinic on the same day every 12 days. Since 12 weeks is equivalent to 84 days, we can divide 84 by 12 to get the number of times:

84 ÷ 12 = 7

So, all 4 helpers will be at the clinic on the same day 7 times in 12 weeks.

To know more about Prime Factorization visit,

https://brainly.com/question/18187355

#SPJ1

Answer: Area of path = 1492 m^2 Area of "no path" = 123508 m^2

Step-by-step explanation:

Probably wrong

Find the difference between the starting and ending values:

    72 - 60 = 12

Divide that difference by the starting value:

    12 ÷ 60 = 0.2

Convert that to a percent:

   0.2 = 20%

The number of teachers increased by 20%.

The key is to divide the difference by the original number, not the ending number.

Answer:

225

Step-by-step explanation:

(x+y)^2, if x=6 and y=9

Put 6 in place of x and 9 in place of y.

(6+9)^2 According to order of operations, add the 6+9 first.

(6+9)^2

= 15^2

= 225

Answer:

If the Esteban's car continues to decrease 20%, by five years the car will be worthless.

20 x 5 is 100. This means that 100%  of the car will have lost its value and will be worthless.

I hope this helps & Good luck <3 !!!

Function transformation rules are a set of rules that can be applied to a basic function in order to transform or modify its graph. These rules include:

1. Vertical translation: adding or subtracting a constant to the function. This shifts the graph up or down without changing its shape.

2. Horizontal translation: replacing x with x + c. This shifts the graph left or right without changing its shape.

3. Vertical scaling: multiplying the function by a constant. This stretches or compresses the graph vertically.

4. Horizontal scaling: replacing x with kx. This stretches or compresses the graph horizontally.

5. Reflection: reflecting the graph across the x-axis or y-axis. This changes the orientation of the graph.

6. Composition: combining two or more functions to create a new function.

These rules allow mathematicians to manipulate and analyze functions in order to better understand their properties and behavior. By applying these rules to a basic function, mathematicians can create a variety of related functions with different features and behaviors.

Learn more about graphs here: brainly.com/question/17267403

#SPJ4

The amount of fuel used per mile (m) = unit rate = 5.2 gallons per mile.

Initial amount (b) = 0 gallon.

A proportional relationship can be represented as an equation of the form y = mx, where x and y are variables and m is the constant of proportionality, also known as the unit rate

Unit rate (m) = amount of fuel used per mile = 156/30 or 312/60 = 5.2 gallons per mile.

Initial amount (b) = starting value or y-intercept = 0 gallon.

Learn more about unit rate of proportional relationship on:

https://brainly.com/question/23073433

#SPJ1

Answer:

              An equation to represent the given geometric sequence would be [tex]a(x)=5*3^{x-1}[/tex], and a(8) of the geometric sequence will be 10,935.

Step-by-step explanation:

              In order to write an equation for a geometric sequence, first we must analyze the sequence to find its starting value and its constant ratio. The starting value is simply the first term in the sequence, which is 5. As for the constant ratio, it is the rate of change that the equation uses. In this sequence, the constant ratio is 3. Now, we can write out an equation for this geometric sequence.

              We know the first term of the sequence is 5, and the common ratio is 3, so we can write out a function for the geometric sequence, which will be [tex]a(n)=5*3^{n-1}[/tex]. NOTE that the exponential power is n - 1, and not n. This is because the first term of the sequence is 5, and not the "0th" term, therefore we must subtract 1 from n (the term number) to have the right sequence.

              Lastly, we can use the equation [tex]a(n)=5*3^{n-1}[/tex] to find the 8th term of the sequence by replacing n with 8. So [tex]a(x)=5*3^{n-1}[/tex] would become [tex]a(8)=5*3^{8-1}[/tex], and you will get [tex]a(8)=5*3^{8-1}[/tex] ⇒ [tex]a(8)=5*3^{7}[/tex] ⇒ [tex]a(8)=5*2187[/tex] ⇒ [tex]a(8)=10,935[/tex]. Therefore, the equation for the nth term of the geometric sequence would be [tex]a(n)=5*3^{n-1}[/tex], and the 8th term of the sequence is 10,935.

Have a great day! Feel free to let me know if you have any more questions :)

Answer:

the graph of g(x) will be the same shape as the graph of f(x), but shifted downward by 3 units.

Step-by-step explanation:

The functions g(x) = 4(0.5)^x - 3 and f(x) = 4(0.5)^x are both exponential functions with the same base of 0.5 and the same coefficient of 4.

However, the graph of g(x) will be shifted downward by 3 units compared to the graph of f(x), because of the constant subtraction of 3 at the end of the function. This shift will occur for all values of x, meaning that the distance between the two graphs will remain constant as x changes.

In other words, the graph of g(x) will be the same shape as the graph of f(x), but shifted downward by 3 units.

Answer:

B. 1/12

Step-by-step explanation:

1/8 × 5/6 = 5/48 × 4/5 = 1/12

The algorithms are a problem solving tool in Python because it  provides a wide range of built-in algorithms that can be used to solve many common problems.

The Algorithms are a fundamental problem solving tool in Python . An algorithm is a set of instructions that are executed in a specific order to solve a particular problem. In Python, algorithms can be implemented in the form of functions or methods.

So , In addition to the built in algorithms, Python also provides a rich collection of third party libraries that contain various algorithms that can be used to solve complex problems.

Learn more about Algorithm here

https://brainly.com/question/27278644

#SPJ4

The given question is incomplete , the complete question is

How are algorithms a problem solving tool in Python ?

Answer:7/12

Step-by-step explanation:

Answer:

7/12

Step-by-step explanation: