Najee has $10.90 in quarters and dimes. He has 10 fewer dimes than quarters. Write an equation using x to represent the number of each coin that Najee has.

Yes, his average speed during this time exceeded the posted speed limit; it was 35 miles per hour.

Take a look at the formula 3x + 5 = 14, where 3x + 5 and 14 are two expressions that are separated by the word "equal." The standard form, the point-slope form, and the slope-intercept form are the three primary kinds of linear equations. Algebra is used in many equations. When it comes to arithmetic, algebra is used when it's difficult to compute an exact amount.

given

His average speed throughout this time was 35 miles per 30 minutes (average speed = 70 / 2 = 35 miles per 30 minutes),

which is over the speed limit because he traveled 36 miles during that time.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

y = 8450(0.7640)ˣ is the equation that will model this situation

The general form of exponential equation is given by:

y = abˣ

Where a is the initial value of the car, b is the depreciation rate and x is the number of years

When x = 0, y = $8450:

y = abˣ

8450 = ab⁰

a = 8450

In 1993, x = 1993 - 1988 = 5 years and y = $2200:

y = abˣ

2200 = 8450b⁵

b⁵ = 2200/8450

b = [tex]\sqrt[5]{}[/tex](2200/8450)

b = 0.7640

Thus, the equation that model the situation is y = 8450(0.7640)ˣ

Learn more about exponential equations on:

https://brainly.com/question/29458893

#SPJ1

Answer: D

Step-by-step explanation:

Answer:

D) 320 pi

Step-by-step explanation:

pi*r^2*h is the equation for the volume of a cylinder.

If you plug in the given values, then you get 320pi.

The answer is D) 320 pi.

Hope this helped! :)

Answer:  42

Step-by-step explanation:

Math

The distance between the 7th seconds and the 10th seconds is  29.4 m.

It is arithmetic.

An arithmetic progression (AP) is a sequence of numbers in which the difference between any two consecutive terms is always the same, called the common difference.

Since the height in the 1st second, 2nd second and 3rd second are 4.9m, 14.7 and 24.5 respectively.

They have a common difference (d) of 9.8. That is:

d = 14.7 - 4.9 = 9.8  

Thus, it is arithmetic

The formula for determining nth of an AP is given by:

nth = a + (n-1)d

where a is the first term, d is the common difference and n is the number of terms

7th seconds:

nth = a + (n-1)d

nth = 4.9 + (7-1)9.8 = 63.7 m

10th seconds:

nth = a + (n-1)d

nth = 4.9 + (10-1)9.8 = 93.1 m

distance between the 7th and the 10th seconds:

10th seconds - 7th seconds = 93.1 - 63.7 = 29.4 m

Learn more about arithmetic progression on:

brainly.com/question/6561461

#SPJ1

The value of x is 6.2 units.

Now by using the Pythagorean theorem

Hypotenuse² =  Perpendicular² + Base²

Now in the Δ ABD

As given DB² = DA² + AB²

As given

DB = 13 units

AB = 9 units

Putting values in the above

13² = 9²+ DA²

169 - 81 = DA²

88 = DA²

DA=√88

In ΔABC

AB² = AC² + CB²

(As given AB = 9 units , CB = x)

9² = AC² + x²

AC ² = 81 - x²

Now in ΔADC.

AD² = AC² + DC ²

As AC ² = 81 - x²

DC = 13 - x

AD=√88

(√88)²=81-x²+(13-x)²

(By using the formula (a + b)² = a² + b² + 2ab )

88=81-x²+13²-2*13*x+x²

88=81-x²+13²-26x+x²

88-81 - 169 = -26x

88-250 =-26x

-162 = - 26x

x=162/26

x = 6.2 (Approx)

Therefore the value of x is 6.2 units.

To know more about the Pythagorean theorem:

https://brainly.com/question/11908357

#SPJ4

The value of x is 0.01

Angles can be measured using one of two standard units. Degrees are the most widely used unit of measurement. A straight angle is 90° since a circle has 360 equal degrees. We'll just take into account angles between 0° and 360° for the time being; however, we'll take into account angles higher than 360° and negative angles later, in the section on trigonometric functions.

Minutes and seconds can be used to further split degrees, but this separation is less common than it once was. Minutes are the 60 equal pieces that make up each degree. Thus, seven and a half degrees can also be written as seven degrees and thirty minutes, or seven°30'. Additionally, each minute is divided into 60 equal seconds.

To be learn more about seconds refer to:

https://brainly.com/question/20546273?referrer=searchResults

#SPJ1

Answer:

Step-by-step explanation:

f(-3x) = -3f(x)

f(3x) = 3f(x)

This is assuming that f is an existing function and it follows this rule for any input. If not, it will not necessarily be true for all inputs.

Answer:

[tex] \sf \: {( - 6)}^{3} = - 216[/tex]

Step-by-step explanation:

Given problem,

→ (-6)⁸/(-6)⁵

Let's evaluate the problem,

→ (-6)⁸/(-6)⁵

→ 1679616/-7776

→ (1679616) ÷ (-7776)

→ -216

→ (-6)³

Hence, the answer is (-6)³.

Dilation is a process of changing the size of an object or shape by decreasing or increasing its dimensions by some scaling factors.

To learn more about Dilation refers to:

brainly.com/question/3457976

#SPJ4

Dilation is the practice of altering an object's or shape's size by either enlarging or decreasing its dimensions by a certain amount.

A transform called dilation is used to alter an object's size. Dilation is a technique for enlarging or contracting objects.

The result of this transformation is an image that has the same shape as the original. A stretched figure can be enlarged by using given formula:

Scale is equal to the difference between the original and new shapes' sizes.

Stretch transformations (similarity transformations) enlarge or shrink shapes. You require a scale factor of k and a central point. Depending on the value of k, the expansion either grows or shrinks. Elongation is elongation for |k| > 1. If 1 is stretched, for |k|.

To learn more about Dilation refers to:

brainly.com/question/3457976

#SPJ4

The answer is 9x+8=4

The solution of a linear equation is defined as the points, in which the lines represent the intersection of two linear equations. In other words, the solution set of the system of linear equations is the set of all possible values to the variables that satisfies the given linear equation.

Given here: Nine times the sum of a number and 8 is equal to 4

let the number be x then we have as per question

9x+8=4

x=-4/9

Hence, The required equation is 9x+8=4

Learn more about linear equations here:

https://brainly.com/question/545403

#SPJ1

Answer:

9 yards is a better estimate.

Step-by-step explanation:

This is because it is closer to the actual answer. 9 yards is only 1 foot off while the other is 2.

The the tension in the string is 276 N. Thus, the correct answer is B.

The tension in the string provides the centripetal force needed to keep the ball moving in a circular motion. As the tension in the string increases, the centripetal force increases as well, and the ball will move in a smaller circle (the radius will decrease). Therefore, if the tension increases, the radius decreases and the velocity increases, and if the tension decreases, the radius increases and the velocity decreases.

To determine the tension in the string, we can use the equation:

Where m is the mass of the ball, v is the velocity of the ball, and r is the radius of the circle.

In this problem:

So, tension:

The tension in the string is 276 N. Hence, the correct answer is B.

Learn more about tension in the string here: brainly.com/question/2976510

#SPJ4

Round to the nearest tenth , if necessary the value of x is 6.3.

What is right triangle ?

A right triangle is a type of triangle in which one angle is equal to 90 degrees. The side opposite this 90-degree angle is known as the hypotenuse, and the other two sides are known as the legs. The Pythagorean theorem, which states that the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the legs, applies to all right triangles.

To find the value of x ,

⇒ [tex]\frac{10}{x}=\frac{x}{4}[/tex]

⇒ [tex]x^{2} = 40[/tex]

⇒ x = 6.3

Hence , Round to the nearest tenth , if necessary the value of x is 6.3.

To learn more about right triangle visit : brainly.com/question/29285631

#SPJ4

None of the functions listed have a great rate of change.

Rate of change is a major of house quickly one quantity change in relation to another it is parisu of the changing 122 the changing another quantity over specified time period it is commonly used mathematics physics economic and other discipline to make operate of vijay process is a caring rate of changing also known as velocity, derivative or slope.

Function (a) is a linear equation, and its rate of change is constant. Function (b) is a linear equation, and its rate of change is also constant. Function (c) is a set of coordinates, so it does not have a rate of change.

To know more about rate of change click-
https://brainly.com/question/25184007
#SPJ1

The volume of a box shape of a right rectangular prism with height 10 inches, length 7 inches, and width 4 inches would be 280 cubic inches.

Volume can be defined as the amount of space occupied by any three-dimensional solid. These solids can be anything from a cube to a cuboid, a cone, a cylinder or a sphere.

It is also the measure of the capacity that an object holds.

Volume = h x l x w

where

h = 10 inches

l = 7 inches

w = 4 inches

Volume = 10 x 7 x 4

Volume = 280 cubic meters

Learn more about volume here: https://brainly.com/question/463363

#SPJ1

Answer:

3 inches

Step-by-step explanation:

The perimeter is the sum of all the sides of a shape. A rectangle has 4 sides.

2 * 2 = 4

One side is 2 in., so the parallel side is also 2 in.

10 - 4 = 6

Subtract the sum from the perimeter.

6 / 2 = 3

Since there are two sides left, divide by 2.

The required point is 0.25 miles away from the nearest point on the shore.

The differentiation of a function is defined as rate of change of its value at a point. It can be written as f'(x) =  lim h--> 0 (f(x + h) - f(x)) /(x + h - x).

here, we have,

It can be applied to minimize or maximize a function.

The given problem can be shown in the form of a diagram as follows

Suppose the underwater cable meet the shore at a distance x from the nearest point.

Then, the distance of cable in water is x² + 3.5² = x² + 12.25

And, the distance of cable in the ground is 10 - x.

As per the question, the cost of the laying cable can be represented as follows,

C(x) = 1200(10 - x) + 2400(x² + 12.25)

In order to minimize the cost the above function can be differentiated and equated to zero as,

C'(x) = -1200 + 4800x = 0

=> x = 1200/4800

      = 1/4

      = 0.25

Hence, in order to minimize the cost of the entire project the underwater cable should meet the shore at 0.25 miles away from the nearest point.

To know more about differentiation click on,

brainly.com/question/24898810

#SPJ5

Answer: The answers are A and B because when you divide all the numbers you get 6. It is not C and D because when you get different quotients.

Step-by-step explanation:
A. 6/1=6

12/2=6

18/3=6

24/6=6

36/6=6
———————————————————————————————————————
B.14/-4=-3.5

7/-2=-3.5

-14/4=-3.5

-21/6=-3.5

Therefore , the solution to the given problem of surface area is the sector's area is 12 square centimeters.

Surface is a unit used to describe how much overall space a object's surface occupies. A three-dimensional shape's surface area is equal to the sum of its surroundings. The overall surface region of a tri shape is referred to as surface area. The surface area of a cube with six square faces can be calculated by adding up each face's specific area. As an alternative, you can identify the box's measurements using the formula below: Surface (SA) is equal to two times two times two. The total amount of space that a three-dimensional shape takes up is used to determine its surface area.

Here,

The parameters in this case are:

Radius, r = 12 Angle, x = /6

The sector's geographic area is

A = (1/2) × r^2x

We thus have:

A = (1/2) × 12^2 * π/6

Evaluate

A = 12π

Therefore , the solution to the given problem of surface area is the sector's area is 12 square centimeters.

To know more about surface area visit:

https://brainly.com/question/2835293

#SPJ1

Consequently, the sector's area is 12 square centimeters in which the parameters are Radius, r = 12 Angle, x =π /6 .

A circle is created when every place in the line that is a specific distance apart from another point does so (center). As a result, it is a curve made up of points that are spaced apart from one another in the plane. It is rotationally symmetric the about center at all angles. Every pair of endpoints in the plane that make up a circle are uniformly distributed out from the "center" and form a closed, two-dimensional object. A specular symmetries line is produced by a line that passes through the circle. It is rotationally equal about the center at all angles.

given

The parameters are as follows:

Radius, r = 12 Angle, x =π /6

The sector's geographic area is

A = (1/2) × r^2x

We thus have:

A = (1/2) × 12^2 * π/6

Evaluate

A = 12π

Consequently, the sector's area is 12 square centimeters in which the parameters are Radius, r = 12 Angle, x =π /6 .

To know more about circle visit:

https://brainly.com/question/29142813

#SPJ1

A triangle is a polygon with three sides and three vertices. The triangle's interior angle, which is 180 degrees, is formed.

Three sides and three vertices make up a triangle, which is a polygon. There is a 180 degree angle created inside the triangle. In other words, a triangle's internal angles add up to 180 degrees.

A closed triangle has 3 sides, 3 angles, and 3 vertices. It is a 2-dimensional shape. Polygons include triangles as well. ABC is a triangle that is depicted in the previous illustration.

An "opposite" side in a right triangle is the one that is across from a specific angle, while a "adjacent" side is the one that is next to a specific angle. The hypotenuse is the longest side in a right triangle.

Therefore, the answer is:

Side LN = 4.33013 = 5√3/2

Side MN = 5

Side c = 2.5

To learn more about triangle refer to:

https://brainly.com/question/1058720

#SPJ1

The quadrilateral MNPQ is trapezoid but not an isosceles trapezoid .

A trapezoid, as well known as a trapezium, is a closed, flat shape with four straight sides and one pair of parallel sides.

Here given points,

M(-2,0), N(0,4), P(5,4), and Q(8,0) are given.

We are familiar with the slope formula,

Slope = y2 - y1 / x2 - x1

So here,

Slope of MN = 4 - 0 / 0 - (-2)

                     = 4/2

                     = 2

Slope of NP = 4 - 4 / 5 - 0

                     = 0/5        

                     = 0

Slope of PQ = 0 - 4 / 8 - 5

                     = -4/3

Slope of QM = 0 - 0 / -2 -(-8)

                     = 0/10

                     = 0

Therefore we can see, NP||QM and MN∦PQ.

Therefore MNPQ is a trapezoid because it has two parallel sides.

By using distance formula,

MN = [tex]\sqrt{0-(-2)^{2} +(4-0)^{2} }[/tex]

      = √20

      = 2√5 units

PQ = [tex]\sqrt{(8-5)^{2} +(0-4)^{2} }[/tex]

      = √25

      = 5 units

Here MN ≠ PQ , MN and PQ are not congruent to each other.

Therefore MNPQ not is a isosceles trapezoid.

To learn more about trapezoid refer to :

https://brainly.com/question/1463152

#SPJ1

The scale factor of Reggie's drawing is 1/500.

The scale factor of a drawing is the ratio of the size of the drawing to the size of the real object.

To find the scale factor of Reggie's drawing, we can use the information given: in real life, the garage is 3 meters wide, and in the drawing, it is 6 millimetres wide.

We know that:

Scale factor = size of drawing/size of the real object

We can use this equation to find the scale factor of Reggie's drawing:

Scale factor = 6 millimetres / 3 meters

To make the units consistent, we need to convert 3 meters to millimetres.

1 meter = 1000 millimeters

So, 3 meters = 3 * 1000 millimeters = 3000 millimeters

Now we can substitute this value into the scale factor equation:

Scale factor = 6 millimetres / 3000 millimetres

Simplifying the fraction: Scale factor = 1/500

Therefore, the scale factor of Reggie's drawing is 1/500. This means that every 1 millimetre on the drawing represents 500 millimetres (or 0.5 meters) in real life.

To learn more about equations,

Visit; brainly.com/question/29657983

#SPJ4

Answer: $87.99

Step-by-step explanation: ($125.70) x (1 - 0.30)
= $87.99

Answer: $87.99

Step-by-step explanation:

Use Is/Of=%/100

Step 1: Plug in Points

Aardvark=$125.70 is on sale for 30% off

is/125.70=30/100 ---> 125.70(30)/100=$37.71

Step 2: Subtract Discount to Original Price

125.70-37.71=$87.99

So on solving the provided question we can say that -  all angles of triangle - 180; x = 60

A triangle is a polygon since it has three sides and three vertices. It is one of the basic geometric shapes. The name given to a triangle containing the vertices A, B, and C is Triangle ABC. A unique plane and triangle in Euclidean geometry are discovered when the three points are not collinear. Three sides and three corners define a triangle as a polygon. The triangle's corners are defined as the locations where the three sides converge. 180 degrees is the result of multiplying three triangle angles.

all angles of 180

x +90+30 = 180

x = 60

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ4

The solution of system of equations are (4, 2). Therefore, option A is the correct answer.

The general equation of a straight line is y=mx+c, where m is the gradient, and y = c is the value where the line cuts the y-axis. This number c is called the intercept on the y-axis.

The given equation is y=-x+6 ---------(I)

On a coordinate plane, a line goes through (0, 0) and (4, 2).

Here, slope m=(2-0)/(4-0)

= 1/2

Substitute m=1/2 and (4, 2) in y=mx+c, we get

2=1/2 (4)+c

c=0

y=1/2 x ---------(II)

Substitute equation (II) in equation (I), we get

1/2 x=-x+6

x=-2x+12

x+2x=12

3x=12

x=4

Substitute x=4 in equation (II), we get

y=2

Then, solution of system of equations is (4, 2)

Therefore, option A is the correct answer.

To learn more about the the equation of a line visit:

https://brainly.com/question/2564656.

#SPJ1

Answer:

AI's Auto Shop: y = 149 + 53x

Edna's Engine Repair: y = 280

Explanation:

The system of equations represent the costs of the two different repair shops. The first equation, y = 149 + 53x, represents the total cost of AI's Auto Shop. The variable x represents the number of hours of labor required, and the variable y represents the total cost. The second equation, y = 280, represents the flat fee charged by Edna's Engine Repair.

The graph of the system of equations would show two lines, one for each equation. The line for AI's Auto Shop would have a slope of 53 and a y-intercept of 149, representing the cost of parts and hourly labor. The line for Edna's Engine Repair would be a horizontal line at y = 280, representing the flat fee charged.

When the job takes 2 hours, AI's Auto Shop would charge $149 + $53*2 = $255 and Edna's Engine Repair would charge $280. So, AI's Auto Shop would be cheaper.

For a job that takes 3 hours, AI's Auto Shop would charge $149 + $53*3 = $308 and Edna's Engine Repair would charge $280. So, AI's Auto Shop would be more expensive.

Answer:

Step-by-step explanation:

Since adding a negative to a positive is inverse subtracting, use this as an advantage and act as if you're subtracting to get the result, or output value, -9.

Hope this helps! :)

Answer:

[tex] \sf \: x = - 11[/tex]

Step-by-step explanation:

Now we have to,

→ find the required value of x.

The equation is,

→ 2 + x = -9

Then the value of x will be,

→ 2 + x = -9

→ x + 2 = -9

→ x = -9 - 2

→ [ x = -11 ]

Hence, the value of x is -11.

Answer:

use c and d

Step-by-step explanation:

Answer:

Step-by-step explanation:

Answer:

Step-by-step explanation:

1.2=6

6=40