Newton's ring is a phenomenon of interference pattern of the light rays which is created by reflection of light rays.
What is Newton's ring experiment?Newton's rings is a phenomenon in which an interference pattern of the light is generally created by the reflection of light rays between the two surfaces, typically a spherical surface and an adjacent touching flat surface in space.
Newton's rings, in optics, is a series of concentric light- and dark-colored bands which are observed between any two pieces of glass when one is convex and it rests on its convex side on another piece which is having a flat surface. Thus, a layer of air exists between the two.
Newtons ring experiment is used for the determination of wavelength of monochromatic lights. It is also used for the determination of refractive index of transparent liquid.
Learn more about Newton's ring experiment here:
https://brainly.com/question/16979383
#SPJ9
An automobile enters an a turn whose radius is R. The road is banked at angle θ. Friction is negligible between wheels of the automobile and road. Mass of the automobile is m and speed is v. Select the correct alternative. A. Net force on the automobile is zeroB. Normal reaction the automobile is mg cosθC. Normal reaction the automobile is mg secθD. Net force on the automobile is (mg)^2+(mv^2/R)2
Option B is the correct alternative, and the normal reaction on the automobile is mg cosθ if friction is negligible.
The correct alternative is option B: the normal reaction on the automobile is mg cosθ.
When an automobile enters a turn, it experiences a centripetal force that is directed towards the center of the turn. This force is provided by the component of the normal force that is perpendicular to the surface of the road. If the road is banked at an angle θ, the normal force has two components: one perpendicular to the road and one parallel to the road.
To maintain circular motion, the net force on the automobile must be directed towards the center of the turn. In the absence of friction, the only forces acting on the automobile are its weight and the normal force. Since the weight is always directed downwards, the normal force must provide the necessary centripetal force.
Normal force:
N = mg cosθ
where m is the mass of the automobile, g is the acceleration due to gravity, and θ is the angle of inclination of the road. This expression shows that the normal force is proportional to the weight of the automobile, and is reduced by a factor of cosθ due to the inclination of the road.
Learn more about friction here:
https://brainly.com/question/28941436
#SPJ4
What is the missing part (yellow box) in each of these nuclear equations? Hint: Use the Periodic Table. The
answer will be a number or the symbol of an element. (6 pts)
A.
B.
C.
D.
40K →
19
e +
234
238 U → He +90
92
40
20
237 U₁e +3Np
92
93
4
230Th →→He+ Ra
90
88
35
35Sie + ³5 p
Answer:
Answer:
Answer:
Answer:
Answer:
Calcium is released from the breakdown of potassium ion. Thorium atom is released from the degradation of Uranium atom through alpha decay. The beta decay of Uranium form Neptunium. Radium is released from the alpha decay of thorium and P(15) is released from the beta decay of Silicon atom.
What are alpha and beta decay?Alpha decay is a common mode of radioactive decay in which a radioactive nucleus emits an alpha particle such as a helium-4 nucleus.
Beta decay is a common mode of radioactive decay in which the nucleus emits beta particles. The daughter nucleus in this decay will have a higher atomic number than the original nucleus.
Calcium is released from the breakdown of potassium ion. Thorium atom is released from the degradation of Uranium atom through alpha decay. The beta decay of Uranium form Neptunium. Radium is released from the alpha decay of thorium and Phosphorus(15) is released from the beta decay of Silicon atom.
Learn more about Atoms here:
https://brainly.com/question/13654549
#SPJ1
car bumpers are designed to limit the extent of damage to the car in the case of low-velocity collisions. consider a 3600 lb passenger car impacting a concrete barrier while traveling at a speed of 4.0 mph. model the car as a particle, and consider two types of bumpers: (1) a simple linear spring with constant k and (2) a linear spring of constant k in parallel with a shock-absorbing unit generating a nearly constant force of 700 lb over 0.25 ft.
k = _____ x 10^4 lb/ft
k = 2.8 x 104 lb/ft. is a constant-length linear spring that is parallel to a 700 lb over force-generating shock absorber.
A velocities simple definition is what?The main determinant of an object's position and rate of motion is its velocity. It can be explained as the distance an object travels in one unit of time. The dispersion of the objects in a given amount of time is referred to as velocity. Vector sum (v) squared is equal to the sum of the beginning velocity (u) squared and the acceleration (a) times the displacement times two (s). In order to find v, we solve for v such that final velocity (v) = numerator of speed (u) divided plus two times accelerated (a) twice displacement (s).
To calculate kinetic energy of the car KE = (1/2)mv^2
to convert the mass of the car he velocity from mph to ft/s (1 mph = 1.47 ft/s), we get :KE = (1/2)(3600/32.2)(4.0 x 1.47)^2
KE = 13325 ft-lb, the potential energy will be calculated as PE = (1/2)kx^2
since the displacement of the spring is unknown, we can express it in terms of k and solve for k using the given information
we know that constant force of 700 lb is generated over a displacement of 0.25 ft.W = Fd
W = 700 lb x 0.25 ft
W = 175 ft-lb
e can equate the two expressions for potential energy and solve for k:
(1/2)kx^2 = 175
For the bumper with the shock-absorbing unit, the displacement x is 0.25 ft, so we get:
1/2)k(0.25)^2 = 175
k = 280000 Ib/ft
Therefore, the value of k for the simple linear spring is k = 2.8 x 10^4 lb/ft.
To know more about acceleration visits:
https://brainly.com/question/29766852
#SPJ1
the coriolis force on earth is caused by _____ . weights of objects on earth earth's revolution around the sun earth's rotation rotation of objects in the atmosphere rotation in the northern hemisphere question content areato an observer on a platform spinning counterclockwise, an object will ______ when thrown. appear to move to the left appear to move to the right appear to travel in a straight line move to the right move to the left
The earth's rotation generates the coriolis force, which makes objects hurled farther have more buoyant force.
What causes the Coriolis force?The velocity Centripetal force is an outward force brought on by the rotation of the earth. In the northern hemisphere, the Coriolis force causes winds to be deflected to the right, and in the southern hemisphere, to the left. It is often referred to as "Ferrel's Law." When the wind speed is high, the deflection is greater.
why is the Coriolis force is absent ?The Coriolis force is most noticeable in the longitudinal course of an object. On Earth, an object traveling in a north-south direction will appear to be deflected to the north of the Equator and to left with in Southern Hemisphere.
To know more about velocity visit :
https://brainly.com/question/18084516
#SPJ4
A particle starts from the origin at t = 0 with an initial velocity of 5.0 m/s along the positive x axis. If the acceleration is (-2.5 î + 4.9 įm/s2, determine (a)the velocity and (b)position of the particle at the moment it reaches its maximum x coordinate.
The velocity of the particle at the moment it reaches its maximum x coordinate is (1.9 î + 7.4 į)m/s and the position of the particle at the moment it reaches its maximum x coordinate is approximately 2.6 î + 2.8 į m from the origin.
(a) To find the velocity of the particle at the moment it reaches its maximum x coordinate, we need to find the time at which the particle reaches this point. We can use the kinematic equation:
x = x0 + v0t + 0.5at^2
where x0 = 0, v0 = 5.0 m/s along the positive x axis, a = (-2.5 î + 4.9 įm/s2), and x is the maximum x coordinate. We can solve for t by setting the velocity to zero:
v = v0 + at = 0
t = -v0/a = -5.0/(-2.5 î + 4.9 į) ≈ 0.75 s
Now, we can use the kinematic equation for velocity:
v = v0 + at
v = 5.0 + (-2.5 î + 4.9 į)m/s2 × 0.75 s = (1.9 î + 7.4 į)m/s
Therefore, the velocity of the particle at the moment it reaches its maximum x coordinate is (1.9 î + 7.4 į)m/s.
(b) To find the position of the particle at this moment, we can use the same kinematic equation for the position:
x = x0 + v0t + 0.5at^2
x = 0 + 5.0 m/s along the positive x axis × 0.75 s + 0.5(-2.5 î + 4.9 įm/s2) × (0.75 s)^2
x ≈ 2.6 î + 2.8 į m
Therefore, the position of the particle at the moment it reaches its maximum x coordinate is approximately 2.6 î + 2.8 į m from the origin.
For more questions like Velocity click the link below:
https://brainly.com/question/12975674
#SPJ4
A computer hard disk 8.0 cm in diameter is initially at rest. A small dot is painted on the edge of the disk. The disk accelerates at 600 rad/s2 for 1/2 s, then coasts at a steady angular velocity for another 1/2 s.
What is the speed of the dot at t = 1.0 s?
Through how many revolutions has the disk turned?
One revolution is equal to 360 degrees, so the disk has completed 1/4 of a revolution or 0.25 revolutions.
We can use the fact that the angle rotated during the entire 1.0 s period is 90 degrees to calculate the number of revolutions completed. Disk accelerates at a rate of:
[tex]600 rad/s^2 for 1/2 s[/tex]
ω = ω0 + αt,(ω is the final angular velocity, ω0 is initial angular velocity, α is angular acceleration, t is the time). The angular velocity remains constant at 300 rad/s. Using the equation
θ = ω0t + 1/2 αt^2,
Now, v = rω, ( v is linear speed of dot, r is radius of disk (which is half its diameter, or 4.0 cm), and ω is the angular velocity.
[tex]t = 1.0 s = 120 cm/s.[/tex]
To know more about angular velocity, here
https://brainly.com/question/30733452
#SPJ4
The mass is 18 kg. The velocity is 4.7 m/s. What is the kinetic energy?
Answer: the mass is18 kg
Explanation:
Answer:
Explanation:
Kinetic energy=1/2 *m *v^2
=1/2 * 18* 4.7*4.7=198.81J
A spring has a force constant of 440.0 N/m.
(a) Determine the potential energy stored in the spring when the spring is stretched 4.15 cm from equilibrium.
(b) Determine the potential energy stored in the spring when the spring is stretched 2.96 cm from equilibrium.
(c) Determine the potential energy stored in the spring when the spring is unstretched.
Following are the answer:
The potential energy stored in the spring when it is stretched 4.15 cm from equilibrium is 0.0424 J.The potential energy stored in the spring when it is stretched 2.96 cm from equilibrium is 0.0207 J.The potential energy stored in the spring is zero.What is potential energy?Potential energy is the energy possessed by an object due to its position or configuration relative to other objects. It is the energy that an object has stored in it as a result of its position or state. An object's potential energy is often associated with its ability to do work, which can be released when the object is allowed to move or change its position.
(a) The potential energy stored in a spring stretched by a distance x from its equilibrium position can be calculated using the formula:
[tex]U = (1/2) k x^2[/tex]
where k is the spring constant.
Substituting the given values, we get:
[tex]U = (1/2) (440.0 N/m) (0.0415 m)^2U = 0.0424 J[/tex]
Therefore, the potential energy stored in the spring when it is stretched 4.15 cm from equilibrium is 0.0424 J.
(b) Using the same formula as in part (a), but with x = 0.0296 m, we get:
[tex]U = (1/2) (440.0 N/m) (0.0296 m)^2U = 0.0207 J[/tex]
Therefore, the potential energy stored in the spring when it is stretched 2.96 cm from equilibrium is 0.0207 J.
(c) When the spring is unstretched, its potential energy is zero, since there is no displacement from equilibrium. So the potential energy stored in the spring is zero.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ9
One principle of this course states, "Communication cannot be reversed." Explain this statement in your own words AND provide at least one personal example when you wished you could "un-send" a message.
Communication cannot be undone once it has been sent, hence it is impossible to undo any effects it may have had on the recipient.
Is it possible to reverse communication?Interpersonal communication is an irreversible process; you can later apologize for something you said and wish you hadn't said it, but you can't take it back. We frequently act and speak with people depending on prior communication experiences.
Reverse example: What is it?In passive sentences, the typical word order is reversible. The two stamps were turned on their sides by him. A second vehicle backed out of the drive. He drove away after doing a U-turn. Driving backwards directly at the officer of the law, he.
To know more about communication visit:-
https://brainly.com/question/13008699
#SPJ1
A fully charged parallel-plate capacitor remains connected to a battery while a dielectric is slid between the plates. Do the following quantities increase, decrease, or stay the same?
(a) C
---Select--- increases decreases stays the same
(b) Q
---Select--- increases decreases stays the same
(c) E between the plates
---Select--- increases decreases stays the same
(d) ?V
---Select--- increases decreases stays the same
(e) energy stored in the capacitor
---Select--- increases decreases stays the sam
When a dielectric material is inserted between the plates of a parallel-plate capacitor while it remains connected to a battery, the following quantities change:
What happens when a dielectric material is inserted?(a) C: becomes bigger
C = A/d, where is the permittivity of the medium between the plates, A is the area of the plates, and d is the distance between the plates, gives the capacitance of the capacitor. A dielectric material placed between the plates raises the medium's permittivity, which in turn raises the capacitor's capacitance. As a result, the capacitance rises.
A: remains the same (b)
Because the battery maintains a constant potential difference between the plates and the charge on the plates is equal and opposite, the charge on the capacitor stays constant. The charges on the plates are redistributed when the dielectric material is added, but the overall charge on the plates does not change.
(c) E between the plates: decreases
The electric field between the plates is given by E = V/d, where V is the potential difference between the plates. When a dielectric material is inserted between the plates, it reduces the electric field between the plates, as the voltage across the plates remains constant while the distance between them increases. Therefore, the electric field between the plates decreases.
(d) ΔV: decreases
The potential difference between the plates decreases when a dielectric material is inserted between them. This can be explained by the relationship V = Q/C, where V is the potential difference, Q is the charge on the plates, and C is the capacitance. Since the capacitance increases when the dielectric is inserted, the potential difference decreases for the same charge on the plates. Therefore, ΔV decreases.
(e) Energy stored in the capacitor: increases
The energy stored in a capacitor is given by U = (1/2)CV², where C is the capacitance and V is the potential difference between the plates. When a dielectric material is inserted between the plates, the capacitance increases and the potential difference decreases. Since the energy stored is proportional to the square of the potential difference, the decrease in ΔV is more than compensated by the increase in capacitance, leading to an overall increase in the energy stored in the capacitor. Therefore, the energy stored in the capacitor increases.
To know more about dielectric material , check out :
https://brainly.com/question/17090590
#SPJ4
if the equilibrant vector is calculated and placed correctly on the force table, we expect the ring to
If the equilibrant vector is calculated and placed correctly on the force table, we expect the ring to "remain stationary or in a state of equilibrium".
In a force table experiment, the goal is to determine the vector sum of two or more forces acting on an object. The equilibrant is the vector that has the same magnitude as the vector sum of the given forces but is opposite in direction. When the equilibrant is added to the forces, the resulting vector sum will be zero, indicating that the forces are in balance and the object is in equilibrium.
If the equilibrant vector is calculated correctly and placed on the force table, it will cancel out the given forces, and the net force acting on the ring will be zero. Therefore, the ring will not experience any acceleration and will remain stationary.
In summary, if the equilibrant vector is calculated and placed correctly on the force table, we expect the ring to be in a state of equilibrium and remain stationary.
You can learn more about equilibrant vector at
https://brainly.com/question/24042341
#SPJ4
given the density of water is roughly 1mg/1l how could you verify whether you accurately pipette 950l of water into each tube
To verify whether you accurately pipette 950l of water into each tube, measure the actual weight of water and compare it with calculated weight.
To verify if you accurately pipetted 950 mL of water into each tube, you can weigh each tube before and after adding the water. Since you know the density of water, you can calculate the expected weight of the water in each tube, which should be equal to 950 g or 0.95 kg.
By subtracting the weight of an empty tube from the weight of a tube filled with water, you can determine the actual weight of the water added to the tube. If the actual weight is close to 0.95 kg, then the pipetting was accurate.
To know more about the pipette, here
brainly.com/question/28839494
#SPJ4
consider a wet banked racetrack, where there is a coefficient of static friction of 0.34 and a coefficient of kinetic friction of 0.29 between the tires and the surface of the racetrack. the radius of the curve is 56.0m .
The maximum speed at that a car can travel around the curve without slipping is 13.7 m/s.
In this situation, the coefficient of static friction (μs) is 0.34 and the coefficient of kinetic friction (μk) is 0.29. The radius of the curve (r) is 56.0m.
We can use these values to calculate the maximum speed that a car can travel around the curve without slipping. This is determined by the centripetal force (Fc) required to keep the car on the curve and the frictional force (Ff) that keeps the car from sliding off the curve.
The equation for centripetal force is
Fc = mv^2/r,
where m is the mass of the car and v is the speed of the car.
The equation for frictional force is
Ff = μsFn,
where Fn is the normal force.
Since the car is on a level surface,
Fn = mg,
where g is the acceleration due to gravity.
Setting Fc equal to Ff and solving for v gives us the maximum speed that the car can travel around the curve without slipping:
mv^2/r = μsmg v^2
=> μsrg v
=> √(μsrg) v
=> √(0.34 * 56.0m * 9.8m/s^2) v
=> 13.7 m/s
To learn more about Maximum speed :
https://brainly.com/question/30193604
#SPJ11
Time value of money calculations can be solved using a mathematical equation, a financial calculator, or a spreadsheet. Which of the following equations can be used to solve for the present value of an ordinary annuity?
PMT x {1 - [1 / (1+r)n1+rn]} / r
The term "ordinary annuity" refers to the assumption made by the equation that payments are paid at the conclusion of each month.
The present value of an ordinary annuity may be calculated using the equation you've given.
PMT x 1 - [1 / (1+r)]n]r
In this case, PMT stands for the regular payment made at the end of each period, r for the interest rate per period, and n for the overall number of periods.
The present value of the annuity, which is the total present value of all the future payments, is determined by the numerator of the equation.
To account for the time value of money, the denominator of the equation determines the present value of one dollar.
The term "ordinary annuity" refers to the assumption made by the equation that payments will be made at the conclusion of each period.
The equation would have to be modified if the payments were made at the start of each period.
For such more questions on Ordinary Annuity
https://brainly.com/question/25792915
#SPJ4
an olympic-class sprinter starts a race with an acceleration of 3.88 m/s2 what is their speed 3.23 s later?
The speed of the Olympic-class sprinter 3.23 seconds later is 12.54 m/s.
The speed of the Olympic-class sprinter 3.23 seconds later can be found using the equation for speed, which is:
speed = acceleration × time.
In this case, the acceleration is 3.88 m/s² and the time is 3.23 seconds.
Speed refers to the rate at which an object covers a certain distance over time. It is typically measured in units of distance per unit of time, such as meters per second (m/s) or kilometers per hour (km/h).
The formula for speed is:
So, the equation would be:
speed = 3.88 m/s² × 3.23 s
By multiplying these two values, we can find the speed of the sprinter 3.23 seconds later:
speed = 12.54 m/s
To learn more about Speed :
https://brainly.com/question/13943409
#SPJ11
A 2.1 kg block of wood sits on a frictionless table. A 3.0 g bullet, fired horizontally at a speed of 540 m/s , goes completely through the block, emerging at a speed of 240 m/s .
What is the speed of the block immediately after the bullet exits?
After the bullet escapes, the block moves at a speed of 59.4 m/s.
The conservation of momentum can be used to resolve this issue. Since there is no outside force operating on the bullet or the block prior to impact, the system's overall momentum is zero. Following the bullet's passage through the block, the bullet and block will move at different speeds, but the system's overall momentum will still be conserved.
Allow v to represent the block's velocity after the bullet leaves. The initial momentum of the system is 0 since the block is initially at rest.
(m block*v block) + (m bullet*v bullet)
where m bullet is the bullet's mass, v bullet is its exit-block velocity, and m block is the block's mass.
The initial energy of the system is:
(1/2) * m_bullet * v_bullet^2
The final energy of the system is:
(1/2) * m_bullet * v_bullet^2 + (1/2) * m_block * v^2
Since the energy is conserved, we can set the two expressions equal to each other and solve for v:
(1/2) * m_bullet * v_bullet^2 = (1/2) * m_bullet * v_bullet^2 + (1/2) * m_block * v^2
v^2 = (m_bullet / m_block) * (v_bullet^2 - v^2)
Plugging in the given values:
v_bullet = 240 m/s
m_bullet = 3.0 g = 0.003 kg
m_block = 2.1 kg
v^2 = (0.003 / 2.1) * (540^2 - 240^2)
v^2 = 3534
v = 59.4 m/s
Therefore, the speed of the block immediately after the bullet exits is 59.4 m/s.
Learn more about momentum here:
https://brainly.com/question/30677308
#SPJ4
Replace the incandescent bulb with the Voltage meter and return loop # to 3. What happens when you move the bar magnet back-n-forth through the loop? Does this appear to be creating a Direct Current or an Alternating Current? How do you know?
If we replace the incandescent bulb with a voltage meter and return the loop to its original configuration, then moving the bar magnet back and forth through the loop will induce an electrical current in the loop, as described by Faraday's law of electromagnetic induction.
What is magnet?A magnet is a material or object that produces a magnetic field, which is a force that can attract or repel certain other materials, such as iron or steel. The magnetic field is created by the motion of electric charges within the magnet, which align in such a way that they produce a net magnetic field. Magnets can be made from a variety of materials, including iron, cobalt, nickel, and certain alloys. They come in many different shapes and sizes, including bars, discs, horseshoes, and rings.
Here,
The type of current that is generated depends on the direction and rate of the magnet's motion. If the magnet is moved back and forth with a constant speed and in a straight line, the current induced in the loop will be an alternating current (AC), because the direction of the current will reverse every time the magnet changes direction. This can be observed by the voltage meter reading a voltage that periodically changes in direction.
To know more about magnet,
https://brainly.com/question/30563158
#SPJ1
A 1500kg car is skidding along a horizontal surface. If it is slowly brought to rest by the force of kinetic friction over a distance of 45 m (skidding to a stop), and if the coefficient of kinetic friction between the car and the road is 0.85, then what wa the initial speed of the car?
The initial speed of the car was approximately 24.9 m/s.
What is the initial speed of the car?
We can use the equation for the work done by kinetic friction to find the initial speed of the car. The work done by kinetic friction is given by:
W_friction = F_friction * d
where;
F_friction is the force of kinetic friction and d is the distance over which it acts.The force of kinetic friction is given by:
F_friction = m * g * μ
where;
m is the mass of the car, g is the acceleration due to gravity (9.81 m/s^2), and μ is the coefficient of kinetic friction between the car and the road.The work done by kinetic friction is equal to the change in kinetic energy of the car:
W_friction = (1/2) * m * v^2
where;
v is the initial speed of the car.Setting these two equations equal to each other and solving for v, we get:
(1/2) * m * v^2 = F_friction * d
(1/2) * m * v^2 = m * g * μ * d
v^2 = 2 * g * μ * d
v = √(2 * g * μ * d)
Substituting the given values, we get:
v = √(2 * 9.81 m/s^2 * 0.85 * 45 m)
v = 24.9 m/s
Learn more about initial speed here: https://brainly.com/question/24493758
#SPJ1
conventionally, the field strength around a charged object is the direction of the force acting on a choose... .
Conventionally, the field strength around a charged object is the direction of the force acting on a "positive test charge".
This convention is used because positive charges and negative charges experience opposite forces in an electric field, so the direction of the field is defined based on the force experienced by a positive charge. By convention, a positive test charge is used to define the direction of the field, even though in reality the direction and magnitude of the field would be the same for a negative test charge. This convention helps to avoid confusion and ensure consistent understanding of the direction and properties of electric fields.
You can learn more about field strength around a charged object at
https://brainly.com/question/3867990
#SPJ4
suppose that it had taken longer for the solar wind to clear away the solar nebula. which of the following consequences would have been most likely?
Some ice-rich objects in the Kuiper belt (such as Pluto or Eris) would have grown to larger sizes these are consequences solar wind to clear away the solar nebula.
Eventually, 4 effects clear away the nebula: the Sun's radiation pressure, the solar wind, the gravitation of the individual planets, and close encounters between planets and planetessimals. METEORS, COMETS, ASTEROIDS are left as residues of the planet formation process. Theoretical models for the solar nebula indicate a decreasing temperature with increasing distance from the Sun.
Shock waves from the explosion compressed the cloud of gas and dust. Compression made the cloud collapse, as gravity pulled the gas and dust together, forming a solar nebula. Just like a dancer that spins faster as she pulls in her arms, the cloud began to spin as it collapsed
Learn more about Solar nebula here:
https://brainly.com/question/14151385
#SPJ4
A child attempts to use a wrench to remove a nut on a bicycle. Removing the nut requires a torque of 10 N·m. The maximum force the child is capable of exerting at a 90°angle is 50 N. What is the length of the wrench the child must use to remove the nut?
The child must use a wrench that is at least 20 centimeters long to remove the nut with the maximum force they can exert.
The torque exerted by the child must be equal to or greater than the required torque of 10 N·m to remove the nut. The formula for torque is torque = force x length x sin(theta), where theta is the angle between the force and the wrench.
Rearranging the formula, we can find the required length of the wrench by dividing the required torque by the force and the sin of the angle.
Length = Torque / (Force x sin(theta))
Using the given values, we get:
Length = 10 N·m / (50 N x sin(90°))
sin(90°) = 1
Length = 0.2 meters or 20 centimeters
Therefore, the child must use a wrench that is at least 20 centimeters long to remove the nut with the maximum force it can exert.
For more questions like Torque click the link below:
https://brainly.com/question/7580653
#SPJ4
Problem 3: A 0.072 F capacitor is being held at a potential difference of 333 V. 33% Part (a) what is the charge, in coulombs, on one of the plates? 02.40 10-11 Q = 2.4E-11 Correct! 33% Part (b) If you measure the size of each plate to be 29 cm2, how far apart are the plates, in micrometers? d-3.56 106 d 3.56E-6 X Attempts Remain Feedback: The answer provided was not correct. We have recognized the following ier va the number in he cormer unisoe 33% Part (c) What is the magnitude of the electric field inside this capacitor, in newtons per coulomb? Your answer appears to be off by a factor of 10n, where n is an integer value. Ensure you have represented the number in the correct units. Grade Summary Deductions 100% 0%
The magnitude of the electric field inside the capacitor is: E = 93.53 x 10^3 N/C (or 93.53 kN/C)
Describe Electric Field?An electric field is a physical quantity that describes the influence that an electric charge exerts on other charges within the space around it. It is defined as the force per unit charge that a test charge would experience at a given point in space, in the presence of an electric charge or charges.
Electric fields are typically represented by vectors, which have both magnitude and direction. The strength of an electric field is measured in units of volts per meter (V/m).
Electric fields are fundamental to understanding the behavior of electrical systems, including electronic circuits and power grids. They also play a critical role in the functioning of many natural phenomena, such as lightning, the aurora borealis, and the behavior of atoms and molecules.
Part (a) To find the charge on one of the plates, we can use the formula:
Q = C x V
where Q is the charge, C is the capacitance, and V is the potential difference.
Substituting the given values, we get:
Q = 0.072 F x 333 V = 23.976 C ≈ 2.4 x 10^-11 C
Therefore, the charge on one of the plates is approximately 2.4 x 10^-11 coulombs.
Part (b) To find the distance between the plates, we can use the formula:
C = ε0 x (A/d)
where ε0 is the permittivity of free space, A is the area of each plate, and d is the distance between the plates.
Solving for d, we get:
d = ε0 x A / C
Substituting the given values, we get:
d = (8.85 x 10^-12 F/m) x (0.29 m)^2 / 0.072 F = 3.56 x 10^-6 m = 3.56 micrometers (μm)
Therefore, the distance between the plates is approximately 3.56 μm.
Part (c) The electric field inside the capacitor can be calculated using the formula:
E = V/d
where V is the potential difference and d is the distance between the plates.
Substituting the given values, we get:
E = 333 V / (3.56 x 10^-6 m) = 93.53 x 10^3 V/m
However, the question asks for the magnitude of the electric field in newtons per coulomb. To convert from volts per meter to newtons per coulomb, we can use the formula:
1 V/m = 1 N/C
Therefore, the magnitude of the electric field inside the capacitor is:
E = 93.53 x 10^3 N/C (or 93.53 kN/C)
To know more about coulomb visit:
https://brainly.com/question/15167088
#SPJ1
a jet plane is cruising at 320 m/s when suddenly the pilot turns the engines up to full throttle. after traveling 4.0 km , the jet is moving with a speed of 400 m/s . a. What is the jets acceleration, assuming it to be a constant acceleration?
b. Is your answer reasonable ? Explain.
A acceptable acceleration for a jet plane in these circumstances is 25 m/s2. The jet in this problem accelerates quickly from cruising speed to a higher speed.
What are velocity and acceleration?Velocity is the term for the rate at which a displacement changes. Acceleration is the term for the measurement of a change in velocity.
a. To determine the jet's acceleration, we can apply the equation for constant acceleration:
v_f² = v_i + 2ad
Substituting the given values, we get:
(400 m/s)² = (320 m/s)² + 2a(4.0 km)
Simplifying and solving for a, we get:
a = [(400 m/s)² - (320 m/s)²] / (2 × 4.0 km)
≈ 25 m/s²
To know more about acceleration visit:-
https://brainly.com/question/12550364
#SPJ4
identify the region of the electromagnetic spectrum where the wavelength measurement of 5 pm can be found.
A wavelength of 5 pm corresponds to the X-ray region of the electromagnetic spectrum.
What is the electromagnetic spectrum?The range of electromagnetic radiation's frequencies, along with the corresponding photon energies and wavelengths, is known as the electromagnetic spectrum.
All radio waves (such as commercial radio and television, microwaves, and radar), infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays are all included in the entire electromagnetic spectrum, which ranges in frequency from the lowest to the highest (longest to shortest wavelength).
Learn more about the electromagnetic spectrum at: https://brainly.com/question/2261239
#SPJ1
A 10kg bowling ball is moving at 10 m/s when it strikes a 3.0kg bowling pin at rest after the collision tge pin moves foward at 12m/s what is the speed of the bowling ball aftdd the collision
The speed of the bowling ball after the collision is 4 m/s.
What is momentum?The momentum is defined as the product of the mass and the velocity of the body.
We can use the law of conservation of momentum to solve this problem, which states that the total momentum of a system remains constant in the absence of external forces. The initial momentum of the system (bowling ball + bowling pin) is:
pi= m₁v₁ + m₂ v₂
= 10 kg x 10 m/s + 3 kg x 0 m/s
= 100 kg m/s
where m₁ is the mass of the bowling ball, v₁l is its velocity before the collision, m₂ is the mass of the bowling pin, and v'₂ is its velocity before the collision (which is zero since it's at rest).
After the collision, the momentum of the system is:
pf = m₁v'₁ + m₂ v'₂
Where v'₁ is the velocity of the bowling ball after the collision, and v'₂ is the velocity of the bowling pin after the collision.
Since momentum is conserved, we have:
pi= pf
Substituting the values we know, we get:
100 kg m/s = 10 kg x v'₁ + 3 kg x 12 m/s
Solving for v'₁, we get:
v'₁ = (100 kg m/s - 3 kg * 12 m/s) / 10 kg
v'₁ = 4 m/s
Therefore, the speed of the bowling ball after the collision is 4 m/s.
To know more about momentum follow
https://brainly.com/question/30054767
#SPJ1
if 3 circular bars made up of glass, steel, aluminium having equal cross section applied with muiltiaxial load at same point in same direction , which bar will produce more stress
If 3 circular bars made up of glass, steel, aluminium having equal cross section applied with muiltiaxial load at same point in same direction , The bar will produce more stress: glass
If 3 circular bars made up of glass, steel, aluminium having equal cross section applied with muiltiaxial load at same point in same direction, the bar made of glass will produce more stress.
This is because the modulus of elasticity of glass is lower than that of steel and aluminium. The modulus of elasticity is a measure of a material's resistance to deformation under load. A lower modulus of elasticity means that the material is more prone to deformation and therefore, will produce more stress under the same load.
In general, the stress produced in a material under load is given by the equation:
stress = load / cross-sectional area
Since the cross-sectional area of the bars is equal and the load applied is the same, the stress produced will depend on the modulus of elasticity of the material. Therefore, the bar made of glass will produce more stress under the same load as compared to the bars made of steel and aluminium.
To know more about stress refer here:
https://brainly.com/question/30646193#
#SPJ11
The steel bar will produce the most stress when applied with a multi-axial load at the same point in the same direction, as steel is the strongest of the three materials (glass, steel, and aluminium).
The bar made of steel will produce more stress under a multi-axial load at the same point in the same direction. This is because steel has a higher Young's modulus, or the measure of the ability of a material to withstand changes in length when under tension or compression, than glass or aluminum. Therefore, it will experience greater stress under the same loading conditions. Steel has a much higher Young's modulus than glass or aluminum, meaning it will experience greater stress under the same loading conditions.
For more such questions on Young's modulus.
https://brainly.com/question/30756002#
#SPJ11
Vegetable does not burn if we use while frying it, why?
Vegetable oil does not burn if we use it while frying it because liquid oil itself does not burn. Rather, it is the vapor from oil that has reached its boiling and vapor point that ignites.
Why does vegetable oil not burn?There are three things, for our purposes, to understand. The flash point, the fire point, and the ignition point. The ignition point is responsible for burning. To avoid oil burns, carefully and gently lower the food into the oil with your hands or tongs, and make sure that it drops away from you.
When oil starts to smoke it will impart a burnt, bitter flavor thanks to a substance released called acrolein. During this process, harmful compounds called polar compounds may also be released as a byproduct of the breakdown of that oil as it's exposed to heat.
Therefore, vegetable oil does not burn if we use it while frying it because liquid oil itself does not burn.
To learn more about Vegetable oils, refer to the link:
https://brainly.com/question/1381520
#SPJ9
(figure 1) shows a charged particle surrounded by three different closed surfaces, (a) , (b) , and (c) . in each case, the charge on the particle and the geometry of the left side (left of the dashed line) of the surface are identical. the closed surfaces have different geometries to the right of the dashed line.
To the west of the dotted line, the closed surface have various geometrical configurations. A charged particle is encircled by three distinct closed surfaces in (Figure 1): (a), (b), and (c). In every
What does the word "charge" mean?
to permeate or fill, such as a quality or feeling: Tension was charged in the air. 6. a. To accuse or blame someone for wrongdoing: The prosecutors accused him of car theft. The author was accused by critics of lacking creativity. b. To assign blame for; ascribe or impute: charged the driver's inexperience with being at fault for the accident.
What exactly is a charged expense?
Government expenses that must be covered without a vote are referred to as charged expenditures. It implies that these payments will take place regardless of whether Parliament approves the budget. Charged expenses are additionally referred to as "non-votable" expenses. The main account of the government is used to make these payments.
To know more about charged visit:
https://brainly.com/question/11568733
#SPJ4
what is the peak wavelength of light coming from a star with a temperature of 5300 k? (submit your answer in nanometers. remember 1 nm
The peak wavelength of light coming from a star with a temperature of 5300 K is 550 nm.
The peak wavelength of light coming from a star with a temperature of 5300 K can be calculated using Wien's law. According to Wien's law, the peak wavelength of a blackbody is inversely proportional to its temperature. The peak wavelength of a blackbody with a temperature of 5300 K can be calculated using the equation: λpeak = 0.0029/T, where T is the temperature in K. Plugging in the temperature of 5300 K into the equation results in a peak wavelength of 0.00055 μm or 550 nm. Therefore, the peak wavelength of light coming from a star with a temperature of 5300 K is 550 nm.
To learn more about wavelength
brainly.com/question/13533093
#SPJ4
The peak wavelength coming out of a star which has a temperature of 5300 K is 547 if 1 nm= 10-9 m
Peak wavelength is the one wavelength at which the light source's radiometric emission spectrum is at its broadest. Simply put, it represents photo-detectors rather than the human eye's perception of any emission from the light source.
To calculate a peak wavelength, we have to divide Wien's displacement constant by the absolute temperature
The Wien's displacement law, which states that the absolute temperature of a black body is inversely proportional to the electromagnetic wavelength at its maximal radiation intensity, is the law for which Wien's constant is well known.
Learn more about Peak wavelength here brainly.com/question/11274711
#SPJ4
when the motorcyclist is at a he increases his speed along the vertical circular path at a rate. if he starts at va
Initial acceleration is the acceleration of an object at a specific moment in time, typically at the start of a motion. It is the acceleration of an object at the beginning of its motion or when it is first subjected to a force.
Acceleration is a vector quantity that describes the rate at which an object's velocity changes with respect to time. It is the measure of how quickly the object's speed and/or direction is changing. An object can have varying accelerations depending on the forces acting on it, such as gravity or friction.The initial acceleration can be calculated using the formula a = v^2/r, where v is the initial velocity and r is the radius of circular path.
To solve this problem, use the conservation of energy and Newton's second law.
First, calculate the height of point B above point A.
Use the fact that the vertical component of the motorcycle's velocity is zero at the top of the circle, so the kinetic energy is entirely due to the horizontal component of velocity. Therefore, at point B, the kinetic energy of the motorcycle is equal to the potential energy it had at point A:
[tex]mgh = 1/2 mv^2[/tex]
where m is the mass of the motorcycle, g is the acceleration due to gravity, h is the height of point B above point A, and v is the speed of the motorcycle at point B.
Cancel out the mass of the motorcycle, and use the given values to solve for h:
[tex]gh = 1/2 v^2 - 1/2 vA^2[/tex]
[tex]h = (1/2 v^2 - 1/2 vA^2) / g[/tex]
[tex]h = (1/2 (v^2 - vA^2)) / g[/tex]
[tex]h = (1/2 ((0.04 s) t)^2 - 2^2) / 32.2 ft/s^2[/tex]
[tex]h = (0.0008 t^2 - 4) / 32.2 ft[/tex]
Next, use the fact that the motorcycle's acceleration is directed towards the centre of the circle, and has a magnitude of:
[tex]a = v^2 / r[/tex]
where r is the radius of the circle. At point A, the velocity is purely horizontal, so the initial acceleration is:
[tex]aA = vA^2 / r[/tex]
Use the fact that the acceleration is given by:
[tex]a = d(˙v)/dt[/tex]
where ˙v is the rate of change of the velocity with respect to time. Integrating this equation gives:
v - vA = ∫a dt
v = vA + ∫a dt
Since the acceleration is constant, substitute the expression derived for aA and integrate over the time it takes the motorcycle to travel from A to B. We can use the fact that the distance traveled along the circle is equal to the height difference h we calculated earlier, so the time it takes to travel from A to B is:
[tex]t = sqrt(2h / g)[/tex]
[tex]t = sqrt((0.0008 t^2 - 4) / 16.1)[/tex]
Squaring both sides and rearranging, we get a quadratic equation in t^2:
[tex]t^4 - 27.3t^2 + 674.5 = 0[/tex]
Solving for t^2 using the quadratic formula, we get:
[tex]t^2 = 13.4 or t^2 = 50.3[/tex]
Since the time cannot be negative, take the positive root:
t = 3.66 s
Substituting this value into the expression for the velocity,
[tex]v = 2 ft/s + (0.04 s/ft/s^2)(3.66 s)[/tex]
[tex]v = 2.1464 ft/s[/tex]
Therefore, the magnitude of the motorcycle's velocity when it reaches point B is approximately 2.15 ft/s. The initial acceleration is:
[tex]aA = vA^2 / r = (2 ft/s)^2 / 16 ft = 0.25 ft/s^2[/tex]
To know more about Initial Acceleration, visit:
https://brainly.com/question/460763
#SPJ4
A motorcyclist is traveling along a vertical circular path. At point A, the motorcyclist has an initial velocity of vA = 2 ft/s and an initial position of s = 0. The motorcyclist increases their speed along the path at a rate of ˙v = (0.04s) ft/s^2, where s is in feet. Determine the magnitude of the motorcyclist's velocity when they reach point B. Also, what is the motorcyclist's initial acceleration at point A?