A 1317 mg dose of niacinamide, there are 3.27 x 10²² carbon atoms.
Niacinamide, also known as vitamin B3, is an organic molecule that is nitrogen-containing and derived from niacin. It gets into our metabolic pathways as coenzymes in the forms of NAD and NADP.
This substance is found in Nicomide, an acne treatment, and is used by some individuals as a nutritional supplement to treat high cholesterol.
The molar mass of niacinamide, the molecular formula of niacinamide, and Avogadro's number. Avogadro's number is 6.022 x 10²³, The molar mass of niacinamide is 123.11 g/mol.
The number of moles in 1.317 g of niacinamide using the formula: moles = mass / molar mass. moles = 1.317 g / 123.11 g/mol= 0.0107 moles. he number of atoms present in the niacinamide, we must use Avogadro's number.
The molecular formula for niacinamide is C₆H₆N₂O. There are 6 carbon atoms in this molecule because C₆H₆N₂O means there are 6 carbon atoms.
Multiply the number of moles by Avogadro's number to get the number of molecules, and then multiply that by the number of atoms in the molecule.
Thus, 0.0107 mol x 6.022 x 10²³ / mol x 6 atoms / molecule = 3.27 x 10²² carbon atoms. Therefore, in a 1317 mg dose of niacinamide, there are 3.27 x 10²² carbon atoms.
to know more about carbon refer here:
https://brainly.com/question/22530423#
#SPJ11
Water is cooled from 95°C to 75°C how much heat is released from this 80 g sample
The amount of heat released by the 80 g sample of water is approximately 6694.4 J.
Steps
To calculate the amount of heat released by the 80 g sample of water, we can use the specific heat capacity of water and the formula:
Q = m * c * ΔT
where Q is the amount of heat released, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.
The specific heat capacity of water is 4.184 J/g°C.
The change in temperature is:
ΔT = 95°C - 75°C = 20°C
Substituting the given values, we have:
Q = 80 g * 4.184 J/g°C * 20°C = 6694.4 J
Therefore, the amount of heat released by the 80 g sample of water is approximately 6694.4 J.
learn more about heat capacity here
https://brainly.com/question/21406849
#SPJ1
Identify each of the following statements as describing a chlorination reaction or a bromination reaction. Only ONE can be used for each.
A. Propagation step requires more engery.
B. enthalphy of the reaction is endothermic
C. halogenation yields more than one major product
D. carbon-halogen bond dissociation energy is higher
E. the enthalpy of the reaction is exothermic
F. the halogenation is selective
Answer : A. Propagation step requires more energy : Chlorination reaction, B. Enthalpy of the reaction is endothermic : Bromination reaction, C. Halogenation yields more than one major product : Chlorination reaction, D) Carbon-halogen bond dissociation energy is higher : Bromination reaction, E. The enthalpy of the reaction is exothermic : Bromination reaction, F. The halogenation is selective : Chlorination reaction
Propagation step requires more energy - This statement is describing a chlorination reaction because in a chlorination reaction, the propagation step (adding a chlorine atom to the reactant) requires more energy than the initiation step. B. Enthalpy of the reaction is endothermic - This statement is describing a bromination reaction because in a bromination reaction, the reaction enthalpy is endothermic.
This statement is describing a chlorination reaction. This statement is describing a bromination reaction because in a bromination reaction, the carbon-halogen bond dissociation energy is higher than in a chlorination reaction. This statement is describing a bromination reaction because in a bromination reaction, the reaction enthalpy is exothermic.
Know more about endothermic here:
https://brainly.com/question/23184814
#SPJ11
When we say that liquid water is unstable on Mars, we mean that
a) a cup of water would shake uncontrollably
b) it is impossible for liquid water to exist on the surface
c) any liquid water on the surface would quickly either freeze or evaporate
When we say that liquid water is unstable on Mars, we mean that any liquid water on the surface would quickly either freeze or evaporate. The correct option is c.
Mars is the fourth planet from the sun in the Solar System, with a diameter of around 6,779 kilometers (4,212 miles) and a day length of around 24.6 hours. It's also known as the Red Planet because of its reddish appearance. It is a terrestrial planet, which means that it is similar in structure and composition to Earth.The temperature on Mars:The temperature on Mars can be as cold as -143 degrees Celsius and as high as 35 degrees
Mars also has a very low atmospheric pressure, making it difficult for humans to live on the planet. "Water is a vital component for life as we know it, but it is also a challenging molecule to handle becau'se of its complicated properties. On Mars, the presence of water is vital to determining whether or not the planet could have supported life in the past, now, or in the future. Therefore, the correct option is c.
Know more about atmospheric pressure here:
https://brainly.com/question/30166820
#SPJ11
postcranial material from ardipithecus shows evidence only for a bipedal adaptatoin exclusively on the ground
Ardipithecus, an extinct hominin species that lived around 4.4 million years ago, holds a significant place in the study of human evolution due to its bipedal adaptation.
Bipedalism, or the ability to walk on two feet, is a defining characteristic of modern humans and their immediate ancestors. The discovery of bipedalism in Ardipithecus sheds light on the evolutionary history of human locomotion and provides insights into the origins of bipedalism in our lineage.
The evidence for bipedalism in Ardipithecus comes from postcranial material, or skeletal remains below the head. The analysis of these remains reveals features that are indicative of bipedal adaptation, such as the shape of the pelvis, femur, and foot.
These features are similar to those found in modern humans and other bipedal primates, and they suggest that Ardipithecus was capable of walking upright on two feet.
However, the bipedal adaptation in Ardipithecus seems to have been exclusively for ground-based locomotion. This is inferred from the absence of features that would suggest adaptations for arboreal, or tree-dwelling, locomotion, such as long arms, curved fingers, or grasping feet.
Instead, the postcranial features of Ardipithecus point towards an adaptation for life on the ground, indicating that this species likely did not spend much time in trees.
The bipedalism exhibited by Ardipithecus is significant because it provides important clues about the evolution of human locomotion. Bipedalism is considered a key factor in the evolution of early human ancestors, as it freed the hands for tool use and enabled more efficient movement on the ground.
The discovery of bipedalism in Ardipithecus suggests that this form of locomotion may have evolved earlier in the human lineage than previously thought, and that it may have initially been adapted for ground-based activities rather than arboreal activities.
Studying Ardipithecus and its bipedal adaptation also provides insights into the ecological and environmental context in which early humans lived.
The absence of arboreal adaptations in Ardipithecus suggests that this species inhabited open environments with less reliance on tree-dwelling behaviors.
This has implications for understanding the habitat and lifestyle of Ardipithecus, as well as the ecological factors that may have influenced the evolution of bipedalism in our lineage.
In conclusion, the discovery of bipedalism in Ardipithecus is a significant finding in the field of human evolution. It provides insights into the evolution of human locomotion and the origins of bipedalism in our lineage.
The bipedal adaptation in Ardipithecus appears to have been exclusively for ground-based locomotion, suggesting that this species likely did not spend much time in trees and was adapted for life on the ground.
Further research on Ardipithecus and its bipedal adaptation can help us better understand the evolutionary history of human locomotion and the ecological context in which our early ancestors lived.
To learn more about bipedalism, refer below:
https://brainly.com/question/31114646
#SPJ11
Draw the hydrogen bonding of G-C and A-T pairs by hand. For each hydrogen bond, please point out which are hydrogen bond donors, and which are hydrogen bond acceptors.
Everyone agrees that guanine-cytosine (GC) base pairs have three hydrogen bonds, but adenine-thymine (AT) base pairs only have two.
What do adenine's hydrogen bond acceptors and donors look like?Testing the significance of the these two polar organisations together necessitates an analogue whereby both are replaced to nonpolar functionality, preferably maintaining steric dimensions and forms as closely as possible. Adenine carries a hydrogen - bonding acceptor (N1) as well as a donor (NH2) along its Watson-Crick base pairing edge.
What do donors and acceptors of cytosine hydrogen bonds do?Three hydrogen bonds hold guanine-cytosine base pairs, often known as GC base pairs, together. The bases are marked with the names of the hydrogen - bonding donors and recipients. The hydrogen - bonding donors all are NH groups. Nitrogen and oxygen atoms with a single pair of electrons can act as hydrogen bond acceptors.
To know more about adenine-thymine visit:
https://brainly.com/question/15305540
#SPJ1
a second chemist repeated the three experiments and observed that the reaction rates were considerably greater than those measured by the first chemist, even though the concentrations of the reactants and the temperature in the laboratory were the same as they were for the first chemist. which of the following is the best pairing of a claim about a most likely cause for the greater rates measured by the second chemist and a valid justification for that claim?
A. The pressures of the gases used by the second chemist must have been lower than those used by the first A) chemist, thus the collisions between reacting particles were less frequent than they were in the first chemist's experiments. B. The pressures of the gases used by the second chemist must have been lower than those used by the first chemist, thus the number of collisions with sufficient energy to cause reaction was lower than it was in the first chemist's experiments.
C. The second chemist must have added a catalyst for the reaction, thus providing a different reaction pathway for the reactant particles to react with an activation energy that was lower than that of the uncatalyzed reaction in the first chemist's experiments. D. The second chemist must have added a catalyst for the reaction, thus providing energy to reactant particles to increase their rate of reaction compared to their rate of reaction in the first chemist's experiments.
The correct option is (c). The second chemist must have added a catalyst for the reaction, thus providing a different reaction pathway for the reactant particles to react with an activation energy that was lower than that of the uncatalyzed reaction in the first chemist's experiments.
A catalyst acts as an intermediate between two reactants, increasing the reaction rate and allowing the reaction to occur at lower temperatures and pressures. By lowering the activation energy needed for the reaction, the reaction rate is increased.
Thus, the second chemist adding a catalyst explains why the reaction rate was greater than what the first chemist observed even when the concentrations of the reactants and the temperature in the laboratory were the same.
Therefore, the correct answer is (c).
To know more about catalysts, refer here:
https://brainly.com/question/12260131#
#SPJ11
2. Draw the Lewis dot structures for each of the following molecules:
a. H₂S
C. SO3
b. CH₂Br₂
d. HCN
The Lewis structures that can be drawn for a compound would show all the valence electrons as dots.
What is the use of Lewis structures?Lewis structures, also known as electron dot structures, are used in chemistry to represent the valence electrons of an atom or a molecule. They are useful for understanding the bonding and reactivity of elements and molecules.
Lewis structures are a fundamental tool in chemistry that are used to understand the bonding and reactivity of elements and molecules.
Learn more about Lewis structure:https://brainly.com/question/20300458
#SPJ1
what is the root mean square velocity of n2 at 425 k?
The root mean square velocity of N2 at 425 K is 569.8 m/s.
Here’s how to derive it:
Root mean square velocity (Urms) is given by the following equation:
Urms = [3RT/M]^(1/2)
Where R is the universal gas constant,
T is the temperature in Kelvin,
and M is the molar mass of the gas in kg/mol.
To calculate Urms for N2 at 425 K, we’ll need to find the value of R, T, and M.
Let's work out each one of them: R = 8.31 J/mol K (this is the universal gas constant)
T = 425 K (this is the temperature)M = 28 g/mol
(this is the molar mass of N2 in g/mol)
We’ll need to convert the molar mass of N2 from grams to kg: 28 g/mol = 0.028 kg/mol
Now, let's plug in the values to the equation for Urms :
Urms = [3RT/M]^(1/2)Urms = [3 x 8.31 J/mol K x 425 K / 0.028 kg/mol]^(1/2)Urms = 16632.75^(1/2)Urms = 569.8 m/s
For similar question on Urms velocity.
https://brainly.com/question/5464330
#SPJ11
how many millilitres of 0.200 m naoh are required to neutralize 20.0 ml of 0.100 m hcl?
10.0 mL of 0.200 M NaOH is required to neutralize 20.0 mL of 0.100 M HCl.
To calculate the milliliters of 0.200 M NaOH that are required to neutralize 20.0 mL of 0.100 M HCl, the following steps are used:
Step 1: Write the balanced chemical equation 2 NaOH (aq) + H2SO4 (aq) → Na2SO4 (aq) + 2 H2O (l)
Step 2: Determine the number of moles of the HCl solution: Concentration = 0.100 MVolume = 20.0 molarity = moles / LTherefore, Moles of HCl = (0.100 mol/L) × (20.0 mL / 1000 mL/L) = 0.00200 moles of HCl
Step 3: Determine the number of moles of NaOH needed to neutralize the HCl.The balanced equation shows that one mole of NaOH reacts with one mole of HCl.Therefore, Moles of NaOH = Moles of HCl = 0.00200 moles of NaOH
Step 4: Determine the volume of NaOH needed to reach the moles of NaOH needed to neutralize the HCl.Concentration = 0.200 MVolume = ?Molarity = moles / LTherefore, Volume = Moles / Molarity = 0.00200 moles / 0.200 M = 0.0100 L = 10.0 mL.
Learn more about molarity here:
https://brainly.com/question/8732513
#SPJ11
Ian noticed that during a reaction the beaker containing his reactants got very cold. What kind of reaction is this?
Answer: Endothermic Reaction
Explanation:
It is Endothermic Reaction because, during Endothermic reaction, heat is absorbed from the surrounding. It is cold because, due to the reaction, the heat is absorbed, lowering the temperature of the mixture in the beaker, making the reactants cold.
Review these definitions, and make sure to not get confused between Exothermic and Endothermic reactions.
Exothermic Reaction: A chemical reaction where energy is released.
Endothermic Reaction: A chemical reaction where energy is absorbed from the environment.
Which of the following options correctly identify the principal information that can be obtained from a mass spectrum of an organic compound? Select all that apply.
A. Molecular mass
B. Molecular formula
C. Identification of functional groups
D. Definitive solution of C-H framework of molecule
The principal information that can be obtained from a mass spectrum of an organic compound include molecular mass, molecular formula, identification of functional groups, and definitive solution of C-H framework. Thus, the correct options are A, B, C, and D.
What is Mass spectroscopy?Mass spectroscopy can provide the following information: Molecular weight, Molecular formula, Structural information, such as connectivity of atoms, functional groups, and the degree of saturation. Isotopic composition of atoms in the molecule.
The mass spectrum can provide information on a compound's molecular weight and its molecular formula. It can also provide information on the compound's structural elements, such as the presence of functional groups or the degree of saturation. Mass spectrometry is often used to identify organic compounds.
Therefore, the correct options are A, B, C and D.
Learn more about Mass spectroscopy here:
https://brainly.com/question/28497322
#SPJ11
The student decides to determine the molarity of the same Na2CO3 solution using a second method. When Na2CO3 is dissolved in water, CO3 ^2−(aq) hydrolyzes to form HCO3 ^−(aq), as shown by the following equation.CO3 2−(aq) + H2O(l) HCO3 −(aq) + OH−(aq) Kb = [HCO3^ -][OH^- ]/ [CO3^2- ] - - - = 2.1 × 10^−4explain how the student could use the measured value in part (f)(i) to calculate the initial concentration of co3-2 (aq). (do not do any numerical calculations.)
To calculate the initial concentration of CO32- (aq), the student can use the measured value from part (f)
(i) to calculate the equilibrium concentration of HCO3- (aq) and OH- (aq)
according to the equilibrium expression: Kb = [HCO3-]eq [OH-]eq / [CO32-]eq.
The student can then use the equilibrium concentrations to calculate the initial concentration of CO32- (aq) by solving the equilibrium expression for [CO32-]eq.
The initial concentration of CO32- (aq) is equal to the sum of the equilibrium concentrations of HCO3- (aq) and OH- (aq).
to know more about equilibrium refer here:
https://brainly.com/question/30807709#
#SPJ11
For a 1. 00 m ( 100 cm) crumble zone, how much deformation do you think is needed in order to keep the passenger the safest? Explain
For maximum passenger safety, a crumple zone must deform by at least 12 to 18 inches (30 to 45 centimetres).
A crumple zone is a part of a vehicle designed to absorb the energy of an impact during a collision, thus reducing the impact on the passengers. The amount of deformation required in a crumple zone depends on various factors such as the speed of the vehicle, the mass of the vehicle, and the angle of the impact.
In general, a deformation of at least 12 to 18 inches (30 to 45 cm) is needed in a crumple zone to keep the passengers the safest. This level of deformation helps to slow down the vehicle's momentum and absorb the kinetic energy generated during a collision. The deformation of the crumple zone helps to extend the time of the impact, which in turn reduces the impact force on the passengers.
However, the specific amount of deformation required for a crumple zone can vary depending on the design of the vehicle and the safety standards set by regulatory bodies. Car manufacturers use crash tests to evaluate the effectiveness of their crumple zones and make improvements accordingly.
To learn more about deformation refer to:
brainly.com/question/2612478
#SPJ4
write a balanced chemical equation for the standard formation reaction of solid vanadium(v) oxide v2o5.
The standard formation reaction of solid vanadium(V) oxide V2O5 is represented by the balanced chemical equation:
2V (s) + 5O2 (g) → 2V2O5 (s)
The standard formation reaction is the process in which one mole of a compound is formed from its constituent elements in their standard state at standard conditions of temperature and pressure. Solid vanadium(V) oxide V2O5 is an inorganic compound that is used as a catalyst in various industrial processes such as the production of sulfuric acid, ceramics, and glass. It is formed from the reaction of vanadium metal and oxygen gas at high temperatures. Standard state refers to the physical state of an element or compound under standard conditions of temperature and pressure (STP). The standard state of a substance can be solid, liquid, or gas. At STP, the standard pressure is 1 atmosphere (atm) and the standard temperature is 25°C.
Complete question is as:
Write a balanced chemical equation for the standard formation reaction of solid vanadium(v) oxide v2o5.with no stoichiometric numbers in the answer.
Learn more about balanced chemical equations at brainly.com/question/28294176
#SPJ11
NEED ASAP PLEASE HELP ITS DUE TMRW:How many orbiting telescopes does NASA have and what are their names? WILL GIVE 5 STARS AND THANKS -20 PTS
There are over 90 orbiting telescopes, but I will name the major ones:
Hubble Space Telescope
Chandra X-ray Observatory
Spitzer Space Telescope
Herschel Space Observatory
Planck Observatory
Kepler Mission
Fermi Gamma-ray Space Telescope
Swift Gamma Ray Burst Explorer
GALEX
Solar & Heliospheric Observatory
STEREO
Classify each substance as a strong acid, strong base, weak acid, or weak base. Drag the appropriate items to their respective bins NH3 HCOOH KOH CSOH CH3NH2 HF (CH3)2NH HI CH COOH HCIO Strong acids:Weak acids: Strong bases:Weak bases:
The given substances are listed as follows strong acids as HCIO, HI; weak acids as [tex]CH_3COOH[/tex], [tex]CH_3NH_2[/tex], HCOOH, HF; strong bases as KOH, CSOH and weak bases as [tex]NH_3(CH_3)_2NH[/tex].
Substances are classified into four types strong acids, weak acids, strong bases, and weak bases.
Strong acids: Strong acids are acidic substances that have high ionization capacity. These acids are said to be strong acids because they have a pH of less than 7.0. HCl, [tex]H_2SO_4[/tex], and [tex]HNO_3[/tex] are examples of strong acids.Weak acids: Weak acids are acidic substances that have a low ionization capacity. These acids are said to be weak acids because they have a pH of greater than 7.0. [tex]CH_3COOH, CH_3NH_2,[/tex] HCOOH and HF are examples of weak acids.Strong bases: Strong bases are basic substances that have a high degree of ionization capacity. These bases are said to be strong bases because they have a pH of greater than 7.0. NaOH, KOH, and [tex]Ca(OH)_2[/tex] are examples of strong bases.Weak bases: Weak bases are basic substances that have a low degree of ionization capacity. These bases are said to be weak bases because they have a pH of less than 7.0. [tex]NH_3[/tex] and [tex](CH_3)_2NH[/tex] are examples of weak bases.Learn more about strong acids: https://brainly.com/question/30900251
#SPJ11
why should the electrodes be kept in fixed relative positions during the electrolysis? is it really necessary for them to be parallel?
It is important to keep the electrodes in a fixed relative position during electrolysis as it affects the current that passes through the solution.
For example, if the electrodes are placed too close together, the current will be too strong and can cause damage to the system. Additionally, having the electrodes in a parallel position ensures that the current flows evenly through the entire solution. This is because having the electrodes parallel helps to ensure that the current flows in the same direction and not at different angles. This helps to keep the current steady and prevents hot spots or localized over-voltage. In conclusion, it is necessary to keep the electrodes in a fixed relative position, parallel to each other, during electrolysis to ensure the current is distributed evenly and not too strong.
For more questions on electrolysis
https://brainly.com/question/12994141
#SPJ11
4. C2 JAN 08 Q10c
In groundwater, trichloroethene is slowly hydrolysed to produce compound A, which
contains a carboxylic acid group, -COOH.
(1) Describe a test, including reagent(s) and expected observation(s), which could
be used to confirm that compound A contains a carboxylic acid functional
group.
[2]
5. C2 JAN 06 Q5
State which one of the following is the most soluble in water.
A Hexan-1-o
B 2-Methylbutane
C Propene
D Propanoic acid
E
[1]
Answer:
1. To confirm the presence of a carboxylic acid functional group in compound A, a test could be performed using sodium bicarbonate (NaHCO3) or sodium hydroxide (NaOH) solution. When a carboxylic acid is mixed with sodium bicarbonate or sodium hydroxide, it will react to produce carbon dioxide gas, which can be observed as effervescence (bubbling) or fizzing. Alternatively, a pH test strip could be used to test the acidity of the solution, as carboxylic acids are acidic and will lower the pH of the solution.
2. The most soluble in water among the given choices is D, propanoic acid. Propanoic acid is a carboxylic acid, and carboxylic acids are generally soluble in water due to their ability to form hydrogen bonds with water molecules. The other choices (A, B, C, and E) are nonpolar compounds and are generally insoluble in water.
(please could you kindly mark my answer as brainliest)
suppose a .14 m aqueous solution of oxalic acid () is prepared. calculate the equilibrium molarity of . you'll find information on the properties of oxalic acid in the aleks data resource.
The equilibrium molarity of H+ ions in the given solution of oxalic acid is 0.316 M.
Oxalic acid is a diprotic acid, which means that it can donate two hydrogen ions (H+) to a solution. The chemical formula of oxalic acid is H2C2O4. Given that a 0.14 m aqueous solution of oxalic acid (H2C2O4) is prepared, we need to calculate the equilibrium molarity of H+ ions. We can use the ionization reaction of oxalic acid to determine the concentration of H+ ions in solution.
H2C2O4(aq) → 2 H+(aq) + C2O42-(aq)
The equilibrium constant expression for this reaction is given by:
K = [H+]^2 [C2O42-] / [H2C2O4]
Since oxalic acid is a weak acid, we can assume that the concentration of oxalate ions (C2O42-) is negligible compared to the initial concentration of oxalic acid. Therefore, we can simplify the expression as follows:
K = [H+]² / [H2C2O4]
We can also express the concentration of oxalic acid in terms of H+ ions using the dissociation constant (Ka) for the first ionization step of oxalic acid:
H2C2O4(aq) + H2O(l) ⇌ H3O+(aq) + HC2O4-(aq)
Ka = [H3O+][HC2O4-] / [H2C2O4]
Since we are dealing with a dilute solution, we can assume that the concentration of water is constant and cancel it out from the equation. We can also assume that the concentration of HC2O4- ions is negligible compared to the concentration of H2C2O4. Therefore, we can simplify the expression as follows:
Ka = [H3O+]² / [H2C2O4]
Rearranging the equation, we get:
[H3O+] = √(Ka [H2C2O4])
Substituting the given values, we get:
[H3O+] = √(5.9 × 10^-2 × 0.14)
[H3O+] = 0.316 M
Therefore, the equilibrium molarity of H+ ions in the given solution of oxalic acid is 0.316 M.
More on equilibrium molarity: https://brainly.com/question/15213840
#SPJ11
Thermometer
Fractionating
Colu
Found-bottom
Mask
Bunsen burner
Water out
Condenser
Water in
set-up A
4
8
set-up B
c) Label the apparatus above as 'reflux' or 'distillation'.
d) Briefly explain the purpose of using a reflux condenser in an organic synthesis.
Answer:
a) Thermometer
b) Fractionating Column
c) Found-bottom Flask
d) Mask
e) Bunsen Burner
f) Water Out
g) Condenser
h) Water In
Set-up A: Reflux Set-up
Set-up B: Distillation Set-up
d) The purpose of using a reflux condenser in organic synthesis is to prevent the loss of volatile reactants or products. During a reflux reaction, the reactants are continuously heated, and the vapors are condensed and returned to the reaction vessel, which allows the reaction to proceed for an extended period without losing any material to the atmosphere. The reflux condenser also helps to maintain a constant temperature and prevent overheating.
(please could you kindly mark my answer as brainliest)
Phosphorus reacts with oxygen to form diphosphorus 4P(s)+5O2(g)⟶2P2O5(s) How many grams of P2O5 are formed when 7.65 g of phosphorus reacts with excess oxygen? Show the unit analysis used for the calculation by placing the correct components into the unit-factor slots.
17.51 g of P2O5 is formed when 7.65 g of phosphorus reacts with excess oxygen. Unit analysis used for the calculation:
What is unit analysis?Unit analysis or dimensional analysis is a mathematical method to convert one unit to another unit. It is based on the idea of multiplying by a conversion factor, which is a fraction in which the same quantity is expressed in two different units.
Balanced equation: 4P(s)+5O2(g)⟶2P2O5(s)
Molar mass of P = 30.97 g/mol
Molar mass of P2O5 = 141.94 g/mol
Number of moles of P = given mass / molar mass
Number of moles of P = 7.65 g / 30.97 g/mol
Number of moles of P = 0.24674 mol
Number of moles of P2O5 = (number of moles of P) / (4 mol of P produces 2 mol of P2O5)
Number of moles of P2O5 = 0.24674 mol / 2Number of moles of P2O5 = 0.12337 mol
Mass of P2O5 = number of moles of P2O5 × molar mass of P2O5
Mass of P2O5 = 0.12337 mol × 141.94 g/mol
Mass of P2O5 = 17.51
Thus, 17.51 g of P2O5 is formed when 7.65 g of phosphorus reacts with excess oxygen.
To know more about unit analysis:
https://brainly.com/question/30637489
#SPJ11
Will give brainliest need help asap!!!!!
At what Celsius temperature will argon have a density of 10.3 g/L and a pressure of 6.43 atm?
(31 deg. C)
To solve this problem, we can use the ideal gas law:PV = nRT where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
What is the volume ?Volume refers to the amount of space occupied by a three-dimensional object. It is a measure of the physical size of an object and is typically measured in cubic units such as cubic meters (m³), cubic centimeters (cm³), or liters (L). The volume of an object can be calculated by measuring its length, width, and height or by displacement of a fluid.
What is a displacement ?Displacement refers to the change in position of an object from its initial position to its final position. It is a vector quantity that is defined as the shortest distance between the initial and final positions of an object, and is represented by the symbol "Δx" or "d". Displacement is different from distance, which is the total length traveled by an object regardless of its initial and final positions.
To know more about volume visit :
https://brainly.com/question/13338592
#SPJ1
Can any help with this chemistry question?? I have an exam tomorrow
(20 points)
The standard enthalpy of formation of TiCl₄ (I) is -750kJ mol ⁻¹. The correct answer for the given reaction of Titanium tetrachloride is thus option C.
What is standard enthalpy of formation?The standard enthalpy of formation (ΔH°f) is the modification in enthalpy that happens when one mole of a substance is formed from its component elements in their standard states under standard conditions of temperature and pressure (298 K and 1 atm pressure).
To determine the standard enthalpy of formation for TiCl₄ (I), we need to use Hess's law and combine the given reactions in a way that cancels out all the other reactants and leaves only TiCl₄ (I) as the product. We can achieve this by reversing the first equation and adding it to the second and third equations:
Ti(s) + 2Cl₂(g) + 2CO₂(g) → TiCl₄ (l) + 2CO₂(g) + 2Cl₂(g) ∆H = +232 kJ mol⁻¹
Ti(s) + O₂(g) → TiO₂(s) = −912 kJ mol⁻¹
C(s) + O₂(g) → CO₂(g) = −394 kJ mol⁻¹
Now, we can cancel out the CO₂(g) and Cl₂(g) on both sides and simplify the equation to:
Ti(s) + 2Cl₂(g) + C(s) → TiCl₄ (I) ∆H = +232 kJ mol⁻¹ - 2(-394 kJ mol⁻¹) - 912 kJ mol⁻¹ = -750 kJ mol⁻¹
Therefore, the correct value for the standard enthalpy of formation for TiCl₄ (I) is -750 kJ mol⁻¹.
To find out more about standard enthalpy of formation, visit:
https://brainly.com/question/30264187
#SPJ1
which is not true of acid deposition? it is primarily due to the burning of coal. it is treated using limestone. it can occur as a result of mining. it causes increased solubility of many ions.
It can occur as a result of mining is not true of acid deposition so option (B) is incorrect .
What is acid deposition ?Acid deposition, also known as acid rain, occurs when emissions from fossil fuel combustion and other industrial processes undergo complex chemical reactions.
Wet deposition (rain, snow, cloud, fog) or dry deposition (dry particles, gas) occur in the atmosphere and fall to the earth. Rain and snow are naturally acidic, but are only considered dangerous when their pH falls below 5. (see ph. scale).
What is combustion ?Combustion, also known as burning, is a high-temperature exothermic redox chemical reaction that occurs between a fuel (the reductant) and an oxidant, typically atmospheric oxygen, to produce oxidized, often gaseous products in a mixture known as smoke. Because a flame is only visible when substances undergoing combustion vaporize, combustion does not always result in fire, but when it does, a flame is a characteristic indicator of the reaction. While activation energy must be overcome to initiate combustion (e.g., using a lit match to start a fire), the heat from a flame may provide enough energy to sustain the reaction.
to know more about acid deposition , visit ;
brainly.com/question/19999169
#SPJ1
how many chirality centers are there in a 2-ketohexose?
The correct answer is that a 2-ketohexose has three chirality centers, one at each of the carbon atoms numbered 3, 4, and 5.
A 2-ketohexose is a six-carbon sugar with a ketone functional group at the second carbon atom. In general, a chirality center, also known as a stereocenter, is an atom in a molecule that is bonded to four different substituents, resulting in two or more non-superimposable mirror image structures. For a six-carbon sugar, there are typically four chirality centers, one at each of the carbon atoms numbered 2, 3, 4, and 5. However, in a 2-ketohexose, the ketone functional group at carbon 2 eliminates the chirality center at that carbon, resulting in only three chirality centers at carbon atoms 3, 4, and 5. Therefore, a 2-ketohexose has three chirality centers, one at each of the carbon atoms numbered 3, 4, and 5.
To learn more about chirality centers click the link below
brainly.com/question/29842209
#SPJ4
Although many metabolic pathways classify as catabolic or anabolic, the citric acid cycle is amphibolic. Select the statements that describe amphibolic characteristics of the citric acid cycle. o Catabolic pathways for several macromolecules involve the citric acid cycle. o Both oxidation and reduction reactions occur. o Both catabolic and anabolic processes occur. o Oxaloacetate is a product of the citric acid cycle and an amino acid precursor. o The citric acid cycle produces oxaloacetate, a substrate for gluconeogenesis.
The statements which describe amphibolic characteristics of citric acid cycle include catabolic pathways for several macromolecules involve the citric acid cycle. Both oxidation and reduction reactions occur. Thus, the correct options are A, B, C, and E.
What is citric acid cycle?The citric acid cycle is an amphibolic metabolic pathway because both catabolic and anabolic processes occur within it. The following statements describe the amphibolic characteristics of the citric acid cycle: Catabolic pathways for several macromolecules involve the citric acid cycle. Both oxidation and reduction reactions occur. Oxaloacetate is a product of the citric acid cycle and an amino acid precursor. The citric acid cycle produces oxaloacetate, a substrate for gluconeogenesis.
Therefore, the correct options are A, B, C, and E.
Learn more about Citric acid cycle here:
https://brainly.com/question/29857075
#SPJ11
Which of the compounds listed below, when added to water, is/are likely to increase the solubility of AgCl? A. Ammonia, B. NH3 Sodium cyanide, C. NaCN Potassium chloride,
D. KCl
AgCl is more likely to dissolve in water when ammonia (NH3) is present. This is due to the fact that ammonia and AgCl may combine to create the water-soluble complex ion, Ag(NH3)2+.
How well does AgCl dissolve in NH3 H2O?At 25°C, the solubility of AgCl in water is 0.0020 g of AgCl per litre of H2OS.
AgCl dissolves in NH3 at a rate of 14.00 g per kilogramme of NH3 when the temperature is 25°C. Due to the production of the soluble stable complex [AgNH32]+, AgCl is more soluble in NH3. Since oxygen is more electronegative than nitrogen, ammonia is less polar than water.
In water or acid, is AgCl soluble?AgCl is well known to be insoluble in water whereas NaCl and KCl are soluble in the pedagogical literature: implementations of Elementary studies of both qualitative and quantitative analysis make this distinction.
To know more about ammonia visit:-
https://brainly.com/question/20524322
#SPJ1
When the following two solutions are mixed:
K2CO3(aq)+Fe(NO3)3(aq)
the mixture contains the ions listed below. Sort these species into spectator ions and ions that react.
Drag the appropriate items to their respective bins.
NO3-)aq), Fe3+ , CO3 2-, K+
Part B
What is the correct net ionic equation, including all coefficients, charges, and phases, for the following set of reactants? Assume that the contribution of protons from H2SO4 is near 100 %.
Ba(OH)2(aq)+H2SO4(aq)?
The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq) is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]
When the following two solutions are mixed:
[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:
[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.
Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :
https://brainly.com/question/11510759
#SPJ11
If 200 grams of potassium nitrate are mixed with 100 grams of water at 85°C, how much will not dissolve?
PLEASE HELP
The solubility of potassium nitrate in water increases as the temperature increases. At 85°C, the solubility of potassium nitrate is approximately 155 grams per 100 grams of water.
What is a gram ?Grams is a metric unit of mass, which is used to measure the weight or amount of an object or substance. It is abbreviated as "g" and is equivalent to one-thousandth of a kilogram. The gram is commonly used in science, medicine, and cooking for measuring small quantities of materials.
What is a nitrate ?A nitrate is a chemical compound that contains the polyatomic ion NO3-. It is composed of one nitrogen atom and three oxygen atoms. Some common examples of nitrates include potassium nitrate (KNO3), sodium nitrate (NaNO3), and ammonium nitrate (NH4NO3). Nitrates are often used in fertilizers, explosives, and food preservation.
To know more about gram visit :
https://brainly.com/question/11260752
#SPJ1
Read through each scenario. Under the scenario, write which lab safety rule is being broken.
Explanation:
1. Carlos is using unknown chemicals, which is breaking the rules that state: "Treat every chemical hazardous" and "No chemical should be taken without proper authorisation".
2. Jane doesn't know where the eye-wash station is, so she is breaking Rule #1: "Know locations of laboratory safety showers, eyewash stations, and fire extinguishers. The safety equipment may be located in the hallway near the laboratory entrance."
3. Harry has broken the rule that says that "No horseplay will be tolerated." He has turned on the hot plate without instruction.
4. Brent is eating in class. Eating in laboratories where hazardous materials are present is prohibited, yet he still eats a bagel. He is at risk of food poisoning.
5. Sniffing or tasting chemicals can be dangerous or even deadly as the vapours or fumes can contain traces of unknown toxins.
6. She should be more careful, and according to lab safety rules, she should put her bag in the designated areas and work independently unless she is told by her instructor to do otherwise.
7. Rachel should dress for the lab. If she doesn't and her clothes react badly to the chemicals, it would pose serious health problems.
8. I don't know about this question.
9. Water can act as a reactant, so the chemical in the sink may damage the lab or outside pipes if corrosive. Experiments should be left in the lab unless told to do otherwise by the instructor.
10. Clean up at the end of lab. In this situation, Diana and Mike didn't clean up thoroughly, which can damage their bench top.
11. Jake is performing experiments without permission. He may become a threat to himself if his body gets contaminated.
12. The experiments wouldn't be conducted correctly, which may contaminate the students around them or damage the lab. Heather and Jennifer might pose a threat to the lab.
13. Again, tasting or smelling lab materials are strictly prohibited. Rebecca may harm her digestive system if she tries an unknown salt.
14. Unwanted reactions may occur, and the result might be acidic, corrosive, contaminate the surrounding area or discolour some places.
15. Because if we do not follow procedures and rule, we may damage some tools or fellow students.