In order to balance a chemical equation steps to be followed are : Identify atoms on each side.Count atoms on each side.Numbering steps for balancing Equations in sequential order.Use coefficients to increase atoms on each side.Check to make sure you have same number of each type of atom on each side.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
Learn more about chemical equation,here:
https://brainly.com/question/30087623
#SPJ9
Your question is is incomplete, the complete question will be:
Numbering the Steps for Balancing Equations in a sequential order:
Use coefficients to increase the atoms on each side.
Check to make sure you have the same number of each type of atom on each side.
Count the atoms on each side.
Identify the atoms on each side.
How is the mass of the vaporized liquid determined in this experiment
The mass of the vaporized liquid can be determined by measuring the mass of the container before and after the vaporization process.
The difference in mass can be used to calculate the mass of the vaporized liquid. Vaporization is a type of phase transition in which a substance in its liquid state is converted into a gaseous state. During this process, molecules in the liquid state absorb enough energy to break the bonds that hold them together, allowing them to move freely in the gas phase.For example, if the container had a mass of 100 grams before the vaporization process, and had a mass of 90 grams after the vaporization process, then the mass of the vaporized liquid would be 10 grams.
learn more about vaporizationb refer:brainly.com/question/30078883
#SPJ4
At what position(s) will electrophilic aromatic substitution occur for the following compound?bromobenzene
In bromobenzene, the bromine atom is an electron-withdrawing group that deactivates the ring towards electrophilic substitution reactions. However, since the bromine atom is ortho-para directing, it directs incoming electrophiles to the ortho and para positions relative to itself.
Therefore, electrophilic aromatic substitution can occur at either the ortho or para positions in bromobenzene, and the meta position is less favored due to the deactivating nature of the bromine atom.
The reaction could be summarized as follows:
+ E+ + HX
| |
Ar-Br + E+ → Ar-E + HBr
| |
+ E+ + HX
where Ar represents the aromatic ring, Br represents the bromine atom, E+ represents the electrophile, and HX represents the acid catalyst.
learn more about electrophilic here:
https://brainly.com/question/29454942
#SPJ4
Set up a graph x-y scatter plot showing the solubility curve of each salt (SEP 5). Hint: you have one graph with all four salts. The x-axis is your independent variable the y-axis is your dependent variable. Graph needs to be titled, axis labels for both x and y, and labels for each curve.
The solubility curve curve shows the way that solubility is plotted against temperature
How do we prepare the solubility curve?The question is incomplete but it has to do with the preparation of the solubility curve so I will talk about it.
To prepare the solubility curve, Plot the solubility of the solute in the solvent as a function of temperature. Typically, the solubility is plotted on the y-axis, and the temperature is plotted on the x-axis. Connect the points on the graph with a smooth curve to represent the solubility curve.
Learn more about solubility curve:https://brainly.com/question/14366471
#SPJ1
What was the main function of tRNA?
The main function of tRNA is to transfer amino acids to the ribosome during the process of protein synthesis.
During protein synthesis, tRNA molecules bind to specific amino acids in the cytoplasm and bring them to the ribosome.
Each tRNA molecule has an anticodon, which is a sequence of three nucleotides that is complementary to a specific codon on the mRNA.
The tRNA molecule binds to the mRNA at the codon and transfers the amino acid to the growing polypeptide chain.
In this way, tRNA plays a crucial role in the translation of the genetic code into proteins, which are the building blocks of all living organisms. Without tRNA, the process of protein synthesis would not be possible, and cells would not be able to carry out their functions.
To know more about tRNA here:
https://brainly.com/question/29775087#
#SPJ11
what is orders of reaction mean ?
Orders of reaction are an important aspect of chemical kinetics, as they are used to determine how the rate of a reaction is affected by the concentration of the reactants.
The order of a reaction with respect to a particular reactant is the power to which the concentration of that reactant is raised in the rate law. For example, if the rate law for a reaction is: rate = k[A]^2[B]
Then the order of the reaction with respect to reactant A is 2, and the order with respect to reactant B is 1. The overall order of the reaction is the sum of the orders with respect to each reactant, so in this case the overall order is 2 + 1 = 3.
Orders of reaction can be determined experimentally by measuring how the rate of a reaction changes as the concentration of the reactants is varied. They are important for understanding the mechanism of a reaction and for predicting how the rate of a reaction will change under different conditions.
Orders of reaction are used to describe how the rate of a reaction is affected by the concentration of the reactants, and they are determined experimentally by measuring how the rate changes as the concentration of the reactants is varied.
To know more about reaction here:
https://brainly.com/question/28984750#
#SPJ11
What is the pH of a solution that contains11.7 g of NaCl for every 200 mL of solution?1. 1.02. 10−13. 7.0 4. 1.0 × 10−7
To determine the pH of a solution of NaCl, we first need to find the concentration of the Na+ and Cl- ions in the solution. NaCl is a strong electrolyte and dissociates completely into Na+ and Cl- ions in water.
The molar mass of NaCl is 58.44 g/mol. Therefore, the number of moles of NaCl in 11.7 g can be calculated as:
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of NaCl = 11.7 g / 58.44 g/mol
moles of NaCl = 0.2 mol
The volume of the solution is given as 200 mL, which is equal to 0.2 L. Therefore, the concentration of Na+ and Cl- ions in the solution can be calculated as follows:
concentration = moles / volume
concentration of Na+ or Cl- = 0.2 mol / 0.2 L
concentration of Na+ or Cl- = 1 M
Since NaCl is a neutral salt, it does not contribute to the acidity or basicity of the solution. Therefore, the pH of the solution can be calculated using the concentration of H+ ions in the solution, which can be assumed to be equal to the concentration of OH- ions due to the autoionization of water.
pH = -log[H+]
pH = -log[OH-]
At 25°C, the concentration of H+ ions in pure water is 1.0 × 10^-7 M. Therefore, the concentration of OH- ions is also 1.0 × 10^-7 M.
Since the solution is neutral, the concentration of H+ and OH- ions must be equal. Therefore:
[H+] = [OH-] = 1.0 × 10^-7 M
Taking the negative logarithm of both sides gives:
pH = -log(1.0 × 10^-7)
pH = 7.0
Therefore, the pH of the solution is 7.0.
what is pH of a solution?
The pH of a solution is a measure of its acidity or basicity. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution, with a pH of 7 being neutral. The pH scale ranges from 0 to 14, with values less than 7 indicating acidity, values greater than 7 indicating basicity, and a pH of 7 indicating neutrality. A change of one unit on the pH scale represents a tenfold change in the concentration of hydrogen ions. The pH of a solution can be measured using a pH meter or through the use of indicators, which change color depending on the pH of the solution.
Hence, the answer is, the pH of the solution is 7.0.
To learn more about pH, follow the link:
https://brainly.com/question/15289741
#SPJ4
What the increasing concentration of atmospheric oxygen in earth’s the early atmosphere
The increasing concentration of atmospheric oxygen in Earth's early atmosphere is thought to be the result of the emergence and proliferation of photosynthetic organisms such as cyanobacteria.
What is Ethane?
Ethane is a hydrocarbon compound with the chemical formula C2H6. It is a colorless, odorless gas at standard temperature and pressure, and is the second simplest alkane after methane. Ethane is an important industrial chemical that is used primarily as a feedstock for the production of ethylene, which is then used in the manufacture of a wide range of plastics, resins, and other organic chemicals.
These organisms use sunlight to convert carbon dioxide and water into organic matter and oxygen gas through the process of photosynthesis. Over time, the accumulation of oxygen gas led to the development of the oxygen-rich atmosphere that supports complex life forms such as animals and plants. This process, known as the Great Oxygenation Event, occurred over a period of millions of years and is believed to have fundamentally altered the evolution and ecology of life on Earth.
Learn more about Ethane from given link
https://brainly.com/question/68465
#SPJ4
How does nitrogen fixation lead to enhanced plant growth?ONitrogen fixation prevents pathogens from infecting the plant. ONitrogen fixation directly by the plant is very expensive in terms of metabolic energy. ONitrogen fixation prevents herbivores from eating the plant. OFixed nitrogen can be used by plants to produce protein ONitrogen fixation enables prokaryotes to supply the plant with proteins directly
Nitrogen fixation can lead to enhanced plant growth with Fixed nitrogen can be used by plants to produce protein. Option D is correct.
Fixed nitrogen can be used by plants to produce protein, which is necessary for growth and development. Nitrogen is a key component of amino acids, which are the building blocks of proteins. Amino acids are used by plants to make enzymes, chlorophyll, and other important molecules.
However, atmospheric nitrogen gas (N₂) cannot be directly used by plants. Nitrogen fixation is the process by which atmospheric nitrogen is converted into a usable form, such as ammonia (NH₃) or nitrate (NO₃⁻), by certain bacteria or other microorganisms.
These microorganisms can either form a symbiotic relationship with the plant, living in the roots or nodules, or exist independently in the soil. Once the fixed nitrogen is available in the soil, plants can take it up through their roots and use it to produce proteins and other nitrogen-containing molecules, leading to enhanced growth and productivity.
Hence, D. Fixed nitrogen can be used by plants to produce protein is the correct option.
To know more about Nitrogen fixation here
https://brainly.com/question/19938608
#SPJ4
--The given question is incomplete, the complete question is
"How does nitrogen fixation lead to enhanced plant growth? A) Nitrogen fixation prevents pathogens from infecting the plant. B) Nitrogen fixation directly by the plant is very expensive in terms of metabolic energy. C) Nitrogen fixation prevents herbivores from eating the plant. D) Fixed nitrogen can be used by plants to produce protein E) Nitrogen fixation enables prokaryotes to supply the plant with proteins directly."--
for an acid base indicator to work well for your titration, it should change color. t/f
A chemical known as an acid-base indicator alters color when the pH of a solution changes. this statement is true.
What is an acid-base indicator?When a chemical is protonated or deprotonated, it changes its color, making it an acid-base indicator. Since this color shift only happens within a certain pH range, indicators can be used to roughly determine the equivalence point of an acid-base titration. Acidic substances cause blue litmus paper to turn red. If something is basic or alkaline, blue litmus paper will become red. In basic solutions, litmus turns blue, while in acidic solutions, it turns red.If there is a base present, red litmus paper becomes blue. Upon contact with an acid, blue litmus paper turns crimson. Only whether a solution is an acid or a base may be determined by using litmus paper; the pH of the solution is not. Use pH paper, universal indicator solution, pH meters, or any combination of these to determine ph.To learn more about acid-base indicator refer to:
https://brainly.com/question/30553094
#SPJ4
metal and dirt are not considered contaminants to oil. t/f
The statement "Metal and dirt are not considered contaminants to oil" is false.
What is meant by metal?Chemical elements known as metals have a high thermal conductivity, are ductile, and have high electrical conductivity. Metals include gold, silver, magnesium, helium, and others. They contain both solids and gases, and they are exceedingly reactive.Contamination of oil is referred to as oil and dirt. There is an issue with oil pollution because it generates a chemical reaction in the oil. Depletion or oxidation are some of the reactions it produces.There are numerous opportunities for metals, oxides, and other contaminants to be present in motor oils. As a result, the lubrication of engine components performs less effectively, resulting in debris and friction.When newly produced, polished, or shattered, a material exhibits a glossy look and quite good electrical and thermal conductivity. This substance is called a metal. The majority of metals are malleable and ductile. The metallic link that exists between the atoms or molecules of the metal is what gives rise to these characteristics.To learn more about metal refer to:
https://brainly.com/question/24868523
#SPJ4
what are the equilibrium partial pressures of pcl3 , cl2 , and pcl5 , respectively?
Equilibrium partial pressures of PCl₃ , Cl₂ , and PCl₅ are 0.3atm,0.2atm and 0.6atm respectively.
In a combination of gases, every constituent gas has a partial pressure which is the notional pressure of that constituent gas as though it alone involved the whole volume of the first blend at the equivalent temperature.[1] The complete tension of an ideal gas blend is the amount of the halfway tensions of the gases in the blend (Dalton's Regulation).
The partial pressure of a gas is a proportion of thermodynamic action of the gas' particles. Gases break down, diffuse, and respond as per their halfway tensions yet not as per their focuses in gas blends or fluids. This overall property of gases is additionally evident in compound responses of gases in science. For instance, the fundamental measure of oxygen for human breath, and the sum that is harmful, is set by the halfway tension of oxygen alone.
This is valid across an exceptionally extensive variety of various groupings of oxygen present in different breathed in breathing gases or broke down in blood;[2] subsequently, blend proportions, similar to that of breathable 20% oxygen and 80%, not entirely settled by volume rather than by weight or mass.
Besides, the partial pressure of oxygen and carbon dioxide are significant boundaries in trial of blood vessel blood gases. All things considered, these pressure can likewise be estimated in, for instance, cerebrospinal liquid.
To know more about partial pressure,visit here:
https://brainly.com/question/15075781
#SPJ4
Amino acids with hydrophobic R groups are most often found buried in the interior of folded proteins.
True/False
The given statement "mino acids with hydrophobic R groups are most often found buried in the interior of folded proteins" is true statement because amino acids with hydrophobic (water-fearing) R groups tend to be nonpolar, and are therefore typically not attracted to water.
This means that when they are incorporated into a protein, they are more likely to be found buried in the interior of the protein where they are shielded from the surrounding aqueous environment. This is because the hydrophobic R groups of these amino acids prefer to interact with other nonpolar groups rather than with water molecules. In contrast, amino acids with hydrophilic (water-loving) R groups are more likely to be found on the surface of the protein, where they can interact with water and other polar molecules.
You can learn more about amino acids at
https://brainly.com/question/28362783
#SPJ4
what chemical does your brain release when you are kind?
The chemical that your brain releases when you are kind is called oxytocin.
Oxytocin is a hormone that is associated with social bonding, trust, and positive social interactions. It is released in response to positive social interactions, such as hugging or showing kindness to others.
Studies have shown that increased levels of oxytocin can lead to increased empathy and pro-social behavior, such as generosity and cooperation. Additionally, oxytocin has been shown to decrease stress levels and promote feelings of calm and relaxation.
Overall, practicing kindness can not only benefit those around us but also have positive effects on our own mental and emotional well-being.
Learn more about oxytocin
brainly.com/question/8492292
#SPJ4
Calculate the mass of chlorine gas needed to react with 84. 0 grams of aluminum to produce aluminum chloride
The mass of chlorine gas needed to react with 84 grams of aluminum is 331.21 grams.
Balanced chemical equationTo calculate the mass of chlorine gas needed to react with 84.0 grams of aluminum to produce aluminum chloride, we can use the balanced chemical equation for the reaction:
2Al + 3Cl₂ → 2AlCl₃
From the balanced equation, we can see that 2 moles of aluminum react with 3 moles of chlorine gas to produce 2 moles of aluminum chloride. We can use this mole ratio to determine the mass of chlorine gas needed.
First, we need to convert the mass of aluminum to moles:
84.0 g Al × (1 mol Al / 26.98 g Al) = 3.11 mol Al
Next, we can use the mole ratio from the balanced equation to determine the moles of chlorine gas needed:
3.11 mol Al × (3 mol Cl₂ / 2 mol Al) = 4.67 mol Cl₂
Finally, we can convert the moles of chlorine gas to mass:
4.67 mol Cl₂ × (70.90 g Cl₂ / 1 mol Cl₂) = 331.21 g Cl₂
Therefore, the mass of chlorine gas needed to react with 84.0 grams of aluminum to produce aluminum chloride is 331.21 grams.
Learn more about stoichiometric calculation here brainly.com/question/27287858
#SPJ11
How does second-order affect reaction rate?
In second-order reactions, the reaction rate is directly proportional to the exponential value of the reactants concentration.
Second order reactions can be defined as reactions where the sum of the exponents in the corresponding chemical reaction rate law is equal to two. The rate of second order reaction can be written either as r = k[A]², or as
r = k[A][B],
where r --> rate of reaction
k ---> rate constant
The units of rate constant, k for a second-order reaction are 1/(M-s). For example: consider the reaction,
2HI --> H₂ + I₂
Rate of reaction = [HI]²
Thus, second-order reaction rate is proportional to the square of the reactant concentration or the product of the concentration of two reactants.
For more information about second order reaction, visit :
https://brainly.com/question/17586293
#SPJ4
A chain lying on the ground is 10 m long and its mass is 70 kg. How much work (in j) is required to raise one end of the chain to a height of 6 m? (use 9. 8 m/s2 for g. ).
The work required to raise one end of the chain to a height of 6 m is 2058 J.The work required to lift an object is given by the formula:
W = mgh
where W is the work done, m is the mass of the object, g is the acceleration due to gravity, and h is the height to which the object is lifted.
In this case, the mass of the chain is 70 kg, the height to which it is lifted is 6 m, and the acceleration due to gravity is 9.8 m/s^2. We need to find the work required to lift one end of the chain, which is half of the total chain, i.e., 5 m.
The mass of the half chain is:
m = (70 kg) / 2 = 35 kg
The work required to lift the half chain to a height of 6 m is:
W = mgh = (35 kg) x (9.8 m/s^2) x (6 m) = 2058 J
Therefore, the work required to raise one end of the chain to a height of 6 m is 2058 J.
Find more about work
brainly.com/question/28607417
#SPJ4
how many moles are in 100 gram?
There are approximately 0.555 moles in 100 grams of glucose.
One mole of a substance is defined as the amount of that substance which contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12. This number is known as Avogadro's number and is approximately 6.022 x 10²³ entities per mole.
The number of moles in 100 grams of a substance depends on its molar mass. To calculate the number of moles, we need to divide the given mass by the molar mass of the substance. The formula is:
Number of moles = given mass / molar mass
For example, if we want to find the number of moles in 100 grams of glucose (C₆H₁₂O₆), which has a molar mass of 180.16 g/mol, the calculation would be:
Number of moles = 100 g / 180.16 g/mol
Number of moles = 0.555 moles
To know more about moles here
https://brainly.com/question/20486415
#SPJ4
According to the department of transportation, hazardous materials are defined as a megerial that can pose an unreasonable risk to
According to the Department of Transportation (DOT), hazardous materials are defined as materials that can pose an unreasonable risk to health, safety, or property during transportation.
These materials can include explosives, flammable gases and liquids, toxic substances, radioactive materials, and more. The DOT has specific regulations in place for the transportation of these materials to ensure that they are handled and transported safely to minimize the risk of accidents or harm.
These regulations include:
Requirements for labeling, packaging, and transporting hazardous materials, as well as training for individuals involved in the transportation process.It is important to follow these regulations to prevent accidents and protect the health and safety of those involved in the transportation of hazardous materials.
Learn more about hazardous materials at: https://brainly.com/question/29232461
#SPJ11
herbivory in brassica plants can induce the production of defensive chemicals such as glucosinolates. for example, one effect of these chemicals is the inhibition of growth of caterpillars feeding on the plant. do a web search to learn more about glucosinolates and describe another way in which they can provide a defense for plants against being eaten. what function is?
The function is that these flora use a complicated protection system, called the mustard oil bomb, to do away with their enemies.
If plant tissues are wounded, glucosinolates and an enzyme called myrosinase come into contact, and, as a result, poisonous metabolites are shaped which deter maximum insects. The first line of protection in flora is an intact and impenetrable barrier composed of bark and a waxy cuticle. Both guard flora towards herbivores. Other variations towards herbivores consist of difficult shells, thorns (changed branches), and spines (changed leaves). Recent research have proven useful consequences of glucosinolates, consisting of regulatory features in inflammation, pressure response, section I metabolism, and antioxidant activities, in addition to direct antimicrobial properties.
To learn more about herbivores check the link below:
https://brainly.com/question/1048752
#SPJ4
in each reaction box, select the best reagent and conditions from each list.
The best reagent and conditions from each list :
1) AlCl₃ - CH₃Cl at room temperature
2) HNO₃ -H₂SO₄ at room temperature
3) Fuming HNO₃ -H₂SO₄ at 90-100 ⁰C heat .
Benzene will be converted to the toluene by the Friedel Craft Alkylation of the benzene . In this reaction the reagent AlCl₃ and the CH₃Cl is used .
Dinitritoluene will be prepared from the toluene by the Nitration . The reaction is uses the Electrophilic substitution mechanism . The reagents that used are HNO₃ and the H₂SO₄ at room temperature.
This reaction is the extended nitration of the toluene . The Further nitration is done in the extreme condition . The temperature of the reaction is increased to the 90- 100 ⁰ C.
To learn more about reagents here
https://brainly.com/question/28504619
#SPJ4
how much trends in the periodic table?
There are the main periodic trends in the periodic that is the electronegativity, the atomic size, the ionization energy, and the electron affinity, metallic character.
The main periodic trends in the periodic table is as :
The electronegativityThe atomic sizeThe ionization energyThe electron affinityThe metallic character1) The Electronegativity is the measures of how easily atom can attract the electrons to form the bond. it increases from left to right.
2) The atomic size decreases as we move in the period from the left to the right. the atomic size increases as we move in the group from the top to the bottom in the periodic table.
3) The ionization energy decreases as we move from to to the bottom in group.
4) The electron affinity increases as move left to right across period.
5) The metallic character decreases as we move left to right in period.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
6.0 mol NaOH can form
3.0 mol Na3PO4 while 9.0 mole H3PO4
can form 9.0 mol Na3PO4. What mass of
Na3PO4 forms?
Na3PO4: 164 g/mol
A total of 1984 grams of Na3PO4 is formed
How to find the mass of Sodium phosphate that formsFirst we first need to calculate the number of moles of Na3PO4 that are formed from 6.0 mol NaOH and 9.0 mol H3PO4.
From 6.0 mol NaOH, 3.0 mol Na3PO4 can be formed.
And from 9.0 mol H3PO4, 9.0 mol Na3PO4 can be formed.
So, in total, 3.0 + 9.0 = 12.0 mol Na3PO4 are formed.
Next, we can multiply the number of moles by the molar mass of Na3PO4 to find the mass.
mass = number of moles * molar mass
= 12.0 mol * 164 g/mol
= 1984 g
Therefore, a total of 1984 grams of Na3PO4 is formed.
Learn more about mass here : brainly.com/question/86444
#SPJ1
Which factor determines the shape of the spectra in NMR spectroscopy?
The shape of the spectra in nuclear magnetic resonance (NMR) spectroscopy is primarily determined by the chemical environment of the nucleus being studied. In NMR spectroscopy, a sample is exposed to a magnetic field, and the resulting NMR spectrum reflects the absorption of energy by the nuclei in the sample as they undergo transitions between different energy levels.
What is Spectra?
In physics and chemistry, a spectrum (plural: spectra) is a range of electromagnetic radiation or other physical quantities, such as sound or mass, that are ordered by their wavelengths or frequencies. The term spectrum can refer to a continuous range of values or to a discrete set of lines or bands that correspond to specific energy transitions.
The chemical environment of a nucleus in a molecule affects its NMR spectrum in several ways. One important factor is the shielding or DE shielding effect of neighboring atoms or groups. When a nucleus is surrounded by electrons, it experiences a shielding effect that reduces its magnetic field, causing it to resonate at a lower frequency. Conversely, when a nucleus is DE shielded by nearby electron-withdrawing groups, it resonates at a higher frequency. This effect is responsible for the chemical shift observed in NMR spectra.
The shape of the NMR spectrum can also be influenced by other factors such as the number and arrangement of neighboring nuclei, the spin-spin coupling between nuclei, and the relaxation time of the nuclei in the sample. Together, these factors determine the complex patterns observed in NMR spectra and provide a wealth of information about the chemical structure and environment of molecules.
Learn more about Spectra from given link
https://brainly.com/question/1968356
#SPJ4
in cold water climates, road crews salt the roads to lower the freezing point of water. how many grams of cacl2 should be added to 1000 l of water to lower its freezing point from 0.0 °c to –10.0 °c? the freezing point depression constant for water is 1.86 °c/m, and the density of water is 1.00 g/ml.
The grams of CaCl2 required to be added to 1000l of water to lower its freezing point from 0.0 °c to –10.0 °c is 0.29 kg.
How to calculate grams ?The quantity of solute dissociation in the solvent is measured by the van 't Hoff factor, or i. I = 1 applies to things like sugar that do not dissociate in water. I = 2 for solutes that totally split into two ions. For the purposes of this illustration, CaCl2 entirely splits into the ions Ca+2 and Cl-. Consequently, I = 2 T in this instance is equal to 10 °C.kg water = 1 kg water Equals density x volumeKf water is also 1.86 °C kg/mol.T = iKfm 10 = 2 x 1.86 °C kg/mol m = 2.69 MThe formula for molality is now molecular mass = grams of CaCl2/kg water.CaCl2 has a molar mass of 110.98 g/mol, Molar mass of CaCl2 is 110.98 g/molm= grams of CaCl2 / 0.110 × 12.69 = grams of CaCl2 /0.110×1Grams of CaCl2= 0.29 kgFor more information on freezing point kindly visit to
https://brainly.com/question/3121416
#SPJ1
Chemistry help needed !!
The approximate melting point of the substance represented by line from point B to point C. Phase change is associated with latent heat, as it reflects the energy absorbed or released during the phase change without any change in temperature.
ExplanationThe melting point is a specific temperature at which a substance undergoes a phase change from a solid state to a liquid state. Generally, most substances can exist in three phases: solid, liquid, and gas.
When a substance is heated, its temperature increases, and it goes through a phase change that naturally from solid to liquid and then from liquid to gas. During these phase changes, the temperature remains constant, as the energy is being used to break the intermolecular bonds that hold the particles together.
In the given graph,
The first horizontal line from point B to point C represents the temperature at which the substance is melting. This is the temperature at which the substance undergoes a phase change from a solid state to a liquid state.The second horizontal line on the graph that runs from point D to point E represents the approximate boiling point of the substance. This is the temperature at which the substance undergoes a phase change from a liquid state to a gas state.Learn more about melting point and boiling point on:
brainly.com/question/40140brainly.com/question/30861415brainly.com/question/29233996the mass of a gaseous compound of phosphorus is 3.9 g at 457.4 K in a 1.16 L container and at a pressure of 732.3 mm Hg. What is the molar mass of the compound
Consider the nuclear equation below.
22
NaNe +6
Which is the missing value that will balance the equation?
+2
Answer:
The Correct option is "+1"
In general, as activation energy increases, reaction rate _____.
A) goes down if the reaction is exothermic.
B) goes down if the reaction is endothermic.
C) stays the same regardless of whether the reaction is exothermic or endothermic.
D) goes down regardless of whether the reaction is exothermic or endothermic.
E) none of the above.
Reaction Rate:
The rate of a reaction shows how fast a reaction is completed. This can be affected by the temperature of the system, and some other factors including stirring, etc. These affect the rate of collision of the particles in the reaction mixture which also affects whether the particles will have good orientation.
In general, as activation energy increases, reaction rate D: "goes down regardless of whether the reaction is exothermic or endothermic".
The activation energy is the energy required to initiate a chemical reaction by breaking the bonds of the reactants. If the activation energy is high, fewer molecules will have enough kinetic energy to overcome this energy barrier, leading to a lower reaction rate. This is true for both exothermic and endothermic reactions. Therefore, as the activation energy increases, the reaction rate will decrease regardless of whether the reaction is exothermic or endothermic.
You can learn more about activation energy at
https://brainly.com/question/1380484
#SPJ4
A selenide ion is isoelectronic with which noble gas?a argonb xenonC radond krypton
A selenide ion is the isoelectronic with the noble gas is the correct option is d. krypton.
The atomic number of the selenide is 34. The electronic configuration of the selenide is as :
Electronic configuration of selenide = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁴
The selenide ion is Se²⁻, this means that the selenide ion gains the two electron and form the anion. The electronic configuration for the selenide ion is as :
Electronic configuration of Se²⁻ = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ or [Kr]
The atomic number of the krypton is 36. Therefore the selenide ion is isoelectronic with the krypton.
To learn more about krypton here
https://brainly.com/question/29480958
#SPJ4
the first element in the group of rare earth metalsi called?
The first element in the group of rare earth metal is called Lanthanum (La).
It is a silvery-white, malleable, and ductile metal that belongs to the lanthanide series of elements. Lanthanum has the atomic number 57 and is the first member of the lanthanide series, which includes 15 elements with atomic numbers ranging from 57 (La) to 71 (Lu).
Lanthanum is the first and the most abundant element in the lanthanide series of elements, which are also known as the rare earth elements. The rare earth metals, have unique electronic, magnetic, and optical properties that make them important in a wide range of technological applications.
To know more about Lanthanum here
https://brainly.com/question/14611133
#SPJ4
--The given question is incorrect, the correct question is
"The first element in the group of rare earth metal is called?"--