On the day Harvey is to present his dissertation, he wakes up with a severe headache. During the presentation, he feels no pain in his head. Fifteen minutes after the presentation is over, Harvey becomes aware of his headache again. Harvey's experience is best explained by

Answers

Answer 1

Gate-control theory

What is Gate-control theory?

According to the Gate Control Theory of Pain, the spinal cord has a system that allows pain signals to be amplified in the brain before being processed at the spinal cord itself, or attenuated there. 

The mechanism that allows or prevents the passage of pain signals is known as the gate. The gate may be open or it may be closed, one of two possibilities: 

When the gate is open, pain signals can enter and are delivered to the brain, where they are perceived as pain.If the gate is closed, pain signals will be prevented from ascending to the brain and won't be felt.

The administration of a non-noxious (soothing or light rubbing) stimulus can help engage the gate control mechanism and alleviate pain in those who are exposed to painful (noxious) stimuli.

Learn more about gate-control theory here:

https://brainly.com/question/15561467

#SPJ4


Related Questions

If two identical springs are put in parallel (side by side), what exactly
happens to the overall spring constant? Why?

Answers

The springs generate a combination of forces.Therefore, it may be said that when springs are utilized in parallel, their constants add up.

Do springs in parallel experience the same force?

In springs the force must be the same. In parallel circuits the sum of all the currents going through each branch must be equal to the total current going into the branches. In parallel springs, the total force from all the springs must equal the total force from the mass.

When springs are connected in parallel the deflection for each spring is?

2. Springs in Parallel: In parallel combination, force developed in each spring will be different but deflection in each spring will be equal.

To know more about springs visit:

https://brainly.com/question/14159361

#SPJ1

Calculate the change in the kinetic energy (ke) of the bottle when the mass is increased. Use the formula ke = one half. Mv2, where m is the mass and v is the speed (velocity). Assume that the speed of the soda bottle falling from a height of 0. 8 m will be 4 m/s, and use this speed for each calculation. Record your calculations in table a of your student guide.

Answers

If the mass of the bottle is 0.125 kg, its kinetic energy is 1 Kgm²/s².If the mass of the bottle is 0.250 kg, its kinetic energy is 2 Kgm²/s².If the mass of the bottle is 0.375 kg, its kinetic energy is 3 Kgm²/s².If the mass of the bottle is 0.500 kg, its kinetic energy is 4 Kgm²/s².

Kinetic energy is affected by the mass (m) and speed (v) of an object. If an object with mass m moves with speed v, then it can be said that the object has a kinetic energy of:

                          KE = 1/2 x mv2

In the given problem:

The speed of the soda bottle from a height of 0.8 meters is 4 m/s.

If the mass of the soda bottle is 0.125 kg, the KE is:

KE = 1/2 x mv2

KE = ½ x 0.125 x (4)2

KE = ½ x 0.125 x 16

KE = 1 Kgm²/s²

If the mass of the soda bottle is 0.250 kg, its KE is:

KE = 1/2 x mv2

KE = ½ x 0.250 x (4)2

KE = ½ x 0.250 x 16

KE = 2 Kgm²/s²

If the mass of the soda bottle is 0.375 kg, the KE is:

KE = 1/2 x mv2

KE = ½ x 0.375 x (4)2

KE= ½ x 0.375 x 16

KE = 3 Kgm²/s²

If the mass of the soda bottle is 0.500 kg, its KE is:

KE = 1/2 x mv2

KE = ½ x 0.500 x (4)2

KE = ½ x 0.500 x 16

KE = 4 Kgm²/s²

Complete the questions is:

Calculate the change in the kinetic energy (KE) of the bottle when the mass is increased. Use the formula KE = mv2, where m is the mass and v is the speed (velocity). Assume that the speed of the soda bottle falling from a height of 0.8 m will be 4 m/s, and use this speed for each calculation. Record your calculations in Table A of your Student Guide.

When the mass of the bottle is 0.125 kg, the KE is kg m2/s2. When the mass of the bottle is 0.250 kg, the KE is kg m2/s2. When the mass of the bottle is 0.375 kg, the KE is kg m2/s2. When the mass of the bottle is 0.500 kg, the KE is kg m2/s2.

Learn more about kinetic energy at https://brainly.com/question/25959744

#SPJ4

What is the difference between EVs and HEVs?

Answers

The main difference between electric vehicles (EVs) and hybrid electric vehicles (HEVs) is the power source.

The differences that stand out between the two in the energy force are:

EVs are powered entirely by electricity, while HEVs combine an internal combustion engine with an electric motor and battery. EVs are more efficient, produce zero emissions, and require less maintenance than HEVs, but may be limited in terms of range and require longer charging times. HEVs are more flexible, as they can switch between the electric motor and internal combustion engine to conserve energy and extend range. However, they also produce emissions and require more maintenance than EVs.

Both types of vehicles produce fewer emissions than traditional gas-powered cars and can be more fuel efficient.

Learn more about between EVs and HEVs:

https://brainly.com/question/13110442

#SPJ4

A block with the mass of 14.26kg is on a ramp with an incline of 41 degrees. If the block is stationary, what is the minimum value of the coefficient of static friction? [Please explain to me how you did it, I'm giving you 30 points lol the last two times I've asked ive gotten either no explanation or a link to a calculator...]

Answers

The minimum value of the coefficient of static friction between the surface and the stationary block is 0.87.

What is the coefficient of static friction?

The coefficient of static friction is equal to the tangent of the angle at which the objects slide.

Mathematically,

μs = tan(θ)

where;

μs is the coefficient of static frictionθ is the angle of inclination just before the object begins to slide.

Since the block is stationary, the minimum value of the coefficient of static friction will be:

μs = tan(41°)

μs = 0.87

Learn more about the coefficient of static friction at: https://brainly.com/question/28812417

#SPJ1

An amusement park ride consists of a rotating circular platform 7.4 m in diameter from which 10 kg seats are suspended at the end of 1.81 m massless chains. When the system rotates, the chains make an angle of 26.6 degree with the vertical. The acceleration of gravity is 9.8 m/sa). what is the speed of each seat? answer in units of m/sb). if a child of mass 49.1 kg sits in a seat, what is the tension in the chain ( for the same angle)? answer in units of N

Answers

The speed of each seat is 4.71 m/sec, if the radius of the rotating platform is 3.7 meter. If a child of 49.5 kg sits in a seat, then the tension in the chain will be 648.4 N.

Mass of each seat, m = 10 kg

Radius of the rotating platform, R = 7.4/2 = 3.7 m

Let the tension in the chain = T₁

Vertical angle made by the chain = 26.6°

There will be two components of the tension in chain. Vertical component of the chain will be balanced by the weight(mg) of the seat.

T×cos26.6 = 10 ×9.81

T = (10×9.81)/cos26.6

T = 109.7 N

Horizontal component of the tension in chain is balanced by the centrifugal force due to the circular motion of radius,

R₁ =  3.7 + 1.81×sin26.6

R₁ = 4.51 m.

Centrifugal force, F = mv²/R₁

(10×v²)/4.51 = 109.7 × sin26.6

(10×v²)/4.51 = 49.12

v² = (49.12 × 4.51)/10

v = 4.71 m/sec

If a child of mass 49.1 sits on the seat, then the total weight on the seat will be, W = (10+49.1) × 9.81 = 579.77 N

This weight will be balanced by the vertical component of the tension in the chain,

579.77 = T×cos26.6

T = 579.77/cos26.6

T = 648.4 N

To know more about speed, here

https://brainly.com/question/28224010

#SPJ4

How did the heavy elements originate and what did they create?

Answers

Heavy elements, such as gold, silver, and mercury, as well as the elements that make up the earth's core, such as iron and nickel, originated in the hearts of stars. They were created through the process of nuclear fusion, which occurs when the temperatures and pressures inside a star are high enough to overcome the electrostatic repulsion between the positively charged nuclei of atoms.

What are  heavy element?

When fusion occurs, the nuclei of the atoms merge, creating a new, heavier element. This process is called nucleosynthesis. The fusion of lighter elements, such as hydrogen and helium, produces heavier elements, such as carbon, oxygen, and neon.

Therefore, most heavy elements, such as gold and platinum, are created in supernovae, massive explosions that occur when the fuel in a star runs out, and the star collapses under its own gravity. The intense pressure and temperatures that are created during the collapse cause the nuclei of atoms to fuse together, creating elements with atomic numbers higher than iron.

Learn more about  heavy element from

https://brainly.com/question/17790057

#SPJ1

A mass on a spring undergoes simple harmonic motion. When the mass passes through the equilibrium position, its instantaneous velocity.

Answers

A mass on a spring undergoes simple harmonic motion. When the mass passes through the equilibrium position, its instantaneous velocity is maximum.

Simple harmonic motion or SHM is the alternating motion of an object that passes through a certain balance point. SHM has a fixed frequency and amplitude and is periodic, namely movements that occur regularly and are repeated at the same time.

When a spring undergoes simple harmonic motion, the mass accelerates in a direction toward the equilibrium point, then the velocity of the object at the equilibrium point is maximum. The object is accelerating in a direction toward the equilibrium point. Acceleration caused by the force recovered.

Learn more about simple harmonic motion at:

https://brainly.com/question/2624223?

#SPJ4

A cyclist is rounding a 20-m radius curve at 12 m/s. What is the minimum possible coefficient of static friction between the bike tires and the ground?

Answers

The minimum possible coefficient of static friction between the bike tires and the ground is 0.734.

The minimum possible coefficient of static friction is that at which the moving object is on the verge of the stopping state.

Radius of the curve, (R) = 20 m.

Velocity of the cyclist, (v) = 12 m/sec

g = 9.81 m/s²

On a circular curve, the cyclist will experience the centrifugal force(F) which acts outwards. This force is,

F = mv²/R

This centrifugal force(F) is balanced by the static friction force(Fₓ). Which is,

Static friction force = mg × coefficient of static friction(Ц)

mv²/R = mg × coefficient of static friction(Ц)

coefficient of static friction(Ц) = v²/gR

= (12×12)/(9.81×20)

= 0.734

To know more about static friction, here

https://brainly.com/question/24882156

#SPJ4

18. A vertical spring has a length of 25cm when a 150g mass is hung from its end and its length is 30cm with 250g hanging from it. What is the spring constant? a) 19.6N/cm b) 19.6n/m c) 109.6N/m d) 19.6N/m e) 19.6N/km​

Answers

The spring constant of the spring is 19.6 N/m.

The correct answer is option D.

What is the spring constant of the spring?

The spring constant of the spring is calculated by applying the following equation as shown below.

Mathematically, the formula of Hooke's law is given as;

F = kx

where;

F is the applied forcek is the spring constantx is the extension of the spring

k = F / x

the extension of the spring when the 250 g mass was hung on it is calculated as;

x = 30 cm - 25 cm

x = 5 cm = 0.05 m

The spring constant of the spring is calculated as;

k = ( mg ) / x

where;

m is the additional mass = 250 g - 150 g = 100 g

k = ( 0.1 x 9.8 ) / ( 0.05 )

k = 19.6 N/m

Learn more about spring constant here: https://brainly.com/question/1968517

#SPJ1

A metal sphere as a charge of +2.3 x 10^-6 C and lies 2 meters away from another metal sphere of unknown charge.

If the attractive force present between the spheres is 0.05 N, what is the charge on the second sphere?

Answers

The charge is on the second sphere  9.67×10⁻⁶ C.

What is charge?

Charge is the product of current and time.

To calculate the charge on the second sphere, we use the formula below

Formula:

Q = Fr²/kq.................. Equation 1

Where:

F = Force on both sphereq = Charge on the first sphereQ = Charge on the second spherer = Distance between the spherek = Coloumb's constant

From the question,

Given:

q = 2.3×10⁻⁶ NF = 0.05 Nr = 2 mk =  8.99×10⁹ Nm²/C²

Substitute these values into equation 1

Q = (0.05×2²)/(8.99×10⁹×2.3×10⁻⁶)Q = 9.67×10⁻⁶ C

Hence, the charge is  9.67×10⁻⁶ C.

Learn more about charge here:  https://brainly.com/question/25922783

#SPJ1

What describes the speed of a planet traveling in an elliptical orbit around the sun? a. Constant b. Fastest when closest to the sun c. Slowest when closest to the sun d. Fastest when closest to the moon.

Answers

The speed of a planet traveling in an elliptical orbit around the sun is b. Fastest when closest to the sun.

ABOUT ELLIPTICAL ORBIT

The planets in the solar system revolve around the sun in certain paths called orbits or orbits that are elliptical, not circular.

In ancient times, humans adhered to geocentric understanding. This theory was introduced by the Greek astronomer Claudius Ptolemy in 100-170 AD.

This belief persisted for 1,400 years. According to him, the earth is the center of the solar system. The sun and planets revolve around the earth in a circular path.

Then in 1543, the astronomer Nicolaus Copernicus sparked the Heliocentric model. According to him, the Earth and other planets revolve around the Sun in circular paths. This theory is better than ever. Although, the assumption that the trajectory of a planet's motion is still in the form of a circle.

The planet's orbit is elliptical due to the gravitational interaction between the planet and the sun and other celestial bodies. Johannes Kepler in the 1600s was the first to discuss the shape of planetary orbits.

Learn more about elliptical orbit at

https://brainly.com/question/18283031.

#SPJ4

Answer: B.

fastest when closest to the Sun

Explanation: plato :3

Hope this helps!

A load of unknown ma i place in the rear of an 18-wheeler truck. The truck rear hock are intantly compreed 10. 0cm. Conider the hock acting a pring with a pring contant, k = 50,000N/m. What i the ma of the load the 18-wheeler jut picked up?

Answers

The mass of the load is 50,000N/m multiplied by 10.0cm, which is 500,000N.

Hooke's law states that the force (F) required to extend or compress a spring by some distance (x) scales linearly with respect to that distance—that is, Fs = kx, where k is a constant factor characteristic of the spring (i.e., its stiffness) and x is small in comparison to the total possible deformation of the spring.

B. Using Hooke's law, F = kx, where F is the force of the truck's hock, k is the spring constant, and x is the compression of the hock. Rearranging for mass, m = F/g, where g is the acceleration due to gravity. Thus, m = kx/g, or m = (50,000N/m * 10.0cm)/9.8m/s^2, which yields 500,000N.

For more questions like Hooke's law click the link below:

https://brainly.com/question/29126957

#SPJ4

Which test measures the reaction time of movement?

Answers

Posner reaction time test measures the reaction time of movement.

The Posner cueing task, often known as the Posner reaction time test, evaluates the manual and eye-movement reaction times in response to various signals. Particularly following brain damage, this technique is frequently used to evaluate spatial attention.

An eye-level computer screen is placed in front of the individual during the exam. On the screen, there is a point or cross in the middle with two boxes on either side. A target stimulus, such as a shape, then appears on one of the boxes. The individual presses the keyboard of the computer as soon as the target is identified. The response time is measured precisely in this way.

Learn more about Reaction:

https://brainly.com/question/24795637

A student gives a quick push to a ball at the end of a massless, rigid rod, as shown in the figure, causing the ball to rotate clockwise in a horizontal circle. the rod's pivot is frictionless.

a. As the student is pushing, is the torque about the pivot postive, negative, or zero?

b. After the push has ended, does the ball's angular velocity:

steadily increase, steadily decrease, hold steady, decrease for a while then hold steady, increase for a while then hold steady

c. Right after the push has ended, is the torque positive, negative, or zero?

Answers

The torque about the pivot is positive, after the push has ended the ball's angular velocity will hold steady, right after the push has ended the torque would be zero.

Torque is a measure of force that can rotate an object around a fixed axis. as the ball is moving in the same direction in which the force is applied. So the torque will be positive. After the push has ended the ball will continue to rotate at the constant angular velocity, as the pivot is frictionless, so no opposing force will decrease the angular velocity of the ball. So the ball's angular velocity will hold steady.

After the push has ended, the torque will be zero. Torque is defined as follows:

Torque = force × distance from the rotation axis

The pushing force is zero so the torque will also be zero.

To know more about torque, here

https://brainly.com/question/19247046

#SPJ4

A train moves from rest to a speed of 25 m/s in 30.0 seconds. What is the magnitude of it's acceleration?

Answers

The train accelerates to 25 m/s from rest in 30 seconds. Search for: The train's acceleration. The train accelerates at 0.83 m/s2 after 30 seconds.

How do you determine acceleration?

According to the equations a = v/t, acceleration (a) seems to be the product of the variation in velocity (v) and the changes in time (t).

What is the most basic meaning of acceleration?

Acceleration is the term for the rate of change in speed. In most cases, but not always, acceleration denotes a shift in speed. The object keeps accelerating because the direction of its velocity is changing even while it travels in a circular motion.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ1

Which type of weathering is most evident in the image below?
A. Abrasion
B. Breaking apart by plants.
C. Cracks from temperature changes
D. Ice wedging

Answers

Answer:

B

Explanation:

the roots are dig deep into small cracks and crevices, and as they grow they pry the rock apart. look close and you will see the roots of the tree.

Convert 3600 s to hr

show all work please and thank you! (SHOW ALL WORK) thanks<3 ill give brainlist

Answers

To convert time to hours from seconds, you have to divide the total seconds by 3600.

[tex]\dfrac{3600}{3600} =\texttt{1 hour}[/tex]

3600 seconds would be 1 hour.

1 minute/60 minutes = 60seconds/X
(1minutes)(X) = (60 seconds *60 minutes)
Solve for X
X= 3600/1
X= 3600 seconds

Convert 250 N to lb show all work please thank you

Answers

Convert 250 Newtons to Pounds-Force

250 Newtons (N)

1 N = 0.224809 lbf

=

56.2022 Pounds-Force (lbf)

1 lbf = 4.44822 N

The free-fall acceleration at the surface of planet 1 is 16 m/s2. The radius and the mass of planet 2 are twice those of planet 1.

Answers

The free-fall acceleration at the surface of planet 2 is g = 8 m/s². The result is obtained by comparing the accelerations due to gravity on planet 1 and planet 2.

What is the formula of free-fall acceleration?

The free-fall acceleration can be counted by the following formula.

g = GM/R²

Where

g = acceleration due to gravity (free-fall acceleration)G = universal gravitational constantM = mass of an objectR = distance from the center of mass of object.

Planet 1 has the free-fall acceleration at its surface of 16 m/s². Planet 2 has the radius and the mass twice those of planet 1.

Find the free-fall acceleration at the surface of planet 2!

If g, M, and R are the parameters of planet 1, let's say g', m, and r are the parameters of planet 2. So,

m = 2Mr = 2R

The acceleration due to gravity on planet 2 is

g/g' = (GM/R²)/(Gm/r²)

g/g' = (M/R²)/(m/r²)

g/g' = Mr²/mR²

g/g' = M(2R)²/(2M)R²

g/g' = 4MR²/2MR²

16/g' = 2/1

g' = 16/2

g' = 8 m/s²

Hence, the acceleration due to gravity on planet 2 is 8 m/s².

Learn more about acceleration due to gravity here:

brainly.com/question/21775164

#SPJ4

67. Resultant Force Forces with magnitudes of
85 pounds and 50 pounds act on a single point at angles
of 45° and 60°, respectively, with the positive x-axis.
Find the direction and magnitude of the resultant of these
forces.
Copyright 2018 Cengage Learning. All Rights Reserved. May not be copied, s

Answers

50.545 degrees with a positive x-axis and a weight of 133.909 pounds. the direction and strength of these forces' combined effect

What level of significance is there?

A modest but significant amount of a certain characteristic is present in anything if it has a degree of that attribute. However, their salaries do provide them some freedom. There is some cause for cautious optimism.

What does Celsius mean?

Degree (Celsius) (Celsius) Temperature readings are frequently made in degrees Celsius. Degrees Celsius are denoted by the sign °C. By designating 0°C as the freezing point of water and 100°C as its boiling point, the Celsius scale is produced.

To know more about degree visit:

https://brainly.com/question/364572

#SPJ1

Please help chemistry, I'm stuck
9 mol P4010 forms 36 mol H3PO4, while
51 moles H2O form 34 moles H3PO4.
How many moles of H3PO4 form during
the reaction?
? ] mol H3PO4
Round your answer to the ones place.

Answers

Answer:

???

Explanation:

Not sure to which reaction the question refers

 but here is the simplest balanced equation

    P4 O10     +  6  H2 O ======>  4  H3 PO4  

So the answer may be   4 moles

If the reaction is using 9 moles of PO4   and 51 Moles of H2O

  the H2O will limit the number of moles of H3PO4 produced to 34 moles      this may be the answer the Q is looking for....H2O is the limiting reagent

The number of moles of H3PO4 form during the reaction is 4.

What is meant by limiting reagent ?

Limiting reagent of a reaction is defined as the reactant that is being completely used up in the reaction.

Here,

Given that,

The number of moles of P₄O₁₀ = 9

The number of moles of H₂O = 51

If 9 moles of P₄O₁₀ can form 36 moles of H₃PO₄, 1 mole of P₄O₁₀ can form 36/9 = 4 moles of H₃PO₄

The balanced equation for the reaction can be written as,

P₄O₁₀ + 6H₂O ⇒ 4H₃PO₄

From the equation, we can say that 1 mole of P₄O₁₀ and 6 moles of H₂O will form 4 moles of H₃PO₄

H₂O is the limiting reagent of this reaction.

Hence,

The number of moles of H3PO4 form during the reaction is 4.

To learn more about limiting reagent, click:

https://brainly.com/question/26905271

#SPJ2

Help me out here please

Answers

The displacement is calculated to be a magnitude of 2,691.33 in a direction of 5.32.

What does physics mean by displacement?

The term "displacement" refers to a shift in an object's location. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place.

What distinguishes distance from displacement?

Distance is the length of any path connecting any two places. When measured along the shortest path between any two places, displacement is the direct distance between them.

To know more about Displacement visit:

https://brainly.com/question/321442

#SPJ1

If I see the star Sirius in the constellation of Canis Major rise at 8 pm tonight, what time will it rise one week from now

Answers

Viewed from the same place, it will lag by about 4 minutes per day.

7 days later puts it at roughly 8:28 PM.

A weight suspended from a spring is seen to bob up and down over a distance of 28 cm twice each second. Find the frequency.

Answers

Since frequency is the reciprocal of period, the frequency of the spring is 2 Hz

What is Frequency ?

Frequency can be defined as the number of complete revolution per second made by a vibrating body.

Given that a weight suspended from a spring is seen to bob up and down over a distance of 28 cm twice each second.

This means that its Period T = t/n

Where

t = time taken = 1 sn = number of oscillations = 2

T = 1/2 = 0.5 s

Frequency is an inverse of period. That is,

F = 1/T

F = 1/0.5

F = 2 Hz

Therefore, the frequency of the spring is 2 Hz

Learn more about Frequency here: https://brainly.com/question/27151918

#SPJ1

Sonography captures images by using

the speed of a sound and wave reflection
the reflection and refraction of the sound wave
the distance between the receiver and the wave intensity
the wave intensity and sound speed

Answers

Sonography captures images by using the reflection and refraction of the sound wave.

The correctoption is B

What is Sonography?

Sonography is described as a diagnostic medical test that uses high-frequency sound waves, or ultrasound waves, to create images of tissues, glands,  organs, and blood or fluid flow within the body.

Sonography uses a device called a transducer on the surface of the skin to send ultrasound waves and listen for an echo.

The difference between sonography and ultrasound is that an ultrasound is a tool used to take a picture while a  sonogram is the picture that the ultrasound generates.

In conclusion, sonography is the use of an ultrasound tool for diagnostic purposes.

Learn more about sonography at: https://brainly.com/question/2681483

#SPJ1

Answer:

Sonography captures images by using the reflection and refraction of the sound wave,

Or B.

Hope this helps!

Which is the best way to compare speed and velocity?

A. Slowing down versus speeding up

B. Distance over time vs distance over time and direction

C. Big vs small

D. One is the hunter and one is the prey

Please help as soon ASAP!

Answers

i think the answer is b

Sound waves are examples of

longitudinal waves
transverse waves
electromagnetic waves
tension waves

Answers

A is the correct answer, sound waves are longitudinal waved meaning that the waved propagate by compression PLEASE MARK BRAINLIEST

Answer:

Sound waves are examples of A. or longitudinal waves

The maximum force that can be put on an egg without breaking it has been determined to be 15 N. If the 0.15 kg egg is moving at 10.0 m/s and needs to be brought to a stop. How much time will need to be allowed for it to slow down?

Answers

The time it takes to put the egg to rest is 0.1 seconds

What is time?

Time is the continued sequence of existence and events that occurs in an apparently irreversible succession from the past, through the present.

To calculate the time it will takes to put the egg to rest, we use the below.

Formula:

t = m(v-u)/F.................... Equation 1

Where:

t = Timem = Massv = Final  Velocityu = Initial velocityF = Force

From the question,

Given:

m = 0.15 kgF = -15 N (Against the direction of motion)u = 10 m/sv = 0 m/s (To rest)

Substitute these values into equation 1

t = 0.15(0-10)/-15t = -1.5/-15t = 0.1 seconds

Hence, the time is 0.1 seconds

Learn more about time here: https://brainly.com/question/26046491

#SPJ1

Will knows that the gravitational pull of mars is less than the gravitational pull of earth. When he lands on mars, his mass will be 75 kilograms. His weight on mars will be his weight on earth.

Answers

Weight of will in mars would be 85N. When he lands on Mars, his mass will be equal to 75 kilograms. His weight on Mars will be less than his weight on Earth.

Would you weigh more or less if you stood on Mars's surface instead of Earth's?

Even though the individual would be made out of the same quantity of material, they would only weigh 38% as much as they would on Earth. This is because Mars has less gravitational pull than Earth.

gravitational pull on the surface of Mars = 3.8.

weight on the mars = 75 x 3.8 = 85N.

What creates the attraction of gravity?

All objects with mass, including our Earth, really bend and curve spacetime, which is what causes gravity to pull you toward the ground. What you experience as gravity is that curvature. All items on Earth are drawn "downward" by gravity toward the planet's core. The gravitational attraction between two bodies is stronger when their masses are bigger, according to Sir Isaac Newton's Universal Law of Gravitation.

 

Lear more about gravitational pull here:

brainly.com/question/13467280

#SPJ4

Will is a scientist. He’s designing a spacecraft that would allow people to land on Mars. Will’s mass on Earth is 75 kilograms. Will knows that the gravitational pull of Mars is less than the gravitational pull of Earth. When he lands on Mars, his mass will be (Less than, Equal to or More than) 75 kilograms. His weight on Mars will be (less than, Equal to, or more than) his weight on Earth.

One of the main forces driving plate tectonics is the dissipation of heat from the mantle, through convection or large scale upwelling and doming. Where does this heat come from?.

Answers

The dissipation of heat emanating from of the mantle, through convective or large-scale upwelling and doming, is one of the main mechanisms driving plate tectonics. The Earth's mantle and core contain numerous gases that react to form magma and lava as well as heat.

What is heat dissipation?

The procedure by which heat is moved from it's own source to the surroundings, as in the example of the earth layer to the higher layer of the earth above, is known as heat dissipation. There are three possible mechanisms for heat dissipation: conduction, radiation, and convection.

To know more about dissipation of heat do visit:

https://brainly.com/question/15331125

#SPJ4

Other Questions
Which of the following arranges the bonds in order of decreasing bond length? A regulator _________ is the part that connects to your scuba cylinder and a regulator _________ is the part you place in your mouth and use to breath. A group of Lieder unified by a narrative thread or by a descriptive or expressive theme is called a(n) Group of answer choices Can someone help me please give reason : the root of the chilli is tap root OA=What Is OA=Help me please!!! Thanksss Given AB=10cm, CD=11cm, and AD=39cm, find the length of BC what do boisterous mean Some examples of indirect effects that could affect incremental cash flows would be? Help me out nowQUICKLYTHX Far in space, where gravity is negligible, a 465 kg rocket traveling at 75.0 m/s in the positive x-direction fires its engines. The figure (Figure 1)shows the thrust force as a function of time. The mass lost by the rocket during these 30.0 s is negligible. EXTRA POINTS HELP ASAP!x + x/3 = 4/9solve for x The water pressure on Mustafa as he dives is increasing at a rate of 0.9920.9920, point, 992 atmospheres (\text{atm})(atm)left parenthesis, start text, a, t, m, end text, right parenthesis per meter (\text{m})(m)left parenthesis, start text, m, end text, right parenthesis . What is the rate of increase in water pressure in atm/km (b) What are the differences between reproduction in Rhizopus and in maize. 1.How will understanding the use of rhetorical devices help you in the future as youencounter political speeches, advertisements, and other forms of persuasion in yourdaily life 1. Based on the circularangle below. What is thebest measurementthe angle?fora. less than 90b. more than 90C. more than 180d. less than 60 A male stickleback fish attacks other male stickleback fish to protect his property. However, he also attacks models of fish that have a similar red-colored belly. This is an example o In 35 complete sentences, explain how the author develops the theme of your Module One short story. You can discuss how the author uses characters, conflict, events, or the setting to develop the theme; discuss only the elements that apply. Provide at least two examples from the text to show how the author develops the theme of your selected short story. please help my story is condensed milk Find all primes p, q such that p^2-p=37q^2-q A writ of habeas corpus declares that?