Organic molecules (amino acids) needed to be concentrated to stimulate reactions to form protein concentration mechanisms that do not include Boiling.
Amino acids are natural compounds composed particularly of nitrogen, carbon, hydrogen, and oxygen. Your body desires 20 awesome amino acids to grow and function. amino acid, any of a group of organic molecules that consist of a basic amino group (―NH2), an acidic carboxyl group (―COOH).
fruits have an excessive content of amino acid that allows modify insulin degrees. fruits like bananas, apples, berries, and so forth., are rich resources of amino acids.
learn more about amino acid here
https://brainly.com/question/2526971
#SPJ1
If I have 3.7 moles of MgSO4 and 4.8 moles of NH3 which one is the limiting reactant?
Answer:
To determine the limiting reactant, you need to compare the amount of each reactant with the amount required to react completely with the other reactant. The reactant that runs out first is the limiting reactant.
In this case, the balanced equation for the reaction between MgSO4 and NH3 is:
MgSO4 + 2 NH3 → Mg(NH2)2SO4
From the balanced equation, we can see that 1 mole of MgSO4 reacts with 2 moles of NH3. Therefore, 3.7 moles of MgSO4 will react with (3.7 moles)(2 moles NH3/1 mole MgSO4) = 7.4 moles of NH3.
4.8 moles of NH3 is less than 7.4 moles, so NH3 is the limiting reactant.
Uday Tahlan
Find the amount of negative charge in one mole of oxygen gas, O2.
Since there are 6.022 1023 molecules in 1 mole of oxygen (O2), it has a mass of 32 grams.
One mole of oxygen gas is equal to how many molecules of oxygen gas?One mole of oxygen gas, with the formula O2, weighs 32 g and includes 6.02 x 1023 molecules of oxygen, but also contains 12.04 x 1023 (2 x 6.02 x 1023) atoms of oxygen, since each molecule of oxygen contains two oxygen atoms.Since there are 6.022 1023 molecules in 1 mole of oxygen (O2), it has a mass of 32 grams.One mole of oxygen weighs 15.998 grams, whereas one mole of hydrogen weighs 1.008 grams.Since there are 6.022 1023 molecules in 1 mole of oxygen (O2), it has a mass of 32 grams.To learn more about oxygen refer to:
https://brainly.com/question/26073928
#SPJ4
The amount of negative charge in one mole of oxygen gas, [tex]O_{2}[/tex] is 9.647 x [tex]10^{14}[/tex] coulomb.
One mole of oxygen gas is equal to how many molecules of oxygen gas?One mole of oxygen gas, with the formula O2, weighs 32 g and includes 6.02 x [tex]10^{23}[/tex] molecules of oxygen, but also contains 12.04 x [tex]10^{23}[/tex] (2 x 6.02 x [tex]10^{23}[/tex]) atoms of oxygen, since each molecule of oxygen contains two oxygen atoms.
Since there are 6.022 1023 molecules in 1 mole of oxygen ([tex]O_{2}[/tex]), it has a mass of 32 grams. One mole of oxygen weighs 15.998 grams, whereas one mole of hydrogen weighs 1.008 grams. Since there are 6.022 1023 molecules in 1 mole of oxygen ([tex]O_{2}[/tex]), it has a mass of 32 grams.
Determination of negative charge:Mass of 1 mole of electrons:
9.10 x [tex]10^{13}[/tex] × 6.023× [tex]10^{23}[/tex] 5.486× [tex]10^{-7}[/tex] kg
Charge of 1 mole of electrons:
1.602× [tex]10^{-19}[/tex] × 6.023× [tex]10^{23}[/tex] = 9.647× [tex]10^{4}[/tex] coulomb
To learn more about oxygen refer to:
brainly.com/question/26073928
#SPJ4
2 Al + 3CuCl₂ --> 2 AlCl3 + 3 Cu
How many grams of Cu is produced when you start with 5.5 g of Al?
Remember to round all molar masses to whole numbers. (round to the tenths place)
Involves the reduction of one molecule CuI+e to Cu and the oxidation of another CuI to CuII+e. A different illustration of a disproportionation reaction is the interaction of halogens with hydroxide ions, such as Cl2(g)+2OH(aq) Cl(aq)+ClO(aq)+H2O(l).
What is the grams of Al?One mole of aluminium weighs 26.982 g, which may be found on the periodic table to determine the atomic mass and the number of grammes per mole.
The chemical name for aluminium is Al. 26.98 g/mol is the molar mass. The elemental form of metallic aluminium is present (the most fundamental form is the elemental form, which is expressed in the periodic table). We can use the formula 2(n2) because the atomic number of aluminium is 13.
Reaction to displacement This reaction is a synthesis since it involves the combination of two reactants (Al and O2) to produce a single product, Al2O3. Utilize all of the digits associated with the atomic weights as listed on their periodic table. Use the resulting molar mass after adding them all up. Avoid rounding the molar mass.
To learn more about molecule refer to:
https://brainly.com/question/19922822
#SPJ1
The air pressure at the top of Mount
Everest is about 199 mm Hg.
What is the pressure on Everest in
atmospheres?
[?] atm
The air pressure at the top of Mount Everest in atmospheres is equal to 0.2618 atm.
What is pressure?In Science, pressure can be defined as a measure of the force exerted per unit area of an object or physical body. This ultimately implies that, pressure is usually measured in Newton per meter square and calculated by using this formula:
P = F/A
Where:
P represents the pressure.F represents the force.A represents the area.Generally speaking, air pressure can be measured in other units such as the following:
PascalAtmosphereMillimeters of mercury (mm Hg).In order to convert the value of pressure in millimeters of mercury (mm Hg) to atmosphere, we would divide by 760 as follows:
Air pressure = 199/760
Air pressure = 0.2618 atm.
Read more on pressure here: brainly.com/question/10013312
#SPJ1
Answer: 0.261842
Explanation:
Potential energy stored in the bonds of a molecule is also called: __________
Potential Energy stored in bond of molecules is called chemical energy.
Define Potential Energy?Potential energy in physics is the energy that an item retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.A potential in physics can either be a scalar potential or a vector potential. It is a field that is defined in space in either instance, and it may be used to deduce a lot of significant physical features.Potential energy is the energy that an object accumulates because of its position, enabling it to perform more work.An extended rubber band, for instance, is full of potential energy. Similar to this, a ball will have more potential energy when released above the ground than when it falls.To learn more about Potential Energy refer to:
https://brainly.com/question/14427111
#SPJ4
The absolute configuration of any amino acid is shown by pointing H at the rear, R group in the right direction, -COOH group at the left direction, and NH3 groups would be pointing upwards.
The absolute configuration of any of the amino acid is :
H H
| |
HOOC - C - NH₂ H₂N - C - COOH
| |
CH₃ CH₃
The configuration of the amino acid is indicated by the pointing H at the rear, the R group is in the right direction , The COOH group is in the left direction and the NH₃ group in the upward direction.
H H
| |
HOOC - C - NH₂ H₂N - C - COOH
| |
CH₃ CH₃
D - amino acid L - amino acid
The proteins which are naturally obtained are consist of the L - amino acid. The L - of the amino acid are the one that found in the nature easily.
To learn more about amino acid here
https://brainly.com/question/29269947
#SPJ4
what is the half-life of sodium-25 if 1.00 gram of a 16.00-gram sample of sodium-25 remains unchanged after 237 seconds?
The half-life of sodium-25 is 237 seconds.
The half-life of a radioactive substance is the amount of time it takes for half of the initial amount of the substance to decay. In this case, 1.00 gram of a 16.00-gram sample of sodium-25 remains unchanged after 237 seconds, which means that half of the initial sample has decayed in that amount of time.
Therefore, the half-life of sodium-25 is 237 seconds. It's worth mentioning that the half-life of radioactive isotopes can vary depending on the element and the specific isotope. Also, the half-life of a radioactive element is an important factor in the safe handling and disposal of nuclear waste, because it determines how long the radioactive material remains dangerous.
To learn more about half-life visit: https://brainly.com/question/12341489
#SPJ4
A 1. 80 m libr solution in acetonitrile, ch3cn, has a density of 0. 826 g/ml. What is the mole fraction of libr? (form. Wts. : libr = 86. 85, ch3cn = 41. 05).
The mole fraction of LiBr is 0.8946
Calculations for LiBr's mole fraction are as follows:We are aware that the mole fraction or molar fraction is defined as the amount of a constituent (expressed in moles), ni, divided by the total amount of all the elements in the mixture (also indicated in moles, ntotal).
mole fraction = n/n overall
first we should calculate hw many gram the solution from the density
assume the volume is 1 L
so.
density = mass solution/ volume solvent
0.826 g/ml = mass/ 100mL
mass= 82.6 g
so the mole of the solution is
mole = mass/ mass molar
mole solution = 82.6 g / 41.05g/ mole = 2.012 mole
Then we can find the mole of LiBr from the concentration
molar= moles x volume
1.8 M = moles x 1 L
moles LiBr = 1.8 moles
thus,
mole fraction = n/ n total
mole fraction = 1.8/ 2.012 = 0.8946
Learn more about mole fraction at brainly.com/question/29808190
#SPJ4
The percentages of propane and butane in LPG fuel change at different times of the year. In the winter, LPG fuel contains a higher percentage of propane. In the summer, LPG fuel contains a higher percentage of butane. Suggest why fuel suppliers change the composition.
The lower boiling point of propane makes it better in winter compared to butane.
What is LPG?The term LPG stands for liquified petroleum gases. It is one of the kinds of the gases that we can be able to use as fuel. We have to know that the gases that are used as fuel are the gases that are able to burn very well as this is key in the use of the fuel.
In the winter, we would need to use a gas that has a much lower boiling point and this is why in this case, the propane would be found to be better than butane due to its lower boiling point.
Learn more about LPG:https://brainly.com/question/22425958
#SPJ1
Identify the conjugate acid for each base.
conjugate acid of H2PO−4 :
inconjugate acid of SO2−4 :
conjugate acid of NH3 :
the conjugate acid for each base is conjugate acid of H2PO−4 : HPO4^2-, conjugate acid of SO2−4 : HSO4-, conjugate acid of NH3 : NH4+
A conjugate acid-base pair is a pair of substances that differ by only a proton. An acid is a substance that donates a proton (H+) in a chemical reaction, while a base is a substance that accepts a proton. When an acid loses a proton, it becomes its conjugate base, and when a base gains a proton, it becomes its conjugate acid.For example, the conjugate acid of the base NH3 is NH4+ and the conjugate acid of the base H2O is H3O+. The conjugate acid and the base are in equilibrium with each other, and the acidity constant (pKb) of the base is related to the basicity constant (pKa) of the conjugate acid. In acid-base reactions, the acid donates a proton to form its conjugate base, and the base accepts a proton to form its conjugate acid.
Learn more about acid-base pair here:
https://brainly.com/question/15579188
#SPJ4
What type of reaction is represented by the following equation:
Mg(ClO3)2(s) --> MgCl2(s) + 3 O2(g)
A. single replacement
B. synthesis
C. decomposition
D. combustion
I need help with this question.
When pipes leak, the environment's air, water, soil, and climate might be harmed. When there is a lot of rain and flooding, pipes that span rivers and streams are more likely to burst.
What are the advantages and disadvantages of drilling?Acid rain, deteriorating water quality, groundwater contamination, and the greenhouse effect's intensification are only a few significant environmental effects. Aside from destroying ecosystems that, in some cases, may be unique, the oil and gas industry may also be a factor in the decline of biodiversity. Drilling and milling machines have both advantages and drawbacks.
Benefits: accurate points, good feed control, and challenging to roll. Retraction's shortcomings include its lack of flexibility and inability to process large or deep holes. Furthermore, methane, a greenhouse gas 21 times more potent than carbon dioxide, is released in enormous quantities by the oil and gas sector. In total, the industry is to blame for 3.8% of all greenhouse gases, or 38% of all methane emissions in the United States.
To lean more about drilling refer to :
https://brainly.com/question/29617181
#SPJ1
Indicate whether each of the following compounds will gave an acidic, basic or neutral solution when dissolved in water.
ammonium nitrate
barium hypochlorite barium nitrate
potassium nitrite
The pH will be less than 7.
The pH wil be approximately equal to 7
The pH will be greater than 7
When a solution is acidic, its pH will vary from 0 to 6.9. The pH of a basic solution may range from 7.1 to 14. When a solution is neutral, its pH will be 7.
What is an example of a solution?A solution is a uniform mixture made up of two or more elements that have particles smaller than one nanometer. There are many different types of solutions, such as soda water, salt-and-sugar solutions, and others. A solution looks to have one phase for each component.
What does the word "solution" signify in its perfect form?A solution in chemistry is a mixture of several substances in quantities that can be adjusted up to
To know more about solution visit:
https://brainly.com/question/15567577
#SPJ4
A set of chemistry exam scores are normally distributed with a mean of 70 7070 points and a standard deviation of 5 55 points. What proportion of exam scores are between 68 6868 and 73 7373 points?.
The proportion of exams scores between 68 and 73 points is 38.09%.
We must first determine the z-score for both points.
The z-score formula is:
Z-score is equal to (x-mean)/SD.
Given that in this instance:
Mean = 70
SD = 5
So, for a 68-point exam grade:
(68 - 70) / 5 is the z-score.
= –2 / 5
= –0.4
And for a 73 point exam grade:
(73 - 70) / 5 is the z-score.
= 3 / 5
= 0.6
Thus, the likelihood:
P (68 < x < 73) = P (–0.4 < z < 0.6)
Through the z-table:
P (–0.4 < z < 0.6)
= (0.5 – 0.3446) + (0.7258 – 0.5) (0.7258 – 0.5)
= 0.3809
= 38.09%
As a result, 38.09% of exam scores fall between 68 and 73 points.
Learn more about z-score at: brainly.com/question/15016913
#SPJ4
During a solar eclipse, it suddenly gets dark for a few moments, even though it is day
time. This is because
O You are under the umbra
O You are under the penumbra
O The moon is in the new moon phase
O The sun is in it's darkened phase
Answer:
The sun is it's darkened phase
How can the driver of a car change the rate of accelera- tion? List as many ways as you can.
By changing gear and according to the brakes applied to the car.
What is acceleration?Acceleration is the rate of change of the velocity of an object with respect to time.
There are three types of accelerated motions such as :
Uniform accelerationNon-uniform accelerationAverage accelerationTherefore, In a car you could accelerate by hitting the gas or the brakes either of which would cause a change in speed. But you could also use the steering wheel to turn which would change your direction of motion. The car moves faster and faster, speed is the rate of change of position while acceleration is the rate of change of velocity.
Learn more about acceleration here: brainly.com/question/605631
#SPJ1
HELP ME PLEASE ASAP I NEED HELP WITH QUESTION 1.2
The section of the periodic table in Figure 1 that is most likely to contain element R is section A.
What is the explanation about above answer?Based on the information you provided, element Q is a dull solid with a melting point of 44 °C and does not conduct electricity. These properties suggest that element Q is likely a non-metal. Therefore, the section of the periodic table in Figure 1 that is most likely to contain element Q is section B. This is because non-metals have a low melting and boiling point and they are poor conductors of electricity.Regarding element R, the information provided is its formula R2+ and R3+. These formulas suggest that element R is likely a metal and has a positive charge. Therefore, the section of the periodic table in Figure 1 that is most likely to contain element R is section A. This is because most of the elements in section A are metals and they have positive charges. Since the given information is not enough to determine the position of the element R precisely, however, it's likely that section A is the most probable one.To learn more about conductor refer:
brainly.in/question/15510573
#SPJ1
what mass of CO2 will be produced from the reaction of 37.5 g c2h6?
The mass of carbondioxide that will be produced from the reaction of 37.5g of C₂H₆ is 110 grams.
How to calculate moles using stoichiometry?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, ethane reacts with oxygen to produce carbondioxide and water as follows:
2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O
Based on the above reaction, 2 moles of ethane produces 4 moles of carbondioxide
37.5g of ethane = 1.25moles of ethane
moles of carbondioxide = (1.25 × 4) ÷ 2 = 2.5 moles
mass of carbondioxide = 2.5mol × 44g/mol = 110grams of carbondioxide.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
Mario tudied how far room temperature water would purt out of a platic milk carton when 3mm hole were punched at different height from the bottom of the container
The independent variable here is the distance water traveled out of the carton.
The factors of the subject or the things that have an impact on the experiment are known as the variables of an experiment. Three different sorts of variables exist. These variables are control, independent, and dependent.
Independent variables are ones that are not under the experimenter's direct control. The experimenter can alter or regulate the dependent variables. Control variables are those that don't change or are constrained during the experiment.
The carbon's journey distance is the dependent variable in this situation when Mario studied how far room temperature water would spurt out of a plastic milk carton when 3mm holes were punched at different heights from the bottom of the container.
To learn more about variables in an experiment, click at:
brainly.com/question/3210387
#SPJ4
3. A 170.00 g sample of an unidentified compound contains 29.84 g sodium, 39.7 g chromium, and 72.67 g oxygen. What is the compound's empirical formula?
The resulting empirical formula is Na2CrO4.
What is empirical formula?The empirical formula of a compound is the simplest whole-number ratio of the elements it contains. To calculate the empirical formula, we must first determine the molar ratio of the elements by dividing their masses by their respective molar masses.
For sodium, the molar mass is 22.99 g/mol. Therefore, the molar ratio of sodium is 29.84 g / 22.99 g/mol = 1.30 mol.
For chromium, the molar mass is 51.99 g/mol. Therefore, the molar ratio of chromium is 39.7 g / 51.99 g/mol = 0.76 mol.
For oxygen, the molar mass is 16.00 g/mol. Therefore, the molar ratio of oxygen is 72.67 g / 16.00 g/mol = 4.54 mol.
To get the empirical formula, we must divide each of the molar ratios by the smallest molar ratio, which in this case is 0.76 (for chromium). The resulting empirical formula is Na2CrO4.
To learn more about empirical formula
https://brainly.com/question/1603500
#SPJ1
How can we reduce H2O steam being produced?
Situation: Pollutants from burning fossil fuels
Fossil fuels may cause water pollution because they release toxicants into the atmosphere, which is formed by air and water.
What is the relationship between fossil fuels and water pollution?The relationship between fossil fuels and water pollution is based on the fact that fossil fuels are burned to release energy which may generate contamination that affects water into the atmosphere.
Therefore, with this data, we can see that the relationship between fossil fuels and water pollution is based on the release of toxic substances and greenhouse gases during this process that affects water in the atmosphere.
Learn more about water pollution here:
https://brainly.com/question/1235358
#SPJ1
What is an ionic bond Mcq?
Ionic bonds, also known as electrovalent bonds, are a type of linkage created in a chemical molecule by the electrostatic attraction of ions with opposing charges.
When the valence electrons of one atom are permanently transferred to another atom, a bond of this kind is created. If an atom receives electrons, it becomes a charged ion, but if it loses them, it becomes a positively charged ion.
Ionic or electrovalent compounds are produced via ionic bonding, and the compounds generated between nonmetals and alkali and alkaline-earth metals serve as the best examples of this type of compound.
Want to know more about ionic bonds visit the link which is given below;
https://brainly.com/question/11527546
#SPJ4
Which has a free radical? ClO3- ; NO ; NO2- ; NO2 ?
NO and NO₂ are the free radicals.
The species which is having unpaired as well as odd number of electrons will be considered as a free radical. If the number comes out to be odd, the concerned species will be considered as a free radical. In case of NO₂, the total number of electrons is 23 (7 from nitrogen and 16 from two oxygen atoms) and in case of NO the total number of electrons is 15 (7 from nitrogen and 8 from oxygen). Hence, the species are free radical.
Whereas, in case of [tex]ClO3^{-}[/tex], the total number of electrons is 42 (17 from chlorine and 24 from three oxygen and +1 for negative charge) and in case of [tex]NO2^{-}[/tex]the total number of electrons is 24 (7 from nitrogen and 16 from oxygen and +1 for negative charge) There are even no. of electrons. Hence the [tex]ClO3^{-}[/tex] and [tex]NO2^{-}[/tex] are not a free radical.
To know more about free radicals here
https://brainly.com/question/29422803
#SPJ4
Draw the best Lewis structure for
CH3CH(CH3)CH2C(CH2CH3)2CHO, a neutral molecule.
HELP PLEASE
the best Lewis structure for CH3CH(CH3)CH2C(CH2CH3)2CHO, a neutral molecule has been shown in the image
A Lewis Structure is a very simple example of a molecule's valence shell electrons. It is used to depict how electrons in a molecule are set up around individual atoms. Gilbert N. Lewis, who introduced the Lewis structure in his 1916 article The Atom and the Molecule, was decided to name after it. Lewis structures broaden on the electron dot diagram notion by trying to add routes among atoms to portray shared pairs in a chemical bond. The Lewis Symbol is generated by putting dots chosen to represent electrons in the external energy around the element symbol.
Learn more about Lewis Structure here:
https://brainly.com/question/12476602
#SPJ4
2Ca3(PO4)2+6SiO2+10C-> 6CaSiO3+P4+10CO
Refer to the information above. If you use .57 mol of Ca3(PO4)2 and an excess of silicon dioxide and carbon, how many moles of phosphorus will be produced?
Calcium phosphate can be converted into phosphorus using the following reaction: 6CaSiO3-(aq) + 2Ca3(PO4)2(s) = 6SiO2(s) + 10C(s).
With 114.95 g of phosphorus, how many molecules of phosphorus are there?Thus, the amount of moles for phosphorus is equal to the quantity of phosphorous divided by its molar mass. Now divide the molarity of phosphorus, which is 31 g each mole and weighs 114.95 g. Graham and this crime should cancel each other out. And after solving, 3.71 malls result.
How many moles of the formula are produced?You need to know the product's mass and its molarity (h t), which corresponds to the mass with one mole of the product, in order to determine the moles of the a substance.
TO KNOW MORE ABOUT MOLARITY VISIT:
https://brainly.com/question/8732513
SPJ1
Define acid and what is the highest pH
Answer:
A substance with particular chemical properties including turning litmus red, neutralizing alkalis, and dissolving some metals; typically, a corrosive or sour-tasting liquid of this kind. Often contrasted with alkali and base.
The highest pH is 1
Hope this helps:)
How many oxygen atoms are there in 5.00 moles of MgSO4?
There are 112 oxygen atoms in 5.00 moles of MgSO4. This is because MgSO4 is composed of 1 mole of magnesium (Mg), 1 mole of sulfur (S), and 4 moles of oxygen (O).
What is composed?
Composed is a term used to describe the process of creating something, usually through artistic means. It can be used to refer to writing a song, painting a picture, or composing a poem. It can also refer to the creation of a musical composition or arrangement, either by an individual or as part of a team.
Therefore, if there are 5.00 moles of MgSO4, there would be 4 x 5.00 = 20 moles of oxygen, and since there are 6.02 x 10^23 atoms per mole, there would be 20 x 6.02 x 10^23 = 1.204 x 10^25 oxygen atoms.
Composed can also refer to the arrangement of elements in a piece of art or design, or the overall structure of a work. In some cases, the term may be used to refer to the creative process of planning and assembling a work, such as a book, movie, or painting.
To learn more about composed.
https://brainly.com/question/2246399
#SPJ1
Complete this table for H2O: T. C P. kPa u, kJ/kg Phase description . 400 1450 220 Saturated vapor 190 2500 . 4000 3040
Complete this table for the H₂O :
a. T=143.61 °C , saturated mixture
b. p = 2319.6 kpa . u, kJ/kg = 2601.30
c. u, kJ/kg = 806.00, compressed liquid
d. T = 450 °C , superheated vapor
The complete table for the H₂O is as :
T [°C] p [kpa] u [kJ/kg] phase description
143.61 400 1450 Saturated mixture
220 2319.6 2601.30 Saturated vapor
190 2500 806.00 Compressed liquid
450 4000 3040 Superheated vapor
The compressed liquid is also called as a sub cool liquid, that means the substance that not about to vaporized. The super heated vapor is. the steam at the temperature higher than the vaporization point at absolute pressure.
To learn more about phase description here
https://brainly.com/question/30088344
#SPJ4
The molar mass of cu is 63. 5 g/mol. The molar mass of ag is 107. 9 g/mol. What mass, in grams, of ag is produced from a reaction of 31. 75 g of cu? 26. 95 grams 107. 9 grams 215. 91 grams 431. 82 grams.
The correct answer is 107.9 g of Ag is produced from a reaction of 31. 75 gram of Copper.
How to calculate The Molar Mass?Molar mass of a substance is the mass in grams of one mole of the compound. A mole is the measurement of the number of things, such as atoms, molecules, and ions, that are present in a substance. Any material has 6.022 x 1023 molecules in a mole, it is known as Avogadro's number . The mole is used to determine the size of the tiniest entities quantitatively, just as we use a standard value to quantify many things, such as 1 dozen = 12 items.
Formula - Molar mass = mass in grams/mole = g/mol
Molar mass of a substance can be calculated as:
Given,
n = W/M, where
W = required mass
M= molar mas
Given chemical reaction is:
Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag
From the stoichiometry of the reaction,
1 mole of Cu = produce 2 moles of Ag
Given mass of Cu = 31.75g
Molar mass of Cu = 63.5g/mol
Moles of Cu = 31.75g / 63.5g/mol = 0.5 moles
0.5 moles of Cu = produce 2×0.5 = 1 mole of Ag
Molar mass of Ag = 107.9g/mol
Required mass of Ag = 1mol × 107.9g/mol = 107.9 g
To know more about Molar Mass, refer to:
brainly.com/question/837939
#SPJ4
skeletal structure for 5-isopentyldecane
Isopentane, commonly known as methyl butane or 2-methylbutane, is an alkane with a branched chain and five carbon atoms. Its chemical formula is C 5H 12 or CH(CH).
At normal temperature and pressure, isopentane is a highly flammable and volatile liquid. Additionally, under normal circumstances, it is the least dense liquid. [Reference needed] Isopentane has a standard boiling point that is only a few degrees above room temperature, therefore on a warm day, it will easily boil and evaporate. To achieve a liquid bath temperature of 160 °C, isopentane and liquid nitrogen are frequently utilized. Isopentane is a substantial component of natural gasoline, however, it normally only makes up 1% or less of natural gas.
To find more on Isopentane refer here:
https://brainly.com/question/5138367
#SPJ4