p-Fluoroanisole reacts with sulfur trioxide and sulfuric acid. Draw the major product of this substitution reaction; if applicable. minimize formal charges via expanded octets. Assume 1 equivalent of reagents used.

If my heater can supply 40Kbtu/h,then it will take  one hour to heat the water.

With the increase in temperature, particles or atoms' vibrations increment. These vibrations are then moved starting with one piece of the body then onto the next. The proportion of energy with which the particles vibrate in a framework is named as intensity put away in that item.

According to the meaning of heat, it is characterized as the progression of energy from a warm to a cooler article. The heading of stream of the intensity energy takes from the substance of higher temperature to the substance of lower temperature. This is on the grounds that the atoms are vibrating quicker and move their energy to the particles vibrating more slow. The vibrational energy is additionally named as its intensity content. The heat content in the body makes it hot or cold. More prominent the intensity content, the more sizzling the body will be.

A substance might retain heat without an expansion in temperature by changing starting with one actual state then onto the next. During the time spent liquefying, the substance is changed from strong to fluid. In the sublimation cycle, the strong is changed over into a fume state. During the time spent heating up, the fluid is changed over completely to fume. Heat is a type of energy that can be changed over into work. How much energy is communicated in units of work. It is communicated in joules, foot-pounds, kilowatt-hours, or calories

This is because 1 kBtu is equivalent to 1,000 BTUs, and 40 kBtu/h is equivalent to 40,000BTU/s

Now,in 1hr =60 minutes,and in 1 minute=60sec.

So,in 1sec ,it will take =(60/40000)×40000=60minutes or 1 hr.

To know more about heat,visit here:

https://brainly.com/question/1429452

#SPJ4

Along the whole axon, voltage-gated Na+ channels are present. It is an all-or-nothing event for the action potential. Each location along the axon sees the replication or propagation of action potentials. all of these are reasonable explanation.

To learn more about axon refer to:

https://brainly.com/question/14558084

#SPJ4

The metal activity series is an empirical tool used to predict the reactivity of products in substitution reactions and metals in substitution and ore mining reactions with water and acids.

The active series of metals is a table listing metals in order of decreasing reactivity of the elements. Generally, the more reactive metal is, the metal which is more strongly reacts with other metallic elements. The faster reaction, can lose electrons with faster rate to form positive charges or positive ions. Due to containment of reactivity order it is called the reactivity series. A series of activities determines the ability to displace hydrogen ions from water and other solutions such as acidic or ionic solutions. For example, sodium metal can displace hydrogen ions out of solution, so it is considered more reactive than elemental hydrogen. It helps determine the nature of the reaction and which element displaces another element in a chemical reaction.

To learn more about metal activity series, visit :

https://brainly.com/question/19482695

#SPJ4

Negative

Explanation:

electrons are negatively charged

The lewis structure of the SO₃²⁻ is as follows :

                     ..      ..

         : O :  = S - : O :⁻

                     |

                  : O :⁻

                    °°

In the lewis structure of SO₃²⁻, the Central atom of theSO₃²⁻ion is the sulfur atom. Around the sulfur atom, there are the four bonds and the  single lone pair in the lewis structure of the  SO₃²⁻ion. Therefore, the five electron pair groups are around the central atom of the SO₃²⁻ion.

The total number of the valence electrons in the SO₃²⁻ is the 26 electrons. The sulfur is the less electronegative than the oxygen. Therefore the sulfur is the central atom.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

The code for making dystrophin starts with DNA (deoxyribonucleic acid), which is a molecule that carries the genetic instructions used in the growth, development, functioning, and reproduction of all living organisms.

Duchenne muscular dystrophy (DMD) is a genetic disorder caused by mutations in the dystrophin gene located on the X chromosome. The dystrophin protein plays an important role in maintaining the structure and function of muscle fibers. In individuals with DMD, the dystrophin protein is too short or absent, which leads to progressive muscle weakness and loss of function.

The process of making dystrophin starts with the genetic code that is stored in the DNA molecule. The DNA is transcribed into messenger RNA (mRNA), which carries the genetic code from the nucleus to the ribosomes in the cytoplasm of the cell. The ribosomes then use the mRNA as a template to synthesize the dystrophin protein through a process called translation.

In individuals with DMD, mutations in the dystrophin gene can cause errors in the genetic code, which can lead to a shortened or non-functional dystrophin protein. Without a fully functional dystrophin protein, muscle fibers are more susceptible to damage and degeneration, which can lead to the symptoms of DMD.

Learn more about DNA here https://brainly.com/question/264225

#SPJ4

68.9g mass of the water would be boiled away

What is  specific heat capacity?

The amount of heat needed to raise a substance's temperature by one degree Celsius per gram is known as its specific heat. Typically, calories or joules per gram per degree Celsius are used as the units of specific heat. For instance, water has a specific heat of 1 calorie (or 4.186 joules) per gram per degree Celsius.

The amount of energy necessary to raise the temperature of 1 kilogram of tissue by 1 K (=1°C) is referred to as the specific heat capacity of tissue.

Q= mcdeltT

  = 350g x 418J x (100-20)c

  =  117,040J

Q total = Q1+Q2

             =275000J - 117040 J

             =  157960 J (left in beaker)

Q = mdelt Hv

m = Q2/0h

    = 157960 J / 2260J/g

    = 69.8g

To learn more about specific heat capacity use link below:

https://brainly.com/question/28825214

#SPJ1

The atomic mass of Fe (Iron) is 55.85 amu (Atomic mass unit).

The average mass of an element's atoms, commonly known as its atomic weight, is calculated using the average atomic mass and the relative abundance of isotopes within a naturally occurring element.

The atomic mass of such an atom serves as a measure of its size. The weight of an electron is so much lighter than that of the other particles that the mass of an atom is just that of the nucleus, despite the fact that the mass of an atom is theoretically the sum of the weights of its protons, neutrons, and electrons. The atomic mass of iron is therefore 55.85 amu.

To know more about atomic mass, visit,

brainly.com/question/14250653

#SPJ4

The lewis structure of the N₂ is as :

: N ≡ N :

The  N₂ Lewis structure has the triple bond in between the two nitrogen atoms. According to the octet rule, the nitrogen atoms will need to bond the three times. The N₂ molecule is the diatomic, that means the two atoms of the same element are connected in the pair. The molecular geometry for the N₂ molecule will be the linear, with the bond angle of the about 180°.

The Nitrogen has the total number of the 5 valence electrons, so the doubling that, we will have the total of 10 valence electrons with the two nitrogen atoms.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

The certain temperature at which a liquid transforms into a solid is understood as its Freezing Point. Like the melting point, the freezing point also increases when there is an upsurge in pressure.

A better accurate explanation of a freezing point is the temperature at which liquid and solid phases coexist in equilibrium. Or the freezing point of a substance may be specified as the temperature at which the vapor pressure of a solid is identical to the vapor pressure of the liquid. As we talked about freezing is the process where a substance transitions its state from liquid to solid, we comprehend that in this process a substance is changing from one state of matter into another.

To learn more about freezing point visit here:

https://brainly.com/question/11420511

#SPJ4

Considering the Gay-Lussac's law, if a flask filled with carbon dioxide is heated from 10. °C to 40. °C and he starting pressure was 98 kPa, the final pressure is 108.39 kPa.

Gay-Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant: If the temperature increases, the pressure will increase and if the temperature decreases, the pressure will decrease.

That is, the pressure of the gas is directly proportional to its temperature and is expressed mathematically as:

P÷T=k

where:

Analyzing an initial state 1 and a final state 2, it is fulfilled:

P₁÷T₁=P₂÷T₂

In this case, you know:

Replacing in Gay-Lussac's law:

98 kPa÷ 283 K=P₂÷ 313 K

Solving:

(98 kPa÷ 283 K)× 313 K=P₂

108.39 kPa= P₂

Finally, the final pressure is 108.39 kPa.

Learn more about Gay-Lussac's law:

https://brainly.com/question/4147359

#SPJ1

Answer: 27

Explanation: so if u divide the thingy from the thingy to a thingy u get a thingy

The edge length of the cube is approximately 3.75 cm.

We can use the density and volume of the cube to find the edge length. Let's assume the edge length of the cube is "x" cm.

The volume of the cube is given by:

volume = x³

We can also use the density of copper to relate the mass of the cube to its volume:

density = mass / volume

Rearranging this equation, we get:

mass = density x volume

Substituting the given values, we get:

mass = 8.96 g/cm³ x (x cm)³

mass = 8.96 g/cm³ x x³

mass = 8.96x³ g

We can now set the mass of the cube equal to the mass of copper, which will allow us to solve for the edge length:

mass of cube = mass of copper

8.96x³ g = 500 g

Solving for x, we get:

x³ = 500 g / 8.96 g/cm³

x³ = 55.8036 cm³

Taking the cube root of both sides, we get:

x = (55.8036 cm³)^(1/3)

x ≈ 3.75 cm

Therefore, the edge length of the cube is approximately 3.75 cm.

Learn more about mass of copper here :

brainly.com/question/1782887

#SPJ4

EtOH is the abbreviation for alcohol because EtOH stands for ethyl alcohol, which is the chemical name for ethanol.

Ethyl alcohol is the chemical formula for ethanol, which is the most common type of alcohol found in alcoholic beverages. The first "Et" stands for the ethyl group, which is made up of two carbon atoms and five hydrogen atoms, and the "OH" stands for the hydroxyl group, which is made up of one oxygen atom and one hydrogen atom.

Together, these two groups make up the chemical formula for ethanol, which is C₂H₅OH. Therefore, EtOH is used as an abbreviation for alcohol because it represents the chemical formula for the most common type of alcohol found in alcoholic beverages.

To know more about ethyl alcohol here:

https://brainly.com/question/13821536#

#SPJ11

Answer:

A

Explanation:

A is closest to the sun. It follows from Kepler's second law that Earth moves the fastest when it is closest to the Sun.

The charge of the gold ion in AuS₂ is +4.

The charge of the gold in AuS₂ can be determined by balancing the charges of the individual components. In this case, the sulfide (S) ion has a charge of -2, and there are two sulfide ions in AuS₂, so the total charge from the sulfide ions is -4. To balance this charge, the gold ion must have a charge of +4.

Therefore, the charge of the gold ion in AuS₂ is +4. This information can be used to write the balanced chemical equation for the formation of AuS₂, which would be represented as:

Au⁺⁴ + 2S⁻² → AuS₂

This equation shows that two sulfide ions with a charge of -2 are combining with a single gold ion with a charge of +4 to form the compound AuS₂.

Learn more on ionic charge here: https://brainly.com/question/22530066

#SPJ1

The 7 electrolytes are sodium, calcium, potassium, chloride, phosphate, bicarbonates and magnesium.

Electrolytes are minerals and salts that are necessary for the body to function properly. They help regulate the body's water balance, pH, and nerve and muscle function. The seven most important electrolytes are sodium, calcium, potassium, chloride, phosphate and magnesium.

1) Sodium:

mineral mandatory necessary for regulating body fluids.

2) Calcium:

mineral element important for bone and teeth health.

3) Potassium:

mineral necessary useful for regulating heart rate and blood pressure.

4) Chloride:

electrolyte essential for regulating fluid balance in the body.

5) Phosphate:

mineral element important for energy production and cell membrane structure.

6) Magnesium:

mineral element useful for many metabolic processes in the body.

7) Bicarbonates:

are salts of carbonic acid, containing the anion [tex]HCO_{3}[/tex] - or its equivalent.

To know more about electrolytes:

brainly.com/question/17089766

#SPJ4

Unit rate in gallons per week is [tex]1\frac{5}{9}[/tex] gal/week,if a pump release water at a rate of 10 gallons every 45 days.

Unit rate is the proportion of two distinct units, with denominator as 1. For instance, kilometer/hour, meter/sec, miles/hour, pay/month, and so on. Number-crunching is presumably the most fundamental and old part of math and is regularly utilized in our everyday life. This subject is about the issues in light of numerals and tasks upon numerals. We in all actuality do tackle issues of math deliberately or accidentally during our day to day everyday practice. For instance - While buying vegetables or natural products, in different dealings or in assessing pace of something and so on.

To find the rate, we can first find out how much gallons is released in 1 day, and then find out how much gallons it releases in 7 days/1 week.

For one day rate, the pump releases 10/45 gal/day.

Then we multiply the rate by 7.

So,10/45/gal/day =(10/45)×7 = 70/45gal/day = 14/9gal/day =1[tex]\frac{5}{9}[/tex]  gal/day

To know more about unit rate,visit here:

https://brainly.com/question/13795269

#SPJ4

The main types of dyes are Natural dyes, Synthetic dyes, Vat dyes, and Reactive dyes.

Dyes are dyes that are used to color items such as fabrics, paper, and food. There are several varieties of dyes, however, the following are the most common:

Learn more about the dyes at

https://brainly.com/question/29109733

#SPJ4

At higher temperature and lower pressure, gases most likely to behave ideally.

An ideal gas is a hypothetical gas made out of many haphazardly moving point particles that are not expose to interparticle interactions. The ideal gas idea is valuable since it complies with the best gas regulation, a worked on condition of state, and is managable to investigation under factual mechanics. The necessity of zero communication can frequently be loose if, for instance, the connection is totally flexible or viewed as point-like crashes.

Under different states of temperature and tension, many genuine gases act subjectively like an ideal gas where the gas particles (or iotas for monatomic gas) assume the part of the best particles. Many gases, for example, nitrogen, oxygen, hydrogen, noble gases, a few heavier gases like carbon dioxide and combinations like air, can be treated as ideal gases inside sensible tolerances over an extensive boundary range around standard temperature and tension.

To know more about ideal gas,visit here:

https://brainly.com/question/8711877

#SPJ4

If an object experiences a change in temperature of 10 ⁰C, The temperature change in Kelvin is 10 K.

To convert a temperature change from Celsius to Kelvin, you simply add 273.15 to the Celsius temperature change. However, this only applies to absolute temperatures, not temperature changes. For temperature changes, the conversion factor is 1:1, meaning that a change of 1 ⁰C is equal to a change of 1 K.

Here is the step-by-step explanation:
1. Start with the temperature change in Celsius: 10 ⁰C
2. Since the conversion factor for temperature changes is 1:1, the temperature change in Kelvin will also be 10 K.
3. Therefore, the temperature change in Kelvin is 10 K.
In conclusion, if an object experiences a change in temperature of 10 ⁰C, the temperature change in Kelvin will also be 10 K.

Learn more about Kelvin at:

https://brainly.com/question/18038227

#SPJ11

There are some important equations that we must know:

[tex]PV=nRT[/tex]

[tex]n=\dfrac{m}{M}[/tex]

We're given:

First, solve for n:

[tex]n=\dfrac{m}{M}[/tex]

[tex]n=\dfrac{128}{32.00}\\\\n=4[/tex]

Now, solve using the Ideal Gas Law:

[tex]PV=nRT[/tex]

⇒ Isolate V:

[tex]V=\dfrac{nRT}{P}[/tex]

⇒ Plug in given values:

[tex]V=\dfrac{4*8.31*273}{101.3}\\\\V =89.6[/tex]

a. 89.6 L

Each different signal in a 1H NMR spectrum represents a different set of hydrogen atom. Hydrogen atoms that are equivalent give the same signal.

There are three signals in total in 1H NMR spectrum. They are 1,3-dimethylbenzene, Hb that is situated between two methyl groups, the two Hc protons are one carbon away from a methyl group, and Hd is two carbons away from a methyl group. Hence, the four aromatic protons can be divided into three sets. The two methyl groups are equivalent to each other.

Generally, there are three isotopes of hydrogen used in NMR spectroscopy, which are 1 Hydrogen, 2 Deuterium and 3 Tritium. Each isotope resonates at much different frequency for example if 1H resonates at 400 MHz then 2H resonates at 61.402 MHz.

Learn more about NMR spectroscopy from the link given below.

https://brainly.com/question/21797445

#SPJ4

Answer: it is red

Explanation: it is getting hotter

Answer:

Atmoic weight / mass...........

Sodium is the element that is in group 1 and has a higher atomic number than chlorine but a lower atomic number than bromine.

An element is a material that, when heated or illuminated, can indeed be broken down into two or maybe more simpler compounds by any chemical technique. For example, when a piece of gold is melted, it still melts as well as stays the gold element.

Elements are thought to be the fundamental building units of matter. There seem to be 118 elements in all that exist today, 94 of which occur naturally and the remaining 24 are created artificially. Sodium is the element that is in group 1 and has a higher atomic number than chlorine but a lower atomic number than bromine.

Therefore, sodium is the element that is in group 1 and has a higher atomic number than chlorine but a lower atomic number than bromine.

To know more about element, here:

https://brainly.com/question/28223007

#SPJ9

The time required for half of a sample of a radioactive isotope to break down by radioactive decay to form a daughter isotope is option (b) Half-life

The time required for half of a sample of a radioactive isotope to break down by radioactive decay to form a daughter isotope is referred to as the half-life of the isotope. This property is used in various scientific fields, including geology, archaeology, and nuclear physics.

In geology, the half-life of a radioactive isotope is used to determine the age of rocks and minerals through a method known as radiometric dating or absolute dating. By measuring the ratio of the parent isotope to the daughter isotope, scientists can calculate the age of a sample.

The geologic column refers to the layers of rocks and fossils that make up the Earth's crust, with the oldest layers at the bottom and the youngest at the top. Absolute age refers to the actual age of a rock or fossil, while absolute dating is a technique used to determine that age.

Therefore, the correct option is (b) Half-life

Learn more about Half-life here

brainly.com/question/16387602

#SPJ4

The molecular geometry of clf3 is trigonal bipyramidal with a T-shaped geometry due to the repulsion between lone pairs.

The sub-atomic calculation of clf3, or chlorine trifluoride, is three-sided bipyramidal. It has a focal chlorine iota that is clung to three fluorine particles and has two solitary sets of electrons. The three fluorine iotas are organized around the chlorine particle in a three-sided planar math, while the two solitary matches possess the pivotal situations above and underneath the plane. The particle has a T-molded math because of the repugnance between the solitary matches and the bond sets of electrons. Chlorine trifluoride is a profoundly responsive and poisonous gas utilized in the assembling of semiconductors and other electronic parts, as well as in rocket charges.

To learn more about molecular geometry, refer:

https://brainly.com/question/29840520

#SPJ4