Phosphorus pentachloride decomposes to phosphorus trichloride and chlorine gas at elevated temperatures by the following reaction:
PCl5(g) PCl3(g) + Cl2(g). If Kc = 1.8 at 250°C, what is the value of Kp at the same temperature? Can someone show me how to get the answer?
Answer choices:
8.8 x 10-2
4.2 x 10-2
77
65

Answers

Answer 1

Phosphorus pentachloride decomposes to phosphorus trichloride and chlorine gas at elevated temperatures by the following reaction:

PCl5(g) PCl3(g) + Cl2(g).

If Kc = 1.8 at 250°C, the value of Kp at the same temperature is given as follows. The correct option is 65. (Option D)

Kc = {PCl3 * Cl2} / {PCl5}

At equilibrium;Kp = {PCl3} * {Cl2} / {PCl5}

Since the stoichiometry of the given chemical equation is 1:1:1, Kp = Kc. Kp = 1.8 at 250°C. Therefore the answer is 65

.According to the above data, the calculation of the value of Kp at the same temperature is as follows;

Kc = {PCl3 * Cl2} / {PCl5}1.8 = {PCl3 * Cl2} / {PCl5} (At 250°C)

Kp = {PCl3} * {Cl2} / {PCl5} (At 250°C)

Kp = KcKp = 1.8

Therefore, the correct answer is option D, which is 65.

Learn more about Kp at brainly.com/question/22074421

#SPJ11


Related Questions

Which one of the following salts, when 1 mole is dissolved in water, produces the solution with a pH closest to 7.00? A) NH4BR B) NaHSO4 C) NaF D) Ba O E) LiOH

Answers

When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The resulting solution is slightly basic, with a pH slightly greater than 7. The correct answer is C) NaF.

What are salts?

Salts are ionic compounds formed from the reaction between an acid and a base. They are composed of positively charged ions (cations) and negatively charged ions (anions). Salts are typically solid at room temperature and have high melting and boiling points.

When dissolved in water, salts can dissociate into their component ions, allowing them to conduct electricity. Some common examples of salts include table salt (NaCl), baking soda (NaHCO3), and Epsom salt (MgSO4).

When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The F- ions react with water molecules to form HF and OH- ions. The resulting solution is slightly basic, with a pH slightly greater than 7.

Learn more about salts here https://brainly.com/question/13818836

#SPJ1

what volume of 0.0100 m mno4 - is needed to titrate a solution containing 0.355 g of sodium oxalate?

Answers

To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

What is Titration?

Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.

The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:

5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O

To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.

Mass of Na₂C₂O₄ = 0.355 g

Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol

From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.

Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol

The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.

Molarity (M) = moles (n) / volume (V)

n = M × V

V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)

Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Learn more about Titration here: https://brainly.com/question/186765

#SPJ11

Select all of the following lab techniques that you will utilize in the Recystallization experiment is called

Answers

The correct answer is that the recrystallization is a common technique used to purify solid compounds in organic chemistry.

The following are some of the lab techniques that may be utilized in a recrystallization experiment: Dissolving the impure compound in a suitable solvent. Filtering the solution to remove insoluble impurities. Heating the solution to dissolve the compound completely. Allowing the solution to cool slowly to allow the compound to crystallize out. Filtering the crystallized product using a Buchner funnel or filter paper. Washing the product with a suitable solvent to remove any remaining impurities. Drying the product using a desiccator or oven. Other techniques that may be used in conjunction with recrystallization include melting point determination, thin-layer chromatography, and spectroscopic analysis to confirm the purity and identity of the compound.

To learn more about recrystallization click the link below

brainly.com/question/29215760

#SPJ4

valency of aluminum is 3 give reason​

Answers

Answer:

The valency of an element refers to the number of electrons an atom can gain, lose or share to attain a stable configuration.

Aluminum (Al) is a metal with an atomic number of 13, which means it has 13 electrons in its neutral state. In its outermost shell, aluminum has three valence electrons.

To attain a stable electronic configuration, aluminum can lose these three valence electrons to become a cation with a 3+ charge (Al3+). By losing these electrons, the outermost shell of the aluminum atom becomes completely filled with eight electrons, which is a stable configuration.

Therefore, the valency of aluminum is 3 because it can lose three electrons to form a stable cation with a 3+ charge.

Explanation:

Answer:

The valency of an element refers to the number of electrons an atom can gain, lose or share to attain a stable configuration.

Aluminum (Al) is a metal with an atomic number of 13, which means it has 13 electrons in its neutral state. In its outermost shell, aluminum has three valence electrons.

To attain a stable electronic configuration, aluminum can lose these three valence electrons to become a cation with a 3+ charge (Al3+). By losing these electrons, the outermost shell of the aluminum atom becomes completely filled with eight electrons, which is a stable configuration.

Therefore, the valency of aluminum is 3 because it can lose three electrons to form a stable cation with a 3+ charge.

Explanation:

For the reactionA(g) ? 2B(g), a reaction vessel initially contains only A at a pressure of PA=1.19 atm . At equilibrium, PA =0.20 atm . Calculate the value of Kp. (Assume no changes in volume or temperature.)

Answers

The value of Kp for the reaction with equilibrium pressure of A is given as PA = 0.20 atm and the initial pressure of A is 0.0190.

What is Kp?

To find the value of Kp for the reaction, we will use the expression for the equilibrium constant in terms of the partial pressures of the reactants and the products.

Kp = (PB)²/PA

where, PB is the equilibrium pressure of B.

Initially, there is no B in the reaction vessel, so the change in pressure of B is equal to its equilibrium pressure. Using the law of conservation of mass, we can write:

PV = nRT

where, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Since there is no change in volume or temperature, we can write:

PV = constant or P₁V₁ = P₂V₂

where, P₁ and P₂ are the initial and equilibrium pressures of A, respectively. Since A is the only gas initially present in the reaction vessel, we can write:

P₁ = PA = 1.19 atm, P₂ = 0.20 atm V₁ = V₂

Therefore, P₁V₁ = P₂V₂ = PAV₁ = PBV₂

Since, the number of moles of A and B are related by the balanced chemical equation, we can write:

2(PB) = nB

Substituting, PB in terms of PA and V1, we get:

Kp = (PB)²/PA = (nB/2V₂)²/PA

Kp= (nB/2PAV₁)²/PA= (nB)²/(4P²AV₁)

where, nB is the number of moles of B.

To find the number of moles of B, we use the balanced chemical equation. 2 moles of B are produced for every mole of A that reacts. Since, the initial pressure of A was 1.19 atm and the equilibrium pressure of A was 0.20 atm, 0.99 atm of A has reacted.

Therefore, the number of moles of A that has reacted is:

nB = (0.99/1.19) = 0.8327 mol

The total number of moles of the system is the sum of the moles of A and B initially present in the reaction vessel.

nTotal = nA + nB

Initially, only A is present, so nTotal = nA = 1 mol. The number of moles of B is therefore:

nB = nTotal - nA = 1 - 0.8327 = 0.1673 mol

Substituting the values of PA, nB, and V1, we get:

Kp = (nB)²/(4P²AV1) = (0.1673)²/(4 × 1.19² × 1) = 0.0190

Therefore, the value of Kp for the reaction is 0.0190.

Learn more about Kp here:

https://brainly.com/question/30550192

#SPJ11

Which of the following transitions (in a hydrogen atom) represents absorption of the shortest wavelength photon?A) n = 5 to n = 6.B) n = 4 to n = 5.C) n = 6 to n = 5.D) n = 7 to n = 6.E) n = 2 to n = 4.

Answers

The transition from n=2 to n=4 has the shortest wavelength photon absorption.

The electron in the hydrogen atom may only reside in a limited range of energy levels or orbitals, denoted by the primary quantum number, n. The energy levels rise as n rises, and an electron can transition from one energy level to another by absorbing a photon with an energy equal to the difference between the initial and final energy levels. A photon's energy is directly inversely correlated with its wavelength and directly correlated with its frequency. The transition from n=2 to n=4, which has the largest energy difference, includes the absorption of the photon with the shortest wavelength. The emission of ultraviolet light occurs from this transition, which corresponds to the Lyman series in the hydrogen spectrum.

learn more about shortest wavelength here:

https://brainly.com/question/21676157

#SPJ4

Mono addition of HBr to conjugated dienes leads to multiple products, and a given addition product can arise from more than one conjugated diene. Given below are the structures of five pairs of dienes - possible reactants in the reaction - and two allylic bromide products. Identify the pair of dienes wherein each diene can serve as a precursor for both of the addition products. Note that not all possible products are shown.

Answers

Mono addition of HBr to conjugated dienes leads to multiple products, and a given addition product can arise from more than one conjugated diene. The pair of dienes which can serve as precursors for both of the addition products are diene 1 and diene 2. Diene 1 can give rise to the allylic bromide product A as well as product B.

Diene 2 can give rise to the allylic bromide product C as well as product B.
The other three dienes cannot give rise to either of the two given allylic bromide products.
The given pairs of dienes are:
(a) H2C=CHCH=CH2 and H2C=CHCH2CH=CH2
(b) H2C=CHCH=CH2 and H2C=CHCH=CHCH3
(c) H2C=CHCH=CHCH3 and H2C=CHCH2CH=CH2
(d) H2C=CHCH=CHCH3 and H2C=CH2CH=CHCH3
(e) H2C=CHCH=CHCH3 and H2C=CH=CHCH2CH3 The given allylic bromide products are 1,2-dibromobutane and 2-bromo-2-butene respectively. Hence, the correct pair of dienes is (b) H2C=CHCH=CH2 and H2C=CHCH=CHCH3, since both of these dienes can act as precursors for both of the allylic bromide products.

For more such questions on HBr

https://brainly.com/question/12858312

#SPJ11

The enthalpy of vaporization for methanol is 35.2 kJ/ mol. Methanol has a vapor pressure of 1 atm at 64.7 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 41.9 °C?
Give your answer in atmospheres, to the third decimal point.
Question 2
3 pts
The enthalpy of vaporization for dimethyl ether is 27.5 kJ/mol. Dimethyl ether has a vapor pressure of 760 torr at 34.6 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure tor methanol at 0.1 °C? Give your answer in torr, to the first decimal point.

Answers

Answer:

To use the Clausius-Clapeyron equation, we need to know two sets of conditions for the substance in question. Let's start with question 1:

Question 1:

Given:

Enthalpy of vaporization, ΔHvap = 35.2 kJ/mol

Vapor pressure at T1 = 1 atm (or 760 torr), T1 = 64.7°C

We want to find: Vapor pressure at T2 = 41.9°C

First, we need to convert temperatures to Kelvin:

T1 = 64.7 + 273.15 = 337.85 K

T2 = 41.9 + 273.15 = 315.05 K

Now we can use the Clausius-Clapeyron equation:

ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)

where P1 and P2 are the vapor pressures at temperatures T1 and T2, respectively, R is the gas constant (8.314 J/mol·K), and ln is the natural logarithm.

Solving for P2, we get:

P2/P1 = e^(-ΔHvap/R * (1/T2 - 1/T1))

P2 = P1 * e^(-ΔHvap/R * (1/T2 - 1/T1))

Substituting the given values, we get:

P2 = 1 atm * e^(-35.2 kJ/mol / (8.314 J/mol·K) * (1/315.05 K - 1/337.85 K))

P2 = 0.496 atm

Rounding to three decimal places, the vapor pressure of methanol at 41.9°C is 0.496 atm.

Answer: 0.496 atm

Question 2:

Given:

Enthalpy of vaporization, ΔHvap = 27.5 kJ/mol

Vapor pressure at T1 = 760 torr, T1 = 34.6°C

We want to find: Vapor pressure at T2 = 0.1°C

Converting temperatures to Kelvin:

T1 = 34.6 + 273.15 = 307.3 K

T2 = 0.1 + 273.15 = 273.25 K

Using the Clausius-Clapeyron equation:

ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)

Solving for P2, we get:

P2/P1 = e^(-ΔHvap/R * (1/T2 - 1/T1))

P2 = P1 * e^(-ΔHvap/R * (1/T2 - 1/T1))

Substituting the given values, we get:

P2 = 760 torr * e^(-27.5 kJ/mol / (8.314 J/mol·K) * (1/273.25 K - 1/307.3 K))

P2 = 7.25 torr

Rounding to one decimal place, the vapor pressure of dimethyl ether at 0.1°C is 7.3 torr.

Answer: 7.3 torr

etermine whether each of the molecules below is polar or nonpolar. linear c o 2 c o 2 choose... tetrahedral c h 4 c h 4 choose... linear n 2 n 2 choose... bent h 2 o h 2 o choose...

Answers

CO₂ is nonpolar molecule, CH₄ is a nonpolar molecule, N₂ is a nonpolar molecule, and H₂O is a polar molecule.

What are Polar and non-polar molecules?

Non polar molecules are the molecules which are symmetric with no unshared electrons in the structure. Polar molecules are the asymmetric molecules, which are either containing lone pairs of electrons on a central atom or having atoms with different electronegativities bonded to each other.

The linear CO₂ molecule is polar molecule due to the difference in electronegativity between the Carbon and Oxygen atoms. The tetrahedral CH₄ molecule is nonpolar since all the atoms have the same electronegativities. The linear N₂ molecule is nonpolar since it has a symmetrical linear shape. Finally, the bent H₂O molecule is polar due to the difference in electronegativity between the Hydrogen and Oxygen atoms.

Learn more about Molecules here:

https://brainly.com/question/15173422

#SPJ11

How much cesium (half-life = 2 years) would remain from a 10 g sample after 2 years?

Answers

5 g of cesium(half-life = 2 years) would remain from a 10 g sample after 2 years.

Cesium has a half-life of 2 years. The half-life of a material is the length of time necessary for half of it to degrade or react. Half-life is a property of a chemical that is commonly represented by the sign "t½".

To find out how much cesium (half-life = 2 years) would remain from a 10 g sample after 2 years, we can use the formula

N = N0(1/2)^(t/t1/2) where N is the final amount, N0 is the initial amount, t is the time passed, and t1/2 is the half-life period.

In this case, N0 = 10 g, t = 2 years, and t1/2 = 2 years.

Substituting these values into the formula:

N = N0(1/2)^(t/t1/2)

N = 10 g(1/2)^(2/2)

N = 10 g(1/2)^1

N = 10 g(0.5)

N = 5 g

For more such questions on half-life, click on:

https://brainly.com/question/14936355

#SPJ11

what determines the difference in size of atoms or ions if they are isoelectronic? select the correct answer below: a. the number of orbitals b. the number of neutrons c. the number of electrons d. the number of protons

Answers

The option determines the difference in size of atoms or ions if they are isoelectronic is option D which is the number of protons.

Isoelectronic explained.

Isoelectronic is a term used in chemistry to describe two or more atoms or ions that have the same number of electrons. These species may have different numbers of protons and neutrons in their nuclei, but they all have the same electron configuration.

For example, the nitrogen atom has 7 electrons, while the fluoride ion (F-) has 10 electrons. However, if we add three more electrons to the nitrogen atom to form the nitrogen ion (N3-), it will have the same number of electrons as the fluoride ion (10 electrons). Therefore, the nitrogen ion and the fluoride ion are isoelectronic.

The difference in size between two isoelectronic species is determined by the number of protons in the nucleus. This is because the number of protons determines the strength of the electrostatic attraction between the positively charged nucleus and the negatively charged electrons.

As the number of protons in the nucleus increases, the electrostatic attraction becomes stronger, which pulls the electrons closer to the nucleus and reduces the atomic or ionic radius. Therefore, the correct answer is d. the number of protons.

Learn more about isoelectronic below.

https://brainly.com/question/1626090

#SPJ1

i) what would happen to the Vmax of the enzyme if you were to reduce the substrate concentration by 50%?ii)provide reasoning. Less than 50 words total

Answers

1) If you reduce the substrate concentration by 50%, the Vmax of the enzyme will decrease proportionally.ii) When the substrate concentration is lowered, fewer substrates will bind to the enzyme, resulting in a lower rate of product formation. As a result, the enzyme's maximum velocity (Vmax) will decrease, and the reaction's rate will slow. As a result, the kinetic parameters of the enzyme, including Vmax and Km, will change.

2) The Vmax of an enzyme is the maximum rate of the reaction that can be achieved by the enzyme when it is saturated with a substrate. A decrease in the substrate concentration means that the enzyme's active sites are less likely to be filled with substrates, and the maximum rate of the reaction that can be achieved by the enzyme decreases in proportion.

As the substrate concentration is lowered, the enzyme's Vmax decreases. The enzyme-substrate complex's kinetics are influenced by the substrate concentration. The Michaelis-Menten equation is used to describe the relationship between the substrate concentration and the reaction rate. The Km value and the Vmax value are two constants in the Michaelis-Menten equation.

Know more about Michaelis-Menten here:

https://brainly.com/question/30756012

#SPJ11

Name the following compounds:

Answers

The names of the given compounds are:

a) Carbon tetrachloride

b) 1-chloro-2-chloromethane (also known as chloroethyl chloride)

c) 1,2-dichloroethane

d) 2-chloro-2-methylbutane

e) 1,4-dichlorobutane

What are compounds

A compound is a substance made up of two or more different elements chemically combined in fixed proportions. The elements in a compound are held together by chemical bonds, which are formed when atoms of different elements share or transfer electrons to achieve a stable electron configuration.

Compounds have unique properties that are different from their constituent elements, such as melting point, boiling point, density, and reactivity. They can be formed through various chemical reactions, such as synthesis, decomposition, combustion, and oxidation. Examples of common compounds include water (H2O), table salt (NaCl), carbon dioxide (CO2), and glucose (C6H12O6).

Learn more about chemical compounds here https://brainly.com/question/29594386

#SPJ1

what was an early outcome of regime change in iraq?

Answers

Saddam Hussein's overthrow in 2003 was one of the early results of regime transition in Iraq. Given that Hussein had been in charge of Iraq's government and society for more than 20 years,

this represented a dramatic change in the political landscape of the nation. Regime transition, however, was followed by a turbulent era of political unrest and sectarian warfare. Broader geopolitical repercussions of the US-led invasion of Iraq and subsequent government change included strained ties with other nations in the region, a rise in anti-American sentiment, and the creation of new extremist organizations like ISIS. The long-term implications of the Iraqi government transition are still being discussed and examined, although is clear that the initial outcome was one of significant.

learn more about Iraq  here:

https://brainly.com/question/29605758

#SPJ4

the nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min. the oxidation half-reaction converts nickel atoms to nickel(ii) ions. what is the constant current

Answers

The constant current is 0.0406 A for the  nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min. the oxidation half-reaction converts nickel atoms to nickel(ii) ions.

What is the constant current?

In an electrolytic cell, the oxidation half-reaction converts nickel atoms to nickel (II) ions, and the nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min.

To determine the constant current, we can use Faraday's laws. Faraday's laws were established by Michael Faraday, a British scientist, in the early 19th century. His laws explain how much mass will be lost or gained at an electrode during electrolysis and how much electrical energy is required. Faraday's first law states that the mass of a substance deposited during electrolysis is proportional to the number of electrons that pass through the electrolyte.

The following formula can be used to calculate the constant current:

I = (nF / t) × (m / M)

where, I = Constant Current (in amperes), n = number of moles of electrons transferred, F = Faraday constant (96500 C/mol), t = Time taken, m = mass of substance (in grams), M = Molar mass of the substance (in grams/mol)

The Faraday constant is the amount of charge that must pass through an electrode to deposit or liberate 1 mole of any substance. For nickel, the molar mass is 58.69 g/mol, and the oxidation state is +2, which means that two electrons are lost per nickel atom. Thus, n = 2.

To calculate the current, we must first find the number of moles of nickel atoms lost during electrolysis. The formula for the number of moles is:

n = m / M

n = 1.20 g / 58.69 g/mol

n = 0.0204 mol.

Now we can use the formula above to calculate the current:

I = (nF / t) × (m / M)

I = (2 × 96500 C/mol / 2130 seconds) × (1.20 g / 58.69 g/mol)

I = 0.0406 A

I = 40.6 mA or 0.0406 A.

Therefore, the constant current is 40.6 mA or 0.0406 A.

Read more about current here:

https://brainly.com/question/12815553

#SPJ11

The volume of a gas is increased from 0.5L to 4.0 L while the temperature is held constant. Thepressure of the gas:A. increases by a factor of fourB. decreases by a factor of eightC. increases by a factor of eightD. increases by a factor of two

Answers

The volume of a gas is increased from 0.5L to 4.0 L while the temperature is held constant. The pressure of the gas decreases by a factor of eight.

Charles's Law- Charles's Law is a physical law that states that for a fixed mass of gas held at a constant pressure, the volume of the gas is directly proportional to the absolute temperature of the gas.

V1/T1=V2/T2 (Constant Pressure)

Boyle's Law- Boyle's law is a gas law that states that the pressure applied to a gas at a constant temperature is inversely proportional to the volume of the gas.

P1V1 = P2V2 (Constant Temperature)

What is the ideal gas law? The ideal gas law is a physical law that describes the behavior of an ideal gas in terms of its pressure, volume, temperature, and the number of particles present.

PV = nRT

Where: P = pressure, V = volumen = number of particles present, R = ideal gas constant, T = absolute temperature

What happens to the pressure of the gas when the volume of the gas is increased? The pressure of the gas decreases when the volume of the gas is increased while holding the temperature constant. Therefore, when the volume of the gas increases from 0.5L to 4.0 L while the temperature is held constant, the pressure of the gas decreases.

The correct answer is B. decreases by a factor of eight.

To learn more about "volume of a gas", visit: https://brainly.com/question/27100414

#SPJ11

F. Recognize that there are more than 100 elements and some have
similar properties as shown on the Periodic Table of Elements.
Type of Element Metals
Properties
Examples:
Nonmetals
Metalloids
Helgitula

Answers

Answer:

Metals are malleable, and ductile, have a shiny luster, form metallic bonds, and are superb conductors (to name some properties).

Ex. Copper

Malleable is the ability to be pounded into thin sheets.

Ductile is the ability to be drawn into a thin wire.

Metallic is metal-to-metal bonding.

Nonmetals, however, are not malleable, or ductile, are not good conductors and form covalent and ionic bonds.

Ex. Carbon

Covalent is nonmetal-to-nonmetal bonding.

Ionic is metal-to-nonmetal bonding.

Metalloids

Semiconductors, and are basically metal and nonmetal properties combined. I.E. Has a metallic luster but is brittle (not malleable).

Ex. Sillicon

How many moles of carbon monoxide would be needed to react with 100 g Fe₂O3?​

Answers

Explanation:

Amount = Reacting mass ÷ Molecular MassReacting mass = 100gMolecular Mass = (55.845×2) + ( 16 ×3) = 111.69 + 48 = 159.69 g/ mol.: Amount= 100÷ 159.69 = 0.63moles

.: 0.63 moles of carbon monoxide would be needed to react with 100g of Fe2O3

When scientists discovered that atoms are composed of smaller particles, why didn’t they reject atomic theory?

Answers

When scientists first discovered that atoms were composed of smaller particles, such as electrons, protons, and neutrons, they did not reject atomic theory because the experimental evidence supported the idea that atoms were still the fundamental building blocks of matter.

Instead of rejecting atomic theory, scientists modified it to incorporate the new information about the structure of atoms. For example, Ernest Rutherford's famous gold foil experiment in 1911 showed that atoms had a small, positively charged nucleus at their center, which was surrounded by negatively charged electrons.

This discovery led to the development of the modern model of the atom, which is still based on the idea that atoms are the smallest units of matter that retain the properties of an element. However, the model has been updated to reflect our current understanding of the subatomic particles that make up atoms.

To know more about atomic theories, here

brainly.com/question/28853813

#SPJ4

identify the options below that are results of adding a catalyst to a chemical system. (select all that apply) select all that apply: the reaction rates are increased. the reaction quotient is unaffected. the reaction quotient decreases. the equilibrium constant is unaffected

Answers

Adding a catalyst to a chemical system has some certain effects including increased reaction rates, reaction quotient is unaffected.

What is a catalyst?

A catalyst is an element or compound that speeds up the rate of a chemical reaction by lowering the activation energy barrier. The catalyst provides an alternative mechanism with a smaller activation energy that is followed by the reactants. As a result, adding a catalyst to a chemical system increases the reaction rate.

The reaction quotient is unaffected: When a catalyst is added to a chemical system, the reaction quotient is not affected because it does not change the composition of the equilibrium mixture. Therefore, adding a catalyst to a chemical system does not have an effect on the reaction quotient.

Therefore, the correct options are A and B.

Learn more about Catalyst here:

https://brainly.com/question/24430084

#SPJ11

Is sodium hydroxide a physical or chemical property?

Answers

The correct answer is that Sodium hydroxide (NaOH) is a chemical compound that consists of sodium ions (Na+) and hydroxide ions (OH-).

Sodium hydroxide is commonly known as caustic soda and is used in many industrial processes, including paper production, soap making, and water treatment. Since sodium hydroxide is a chemical compound, it is considered a chemical property rather than a physical property. A physical property is a characteristic of a substance that can be observed or measured without changing the identity or composition of the substance, while a chemical property is a characteristic of a substance that describes how it interacts with other substances to form new substances. Sodium hydroxide is highly reactive and can undergo chemical reactions with a variety of other substances. For example, it can react with acids to form salts and water, and with certain metals to produce hydrogen gas. These chemical reactions are a result of the chemical properties of sodium hydroxide and its ability to react with other substances, indicating that it is a chemical property.

To learn more about Sodium hydroxide click the link below

brainly.com/question/18723610

#SPJ4

The following balanced chemical equation represents the burning of octane, one of the components of gasoline used to fuel engines.2C8H18(g) +25O2(g) --> 16CO2(g) + 18H2O(l)1. How many molecules of carbon dioxide are represented by the equation?2. How many moles of octante are represented by the equation?3. What is the simplified mole ratio of octane to carbon dioxide?4. What is the simplified mole ratio of oxygen to octane?

Answers

1. The balanced chemical equation shows that for every 2 molecules of octane burned, 16 molecules of carbon dioxide are produced. Therefore, the number of molecules of carbon dioxide represented by the equation is 16.

Solutions to rest of the questions

2. The balanced chemical equation shows that for every 2 molecules of octane burned, 25 molecules of oxygen are required. Therefore, the ratio of octane to oxygen is 2:25. From this, we can determine the number of moles of octane represented by the equation by dividing the given amount of oxygen by the ratio:

25 mol O2 × (2 mol C8H18 / 25 mol O2) = 2 mol C8H18

Therefore, the equation represents 2 moles of octane.

3. The simplified mole ratio of octane to carbon dioxide can be determined by dividing both sides of the equation by the coefficient of octane (2):

2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)

Dividing by 2, we get:

C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)

The simplified mole ratio of octane to carbon dioxide is therefore 1:8.

4. The simplified mole ratio of oxygen to octane can be determined in the same way, by dividing both sides of the equation by the coefficient of octane:

2C8H18(g) +25O2(g) → 16CO2(g) + 18H2O(l)

Dividing by 2, we get:

C8H18(g) + 12.5O2(g) → 8CO2(g) + 9H2O(l)

The simplified mole ratio of oxygen to octane is therefore 12.5:1.

Learn more about octane here https://brainly.com/question/29657423

#SPJ1

what relative masses of dimethyl amine and dimethyl ammonium chloride do you need to prepare a buffer solution of ph = 10.54?

Answers

To prepare a buffer solution of pH = 10.54, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.

A buffer solution is a solution that has the ability to resist changes in pH upon the addition of small amounts of acid or base. A buffer solution contains a weak acid and its conjugate base or a weak base and its conjugate acid. It can be prepared by mixing equal volumes of a weak acid and its conjugate base or a weak base and its conjugate acid.

Dimethyl amine is an organic compound with the formula (CH3)2NH. It is a weak base and can act as a proton acceptor. Dimethyl ammonium chloride is an organic compound with the formula (CH3)2NH2Cl. It is a salt of a weak base and a strong acid and can act as a proton donor.

Calculation of relative masses:

The pKa of dimethyl amine is 10.73.

To prepare a buffer solution of pH = 10.54,

the ratio of [A-]/[HA] should be 1/9.

Using the Henderson-Hasselbalch equation;

pH = pKa + log([A-]/[HA])10.54 = 10.73 + log([A-]/[HA])

log([A-]/[HA]) = -0.19[A-]/[HA] = 0.67/1.00

The sum of the masses of dimethyl amine and dimethyl ammonium chloride is 0.146 g. The ratio of their masses is 0.67:1.00.

So, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.

To know more about Buffer solution refer here :

https://brainly.com/question/13076037

#SPJ11

Preparations of lead compounds and percentage yield

Answers

A chemical substance or natural product known as a lead compound has biological action against a pharmacological target.

A critical phase of the drug discovery program is lead identification and optimization.

There are two main oxidation states for compounds containing lead: +2 and +4. The first is more typical. Strong oxidants or only occurring in extremely acidic conditions are typical characteristics of inorganic lead(IV) compounds.

The percent yield equation is:

percent yield = actual yield/theoretical yield x 100%

The ratio of the actual yield to the theoretical yield multiplied by 100 is the percent yield.

Characterizing natural products, using combinatorial chemistry, or using molecular modeling as in rational drug design are methods for finding lead compounds. Lead compounds can also be made from substances that high-throughput screening identified as hits.

To know about yield

https://brainly.com/question/2506978

#SPJ4

identify the beaker that best represents a saturated solution. assume all the solutions are at the same temperature.

Answers

The beaker that best represents a saturated solution is the one in which the solution is at its maximum level of solubility, meaning it cannot dissolve any more solute at the same temperature.

Saturated solutions are solutions in which no more solute can dissolve in the solvent at the same temperature. A solution is a homogeneous mixture composed of a solvent and a solute.

The solvent is the major component of the solution, and the solute is the minor component. The solute dissolves in the solvent to create a homogeneous solution.

A solution is said to be saturated when it has the maximum amount of solute that can dissolve in it at the same temperature. If the temperature changes, the solubility of the solute will also change, and the solution will become unsaturated or supersaturated.

Learn more about saturated https://brainly.com/question/388072

#SPJ11

Calculate the [H3O+] and the pH of a 0.140 M H3C6H5O7 solution.

Answers

The [H₃O+] and the pH of a 0.140 M H₃C₆H₅O₇ solution is [H₃O+] = 1.49 ×[tex]10^-3[/tex]M, and pH = -log[H₃O+] = 2.83.

H₃C₆H₅O₇ is a weak acid, so we need to use the acid dissociation constant (Ka) to calculate the [H₃O+] and pH of its solution. The Ka for H₃C₆H₅O₇ is 6.3 × [tex]10^-5.[/tex]

The balanced chemical equation for the dissociation of H₃C₆H₅O₇ in water is:

H₃C₆H₅O₇ + H2O ⇌ H3O+ + H₃C₆H₅O₇-

At equilibrium, let x be the concentration of H₃O+ and H₃C₆H₅O₇-. Then:

Ka = [H₂O+][ H₃C₆H₅O₇-] / [H3C6H5O7]

Ka = [tex]x^2[/tex]/ (0.140 - x)

Assuming that x is much smaller than 0.140, we can simplify this equation to:

[tex]x^2[/tex] = Ka × 0.140

x = √(Ka × 0.140)

x = √(6.3 × [tex]10^-5[/tex]× 0.140)

x = 1.49 × [tex]10^-3[/tex]M

solution is a homogeneous mixture of two or more substances that are uniformly dispersed throughout the mixture. The substance that is present in the largest amount is called the solvent, and the substances that are dissolved in the solvent are called solutes.

Learn more about solution here:

https://brainly.com/question/30665317

#SPJ4

which enzyme is used to break down triacylglycerol into fatty acids and glycerol?

Answers

Triacylglycerol is broken down by the enzyme lipase into fatty acids and glycerol. It is released by the pancreas and other digestive organs and is essential to the body's ability to digest and absorb fats.

Lipase is the enzyme that converts triacylglycerol into fatty acids and glycerol. The pancreas and other digestive organs release lipase, which is essential for the breakdown and absorption of fats in the body. Triacylglycerols are a kind of lipid that is frequently present in meals including meat, dairy goods, and oils. The triacylglycerol molecule's fatty acid ester linkages are hydrolyzed by lipase, releasing the molecules' separate fatty acids and glycerol. The body's cells can utilize these smaller parts for energy or store them as fat when they are absorbed into the circulation and delivered there. Other lipids, including phospholipids and cholesterol esters, are also broken down by lipase. and is essential for maintaining proper lipid metabolism and homeostasis in the body.

learn more about Triacylglycerol here:

https://brainly.com/question/29697122

#SPJ4

How many molecules of oxygen are produced by the decomposition of 6. 54 g of potassium chlorate (KCLO3)?

Answers

The breakdown of 6.54 g of potassium chlorate results in the production of 4.81 x [tex]10^{22}[/tex]oxygen molecules.

The balanced chemical equation for the decomposition of potassium chlorate is:

2 KClO3(s) → 2 KCl(s) + 3 O2(g)

This equation tells us that for every 2 moles of potassium chlorate that decompose, 3 moles of oxygen gas are produced.

To determine the number of molecules of oxygen produced by the decomposition of 6.54 g of potassium chlorate, we first need to convert the mass of potassium chlorate to moles using its molar mass. The molar mass of KCLO₃ is:

K: 39.10 g/mol

Cl: 35.45 g/mol

O: 3(16.00 g/mol) = 48.00 g/mol

Total molar mass of KCLO₃: 39.10 + 3(35.45) + 48.00 = 122.55 g/mol

Number of moles of KCLO₃ = 6.54 g / 122.55 g/mol = 0.0533 mol

Now we can use the mole ratio from the balanced equation to calculate the number of moles of oxygen produced:

3 moles O₂ / 2 moles KCLO₃ = x moles O₂ / 0.0533 moles KCLO₃

x = 3/2 x 0.0533 = 0.0799 moles O₂

Finally, we can convert the number of moles of oxygen to the number of molecules using Avogadro's number:

Number of molecules of O2 = 0.0799 mol x 6.022 x [tex]10^{23}[/tex] molecules/mol = 4.81 x [tex]10^{22}[/tex] molecules

Therefore, 4.81 x [tex]10^{22}[/tex] molecules of oxygen are produced by the decomposition of 6.54 g of potassium chlorate.

To learn more about  molecules  refer to:

brainly.com/question/14646440

#SPJ4

citation chaining is a process for finding more articles that may be relevant for your research topic. which of these would be a good starting point for this process?

Answers

A good starting point for citation chaining would be a relevant and well-cited article or book that directly relates to your research the topic.

This article or book should have a comprehensive bibliography or  the reference list that you can use to find additional sources. By examining the references cited in the original article, you can identify the other articles and books that are likely to be relevant to your research. Then, you can examine the references in those articles to find even more sources, continuing the process until you have a comprehensive set of relevant sources for your research.

To know more about citation chaining, here

brainly.com/question/29413043

#SPJ4

label each reactant and product in this reaction as a brønsted acid or base.CH3OH + OH- ----> CH3O- + H2Obaseacid

Answers

Methanol, or CH3OH, is a Brnsted-Lowry base in this reaction because it can receive a proton from the hydroxide ion, or OH-, to generate CH3O- (methoxide ion).

The Brnsted-Lowry base OH- (hydroxide ion), on the other hand, may transfer a proton (H+) to[tex]CH3OH[/tex]to create H2O. (water).So the reactants are CH3OH (base) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).I apologize for the mistake in my previous response. You are correct that methanol, or CH3OH, is a Brønsted-Lowry acid in this reaction because it donates a proton (H+) to the hydroxide ion (OH-) to form CH3O- (methoxide ion). The hydroxide ion (OH-) is a Brønsted-Lowry base because it accepts a proton (H+) from CH3OH to form H2O (water). Therefore, the reactants are [tex]CH3OH[/tex]  (acid) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).

learn more about Methanol, or CH3OH here:

https://brainly.com/question/14278895

#SPJ4

Other Questions
PLS HELP I WILL MARK BRAINILEST if an anonymous online user commits defamation against an individual or business, may that individual or business compel the internet service provider to reveal the identity of the user? sap businessobjects business intelligence platform administrator guide is called nelson mandela was the first black president of south africatrue or false a 108-watt light bulb is left on for 28 hours. how much did it cost to operate the light bulb if electricity costs 0.04 dollars per kwh? The nurse is discussing sexual intimacy with a pregnant couple. What should be included in the teaching plan?1. Intercourse should stop by the beginning of the third trimester.2. Breast fondling should be discouraged due to the potential for preterm labor.3. The couple might need to experiment with different positions.4. Use vaginal lubricant sparingly Adam is raising pigs on their farm. They need to build a rectangular pen for their pigs, and want the pen to have as much area as possible. However, they only have 180 feet of fencing.(a) Draw a diagram showing the rectangular pen and label the length of one of the sides of the pen with the variable t.Explain in 200 word Draw the lewis structure for NO2- including any valid resonance structures. which of the following statements are true?a. the nitrite ion contains 2 N-O bonds that are equivalent to 1 1/2 bonds.b. the nitrite ion contains 2 N=O double bondsc. the nitrite ion contains 1 N-O single bond and one N=O double bondd. the nitrite ion contains 2 N-O single bondsthe answer is A, but I don't understand why T/F for two series of 20 trials, average reaction times will be faster for the series when the foreperiods are a constant length of time compared to when the foreperiods are varied lengths of time. Coin A is tossed three times and coin B is tossed two times. What is the probability that more heads are tossed using coin A than coin B? Help asap! Using your knowledge of the novel Frankenstein, fill in the words that help tell the story. I will give brainliest award Use the following information for the year ended December 31, 2022.Supplies$1,300Service revenue$21,500Operating expenses10,400Cash15,600Accounts payable11,500Dividends6,600Accounts receivable3,300Notes payable1,900Common stock9,000Equipment11,300Retained earnings (beginning)4,600Calculate the following: (Enter loss using either a negative sign preceding the number e.g. -45 or parentheses e.g. (45).)Net income / (net loss)$enter a dollar amountEnding retained earnings$enter a dollar amountTotal assets$enter a dollar amount Which of the following may the president do to control the implementation of a policy agenda?A The president can veto particular items or language in a bill he disagrees with while enacting the remainder of the billB The president can veto a congressional bill that has passed the House and the SenateC The president can refuse to spend money that Congress appropriatedD The president can impeach selected members of CongressWhich of the following may the president do to control the implementation of a policy agenda?A The president can veto particular items or language in a bill he disagrees with while enacting the remainder of the billB The president can veto a congressional bill that has passed the House and the SenateC The president can refuse to spend money that Congress appropriatedD The president can impeach selected members of Congress Sunlight enables the synthesis of glucose from carbon dioxide by providing the ____that is necessary for the process. sort each statement below into the appropriate bin based on whether it is something that scientists knew about pluto or its moon charon before the new horizons flyby, is something learned as a result of the new horizons flyby, or is something that seems possible from the new horizons mission but for which we'll need additional data to establish it with certainty. Suppose you were a mill worker in Lowell in the mid-1800s like the girl from the video. You are keeping a diary of your experiences. Write one entry to describe your feelings and experiences as soon after you arrived in Lowell - 3 sentences.Write a second entry to describe your feelings and experiences a year later - 3 sentences. Include factual details in your entries.Start each one out like this:Date: Month / Day / Year (Usebetween the years 1820 - 1840s)Dear Diary or Dear Journal...3 sentencesSincerely,Your Name the founders decided that revenue bills should originate in the house because what is the largest integer $n$ such that $3^n$ is a factor of $1 \times 3 \times 5 \times \dots \times 97 \times 99$? Sabal was being called by kirti active voice BANK2 For 4 months, you have withdrawn $25 a month from your savings account. Your accountbalance is now $75. Write an equation to represent your money(y) at any time(x).