The order of bond length from shortest to longest is as follows: SO42-, SO32-, SOZ, OSO3, 3042-.
This order can be determined by analyzing the number of oxygen atoms bonded to the sulfur atom in each molecule. The more oxygen atoms bonded to the sulfur atom, the shorter the bond length.
SO42- has the shortest bond length because it has four oxygen atoms bonded to the sulfur atom, resulting in strong electrostatic attraction and a shorter bond length. SO32- has three oxygen atoms bonded to the sulfur atom, making its bond length longer than SO42-. SOZ has two oxygen atoms bonded to the sulfur atom, making its bond length longer than SO32-.
OSO3 has a bond length longer than SOZ because it contains two sulfur atoms with a double bond between them, resulting in a longer bond length. Lastly, 3042- has the longest bond length because it has four oxygen atoms bonded to two sulfur atoms, resulting in weaker electrostatic attraction and a longer bond length. In conclusion, the order of bond length from shortest to longest is SO42-, SO32-, SOZ, OSO3, 3042-.
Know more about Bond Length here:
https://brainly.com/question/31625763
#SPJ11
can anyone help with this question?
If the wight of copper metal is 130.42 then molar mass of cu 63.546 u.
what is 1 mole?The International Unit System uses the mole (symbol: mol) as the measure of material quantity. How many basic entities of a specific drug are present in an object or sample is determined by the quantity of that material. It is specified that the mole comprises precisely 6.022140761023 elementary entities.
How can the molarity of Cu be determined?The average atomic mass of the element copper, which appears on the periodic table as 63.55 AMU, can be used to calculate its molar mass. The SI symbol of mole is mol.
To know more about moles visit:
brainly.com/question/26416088
#SPJ1
are done.
__C2H2 +
__0₂
__CO₂ +
__H₂O
The balanced equation is, 2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O.
How can the equation be balanced?The reaction's balanced equation is as follows.
C₂H₂+O₂ → CO₂+H₂O
Water and carbon dioxide gas are created when dimethyl ether and oxygen combine.
Following is the reaction's balanced chemical equation:
2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O.
Three moles of water and two moles of carbon dioxide gas are produced in this reaction when one mole of dimethyl ether combines with two moles of oxygen gas.
According to the law of conservation of mass, the mass of the reactants and products in a chemical reaction should be equal. As a result, each element's number of atoms stays constant throughout the chemical reaction. As a result, the chemical equation that represents the chemical process needs to be balanced. A chemical equation is considered to be balanced when the sum of the atom counts on the reactants and products sides equals one.
To learn more about balance equation refers to;
brainly.com/question/7223459
#SPJ1
Complete question -
Balance the given equation -
__C2H2 + __0₂ → __CO₂ + __H₂O
Cae-2 - Reeta wa feeling thirty but there wa only a pot of water at home which wa muddy and unfit for drinking. How do you think Reeta would have made thi water fit for drinking if the following material were available to her? Alum, tub, mulin cloth, ga tove, thread, pan and lid. Brainly
Reeta could have made the water which is fit for drinking purposes using the materials available to her.
With the available materials, Reeta would have taken the following steps to purify water.
Firstly, she can filtered the muddy water with the help of a muslin cloth, which is mainly used for the purification purposes. Now, she has to tie a piece of Alum with the help of a thread and submerge it in water and then leave the water which is undisturbed for some time. After resting, the impurities will finally settle down at the bottom and the water from the top can be drained off. Now she has to boil the discarded water for 10 minutes by covering it with the pan and making it cool down followed by filtering the water. And finally, the water will be purified with filtration that will make it fit for drinking purpose.
To know more about impurities here
https://brainly.com/question/14737604
#SPJ4
how can different parts of the sun rotate at different speeds
Answer:
Because unlike Earth and other solid objects, the entire Sun doesn't rotate at the same rate. Because the Sun is not solid, but is instead a giant ball of gas and plasma, different parts of the Sun spin at different rates. The interior of the Sun does not spin the same way as does its surface.
In your own words define law of conservation of energy
Answer: Energy cannot be created or destroyed it can only be transformed and used to make other forms of energy.
Explanation:
List several pieces of information you can determine about a chemical reaction just by reading the chemical equation.
Chemical reactions are the processes by which a material or substances change to create new compounds with new attributes.
What does "chemical reaction" mean?Through its symbols and equations, a chemical equation reveals information about the reactants and products. the proportion of reactants to molecules. The relative masses of reactants and products are taken into account when molecular masses are represented in grams as "Unified Masses" (U).
as an example of a chemical process:When one or more chemicals transform into one or more other compounds, a chemical reaction takes place. For instance, the reaction between vinegar and baking soda produces sodium acetate, carbon dioxide, and water, and the reaction between iron and oxygen results in rust.
To learn more about chemical reaction refers to;
https://brainly.com/question/29762834
#SPJ4
Draw a chiral aldehyde with the formula C3H5BrO.
You do not have to explicitly draw H atoms. In cases where there is more than one answer, just draw one.
The structure of chiral aldehyde with the formula C3H5BrO would have an aldehyde group at C1 atoms and Br attached to the terminal C atom of the chain.
An organic substance with a -CHO functional group is an aldehyde. We can start by drawing a linear chain with the substituents and then draw branched carbon chains at non-equivalent carbon atoms to create all the structures. According to the nomenclature rules for organic compounds, C3H5BrO can be named as 2-bromopropanal or 2-bromo-propionaldehyde. This compound will have an aldehyde group at C1 and a methyl group and a halide group attached to C2 atom of the chain.
Aldehydes are recognised as organic substances because they have a -CHO functional group. It has a carbonyl centre, which implies that a carbon atom will form a double bond with an oxygen atom and that the same carbon centre is joined to an alkyl group or additional hydrogen atoms.
To know more about resonance structures, refer to the following link:
https://brainly.com/question/419650
#SPJ4
A 13. 1-g ample of ice at −17. 9°C i mixed with 103. 5 g of water at 73. 0°C. Calculate the final temperature of the mixture auming no heat lo to the urrounding. The heat capacitie of H2O() and H2O(l) are 2. 03 and 4. 18 J/g·°C, repectively, and the enthalpy of fuion for ice i 6. 02 kJ/mol
The final temperature of the mixture can be considered as 73°C.
To calculate the final temperature of the mixture, we need to use the heat capacity and the enthalpy of the melting of water. The heat capacity of water is the amount of heat required to raise 1 gram of water by 1 degree Celsius. Melting enthalpy is the amount of heat required to melt one mole of a solid at its melting point.
First, calculate the total heat absorbed in the process of melting the ice. The heat absorbed by ice is equal to the heat capacity of the ice multiplied by the mass of the ice and the change in temperature.
Qice = (mass of ice) x (heat capacity of ice) x (change in temperature)
Qice = (13.1 g) x (2.03 J/g·°C) x (17.9°C - (-17.9°C))
Qice = 13.1 g x 2.03 J/g·°C x 35.8°C = 4,849.8 J
We can also calculate the total heat absorbed by the water during the increase in temperature. The heat absorbed by the water is equal to the heat capacity of water multiplied by the mass of the water and the change in temperature.
Qwater = (mass of water) x (heat capacity of water) x (change in temperature)
Qwater = (103.5 g) x (4.18 J/g°C) x (73.0°C - 0°C)
Qwater = 103.5 g x 4.18 J/g°C x 73.0°C = 30,529.1 J
The final temperature of the mixture can be found by using the total heat absorbed by the ice and water, and the heat of fusion.
The final temperature of the mixture is approximately equal to the temperature of the water before mixing (73.0°C) because the heat absorbed by the ice during melting is much smaller than the heat absorbed by the water during heating.
Q total = Q ice + Q water + heat of fusion
Q total = 4,849.8 J + 30,529.1 J + 6,02 kJ/mol x (13.1g / 18g/mol)
Now we can solve for the final temperature:
Final temperature= Q total / (mass of mixture * heat capacity of water)
The final temperature of the mixture can be considered as 73°C.
Learn more about specific heat and enthalpy changes in a system involving phase changes here: https://brainly.com/question/13076928
#SPJ4
Please help
C6H12O6 + 602 → 6CO2 + 6H₂O
Which set of reactants will be the
most efficient (least wasteful of
materials) for the reaction?
The most efficient set of materials would be 0.5 mol of [tex]C_6H_{12}O_6[/tex] and 3.0 mol of [tex]O_2[/tex]. Option D.
Mole ratio of reactantsFrom the balanced equation of the reaction illustrated in the image, the mole ratio of [tex]C_6H_{12}O_6[/tex] to [tex]O_2[/tex] is 1:6. In other words, for every 1 mole of [tex]C_6H_{12}O_6[/tex] that is consumed in the reaction, 6 moles of [tex]O_2[/tex] is required for a complete reaction.
In order for the reaction to remain efficient without any of the reactants remaining after the reaction, the mole ratio of the 2 reactants has to be maintained.
Thus:
1.5:3.0 does not equate to 1:61.0:30 does not equate to 1:63.0:6.0 does not equate to 1:60.5:3.0 equates to 1:6In other words, only 0.5 mol of [tex]C_6H_{12}O_6[/tex] and 3.0 mol of [tex]O_2[/tex] will leave no leftovers after the reaction.
More on mole ratios can be found here: https://brainly.com/question/15288923
#SPJ1
Use the variational method to obtain an upper limit for the ground state energy of the He atom using as trial function
However, the variational technique yields all states, but the trial function method does not (unless your trial function space contains the exact excited states).
Variational method: what is it?A mathematical technique called the variational approach is used to roughly compute the energy levels of challenging quantum systems. A solvable system's energies may also be roughly estimated using this technique, and the correctness of the method can then be determined by comparing the approximated and known energies.
E [ | ψ ⟩,⟨ψ |] =⟨ψ|H|ψ⟩−λ(⟨ψ|ψ⟩−1).
To calculate the variation, one uses the formula: E=|H|+|H|||.
Please take note that we regard | and | as independently variable.)
This indicates that the functional is stationary for the following: H|=|.
To learn more about variational method refers to;
brainly.com/question/29233712
#SPJ4
What are the 4 types of verbal?
Interpersonal verbal communication, Intrapersonal, small group communication and Public communication are the four types of verbal communication.
You could find it easier to express your ideas, thoughts, feelings, and experiences by using various verbal communication techniques. You can use this to consider your personal strengths. You might describe yourself as tenacious, cooperative, or patient, for instance. It's critical to communicate your strengths, priorities, and expectations to others, especially if you plan to collaborate with them. Team members that are familiar with your working style and skill set may aid in your transition to your new position.
To look more about verbal communication click here
brainly.com/question/10958146
#SPJ4
5. Why would a measurement be reported as 18.0 mL instead of 18 mL?
Answer:
A measurement may be reported as 18.0 mL instead of 18 mL to indicate that it has been measured with greater precision.
The decimal point in 18.0 mL indicates that the measurement was taken to the tenths place, meaning that the actual measurement is between 17.5 mL and 18.4 mL. On the other hand, 18 mL implies that the measurement is between 17.5 mL and 18.9 mL.
Therefore, the use of the decimal point in this case is a way to indicate that the measurement has a higher degree of precision. It is used as a way to communicate that the measurement was taken with greater accuracy and that the number has been rounded to the nearest tenth.
A measurement may be reported as 18.0 mL instead of 18 mL to indicate that it is an exact or precise measurement, rather than an approximation. In scientific experiments or laboratory work, measurements are often reported with a certain number of significant figures, which reflect the precision of the measurement.
In this case, 18.0 mL has one decimal point and implies that the measurement was made to the nearest 0.1 mL, whereas 18 mL doesn't have a decimal point and implies that the measurement was made to the nearest mL.
Additionally, in some cases, the trailing zero after a decimal point is used to indicate the accuracy of the measurement and to make it clear that it is not a rounded number.
If we react 10 moles of hydrogen with 6 moles of oxygen. what is the limiting reagent and how much water is produced?
The weight of hydrogen is equal to moles multiplied by the molar mass since we are asked to determine its weight. It will be 24 grammes because that is 2, thus this is 24 grammes.
How many moles of CO2 are produced from 6 moles of O2?The mole ratio of O2 to CO2 is 1:1 according to the equation that is balanced. Thus, the amount of CO2 created from 6 moles of O2 is equal to (1/1) x 6 mol, or 6 mol.The reaction's byproducts contain 24 oxygen atoms. In total, 6 oxygen molecules are needed for every glucose molecule in the process. The molecular formula for ATP energy is 6O2 + C6H12O6 --> 6CO2 + 6H2O.After the reaction is finished, 10 moles of water will be produced. Explanation: Water is being produced by the reaction between 10 moles of hydrogen and 6 moles of oxygen.Thus, the reaction between ten volumes of dihydrogen gas and five volumes of oxygen gas results in ten volumes of water vapour. Keep in mind the Avogadro's law, which explains how the volume and number of moles relate to one another.To learn more about moles refer to:
https://brainly.com/question/30242691
#SPJ4
71.05 g of sodium sulfate (Na2SO4) are dissolved to obtain 2 liters of standard solution. What is the concentration of a solution
Answer:
I do k .............................
A 1.0 liter flask contains 5.0 moles of a gas at 27.0°C. What is the pressure of the gas? [R-.082 L.atm/mol.k]
A) 300 atm
C) 101.3 atm
D) 123 atm
B) 0.41 atm
The pressure of the gas 123 atm.
How do you find the pressure of a gas?
Pressure is the amount of force a substance applies to another substance per unit of area. The force that the gas applies to the container boundaries is known as the gas's pressure.
Along the designated volume, the gas molecules move at random. They bump into the ground and each other throughout this movement.
The effect of each gas molecule is too small to be felt, let alone seen. However, the gas pressure is determined by the combined impact of all gas molecules
P = nRT / V
Gas constant, R-.082 L.atm/mol.k
here number of moles, n= 5 moles
temperature, T = 27°C = 300.15 kelvin
volume, V = 10 liter
Then values given in the equation P = nRT / V
the pressure of the gas P
= 5*.082*300.15/1
= 1,230.615/10
= 123 atm
To learn more about Gas Pressure related problems refer to:
https://brainly.com/question/15273514
#SPJ1
Calculate the mass of 34.2 moles of calcium carbonate
Answer:
approximately 3423 grams
Explanation:
The molecular weight of CaCO3 is 100.0869
Therefore,
Mass = 34.2 × 100.0869
= 3422.97198
calculate the number of moles of c2h4 that are actually produced in the experiment and mesaured in the gas collection tube
35.7 x 1atm/760 torr = 0.0470 atm
P(ethene) = P(total) - P(water) = 0.822atm - 0.0470atm = 0.775atm
n= PV/RT = (0.775atm)(0.0854L)/(0.08206L atm mol-1 K-1)(305K) = 0.00264mol.
What is moles?Mole, also spelled mol, in chemistry, a standard scientific unit for measuring large quantities of very small entities such as atoms, molecules, or other specified particles.The mole designates an extremely large number of units, 6.02214076 × 1023. The General Conference on Weights and Measures defined the mole as this number for the International System of Units (SI) effective from May 20, 2019. The mole was previously defined as the number of atoms determined experimentally to be found in 12 grams of carbon-12.The number of units in a mole also bears the name Avogadro’s number, or Avogadro’s constant, in honour of the Italian physicist Amedeo Avogadro (1776–1856). Avogadro proposed that equal volumes of gases under the same conditions contain the same number of molecules, a hypothesis that proved useful in determining atomic and molecular weights and which led to the concept of the mole.
To learn more about Avogadro’s refer to:
https://brainly.com/question/26931664
#SPJ4
To determine the concentration of an unknown solution, the technique that can be used is titration, where the solution of a known concentration is used. The titrant is added to the burette with a known volume of unknown solution till the reaction is finished.
To determine the concentration of an unknown solution, the technique that can be used is called titration.
Titration is a qualitative analysis technique which is used to calculate the unknown concentration of a given analyte in a solution.
In this process, a standard solution of known concentration and volume is taken(titrant). This solution is then allowed to react with the analyte until the endpoint attained.
In the first step of this procedure, a small amount of the analyte is added to a conical flask or a beaker, followed by the addition of a small amount of indicator. This is then placed under the burette containing the standard solution or titrant.
Small volumes of titrant are added to the analyte dropwise until a permanent colour change is observed on reaching the end point.
To know more about titration here
https://brainly.in/question/54340574
#SPJ4
When phosphate rock is treated with nitric acid-soluble salts are produced that can be used as fertilisers. Give the TWO substances produced when nitric acid reacts with phosphate salt.
Answer:
Phosphoric acid and sodium nitrate.
Explanation:
The balanced chemical equation for the reaction between nitric acid (HNO3) and phosphate salt (Na3PO4) is:
3 HNO3 + Na3PO4 → H3PO4 + 3 NaNO3
The products of this reaction are phosphoric acid (H3PO4) and sodium nitrate (NaNO3). Therefore, they are the two substances produced as a result of this reaction.
I hope this helps!
The two substances produced during chemical change is Phosphoric acid and sodium nitrate.
What is chemical change?
Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical change,here:
https://brainly.com/question/23693316
#SPJ2
Identify one way to improve models of electron dot structure
Electron dot structures or Lewis dot structures can be improved by adding valence electrons of each atom and then representing them in form of dots.
What are Lewis dot structures?Lewis dot structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .
They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.
They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.
Learn more about Lewis dot structures,here:
https://brainly.com/question/20300458
#SPJ1
What is the number of ammonia molecules made when 6 grams of hydrogen gas reacts with excess nitrogen?
4 moles of ammonia molecules can be made when 6 grams of hydrogen gas reacts with excess nitrogen.
[tex]N_{2}[/tex](g) + 3[tex]H_{2}[/tex](g) → [tex]2NH_{3}[/tex](g)
1 mole of [tex]N_{2}[/tex] reacts with 3 moles of [tex]H_{2}[/tex]
Therefore, 6 moles of [tex]N_{2}[/tex] will react with 18 moles of [tex]H_{2}[/tex]
[tex]H_{2}[/tex] + 6 no. of moles. ( Hydrogen is a limiting reagent).
No. of moles of ammonia are formed when 3 moles of [tex]H_{2}[/tex] will react with excess of [tex]N_{2}[/tex] = 2
No. of moles of ammonia are formed when 6 moles of [tex]H_{2}[/tex] will react with excess of [tex]N_{2}[/tex] = 2/3×6 = 4
Therefore, it is a gaseous equation (all the reactants as well as products are gases).
To know more about molecules here
https://brainly.com/question/19922822
#SPJ4
(scientific reason)
If the temperature increases, then the concentration of sodium hydroxide (NaOH) will decrease....
why's that pls help begging
If the temperature increases, then the concentration of sodium hydroxide (NaOH) will decrease because the equilibrium will shift in the backward direction.
What is sodium hydroxide ?Sodium hydroxide is an ionic compound consisting of Na⁺ and OH⁻. It is also called as caustic soda. It is an inorganic compound with chemical formula NaOH.
When NaOH dissolve in water it is exothermic in nature. As the temperature increases, the equilibrium will shift in the backward direction.Therefore,as to nullify the effect of increased temperature. It will decrease the solubility of NaOH in water.
Thus, If the temperature increases, then the concentration of sodium hydroxide (NaOH) will decrease.
To learn more about sodium hydroxide, follow the link;
https://brainly.com/question/29327783
#SPJ1
Draw (on paper) a Lewis diagram for CH3CH2CH2OH
Use your diagram to answer the following questions.
The number of C-H bonds =
The number of O-H bonds is
The number of C-C single bonds =
The number of C-O single bonds =
The total number of lone pairs =
The structure of ethanol is shown below. As a result, the molecule CH3CH2OH C H 3 C H 2 O H is polar. Both a Lewis acid and a Lewis base, CH3CH2OH C H 3 C H 2 O H, can function.
Due to the oxygen atom's lone pair of electrons, it is primarily a Lewis base. The most polar of these is the O-H bond. The difference in electronegativity between the two atoms involved can be used to explain it. Ethanol, with the chemical formula CH3 CH2 OH, contains hydrogen bonds. Covalent bonds between hydrogen atoms produce hydrogen bonds. However, CH3CH2OH alone displays hydrogen bonding, which is substantially stronger than the intermolecular forces that are present in the other options.
To find more on atoms, refer here:
https://brainly.com/question/17545314
#SPJ4
Using the Lewis diagram, I was able to determine that: 1) there are 7 C-H bonds, 2) there are 1 O-H bonds, and 3) The C-C bond count is 2, 4) The C-O bond count is 1, 5) There are 2 lone pairings.
Lewis diagram, often referred to as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures (LEDS), are diagrams that depict the interactions of atoms in molecules as well as any lone pairs of electrons that may be present. Any covalently bound molecule, as well as coordination compounds, can be represented by a Lewis structure. Gilbert N. Lewis introduced the Lewis structure in his 1916 essay The Atom and the Molecule, and it bears his name. By adding lines between atoms to indicate shared pairs in a chemical bond, Lewis structures expand on the idea of the electron dot diagram.
learn more about Lewis diagram here:
https://brainly.com/question/16659675
#SPJ4
Which flask has the highest
pressure, assuming they all contain
1 mole He at 298K?
Answer: d 1.0l
Explanation:
A science teacher adds water to a strong acid for use in the lab with students. this makes the concentration_____, because the amount of solute per volume of solvent_____.
A powerful acid is made into a solution by a science instructor so that pupils can use it in the lab. This weakens the concentration since there is less solute per quantity of liquid.
Exactly what is an acid?A substance is considered an acid if it produces a sour taste in water solution, turns blue litmus paper red, reacts with the some metals to release hydrogen, reacts chemically bases and form salts, and encourages chemical reaction.
Which of these three acids are they?Typically, acids can be categorized into three main groups. Binary acid comes in first, followed by oxyacid and carboxylic acid, respectively. All of the names of binary acids begin with "H-A," which stands for a hydroxyl group to a nonmetal atom.
To know more about acid visit:
https://brainly.com/question/14072179
#SPJ4
Answer:
weaker
decreases
Explanation:
edge 2023
HELP!!!!!!!! This question is rlly confusing!!!!
The forms of heat transfer and examples of them when matched, are:
Conduction:
Touch transfers heat Earth warms airConvection :
Warm air rises Liquid / gas transfer heatRadiation
Sun heats Earth Waves transfer heat What are the forms of heat transfer ?There are three main forms of heat transfer:
Conduction: This is the transfer of heat through a solid material. Heat is conducted through the material by the collision of atoms and molecules. Touch therefore transfers heat.
Convection: This is the transfer of heat by the movement of a fluid or gas. In convection, heat is transferred by the movement of the fluid or gas itself.
Radiation: This is the transfer of heat by electromagnetic waves, such as infrared radiation. Radiation does not require a medium for heat transfer and can occur in a vacuum. The sun's energy reaches the Earth through radiation, and heat from a fire can also be felt by radiation.
Find out more on forms of heat transfer at https://brainly.com/question/27673846
#SPJ1
Please answer the questions in the picture below
Answer b
Explanation:
Describe in detail the 3 different plate boundaries. This should be 5 to 6 sentences long and using your best grammar.
Paleomagnetism, The strength and direction of the earth's magnetic field at the time the rocks formed are preserved in many rocks.
Which rocks are mainly responsible for magnetism? Mostly in rocks that are igneous. Iron and other magnetic minerals can move and align with the planet's magnetic polarity when in the liquid stage of magma. These minerals are trapped in their original positions after the magma cools.Because minerals cannot move once they are cooled, this alignment reveals the polarity of the Earth's magnetic fields at the time the rock formed.Laterally deposited igneous rock layers will exhibit various mineral orientations and demonstrate how the planet's magnetic fields altered over time.The rocks include records of previous magnetic field reversals. Iron-rich minerals that function as small magnets are found in many rocks. These minerals start to develop as magma or lava cools.The magnetic minerals floating in the molten mass align themselves with the magnetic field because the molten rock has not yet fully hardened. These minerals "lock in" the magnetic field as numerous small compasses when the rock ultimately forms.To learn more about grammar sentences refer to:
https://brainly.com/question/28885773
#SPJ4
How many grams of potassium chloride (KCI are needed to prepare 0.750 L of a 150 M solution of potassium chloride in water?
The grams of potassium chloride (KCI are needed to prepare 0.750 L of a 150 M solution of potassium chloride in water is the
83.81 g.
Given that :
Molarity of the KCl = 1.50 M
Volume of the potassium chloride = 0.750 L
The Molarity expression is given below :
Molarity = moles / volume in L
moles = Molarity × volume
moles = 1.50 × 0.750
moles = 1.125 mol
molar mass of the KCl = 74.5 g/mol
Mass of the KCl = moles × molar mass
Mass of the KCl = 1.125 × 74.5
= 83.81 g
Thus, the mass of KCl is 83.81 g
To learn more about moles here
https://brainly.com/question/26416088
#SPJ4
A sealed vessel contains 0. 200 mol of oxygen gas, 0. 100 mol of nitrogen gas, and 0. 200 mol of argon gas. The total pressure of the gas mixture is 5. 00 atm. The partial pressure of the argon is responses 0. 200 atm 0. 200 atm 0. 500 atm 0. 500 atm 1. 00 atm 1. 00 atm 2. 00 atm 2. 00 atm 5. 00 atm.
Answer:
Below
Explanation:
Each exerts pressure proportional to its fraction of the total
total = .200 + .100 + .200 = .500 mol
argon is .200 of this
.200 / .500 * 5 atm = 2 atm