plato de Leonardo tiene 0.2 kg de arroz y el de su hermana Leticia tiene 0.3 kg si quieren que los dos tengan lo mismo y los juntan para después repartirse los en partes iguales cuánto tendrá cada plato​

Ashley would need to babysit for at least 9 hours in order to earn enough money to buy the ski pass.

Let's assume that Ashley can babysit for h hours.

Given that she wants to buy a ski pass for $80 and currently she has only $26.

Therefore, she needs an additional amount of $80 - $26

= $54.

Ashley can earn $6 per hour to babysit.

Therefore, the inequality that represents the number of hours (h)

Ashley could babysit to earn at least enough money to buy the ski pass is:

6h ≥ 54

If Ashley works h hours as a babysitter and earns $6 per hour, she will earn 6h dollars.

She needs to earn at least $54, so the inequality becomes 6h ≥ 54.

This inequality can be solved to find the possible values of h that satisfy it:

6h ≥ 54 h ≥ 9

Therefore, Ashley would need to babysit for at least 9 hours in order to earn enough money to buy the ski pass.

To know more about inequality visit:

https://brainly.com/question/20383699

#SPJ11

True. Triangulation can be used to find the location of an object by measuring the angles.

Triangulation is a method used to determine the location of an object by measuring the angles between the object and two or more reference points whose locations are known.

This method is widely used in surveying, navigation, and various other fields.

By measuring the angles, the relative distances between the object and the reference points can be determined, and then the location of the object can be calculated using trigonometry.

Triangulation is commonly used in GPS systems, where the location of a GPS receiver can be determined by measuring the angles between the receiver and several GPS satellites whose locations are known.

Know more about triangulation here:

https://brainly.com/question/1558502

#SPJ11

1) 0.080 grams of 226Ra would remain after 17,000 years.

2) 44.000 grams of 226Ra would remain after 1,700 years.

To calculate the remaining amount of a radioactive isotope after a certain time, we can use the formula:

[tex]N(t) = N₀ * (1/2)^{(t / T_{ \frac{1}{2}} )}[/tex]

Where:

N(t) is the remaining amount of the isotope after time t.

N₀ is the initial amount of the isotope

[tex]T_{ \frac{1}{2} }[/tex] is the half-life of the isotope

Let's calculate the remaining amount of 226Ra for the given time periods:

(1) After 1,700 years:

[tex]N(t) = 80g * (1/2)^(1700 / 1599) \\ N(t) = 80g *(1/2)^(1.063165727329581) \\ N(t) ≈ 80g * 0.550 \\ N(t) ≈ 44.000g[/tex]

(rounded to three decimal places)

Therefore, approximately 44.000 grams of 226Ra would remain after 1,700 years.

(2) After 17,000 years:

[tex]N(t) = 80g * (1/2)^(17000 / 1599) \\ N(t) = 80g * (1/2)^(10.638857911194497) \\ N(t) ≈ 80g * 0.001 \\ N(t) ≈ 0.080g [/tex]

(rounded to three decimal places)

Therefore, approximately 0.080 grams of 226Ra would remain after 17,000 years.

Learn more about radioactive isotopes here,

https://brainly.com/question/18640165

#SPJ4

The probability of selecting three marbles of the same color from the jar is 54/990, which can be simplified to 3/55

To calculate the probability of selecting three marbles of the same color, we need to consider each color separately.

The probability of selecting three red marbles can be calculated as the product of selecting the first red marble (4/11), the second red marble (3/10), and the third red marble (2/9) without replacement. This gives us (4/11) * (3/10) * (2/9) = 24/990.

Similarly, the probability of selecting three blue marbles is (3/11) * (2/10) * (1/9) = 6/990.

Lastly, the probability of selecting three green marbles is (4/11) * (3/10) * (2/9) = 24/990.

Adding up the probabilities for each color, we have (24/990) + (6/990) + (24/990) = 54/990.

Therefore, the probability of selecting three marbles of the same color from the jar is 54/990, which can be simplified to 3/55.

Learn more about adding up here: https://brainly.com/question/15488591

#SPJ11

To find f, we need to integrate the given second derivative of f twice. We start by integrating the second derivative with respect to x to obtain the first derivative:

f'(x) = ∫f ″(x) dx = 24x^(4)/4 - 18x^(3)/3 + 10x^2/2 + c_1

      = 6x^4 - 6x^3 + 5x^2 + c_1

where c_1 is a constant of integration.

Next, we integrate f'(x) with respect to x to obtain f(x):

f(x) = ∫f'(x) dx = ∫[6x^4 - 6x^3 + 5x^2 + c_1] dx

       = 6x^(5)/5 - 6x^(4)/4 + 5x^(3)/3 + c_1x + c_2

where c_2 is a constant of integration.

Therefore, the solution for f is:

f(x) = 6x^(5)/5 - 6x^(4)/4 + 5x^(3)/3 + c_1x + c_2

where c_1 and c_2 are constants of integration.

To know more about constant of integration , refer here :
https://brainly.com/question/27548709#
#SPJ11

Possible subsets of A using two elements are:

{a, b}, {a, c}, {a, d}, {a, e},

{b, c}, {b, d}, {b, e},

{c, d}, {c, e},

{d, e}

Possible arrangements of these two elements are:

ab, ac, ad, ae,

bc, bd, be,

cd, ce,

de

To learn more about subsets refer below

https://brainly.com/question/30968366

#SPJ11

Simplified results are after substitute the f(x, y) = 2x - y + 5 : (a) 3 (b) 3 (c) -15 (d) 11-y (e) 2x + 1 (f) 14

a) To evaluate f(0,2), we simply substitute x = 0 and y = 2 into the expression for f(x,y):
f(0,2) = 2(0) - 2 + 5 = 3
So, f(0,2) simplifies to 3.
b) To evaluate f(-1,0), we substitute x = -1 and y = 0:
f(-1,0) = 2(-1) - 0 + 5 = 3
So, f(-1,0) simplifies to 3 as well.
c) To evaluate f(5,30), we substitute x = 5 and y = 30:
f(5,30) = 2(5) - 30 + 5 = -15
So, f(5,30) simplifies to -15.
d) To evaluate f(3,y), we substitute x = 3 and leave y as y:
f(3,y) = 2(3) - y + 5 = 11 - y
So, f(3,y) simplifies to 11 - y.
e) To evaluate f(x,4), we substitute y = 4 and leave x as x:
f(x,4) = 2x - 4 + 5 = 2x + 1
So, f(x,4) simplifies to 2x + 1.
f) To evaluate f(5,1), we substitute x = 5 and y = 1:
f(5,1) = 2(5) - 1 + 5 = 14
So, f(5,1) simplifies to 14.

Learn more about substitute here:

https://brainly.com/question/15522128

#SPJ11

The arc of the satellite refers to the path that a satellite follows as it orbits around a celestial body such as the Earth, and is determined by the gravitational forces between the two objects.

We are given the orbital radius and angular separation between two adjacent communication satellites, and we need to find the arc length that separates them.

Here's a step-by-step explanation:

1. Given the orbital radius (r) is 8.46 * 10^7 m.
2. Given the angular separation (θ) is 4.00 degrees.
3. To find the arc length (s), we can use the formula s = r * θ, where θ should be in radians.
4. Convert the angular separation from degrees to radians: θ (radians) = θ (degrees) * (π / 180) = 4 * (π / 180) = 4π / 180 radians.
5. Calculate the arc length: s = r * θ = (8.46 * 10^7) * (4π / 180) ≈ 5.92 * 10^6 m.

So, the arc length that separates the satellites is approximately 5.92 * 10^6 m (option b).

To know more about arc of the satellite visit:

https://brainly.com/question/15185137

#SPJ11

A door is painted pink and blue. The area painted pink is 4 times that of the area painted blue. To complete the table for July and August, we need to find the changes in the water level for those months.

Given that the total change in the water level from April to August is -4.7 inches, we can use this information to find the changes in the water level for July and August.

By examining the table, we can observe that the changes in the water level for each month are cumulative. To find the changes for July and August, we need to subtract the changes from the previous months from the total change of -4.7 inches.

Let's denote the change in the water level for July as "x" inches. Then, the change for August would be (-4.7 - x) inches since the total change should add up to -4.7 inches.

We don't have specific information to determine the exact values of x and (-4.7 - x), but completing the table would involve finding reasonable values that fit the given total change.

Learn more about cumulative here:

https://brainly.com/question/28987460

#SPJ11

Evaluating this integral yields the volume of the region E.

To find the volume of the region E that lies between the paraboloid x² + y² - z=24 and the cone z = 2 = 2.1x + y, we can use cylindrical coordinates.

The first step is to rewrite the equations in cylindrical coordinates. We can use the following conversions:

x = r cos θ

y = r sin θ

z = z

Substituting these into the equations of the paraboloid and cone, we get:

r² - z = 24

z = 2.1r cos θ + r sin θ

We can now set up the integral to find the volume of the region E. We need to integrate over the range of r, θ, and z that covers the region E. Since the cone and paraboloid intersect at z = 0, we can integrate over the range 0 ≤ z ≤ 24. For a given value of z, the cone intersects the paraboloid when:

r² - z = 2.1r cos θ + r sin θ

Solving for r, we get:

r = (z + 2.1 cos θ + sin θ)/2

Since the cone intersects the paraboloid at r = 0 when z = 0, we can integrate over the range:

0 ≤ θ ≤ 2π

0 ≤ z ≤ 24

0 ≤ r ≤ (z + 2.1 cos θ + sin θ)/2

The volume of the region E is then given by the triple integral:

∭E dV = ∫₀²⁴ ∫₀²π ∫₀^(z+2.1cosθ+sinθ)/2 r dr dθ dz

Evaluating this integral yields the volume of the region E.

Learn more about paraboloid here:

https://brainly.com/question/30925041

#SPJ11

The component form of vector a⃗, rounded to the nearest hundredth, is:

a⃗ = 〈-12.99, 19.97〉

To find the component form of vector a⃗, which is expressed in magnitude and direction form as a⃗ =〈26√,140°〉, we can use the formulas for converting polar coordinates to rectangular coordinates:

x = r * cos(θ)
y = r * sin(θ)

In this case, r (magnitude) is equal to 26√ and θ (direction) is equal to 140°. Let's calculate the x and y components:

x = 26√ * cos(140°)
y = 26√ * sin(140°)

Note that we need to convert the angle from degrees to radians before performing the calculations:

140° * (π / 180) ≈ 2.4435 radians

Now, let's plug in the values:

x ≈ 26√ * cos(2.4435) ≈ -12.99
y ≈ 26√ * sin(2.4435) ≈ 19.97

Therefore, the component form of vector a⃗ is:

a⃗ = 〈-12.99, 19.97〉

To know more about vector, refer to the link below:

https://brainly.com/question/29832588#

#SPJ11

The parameterization of the ellipse in a counterclockwise manner is x = 3cos(t) y = 2sin(t) where t varies from 0 to 2π.

One common way to parameterize an ellipse is to use trigonometric functions such as sine and cosine. We can write the equation of the ellipse as:

4x² + 9y² = 36

We can then use the following parameterization:

x = 3cos(t) y = 2sin(t)

where t is the parameter that varies between 0 and 2π, traversing the ellipse once in a counterclockwise manner.

To see why this parameterization works, let's substitute x and y into the equation of the ellipse:

4(3cos(t))² + 9(2sin(t))² = 36

Simplifying this equation gives:

36cos²(t) + 36sin²(t) = 36

Which is true for any value of t. This shows that our parameterization does indeed describe the ellipse 4x² + 9y² = 36.

Furthermore, we can see that when t=0, we get x=3 and y=0, which is the starting point (3,0). As t varies from 0 to 2π, x and y will trace out the ellipse exactly once in a counterclockwise manner.

Therefore, the parameterization of the ellipse 4x² + 9y² = 36 that begins at the point (3,0) and traverses once in a counterclockwise manner is:

x = 3cos(t) y = 2sin(t)

where t varies from 0 to 2π.

To know more about parameterization here

https://brainly.com/question/14762616

#SPJ4

Therefore, we can estimate that the landfill contains approximately 1725 tons of solid waste at the end of the first 3 months of 2010.

Using the given information, we know that at t=0 (the beginning of 2010), W=1400 tons. We also know that the differential equation that models the increase in solid waste is dW/dt = 1(W-300).
To approximate the amount of solid waste at the end of the first 3 months of 2010, we need to find the value of W at t=0.25 (since t is measured in years from the start of 2010).
Using the line tangent to the graph of W at t=0, we can estimate the value of W at t=0.25. The slope of the tangent line is equal to dW/dt at t=0, which is 1(1400-300) = 1100 tons/year.
So the equation of the tangent line at t=0 is W = 1400 + 1100(t-0) = 1400 + 1100t. Plugging in t=0.25, we get W=1725 tons.
Using the given differential equation and tangent line, we estimate that the landfill contains approximately 1725 tons of solid waste at the end of the first 3 months of 2010, based on an initial amount of 1400 tons at the beginning of the year.

Therefore, we can estimate that the landfill contains approximately 1725 tons of solid waste at the end of the first 3 months of 2010.

To know more about equations visit:

https://brainly.com/question/22688504

#SPJ11

The vertical direction moved by the graph is 1 unit up

From the question, we have the following parameters that can be used in our computation:

y = 7cos(2π/7(x + 9)) + 1

A sinusoidal function is represented as

f(x) = Acos(B(x + C)) + D or

f(x) = Asin(B(x + C)) + D

Where

Using the above as a guide, we have the following:

Vertical shift = D = 1

Hence, the vertical direction of the graph is 1 unit up

Read more about sinusoidal function at

brainly.com/question/21286958

#SPJ1

To solve this problem, we can use the relationship between the sides of an isosceles right triangle. Let's denote the length of the hypotenuse as h.

The area of the triangle is given by A = (1/2) * s^2, where s is the length of the legs.

We are given that the area A is increasing at a rate of 12 square centimeters per second. So, we have dA/dt = 12.

Differentiating the area equation with respect to time, we get:

dA/dt = (1/2) * 2s * ds/dt

Since the triangle is isosceles, the two legs have the same length, so we can substitute s for both legs:

12 = s * ds/dt

Now we need to find the rate at which the length of the hypotenuse h is changing with respect to time, dh/dt.

Using the Pythagorean theorem, we know that h = sqrt(2) * s.

Differentiating the equation with respect to time, we get:

dh/dt = (d/dt)(sqrt(2) * s)

Using the chain rule, we have:

dh/dt = sqrt(2) * ds/dt

Substituting the value of ds/dt from the earlier equation, we have:

dh/dt = sqrt(2) * (12/s)

At the instant when s = sqrt(32), we can substitute this value into the equation:

dh/dt = sqrt(2) * (12/sqrt(32))

Simplifying, we have:

dh/dt = sqrt(2) * (12/4)

dh/dt = sqrt(2) * 3

Therefore, at that instant, the length of the hypotenuse of the triangle is increasing at a rate of 3 * sqrt(2) centimeters per second.

Learn more about triangle here:

https://brainly.com/question/2773823

#SPJ11

The length JL in the similar triangle is 17.5 units.

Similar triangles are the triangles that have corresponding sides in proportion to each other and corresponding angles equal to each other.

Therefore, let's use the proportional relationships to find the length JL of the triangle as follows:

Hence, using the proportion,

GH / KJ = GI / JL

Therefore,

12 / 30 = 7 / JL

cross multiply

12 JL =  210

divide both sides by 12

JL = 210 / 12

JL = 17.5 units

learn more on triangles here: brainly.com/question/30456542

#SPJ1

The required answer is: Y(s) = (4πe^(-4s) + sy(0) + y′(0)) / (s² + 16π²)

To find the Laplace transform of the solution, we first need to solve the differential equation y′′+16π2y=4πδ(t−4) with the initial conditions. Using the Laplace transform, we have:

s^2 Y(s) - s y(0) - y'(0) + 16π^2 Y(s) = 4π e^(-4s)

Applying the initial conditions y(0) = y'(0) = 0, we have:

s^2 Y(s) + 16π^2 Y(s) = 4π e^(-4s)

Factoring out Y(s), we get:

Y(s) = (4π e^(-4s)) / (s^2 + 16π^2)

Now, we can use partial fraction decomposition to simplify the expression. We can write:

Y(s) = A/(s+4π) + B/(s-4π)

Solving for A and B, we get:

A = (4π e^(-16π)) / (8π) = (1/2) e^(-16π)

B = (-4π e^(16π)) / (-8π) = (1/2) e^(16π)

Therefore, the Laplace transform of the solution is:

Y(s) = (1/2) e^(-16π) / (s+4π) + (1/2) e^(16π) / (s-4π)
To find the Laplace transform of the solution for the given initial value problem:

y′′ + 16π²y = 4πδ(t - 4)

Step 1: Take the Laplace transform of both sides of the equation.

L{y′′ + 16π²y} = L{4πδ(t - 4)}

Step 2: Apply the linearity property of Laplace transform.

L{y′′} + 16π²L{y} = 4πL{δ(t - 4)}

Step 3: Use Laplace transform formulas for derivatives and delta function.

s²Y(s) - sy(0) - y′(0) + 16π²Y(s) = 4πe^(-4s)

Since the initial conditions are not provided, let's keep y(0) and y'(0) in the equation.

Step 4: Combine terms with Y(s).

Y(s)(s² + 16π²) = 4πe^(-4s) + sy(0) + y′(0)

Step 5: Solve for Y(s), the Laplace transform of the solution y(t).

Y(s) = (4πe^(-4s) + sy(0) + y′(0)) / (s² + 16π²)

This is the Laplace transform of the solution to the given initial value problem.

to know about Laplace Transform to click on the link.

https://brainly.com/question/31481915

#SPJ11

No, the compound event does not consist of two mutually exclusive events. Two dice are rolled and the sum of the dice can be either a 5 or an 11.

When two dice are rolled, there are a total of 36 possible outcomes. The probability of getting a sum of 5 is 4/36 or 1/9 because there are four ways to get a sum of 5 (1+4, 2+3, 3+2, 4+1). Similarly, the probability of getting a sum of 11 is 2/36 or 1/18 because there are only two ways to get a sum of 11 (5+6, 6+5).

The compound event of getting a sum of 5 or 11 is not mutually exclusive because it is possible to get a sum of 5 and 11 at the same time by rolling two dice that show a 2 and a 3. The probability of the compound event is the sum of the probabilities of the individual events:

1/9 + 1/18 = 3/18 + 1/18 = 4/18 = 2/9

Therefore, the probability of getting a sum of 5 or 11 when rolling two dice is 2/9.

Learn more about Mutually exclusive

brainly.com/question/30512497

#SPJ11

Answer:

17.4

Step-by-step explanation:

The Hundredths place is above four so it has to be the next number up

Answer:17.40

Step-by-step explanation:

17.37 rounded to the nearest tenth is, 17.40, because when rounding, you see if the number is 5 or up ( that means you round it up.)

The acceleration of the sixth grader is 1 m/s².

The initial velocity of the sixth grader is 1.7 m/s. After running for 4.1 seconds, he is moving at 5.8 m/s. We are to find his acceleration. Acceleration is the change in velocity divided by the time taken for the change in velocity to occur. So we have:Acceleration = change in velocity/time taken to change velocity= (5.8 - 1.7) m/s ÷ 4.1 s= 4.1 m/s ÷ 4.1 s= 1 m/s²Therefore, the acceleration of the sixth grader is 1 m/s².

Note that the unit for acceleration is meters per second squared (m/s²).Also note that the answer is less than 150 words. This is because the question only requires a simple calculation and explanation that can be easily understood in a few sentences.

Learn more about Velocity here,

https://brainly.com/question/80295

#SPJ11

when the teacher rewarded 6 students, the total number of tickets passed out would be 6 students multiplied by 2 tickets per student, which equals 12 tickets.

To find out how many tickets were passed out when the teacher rewarded 6 students, we need to examine the given table. We notice that the number of tickets passed out is constant for each day, meaning that the same number of tickets is given to each student.

From the table, we can see that when 3 students were rewarded, 6 tickets were passed out. Similarly, when 2 students were rewarded, 4 tickets were passed out. When 5 students were rewarded, 10 tickets were passed out.

Since the number of tickets passed out is constant for each day, we can determine the number of tickets per student by finding the average number of tickets per student across different days.

Calculating the average, we get (6 + 4 + 10) / (3 + 2 + 5) = 20 / 10 = 2 tickets per student.

Learn more about average here:

https://brainly.com/question/30127573

#SPJ11

Based on the terms you've provided, with the given information, I am unable to compute a specific convolution. I'll help you understand how to use the Convolution Theorem and Laplace Transforms to compute a given function.  

The Convolution Theorem states that the Laplace Transform of the convolution of two functions is the product of their individual Laplace Transforms. Mathematically, it can be represented as:
L{f(t) * g(t)} = F(s) * G(s) where f(t) and g(t) are the time-domain functions, L{} denotes the Laplace Transform, and F(s) and G(s) are their respective Laplace Transforms in the frequency-domain.
To compute the convolution of f(t) and g(t), you can first find the Laplace Transforms F(s) and G(s) of both functions. Then, multiply these two frequency-domain functions, F(s) * G(s), to obtain the Laplace Transform of the convolution. Finally, perform the inverse Laplace Transform on the product to find the time-domain representation of the convolution, which will be an expression in terms of t. In summary, when using the Convolution Theorem and Laplace Transforms to compute the convolution of two functions, follow these steps:
1. Determine the Laplace Transforms of the given functions f(t) and g(t).
2. Multiply the obtained frequency-domain functions F(s) and G(s).
3. Perform the inverse Laplace Transform on the product to get the time-domain expression of the convolution in terms of t.
Keep in mind that to apply these steps, you need specific functions f(t) and g(t) provided.  

Learn more about Convolution Theorem here:

https://brainly.com/question/31423480

#SPJ11

The correct choice is: Part of the man’s work goes into the kinetic energy of the crate, while the other part of his work is done against friction.

When the man accelerates the crate across the rough floor, the efficiency of 50% indicates that only half of the work done by the man is effectively transferred to the crate. The remaining half of the work is lost or dissipated, likely due to friction between the crate and the floor.

Therefore, part of the man's work goes into increasing the kinetic energy of the crate, allowing it to gain speed and move. The other part of the man's work is used to overcome the frictional forces acting against the crate's motion.

To know more about kinetic energy,

https://brainly.com/question/29648471

#SPJ11

Answer:

--------------------

Area is the product of two dimensions, so the ratio of areas of similar figures is equal to the square of the scale factor k.

Hence the scale factor is:

Therefore the ratio of corresponding parts is:

The premises is R • ∼E • ∼D • G

This is the desired conclusion.

The premises, we can conclude that:

R • ∼E • ∼D

The following steps of deductive reasoning:

From premise 3 and the contrapositive of premise 1 can deduce that:

∼(E • D) ⊃ ∼R

Using De Morgan's Law can rewrite this as:

(∼E ∨ ∼D) ⊃ ∼R

Since R ⊃ (E • D) by premise 1 can substitute this into the above equation to get:

(∼E ∨ ∼D) ⊃ ∼(R ⊃ (E • D))

Using the rule of implication can simplify this to:

(∼E ∨ ∼D) ⊃ (R • ∼(E • D))

From premise 2 know that R • ∼G.

Using De Morgan's Law can rewrite this as:

∼(R ∧ G)

Combining this with the above equation get:

(∼E ∨ ∼D) ⊃ ∼(R ∧ G ∧ E ∧ D)

Simplifying this using De Morgan's Law and distributivity get:

(∼E ∨ ∼D) ⊃ (∼R ∨ ∼G)

Finally, using premise 3 and modus ponens can deduce that:

∼E ∨ ∼D ∨ G

Since we know that R • ∼G from premise 2 can substitute this into the above equation to get:

∼E ∨ ∼D ∨ ∼(R • ∼G)

Using De Morgan's Law can simplify this to:

∼E ∨ ∼D ∨ (R ∧ G)

Multiplying both sides by R and ∼E get:

R∼E∼D ∨ R∼EG

Using distributivity and commutativity can simplify this to:

R(∼E∼D ∨ ∼EG)

Finally, using De Morgan's Law can rewrite this as:

R(∼E ∨ G) (∼D ∨ G)

This is equivalent to:

R • ∼E • ∼D • G

For similar questions on premises

https://brainly.com/question/28877767

#SPJ11

A sample size of approximately 136 is needed to estimate the true mean score within 5 points with 95% confidence.

To determine the sample size needed to estimate the true mean score within 5 points with 95% confidence, we can use the formula for sample size calculation:

n = (Z * σ / E)²

In this case, the standard deviation (σ) of the statistics test is given as 29.7, and the desired margin of error (E) is 5.

Plugging these values into the formula:

[tex]n = (1.96 * 29.7 / 5)^2[/tex]

Calculating this expression:

n ≈[tex](58.212 / 5)^2[/tex]

n ≈ [tex]11.6424^2[/tex]

n ≈ 135.6336

Therefore, a sample size of approximately 136 is needed to estimate the true mean score within 5 points with 95% confidence.

Learn more about sample size https://brainly.com/question/30520316

#SPJ1

The parametric equations of the line are:

x = 2

y = 1 - t

z = t

And the symmetric equations of the line are:

x - 2 = 0

y - 1 = -1

z = 1

For the line through the point (2, 1, 0) and perpendicular to both i + j and j + k, we can determine the direction vector of the line.

First, let's find the direction vector by taking the cross product of the vectors i + j and j + k:

(i + j) × (j + k) = i × j + i × k + j × j + j × k

= k - i + 0 + i - j + 0

= -j + k

Therefore, the direction vector of the line is -j + k.

Now, we can write the parametric equations of the line using the given point (2, 1, 0) and the direction vector:

x = 2 + 0t

y = 1 - t

z = 0 + t

The parameter t represents a scalar that can vary, and it determines the points on the line.

To write the symmetric equation, we can use the direction vector -j + k as the normal vector. The symmetric equation is given by:

(x - 2)/0 = (y - 1)/(-1) = (z - 0)/1

Simplifying this equation, we get:

x - 2 = 0

y - 1 = -1

z - 0 = 1

Which can be written as:

x - 2 = 0

y - 1 = -1

z = 1

In summary, the parametric equations of the line are:

x = 2

y = 1 - t

z = t

And the symmetric equations of the line are:

x - 2 = 0

y - 1 = -1

z = 1

These equations describe the line that passes through the point (2, 1, 0) and is perpendicular to both i + j and j + k.

To know more about parametric equation refer here :

https://brainly.com/question/31403319#

#SPJ11

Answer:

6.4 inches

Step-by-step explanation:

The diagonal of a square is equal to the diameter of the circle that can be inscribed in the square. So, if we can find the diameter of the circle, we can then find the length of the square's diagonal, which is also the largest possible length of a side of the square.

The diameter of the circle is 9 inches, so the radius is 4.5 inches. The diagonal of the square is the diameter of the circle, which is 9 inches.

Let's use the Pythagorean theorem to find the length of a side of the square:

a^2 + b^2 = c^2

where a and b are the sides of the square and c is the diagonal.

We know c = 9, so:

a^2 + b^2 = 9^2 = 81

Since we want the largest possible length of a side of the square, we want to maximize the value of a. In a square, a and b are equal, so we can simplify the equation to:

2a^2 = 81

a^2 = 40.5

a ≈ 6.4 (rounded to the nearest tenth of an inch)

Therefore, the largest possible length of a side of the square is approximately 6.4 inches.

Answer: Here you go champ.

Step-by-step explanation:

a.) FROM LEFT TO RIGHT

5, -3, -4, 0

b.) Curve A

ii.) about -1.75

iii.) 3.236, -1.236

Answer:

a)
Missing values

x = -2        y = 5

x = 0         y = - 3

x = 1          y = - 1

x = 3         y = 0

b)

i)  A

ii) - 1.75

iii)  x = 1 + √5 and x = 1 - √5

In decimal that would be
x = 3.23606 and x = −1.23606

I am not sure which form they want it in

Step-by-step explanation:

Given function is
y = x² - 2x - 3

a) To find the missing y values, plug in the corresponding value of x and solve for y

x = -2  ==> y = (-2)² -2(-2) - 3 y = = 4 + 4 - 3 or y = 5
x = 0, y = 0² -2(0) - 3 = - 3
x = 1, y = 1² -2(1) - 3 = 1 - 2 -3 = - 4
x = 3, y = 3² - 2(3) - 3 = 0

b)

i) Graph A(blue) matches the function expression; when x = 1, y = -4 in this curve

ii) Estimate the value of y when x = 2.5

Plug in x = 2.5 into the function

y = (2,5)² -2(2.5) - 3 = 6.25 - 5 - 3 = - 1.75

c) Find the value of x at y =1

When y = 1, we get
x² - 2x - 3 = 1

Moving 1 to the left side gives

x² - 2x - 4 = 0

This is a quadratic equation which can be solved using the quadratic equation. There are calculators for this to ease your pain

But if doing manually

A quadratic equation of the form
ax² + bx + c = 0 will have the solutions

[tex]x_{1,\:2}=\dfrac{-b\pm \sqrt{b^2-4ac}}{2a}[/tex]

In the given expression,
a = 1, b = -2 and c = -4

Let's calculate the individual terms in the quadratic formula and combine everything to solve

b² - 4c = (-2)² -4(1)(-4)
= 4 + 16

= 20

[tex]\sqrt{b^2- 4ac} = \sqrt{20} = \sqrt{4 \cdot 5} = 2\sqrt{5}[/tex]

Therefore the two values of x are

[tex]x_1=\dfrac{-\left(-2\right)+2\sqrt{5}}{2\cdot \:1}\\\\= \dfrac{2 + 2\sqrt{5}}{2}\\= 1 + \sqrt{5}\\\\[/tex]

[tex]x_2=\dfrac{-\left(-2\right) - 2\sqrt{5}}{2\cdot \:1}\\\\= \dfrac{2 - 2\sqrt{5}}{2}\\\\= 1 - \sqrt{5}\\\\[/tex]

So the values of x when y = 1 are
[tex]x=1+\sqrt{5},\:x=1-\sqrt{5}[/tex]