Answer:
the metal is gold I'd say
The mass of one metal atom is [tex]1.770\times 10^{-22}[/tex]grams.
The metal atom is palladium.
Explanation:
Given:
A face-centered unit cell.
The density of the unit cell is [tex]12020 kg/m^3[/tex].
The edge length of the unit cell 389.08 pm
To find:
The mass of one atom of the metal
Solution:
The density of the unit cell = d = [tex]12020 kg/m^3[/tex]
The edge length of the unit cell = a = 389.08 pm
[tex]1 pm = 10^{-12} m\\a=389.08 pm=389.08\times 10^{-12} m=3.8908\times 10^{-10}m[/tex]
Total number of atoms in F.C.C unit cell = z = 4
The atomic mass of the metal atom = M
The density of the unit cell is given by:
[tex]d=\frac{z\times M}{N_A\times a^3}\\12020 kg/m^3=\frac{4\times M}{6.022\times 10^{23}mol^{-1}\times (3.8908\times 10^{-10}m)^3}\\M=0.106586 kg/mol\\1 kg=1000 g\\M=0.106586 kg/mol=0.106586 \times 1000 g/mol\\M=106.586 g/mol[/tex]
The mass of one mole of metal atom = 106.586 g
The mass of 1 atom of metal :
[tex]=\frac{106.586 g}{6.022\times 10^{23}}\\=1.770\times 10^{-22} g[/tex]
The mass of one metal atom is [tex]1.770\times 10^{-22}[/tex] grams.
The atomic mass of the metal atom is 106.586 g/mol which is close to the atomic mass of the palladium. Hence, the metal atom is palladium.
Learn more about the density of unit cell here:
brainly.com/question/7210717?referrer=searchResults
brainly.com/question/1594030?referrer=searchResults
The electrophilic aromatic substitution of isopropylbenzene with FeBr3, Br2 gives 1-bromo-4-isopropylbenzene. Complete the curved-arrow mechanism below, beginning with formation of the active brominating reagent. Remember to include lone pairs and formal charges where appropriate.
Answer:
See explanation below
Explanation:
When the bromine (Br₂) reacts in presence of FeBr₃ with the isopropylbenzene, the isopropylbenzene is a ring activator, therefore, it will promote the substitution in the ortho and para positions. However, as the Isopropyl is voluminic, the ortho position would have steric hindrance and hence, this product is not formed in greater proportions. Instead, the para position becomes more available to reaction, and this product is formed in majority.
The mechanism of reaction can be seen in the following picture, along with the products of the reaction
Hope this helps
calculate the volume of an object with dimensions measuring 3.o cm x 4.0 cm x 1.0 cm
?cm^3
Answer:
12cm^3
Explanation:
to find the volume you multiply each dimension
1x3x4=12
According to VSEPR theory what causes molecular shapes to form?
A: The attraction of electrons and protons
B: The attraction of protons and neutrons
C: The repulsion of electrons and electrons
D: The repulsion of protons and protons
Answer:
C: the repulsion of electrons and electrons.
Explanation:
According to the VSEPR theory, molecular shapes adjust so that the electrons can be as far apart as possible due to electrons repelling each other, which would mean the only possible answer is C.
if you are using 657.0 grams of oxygen gas to react with calcium how many gram of calcium oxide will u product
Answer:
The amount in grams of CaO that will be produced is 2,302.67824 grams
Explanation:
The reaction between calcium and oxygen to produce calcium oxide (quicklime) can be presented as follows;
2Ca (s) + O₂ (g) → 2CaO (s)
From the above chemical equation, we have;
2 moles of calcium, Ca, react with 1 mole of oxygen gas, O₂, to produce 2 moles of CaO
With the assumption that there is an excess amount of Ca, we have;
The molar mass of O₂ = 32 g/mol
The number of moles, 'n', of O₂ in 657.0 grams of oxygen is therefore;
The number of moles of a substance = Mass of substance/(Molar mass of substance)
∴ n = 657.0 g/(32 g/mol) = 20.53125 moles
The number of moles of O₂ in the 657.0 grams of oxygen present in the reaction, n = 20.53125 moles
1 mole of O₂ produces 2 moles of CaO, therefore, 20.53125 moles of oxygen will produce 2 × 20.53125 or 41.0625 moles of CaO
The molar mass of CaO = 56.0774 g/mol
Therefore, the mass of 41.0625 moles of CaO is given as follows;
Mass of substance = (The number of moles of a substance) × (Molar mass of substance)
The mass of CaO produced = 41.0625 moles × 56.0774 g/mol = 2,302.67824 g.
Mg4O2 is an example of what type of bond?
What are the water processes that cause changes in the Earth?
Answer:
Explanation:
Precipitation, evaporation, freezing and melting and condensation are all part of the hydrological cycle - a never-ending global process of water circulation from clouds to land, to the ocean, and back to the clouds.
Answer:Precipitation
Explanation:
How many mg of metallic ions are in 1.0 mL of 0.10 M LINO3
Answer:
0.6941 mg
Explanation:
First we calculate how many LiNO₃ moles there are, using the given concentration and volume:
1.0 mL * 0.10 M = 0.10 mmol LiNO₃As 1 mol of LiNO₃ contains 1 mol of Li, in the problem solution there are 0.10 mmol of Li (the only metallic ion present).
Now we convert Li milimoles into miligrams, using its atomic mass:
0.10 mmol Li * 6.941 mg/mmol = 0.6941 mgWhich tool would help a scientist observe planets?
Barometer
O Microscope
Telescope
Thermometer
Answer: The correct answer would be
Telescope
Explanation:
i took the test
Explain in terms of atomic structure, why cesium has a lower first ionization energy than rubidium. Determine the family/group in which each element is located
Answer:
Explain in terms of atomic structure, why Cesium (Cs) has a LOWER first ionization energy than Rubidium (Rb). Cesium is further down on the periodic table. ... The ion K+1 has one more electron than the atom K. K+1 has lost one electron from its valence shell, and therefore has one less electron shell than K.
Explanation:
Radium contains the most electron shells, which creates a shielding effect that reduces the ionization energy.
Radium:
[tex][Rn]7 S^2[/tex] Layer atomic radiusCalcium:
[tex][Ar]4S^2[/tex] Smaller atomic radiusA higher proportion of electron shells creates a shielding effect, resulting throughout a decreased zeff as well as easier ionization of the outermost election.
Learn more:
https://brainly.com/question/14467776
How many atoms are there in 48 grams of carbon?
Answer:
20
Explanation:
give me a paragraph on what people do when using slim fast?
How does a cap rock allow humans to access oil and natural gas reserve?
Answer:
Cap rocks form the top of reservoirs and create a layer that is impervious to fluid flow By preventing fluids from flowing through it, the fluids are prevented from escaping the reservoir. This applies to oil and gas reservoirs. Oil and gas reservoirs often form in "traps"
Two steps that the factory manger can take to make the factory more carbon neutral are to and to
The following chemical reaction takes place in aqueous solution: SnSO 4 (aq)+2 NaOH(aq) Sn(OH) 2 (s)+Na 2 SO 4 (aq) Write the net tonic equation for this reaction.
The net ionic equation for the reaction between SnSO₄ and NaOH is:
Sn²⁺(aq) + 2OH¯(aq) —> Sn(OH)₂(s)We'll begin by writing the dissociation equation for SnSO₄ and NaOH.
SnSO₄(aq) —> Sn²⁺(aq) + SO₄²¯(aq)
NaOH(aq) —> Na⁺(aq) + OH¯(aq)
In solution, the reaction will proceed as follow:
SnSO₄(aq) + NaOH(aq) —>
Sn²⁺(aq) + SO₄²¯(aq) + Na⁺(aq) + OH¯(aq) —> Sn(OH)₂(s) + Na⁺(aq) + SO₄²¯(aq)
Cancel the spectator ions (i.e Na⁺ and SO₄²¯) and write 2 before OH¯ to obtain the net ionic equation.
Sn²⁺(aq) + 2OH¯(aq) —> Sn(OH)₂(s)
Learn more: https://brainly.com/question/12913128
The number of protons and neutrons are used to determine the:
(C1) T (H4) M (A1) C (H2) A (F4) S
Look at the diagram below.
When this atom becomes an ion, it will
(gain, lose)
electrons. The charge of this ion will be
ASAP QUICK
Explanation:
agreed with above answer
what element can you substitute to mercury in making battery
Answer:
Here is the options: lithium, silver, or alkaline
Explanation:If any of these are on your quiz you will get it. I have been doing my research and studying so this is quite accurate.
1. What is an indicator and how does it work?
Answer:
Chemical indicator, any substance that gives a visible sign, usually by a color change, of the presence or absence of a threshold concentration of a chemical species, such as an acid or an alkali in a solution. An example is the substance called methyl yellow, which imparts a yellow color to an alkaline solution.
What happens to particles when their energy levels decrease
ASAP
Answer:
The kinetic theory of matter can be used to explain how solids, liquids and gases are interchangeable as a result of increase or decrease in heat energy. If it is cooled the motion of the particles decreases as they lose energy.
Explanation:
with 24.1 moles of P4O10 how many moles of H3PO4 could be made
What is the diffrence between organic and inorganic compounds?
Answer:
D. Organic compounds contain carbon and inorganic compounds do not.
Explanation:
What is percent composition by mass?
Percent composition indicates the relative amounts of each element in a compound. For each element, the mass percent formula is: % mass = (mass of element in 1 mole of the compound) / (molar mass of the compound) x 100% or. mass percent = (mass of solute / mass of solution) x 100%.
A ball cart is moving at a rate of 2ms the cart suddenly stops and the ball continues to travel in the same direction at the same speed this is a example of
A ball rolling down a hill is what form of energy?
Answer:
Kinetic energy
Explanation:
An object that is in motion possesses Kinetic energy. A ball rolling down a hill will possess kinetic energy.
Answer:
kinetic I think that's the answer
PLEASE HELP!! i am very stuck
Answer:
Explanation:
Molar mass of Ca(Cn)2 = 92. 11 mol/g
How many grams are in 4.3 x 10 -4 moles of calcium phosphate?
Explanation:
Ca3(PO4)2 1 mole has 310.2 g
Ca3(PO4)2 4.3 × 10^-4 moles has 4.3 × 10^-4 × 310.2
= 1,333.86 × 10^-4
= 1.334 × 10^-1
OR 0.1334 g
Paul went to his friend's 2 km from his house, he used his bike and took him 9 minutes.
Paul and his friend rode another 1.5 km to get some ice cream, it took them 10 minutes.
What was Paul's average speed of the whole trip?
The average speed : 3.07 m/s
Further explanationGiven
d1 = 2 km
t1 = 9 min
d2 = 1.5 km
t2 = 10 min
Required
The average speed
Solution
Average speed = total distance : total time
total distance :
= d1+d2
= 2+1.5
=3.5 km
total time :
= t1+t2
= 9 min + 10 min
= 19 min
Average speed :
= 3.5 km : 19 min
= 0.184 km/min
= 3.07 m/s
The atomic number of an element configuration 2,8, 8,2,13
Answer:
33
Explanation:
The atomic number of an element configuration 2,8, 8,2,13 is 33.
The electron configuration is defined as the arrangement of electrons in atomic or molecular orbitals of an atom. The sum of electrons in different orbitals shown in the electron configuration represents the atomic number of the atom.
So, atomic number of the element configuration 2,8, 8,2,13 is 33.
Can somebody plz help answer these false and truth questions correctly (only if u know for sure) thx :3
WILL MARK BRAINLIEST WHOEVER ANSWERS FIRST :DD
Answer:
1. false
2. true
3.true
4.true
Explanation:
Answer:
1. True
2. True
3. True
4. True
5. True
HOPE THIS HELPS
given the symbol below, how many protons are in the nucleus?