PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5

The first reaction is a first order reaction and the unit of rate constant is s⁻¹. The second one is also a first order reaction with the same unit. Third one is a third order reaction with the unit for k as L² mol⁻² s⁻¹.

Rate of a reaction is the rate of decrease in concentration of the reactants or increase in concentration of the products. The rate is directly proportional to the concentration of reactants and the rate law is written as:

rate = k [reactants]

where, the proportionality constant k is called the rate constant.

The order of a reaction is the sum of powers of the molar concentration of reactants. Thus, each reaction vary in order and the order of reaction also depends on the steps in the reaction.

The general formula of the unit of rate constant is L⁽ⁿ⁻¹⁾ mol⁽¹⁻ⁿ⁾ s⁻¹. Hence,  first reaction is a first order reaction and the unit of rate constant is s⁻¹. The second one is also a first order reaction with the same unit.

Third one is a third order reaction with the unit for k as L² mol⁻² s⁻¹. The fourth one is a second order reaction. Thus, unit of rate constant is L mol⁻¹ s⁻¹.

Find more on rate constant:

https://brainly.com/question/20305922

#SPJ1

Based on the given half-life, the amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay is 33 hours.

The time needed for a quantity to decrease to half of its initial value is known as the half-life. In nuclear physics, the phrase is frequently used to indicate how rapidly unstable atoms decay radioactively or how long stable atoms last.

Any substance that contains unstable atoms that release ionizing radiation during their natural decay is considered radioactive material.

Given the half-life of the radioactive sample of an isotope of bromine to be 16.5 hours. The amount of time it takes for 3/4 of a radioactive sample of an isotope of bromine to decay is calculated as follows:

After one half-life, half of the sample remains, and half decays

After two half-lives, 1/4 of the sample remains, and 3/4 decays

The time for two half-lives = 16.5 hours * 2

The time for two half-lives = 33 hours.

Learn more about half-lives at: https://brainly.com/question/1160651

#SPJ1

The pressure of a container with a volume of 8.95 L holds 0.155 mol of N₂ at 23°C is  42.64 atm.

Ideal gas law is also called as perfect gas law. It is represent by the equation PV = nRT, where, 'P' is the pressure, 'V' is the volume in liters, 'n' is the number of particles in moles, 'T' is the temperature in Kelvin and 'R' is the ideal gas constant.

By ideal gas equation,

PV = nRT

Where,

P = Pressure

V = Volume

n = Number of moles

R = gas constant

T = Temperature

First convert temperature into kelvin

23°C + 273 = 296.15K

By putting given value in ideal gas equation we can solve this problem

P × 8.95 = 0.155 × 8.314 × 296.15 ÷ 8.95

= 381.64 ÷ 8.95

= 42.64 atm

Thus, The pressure of a container with a volume of 8.95 L holds 0.155 mol of N₂ at 23°C is  42.64 atm.

To learn more about the ideal gas law, follow the link;

https://brainly.com/question/4147359

#SPJ1

Answer: I believe its two

Explanation:

Limitations in making progress with Engineering Better Batteries is that electric vehicles are being prevented  to make progress in terms of size  and range , progress which is made is solid state batteries.

A solid-state battery is a battery technology that uses solid electrodes and a solid electrolyte, instead of the liquid or polymer gel electrolytes  which are found in lithium-ion or lithium polymer batteries.

While solid electrolytes were first discovered in the 19th century, several drawbacks have prevented it's widespread application. Developments in the late 20th and early 21st century have caused renewed interest in solid-state battery technologies, especially in the context of electric vehicles, starting in the 2010s.

Solid-state batteries can provide potential solutions for many problems of liquid Li-ion batteries, such as flammability, limited voltage, unstable solid-electrolyte interphase formation, poor cycling performance and strength.

Learn more about solid state batteries,here:

https://brainly.com/question/17683368

#SPJ1

Polyatomic ions are ions made up of more than one atom.

What are Atoms?

Atoms are the smallest particles of matter that make up all objects. They are composed of protons, neutrons, and electrons. Protons and neutrons make up the nucleus of the atom, while electrons orbit around the nucleus. Atoms are the basic units of matter and are the building blocks of all living and nonliving things.

Polyatomic ions are ions that consist of two or more atoms covalently bonded together and carrying a net electric charge. Examples of polyatomic ions include nitrate (NO3−), sulfate (SO42−), phosphate (PO43−), and carbonate (CO32−).

To know more about Atoms,

https://brainly.com/question/16666188

#SPJ1

The number of oxygen atoms present in 2.0L of oxygen gas at same temperature and pressure is 5.1 × 10²² atoms.

The number of atoms of a substance can be calculated by multiplying the number of moles in the substance by Avogadro's number (6.02 × 10²³).

no of atoms = no of moles × 6.02 × 10²³

According to this question, the density of oxygen gas at a certain temperature and pressure is 1.345 g cm-³. If 2.0 L of oxygen gas is given, the mass of the oxygen gas can be calculated as follows:

mass = 1.345 × 2 = 2.69grams

moles = 2.69g ÷ 32g/mol = 0.084moles

No of atoms = 0.084 mol × 6.02 × 10²³

no of atoms = 5.1 × 10²² atoms

Learn more about number of atoms at: https://brainly.com/question/14190064

#SPJ1

Answer:

develops,blossoms are synonyms

1. The reaction: 2C₂H₂(g) + 5O₂(g) → 4CO₂(g) + 2H₂O(g) ΔG = -2,453.1 KJ is spontaneous

2. The reaction: 3H₂(g) + N₂(g) → 2NH₂(g) ΔG = -33.3 KJ is spontaneous

3. The reaction: CO₂(g) + 2H₂O(g) → CH₂(g) + 2O₂(g) ΔG = 800.7 KJ is nonspontaneous

The Gibbs free energy is a core factor in determining whether a reaction is spontaneous or nonspontaneous. Gibbs free energy is given by the following formula:

ΔG = ΔH – TΔS

Where

NOTE

With the above information, we can determine which of the reaction is spontaneous and also the one which is nonspontaneous as shown below:

Learn more about spontaneity of reaction:

https://brainly.com/question/9552459

#SPJ1

Answer:

Acyclic or Open-chain compounds. Cyclic or Closed-chain compounds.

Mass percent of a compound=(mass of element in molecule/total mass of compound)×100  (a) 63.64%

We use the concept of mass percentage composition to explain the concentration of an element in a compound or a component in a combination. This word refers to the overall percent by mass of each element present in a compound.

In chemistry, a compound's percent composition is calculated by dividing its total amount of each elements by the compound's total amount, multiplied by 100. The following formula determines an element's percentage composition:

(gE/gT) = %CE 100

Here, %CE stands for the element's composition in percent.

How to calculate the percentage of each element by mass makes up each compound?

To get the mass percent of an element in a compound, multiply the result by 100 after dividing the mass of the element in 1 mole of the compound by the compound's molar mass.

Calculating total mass of HNO3

= 1 x 1 + 14 x 1 + 16 x 3

= 1 + 14 + 48

= 63

Calculating the mass percentage of Nitrogen in HNO3

= 1/63 x 100

= 1.586 %

To know more about Mass percent composition of nitrogen refer to:

brainly.com/question/10395703

#SPJ1

Based on the information provided, I would recommend the Sunburst Variety of corn as the best choice for growing in the drought conditions of the desert environment.

Sunburst Variety of corn has been specifically developed to be drought-tolerant, meaning that it can survive and produce a good yield even with minimal rainfall.

Therefore, I would recommend the Sunburst variety of corn as the best choice for growing in the desert environment due to its drought-tolerance, deep root system, heat tolerance, high yield, and good quality grain.

Learn more about corn from

https://brainly.com/question/397421

#SPJ1

The temperature of both the reactants and the pace of reaction are correlated in the chemical reaction of baking soda and vinegar the warmth of the reactants causes a raise in the rate of action and vice versa.

When two or more compounds come into touch with one another and create a new substance, the process is known as a chemical reaction (s). Reactants or reagents are the name(s) for the substance(s) or substances that are initially incorporated into the chemical process.

A few synthesis processes can produce several products. One of the more significant chemical processes on Earth is photosynthesis. It enables some microorganisms and plants to transform carbon dioxide gas and water into storable glucose and oxygen. For life to exist on Earth, we need this oxygen.

To know more about Chemical reaction visit:

https://brainly.com/question/29762834

#SPJ1

Answer:

1mole of gas at STP = 22.4dm3

0.0075 mole of CaCO3 = xdm3

cross multiply;

where 22.4dm3 = 22400cm3

x * 1 = 0.0075 * 22400 → 168cm3

the gas CO2 which evolved was gotten from CaCO3 so we use the number of moles of CaCO3 only

When the conductivity is at a minimum, the true thing about the amount of Ba(OH)₂ is that the amount of the two reactants are the same when conductivity is low.

The ability of an aqueous solution to carry an electric current is measured by its conductivity. Ionic strength is measured by conductivity monitors. In automated chromatography systems, conductivity is the main input control parameter used to enable the generation of salt gradients or to control buffer dilution or in-line buffer preparation.

Conductivity monitors can be used to automate and monitor cleaning and equilibration procedures. It's important to remember that temperature affects measurements of conductivity and pH.

When conductivity is low, the amounts of the two reactants are equal. Between the reactants, there are no excesses. The aqueous solution cannot dissolve the precipitate BaSO₄. Since there are no ions, the conductivity is at its lowest.

Learn more about conductivity on:

https://brainly.com/question/1851658

#SPJ1

Complete question

The Ba(OH)₂ dissociates as Ba+2 + 2 OH-. H₂SO₄ dissociates as 2 H+ + SO₄-2. When the conductivity is at a minimum, what must be true about the amount of Ba(OH)₂ compared to H₂SO₄

1.4 x 1023 molecules are present in 2.3 moles of oxygen.

We know that if we multiply the 2.3 moles of oxygen with Avogadro's number which is 6.023 x 1023 then this will give us the number of molecules which is present in the 2.3 moles of oxygen and which is 13.85 x 1023.

Mole is a standard scientific unit for measuring large quantities of very small entities like atoms, molecules, or other specific particles. The mole entitles an extremely large number of units about 6.02214076 × 1023.

So we can conclude that by multiplying Avogadro's number with the 2.3 moles of oxygen then it will give us 1.4 x 1023 molecules.

Learn more about Molecules here: https://brainly.com/question/26044300

#SPJ1

Considering the definition of molality, the molality of the KCl in the solution is 6.56 moles/kg.

Molality, or molal concentration, is the amount of a substance dissolved in a given mass of solvent. It is defined as the moles of a solute per kilogram of solvent.

The Molality of a solution is determined by the expression:

molality= number of moles of solute÷ kilograms of solvent

In this case, you know:

Replacing in the definition of molality:

Molality= 1.41 moles÷ 0.215 kg

Molality= 6.56 moles/kg

The molality of the solution is 6.56 moles/kg.

Learn more about molality:

brainly.com/question/20366625

brainly.com/question/4580605

#SPJ1

The oxidation number of the atoms in the given compounds are :

K₂O: K = + 1; O = -2;

PO₃⁻³: P = +3; O = -2

NH₃: N = -3; H = +1

Cu(NO₃)₂: Cu = +2; N = +5; O = -2

NO₃⁻¹: N = +5;  O = -2

CO₂: C = +4; O = -2

KClO₃: K = +1; Cl = + 5; O = -2

O₂: O = 0

Ca(ClO₄)₂: Ca = +2; Cl = +7; O = -2

The number of electrons an atom or ion has either gained or lost in comparison to the neutral atom is known as the oxidation number or state of the atom or ion.

Group I, 2, and 3 electropositive metal atoms lose a certain number of electrons, and their positive oxidation numbers remain constant.

The oxidation number of the atoms in the given compounds are as follows:

K₂0

K = + 1

O = -2

Sum is (+1 * 2) + (-2) = 0

PO₃⁻³

P = + 3

O = -2

Sum is (+3) + (-2 * 3) = -3

NH₃

N = -3

H = +1

Sum is (-3) + (+1 * 3) = 0

Cu(NO₃)₂

Cu = +2

N = +5

O = -2

Sum is (+2) + (+5 * 2) + (-2 * 6) = 0

NO₃⁻¹

N = +5

O = -2

Sum is (+5) + (-2 * 3) = -1

CO₂

C = +4

O = -2

Sum is (+4) + (-2 * 2) = 0

KClO₃

K = +1

Cl = + 5

O = -2

Sum is (+1) + (5) + (-2 * 3) = 0

O₂

O = 0

Sum is (0 * 2) = 0

Ca(ClO₄)₂

Ca = +2

Cl = +7

O = -2

Sum is (+2) + (+7 * 2) + (-2 * 8) = 0

Learn more about oxidation numbers at: https://brainly.com/question/27239694

#SPJ1

Answer:0.226 gram

Explanation:you can get the answer in two steps calculate 3.40 . 10^22 atoms =

Answer:

4.2 × 10²² ÷ 6.022× 10²³

4.2 × 10²² equals 0.069 moles (approx)

weight of 1 mole of iron = 56g

therefore, 0.069 moles = 56 × 0.069 = 3.9 g

Sorry for lazy work.. :P

Functional group can be interconverted into each their by the means of suitable reagent. Functional group are responsible for the chemical and physical properties of a compound. Therefore in the below given ways compound can bee classified.

A group of atoms forming a component of a molecule that accounts for a particular function or chemical behavior is called a functional group. There are so many functional group in organic chemistry.

first compound--------  secondary (2°)

second compound--------------  secondary (2°)

third compound-------------------- tertiary (3°)

fourth compound ----------------primary (1°)

fifth compound---------------primary (1°)

Therefore in the above given ways compound can bee classified.

To know more about functional group, here:

https://brainly.com/question/14618322

#SPJ1

Answer:

The seventh branch of the municipal police station has implemented various initiatives to improve the relationship between the police and the community, including increased community engagement, increased police visibility, and increased collaboration between the police and local organizations. Despite these efforts, crime data has still increased over the past year, indicating that more needs to be done to reduce crime in the area.

Explanation:

Answer:

Uranium experiences a stronger net force holding its protons and neutrons together than barium.

Explanation:

The temperature at which a solid transforms into a liquid at atmospheric pressure is referred to as the liquid’s melting point.

The fact that water boils at a greater temperature than fluorine makes option C the correct choice. The melting point of water is zero degrees Celsius (32 degrees F). Depending on the atmospheric pressure, different amounts of water will boil at different temperatures. When purified water reaches its boiling point at sea level, it does so at 212 degrees Fahrenheit (100 degrees Celsius).

Compared to fluorine, water has a greater boiling point. Regarding the melting and boiling points of water and fluorine molecules, this statement is accurate.

The temperature at which a substance's solid and liquid phases are in equilibrium is known as its melting point. A temperature at which a substance's vapour pressure reaches its boiling point.

To learn more about melting and boiling points refer to:

https://brainly.com/question/28353842

#SPJ1

Statement C; They are 0°F and 100°F, respectively, correctly describes the melting and boiling points of water. But Instead of F it should be degree Celsius.

To know more about melting point visit

https://brainly.com/question/29138757

#SPJ1

Answer:

BOD produced per 1000kg of milk processed = (1400mg/I x 240m3) / 150000kg = 0.192mg/I

Population equivalent = (0.192mg/I x 75g) / 5 = 0.576g

Explanation:

The mass of [tex]IF_5[/tex] that would be in a 15.88 L sample at 378 K and 0.935 will be 106.51 grams.

The problem can be solved by first using the ideal gas equation to know the number of moles of the gas that is present.

PV = nRT

P = 0.935, V = 15.88 L, T = 378 K, R = 0.082

Making n the subject of the formula:

n = PV/RT

  = (0.935x15.88)/(0.082x378)

   = 0.48 moles of the gas

Recall that, mass = mole x molar mass

The molar mass of [tex]IF_5[/tex] is 221.89 g/mol

Mass of 0.48 moles [tex]IF_5[/tex] = 0.48 x 221.89

                                       = 106.51 grams

In other words, the mass of [tex]IF_5[/tex] that would be in a 15.88 L sample at 378 K and 0.935 is 106.51 grams.

More on ideal gas problems can be found here: https://brainly.com/question/13438949

#SPJ1

Answer:

0.355 moldm^-3

Explanation:

A chemist morning commute is 40.2 kilometers. Given an average speed pf 60.5 mph, 0.66 minutes will it take him to arrive at work.

The overall distance the object covers in a given amount of time is its average speed. A scalar value represents the average speed. It has no direction and is indicated by the magnitude.

If you know how far something has travelled and how long it took to get there, you can calculate its average speed. Speed is calculated as follows: speed = distance * time.

Distance = speed × time

40.2 = 60.5 × time

time = 40.2 / 60.5

= 0.66 minutes

Thus, A chemist morning commute is 40.2 kilometers. Given an average speed pf 60.5 mph, 0.66 minutes will it take him to arrive at work.

To learn more about an average speed, follow the link;

https://brainly.com/question/12322912

#SPJ1

Answer: this looks hard

Explanation:

Answer:

1 Na2S  + 2 HCl  ===>   2 NaCl  + 1 H2S

In these reactions, two compounds exchange ions to form two new compounds.

Explanation:

--- Na2S + ---- HCl ===> ---- NaCl  + ---- H2S

Na  =  2                                  Na = 1 * 2 = 2

S  = 1                                       S = 1

H = 1 * 2 = 2                             H = 2

Cl = 1 * 2 = 2                            Cl = 1 * 2 = Cl

In these reactions, two compounds exchange ions to form two new compounds.

REACTION TYPE:

DOUBLE DISPLACEMENT REACTION/DOUBLE REPLACEMENT

I hope that helps, have a wonderful day!!!!

the answer is that it is a