please help due right now
10 POINTS

Answer:

measuring the isotopic composition of atmospheric co2 shows that the burning of fossil fuels has led to the co2 levels over the last 200 years.

Explanation:

pa brainliest po ty

The theoretical yield of sodium chloride when 8.3 g of sodium react with 4.5 g of chlorine is 3.30 g

We'll begin calculating the masses of Na and Cl that reacted and the mass of NaCl produced from the balanced equation.

Molar mass of Na = 23 g/mol

Mass of Na from the balanced equation = 2 × 23 = 46 g

Molar mass of Cl₂ = 2 × 35.5 = 71 g/mol

Mass of Cl₂ from the balanced equation = 1 × 71 = 71 g

Molar mass of NaCl = 23 + 35.5 = 58.5 g/mol

Mass of NaCl from the balanced equation = 2 × 58.5 = 117 g

SUMMARY

From the balanced equation above,

46 g of Na reacted with 71 g of Cl₂ to produce 117 g of NaCl

From the balanced equation above,

46 g of Na reacted with 71 g of Cl₂

Therefore,

8.3 g of Na will react with = (8.3 × 71)/46 = 12.81 g of Cl₂

From the calculation made above, we can see that a higher amount (i.e 12.81 g) of Cl₂ than what was given (i.e 4.5 g) is needed to react completely with 8.3 g of Na.

Therefore, Cl₂ is the limiting reactant and Na is the excess reactant

From the balanced equation above,

71 g of Cl₂ reacted to produce 117 g of NaCl.

Therefore,

4.5 g of Cl₂ will react to produce = (4.5 × 117)/71 = 3.30 g of NaCl

Thus, the theoretical yield of NaCl produced is 3.30 g

Learn more: https://brainly.com/question/25669079

Answer:

The correct answer is 7.4 g NaCl

Explanation:

Answer:

28/95 = 29.,5 % of Arsine decomposed

Explanation:A sample of gaseous arsine (AsH3) in a 460 mL flask at 332 Torr and 223 K, is heated to 437 K, at which temperature arsine decom- poses to solid arsenic and hydrogen gas. The flask is then cooled to 273 K, at which tem- perature the pressure in the flask is 488 Torr. What percentage of arsine molecules have de- composed?

Answer in units of %.

initial pressure 332 Torr initial volume 0.46 L initial temperature 223K

final pressure 488 Torr final volume 0.46 L final 273 K

Torr is 1/760 atm 332 torr = 0.437 atm 488 Torr =0.642 atm

PV = nRT so n=RT/PV

INITIAL n= 0.082 X 223/(0.437)(0.46) = 91 moles

final n= 0.082 X 273 / (.437)(488) = 105 moles

2AsH3----------> 2As + 3H2

x moles of Arsine decomposed to make 1.5 moles of H2

the final number of moles was

(91 -X)+ 1.5 X = 105 moles

91 + 0.5 X = 105

0.5 X = 14

X =28

CHECK

if 28 moles of Arsine , then the container would have

91 --28 + 1.5(28) = 91 +14 =105 check

so 28/95 = 29.,5 % of Arsine decomposed

Your answer

(quit)

polyalchemVirtuoso

Answer:

Explanation:

ADD YOUR ANSWER

Ask maryhobbs about this question...

New questions in Chemistry

in what area of the united states do the fewest people live​

Read each step. Then put the steps in order from first to last. Write 1 for the first step, 2 for the second step and so on. 1. Fossils fuels are burn…

When unbalanced forces act on an object that is in motion, the object can: A. change speed, direction, or both. B. only change direction. C. only s…

What is the missing letter in H,J,K,L,M,N,O,P.? And what is the opposite of HATE.? And what is the opposite of ME.? Think about it -,-​

what type of reaction is Fe(NO3)3 + 3LiOH = Fe(OH)3 + 3LiNO3

Please answer this quickly. the answers that you find online are not correct. I will mark brainliest if you get it right. NO SPAM!!!!For the reaction …

cuantos gramos de soluto son necesario para preparar 50 ml de Ca(NO3)2 al 4% (w/v)

Calculate the moles of O in 0.182 mole C6H14O. Calculate the number of H atoms in 0.182 mole C6H14O. Calculate the number of C atoms in 0.182 mole C…

When a sulfur atom and an oxygen atom bond to produce substance C, electrons are? a. delocalised b. shared c. transferred​

What is oxidation state?​

LOAD MORE

Previous

Next

Ask

Answer:

the rule is V1/T1= V2/T2

so we convert the T1 from °c to kelvin

78+273.15= 351.15 k

1.60/351.15 = 0.425/T2

4.55 ×10-³ = 0.425/T2

then T2 = 93.40 kelvin

hence, we should decrease the temperature

Answer:

Soap is an excellent cleanser because of its ability to act as an emulsifying agent. An emulsifier is capable of dispersing one liquid into another immiscible liquid. This means that while oil (which attracts dirt) doesn't naturally mix with water, soap can suspend oil/dirt in such a way that it can be removed.

Soap acts as a cleaner because of its ability to act as an emulsifying agent. A soap molecule has a polar head and a nonpolar tail. Soap consists of a carbon chain where one end attracts oil and the other attracts water.  

Most of dirt can be described as oily in nature as oil does not dissolve in water. The molecule of soap consists of sodium salts of long-chain carboxylic acids. In soaps, the chain of carbon atoms dissolves in the oil, and the ionic or polar end of the soap molecule dissolves in water.

The soap molecules produce structures known as micelles. In micelles, one end faces the oil droplet, and the other end which is ionic in nature faces outside. Therefore, soap can form an emulsion in water and supports in dissolving the dirt when we wash our clothes.

Soap can be described as a kind of molecule in which both ends have different properties. The hydrophilic end dissolves water and is attracted to it whereas the hydrophobic end is dissolved in hydrocarbons and is water repulsive in nature.

Learn more about cleaning action of soap, here:

https://brainly.com/question/29509623

#SPJ2

inherited traits are passed from parent to offspring according to the rules of Mendelian genetics. Most traits are not strictly determined by genes, but rather are influenced by both genes and environment

Answer:

Hypertension stage 1 is 130-139 mm of HG

This problem is asking for the major alkyne product that is formed when 1,1‑dichloro‑3‑methylbutane reacts with sodium amide (NaNH₂) ignoring any byproduct.

Thus, we can firstly say that such reaction of an alkyl halide with a strong base such as sodium amide is able to remove the halogen-based substituents and hence form insaturations in the form of double or triple bonds depending on the degree of substitution.

For instance, if one halogen substituent, then an alkene will be formed; but if two, then an alkyne (like this problem).

In such a way, as shown on the attached figure, the product will be 3-methylbutyne due to the loss of two chlorine substituents.

Learn more:

Cardenolides, with the chemical formula CH₁₈C₂₀H₁₅CHCO₂ have (D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms.

Milkweed contains a poison known as cardenolides. The chemical formula for cardenolides CH₁₈C₂₀H₁₅CHCO₂.

The subscripts in the formula represent the atomicities, that is the number of atoms of each element in each part of the formula.

We can calculate the total number of atoms of each element by adding its atomicities.

[tex]C = 1 + 20 + 1 + 1 = 23[/tex]

[tex]H = 18 + 15 + 1 = 34[/tex]

[tex]O = 2[/tex]

Cardenolides, with the chemical formula CH₁₈C₂₀H₁₅CHCO₂ have (D) 23 carbon atoms, 34 hydrogen atoms, and 2 oxygen atoms

Learn more: https://brainly.com/question/13348838

(a) The work done by the nitrogen against external pressure is 126.66 J.

(b) The change in the internal energy of the system is -2,466.66 J.

The given parameters:

The molar mass of the given compound is calculated as follows;

NaN₃ = 23+ (14 x 3) = 65 g/mol

65 g -------------- 42

2.25 g ------------- ?

[tex]= \frac{2.25 \times 42}{65} \\\\= 1.45 \ g[/tex]

The volume of the nitrogen gas is calculated as follows;

[tex]\rho = \frac{m}{V} \\\\V = \frac{m}{\rho} \\\\V = \frac{1.45}{1.165} \\\\V = 1.25 \ L[/tex]

[tex]V = 0.00125 \ m^3[/tex]

The work done by the nitrogen against external pressure is calculated as follows;

[tex]W = PV\\\\W = 101325 \times 0.00125\\\\W = 126.66 \ J[/tex]

The change in the internal energy of the system is calculated by applying first law of thermodynamics as follows;

[tex]\Delta E = Q - W\\\\\Delta E = (-2,340) - (126.66)\\\\\Delta E = -2,466.66 \ J[/tex]

Learn more about first law of thermodynamics here: https://brainly.com/question/2965070

The amount, in grams, of water, that the student originally started with would be 252 g

From the balanced equation of the reaction, the ratio of H2O to H2 is 1:1. Thus for every 1 mole of water that is separated, 1 mole of H2 is produced.

Recall that: mole = mass/molar mass

Mole of 28.0 g H2 produced = 28/2

                                              = 14 moles

Equivalent mole of H2O would, therefore, be 14 moles.

Mass of 14 moles H2O = mole x molar mass

                                      = 14 x 18

                                      = 252 g

More on stoichiometric calculation can be found here:  https://brainly.com/question/8062886?referrer=searchResults

H2O is composed of two hydrogen atoms and one oxygen atom. The central oxygen atom is sp3 hybridized.

H2O is composed of two hydrogen atoms and one oxygen atom. The oxygen atom is bonded to the two hydrogen atoms at a dihedral angle of 104°. There are two lone pairs on the oxygen atom. The molecule has a bent geometry.

The structure of H2O is shown in the image attached to this answer. The central oxygen atom is sp3 hybridized and the shape of the molecule is based on a tetrahedron owing to its electron pair geometry.

Learn more: https://brainly.com/question/967776

Answer:

p=F/A.Explanation:

Answer:

Conversion of energy

Explanation:

Shaking the sand is a form of kinetic energy. The friction of the sand particles rubbing against each other converts the kinetic energy to heat energy. Some of the kinetic energy also converts into the energy of sound waves, which you can hear while you shake the sand.

Answer:

Group 11

Explanation:

Group 11, by modern IUPAC numbering, is a group of chemical elements in the periodic table, consisting of copper (Cu), silver (Ag), and gold (Au).

Answer:

silver, chromium and copper are metal type of element

Can you please add a picture of the case??

Answer:

Chemical energy

Explanation:

I hope this helped you!

Batteries store the energy in the form of chemical energy that chemical energy is converted into electrical energy. Chemical energy is used to stored in the substances within battery.

The conversion of chemical energy into electrical energy or vice versa is called as electrochemical energy . This includes reactions transferring electrons, redox reactions .

Redox reaction in which reduction and oxidation takes place simultaneously. Reduction, when a substance receives one electron. Oxidation when a substance gives away one electron.

A battery is a device that stores chemical energy and converts it to electrical energy. The chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit.

Thus, chemical energy is used to store in the substance within battery.

To learn more about electrochemical energy refer the link below;

https://brainly.com/question/25551241

#SPJ2

Answer:

A

Explanation:

The substance is a gas because the particles far randomly arranged and far apart from each other. This happens because when a substance is a gas, particles have weak attraction to each but a lot more kinetic energy which means the they move around all the time spreading out to fill the container. If it was a solid, then all the particles would be very close together and have a fixed position and if it was a liquid then the particles would be fairly close and moving around each other but as we can see in the diagram, all the particles are far apart confirming that it is a gas.

Answer:

the answer is A beacause the other person is right :)

Explanation:

please give them brainliest

Answer:

Unlike isopropanol, hydrogen peroxide is not a type of alcohol. You might recognize its chemical formula, H2O2, as being similar to that of water (H2O). The difference is that hydrogen peroxide has two oxygen atoms instead of one. That one extra oxygen atom makes it a strong oxidizer.

C

R. F. M (Relative Formula Mass) of C=12

12g of C=1 mole

1.39g of C=(1*1.39)/12

=0.1158 moles

Answer:

[tex]\implies \sf D = \dfrac{PM}{RT}[/tex]

[tex]\implies \sf 3.35= \dfrac{1 \times M}{ \frac{1}{12} \times 298}[/tex]

[tex]\implies \sf 3.35= \dfrac{12\times M}{ 298}[/tex]

[tex]\implies \sf 3.35 \times 298= 12\times M[/tex]

[tex]\implies \sf 998.3= 12\times M[/tex]

[tex]\implies \sf M = \dfrac{998.3}{12} [/tex]

[tex]\implies \bf M = 83.1917 \: \frac{g}{mol} [/tex]

Answer:

17 g/Mol

Explanation:

To determine the molar mass of any compound, you have to add up the molar masses of every atom that make up the respective compound. In this case NH3 equals one nitrogen atom and three hydrogen atoms.

What does that mean? Ammonia's molar mass will be the sum of the molar mass of one nitrogen atom and 3 times the molar mass of a hydrogen atom.

Peroindic table:

N=14.0067 g/mol.

H=1.00794 g/mol

Answer:

B. Biosphere

Explanation:

Because it has less surface area. This can be applied to something like cooking potatoes. Cooking a larger potato will take longer than a small potato.

Answer:

4

Explanation:

cuz pure substance contain one type of atom,molecule,or cpd.

2 is true but it have wrong grammar,if it contain only one type it must be^^molecule^^

Answer:

A pressure cooker looks like a regular pot but has a modified lid that locks on over a rubber gasket to create a seal. The cooker works by raising the temperature of boiling water, thereby speeding up the time it takes to boil, braise, or steam. To use a pressure cooker, you put the food in the pot with some liquid-usually a minimum of 2 cups to build up sufficient steam pressure. Once the lid is locked in place and the cooker is set on high heat, steam develops in the pot and can’t escape. The trapped steam increases the atmospheric pressure inside the cooker by 15 pounds per square inch (psi), or 15 pounds above normal sea-level pressure. At that pressure, the boiling point of water is increased from 212°F to 250°F. This higher temperature is what cooks food faster. Once the cooker has reached full pressure, usually indicated by a gauge or pop-up rod on the lid, a release valve opens, letting out steam in a regulated flow to maintain a constant temperature inside the pot.

Explanation:

The digestive system is made up of the gastrointestinal tract—also called the GI tract or digestive tract—and the liver, pancreas, and gallbladder. The GI tract is a series of hollow organs joined in a long, twisting tube from the mouth to the anus. The hollow organs that make up the GI tract are the mouth, esophagus, stomach, small intestine, large intestine, and anus. The liver, pancreas, and gallbladder are the solid organs of the digestive system.

The small intestine has three parts. The first part is called the duodenum. The jejunum is in the middle and the ileum is at the end. The large intestine includes the appendix, cecum, colon, and rectum. The appendix is a finger-shaped pouch attached to the cecum. The cecum is the first part of the large intestine. The colon is next. The rectum is the end of the large intestine.

Digestion is important because your body needs nutrients from food and drink to work properly and stay healthy. Proteins, fats, carbohydrates, vitamins NIH external link, minerals NIH external link, and water are nutrients. Your digestive system breaks nutrients into parts small enough for your body to absorb and use for energy, growth, and cell repair.

Each part of your digestive system helps to move food and liquid through your GI tract, break food and liquid into smaller parts, or both. Once foods are broken into small enough parts, your body can absorb and move the nutrients to where they are needed. Your large intestine absorbs water, and the waste products of digestion become stool. Nerves and hormones help control the digestive process.