Please help me the formula for the boiling of a square prism is v=s 2 h what is the volume of a prism where a = 1.5 cm h= 8 cm

The p-value he obtains and the general conclusion that can be made at a 99% significance level is 0.01

A p-value is a measure of the evidence against a null hypothesis. In this case, the null hypothesis is that the coin is fair and equally likely to turn up heads or tails.

The coach carries out a significance test to determine if the number of tails in his trial of 100 flips is significantly different from what would be expected if the coin were fair.

The p-value is calculated by comparing the observed number of tails (35) to the expected number of tails (50, if the coin were fair) using a binomial distribution.

This involves finding the probability of observing 35 or fewer tails in 100 flips, assuming the null hypothesis is true. If this probability is low (i.e. if the p-value is small), then it suggests that the coin is not fair and that the observed difference is unlikely to have occurred by chance.

At a 99% significance level, a common threshold used in statistical tests, the p-value needs to be less than 0.01 to reject the null hypothesis and conclude that the coin is not fair.

If the p-value obtained is less than 0.01, then we can conclude with 99% confidence that the coin is biased towards heads. On the other hand, if the p-value is greater than 0.01, then we fail to reject the null hypothesis and conclude that there is not enough evidence to say that the coin is unfair.

To know more about p-value here.

https://brainly.com/question/15874800

#SPJ4

In statistics, p hat is used as an estimator of the population proportion (p) of a categorical variable. It is the sample proportion of the variable, which is calculated as the number of occurrences of a particular category in the sample divided by the total sample size.

The reason why p hat is used is that it provides an estimate of the unknown population proportion based on a representative sample. By using p hat, we can draw inferences about the population proportion with a certain level of confidence. This is important in hypothesis testing and confidence interval estimation, where we want to make statements about the population based on the information gathered from a sample.

Using p hat as an estimator of p is also beneficial because it has desirable statistical properties, such as being an unbiased estimator, having a sampling distribution that approaches normality, and having a known standard error.

Learn more about variables here: brainly.com/question/29583350

#SPJ4

The Answer Is A

Its hard to explain but the answer is A

Answer:

Evaluate the function for x = 10 , that is substitute 10 into any x in the function.

f(10) = 102+8=5+8=13

Step-by-step explanation:

I hope it helps you

The value of function f(x) at x= 10 is 13.

The correct option is C.

In mathematics, a function is an expression, rule, or law that establishes the relationship between an independent variable and a dependent variable. In mathematics, functions exist everywhere, and they are crucial for constructing physical links in the sciences.

We have,

f(x) = x/2 + 8

Now, we have to find the value of function at x= 10.

So, put the value x= 10 the f(x) we get

f(10)= 10/2+ 8

f(10) = 5 + 8

f(10) = 13

Thus, the required value is 13.

Learn more about Function here:

https://brainly.com/question/11718460

#SPJ5

The length of the fishing pole is approximately 2.40 meters.

the equation is

The equation that relates the length of the fishing pole, the distance from the base of the pole to the wall, and the angle of elevation is:

cos (angle of elevation) = adjacent / hypotenuse

In this case, the hypotenuse side is the length of the fishing pole, x, and the adjacent side is the distance from the base of the pole to the wall, 0.5 meters. The angle of elevation is 78 degrees. Therefore:

cos (78) = 0.5 / x

x = 0.5 / cos (78)

x ≈ 2.40 meters

Therefore, the length of the fishing pole is approximately 2.40 meters.

Learn more about angle of elevation at:

https://brainly.com/question/88158

#SPJ1

The requried area of the shaded region is 4.56 square centimeters.

The area of a circle is given by the pie times square of the radius.

Area of circle = πr²

Here,
A right triangle is inscribed in a circle where the diameter of the circle is the hypotenuse of the right triangle,
So from the figure,
The area of the shaded region is given by the difference between the semi-circle LMN and the area of the right triangle LMN

The diameter of the circle is given by trig ratios,
sin 45 = 4/d

d = 4√2 So the radius will be d = 2√2

Now,
As hypotenuse is the diameter of the circle,
So LM = MN

Now,
Area of shaded region = area of semi-circle - an area of a triangle
Area of shaded region = πr²/2 - 1/2 × base × height

Area of the shaded region = 3.14 × [2√2]²/2 - 1/2 × 4 × 4
Area of shaded region = 4.56 cm²

Thus, the requried area of the shaded region is 4.56 square centimeters.

Learn more about circle here:

brainly.com/question/11833983

#SPJ9

Answer:

Step-by-step explanation:

Objective: Solve distance problems by creating and solving a linear

equation.

An application of linear equations can be found in distance problems. When

solving distance problems we will use the relationship rt = d or rate (speed) times

time equals distance. For example, if a person were to travel 30 mph for 4 hours.

To find the total distance we would multiply rate times time or (30)(4) = 120.

This person travel a distance of 120 miles. The problems we will be solving here

will be a few more steps than described above. So to keep the information in the

problem organized we will use a table. An example of the basic structure of the

table is blow:

Rate Time Distance

Person 1

Person 2

Table 1. Structure of Distance Problem

The third column, distance, will always be filled in by multiplying the rate and

time columns together. If we are given a total distance of both persons or trips we

will put this information below the distance column. We will now use this table to

set up and solve the following example

1

Example 1.

Two joggers start from opposite ends of an 8 mile course running towards each

other. One jogger is running at a rate of 4 mph, and the other is running at a

rate of 6 mph. After how long will the joggers meet?

Rate Time Distance

Jogger 1

Jogger 2

The basic table for the joggers, one and two

Rate Time Distance

Jogger 1 4

Jogger 2 6

We are given the rates for each jogger.

These are added to the table

Rate Time Distance

Jogger 1 4 t

Jogger 2 6 t

We only know they both start and end at the

same time. We use the variable tfor both times

Rate Time Distance

Jogger 1 4 t 4t

Jogger 2 6 t 6t

The distance column is filled in by multiplying

rate by time

8 We have total distance, 8 miles, under distance

4t + 6t = 8 The distance column gives equation by adding

10t = 8 Combine like terms, 4t + 6t

10 10 Divide both sides by 10

t =

4

5

Our solution fort, 4

5

hour(48 minutes)

As the example illustrates, once the table is filled in, the equation to solve is very

easy to find. This same process can be seen in the following example

Example 2.

Bob and Fred start from the same point and walk in opposite directions. Bob

walks 2 miles per hour faster than Fred. After 3 hours they are 30 miles apart.

How fast did each walk?

Rate Time Distance

Bob 3

Fred 3

The basic table with given times filled in

Both traveled 3 hours

2

Rate Time Distance

Bob r + 2 3

Fred r 3

Bob walks 2 mph faster than Fred

We know nothing about Fred,so use r for his rate

Bob is r + 2,showing 2 mph faster

Rate Time Distance

Bob r + 2 3 3r + 6

Fred r 3 3r

Distance column is filled in by multiplying rate by

Time.Be sure to distribute the 3(r +2)for Bob.

30 Total distance is put under distance

3r + 6+ 3r = 30 The distance columns is our equation, by adding

6r +6 = 30 Combine like terms 3r + 3r

− 6 − 6 Subtract 6 from both sides

6r = 24 The variable is multiplied by 6

6 6 Divide both sides by 6

r =4 Our solution for r

Rate

Bob 4+2 =6

Fred 4

To answer the question completely we plug 4 in for

r in the table.Bob traveled 6 miles per hour and

Fred traveled 4 mph

Some problems will require us to do a bit of work before we can just fill in the

cells. One example of this is if we are given a total time, rather than the individual times like we had in the previous example. If we are given total time we

will write this above the time column, use t for the first person’s time, and make

a subtraction problem, Total − t, for the second person’s time. This is shown in

the next example

Example 3.

Two campers left their campsite by canoe and paddled downstream at an average

speed of 12 mph. They turned around and paddled back upstream at an average

rate of 4 mph. The total trip took 1 hour. After how much time did the campers

turn around downstream?

Rate Time Distance

Down 12

Up 4

Basic table for down and upstream

Given rates are filled in

1 Total time is put above time column

Rate Time Distance

Down 12 t

Up 4 1 − t

As we have the total time, in the first time we have

t,the second time becomes the subtraction,

total − t

3

Rate Time Distance

Down 12 t 12t

Up 4 1 − t 4 − 4t

=

Distance column is found by multiplying rate

by time.Be sure to distribute 4(1 − t)for

upstream. As they cover the same distance,

= is put after the down distance

12t = 4 − 4t With equal sign, distance colum is equation

+ 4t + 4t Add4tto both sides so variableis onlyon one side

16t =4 Variable is multiplied by 16

16 16 Divide both sides by 16

t =

1

4

Our solution,turn around after 1

4

hr(15 min )

Another type of a distance problem where we do some work is when one person

catches up with another. Here a slower person has a head start and the faster

person is trying to catch up with him or her and we want to know how long it

will take the fast person to do this. Our startegy for this problem will be to use t

for the faster person’s time, and add amount of time the head start was to get the

slower person’s time. This is shown in the next example.

The distance between the points J=(-4, 0) and E = (4, 7) In the coordinate plane is, 10.63 units

The distance between two points in the coordinate plane can be calculated using the distance formula:

d = √((x₂ - x₁)² + (y₂ - y₁)²)

Where (x₁, y₁) and (x₂, y₂) are the coordinates of the two points.

The given points

J=(-4, 0) and E = (4, 7),

we have:

x₁ = -4, y₁ = 0

x₂ = 4, y₂ = 7

Plugging in these values into the distance formula, we get:

d = √((4-(-4))² + (7-0)²)

  = √(8² + 7²)

  = √(64 + 49)

  = √113

  = 10.63 (rounded to the nearest hundredth)

So, the distance between points J and E is approximately 10.63 units.

To know more about points  check:

https://brainly.com/question/7819843

#SPJ9

Work Shown:

x = length

x-2 = width

area = length*width

area = x(x-2)

x(x-2) = 168

x^2-2x = 168

x^2-2x-168 = 0

Plug a = 1, b = -2, c = -168 into the quadratic formula.

[tex]x = \frac{-b\pm\sqrt{b^2-4ac}}{2a}\\\\x = \frac{-(-2)\pm\sqrt{(-2)^2-4(1)(-168)}}{2(1)}\\\\x = \frac{2\pm\sqrt{676}}{2}\\\\x = \frac{2\pm26}{2}\\\\x = \frac{2+26}{2} \ \text{ or } \ x = \frac{2-26}{2}\\\\x = \frac{28}{2} \ \text{ or } \ x = \frac{-24}{2}\\\\x = 14 \ \text{ or } \ x = -12\\\\[/tex]

Ignore x = -12 since we cannot have a negative length.

The only practical solution is x = 14.

If x = 14, then x-2 = 14-2 = 12

The rectangular mirror is 14 inches by 12 inches

Check: area = length*width = 14*12 = 168

The answers are confirmed.

An expression which shows the money spent per test tube is u = 6/3.

Generally speaking, a unit price can be defined as the price that is being charged by a seller for the sale of a single unit of product.

In order to determine the unit price, we would determine the unit rate for one pack of 3 test tubes by using the following mathematical expression;

Unit price = Cost of test tubes/Number of test tubes

Substituting the given parameters into the unit price formula, we have the following;

Unit price = $6/3

Unit price = $2.

Read more on unit price here: brainly.com/question/25381934

#SPJ1

Answer:

13.6

Step-by-step explanation:

To find the mean number of movies that the students saw, we add up all the reported numbers of movies and then divide by the total number of students (which is 8 in this case).

Adding up the reported numbers of movies:

4 + 17 + 17 + 20 + 13 + 4 + 16 + 18 = 109

Dividing by the number of students:

109/8 = 13.625

Rounding to the nearest tenth:

Mean number of movies seen = 13.6

Therefore, the mean number of movies that the students saw, rounded to the nearest tenth, is 13.6.

Answer: 13.6

Step-by-step explanation:

Your basically finding the average:

(4+17+17+20+13+4+16+18)/8 = 13.6

Answer:

use the formula: mEq = (mg x valence) / atomic or molecular weight

Step-by-step explanation:

The cruise ship traveled 78 miles.

Combining objects and counting them as one big group is done through addition. In arithmetic, addition is the process of adding two or more integers together. Addends are the numbers that are added, and the sum refers to the outcome of the operation.

Given:

A cruise ship traveled at a constant rate of 16 mph for 3 hours.

Then it traveled for 2 hours at a constant rate of 15 mph.

The total traveled distance,

= distance at the rate of 16 mph for 3 hours + distance of 15 mph for 2 hours.

= 16 x 3 + 15 x 2

= 48 + 30

= 78 miles.

Therefore, the total distance is 78 miles.

To learn more about the addition;

brainly.com/question/29464370

#SPJ1

Answer:

The given equation is:

√(x+10) - 9 = -7

Adding 9 to both sides of the equation, we get:

√(x+10) = 2

Squaring both sides of the equation, we get:

x + 10 = 4

Subtracting 10 from both sides, we get:

x = -6

Therefore, the solution of the equation √(x+10) - 9 = -7 is x = -6.

Since 1 lbs is 2.2046 kilogram. Therefore, 193 lbs is 87.5433 kilograms.

Pound:

Pound is the name of a series of units of mass ranging from 300 to 600 grams. It refers to an avoirdupois pound (454 grams), most commonly divided by 16 avoirdupois ounces.

Kilogram:

The kilogram or kilogram (symbol: kg) is the basic unit of mass in the SI system. It is defined equal to the mass of the International Prototype in kilograms. It is the only SI base unit that uses prefixes and is still defined in terms of artifacts rather than basic physical properties. A kilogram is equivalent to £2.205 in the English system used in the United States.

According to the Question:

We can use the following formula to convert Pounds to kilogram :

X(kg) = y(lb) × 0.45359237

Converting  193 lbs to kilograms:

To convert 193 pound to kilogram:

⇒ X(kg) = 193(lbs) × 0.45359237

             = 87.5433 kilogram

Learn more about Kilogram:

https://brainly.com/question/28844288

#SPJ4

Answer: A Parameter is a value that represents a property of a population. This could be the population mean.A statistic is a value that represents a property of a sample. This could be the sample mean.In the given scenario, the population is the entire 14 teams.

Step-by-step explanation: I hope this helps^^

True

A square matrix called a permutation matrix is one in which every row and column has exactly one element equal to 1 and every other element is equal to 0. A matrix's rows or columns can be permuted by using permutation matrices.

The resultant matrix will also include exactly one 1 in each row and column and all other elements will be 0. This is because two permutation matrices are multiplied together. This is thus because a permutation matrix created by multiplying two other matrices represents the composition of the permutations represented by the individual matrices.

Similarly, By switching the rows and columns in a permutation matrix, it is possible to create the inverse of that matrix. For example, to get the inverse of a permutation matrix P, swap its rows and columns so that the 1s now occupy the locations where the row and column indices were original. Because each row and column still contain exactly one element that is equal to 1 and all other elements are equal to 0, this matrix is also a permutation matrix.

To learn more about permutation matrix, visit the link below:

https://brainly.com/question/17045948

#SPJ4

Answer: 9

Step-by-step explanation:

Find the factors (numbers that the given number can be divided by to make a whole number) of each number:

9: 1,3,9

18: 1,2,3,6,9,18

It's quite easy here because the numbers are small but if you get bigger numbers, it might be helpful to draw out a prime factorization tree. And then multiply together all the common prime numbers. (I haven't explained this in great detail but if you want to know leave a comment :))

[tex]A = B^-1 * BC[/tex]

Since B is invertible, it can be used to solve the equation.

1. Calculate the inverse of B, [tex]B^-1[/tex].

2. Multiply[tex]B^-1[/tex] with BC, to obtain A.

Assuming that AB and C are square matrices and B is invertible, the equation AB=BC can be solved for A. To do this, we first need to calculate the inverse of B, [tex]B^-1[/tex]. The inverse of a matrix is defined as the matrix which when multiplied to the original matrix, yields the identity matrix. Once we have the inverse of B, we can use it to solve the equation by multiplying [tex]B^-1[/tex] with BC, which will give us A. This works because when we multiply a matrix by its inverse, the result is always the identity matrix. Hence, by multiplying the inverse of B with BC, we can obtain A.

Learn more about equation here

https://brainly.com/question/29657992

#SPJ4

Answer:

Write both linear equations in slope intercept form.

Two membership options are available at a water park: unlimited use for $70 per month or $10 per month plus $5 per visit. 12 visits are the preferred schedule.

AQUAPARK THE BIGGEST IN THE NETHERLANDS! An incredible sight to behold a floating playground island that is 2,000 square meters in size and made up of various floating playsets. For anyone who like climbing, sliding, and jumping, this is a veritable wonderland. Malta's waters received a 96.6% outstanding rating in the assessment and are renowned for their clear waters and undeveloped coasts. Look no farther if you're searching for one of Europe's cleanest open-water locations. Siam Park is the place to go if you want a rush of adrenaline and fast-moving water rapids. While travelling with children, Aqualand is a great option if you're seeking for more family-friendly rides.

The cost of a $10 monthly charge plus $5 for each visit can be calculated as follows:

Cost = 10 + 5*v

where v denotes the monthly visits.

If both membership levels have the same price, then:

[tex]10 + 5*v = 70[/tex]

[tex]5*v = 70 - 10[/tex]

[tex]v = 60/5v = 12[/tex]

To know more about water park here

https://brainly.com/question/28517101

#SPJ4

The system of equations are

a) Drama = ( 1/8 )s + 22

b) Baseball = ( 5/8 )s - 24

c) Dance = ( 1/8 )s + 27

Equations are mathematical statements with two algebraic expressions flanking the equals (=) sign on either side.

It demonstrates the equality of the relationship between the expressions printed on the left and right sides.

Coefficients, variables, operators, constants, terms, expressions, and the equal to sign are some of the components of an equation. The "=" sign and terms on both sides must always be present when writing an equation.

Given data ,

Let the equation be represented as A

Now , the value of A is

Substituting the values in the equation , we get

Let the number of students be represented as s

a)

For Drama , it is 22 more than one​-eighth of the students

On simplifying the equation , we get

Drama = ( 1/8 )s + 22

b)

For Baseball , it is 24 fewer than five​-eighths of the students

On simplifying the equation , we get

Baseball = ( 5/8 )s - 24

c)

For Dance , it is 27 more than one​-eighth of the students

On simplifying the equation , we get

Dance = ( 1/8 )s + 27

Hence , the equations are solved

To learn more about equations click :

https://brainly.com/question/19297665

#SPJ9

The water spills out from the two spills in 1 hour is [tex]9.72*10^{8}[/tex] cubic feet.

Volume is defined as the amount of space occupied by an object within the boundaries in the three dimensional space.

In Hoover Dam, for every second the water is passes through the 2 spills.

Amount of water spills in 1 second in the two spills = 270,000 cubic feet.

We have to estimate the number of cubic feet of water that pass through both spills in 1 hour.

Water spills in one minute = 60*270000

                                           = 1,620,000cubic feet.

Water spills in hour, i.e., 60 minutes = 60*1620000

                                                             = 9,72,000,000 cubic feet.

It can be rewrite as [tex]9.72*10^{8}[/tex]

Hence, the water spills out from the two spills in 1 hour is[tex]9.72*10^{8}[/tex] cubic feet.

Learn more about volume here:

https://brainly.com/question/27770332

#SPJ1

2.5 is the length of segment AB.

What is  line segment ?

A line segment in geometry has two unique points on the line that define its boundaries. Or, a line segment is a section of the line that links two points, as another alternative.

                                   In contrast to a line, which has no endpoints and can go on forever, a line segment has two distinct endpoints that are fixed or identifiable.

          BD ║ AE

 Δ CBD ≈ ΔCAE by AA similarity corresponding sides are proportional .

       CB/CA = CD/DE  ⇒ CB/10 = EC - ED/16

  CB/10 = 16 - 4/16   ⇒  CB/10 = 12/16

  CB = 12 * 10/16  = 7.5

  AB= AC - CB = 10 - 7.5

  AB = 2.5

Learn more about line segment

brainly.com/question/30072605

#SPJ1

The average rate of change of f(x) over the interval is 15/7

From the question, we have the following parameters that can be used in our computation:

The table of values

On the table, we have

f(-3) = -4

f(4) = 11

The average rate is then calculated as

Average rate = [f(4) - f(-3)]/[4 + 3]

Substitute the known values in the above equation, so, we have the following representation

Average rate = (11 + 4)/(4 + 3)

Evaluate

Average rate = 15/7

Hence, the average rate is 15/7

Read more about average rate at

brainly.com/question/17131025

#SPJ1

Complete question

Find the average rate of change on the interval [-3, 4].

X f(x)

-3 -4

4 11

Answer:

29.5735296 cc = 1 oz

You should multiply the top equation by 3 to be able to add the equations and eliminate the x-values in this system.

In order to determine the solution to a system of two linear equations, we would have to evaluate and eliminate each of the variables one after the other, especially by selecting a pair of linear equations at each step and then applying the elimination method.

Given the following system of linear equations:

2x + 5y = 5                .........equation 1.

-6x + 7y = -37                .........equation 2.

By multiplying equation 1 by 3, we have:

3(2x + 5y = 5) = 6x + 15y = 15    ......equation 3

By adding equation 2 to equation 3, we have:

6x + 15y = 15

-6x + 7y = -37

22y = -22

y = -22/22

y = -1.

Read more on elimination method here: brainly.com/question/28405823

#SPJ1

The approximate volume of the sphere is 904.32 cm³

The formula for the volume of a sphere is:

V = (4/3)πr³

where V is the volume of the sphere, r is the radius of the sphere, and π (pi) is a mathematical constant.

From the figure, r = 6cm and we are to use π = 3.14. Thus:

V = (4/3)πr³

V = (4/3) * 3.14 * 6³

V =  904.32 cm³

Learn more about volume of sphere on:

https://brainly.com/question/10171109

#SPJ1

Answer:

This is a standard problem if GP (Geometric Progression) as the height of the ball is getting reduced by 25% every-time it touches the ground.

Step-by-step explanation: