please help me to find out my mistake

Answer:

4.8 Ω

Explanation:

Ohm's law

V = IR

 or    V/I = R

        12/2.5 = R = 4.8 Ω

The average electric current in the lightning will be 8 × [tex]10^{-17}[/tex] A

The lightning conductors are long metal strips running from the spike end of a conductor on the top of a building to the earth. They are used to prevent buildings from destruction when struck by thunder or lightning.

Given that a lightning strike can transfer as much as electrons from the cloud to the ground. if the strike lasts 2ms, to calculate the average electric current in the lightning, we will first consider the charge released.

one charge = 1.6 × [tex]10^{-19}[/tex] C

Average current I = Q/t

Where

Substitute all the parameters into the formula

I = 1.6 × [tex]10^{-19}[/tex] C ÷ 2 × [tex]10^{-3}[/tex]

I = 8 × [tex]10^{-17}[/tex] A

Therefore, the average electric current in the lightning will be 8 × [tex]10^{-17}[/tex] A

Learn more about Lightning here: https://brainly.com/question/3183045

#SPJ1

The mass at the other end of bar will be 50g .

what is mass

It is the fundamental property of matter , every single property which exist in this world has mass

Mass never can be 0 .

So , the system is in equilibrium

let mass of the body be m

55×5= m×5.5

m= 5 5 × 5 /. 5.5

m= 5 0g



to learn more about mass click here https://brainly.com/question/26150306

#SPJ9

137.5 kg mass can be placed 2m away from the other end of the bar to keep the bar horizontally.

To keep the bar horizontal, the right and left side torques must be equal:

[tex]F_{1} d_{1} =F_{2} d_{2}[/tex]

[tex]F_{2} =F_{1} \frac{d_{1} }{d_{2} }[/tex]

    [tex]=(55.9.8)\frac{5}{2}[/tex]

    =1347.5 N.

Convert this force of gravity into mass:

[tex]F_{2} =m_{2} g,[/tex]

[tex]m_{2} =\frac{F_{2} }{g}[/tex]

     [tex]=\frac{1347.5}{9.8}[/tex]

     =137.5 kg.

The answer is 137.5 kg.

To learn more about Horizontal, refer to:

https://brainly.com/question/25806750

#SPJ9

The angle between the two vectors is 0⁰, thus the two vectors are parallel to each other.

The angle between the vectors describes the direction of the vector and the value of the angle can be determined from the horizontal and vertical components of the vectors as shown below.

The sum of the horizontal components and vertical components of the vectors is calculated as follows;

Sum of the horizontal component of the vectors, x = 1 + 1 = 2

Sum of the vertical component of the vectors, y = -1 + 1 = 0

The angle between the vectors is calculated as follows;

θ = arc tan (y/x)

θ = arc tan (0/2)

θ = arc tan (0)

θ = 0⁰

The angle between the two vectors is 0⁰, thus the two vectors are parallel to each other.

Learn more about vectors here: https://brainly.com/question/25811261

#SPJ1

Answer: C. 90°

Explanation:

The correct option is A. The information we know about the known exoplanets is estimates of orbits and masses.

An exoplanet or extrasolar planet is a planet outside the Solar System.

In other words, exoplanet is any planet beyond our solar system.

exoplanets are known for the following characteristics;

Thus, the information we know about the known exoplanets is estimates of orbits and masses.

Learn more about exoplanets here: https://brainly.com/question/1514493

#SPJ1

After the rod is charged and then touched on the neutral metallic sphere and then separated from it, the rod  is repelled by the sphere. Option A

There are very ways in which a static charge could be built up in an object. The ways include;

Now, after the rod is charged and then touched on the neutral metallic sphere and then separated from it, the rod  is repelled by the sphere.

Missing parts;

A plastic rod is charged up by rubbing a wool cloth, and brought to an initially neutral metallic sphere that is insulated from the ground. It is allowed to touch the sphere for a few seconds, and then is separated from the sphere by a small distance. After the rod is separated, the rod

A. is attracted by the sphere

B. is repelled by the sphere

C. feels no force due to the sphere

Learn more about static charges:https://brainly.com/question/14485896

#SPJ1

400 J power will be delivered by lifting a stone of mass 2 kg at the height of 20m in two minutes.

The quantity of energy transferred or transformed per unit of time is known as power. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as an activity in ancient writings. A scalar quantity is a power.

Work completed and time is linked in the power equation. Since forces may move objects and we know that forces perform work, we might anticipate that by understanding the power, we can gain insight into how a body moves through time. This outcome may be especially beneficial.

Given that, a stone ‘X’ of mass 2 kg is lifted to the height of 20m in two minutes, and g=10 m/s-2

Power Delivered = Work done in lifting the stone

Work Done = Potential energy = mgh

Work done = 2 × 10 × 20

Work done = 400 J

To know more about work done refer to: https://brainly.com/question/10247507

#SPJ1

It turns out that the star in question belongs to the K5V star class. Thus, the surface temperature of this must be between 5200 K and 3700 K. It has a surface temperature of 6200 K to 5200 K and is a G2V class star, commonly known as Bernard's star. In other words, the star in question has a colder surface than HIP 87937. This is further explained below.

Generally, The temperature at a surface is referred to as the surface temperature. In particular, it may refer to the surface air temperature, which is the temperature of the air that is relatively close to the earth's surface.

In conclusion, The star in question is of the K5V type. Therefore, the temperature of the surface of this must be somewhere between 5200 and 3700 kelvin. The star with the designation HIP 87937, often known as Bernard's star, is of the G2V type. Stars of this type have a surface temperature that falls anywhere between 6200 and 5200 degrees Celsius. Therefore, it should come as no surprise that the surface temperature of the given star is lower than that of HIP 87937.

Read more about surface temperature

https://brainly.com/question/5344945

#SPJ1

Answer: It is hotter because K is before M

Explanation:

The actual surface temperature of this star is 4600 KK compared to 3100 KK for the M4 star in Parts A and B.

Plotting what is referred to as an H-R diagram for the stars in the cluster is part of the process in which the astronomy student will follow in this type of scenario.

This is referred to as the Hertzsprung–Russell diagram and is a scatter plot which depicts the relationships between stars' absolute magnitudes versus their effective temperature. It can also be inferred that the higher the luminosity of a star, the higher the temperature and vice versa.

This helps to depict stellar evolution as a result of the features used as parameters such as the life cycle as an older star will be less luminous when properly studied by people hereby making it easier to estimate the age of stars.

This therefore the reason why plotting a Hertzsprung–Russell diagram is very important.

Read more about Hertzsprung–Russell diagram here https://brainly.com/question/22641110

#SPJ1

Answer:

As light from a star races through our atmosphere, it bounces and bumps through the different layers, bending the light before you see it. Since the hot and cold layers of air keep moving, the bending of the light changes too, which causes the star's appearance to wobble or twinkle.

Option A.  A force does work on an object if a component of the force is  is parallel to the displacement of the object.

The force applied to an object to displace it from a given point to another point is known as work done on the object.

W = Fd cosθ

where;

Thus, A force does work on an object if a component of the force is  is parallel to the displacement of the object.

Learn more about work done here:https://brainly.com/question/8119756

#SPJ1

The initial temperature of the water was [tex]41.6688^{0} C[/tex].

Given,

Weight of glass 36.5g

specific heat for glass is 840 J/kg⋅C∘.

Initial temperature of glass was  [tex]23.6^{0} C[/tex].

Weight of water is 145*1=145g (Density*Volume=145ml*1g/ml)

Temperature final was [tex]40.8^{0} C[/tex].

specific heat for water is 4186 J/kgâ‹…Câˆ

(m of glass)(Cp of glass)(Tf_glass-Ti_glass) = (m of water)(Cp of water)(Ti_water - Tf_water)

36.5*840*(40.8-23.6)=145*4186*(Ti_water - 40.8)

Ti_water=[tex]41.6688^{0} C[/tex]

In thermodynamics, a material's specific heat capacity, or massic heat capacity as it is sometimes known, is equal to the heat capacity of a sample of the substance divided by the mass of the sample (symbol cp). Informally, it is the quantity of heat needed to raise a substance's temperature by one degree for every unit of mass that is added to it. joule per kelvin per kilogram, or Jkg1K1, is the SI unit for specific heat capacity. For instance, the amount of energy needed to increase the temperature of 1 kilogram of water by 1 K is 4184 joules, making water's specific heat capacity 4184 J kg 1 K 1.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ4

The role of Gravity in the formation of the solar system is that gravity caused the the solar system to move closer to the Sun.

  This was possible because gravity attracted smaller particles together until they formed large particles and began to rotate around the sun.

Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun.

Gravity can also be said to mean an attraction between objects  objects with mass.

Learn more about Gravity at https://brainly.com/question/557206

#SPJ1

Answer:

Approximately [tex]13\; {\rm N \cdot m^{-1}}[/tex] (assuming that [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex].)

Explanation:

Let [tex]F_{\text{s}}[/tex] denote the force that this spring exerts on the object. Let [tex]x[/tex] denote the displacement of this spring from the equilibrium position.

By Hooke's Law, the spring constant [tex]k[/tex] of this spring would ensure that [tex]F_\text{s} = -k\, x[/tex].

Note that the mass of the object attached to this spring is [tex]m = 540\; {\rm g} = 0.540\; {\rm kg}[/tex]. Thus, the weight of this object would be [tex]m\, g = 0.540\; {\rm kg} \times 9.81\; {\rm N \cdot kg^{-1}} \approx 5.230\; {\rm N}[/tex].

Assuming that this object is not moving, the spring would need to exert an upward force of the same magnitude on the object. Thus, [tex]F_{\text{s}} = 5.230\; {\rm N}[/tex].

The spring in this question was stretched downward from its equilibrium by:

[tex]\begin{aligned} x &= (70\; {\rm cm} - 110\; {\rm cm}) \\ &= (-40)\; {\rm cm} \\ &= (-0.40) \; {\rm m}\end{aligned}[/tex].

(Note that [tex]x[/tex] is negative since this displacement points downwards.)

Rearrange Hooke's Law to find [tex]k[/tex] in terms of [tex]F_{\text{s}}[/tex] and [tex]x[/tex]:

[tex]\begin{aligned} k &= \frac{F_{\text{s}}}{-x} \\ &\approx \frac{5.230\; {\rm N}}{-(-0.40)\; {\rm m}} \\ &\approx 13\; {\rm N \cdot m^{-1}}\end{aligned}[/tex].

Pelvic girdle

In human anatomy, the pelvis is a complex of bones that connects the trunk and the legs, supports and balances the trunk, and houses and supports the intestines, the urinary bladder, and the internal organ. It is sometimes referred to as the bony pelvis or the pelvic girdle.
One is located on the left side of the body and the other is located on the right. They come together to make the pelvic girdle, a portion of the pelvis. The hip bones are attached to the upper portion of the skeleton at the sacrum.
The pelvic girdle's main function is to support the upper body's weight while seated and transfer that weight to the lower limbs while standing. For the muscles in the trunk and lower limbs, it functions as attachment point.

To learn more about pelvic girdles please visit -
https://brainly.com/question/24394348

#SPJ4

Answer:

The fringes are 4.7*10^-7 m apart, such that they are adjacent.

Explanation:

Using the formula for adjacent fringes given a single slit:

Δ[tex]x=\frac{(Wavelength)(Distance between slit and screen)}{Width}[/tex]

Δ[tex]x=\frac{(590/10^{9})(1.90) }{(2.30)}[/tex]

Δ[tex]x=0.000000487 m[/tex]

Hope this helps!

The distance between the first-order and second-order dark fringes on the screen will be 4.874 × 10⁻⁵ cm.

Given:

wavelength, λ = 590 nm = 590 × 10⁻⁹ m

Distance between the slit and screen, D = 1.90 m

Width of slit, d = 2.30 m

Calculation:

We know that the distance between two slits is given as:

Δx = λD / d

where  λ is the wavelength of light

           D is the distance between the slit and screen

           d is the width of the slit

Applying values in the above equation we get:

Δx = (590 × 10⁻⁹ m)(1.90 m) / (2.30 m)

    = 4.874 × 10⁻⁷ m

    = 4.874 × 10⁻⁵ cm

Therefore, the distance between the first- and second-order dark fringes on the screen will be 4.874 × 10⁻⁵ cm.

Learn more about interference here:

https://brainly.com/question/16098226

#SPJ4

(Not sure how many examples you need so I will put three for each)

Physical:

Chemical:

c)5A

Explanation:

As,

[tex]I = \frac{P}{V} = \frac{1000}{220} = 5[/tex]

There is no force acting on the large box.

Thus, we can conclude that the force on the large box is zero.

Learn more about the Newton's second law of motion here:

brainly.com/question/25545050

#SPJ1

The focal length of eyepiece is 2.85.

It is given that astronomical telescope is designed with over magnification of 35.

The object has a focal length of 100 cm.

We need to determine the focal length of the eyepiece.

The formula to be used here is for astronomical telescope is:

[tex]m=\frac{f_{0} }{f_{e} }[/tex]

Using values here, we get

[tex]35=\frac{100 }{f_{e} }[/tex]

[tex]f_{e}=100/35=2.85[/tex]

Hence, the focal length of eyepiece is 2.85

Learn more about astronomical telescope click here https://brainly.com/question/14672626

#SPJ1

The force on 0.53 m of Wire A is 1.3×10^(-5) N.

To find the answer, we need to know about the force on a current carrying wire due to another parallel wire.

Force = (4π×10^(-7)×4.8×8.9×0.53)/(2π×0.36)

          = 1.3×10^(-5) N

Thus, we can conclude that the force on 0.53 m of Wire A is 1.3×10^(-5) N.

Learn more about the magnetic force here:

brainly.com/question/25932320

#SPJ4

The statement describes an advantage of recorded presentations is that the audience members have the opportunity to provide feedback. Thus, the correct option for this question is C.

A recorded presentation may be defined as a popular format of multimedia content with a duration of several seconds or minutes that significantly expresses the advantages of a product, service, or any idea with the support of interesting graphic images, concise text, and appropriate narration.

According to the context of this question, a recorded presentation delivers an advantage to the audience to provide feedback. This is because the process of recorded PowerPoint presentation gives the actual sense and understanding to the audience similar to the real event.

Therefore, the correct option for this question is C.

To learn more about Presentation, refer to the link:

https://brainly.com/question/24653274

#SPJ2

Answer: Positive

Explanation: Kobe has had an positive attitude on situations and life itself. No matter the competition he still kept a positive attitude regardless. He still wished the best for others even if his enemies thought otherwise. So Kobe was a positive person on the outlook of life and competition.

To correct the error in the diagram, we need to change +2Q to +Q in order for the charges to become balanced. Option A

A capacitor is  device that is used for storing electric charge. We know that the capacitor is composed of two conductors separated by an insulator.

In order to correct the error in the diagram, we need to change +2Q to +Q in order for the charges to become balanced. Option A

Learn more about capacitor:https://brainly.com/question/17176550

#SPJ1

Answer:

A

Explanation:

Answer:

yes

Explanation:

The heater is placed near the floor because the air currents move upwards so the hot air fills up the whole room. Whereas, an air conditioner is placed near the ceiling because the cold breeze tends to settle down. If it is placed near the floor then it will fill just the bottom of the room with cool air.

More energy is used in creating a louder sound from the mouth.

We use more energy in order to produce a louder sound because energy is the thing that helps in the formation of loud sound. Loudness is dependent on the energy that creates loud sound in the mouth. More energy we apply, more loud sound will produce. Energy is the main factor which gives us a loud sound in each and every instruments. Without, we can't imagine loud sound.

So we can conclude that more energy is used in creating a louder sound from the mouth.

Learn more about sound here: https://brainly.com/question/1199084

#SPJ1

The hottest celebrity is this one.

The majority of stars fall under a select few spectral categories. The hottest to the coldest stars are listed in the spectral types of the Henry Draper and Bright Star Catalogues (see stellar classification). The letters O, B, A, F, G, K, and M are used to indicate these categories in decreasing order of temperature.

Using spectral types, we can categorise stars based on their colour or the spectral lines that are visible in their light. The spectral types are OBAFGKM, with the hottest stars being O and the coldest being M. To humans, cooler stars appear redder and hotter stars appear bluer.

Learn more about Spectral type of stars here:

https://brainly.com/question/2658702

#SPJ4

     charge must be equal to 5.74 ×10⁻⁵

 In the question it is said that the particle remains stationary which means the the net force on the particle is zero. So, the counterbalancing forces must be equal which means weight is equal to upward electric force.

     →    Fnet =0

     →    mg =  qE

 substituting the values we get :

         0.00345 × 9.81 =  q × 590

   →       q = 5.74 ×10⁻⁵

    Hence the charge must be equal to   5.74 ×10⁻⁵.

   Learn more about charges here:

          https://brainly.com/question/26092261

                    # SPJ4

Quantum computing is a better fit than classical computing because it can access advanced simulations for vast quantities of weather.

What is Quantum computing?

Quantum computing can process large number of data sets of weather for all the properties of quantum states. Unlike classical computers which contains only standard bits 0 and 1 , quantum computing use Qubit or Quantum bit in which there are more than two standard sets of bits. These Qubits can measure the light at any degrees of polarisation between 1 and 0.This is the spin attribute that corresponds to superposition. This can create a lot more possibilities beacuse we can run multiple tasks at once with only one bit of data beacuse of the superpositioned qubit. This unlike classical computers where the bit can be only 1 and 0 is more effectively used in breaking encryption tasks.

So, the analysis of vast quantities of weather data can be done in seconds using Quantum computing.

Learn more about Quantum computing here:

https://brainly.com/question/15188300

#SPJ1

yes, it causes an energy crisis. Burning Fossil Fuels

When we burn oil, coal, and gas, we don't just meet our energy needs, we move the current global warming crisis as well.

Fossil fuels produce large amounts of carbon dioxide when burned. Carbon emissions trap heat in the air and lead to climate change.

Most energy crises have been caused by localized shortages, wars and market manipulation. Some have argued that government efforts like tax hikes, nationalization of energy companies, and rule of the energy sector, shift supply and demand of energy away from its economic stability.

To learn more about Burning Fossil Fuels, refer

https://brainly.com/question/21222206

#SPJ9