Please help me with this.

The value will be obtained for r2 is rounding to two decimal places, we get r2 = 0.04, which is equivalent to 4/100 or 4/20.

The correct answer is b. r2 = 4/20.

To calculate r2 from a t statistic, you need to first convert the t statistic to a Cohen's d effect size, which represents the standardized difference between two means.

The formula for Cohen's d is:
[tex]d = t / \sqrt{(n)}[/tex]
Plugging in the values from the problem, we get:
[tex]d = 2.00 / \sqrt{(16)}  = 0.50[/tex]
Next, we can use the formula for r2, which represents the proportion of variance in one variable (in this case, the dependent variable) that is accounted for by the other variable (in this case, the independent variable, which is not specified in the problem):
r2 = d2 / (d2 + 4)
Plugging in the value for d, we get:
r2 = 0.502 / (0.502 + 4) = 0.2025 / 4.5025 = 0.04494
Rounding to two decimal places, we get r2 = 0.04, which is equivalent to 4/100 or 4/20.

Therefore, the answer is b. r2 = 4/20.

For similar question on t statistic.

https://brainly.com/question/15110538

#SPJ11

To calculate the value of r² from t-statistic, we need to first calculate the degrees of freedom (df) for the sample. For a sample size of n = 16, the degrees of freedom can be calculated as follows:

df = n - 1 = 16 - 1 = 15

We can then use the following formula to calculate r² from t:

r² = (t² / (t² + df))

Substituting the values, we get:

r² = (2.00² / (2.00² + 15)) ≈ 0.136

Therefore, the value of r² obtained from the sample is approximately 0.136.

Option c, r² = 2/19, is incorrect. Option b, r² = 4/20, is also incorrect, as it assumes that the t-value is equal to 4, which is not the case.

Learn more about t-statistic here: brainly.com/question/31961016

#SPJ11

the dimensions of the box with minimal surface area are approximately (18.026, 18.026, 27.037) cm.

Let x, y, and z be the dimensions of the box, then we have the volume of the box as:

V = xyz = 5832 cm^3

We want to find the dimensions that minimize the surface area, which is given by:

A = 2xy + 2xz + 2yz

We can solve for one variable in terms of the other two from the equation of volume and substitute in the equation for surface area. Then we can minimize the surface area by taking the derivative of A with respect to one variable and setting it equal to zero.

Solving for z, we have:

z = V/xy = 5832/(xy)

Substituting into the equation for surface area, we get:

A = 2xy + 2x(5832/(xy)) + 2y(5832/(xy))

Simplifying, we have:

A = 2xy + 11664/x + 11664/y

Now, we can take the partial derivative of A with respect to x:

∂A/∂x = 2y - 11664/x^2

Setting this equal to zero and solving for x, we get:

2y = 11664/x^2

x^2 = 5832/y

Substituting this into the equation for z, we get:

z = V/xy = 5832/(xy) = 5832/(x*sqrt(5832/y)) = sqrt(5832y)

Now, we can substitute these expressions for x, y, and z into the equation for surface area:

A = 2xy + 2xz + 2yz

A = 2(sqrt(5832y))^2 + 2x(sqrt(5832y)) + 2y(sqrt(5832y))

A = 4(5832)^(3/2)/y + 2x(sqrt(5832y))

To minimize A, we can take the derivative of A with respect to y:

∂A/∂y = -4(5832)^(3/2)/y^2 + 2x(sqrt(5832)/2)(y^(-1/2))

Setting this equal to zero and solving for y, we get:

y = (5832/3)^(1/3) ≈ 18.026

Substituting this back into the equation for z, we get:

z = sqrt(5832y) ≈ 27.037

Finally, we can solve for x using the equation we derived earlier:

x^2 = 5832/y = 5832/(5832/3)^(1/3) ≈ 18.026

To learn more about dimensions visit:

brainly.com/question/28688567

#SPJ11

In two factor ANOVA, an F ratio is calculated for each different sum of squares.

Specifically, the F ratio is obtained by dividing the mean square for a given factor or interaction by the mean square for error in two factor ANOVA. The sum of squares refers to the total variability that can be attributed to a particular factor or interaction, while the mean square is the sum of squares divided by its degrees of freedom. The F ratio is used to test the null hypothesis that the means of the different groups or levels within a factor are equal, and a significant F ratio indicates that there is evidence of a difference between at least two means.

ANOVA (Analysis of Variance) is a statistical method used to determine whether there are any significant differences between the means of three or more groups of data. ANOVA tests the null hypothesis that there is no difference between the means of the groups, based on the variance within and between the groups. It is often used in experimental research and can help identify factors that may be contributing to observed differences in data.

Learn more about ANOVA here:

https://brainly.com/question/31809956

#SPJ11

True. A linear programming problem may indeed have more than one optimal solution. Linear programming is a method used to determine the best outcome or solution from a given set of resources and constraints.

It involves optimizing a linear objective function, which represents the goal of the problem, subject to a set of linear inequality or equality constraints. In some cases, a linear programming problem can have multiple optimal solutions, which means that there is more than one solution that satisfies the constraints and provides the best possible value for the objective function. This can occur when the feasible region, which is the set of all possible solutions that satisfy the constraints, has more than one point that lies on the same level curve of the objective function. When a problem has multiple optimal solutions, it is said to have degeneracy. Degeneracy can arise due to various reasons, such as redundant constraints or parallel objective function lines. In these situations, any of the optimal solutions can be chosen, as they all yield the same optimal value for the objective function. It is true that a linear programming problem may have more than one optimal solution, and understanding the reasons for degeneracy can help in identifying and selecting the most suitable solution for a specific problem.

Learn more about linear programming here:

https://brainly.com/question/30763902

#SPJ11

The inverse of the matrix with orthonormal columns is simply its transpose.

If a square matrix has orthonormal columns, it means that the dot product of any two columns is zero, except when the two columns are the same, in which case the dot product is 1. This implies that the columns are linearly independent, because if any linear combination of the columns were zero, then the dot product of that combination with any other column would also be zero, which would imply that the coefficients of the linear combination are zero.

Since the matrix has linearly independent columns, it follows that the matrix is invertible. The inverse of the matrix is simply the transpose of the matrix, since the columns are orthonormal. To see why, consider the product of the matrix with its transpose:

[tex](A^T)A = [a_1^T; a_2^T; ...; a_n^T][a_1, a_2, ..., a_n]\\ = [a_1^T a_1, a_1^T a_2, ..., a_1^T a_n; \\ a_2^T a_1, a_2^T a_2, ..., a_2^T a_n; ... a_n^T a_1, a_n^T a_2, ..., a_n^T a_n][/tex]

Since the columns of the matrix are orthonormal, the dot product of any two distinct columns is zero, and the dot product of a column with itself is 1. Therefore, the diagonal entries of the product matrix are all 1, and the off-diagonal entries are all zero. This implies that the product matrix is the identity matrix, and so:

(A^T)A = I

Taking the inverse of both sides, we get:

[tex]A^T(A^-1) = I^-1(A^-1) = A^T[/tex]

Therefore, the inverse of the matrix with orthonormal columns is simply its transpose.

learn more about inverse of the matrix

https://brainly.com/question/4017205

#SPJ11

There would be 3.00 mg of iron-59 remaining. 132 days is equivalent to 3 half-lives because 132/44 = 3. So, we can use the formula to find the amount of iron-59 remaining after 3 half-lives, which is 3.00 mg.

We can use the formula for half-life to determine how much iron-59 remains after 132 days:
Amount remaining = initial amount * (1/2)^(t/h)
Where:
- t is the time that has passed
- h is the half-life of the substance
So, after 132 days, there would be 3.00 mg of iron-59 remaining.

Iron-59 is a radioactive isotope, which means that its nucleus is unstable and will eventually decay into a more stable form. When an isotope decays, it releases energy in the form of radiation (such as alpha, beta, or gamma particles) and transforms into a new element.  The half-life of an isotope is the amount of time it takes for half of the initial amount to decay. For example, if you start with 24 mg of iron-59, after one half-life (44 days), you would have 12 mg remaining. After two half-lives (88 days), you would have 6 mg remaining. And after three half-lives (132 days), you would have 3 mg remaining.

To know more about amount visit :-

https://brainly.com/question/17853331

#SPJ11

The vector r is orthogonal to every column of X.

Let y be the response vector, X be the design matrix, and [tex]$\hat{y}$[/tex]  be the vector of fitted values,

where [tex]\hat{y} = X\hat{\beta}$ and $\hat{\beta}$[/tex] is the vector of estimated coefficients.

The vector of residuals is defined as [tex]r = y - \hat{y}$.[/tex]

To show that r is orthogonal to every column of X, we need to show that [tex]$r^T X_j = 0$[/tex] for all j,

where [tex]$X_j$[/tex]  is the j-th column of X.

[tex]$r^T X_j = (y - \hat{y})^T X_j$[/tex]

[tex]$= y^T X_j - \hat{y}^T X_j$[/tex]

[tex]$= y^T X_j - (\hat{\beta}^T X^T)_j X_j$[/tex][tex](using the fact that $\hat{y} = X\hat{\beta}$)[/tex]

[tex]= y^T X_j - X_j^T (\hat{\beta}^T X^T)$ (using the fact that $(AB)^T = B^T A^T$)[/tex]

[tex]$= y^T X_j - X_j^T X \hat{\beta}$[/tex]

[tex]= y^T X_j - X_j^T X (X^T X)^{-1} X^T y$ (using the fact that $\hat{\beta} = (X^T X)^{-1} X^T y$)[/tex]

[tex]$= y^T X_j - (X X_j)^T (X^T X)^{-1} X^T y$[/tex]

[tex]$= y^T X_j - X_j^T (X^T X)^{-1} (X^T y)$[/tex]

[tex]= y^T X_j - X_j^T \hat{y}$ (using the fact that $\hat{y} = X\hat{\beta}$)[/tex]

[tex]= y^T X_j - y^T X_j = 0$.[/tex]

For similar question on orthogonal.

https://brainly.com/question/28453791

#SPJ11

To show that the vector of residuals, r, is orthogonal to every column of x, we need to show that the dot product between r and every column of x is equal to zero.

The residuals, r, can be calculated as r = y - Xb, where y is the vector of observed values, X is the design matrix, b is the vector of estimated coefficients, and the hat over X denotes the estimated values.  Let's assume that xj is the jth column of the design matrix X, where j can be any integer between 1 and p. The dot product between r and xj is given by:

r'xj = (y - Xb)'xj

    = y'xj - b'X'xj

    = y'xj - b'ej  (where ej is the jth column of the identity matrix)

    = y'xj - b[j]

where b[j] is the jth element of the vector b. Since the least squares estimator b minimizes the sum of the squared residuals, we have X'r = 0, which means that the dot product between r and every column of X is equal to zero. Therefore, the vector of residuals, r, is orthogonal to every column of x.

Learn more about residual vector here brainly.com/question/31399051

#SPJ11

To evaluate the definite integral [tex]\int\limit {0^{8} fx} \, dx[/tex], we first need to identify the values of the function f(x) in the given interval [0, 8].

Since 0 < 1, we know that f(0) = 0. Similarly, since 8 < 11, we know that f(8) = 8.

Next, we need to evaluate the integral of f(x) over the interval [0, 8]. Since the function f(x) is defined piecewise, we need to split the interval into two parts: [0, 1) and [1, 8].

Over the interval [0, 1), the function f(x) is equal to 0. Therefore, the integral of f(x) over this interval is equal to 0.

Over the interval [1, 8], the function f(x) is equal to x. Therefore, the integral of f(x) over this interval is equal to:

[tex]\int\limits {1^{8} x} \, dx=\int\limit \frac{x^{2} }{2}} 1^{8} = \frac{8^{2} }{2} -\frac{1^{2} }{2}=28[/tex]

So, the answer to the question is 28.

Learn more about integral here:

https://brainly.com/question/18125359

#SPJ11

the monthly payments for the loan are approximately $2,372.51.

To calculate the monthly payments for the loan, we need to use the following formula:

PMT = (r * PV) / (1 - (1 + r)^(-n))

where PMT is the monthly payment, r is the monthly interest rate, PV is the present value of the loan (in this case, $100,000), and n is the number of monthly payments (in this case, 4 years * 12 months/year = 48 months).

To calculate the monthly interest rate, we need to first calculate the nominal annual interest rate, compounded monthly. We can do this using the following formula:

r_nom = (1 + r_eff)^(1/12) - 1

where r_eff is the effective annual interest rate, which is given as 9.25%. Substituting:

r_nom = (1 + 0.0925)^(1/12) - 1 = 0.007449

So the monthly interest rate is 0.7449%.

Now we can plug in the values to the formula for PMT:

PMT = (0.007449 * 100000) / (1 - (1 + 0.007449)^(-48)) = $2,372.51

To learn more about annual interest rate visit:

brainly.com/question/30573341

#SPJ11

there are 21 different 2-letter passwords that can be formed from the letters I, M, N, O, P, Q, and R if no repetition of letters is allowed.

If no repetition of letters is allowed, we can use the formula for calculating combinations rather than permutations, since the order of the letters does not matter.

The number of combinations of k items from a set of n items can be calculated using the formula n! / (k!(n-k)!). In this case, we want to find the number of 2-letter passwords that can be formed from a set of 7 letters, so n = 7 and k = 2.

Plugging these values into the formula, we get:

7! / (2!(7-2)!) = 7! / (2!5!) = (7x6) / (2x1) = 21

what is combinations?

In mathematics, combinations are a way to count the number of ways to select a subset of objects from a larger set, where the order of the objects in the subset does not matter.

To learn more about combinations visit:

brainly.com/question/19692242

#SPJ11

To show that S is a subgroup of SL2(Z), we need to verify three properties:

Closure: For any two elements [aa] and [bb] in S, their matrix product [aa][bb] should also be in S.

Identity: The identity element [II] should be in S.

Inverses: For any element [aa] in S, its inverse [aa]^-1 should also be in S.

Let's check each property:

Closure: Let [aa] and [bb] be two elements in S. This means a ≡ d ≡ 1 (mod N) and b ≡ c ≡ 0 (mod N). Now, consider their matrix product:

[aa][bb] = [ab+bd ad+bd]

Since a, b, d are congruent to 1 (mod N), and c is congruent to 0 (mod N), the matrix product [ab+bd ad+bd] satisfies the congruence conditions as well. Therefore, [ab+bd ad+bd] is in S, and closure is satisfied.

Identity: The identity element in SL2(Z) is [II]. Let's check if [II] satisfies the congruence conditions in S. We have a = d = 1 (mod N) and b = c = 0 (mod N), which are the required congruence conditions. Thus, [II] is in S, and the identity property is satisfied.

Inverses: For any element [aa] in S, we need to find its inverse [aa]^-1 in S. The inverse of [aa] in SL2(Z) is [a^-1 -b -c d^-1], where a^-1 and d^-1 are the multiplicative inverses of a and d (mod N). Since a ≡ d ≡ 1 (mod N), their inverses exist and are congruent to 1 (mod N). Therefore, [a^-1 -b -c d^-1] satisfies the congruence conditions for S, and the inverse property is satisfied.

Since S satisfies all three properties of a subgroup, we conclude that S is a subgroup of SL2(Z).

Learn more about congruent here: brainly.com/question/32388312

#SPJ11

The value of acos(-7/6) is not a real number, we can conclude that the angle θf,g does not exist in this case.

Using the inner product =∫01f(x)g(x)dx in the vector space c0[0,1], we can find the norm of f(x) and g(x) as:

[tex]||f|| = sqrt( < f,f > ) = sqrt(∫0^1 (10x^2 - 6)^2 dx) = sqrt(680/35) = 4||g|| = sqrt( < g,g > ) = sqrt(∫0^1 (-6x - 9)^2 dx) = sqrt(405/2) = 9/2[/tex]

To find the angle θf,g between f(x) and g(x), we first need to find <f,g>:

[tex]< f,g > = ∫0^1 (10x^2 - 6)(-6x - 9) dx = -105/5 = -21[/tex]

Then, using the formula for the angle between two vectors:

cos(θf,g) = <f,g> / (||f|| ||g||) = -21 / (4 * 9/2) = -21/18 = -7/6

Taking the inverse cosine of both sides gives:

θf,g = acos(-7/6)

Since the value of acos(-7/6) is not a real number, we can conclude that the angle θf,g does not exist in this case.

To know more about real number refer to-

https://brainly.com/question/10547079

#SPJ11

a) The cost of running the water pipe directly from the water source to the farmhouse is $40/m.

b) The cost of running the water pipe to the farmhouse along the rural roads is $50/m. The better option is the one that minimizes the cost. Thus, the better option depends on the distance between the water source and the farmhouse. If the distance between the water source and the farmhouse is shorter than the length of the route along the rural roads, then it would be better to have the water pipe go directly to the farmhouse.

On the other hand, if the distance between the water source and the farmhouse is greater than the length of the route along the rural roads, it would be better to have the water pipe follow the rural roads. The better option can be calculated as follows:Let d be the distance between the water source and the farmhouse. Then, the cost of having the water pipe go directly to the farmhouse is $40/m. Thus, the cost of this option is $40d. The cost of having the water pipe follow the rural roads is $50/m. Suppose the length of the route along the rural roads is r. Then, by the Pythagorean Theorem, we have:r² = d² + (50 - 40)²r² = d² + 1000r = sqrt(d² + 1000)Therefore, the cost of this option is $50r = $50sqrt(d² + 1000).The better option is the one with the lower cost. If the cost of having the water pipe go directly to the farmhouse is less than the cost of having the water pipe follow the rural roads, then the better option is to have the water pipe go directly to the farmhouse. Otherwise, the better option is to have the water pipe follow the rural roads.

Know more about Pythagorean Theorem here:

https://brainly.com/question/15055785

#SPJ11

The antique skateboard has a rectangular shape with short sides measuring 8 inches. The area of the skateboard is 208 square inches.

To find the missing dimensions of the antique skateboard, we can use the formula for the area of a rectangle, which is length multiplied by width. Given that the short sides of the rectangle are each 8 inches long, we can let one side be the length and the other side be the width. Let's assume the length is L inches and the width is W inches.

Since the area of the skateboard is given as 208 square inches, we can write the equation LW = 208. We know that one side is 8 inches, so substituting the values, we have 8W = 208. Solving for W, we find that W = 208/8 = 26 inches. Therefore, the width of the skateboard is 26 inches.

Now, we can substitute this value back into the equation LW = 208 to solve for L. We have L * 26 = 208, which gives L = 208/26 = 8 inches. Hence, the length of the skateboard is also 8 inches.

In conclusion, the antique skateboard has dimensions of 8 inches by 26 inches, resulting in an area of 208 square inches.

Learn more about  dimensions here :

https://brainly.com/question/31106945

#SPJ11

To solve the congruence 4x ≡ 5 (mod 9), we need to find the inverse of 4 modulo 9, which we found in part (a) of exercise 5 to be 7.

Multiplying both sides of the congruence by the inverse of 4, we get:

4x * 7 ≡ 5 * 7 (mod 9)

28x ≡ 35 (mod 9)

Since 28 ≡ 1 (mod 9), we can simplify the left side of the congruence:

x ≡ 35 (mod 9)

Now we need to find the smallest non-negative integer solution for x. We can do this by repeatedly subtracting 9 from 35 until we get a number less than 9:

35 - 9 = 26
26 - 9 = 17
17 - 9 = 8

So x ≡ 8 (mod 9) is the smallest non-negative integer solution to the congruence 4x ≡ 5 (mod 9) using the inverse of 4 modulo 9 found in part (a) of exercise 5.

Learn more about congruence here:

https://brainly.com/question/31992651

#SPJ11

There are 672 snow globes in the large box.

A cubic box that measures 1/4 foot on each side.

So, we need to find out how many snow globes are in the large box.

 Let's first find the volume of a small box in cubic feet. Each side of the small box measures 1/4 feet.

Volume of the small box = (1/4)³ = 1/64 cubic feet

Let's now find the volume of the large box in cubic feet.

The length of the large box is 2 feet, width is 1.5 feet, and height is 3.5 feet.

Volume of the large box = length × width × height= 2 × 1.5 × 3.5

                                                                                    = 10.5 cubic feet

To find the number of snow globes in the large box, we need to divide the volume of the large box by the volume of one small box.

Number of snow globes in the large box = Volume of the large box / Volume of one small box

                                                                     = 10.5 / (1/64)= 10.5 × 64= 672

To know more about volume visit

https://brainly.com/question/28058531

#SPJ11

The expression that shows the total area of the shape is 4s²

The area of a shape is the space occupied by the boundary of a plane figures like circles, rectangles, and triangles.

The shape above consist of 4 equal squares, each sides of the square is 's'. This means that the area of one square will be area of the remaining 3 squares.

Area of a square is expressed as;

A = l²

where l is the side length

area of one square = s × s

= s²

For 4 squares now, the total area will be

s² + s² + s² + s²

= 4s²

Therefore the total area of the shape is 4s²

learn more about area of shape from

https://brainly.com/question/25965491

#SPJ1

The required answer is the given sequence 20, 18, 148 is divergent.

To determine whether each sequence is convergent or divergent, we need to examine the given sequence: 20, 18, 148.

A convergent sequence is one in which the terms approach a specific value as the sequence progresses, whereas a divergent sequence does not approach a specific value.
A divergent series is an infinite series that is not convergent, meaning that the infinite sequence of the partial sums of the series does not have a finite limit.

If a series converges, the individual terms of the series must approach zero. Thus any series in which the individual terms do not approach zero diverges. However, convergence is a stronger condition: not all series whose terms approach zero converge. A counterexample is the harmonic series
Step 1: Look for a pattern in the sequence.
The given sequence has three terms: 20, 18, and 148. We notice that the first two terms decrease (20 to 18), but then the sequence increases significantly (18 to 148).

Step 2: Determine if the sequence approaches a specific value.
Since there is no clear pattern in the sequence and the terms do not seem to be approaching a specific value, we can conclude that the sequence is divergent.

Therefore, The given sequence 20, 18, 148 is divergent.

To know more about the divergent. Click on the link.

https://brainly.com/question/31778047

#SPJ11

To test the convergence or divergence of the series:

∑(n^2 + 1) / n^8

We can use the p-series test, which states that if the series can be written in the form ∑1/n^p, then it converges if p > 1 and diverges if p ≤ 1.

In this case, we can see that p = 8, which is greater than 1. Therefore, the series converges.

Alternatively, we can also use the limit comparison test. We can compare the given series with a known convergent p-series of the form ∑1/n^7:

lim(n → ∞) [(n^2 + 1) / n^8] / (1 / n^7)

= lim(n → ∞) [(n^2 + 1) / n] * (n^7 / 1)

= lim(n → ∞) [n^9 + n^6] / n

= lim(n → ∞) n^8 + n^5

= ∞

Since the limit is a nonzero value, the series converges by the limit comparison test.

Therefore, the series ∑(n^2 + 1) / n^8 is convergent.

To know about converge and diverge , refer here :

https://brainly.com/question/31778047#

#SPJ11

China has experienced rapid economic growth since the late 1970s as a result of reforms that allowed more citizens to participate in free markets. This is the correct answer.

Central to this, these reforms encouraged people to create new businesses and entrepreneurial opportunities while also promoting foreign investment in China's economy, both of which fueled economic growth. After these reforms, China's economy began to grow rapidly, as the number of private firms and state-owned enterprises increased. The focus shifted to more sophisticated production, including high-tech manufacturing. It resulted in China becoming the world's factory, supplying a wide range of products to the global market. In the late 1970s, China began reforming its economy under Deng Xiaoping's leadership. This helped in improving China's economy.

To know more about economic growth visit:

https://brainly.com/question/11679822

#SPJ11

Answer:

D

Step-by-step explanation:

Took the quiz and its in the question. :p

That the sampling distribution of the quantity (n-1)s^2 / sigma^2 is a chi-square distribution.

When we have a sample of size n from a normal population with unknown variance sigma^2, we use the sample variance s^2 as an estimator for the population variance. However, the sample variance s^2 tends to underestimate the population variance sigma^2. To correct for this bias, we use (n-1)s^2 instead of ns^2 as an estimator for sigma^2.

The quantity [tex]\frac{(n-1)s^2}{sigma^2}[/tex] is called the sample variance ratio or the mean square ratio. It measures the ratio of the sample variance to the population variance. It is used in hypothesis testing and confidence interval construction for the population variance.

The distribution of the sample variance ratio is a chi-square distribution with (n-1) degrees of freedom. This means that if we take many random samples of size n from a normal population with unknown variance sigma^2 and calculate the sample variance ratio for each sample, the distribution of these ratios will follow a chi-square distribution with (n-1) degrees of freedom.

Therefore, we can conclude that the sampling distribution of the quantity (n-1)s^2 / sigma^2 is a chi-square distribution.

To learn more about distribution visit:

https://brainly.com/question/31197941

#SPJ11

Thus,  the sampling distribution of (n-1)s^2 / sigma^2 is a chi-square distribution with n-1 degrees of freedom, assuming a normal population distribution.

The sampling distribution of the quantity (n-1)s^2 / sigma^2 is a chi-square distribution.

Know more about the chi-square distribution

https://brainly.com/question/28260879

#SPJ11

The area of the larger trampoline is 40.82 ft² greater than the area of the smaller trampoline.

The area of a circle of radius r is given by the multiplication of π and the radius squared, as follows:

A = πr²

The radius of the smaller trampoline is given as follows:

6 feet (half the diameter).

Hence the area is given as follows:

A = 3.14 x 6²

A = 113.04 ft².

The radius of the larger trampoline is given as follows:

7 ft.

Hence the area is given as follows:

A = 3.14 x 7²

A = 153.86 ft².

Then the difference of the areas is given as follows:

153.86 - 113.04 = 40.82 ft².

More can be learned about the area of a circle at brainly.com/question/15673093

#SPJ4

The fraction representation of the repeating decimal .1872 72 is 18727/99900.

To express the repeating decimal .1872 72 as a fraction, we can follow these steps:

Let x = .187272...

Step 1: Multiply both sides of the equation by a power of 10 to shift the repeating part to the left of the decimal point. Since there are two digits in the repeating part, we can multiply by 100:

100x = 18.727272...

Step 2: Subtract the original equation from the multiplied equation to eliminate the repeating part:

100x - x = 18.727272... - 0.187272...

99x = 18.54

Step 3: Divide both sides by 99 to isolate x:

x = 18.54 / 99

Simplifying the fraction:

x = 927 / 4950

Therefore, the fraction representation of the repeating decimal .1872 72 is 927/4950.

For more such question on fraction

https://brainly.com/question/17220365

#SPJ11

π(2ft)2(10ft) + π(2ft)2(13ft − 10ft) is used to calculate the total volume of grains that can be stored in the silo.(option-c)

The total volume of grains that can be kept in the silo is calculated as (2ft)2(10ft) + (2ft)2(13ft 10ft).(option-c)

The formula $V = gives the volume of a cylinder.

$, where $r$ denotes the base's radius and $h$ denotes its height. The equation $V = gives the volume of a cone.

$, where $r$ denotes the base's radius and $h$ denotes its height.

The silo is made up of a cone with a height of 3 feet and a radius of 2 feet, as well as a 10 foot tall cylinder with the same dimensions. Consequently, the silo's overall volume is V =

V = [tex]\pi (2ft)^2 (10ft) + \frac{1}{3} \pi (2ft)^2 (3ft)[/tex]

V =[tex]\pi (4ft^2) (10ft) + \frac{1}{3} \pi (4ft^2) (3ft)[/tex]

V = [tex]40 \pi ft^3 + 4 \pi ft^3[/tex]

V = [tex]44 \pi ft^3[/tex](option-c)

For such more questions on volume

https://brainly.com/question/463363

#SPJ8

If circle has a diameter of 20 cm, the area of the circle is 100π square centimeters.

The area of a circle can be calculated using the formula:

A = πr²

where A is the area, π (pi) is a mathematical constant that represents the ratio of the circumference of a circle to its diameter (approximately 3.14), and r is the radius of the circle.

In this case, we are given the diameter of the circle, which is 20 cm. To find the radius, we can divide the diameter by 2:

r = d/2 = 20/2 = 10 cm

Now that we know the radius, we can substitute it into the formula for the area:

A = πr² = π(10)² = 100π

We leave π in the answer since the question specifies to do so.

It's important to include units in our answer to indicate the quantity being measured. In this case, the area is measured in square centimeters (cm²), which is a unit of area.

To learn more about area click on,

https://brainly.com/question/19784529

#SPJ1

The cost of one CD case is $0.39.

According to the problem statement, we have the cost of 6 CD cases, which is given as $2.34.
Let’s denote it as follows:C = $2.34, n = 6
We know that the cost of CD cases (C) is directly proportional to the number of CD cases (n).
Therefore, we can use the following formula:k is the constant of proportionality, which can be found by dividing C by n as follows:
k = C/n = $2.34/6 = $0.39
Now that we have found the constant of proportionality (k), we can use it to find the cost of one CD case (C1) by using the following formula:
C1 = k * nC1 = $0.39 * 1C1 = $0.39

Therefore, the cost of one CD case is $0.39.

To know more about cost, click here

https://brainly.com/question/14566816

#SPJ11

When a pure liquid is converted to a solid at its freezing point, the temperature remains constant during the phase change.

In the case of a solution, the temperature change during the conversion to a solid at its freezing point is a bit more complex. When a solution is cooled to its freezing point, the solvent begins to solidify first, and the solute becomes more concentrated in the remaining liquid. This means that the freezing point of the solution decreases as the concentration of the solute increases. As a result, the temperature at which the solution begins to freeze is lower than the freezing point of the pure solvent.

During the freezing process of the solution, the temperature does not remain constant like in the case of a pure liquid, but it decreases gradually as the solvent solidifies. The rate of temperature decrease depends on the concentration of the solute and the freezing point depression of the solvent. In general, the greater the concentration of solute, the lower the freezing point of the solvent and the greater the temperature change during the conversion of the solution to a solid.

To know more about constant,

https://brainly.com/question/12966918

#SPJ11

The conjectures can be disproven with counterexamples.

The first conjecture states that if f(n) = 0(g(n)), then g(n) = O(f(n)). However, this is not true in general. To disprove this, we can consider a counterexample where f(n) = n and g(n) = n^2. Here, f(n) is indeed O(g(n)), but g(n) is not O(f(n)), as g(n) grows faster than f(n).

The second conjecture suggests that if f(n) + g(n) = Theta(min(f(n), g(n))), then it holds true. However, this is not always the case. Counterexamples can be found by considering functions where f(n) and g(n) have different growth rates.

The third conjecture claims that if f(n) = 0(g(n)), then lg(f(n)) = O(lg(g(n))). However, this conjecture is also false. A counterexample can be constructed by taking f(n) = n and g(n) = n^2. While f(n) is indeed O(g(n)), lg(f(n)) is not O(lg(g(n))) as lg(g(n)) grows much faster than lg(f(n)).

The remaining conjectures can be similarly disproven with suitable counterexamples. It is important to note that disproving a conjecture requires finding just one counterexample that contradicts the statement.

Learn more about conjecture

brainly.com/question/11224568

#SPJ11

Answer:

your anwser is 1085

Step-by-step explanation: