PLEASE HELP WILL GIVE BRAINLIEST

15-10 dividid by 5 times 2^2 in the correct order

Answers

Answer 1

Answer:

12 1/2

Step-by-step explanation:

Answer 2

Answer:

your answer is 4x

Step-by-step explanation:

15-10 is 5

5 divided by 5 is 1

1 times 2 greater than 2 is 4

4x is your answer

Have a good day


Related Questions

The circle (x−9)2+(y−6)2=4 can be drawn with parametric equations. Assume the circle is traced clockwise as the parameter increases. If x=9+2cost

Answers

Circle parametric equations are equations that define the coordinates of points on a circle in terms of a parameter, such as the angle of rotation. The equations are often written in the form x = r cos(theta) and y = r sin(theta), where r is the radius of the circle and theta is the parameter.

These equations can be used to graph circles and to solve problems involving circles, such as finding the intersection of two circles or the area of a sector of a circle. Circle parametric equations are commonly used in mathematics, physics, and engineering.

Given the circle equation (x−9)²+(y−6)²=4, we can find the parametric equations to represent the circle being traced clockwise as the parameter increases.

Step 1: Rewrite the circle equation in terms of radius
The circle equation can be written as (x−h)²+(y−k)²=r², where (h, k) is the center of the circle and r is the radius. In this case, h=9, k=6, and r=√4 = 2.

Step 2: Write the parametric equations for x and y
Since the circle is traced clockwise, we use negative sine for the y-coordinate. The parametric equations for the circle are:
x = h + rcos(t) = 9 + 2cos(t)
y = k - rsin(t) = 6 - 2sin(t)

As given, x = 9 + 2cos(t). The parametric equations representing the circle being traced clockwise are:
x = 9 + 2cos(t)
y = 6 - 2sin(t)

To know more about Circle parametric equations visit:

https://brainly.com/question/29557145

#SPJ11

This spinner was spun 56 times. Select the most likely outcomes for those spins

Answers

The most likely outcomes for those 56 spins are 42 yellow and 14 blue.

Based on probability theory, it is most likely that the spinner will land on yellow more often than blue. Specifically, the expected outcomes for 56 spins would be:

Blue: 56 x 1/4 = 14

Yellow: 56 x 3/4 = 42

Therefore, the most likely outcomes for those 56 spins are 42 yellow and 14 blue.

Learn more about probability here:

brainly.com/question/14290572

#SPJ1

4. Functions m and n are given by m(x) = (1.05) and n(x) = x. As x increases
from 0:
a. Which function reaches 30 first?
b. Which function reaches 100 first?

Answers

The function reaches a. n reaches 30 first. b. m reaches 100 first.

We are given that;

Function=m(x) = (1.05) and n(x) = x

Now,

To find the value of x that makes m(x) = 30, we need to solve the equation

m(x) = 30 (1.05)^x = 30 x = log(30)/log(1.05) x ≈ 23.44

n(x) = 30 x = 30

To compare these values, we see that n(x) reaches 30 first, when x = 30, while m(x) reaches 30 later, when x ≈ 23.44.

Similarly, to find the value of x that makes m(x) = 100, we need to solve the equation:

m(x) = 100 (1.05)^x = 100 x = log(100)/log(1.05) x ≈ 46.89

n(x) = 100 x = 100

To compare these values, we see that m(x) reaches 100 first, when x ≈ 46.89, while n(x) reaches 100 later, when x = 100.

Therefore, by the function answer will be a. n reaches 30 first. b. m reaches 100 first.

Learn more about function here:

https://brainly.com/question/2253924

#SPJ1

b- Identify the sampling method that was used. 1- To determine how long people exercise, a researcher interviews 5 people selected from a yoga class, 5 people selected from a weight-lifting class, 5 people selected from an aerobics class, and 5 people from swimming classes 2- To check the accuracy of a machine that is used for filling ice cream containers, every 20th bottle is selected and weighed. 3-In a medical research study, a researcher selects a hospital and interviews all the patients that day. 4- Customers in the Sunrise Coffee Shop are asked how much they spend on coffee per week.

Answers

In research and data collection, various sampling methods are employed to obtain representative samples from a population. These methods help ensure that the collected data accurately reflects the characteristics of the larger population.

In the scenarios, we will identify the sampling method used for each case.

1. To determine how long people exercise, the researcher interviews 5 people from different exercise classes (yoga, weight-lifting, aerobics, and swimming). This sampling method is known as stratified sampling.

The researcher divides the population (people who exercise) into subgroups (exercise classes) and then selects a sample from each subgroup.

This approach ensures representation from each class and captures the diversity within the larger population.

2. To check the accuracy of a machine used for filling ice cream containers, every 20th bottle is selected and weighed. This sampling method is referred to as systematic sampling.

The researcher selects every 20th bottle in a sequential manner. This approach provides an equal chance for each bottle to be selected and helps in obtaining a representative sample from the production process.

3. In a medical research study, the researcher selects a hospital and interviews all the patients present on a specific day. This sampling method is called a census or a complete enumeration.

The researcher includes the entire population (patients in the hospital) in the study, leaving no one out. This approach allows for a comprehensive analysis of all patients in the hospital on that particular day.

4. Customers in the Sunrise Coffee Shop are asked about their weekly coffee expenditure. This sampling method is known as convenience sampling.

The researcher collects data from individuals who are readily available and easily accessible. However, this method may introduce bias, as it does not guarantee a representative sample of all customers of the coffee shop.

In conclusion, the sampling methods used in the given scenarios are stratified sampling, systematic sampling, census or complete enumeration, and convenience sampling, respectively.

Each method has its own strengths and limitations, and the choice of sampling method depends on the research objectives and constraints.

To know more about sampling methods refer here :

https://brainly.com/question/29172915#

#SPJ11

I need help with my work rq

Answers

Answer:

  286.51 cm

Step-by-step explanation:

You want the circumference of a circle with radius 45.6 cm.

Circumference

The circumference of a circle is given by the formula ...

  C = 2πr

For the given radius, the circumference is ...

  C = 2π(45.6 cm) = 286.51 cm

The circumference is about 286.51 cm.

<95141404393>

suppose that 34% of the petri dishes in a lab contain agar that has been colored green. you will independently sample 10 of the dishes. which is true of the (random) number of green dishes that you will have in your sample? group of answer choices the distribution is right skewed the distribution is left skewed the distribution is symmetric the distribution is multi-modal none of the other answers

Answers

The number of green dishes in the sample will be the distribution is right skewed.  Option(1)

The number of green dishes in the sample of 10 petri dishes follows a binomial distribution with parameters n = 10 and p = 0.34.

The probability mass function of a binomial distribution is given by:

[tex]P(X = k) = (n choose k) * p^k * (1-p)^(n-k)[/tex]

where X is the random variable representing the number of green dishes in the sample, k is a specific value of X, (n choose k) is the binomial coefficient, and p is the probability of success (i.e., the proportion of petri dishes that contain agar colored green).

The mean and variance of a binomial distribution are given by:

mean = n * p

variance = n * p * (1-p)

In this case, the mean is:

mean = 10 * 0.34 = 3.4

And the variance is:

variance = 10 * 0.34 * (1-0.34) = 2.244

The distribution of the number of green dishes in the sample is not symmetric because the binomial distribution is skewed whenever p is not equal to 0.5. In this case, p is 0.34, so the distribution is skewed to the right.

Therefore, the correct answer is: The distribution is right skewed.

Learn more about binomial distribution

https://brainly.com/question/31197941

#SPJ4

Full Question: Suppose that 34% of the petri dishes in a lab contain agar that has been colored green. you will independently sample 10 of the dishes. which is true of the (random) number of green dishes that you will have in your sample? group of answer choices

the distribution is right skewed the distribution is left-skewed the distribution is symmetric the distribution is multi-modal none of the other answers

Use Δy≈f′(x)Δx to find a decimal approximation of the radical expression. √131
What is the value found using Δy≈f′(x)Δx?

Answers

The value for the radical expression found using Δy≈f′(x)Δx is approximately 10.545.

We can approximate the square root of 131 using the tangent line approximation at x = 121 (since 121 is a perfect square and close to 131).

Let f(x) = √x and f'(x) = 1/(2√x).

Then, at x = 121, we have:

f(121) = √121 = 11

f'(121) = 1/(2√121) = 1/22

Using the tangent line approximation with Δx = 10 (since 131-121=10), we get:

Δy ≈ f'(121)Δx = (1/22)(10) = 10/22 = 5/11

Therefore, an approximation of √131 is:

√131 ≈ f(121) + Δy ≈ 11 + 5/11 = 116/11 ≈ 10.545

So the value found using Δy≈f′(x)Δx is approximately 10.545.

To know more about radical expression refer here:

https://brainly.com/question/3796764

#SPJ11

What is the perimeter of a regular octagon with side length 2. 4mm.

Answers

The perimeter of a regular octagon with a side length of 2.4mm can be calculated by multiplying the length of one side by the number of sides, which is 8.

A regular octagon is a polygon with eight equal sides and angles. To find the perimeter, we need to calculate the total distance around the octagon.

Since all sides of a regular octagon are equal, we can simply multiply the length of one side by the number of sides to find the perimeter. In this case, the side length is given as 2.4mm, and the octagon has 8 sides.

Perimeter = Side length * Number of sides = 2.4mm * 8 = 19.2mm.

Therefore, the perimeter of the regular octagon with a side length of 2.4mm is 19.2mm.

Learn more about perimeter here:

https://brainly.com/question/7486523

#SPJ11

Given f(x)=x 2+4x and g(x)=1−x 2 find f+g,f−g,fg, and gf​Enclose numerators and denominators in parentheses. For example, (a−b)/(1+n). (f+g)(x)=(f−g)(x)=fg(x)=gf(x)=

Answers

A enclose numerators and denominators in parentheses.  f(x)=x 2+4x and g(x)=1−x² is fg(x) = x² - x⁴ + 4x - 4x³ ,gf(x) = x² - x⁴ + 4x - 4x²

To find the values of (f+g)(x), (f-g)(x), fg(x), and gf(x), the respective operations on the given functions f(x) and g(x).

Given:

f(x) = x² + 4x

g(x) = 1 - x²

(f+g)(x):

To find (f+g)(x), the two functions f(x) and g(x):

(f+g)(x) = f(x) + g(x) = (x² + 4x) + (1 - x²)

= x² + 4x + 1 - x²

= (x² - x²) + 4x + 1

= 4x + 1

Therefore, (f+g)(x) = 4x + 1.

(f-g)(x):

To find (f-g)(x), subtract the function g(x) from f(x):

(f-g)(x) = f(x) - g(x) = (x² + 4x) - (1 - x²)

= x² + 4x - 1 + x²

= (x² + x²) + 4x - 1

= 2x² + 4x - 1

Therefore, (f-g)(x) = 2x² + 4x - 1.

fg(x):

fg(x), multiply the two functions f(x) and g(x):

fg(x) = f(x) × g(x) = (x² + 4x) × (1 - x²)

= x² - x⁴ + 4x - 4x³

Therefore, fg(x) = x² - x⁴ + 4x - 4x³.

gf(x):

gf(x), multiply the two functions g(x) and f(x):

gf(x) = g(x) × f(x) = (1 - x²) × (x² + 4x)

= x² - x⁴ + 4x - 4x³

Therefore, gf(x) = x² - x⁴ + 4x - 4x³.

[tex](f+g)(x) = 4x + 1\\\\(f-g)(x) = 2x^2 + 4x - 1\\\\fg(x) = x^2 - x^4 + 4x - 4x^3\\\\gf(x) = x^2 - x^4 + 4x - 4x^3\\[/tex]

To know more about numerators and denominators here

https://brainly.com/question/15007690

#SPJ4

Determine μx and σx from the given parameters of the population and sample size.
μ=68 σ=20​ n=29

Answers

To determine μx and σx, we can use the formula:

μx = μ
σx = σ / √n

Plugging in the values we get:

μx = 68
σx = 20 / √29 ≈ 3.71

Therefore, the sample mean is 68 and the sample standard deviation is approximately 3.71.


μx represents the mean of the sample and σx represents the standard deviation of the sample. We can calculate these values using the formula provided above, which involves the population mean (μ), population standard deviation (σ), and sample size (n).

In this case, the population mean is 68, the population standard deviation is 20, and the sample size is 29. By plugging in these values into the formula, we can calculate the sample mean and sample standard deviation.


By calculating the sample mean and sample standard deviation, we have a better understanding of the distribution of the sample data. These values can be used to make inferences about the population, such as estimating population parameters or testing hypotheses.
 Let's determine μx (the mean of the sample) and σx (the standard deviation of the sample) using the given population parameters and sample size.


μx = μ = 68
σx = σ / √n = 20 / √29

Explanation:
1. The mean of the sample (μx) is equal to the mean of the population (μ), so μx = 68.
2. To find the standard deviation of the sample (σx), you need to divide the population standard deviation (σ) by the square root of the sample size (n). In this case, σ = 20 and n = 29, so σx = 20 / √29.


For the given population parameters and sample size, the mean of the sample (μx) is 68, and the standard deviation of the sample (σx) is approximately 3.71 (20 / √29 ≈ 3.71).

To learn more about deviation visit:

https://brainly.com/question/23907081

#SPJ11

A gardener wonders if his house plants would grow faster if he used rainwater instead of tap water to water the plants. Which of the following is a null hypothesis for this scenario?

Answers

The Null hypothesis would be rejected in favor of an alternative hypothesis, indicating that the type of water used does have an effect on plant growth.

The gardener is testing whether using rainwater instead of tap water would lead to faster plant growth, the null hypothesis (H₀) is a statement that assumes no significant difference or effect between the two variables being compared. In this case, the null hypothesis would state that there is no difference in plant growth between using rainwater and tap water.

The null hypothesis for this scenario can be formulated as follows:

H₀: There is no significant difference in the growth rate of house plants when using rainwater compared to tap water.

This null hypothesis assumes that the type of water used (rainwater or tap water) has no impact on the growth rate of the house plants. It suggests that any observed differences in growth between the two groups (rainwater and tap water) are due to chance or random variation.

When conducting an experiment or study, the purpose is to gather evidence to either support or reject the null hypothesis. If the evidence suggests a significant difference in plant growth between using rainwater and tap water, the null hypothesis would be rejected in favor of an alternative hypothesis, indicating that the type of water used does have an effect on plant growth.

To know more about  Null hypothesis.

https://brainly.com/question/4436370

#SPJ11

use a table of laplace transforms to find the laplace transform of the given function. h(t) = 3 sinh(2t) 8 cosh(2t) 6 sin(3t), for t > 0

Answers

The Laplace transform of h(t) is [tex]L{h(t)} = (6 + 8s)/(s^2 - 4) + 18/(s^2 + 9)[/tex]

To use the table of Laplace transforms, we need to express the given function in terms of functions whose Laplace transforms are known. Recall that:

The Laplace transform of sinh(at) is [tex]a/(s^2 - a^2)[/tex]

The Laplace transform of cosh(at) is [tex]s/(s^2 - a^2)[/tex]

The Laplace transform of sin(bt) is [tex]b/(s^2 + b^2)[/tex]

Using these formulas, we can write:

[tex]h(t) = 3 sinh(2t) + 8 cosh(2t) + 6 sin(3t)\\= 3(2/s^2 - 2^2) + 8(s/s^2 - 2^2) + 6(3/(s^2 + 3^2))[/tex]

To find the Laplace transform of h(t), we need to take the Laplace transform of each term separately, using the table of Laplace transforms. We get:

[tex]L{h(t)} = 3 L{sinh(2t)} + 8 L{cosh(2t)} + 6 L{sin(3t)}\\= 3(2/(s^2 - 2^2)) + 8(s/(s^2 - 2^2)) + 6(3/(s^2 + 3^2))\\= 6/(s^2 - 4) + 8s/(s^2 - 4) + 18/(s^2 + 9)\\= (6 + 8s)/(s^2 - 4) + 18/(s^2 + 9)[/tex]

Therefore, the Laplace transform of h(t) is:

[tex]L{h(t)} = (6 + 8s)/(s^2 - 4) + 18/(s^2 + 9)[/tex]

for such more question on Laplace transform

https://brainly.com/question/30401252

#SPJ11

To find the Laplace transform of h(t) = 3 sinh(2t) 8 cosh(2t) 6 sin(3t), for t > 0, we can use the table of Laplace transforms. The Laplace transform of the given function h(t) is: L{h(t)} = (6/(s^2 - 4)) + (8s/(s^2 - 4)) + (18/(s^2 + 9))

First, we need to use the following formulas from the table:

- Laplace transform of sinh(at) = a/(s^2 - a^2)
- Laplace transform of cosh(at) = s/(s^2 - a^2)
- Laplace transform of sin(bt) = b/(s^2 + b^2)

Using these formulas, we can find the Laplace transform of each term in h(t):

- Laplace transform of 3 sinh(2t) = 3/(s^2 - 4)
- Laplace transform of 8 cosh(2t) = 8s/(s^2 - 4)
- Laplace transform of 6 sin(3t) = 6/(s^2 + 9)

To find the Laplace transform of h(t), we can add these three terms together:

L{h(t)} = L{3 sinh(2t)} + L{8 cosh(2t)} + L{6 sin(3t)}
= 3/(s^2 - 4) + 8s/(s^2 - 4) + 6/(s^2 + 9)
= (3 + 8s)/(s^2 - 4) + 6/(s^2 + 9)

Therefore, the Laplace transform of h(t) is (3 + 8s)/(s^2 - 4) + 6/(s^2 + 9).


To use a table of Laplace transforms to find the Laplace transform of the given function h(t) = 3 sinh(2t) + 8 cosh(2t) + 6 sin(3t) for t > 0, we'll break down the function into its components and use the standard Laplace transform formulas.

1. Laplace transform of 3 sinh(2t): L{3 sinh(2t)} = 3 * L{sinh(2t)} = 3 * (2/(s^2 - 4))
2. Laplace transform of 8 cosh(2t): L{8 cosh(2t)} = 8 * L{cosh(2t)} = 8 * (s/(s^2 - 4))
3. Laplace transform of 6 sin(3t): L{6 sin(3t)} = 6 * L{sin(3t)} = 6 * (3/(s^2 + 9))

Now, we can add the results of the individual Laplace transforms:

L{h(t)} = 3 * (2/(s^2 - 4)) + 8 * (s/(s^2 - 4)) + 6 * (3/(s^2 + 9))

So, the Laplace transform of the given function h(t) is:

L{h(t)} = (6/(s^2 - 4)) + (8s/(s^2 - 4)) + (18/(s^2 + 9))

Learn more about Laplace at: brainly.com/question/31481915

#SPJ11

Write out a power set in roster notation. Write the power set of each set in roster notation. (a) {a} (b) {1,2}

Answers

The power set in roster notation requires listing all the possible subsets of a set, including the empty set and the set itself. The number of subsets in a power set can be calculated using the formula 2^n, where n is the number of elements in the original set.

The power set of a set is the set of all its subsets, including the empty set and the set itself. To write out the power set in roster notation, we need to list all the possible subsets of a given set.
(a) The set {a} has two subsets: {a} and {}. Therefore, the power set of {a} in roster notation is {{}, {a}}.
(b) The set {1,2} has four subsets: {1,2}, {1}, {2}, and {}. Therefore, the power set of {1,2} in roster notation is {{}, {1}, {2}, {1,2}}.
It is important to note that the cardinality (number of elements) of the power set of a set with n elements is 2^n. For example, the set {1,2} has two elements, so its power set has 2^2 = 4 subsets. Similarly, the set {a} has one element, so its power set has 2^1 = 2 subsets.
In conclusion, writing out the power set in roster notation requires listing all the possible subsets of a set, including the empty set and the set itself. The number of subsets in a power set can be calculated using the formula 2^n, where n is the number of elements in the original set.

To know more about notation visit :

https://brainly.com/question/29132451

#SPJ11

A new school was recently built in the area. The entire cost of the project was $18,00, 000. The city put the project on a 30-year loan with APR of 2. 6%. There are 23,000 families that will be responsible for payments towards the loan Determine the amount army should be required to pay each year to cover the cost of the new school building round your answer to the nearest necessary

Answers

Therefore, each family should be required to pay approximately $41.70 per year to cover the cost of the new school building.

The total cost of the project = $18,000,000APR = 2.6%Number of families = 23,000The formula for calculating the annual payment is given as; `Annual payment = (PV × r(1 + r)ⁿ) / ((1 + r)ⁿ - 1)`Where, PV = Present value = $18,000,000r = Rate of interest per annum = APR / 100 = 2.6 / 100 = 0.026n = Number of years = 30Now, substituting the given values in the above formula, Annual payment `= (18,000,000 × 0.026(1 + 0.026)³⁰) / ((1 + 0.026)³⁰ - 1)`Annual payment `= $958,931.70`This is the total amount to be paid per year to cover the cost of the new school building. To determine the amount that each family should be required to pay each year, the total annual payment should be divided by the number of families. Therefore, Amount each family should pay per year = $958,931.70 / 23,000 ≈ $41.70 (rounded to the nearest necessary)

Know more about cost here:

https://brainly.com/question/29206601

#SPJ11

Which measurement is closest to the distance between Point M and Point J ?

Answers

3cm is the measurement that is closest to the distance between Point M and Point J

In the given figure, we can see that the distance between Point M and Point J can be measured by subtracting the distance between Point J and Point K from the distance between Point M and Point K.

That is Distance between Point M and Point J = the Distance between Point M and Point K - The distance between Point J and Point K.

Distance between Point M and Point K = 2.5 + 3.5 + 1.5 = 7.5cm.

Distance between Point J and Point K = 4.5cm.

Therefore, the Distance between Point M and Point J = 7.5 - 4.5 = 3cm.

Hence, 3cm is the measurement that is closest to the distance between Point M and Point J.

To learn about the distance here:

https://brainly.com/question/30395212

#SPJ11

The amounts of nicotine in a certain brand of cigarette are normally distributed with a mean of 0.962 g and a standard deviation of 0.297 g. The company that produces these cigarettes claims that it has now reduced the amount of nicotine. The supporting evidence consists of a sample of 33 cigarettes with a mean nicotine amount of 0.89 g. Assuming that the given mean and standard deviation have NOT changed, find the probability of randomly seleting 33 cigarettes with a mean of 0.89 g or less.

Answers

The probability of randomly selecting 33 cigarettes with a mean of 0.89 g or less is approximately 0.0287.

To find this probability, first calculate the z-score using the given mean, standard deviation, and sample size. The formula for the z-score is:

z = (x - μ) / (σ / √n)

where x is the sample mean, μ is the population mean, σ is the standard deviation, and n is the sample size.

Plugging in the values, we get:

z = (0.89 - 0.962) / (0.297 / √33) ≈ -2.18

Now, use a standard normal table or calculator to find the probability of a z-score less than or equal to -2.18. The result is approximately 0.0287, which is the probability of randomly selecting 33 cigarettes with a mean nicotine amount of 0.89 g or less.

To know more about probability click on below link:

https://brainly.com/question/30034780#

#SPJ11

You are testing H0: μ = 0 against Ha: μ ≠ 0 based on an SRS of 6 observations from a Normal population. What values of the t statistic are statistically significant at the α = 0.001 level?t > 6.869t < −5.893t > 5.893.t < −6.869t > 6.869.

Answers

To test the hypothesis H0: μ = 0 against Ha: μ ≠ 0 based on an SRS of 6 observations from a Normal population, we can use the t statistic. At the α = 0.001 level, the values of the t statistic that are statistically significant are t > 3.707 or t < -3.707.

In hypothesis testing, the t statistic is used to determine the significance of the difference between the sample mean and the hypothesized population mean. The t statistic follows a t-distribution with n-1 degrees of freedom, where n is the sample size.

To determine the values of the t statistic that are statistically significant at the α = 0.001 level, we need to find the critical values corresponding to the two-tailed test. Since the alternative hypothesis Ha: μ ≠ 0 is a two-tailed test, we divide the significance level α by 2 to obtain α/2 = 0.001/2 = 0.0005 for each tail.

Using a t-distribution table or statistical software, we can find the critical values corresponding to a tail area of 0.0005. For a sample size of 6, the critical values are t > 3.707 and t < -3.707.

Therefore, if the calculated t statistic falls outside the range of t > 3.707 or t < -3.707, we can reject the null hypothesis H0: μ = 0 at the α = 0.001 level and conclude that there is evidence of a statistically significant difference between the sample mean and the hypothesized population mean.

Learn more about hypothesis here:

https://brainly.com/question/31319397

#SPJ11

According to businessinsider. Com, the Eagles – "Their Greatest Hits (1971-1975)" album and Michael Jackson’s Thriller album are the two best-selling albums of all time. Together they sold 72 million copies. If

the number of Thriller albums sold is 15 more than one-half the number of Eagles albums sold, how many copies of each album were sold?

Answers

Let the number of Eagles albums sold be x, therefore number of Thriller albums sold would be `(x/2)+15`.

We know that Together Eagles – "Their Greatest Hits (1971-1975)" album and Michael Jackson’s Thriller album sold 72 million copies.Hence, we can form the equation:x + (x/2 + 15) = 72 million

2x + x + 30 = 144 million

3x = 144 million - 30 million

3x = 114 million

x = 38 million

Therefore, the number of Eagles albums sold was 38 million.

The number of Thriller albums sold would be `(x/2)+15

= (38/2)+15

= 19+15

= 34`.

Thus, 38 million copies of Eagles album and 34 million copies of Michael Jackson's Thriller album were sold.

To know more about cost estimate visit :-

https://brainly.in/question/40164367

#SPJ11

PLEASE HELPPPPPPPP

MATH QUESTION ON DESMOS

Answers

Answer:

2 and 3 only

Step-by-step explanation:

1 ) 10n = 103

    n = 103/10 = 10.3  

2) 5n = 15

    n  =  15/5 = 3    

3)  

[tex]\frac{1}{4}+n = \frac{13}{4}\\ n = \frac{13}{4}-\frac{1}{4}\\ n = \frac{13-1}{4}\\ n = \frac{12}{4} = 3[/tex]

4) n/2 = 6

    n = 12

5) n/3 = 3

   n = 9

5. are the following decays possible? if not, why not? a. 232 th 1z = 902 s 236 u1z = 922 a b. 238 pu 1z = 942 s 236 u1z = 922 a c. 11 b1z = 52 s 11 b1z = 52 g d. 33 p1z = 152 s 32 s1z = 162 e

Answers

a. The decay of 232Th to 236U through emission of a 1z = 90 2s particle is not possible.

b. The decay of 238Pu to 236U through emission of a 1z = 94 2s particle is possible.

c. The decay of 11B to 11B through emission of a 1z = 52 1s particle is not possible.

d. The decay of 33P to 32S through emission of a 1z = 152 1s particle is not possible.

e. No information is provided for decay e.

a. The decay of 232Th to 236U through emission of a 1z = 90 2s particle is not possible. This is because the atomic number of the daughter nucleus (236U) would be 92 (the same as uranium), and the mass number would be 238. Therefore, this decay violates the law of conservation of element.

b. The decay of 238Pu to 236U through emission of a 1z = 94 2s particle is possible. This is because the atomic number of the daughter nucleus (236U) would be 92 (uranium), and the mass number would be 234. Therefore, this decay is possible.

c. The decay of 11B to 11B through emission of a 1z = 52 1s particle is not possible. This is because the atomic number of the daughter nucleus (11B) would be the same as that of the parent nucleus, and the mass number would also remain the same. Therefore, this decay violates the law of conservation of mass and charge.

d. The decay of 33P to 32S through emission of a 1z = 152 1s particle is not possible. This is because the atomic number of the daughter nucleus (32S) would be less than that of the parent nucleus (33P). Therefore, this decay violates the law of conservation of charge.

e. No information is provided for decay e.

Know more about the law of conservation of charge.

https://brainly.com/question/28104401

#SPJ11

use the maclaurin series for ex to compute e -0.11 correct to five decimal places. e -0.11

Answers

To compute e^-0.11 using the Maclaurin series for ex, we can start by writing out the Maclaurin series for ex as: ex = 1 + x + x^2/2! + x^3/3! + ... Substituting x = -0.11, we get: e^-0.11 = 1 - 0.11 + 0.11^2/2! - 0.11^3/3! + ...

To compute e^-0.11 correct to five decimal places, we need to keep adding terms in the series until the fifth decimal place does not change. After some calculations, we get:

e^-0.11 = 0.89502 (correct to five decimal places)

Therefore, using the Maclaurin series for ex, we can compute e^-0.11 to five decimal places as 0.89502.
To compute e^(-0.11) using the Maclaurin series, you can follow these steps:

1. Recall the Maclaurin series for e^x: e^x = 1 + x + x^2/2! + x^3/3! + ... (where x = -0.11)
2. Substitute -0.11 for x and compute the first few terms of the series: 1 + (-0.11) + (-0.11)^2/2! + (-0.11)^3/3! + ...
3. Continue adding terms until the desired accuracy (five decimal places) is achieved. In this case, 6 terms should be sufficient.
4. Calculate e^(-0.11) ≈ 1 + (-0.11) + 0.0121/2 + (-0.001331)/6 + ...
5. Add the terms to get e^(-0.11) ≈ 0.89529.

So, e^(-0.11) is approximately 0.89529, correct to five decimal places.

To learn more about Maclaurin series: brainly.com/question/31745715

#SPJ11

Let T : R4 + R3 be a linear transformation such that T(ei) = -2 0 4 T(ez) = 1 -5 0 T(ez) = and T(e) = 0 -2 6 , where ei, ez, ez, and e4 are the standard basis vectors for R4. (a) Find the matrix A such that T can be expressed as T(x) = Ax. (b) - Find T -2 5 4 (c) Is T one-to-one? Why or why not? (d) Is T onto? Why or why not?

Answers

The matrix A is:
A = [-2 1 0; 0 -5 0; 4 0 0; 0 0 -2; 0 0 0; 0 0 6]
T(-2, 5, 4) = (-18, -25, -8, 4, 0, 24).

(a) To find the matrix A, we need to find the image of each basis vector under T and write them as columns of a matrix. Therefore, we have:

T(e1) = (-2, 0, 4, 0, 0, 0)T
T(e2) = (1, -5, 0, 0, 0, 0)T
T(e3) = (0, 0, 0, -2, 0, 6)T


(b) To find T(-2, 5, 4), we simply need to multiply the matrix A by the vector (-2, 5, 4, 0, 0, 0)T, i.e.,

T(-2, 5, 4) = [-2 1 0; 0 -5 0; 4 0 0; 0 0 -2; 0 0 0; 0 0 6] * [-2; 5; 4] = [-18; -25; -8; 4; 0; 24]



(c) To determine whether T is one-to-one or not, we need to check if the nullspace of A is trivial or not. The nullspace of A is the set of all vectors x such that Ax = 0. We can find the nullspace of A by row reducing the augmented matrix [A|0].

However, we can see that the rank of A is 3, which means that the nullspace of A is non-trivial, and hence, T is not one-to-one.

(d) To determine whether T is onto or not, we need to check if the range of T is equal to R3 or not. Since the columns of A span R3,

we can conclude that the range of T is equal to the column space of A, which is a subspace of R3. Therefore, T is not onto.

To learn more about : matrix

https://brainly.com/question/1279486

#SPJ11

Last year, Chapman Elementary School's population was 670 students. This year, after rezoning, the population is 603 students. What is the percent of decrease in the student population?

Answers

The student population at Chapman Elementary School decreased by approximately 10% after rezoning. This corresponds to a decrease of 67 students from the previous year's population of 670.

In order to calculate the percent decrease in the student population, we can use the following formula:

Percent decrease = ((Initial population - Final population) / Initial population) * 100

Substituting the given values into the formula, we get:

Percent decrease = ((670 - 603) / 670) * 100

= (67 / 670) * 100

= 0.1 * 100

= 10%

Therefore, the percent decrease in the student population at Chapman Elementary School after rezoning is 10%. This indicates that the student population decreased by 10% from the previous year's count of 670 students, resulting in a current population of 603 students.

Learn more about Percent here:

https://brainly.com/question/31323953

#SPJ11

In order for cars to overcome centrifugal force on roadways which are circular arcs of radius r, the road is banked at an angle x from the horizon. The banking angle must satisfy the equation: rg(tanx)=v^2 where v is the velocity of the cars and g=9.8m/s^2 is the acceleration due to gravity. What is the rate of changing banking angle when the cars are accelerating at 2m/s^2, banking angle is at 45 degrees, velocity is 80km/h and the radius of the arc is 20m.

Answers

The rate of change of the banking angle when the cars are accelerating at 2 m/s², banking angle is at 45 degrees, velocity is 80 km/h, and the radius of the arc is 20 m is approximately 0.454 radians/s.

The chain rule of differentiation to calculate the rate of change of the banking angle.

Let v be the speed, r be the radius, and x be the banking angle.

Next, we have

v2 = rg(tan x)

r[g(sec2 x)(dx/dt)] + g(tan x)(dr/dt) = 2v(dv/dt) is the result of differentiating both sides with regard to time t.

Using the values supplied, we can reduce the equation as follows:

v = 80 km/h

= 22.22 m/s dv/dt

= 2 m/s2 r

= 20 m g

= 9.8 m/s2 x

= 45 degrees

= /4 radians

When we enter these numbers into the equation, we obtain:

20(9.8(sec2 /4)(dx/dt) plus 9.8(tan /4)(dr/dt) equals 2(22.22).(2)

To put it simply, we obtain 196(dx/dt) plus 98(dr/dt) = 88.88.

We must provide a solution for the banking angle change rate (dx/dt) using the radius change rate (dr/dt).

Rearranging

For similar questions on velocity

https://brainly.com/question/25749514

#SPJ11

evaluate exactly, using the fundamental theorem of calculus: ∫b0 (x^6/3 6x)dx

Answers

The exact value of the integral ∫b0 (x^6/3 * 6x) dx is b^8.

The Fundamental Theorem of Calculus (FTC) is a theorem that connects the two branches of calculus: differential calculus and integral calculus. It states that differentiation and integration are inverse operations of each other, which means that differentiation "undoes" integration and integration "undoes" differentiation.

The first part of the FTC (also called the evaluation theorem) states that if a function f(x) is continuous on the closed interval [a, b] and F(x) is an antiderivative of f(x) on that interval, then:

∫ab f(x) dx = F(b) - F(a)

In other words, the definite integral of a function f(x) over an interval [a, b] can be evaluated by finding any antiderivative F(x) of f(x), and then plugging in the endpoints b and a and taking their difference.

The second part of the FTC (also called the differentiation theorem) states that if a function f(x) is continuous on an open interval I, and if F(x) is any antiderivative of f(x) on I, then:

d/dx ∫u(x) v(x) f(t) dt = u(x) f(v(x)) - v(x) f(u(x))

In other words, the derivative of a definite integral of a function f(x) with respect to x can be obtained by evaluating the integrand at the upper and lower limits of integration u(x) and v(x), respectively, and then multiplying by the corresponding derivative of u(x) and v(x) and subtracting.

Both parts of the FTC are fundamental to many applications of calculus in science, engineering, and mathematics.

Let's start by finding the antiderivative of the integrand:

∫ (x^6/3 * 6x) dx = ∫ 2x^7 dx = x^8 + C

Using the Fundamental Theorem of Calculus, we have:

∫b0 (x^6/3 * 6x) dx = [x^8]b0 = b^8 - 0^8 = b^8

Therefore, the exact value of the integral ∫b0 (x^6/3 * 6x) dx is b^8.

To know more about integral visit:

brainly.com/question/30094386

#SPJ11

Mr. And Mrs. Smith decided to purchase a washing machine. It is marked at $2000. 00 for a cash payment or on HIRE PURCHASE plan with a 20% down-payment and 12 equal monthly installments of $160

Answers

If Mr. and Mrs. Smith choose the hire purchase plan, the total cost of the washing machine will be $2320.00.

If Mr. and Mrs. Smith decide to purchase the washing machine on a hire purchase plan, they have two options: making a cash payment or choosing the hire purchase plan with a down payment and monthly installments.

Cash Payment:

If they choose to make a cash payment, they will pay the full price of $2000.00 upfront, and they will own the washing machine immediately.

Hire Purchase Plan:

If they opt for the hire purchase plan, they need to make a down payment and pay equal monthly installments. Here are the details:

Down Payment:

The down payment is 20% of the total price, which is $2000.00. So, 20% of $2000.00 is:

Down payment = 20/100 ×$2000.00 = $400.00

Monthly Installments:

The remaining amount after the down payment is $2000.00 - $400.00 = $1600.00.

They will pay this remaining amount in 12 equal monthly installments of $160.00 each.

Total Cost:

To calculate the total cost, we need to add the down payment to the sum of the monthly installments:

Total Cost = Down Payment + (Monthly Installments x Number of Months)

Total Cost = $400.00 + ($160.00 x 12) = $400.00 + $1920.00 = $2320.00

Therefore, if Mr. and Mrs. Smith choose the hire purchase plan, the total cost of the washing machine will be $2320.00.

Learn more about  total cost here:

https://brainly.com/question/26367109

#SPJ11

Use Part 1 of the Fundamental Theorem of Calculus to find the derivative of the function. x2 h(x) = / V3+ p dr - n(x) = { / 3 + 3 or 3 h'(x) =

Answers

The derivative of the function h(x) = ∫[3+√(x)]^3 n(r) dr can be found using Part 1 of the Fundamental Theorem of Calculus. The result is h'(x) = n([3+√(x)]) * [3+√(x)]^2.

According to Part 1 of the Fundamental Theorem of Calculus, if a function h(x) is defined as the integral of another function n(r) with respect to r over a certain interval, then the derivative of h(x) with respect to x can be found by evaluating the integrand at the upper limit of integration and multiplying it by the derivative of the upper limit with respect to x.

In this case, the function h(x) is defined as the integral of n(r) with respect to r, where the lower limit is a constant 3 and the upper limit is 3+√(x). To find h'(x), we evaluate n(r) at the upper limit of integration, which is [3+√(x)], and multiply it by the derivative of the upper limit with respect to x, which is 2√(x).

Therefore, h'(x) = n([3+√(x)]) * 2√(x) = 2√(x) * n([3+√(x)]) = n([3+√(x)]) * [3+√(x)]^2.

To learn more about upper limit click here, brainly.com/question/14424096

#SPJ11

let h be the function defined by h(x)=g(x)/x^2 1. find h'(1)

Answers

h'(1) is equal to (g'(1) - 2g(1)). To find the specific value of h'(1), you would need to know the explicit form or additional information about the function g(x) and evaluate it at x = 1.

To find h'(1), we will differentiate h(x) using the quotient rule and then substitute x = 1 into the derivative expression.

Using the quotient rule, the derivative of h(x) = g(x)/[tex]x^{2}[/tex] is given by:

h'(x) = (g'(x) × [tex]x^{2}[/tex] - g(x) × 2x) / [tex](x^{2})^{2}[/tex]

= (g'(x) × x^2 - 2g(x) × x) / [tex]x^{4}[/tex]

= ([tex]x^{2}[/tex] × g'(x) - 2x × g(x)) / [tex]x^{4}[/tex]

= (x × (x × g'(x) - 2g(x))) / x^4

= (x × (x × g'(x) - 2g(x))) / ([tex]x^{2}[/tex] × [tex]x^{2}[/tex])

= (x × (x × g'(x) - 2g(x))) / ([tex]x^{2}[/tex])

Now, substitute x = 1 into the derivative expression:

h'(1) = (1 × (1 × g'(1) - 2g(1))) / (1)

= (g'(1) - 2g(1))

Learn more about quotient rule here:

https://brainly.com/question/30278964

#SPJ11

evaluate the iterated triple integral ∫10∫1 x√x√∫xy0y−1zdzdy,dx=

Answers

The evaluation of the given iterated triple integral is (8/25) * [8√z[tex]^(5/2)[/tex] - z[tex]^(5/2)[/tex]].

How to evaluate the given iterated triple integral?

To evaluate the given iterated triple integral ∫∫∫ x√(x)√(∫zdy)dzdydx, we can start by integrating the innermost integral with respect to y.

∫zdy = zy

Next, we substitute the limits of integration for y, which are y = 0 to y = x.

∫zdy = ∫(zy)dy = 1/2z(x[tex]^2[/tex] - 0^2) = 1/2zx[tex]^2[/tex]

Now, we have the expression x√(x)√(∫zdy) = x√(x)√(1/2zx[tex]^2[/tex]) = x^(3/2)√(1/2z).

Moving to the second integral, we integrate the expression x√(x)√(1/2z) with respect to z.

∫x[tex]^(3/2)[/tex]√(1/2z)dz

To simplify this integral, we can take out the constants outside the integral:

(1/2)∫x[tex]^(3/2)[/tex]√(1/z)dz

Now, we can integrate √(1/z) with respect to z:

(1/2)∫x[tex]^(3/2)[/tex] * 2√z dz = ∫x^(3/2)√z dz = (2/5)x[tex]^(3/2)[/tex]z[tex]^(5/2)[/tex]

Finally, we integrate the expression (2/5)x[tex]^(3/2)[/tex]z with [tex]^(5/2)[/tex]respect to x over the given limits x = 1 to x = 10.

∫10∫1 (2/5)x[tex]^(3/2)[/tex]z dx[tex]^(5/2)[/tex]

Substituting the limits and integrating:

(2/5)∫10∫1 x[tex]^(3/2)[/tex]z[tex]^(5/2)[/tex] dx = (2/5) * [(2/5)x[tex]^(5/2)[/tex]z[tex]^(5/2)[/tex]] evaluated from x = 1 to x = 10

= (2/5) * [(2/5)(10)[tex]^(5/2)[/tex])z - (2/5[tex]^(5/2)[/tex])(1)[tex]^(5/2)[/tex]z][tex]^(5/2)[/tex]

= (2/5) * [(2/5)(100√z - 2/5[tex]^(5/2)[/tex])z][tex]^(5/2)[/tex]

= (2/5) * [40√z[tex]^(5/2)[/tex] - 2z[tex]^(5/2)[/tex]]

= (8/25) * [8√z - z][tex]^(5/2)[/tex]

Therefore, the evaluation of the given iterated triple integral ∫∫∫ x√(x)√(∫zdy)dzdydx is (8/25) * [8√z[tex]^(5/2)[/tex] - z].[tex]^(5/2)[/tex]

Learn more about integrating

brainly.com/question/30900582

#SPJ11

Find the work done by the force field F(x, y) = xi + (y + 4)j in moving an object along an arch of the cycloid
r(t) = (t − sin t)i + (1 − cos t)j, 0 ≤ t ≤ 2π.
Note: what is
F · dr = leftangle0.gift − sin t, 5 − cos t
rightangle0.gif·
leftangle0.gif1 − cos t, sin t
rightangle0.gif
?

Answers

Therefore, the work done by the force field F is 10π given by the line integral.

The work done by the force field F along the arch of the cycloid is given by the line integral of F·dr over the curve r(t), i.e.,

W = ∫C F · dr = ∫0^2π F(r(t)) · r'(t) dt

Using the given values of F(x,y) and r(t), we can compute F(r(t)) · r'(t) as follows:

F(r(t)) · r'(t) = (t - sin(t))i + (5 - cos(t))j · (cos(t)i + sin(t)j)

= (t - sin(t))cos(t) + (5 - cos(t))sin(t)

Hence, we have:

W = ∫0^2π [(t - sin(t))cos(t) + (5 - cos(t))sin(t)] dt

integration by parts, we can evaluate this integral to get:

W = [t sin(t) + (5 - cos(t))cos(t)]|0^2π

= 10π

To know more about line integral,

https://brainly.com/question/30640493

#SPJ11

Other Questions
I can't speak for anyone else, but spaghetti and meatballs are my favourite meal. I savour the flavour of Italian food whenever I can, to be honest, but it seem to me that the ability to even rustle up a simple rustic dish is becoming a lost art. That's why I was dubious when I were asked to try a new range of student saver meals from Kirkby Farm Foods If it takes 1/2 hour to walk 2/7 of a field, how long will it take to walk the whole field In The Importance of Being Earnest, by Oscar Wilde, there are two parallel plots, Jackfaces many obstacles to his romantic union with Gwendolen. One obstacle ispresented by Lady Bracknell, who objects to what she refers to as Jack's "origin" (.e.his inability to define his family background). Another obstacle is Gwendolen'sobsession with the name "Ernest" since she does not know Jack's real name. Whateffect do these two parallel plots most likely on the text?It creates tension since is seems unlikely that Jack will be able to marryGwendolenIt creates surprise since Jack is not really Earnest.It creates mystery about Jack and Gwendolen's future.It creates humor since both men are pretending to be the same fictionalCharacterQuestion 3 (2 points)In The Importance of Being Earnest, by Oscar Wilde, both Jack and Algernon pretendto be Earnest Worthing, and as Earnest Worthing become engaged to two different How might a large change in temperature cause the need for more Oil usage? Which of these provides evidence of the common ancestry of all life?A.Ubiquitous use of catalysts by living systemsB.Near universality of the genetic codeC.Structure of the nucleusD.The flow of genetic information from DNA to RNA to proteinE. The directionality of protein synthesis Hello My name Is Chloe, Do you think you can help me with My Question I need Facts on sharks.I'm doing a report for school.Thanks:) Explain what the core muscles do and why it's important to have a strong set of core muscles.Please help. Write a news paper reportA horrible accident took place on highway between a tanker and a car This is Economicsexplore an environmental issue that your community or country is facing. Consider a challenge that has resulted in externalities affecting you and your local area. Choose an issue that you feel strongly about, and consider how the issue relates to poverty.Make sure that you address these questions:What is the issue?What externalities does the issue raise?How is the issue connected to poverty?What helpful action can your viewers take? SchoolPLEASE HELP WITH THIS QUESTION: One week Tony bought 6 soft shell tacos and 2 hard shell tacos for $12. The next week he bought 3 soft shell tacos and 1 hard shells tacos for $6. Write a system to find the cost for each type of taco. Explain your answer. 5 pos. 1. An excess of sodium sulfate was added to a 500. mL sample of polluted water. Themass of lead (II) sulfate that precipitatcd was 308.88 mg. Determine the mass of lead that was inthe polluted water.Na2SO4(aq) + Pb2+ (aq) 2Na(aq) + PbSO4(s) What is 3/4. Of 44 in the amazing mathematics 2. Create a poster on how one should be careful around animals and avoid animal attack.Remember, a poster must havea sloganb. a picturea few words should religious belief influence law,five paragraph argument. How many kids are there in the US 4. Which statement is an example of howenvironmental factors affect gene expression?A. Your finger becomes callus from writing with apencilB. The amounts of sun, water, and nutrients affect thegrowth of a plantC. Parents with red hair have a child with red hairD. A red snapdragon flower is crossed with a whitesnapdragon flower to produce a pink snapdragon flower. A car dealer is interested in comparing the average gas mileages of four different car models. The dealer believes that the average gas mileage of a particular car will vary depending on the person who is driving the car due to different driving styles. Because of this, he decides to use a randomized block design. He randomly selects five drivers and asks them to drive each of the cars. He then determines the average gas mileage for each car and each driver. Can the dealer conclude that there is a significant difference in average gas mileages of the four car models? The results of the study are as follows.Find the value of the F-test statistic for testing whether the average gas mileage is the same for the four car models. Round your answer to two decimal places, if necessary. Car A Car B Car C Car DDriver 1 23 39 22 25Driver 2 37 39 28 39Driver 3 39 40 21 25Driver 4 34 36 27 33Driver 5 27 35 26 37Required:Make the decision to reject or fail to reject the null hypothesis that there is no difference in the average gas mileages of the four car models. State the conclusion in terms of the original problem. Use alpha = 0.01.a. We reject the null hypothesis. At the 0.01 level of significance, there is sufficient evidence of a difference in average gas mileages of the four car models.b. We fail to reject the null hypothesis. At the 0.01 level of significance, there is not sufficient evidence of a difference in average gas mileages of the four car models.c. We fail to reject the null hypothesis. At the 0.01 level of significance, there is sufficient evidence of a difference in average gas mileages of the four car models.d. We reject the null hypothesis. At the 0.01 level of significance, there is not sufficient evidence of a difference in average gas mileages of the four car models. Explain how what is perceived can be different from what is sensed, including how attention and environmental cues can affect the ability to accurately sense and perceive the world. Why did the USSR disallow US help in Poland and Czechoslovakia? 6. Simplify the expression.3n+5-12n-8+6p