Answers
Answer:
Step-by-step explanation:
Related Questions
A 4-column table with 3 rows. Column 1 has entries swim, do not swim, total. Column 2 is labeled softball with entries a, c, 20. Column 3 is labeled no softball with entries b, 5, e. Column 4 is labeled Total with entries 22, d, 32. A summer camp has 32 campers. 22 of them swim, 20 play softball, and 5 do not play softball or swim. Which values correctly complete the table? a = 15, b = 10, c = 7, d = 5, e = 12 a = 15, b = 7, c = 5, d = 10, e = 12 a = 14, b = 7, c = 5, d = 12, e = 10 a = 14, b = 12, c = 7, d = 5, e = 10.
Answers
The correct values to complete the table are: a = 15, b = 7, c = 5, d = 10, e = 12.
For entry a, which represents the number of campers who both swim and play softball, we can subtract the number of campers who play softball (20) from the total number of campers who swim (22). So, a = 22 - 20 = 2.
For entry b, which represents the number of campers who do not play softball but swim, we can subtract the number of campers who both swim and play softball (a = 2) from the total number of campers who swim (22). So, b = 22 - 2 = 20.
For entry c, which represents the total number of campers who play softball, we already have the value of 20 given in the table.
For entry d, which represents the total number of campers, we already have the value of 32 given in the table.
For entry e, which represents the number of campers who do not play softball, we can subtract the number of campers who do not play softball but swim (b = 20) from the total number of campers who do not play softball (5). So, e = 5 - 20 = -15. However, since it is not possible to have a negative value for the number of campers, we can consider e = 0.
To know more about values,
https://brainly.com/question/8781122
#SPJ11
thevenin's theorem states that the thevenin voltage is equal to:
Answers
Thevenin's theorem states that the Thevenin voltage is equal to the open circuit voltage between two terminals of a linear, passive circuit.
In other words, it is the voltage difference measured between the two terminals when no current is flowing between them. The Thevenin voltage is often used as a simplified representation of a complex circuit when the circuit is being analyzed or modeled. By finding the Thevenin voltage and resistance, a complex circuit can be reduced to a single voltage source and a single resistor, making it much easier to analyze.
The theorem is named after French electrical engineer Léon Charles Thévenin, who first published the concept in 1883.
Learn more about theorem here:
https://brainly.com/question/30066983
#SPJ11
Find the radius of convergence, R, of the series. (-1)n(x- 6)n 3n 1 n=0 R= Find the interval, I, of convergence of the series. (Enter your answer using interval notation.) -1 points Find the radius of convergence, R, of the series. n=1 R= Find the interval, I, of convergence of the series. (Enter your answer using interval notation.)
Answers
To find the radius of convergence, we can use the ratio test:
lim |(-1)^(n+1)(x-6)^(n+1) 3^(n+1) / ((n+1) x^n 3^n)|
= |(x-6)/3| lim |(-1)^n / (n+1)|
Since the limit of the absolute value of the ratio of consecutive terms is a constant, the series converges absolutely if |(x-6)/3| < 1, and diverges if |(x-6)/3| > 1. Therefore, the radius of convergence is R = 3.
To find the interval of convergence, we need to check the endpoints x = 3 and x = 9. When x = 3, the series becomes:
∑ (-1)^n (3-6)^n 3^n = ∑ (-3)^n 3^n
which is an alternating series that converges by the alternating series test. When x = 9, the series becomes:
∑ (-1)^n (9-6)^n 3^n = ∑ 3^n
which is a divergent geometric series. Therefore, the interval of convergence is [3, 9), since the series converges at x = 3 and diverges at x = 9.
To know more about radius of convergence, refer here:
https://brainly.com/question/28158009#
#SPJ11
A plane flies against the wind 288 miles from San Jose and then returns home with the same wind. The wind speed is 60m / h. The total flying time was 2 hours , what is the speed of the plane ?
Answers
The speed of the plane is 12.5 mph.
The speed of the wind is given as 60 mph.
According to the problem,
Time taken to travel the distance against the wind + Time taken to travel the same distance with the wind = Total time taken to travel both distances
Let's find out the time taken to travel a distance against the wind:
Distance = 288 miles
Speed = (x - 60) mph
Time = Distance / Speed
Time taken to travel 288 miles against the wind = 288 / (x - 60)
Similarly, Time taken to travel 288 miles with the wind = 288 / (x + 60)
According to the problem, the total flying time was 2 hours.
Hence,288 / (x - 60) + 288 / (x + 60) = 2
Multiplying the whole equation by (x - 60) (x + 60), we get
288 (x + 60) + 288 (x - 60) = 2 (x - 60) (x + 60)
576x = 7200x = 12.5 mph
Therefore, the speed of the plane is 12.5 mph.
To know more about speed, click here
https://brainly.com/question/28224010
#SPJ11
Problem 5: If there is a 50-50 chance of rain today, compute the probability that it will rain in 3 days from now if a = .7 and 8 = .3. I . Problem 6: Compute the invariant distribution for the previous problem.
Answers
Problem 5: There is a 65% chance of rain in 3 days, considering the given probabilities.
Problem 6: The invariant distribution for the probability of rain (P(R)) is 7/9 or approximately 0.778, and the invariant distribution for the probability of no rain (P(NR)) is 2/9 or approximately 0.222.
To approach this problem, we can break it down into smaller steps:
Since the chance of rain today is 50-50, the probability of no rain today is also 50-50 or 0.5.
We know that the probability of no rain in 3 days, given no rain today, is represented by 'a.' Therefore, the probability of no rain in 3 days is 0.7.
Using the principle of complements, we can find the probability of rain in 3 days, given no rain today, by subtracting the probability of no rain from 1. Therefore, the probability of rain in 3 days, given no rain today, is 1 - 0.7 = 0.3.
To calculate the final probability of rain in 3 days, we need to consider two cases: rain today and no rain today. We multiply the probability of rain today (0.5) by the probability of rain in 3 days, given rain today (1), and add it to the product of the probability of no rain today (0.5) and the probability of rain in 3 days, given no rain today (0.3).
Hence, the final probability of rain in 3 days is (0.5 * 1) + (0.5 * 0.3) = 0.65.
To find the invariant distribution, we can set up a system of equations. Let P(R) represent the probability of rain and P(NR) represent the probability of no rain. Since the probabilities should remain constant over time, we have the following equations:
P(R) = 0.5 * P(R) + 0.3 * P(NR)
P(NR) = 0.5 * P(R) + 0.7 * P(NR)
Simplifying these equations, we get:
0.5 * P(R) - 0.3 * P(NR) = 0
-0.5 * P(R) + 0.3 * P(NR) = 0
To solve this system, we can express it in matrix form as:
[0.5 -0.3] [P(R)] = [0]
Apologies for the incomplete response. Let's continue solving the system of equations for Problem 6.
We have the matrix equation:
[0.5 -0.3] [P(R)] = [0]
[-0.5 0.7] [P(NR)] = [0]
To find the invariant distribution, we need to solve this system of equations. We can rewrite the system as:
0.5P(R) - 0.3P(NR) = 0
-0.5P(R) + 0.7P(NR) = 0
To eliminate the coefficients, we can multiply the first equation by 10 and the second equation by 14:
5P(R) - 3P(NR) = 0
-7P(R) + 10P(NR) = 0
Now, we can add the equations together:
5P(R) - 3P(NR) + (-7P(R)) + 10P(NR) = 0
Simplifying, we have:
-2P(R) + 7P(NR) = 0
This equation tells us that -2 times the probability of rain plus 7 times the probability of no rain is equal to 0.
We can rewrite this equation as:
7P(NR) = 2P(R)
Now, we know that the sum of probabilities must be equal to 1, so we have the equation:
P(R) + P(NR) = 1
Substituting the relationship we found between P(R) and P(NR), we have:
P(R) + 2P(R)/7 = 1
Multiplying through by 7, we get:
7P(R) + 2P(R) = 7
Combining like terms:
9P(R) = 7
Dividing by 9, we find:
P(R) = 7/9
Similarly, we can find P(NR) using the equation P(R) + P(NR) = 1:
7/9 + P(NR) = 1
Subtracting 7/9 from both sides:
P(NR) = 2/9
To know more about probability here
https://brainly.com/question/11234923
#SPJ4
The walls of a bathroom are to be covered with walls tiles 15cm by 15cm. How many times les are needed for a bathroom 2. 7 long ,2. 25cm wide and 3m high
Answers
To calculate the number of tiles needed for the walls of a bathroom, we need to determine the total area of the walls and divide it by the area of each tile.
Given:
Length of the bathroom = 2.7 meters
Width of the bathroom = 2.25 meters
Height of the bathroom = 3 meters
Size of each tile = 15cm by 15cm = 0.15 meters by 0.15 meters
First, let's calculate the total area of the walls:
Total wall area = (Length × Height) + (Width × Height) - (Floor area)
Floor area = Length × Width = 2.7m × 2.25m = 6.075 square meters
Total wall area = (2.7m × 3m) + (2.25m × 3m) - 6.075 square meters
= 8.1 square meters + 6.75 square meters - 6.075 square meters
= 8.775 square meters
Next, we calculate the area of each tile:
Area of each tile = 0.15m × 0.15m = 0.0225 square meters
Finally, we divide the total wall area by the area of each tile to find the number of tiles needed:
Number of tiles = Total wall area / Area of each tile
= 8.775 square meters / 0.0225 square meters
= 390 tiles (approximately)
Therefore, approximately 390 tiles are needed to cover the walls of the given bathroom.
Learn more about tiles problem here:
https://brainly.com/question/30382899
#SPJ11
Emilio took a random sample of n=12 giant Pacific octopi and tracked them to calculate their mean lifespan. Their lifespans were roughly symmetric, with a mean of x= 4 years and a standard deviation of 8x=0.5 years. He wants to use this data to construct a t interval for the mean lifespan of this type of octopus with 90% confidence.What critical value t* should Emilio use? t = 1.356 t = 1.363 t = 1.645 t = 1.782 t = 1.796
Answers
Emilio should use t* = 1.796 to construct his t interval for the mean lifespan of the giant Pacific octopi with 90% confidence.
To construct a t interval for the mean lifespan of the giant Pacific octopi with 90% confidence, Emilio needs to find the critical value t*. Since the sample size n = 12 is small, he should use the t-distribution instead of the normal distribution.
To find t*, Emilio can use a t-table or a calculator. Since the confidence level is 90%, he needs to find the value of t* such that the area to the right of t* in the t-distribution with n-1 degrees of freedom is 0.05.
Using a t-table with 11 degrees of freedom (n-1), we find that the critical value t* is approximately 1.796. Therefore, Emilio should use t* = 1.796 to construct his t interval for the mean lifespan of the giant Pacific octopi with 90% confidence.
To know more about t interval refer to-
https://brainly.com/question/14529112
#SPJ11
The number of ways a group of 12, including 4 boys and 8 girls, be formed into two 6-person volleyball team
a) With no restriction
Answers
There are 924 ways to form two 6-person volleyball teams from the group with no restrictions.
There are several ways to form two 6-person volleyball teams from a group of 12 people, including 4 boys and 8 girls. One way is to simply choose any 6 people from the group to form the first team, and then the remaining 6 people would form the second team. Since there are 12 people in total, there are a total of 12C6 ways to choose the first team, which is the same as the number of ways to choose the second team. Therefore, the total number of ways to form two 6-person volleyball teams with no restriction is:
12C6 x 12C6 = 924 x 924 = 854,616
b) With a restriction
If there is a restriction on the number of boys or girls that can be on each team, then the number of ways to form the teams would be different. For example, if each team must have exactly 2 boys and 4 girls, then we would need to count the number of ways to choose 2 boys from the 4 boys, and then choose 4 girls from the 8 girls. The number of ways to do this is:
4C2 x 8C4 = 6 x 70 = 420
Then, once we have chosen the 2 boys and 4 girls for one team, the remaining 2 boys and 4 girls would automatically form the second team. Therefore, there is only one way to form the second team. Thus, the total number of ways to form two 6-person volleyball teams with the restriction that each team must have exactly 2 boys and 4 girls is:
420 x 1 = 420
In summary, the number of ways to form two 6-person volleyball teams from a group of 12 people, including 4 boys and 8 girls, depends on whether there is a restriction on the composition of each team. Without any restriction, there are 854,616 ways to form the teams, while with the restriction that each team must have exactly 2 boys and 4 girls, there is only 420 ways to form the teams.
To know more about volleyball visit:
https://brainly.com/question/14243282
#SPJ11
The domain of the function is {-3, -1, 2, 4, 5}. What is the function's range?
The range for the given domain of the function is
Answers
The function's range is { -3, 1, 2, 14, 23 } for the given domain of the function { -3, -1, 2, 4, 5 }.
Given the domain of the function as {-3, -1, 2, 4, 5}, we are to find the function's range. In mathematics, the range of a function is the set of output values produced by the function for each input value.
The range of a function is denoted by the letter Y.The range of a function is given by finding the set of all possible output values. The range of a function is dependent on the domain of the function. It can be obtained by replacing the domain of the function in the function's rule and finding the output values.
Let's determine the range of the given function by considering each element of the domain of the function.i. When x = -3,-5 + 2 = -3ii. When x = -1,-1 + 2 = 1iii.
When x = 2,2² - 2 = 2iv. When x = 4,4² - 2 = 14v. When x = 5,5² - 2 = 23
Therefore, the function's range is { -3, 1, 2, 14, 23 } for the given domain of the function { -3, -1, 2, 4, 5 }.
Know more about range here,
https://brainly.com/question/29204101
#SPJ11
El mástil de un velero se halla unido a la proa y a la popa por dos cables que forman con cubierta, ángulos de 45 y 60, respectivamente. si el barco tiene una longitud de 25 m, cuál es la altura del mástil?
Answers
Given,Length of the ship = 25 m∠ACB = 45°∠ACD = 60°
Let's assume the height of the mast be y.
CD = height of the mast
By using the trigonometric ratios we can find the height of the mast.
Using the tangent ratio, we can write,
tan(60°) = height of the mast / AC
Therefore, height of the mast = AC × tan(60°)
Using the sine ratio, we can write, sin(45°) = height of the mast / AC
Therefore, height of the mast = AC × sin(45°)
Solve the above two equations for [tex]ACAC × tan(60°) = AC × sin(45°)AC = (height of the mast) / tan(60°) = (height of the mast) / √3AC = (height of the mast) / sin(45°)Height of the mast = AC × √3[/tex]
From the figure, we can write,[tex]AC² = AD² + CD²AD = length of the ship = 25 mAC² = (25)² + (CD)²AC² = 625 + (CD)²AC = √(625 + CD²)[/tex]
Now,Height of the mast = AC × √3Height of the mast = √(625 + CD²) × √3
Simplify,Height of the mast = 5√(37 + CD²) m
So, the height of the mast is 5√(37 + CD²) m.
To know more about trigonometric ratios, visit:
https://brainly.com/question/23130410
#SPJ11
Let T be the linear transformation defined by
T(x1,x2,x3,x4,x5)=−6x1+7x2+9x3+8x4.
Its associated matrix A is an n×m matrix,
where n=? and m=?
Answers
The linear transformation for the given A has 1 row and 5 columns, we have n=1 and m=5.
Let T be the linear transformation defined by T(x1,x2,x3,x4,x5)=−6x1+7x2+9x3+8x4. To find the associated matrix A, we need to consider the image of the standard basis vectors under T. The standard basis vectors for R^5 are e1=(1,0,0,0,0), e2=(0,1,0,0,0), e3=(0,0,1,0,0), e4=(0,0,0,1,0), and e5=(0,0,0,0,1).
T(e1) = T(1,0,0,0,0) = -6(1) + 7(0) + 9(0) + 8(0) = -6
T(e2) = T(0,1,0,0,0) = -6(0) + 7(1) + 9(0) + 8(0) = 7
T(e3) = T(0,0,1,0,0) = -6(0) + 7(0) + 9(1) + 8(0) = 9
T(e4) = T(0,0,0,1,0) = -6(0) + 7(0) + 9(0) + 8(1) = 8
T(e5) = T(0,0,0,0,1) = -6(0) + 7(0) + 9(0) + 8(0) = 0
Therefore, the associated matrix A is given by
A = [T(e1) T(e2) T(e3) T(e4) T(e5)] =
[-6 7 9 8 0].
Since A has 1 row and 5 columns, we have n=1 and m=5.
Learn more on linear transformation here:
https://brainly.com/question/30514241
#SPJ11
The sine curve y = a sin(k(x − b)) has amplitude _____, period ______, and horizontal shift ______. The sine curve y = 2 sin 7 x − π 4 has amplitude _____, period ______, and horizontal shift ________.
Answers
The sine curve y = a sin(k(x − b)) is a mathematical function that describes the shape of a wave or vibration. It is characterized by three main parameters: amplitude, period, and horizontal shift.
The amplitude of a sine curve is the maximum displacement of the curve from its equilibrium position. It is represented by the coefficient 'a' in the equation. Therefore, the amplitude of the sine curve y = a sin(k(x − b)) is 'a'.
The period of a sine curve is the length of one complete cycle of the curve. It is given by the formula 2π/k, where 'k' is the coefficient of x in the equation. Thus, the period of the sine curve y = a sin(k(x − b)) is 2π/k.
The horizontal shift of a sine curve is the displacement of the curve from its standard position along the x-axis. It is given by the value of 'b' in the equation. Thus, the horizontal shift of the sine curve y = a sin(k(x − b)) is 'b'.
Now, let's consider the sine curve y = 2 sin 7 x − π/4. Here, the amplitude is 2, as it is the coefficient 'a'. The period is 2π/7, as 'k' is 7. The horizontal shift is π/28, as 'b' is -π/4.
To summarize, the sine curve y = a sin(k(x − b)) has amplitude 'a', period 2π/k, and horizontal shift 'b'. For the sine curve y = 2 sin 7 x − π/4, the amplitude is 2, the period is 2π/7, and the horizontal shift is -π/4.
Learn more about amplitude here:
https://brainly.com/question/8662436
#SPJ11
"Could you change $2 for me for the parking meter?" Inquired a young woman. "Sure," I replied, knowing I had more than $2 change in my pocket.
In actual fact, however, although I did have more than $2 in change, I could not give the woman $2.
What is the largest amount of change I could have in my pocket without being able to give $2 exactly?
Answers
In this scenario, the total amount of change is 75 cents (quarters) + 40 cents (dimes) + 20 cents (nickels) = 135 cents. This is the largest amount of change one can have without being able to give $2 exactly, using common U.S. coin denominations.
Based on question, we need to determine the largest amount of change someone can have without being able to give $2 exactly.
To solve this problem, we'll consider the different denominations of coins typically used for change.
In the United States, common coin denominations are pennies (1 cent), nickels (5 cents), dimes (10 cents), and quarters (25 cents).
To be unable to give $2 (200 cents) exactly, we need to ensure we don't have combinations of coins that add up to 200 cents.
Here's a possible scenario:
The person has 3 quarters, totaling 75 cents.
Adding another quarter would make it possible to give $2, so we stop at 3 quarters.
The person has 4 dimes, totaling 40 cents.
Adding another dime would make it possible to give $2, so we stop at 4 dimes.
The person has 4 nickels, totaling 20 cents.
Adding another nickel would make it possible to give $2, so we stop at 4 nickels.
For similar question on total amount.
https://brainly.com/question/25734188
#SPJ11
Use the following data to construct a scatterplot. What type of relationship is implied?
x 3 6 10 14 18 23
y 34 28 20 12 5 0
Answers
Answer:
The relationship between x and y is a negative linear relationship
Step-by-step explanation:
To construct a scatterplot, we plot each (x,y) pair as a point in a coordinate plane. Using the given data, we get:
(x,y) = (3,34), (6,28), (10,20), (14,12), (18,5), (23,0)
We can then plot these points and connect them with a line to visualize the relationship:
35| .
| .
| .
| .
|.
0 +------------------------
0 5 10 15 20 25
x
From the scatterplot, we can see that the relationship between x and y is a negative linear relationship. As x increases, y tends to decrease.
To Know more about scatterplot refer here
https://brainly.com/question/30017616#
#SPJ11
The safe load, L, of a wooden beam supported at both ends varies jointly as the width, w, and the square of the depth, d, and inversely as the length, l. A wooden beam 9in. Wide, 8in. Deep, and 7ft long holds up 26542lb. What load would a beam 6in. Wide, 4in. Deep, and 19ft. Long, of the same material, support? Round your answer to the nearest integer if necessary.
Answers
The load that a beam 6in. Wide, 4in. Deep, and 19ft. Long, of the same material, support is 2436 lb (nearest integer).
The safe load, L, of a wooden beam supported at both ends varies jointly as the width, w, and the square of the depth, d, and inversely as the length, l.
To find:
What load would a beam 6in. Wide, 4in. Deep, and 19ft. Long, of the same material, support?
Formula used:
L = k (w d²)/ l
where k is a constant of variation.
Let k be the constant of variation.Then, the safe load L of a wooden beam can be written as:
L = k (w d²)/ l
Now, using the given values, we have:
L₁ = k (9 × 8²)/ 7 and
L₂ = k (6 × 4²)/ 19
Also, L₁ = 26542 lb (given)
Thus, k = L₁ l / w d²k = (26542 lb × 7 ft) / (9 in × 8²)k
= 1364.54 lb-ft/in²
Substituting the value of k in the equation of L₂, we get:
L₂ = 1364.54 (6 × 4²)/ 19L₂
= 2436 lb (nearest integer)
To know more about integer, visit:
https://brainly.com/question/490943
#SPJ11
Consider the following differential equation. x2y'' − 20y = 0 Find all the roots of the auxiliary equation. (Enter your answers as a comma-separated list.) Solve the given differential equation. y(x) =
Answers
Answer: The given differential equation is a second-order homogeneous differential equation with constant coefficients. The general form of the auxiliary equation for such an equation is:
ar² + br + c = 0
where a, b, and c are constants. The roots of this equation give us the characteristic roots of the differential equation, which are used to find the general solution.
For the given differential equation, the auxiliary equation is:
x^2r^2 - 20 = 0
Simplifying, we get:
r^2 = 20/x^2
Taking the square root of both sides, we get:
r = ±(2√5)/x
The roots of the auxiliary equation are therefore:
r1 = (2√5)/x
r2 = -(2√5)/x
The general solution to the differential equation is:
y(x) = c1 x^(2√5)/2 + c2 x^(-2√5)/2
where c1 and c2 are constants determined by the initial or boundary conditions.
The general solution to the differential equation is:
y(x) = c1 x^5 + c2 x^-4
The auxiliary equation corresponding to the differential equation is:
r^2x^2 - 20 = 0
Solving for r, we get:
r^2 = 20/x^2
r = +/- sqrt(20)/x
r = +/- 2sqrt(5)/x
The roots of the auxiliary equation are +/- 2sqrt(5)/x.
To solve the differential equation, we assume that the solution has the form y(x) = Ax^r, where A is a constant and r is one of the roots of the auxiliary equation.
Substituting y(x) into the differential equation, we get:
x^2 (r)(r-1)A x^(r-2) - 20Ax^r = 0
Simplifying, we get:
r(r-1) - 20 = 0
r^2 - r - 20 = 0
(r-5)(r+4) = 0
So the roots of the auxiliary equation are r = 5 and r = -4.
Thus, the general solution to the differential equation is:
y(x) = c1 x^5 + c2 x^-4
where c1 and c2 are arbitrary constants.
To know more about differential equation refer here:
https://brainly.com/question/31251286
#SPJ11
Will give brainlest and 25 points
Answers
Answer:
The angles are complementary. It is a 90° angle or a right angle.
x = 50°
Hope this helps!
Step-by-step explanation:
50° + 40° = 90°
The following is a sample of unemployment rates (in percentage points) in the US sampled from the period 1990-2004.
4.2, 4.7, 5.4, 5.8, 4.9
(a) (2 points) Compute the sample mean, x and standard deviation, s using the formula method. (Round your answers to one decimal place). [Note: You can only use the calculator method to check your answer].
Answers
Answer:
The sample mean is 5 and the sample standard deviation is 0.6, both rounded to one decimal place.
Step-by-step explanation:
To compute the sample mean using the formula method, we add up all the observations and divide by the sample size:
x = (4.2 + 4.7 + 5.4 + 5.8 + 4.9)/5
= 25/5
= 5
To compute the sample standard deviation using the formula method, we first need to compute the sample variance. The sample variance is the sum of the squared differences between each observation and the sample mean, divided by the sample size minus one:
s^2 = [(4.2 - 5)^2 + (4.7 - 5)^2 + (5.4 - 5)^2 + (5.8 - 5)^2 + (4.9 - 5)^2]/(5-1)
= [(-0.8)^2 + (-0.3)^2 + (0.4)^2 + (0.8)^2 + (-0.1)^2]/4
= (0.64 + 0.09 + 0.16 + 0.64 + 0.01)/4
= 0.35
Then, the sample standard deviation is the square root of the sample variance:
s = sqrt(0.35)
= 0.6
To Know more about sample mean refer here
https://brainly.com/question/31101410#
#SPJ11
2. how many of the 86 undergraduates gave the joke a rating of at least 10?
Answers
If we have a frequency table or a histogram of the joke ratings, we can sum up the frequencies or the counts of the rating values that are greater than or equal to 10 to obtain the total number of undergraduates who gave the joke a rating of at least 10.
Without knowing the specifics of the joke rating system or the data provided, it is impossible to determine the exact number of undergraduates who gave the joke a rating of at least 10.
However, if the data on the joke ratings are available, we can determine the number of undergraduates who gave the joke a rating of at least 10 by simply counting the number of observations that meet this criterion.
For instance, if we have a dataset containing the joke ratings of all 86 undergraduates, we can filter the dataset to only include the observations where the rating is greater than or equal to 10. The resulting dataset will contain the observations that meet this criterion, and the number of observations in this filtered dataset will represent the number of undergraduates who gave the joke a rating of at least 10.
For such more questions Histogram:
https://brainly.com/question/30672305
#SPJ11
The number of undergraduates who gave the joke a rating of at least 10 is given as follows:
73 undergraduates.
How to obtain probabilities using the normal distribution?We first must use the z-score formula, as follows:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
In which:
X is the measure.[tex]\mu[/tex] is the population mean.[tex]\sigma[/tex] is the population standard deviation.The meaning of the z-score and of p-value are given as follows:
The z-score represents how many standard deviations the measure X is above or below the mean of the distribution, and can be positive(above the mean) or negative(below the mean).The z-score table is used to obtain the p-value of the z-score, and it represents the percentile of the measure represented by X in the distribution.The mean and the standard deviation for this problem are given as follows:
[tex]\mu = 14.48, \sigma = 4.38[/tex]
The proportion of ratings that are at least 10 is one subtracted by the p-value of Z when X = 10, hence:
Z = (10 - 14.48)/4.38
Z = -1.02.
Z = -1.02 has a p-value of 0.1539.
Hence:
1 - 0.1539 = 0.8471.
The amount out of 86 undergraduates is given as follows:
0.8471 x 86 = 73 undergraduates.
Missing InformationThe missing part of the question is given by the image presented at the end of the answer.
More can be learned about the normal distribution at https://brainly.com/question/25800303
#SPJ4
Factor completely 3bx2 − 9x3 − b 3x. (b − 3x)(3x2 − 1) (b 3x)(3x2 1) (b 3x)(3x2 − 1) Prime.
Answers
The given trinomial is factored completely by finding the GCF and applying the difference of squares formula on the remaining trinomial inside the parentheses.
To factor completely 3bx² − 9x³ − b3x, you have to find the greatest common factor. In this case, the greatest common factor is 3x, so you can factor that out.
This leaves you with:3x(bx² − 3x² − b)
Next, you have to factor the trinomial in the parentheses.
This can be done using the difference of squares:bx² − 3x² − b = -b + x²(b - 3x)(x² + 1)
So the final factorization of 3bx² − 9x³ − b3x is:3x(b - 3x)(x² + 1)
In conclusion, the given trinomial is factored completely by finding the GCF and applying the difference of squares formula on the remaining trinomial inside the parentheses.
To know more about factorization visit:
brainly.com/question/14452738
#SPJ11
Suppose the graph represents the labor market. Line shows the relationship between the wage and the number of people willing to work. Lineshows the relationship between the wage and the number of people firms wish to hire. Quantity (workers) The demand curve for labor exhibits relationship between wage and quantity of workers demanded, and the supply curve of labor exhibits relationship between wage and the quantity of people willing to work.
Answers
This is a description of a graphical representation of the labor market, where a line represents the demand curve for labor, showing the relationship between the wage and the quantity of workers demanded, and another line represents the supply curve of labor, showing the relationship between the wage and the quantity of people willing to work. The point where the two lines intersect represents the equilibrium wage and quantity of labor in the market.
The graphical representation of the labor market shows two lines, one representing the demand curve for labor and the other representing the supply curve for labor. The demand curve shows the relationship between the wage offered by firms and the quantity of workers demanded. The supply curve shows the relationship between the wage offered by firms and the quantity of people willing to work. The intersection of these two curves determines the equilibrium wage and quantity of labor in the market.
To know more about graphical representation,
https://brainly.com/question/29206781
#SPJ11
Last cigarette. Here is the regression analysis of tar and nicotine content of the cigarettes in Exercise 21.
Dependent variable is: nicotine
constant = 0.154030
Tar = 0.065052
a) Write the equation of the regression line.
b) Estimate the Nicotine content of cigarettes with 4 milligrams of Tar.
c) Interpret the meaning of the slope of the regression line in this context.
d) What does the y-intercept mean?
e) If a new brand of cigarette contains 7 milligrams of tar and a nicotine level whose residual is -0.5 mg, what is the nicotine content?
Answers
The solution to all parts is shown below.
a) The equation of the regression line is:
Nicotine = 0.154030 + 0.065052 x Tar
b) To estimate the nicotine content of cigarettes with 4 milligrams of tar, substitute Tar = 4 in the regression equation:
Nicotine = 0.154030 + 0.065052 x 4
= 0.407238
Therefore, the estimated nicotine content of cigarettes with 4 milligrams of tar is 0.407238 milligrams.
c) The slope of the regression line (0.065052) represents the increase in nicotine content for each unit increase in tar content.
In other words, on average, for each additional milligram of tar in a cigarette, the nicotine content increases by 0.065052 milligrams.
d) The y-intercept of the regression line (0.154030) represents the estimated nicotine content when the tar content is zero. However, this value is not practically meaningful because there are no cigarettes with zero tar content.
e) To find the nicotine content of the new brand of cigarette with 7 milligrams of tar and a residual of -0.5 milligrams, first calculate the predicted nicotine content using the regression equation:
Nicotine = 0.154030 + 0.065052 x 7
= 0.649446
The residual is the difference between the observed nicotine content and the predicted nicotine content:
Residual = Observed Nicotine - Predicted Nicotine
-0.5 = Observed Nicotine - 0.649446
Observed Nicotine = -0.5 + 0.649446 = 0.149446
Therefore, the estimated nicotine content of the new brand of cigarette with 7 milligrams of tar and a residual of -0.5 milligrams is 0.149446 milligrams.
Learn more about Residual here:
https://brainly.com/question/28331795
#SPJ1
If a rectangle has an area of 4b - 10 and a length of 2 what is an expression to represent the width
Answers
The expression to represent the width of the rectangle is given by, x = ±√(2b - 5). Note: Here, we have taken the positive value of the square root because the width of a rectangle cannot be negative.
Thus, the expression for the width of the rectangle is given as x = √(2b - 5).
Given that a rectangle has an area of 4b-10 and a length of 2, we need to find the expression to represent the width of the rectangle.
Area of the rectangle is given by:
Area of rectangle
= Length × Width
From the given information, we have, Length of the rectangle = 2Area of the rectangle
= 4b - 10Let the width of the rectangle be x.
Therefore, we can write the equation for the area of the rectangle as:4b - 10 = 2x × xOr,4b - 10
= 2x²On solving the above equation,
we get:2x²
= 4b - 10x²
= (4b - 10)/2x²
= 2b - 5x
= ±√(2b - 5).
Therefore, the expression to represent the width of the rectangle is given by, x = ±√(2b - 5).
Here, we have taken the positive value of the square root because the width of a rectangle cannot be negative.
Thus, the expression for the width of the rectangle is given as x = √(2b - 5).
To know more about Rectangle visit :
https://brainly.com/question/15019502
#SPJ11
The length of a rectangle has increased in the ratio 3:2 and the width reduced in the ratio 4:5. If the original length and width were 18cm and 15cm respectively. Find the ratio of change in its area
Answers
The ratio of change in the area of a rectangle, given that the length has increased in the ratio 3:2 and the width has reduced in the ratio 4:5 and the ratio of change in the area of the rectangle is 1.2, indicating a 20% increase in the area from the original size.
Let's calculate the new length and width of the rectangle. The original length is 18 cm, and it has increased in the ratio 3:2. So, the new length can be calculated as (18 cm) * (3/2) = 27 cm. Similarly, the original width is 15 cm, and it has reduced in the ratio 4:5. Hence, the new width can be calculated as (15 cm) * (4/5) = 12 cm.
The original area of the rectangle is (18 cm) * (15 cm) = 270 cm². The new area is (27 cm) * (12 cm) = 324 cm². Therefore, the ratio of change in the area can be calculated as (324 cm²) / (270 cm²) = 1.2.
Hence, the ratio of change in the area of the rectangle is 1.2, indicating a 20% increase in the area from the original size.
Learn more about ratio here:
https://brainly.com/question/13419413
#SPJ11
A real estate analyst estimates the following regression, relating a house price to its square footage (Sqft):PriceˆPrice^ = 48.21 + 52.11Sqft; SSE = 56,590; n = 50In an attempt to improve the results, he adds two more explanatory variables: the number of bedrooms (Beds) and the number of bathrooms (Baths). The estimated regression equation isPriceˆPrice^ = 28.78 + 40.26Sqft + 10.70Beds + 16.54Baths; SSE = 48,417; n = 50
Answers
The SSE for the first regression equation is 56,590 and for the second regression equation is 48,417.
The first estimated regression equation is:
Priceˆ = 48.21 + 52.11Sqft
where Price^ is the predicted house price based on the square footage, and Sqft is the square footage.
The second estimated regression equation, with the added variables, is:
Priceˆ = 28.78 + 40.26Sqft + 10.70Beds + 16.54Baths
where Beds is the number of bedrooms and Baths is the number of bathrooms.
The SSE (sum of squared errors) measures the difference between the actual house prices and the predicted house prices based on the regression equation.
The SSE for the first regression equation is 56,590 and for the second regression equation is 48,417.
A smaller SSE indicates that the regression equation is a better fit for the data. In this case, the second regression equation with the added variables has a smaller SSE, which means it is a better fit for the data compared to the first regression equation.
for such more question on regression equation
https://brainly.com/question/22077082
#SPJ11
The real estate analyst initially estimated a regression equation relating house price to its square footage with an function of 48.21 and a coefficient of 52.11 for square footage. The sum of squared errors (SSE) was 56,590 and the sample size was 50.
The real estate analyst initially estimated a regression equation relating house price to its square footage (Sqft) as:
Price^ = 48.21 + 52.11Sqft
Here, SSE (sum of squared errors) is 56,590, and the number of observations (n) is 50.
To improve the results, the analyst adds two more explanatory variables: the number of bedrooms (Beds) and the number of bathrooms (Baths). The new estimated regression equation becomes:
Price^ = 28.78 + 40.26Sqft + 10.70Beds + 16.54Baths
In this case, the SSE is reduced to 48,417, with the same number of observations (n) equal to 50. The reduced SSE indicates that the new equation with additional explanatory variables (Beds and Baths) has improved the model's accuracy in predicting house prices.
To learn more about regression : brainly.com/question/31735997
#SPJ11
Find the value(s) of a making v= 6a i – 3j parallel to w*= ał i +6j. a = ((3)^(1/3) (If there is more than one value of a, enter the values as a comma-separated list.)
Answers
Hence, the value(s) of a that make v parallel to w* are a = 2ł√3 or a = -2ł√3. Note that for these values of a, the unit vectors u and u* are equal, which means that v and w* are parallel.
To make vector v parallel to vector w*, we need to find a scalar multiple of w* that has the same direction as v.
The direction of v is given by its unit vector, which is:
u = v/|v| = (6a i - 3j) / |6a i - 3j| = (6a i - 3j) / √[(6a)^2 + (-3)^2]
The direction of w* is given by its unit vector, which is:
u* = w*/|w*| = (ał i + 6j) / |ał i + 6j| = (ał i + 6j) / √[(ał)^2 + 6^2]
For v to be parallel to w*, the unit vectors u and u* must be equal, which means their components must be proportional. Therefore, we can write:
6a / √[(6a)^2 + (-3)^2] = ał / √[(ał)^2 + 6^2] = k, where k is the proportionality constant.
Squaring both sides of this equation, we get:
(6a)^2 / [(6a)^2 + 9] = (ał)^2 / [(ał)^2 + 36] = k^2
Simplifying and solving for a, we get:
(36a^2) / [(36a^2) + 9] = (a^2ł^2) / [(a^2ł^2) + 36^2]
Multiplying both sides by [(36a^2) + 9] [(a^2ł^2) + 36^2], we get:
36a^2 (a^2ł^2 + 36^2) = (36a^2 + 9) a^2ł^2
Simplifying and rearranging, we get:
3a^2ł^2 - 36a^2 = 0
Factorizing and solving for a, we get:
a^2 (3ł^2 - 36) = 0
Therefore, a = 0 or a = ±6ł/√3 = ±2ł√3.
Since a cannot be zero (otherwise, v would be the zero vector), the only possible values for a are a = 2ł√3 or a = -2ł√3.
To know more about vectors,
https://brainly.com/question/29740341
#SPJ11
The length of a radius of a circle, measured in feet, is represented by the expression z + 3. 6. The diameter of the circle is 1145 ft.
What is the value of z?
Enter your answer as a decimal or mixed number in the simplest form in the box.
z =
Answers
The diameter of a circle is twice the length of its radius. In this case, the diameter is given as 1145 ft. We can set up the equation:
2(radius) = diameter
2(z + 3.6) = 1145
Simplifying the equation:
2z + 7.2 = 1145
Subtracting 7.2 from both sides:
2z = 1137.8
Dividing both sides by 2:
z = 568.9
Therefore, the value of z is 568.9.
Learn more about circle here:
https://brainly.com/question/24375372
#SPJ11
find the pmf of (y1|u = u), where u is a nonnegative integer. identify your answer as a named distribution and specify the value(s) of its parameter(s)
Answers
To find the pmf of (y1|u = u), where u is a nonnegative integer, we need to use the Poisson distribution. The Poisson distribution describes the probability of a given number of events occurring in a fixed interval of time or space, given that these events occur independently and at a constant average rate. The pmf of (y1|u = u) can be expressed as: P(y1=k|u=u) = (e^-u * u^k) / k! where k is the number of events that occur in the fixed interval, u is the average rate at which events occur, e is Euler's number (approximately equal to 2.71828), and k! is the factorial of k. Therefore, the named distribution for the pmf of (y1|u = u) is the Poisson distribution, with parameter u representing the average rate of events occurring in the fixed interval.
About Poisson DistributionIn probability theory and statistics, the Poisson distribution is a discrete probability distribution that expresses the probability of the number of events occurring in a given time period if the average of these events is known and in independent time since the last event.
Learn more about poisson distribution at https://brainly.com/question/30388228
#SPJ11
Evaluate the expression under the given conditions. sin(theta + phi); sin(theta) = 12 / 13, theta in Quadrant I, cos (phi) = - square root 5 / 5, phi in Quadrant II
Answers
The correct value will be : (-12sqrt(325) + 30sqrt(130))/65
We can use the sum formula for sine:
sin(theta + phi) = sin(theta)cos(phi) + cos(theta)sin(phi)
Given that theta is in Quadrant I, we know that sin(theta) is positive. Using the Pythagorean identity, we can find that cos(theta) is:
cos(theta) = [tex]sqrt(1 - sin^2(theta)) = sqrt(1 - (12/13)^2)[/tex] = 5/13
Similarly, since phi is in Quadrant II, we know that sin(phi) is positive and cos(phi) is negative. Using the Pythagorean identity, we can find that:
sin(phi) = [tex]sqrt(1 - cos^2(phi))[/tex]
= [tex]sqrt(1 - (-sqrt(5)/5)^2)[/tex]
= sqrt(24)/5
cos(phi) = -sqrt(5)/5
Now we can substitute these values into the sum formula for sine:
sin(theta + phi) = sin(theta)cos(phi) + cos(theta)sin(phi)
= (12/13)(-sqrt(5)/5) + (5/13)(sqrt(24)/5)
= (-12sqrt(5) + 5sqrt(24))/65
We can simplify the answer further by rationalizing the denominator:
sin(theta + phi) = [tex][(-12sqrt(5) + 5sqrt(24))/65] * [sqrt(65)/sqrt(65)][/tex]
= (-12sqrt(325) + 30sqrt(130))/65
To know more about quadrants refer here:
https://brainly.com/question/29296837?#
#SPJ11
find the exact location of all the relative and absolute extrema of the function. (order your answers from smallest to largest t.) f(t) = 3(t^2+1 / t^2−1) ; −2 ≤ t ≤ 2, t ≠ ±1f has ____ at (t,y)=( ____ )f has ____ at (t,y)=( ____ )f has ____ at (t,y)=( ____ )
Answers
Answer:
f has a local maximum at (t,y)=(-√3, -3/2)
f has a local maximum at (t,y)=(1, ∞)
f has no local or absolute minima.
Step-by-step explanation:
To find the relative and absolute extrema of the function f(t) = 3(t^2+1 / t^2−1), we need to find the critical points and endpoints of the interval [-2, 2] where the function is defined and differentiable. The derivative of f(t) is given by:
f'(t) = 6t(t^2-3) / (t^2-1)^2
The critical points occur where f'(t) = 0 or is undefined. Thus, we need to solve the equation:
6t(t^2-3) / (t^2-1)^2 = 0
This equation is satisfied when t = 0 or t = ±√3. However, we need to check the sign of f'(t) on each interval separated by these critical points to determine whether they correspond to local maxima, local minima, or inflection points.
On the interval (-2, -√3), f'(t) is negative, indicating that f(t) is decreasing. Therefore, the function has a local maximum at t = -√3.
On the interval (-√3, 0), f'(t) is positive, indicating that f(t) is increasing. Therefore, the function has no local extrema on this interval.
On the interval (0, √3), f'(t) is negative, indicating that f(t) is decreasing. Therefore, the function has no local extrema on this interval.
On the interval (√3, 1), f'(t) is positive, indicating that f(t) is increasing. Therefore, the function has no local extrema on this interval.
On the interval (1, 2), f'(t) is negative, indicating that f(t) is decreasing. Therefore, the function has a local maximum at t = 1.
Finally, we need to check the endpoints of the interval [-2, 2]. Since the function is not defined at t = ±1, we need to consider the limits as t approaches these values. We have:
lim f(t) = -∞ as t approaches -1 from the left
lim f(t) = ∞ as t approaches -1 from the right
lim f(t) = ∞ as t approaches 1 from the left
lim f(t) = -∞ as t approaches 1 from the right
Therefore, the function has no absolute extrema on the interval [-2, 2].
In summary, the function has a local maximum at t = -√3 and a local maximum at t = 1, and no absolute extrema on the interval [-2, 2]. The values of these extrema are:
f(-√3) = 3(-2/4) = -3/2
f(1) = 3(2/0) = ∞
Thus, the answer is:
f has a local maximum at (t,y)=(-√3, -3/2)
f has a local maximum at (t,y)=(1, ∞)
f has no local or absolute minima.
To know more about relative and absolute extrema refer here
https://brainly.com/question/2272467#
#SPJ11