please help with question #2

The ΔH for the reaction C₂H₄(g) + H₂(g) → C₂H₆(g) is -137 kJ/mol.

The desired reaction is:

C₂H₄(g) + H₂(g) → C₂H₆(g)

We can use the given equations to obtain the ΔH for this reaction as follows:

C₂H₄(g) + 3 O₂(g) → 2 CO₂(g) + 2 H₂O(l) ΔH1 = -1411 kJ/mol

H2(g) + 1/2 O₂(g) → H₂O(l) ΔH2 = -285.8 kJ/mol

C₂H₆((g) + 3 1/2 O₂(g) → 2 CO₂(g) + 3 H₂O(l) ΔH3 = -1560 kJ/mol

We need to manipulate these equations to obtain the desired reaction:

C₂H₄(g) + H2(g) → C₂H₆(g)

For this, we can use the following manipulations:

1. Multiply equation 2 by 3 and reverse it to get H2(g) → 1/2 O₂(g) + H₂O(l) with ΔH = +857.4 kJ/mol.

2. Add equation 1 and equation 3 after multiplying equation 1 by 2, so that the CO₂ and H₂O terms cancel out, leaving the desired reaction with ΔH = -137 kJ/mol:

2 C₂H₄(g) + 7 O₂(g) → 4 CO₂(g) + 4 H₂O(l) ΔH1' = -2822 kJ/mol

H2(g) → 1/2 O₂(g) + H₂O(l) ΔH2' = +857.4 kJ/mol (reversed and multiplied by 3)

2 C₂H₆(g) + 7 O₂(g) → 4 CO₂(g) + 6 H₂O(l) ΔH3' = -2340 kJ/mol (reversed and multiplied by 2)

2 C₂H₄(g) + 2 H2(g) + 9 O₂(g) → 2 C₂H₆(g) + 7 O₂(g) + 4 H₂O(l) ΔH = -137 kJ/mol

Therefore, the ΔH for the reaction C₂H₄(g) + H2(g) → C₂H₆(g) is -137 kJ/mol.

To know more about ΔH follow the link:

https://brainly.com/question/4253277

#SPJ4

The Lewis acid-base definition involves the classification of some substances as acids or bases that the other two definitions (Arrhenius and Bronsted-Lowry) miss.

This is because the Lewis definition focuses on the interaction between electron pairs, allowing for the identification of substances as Lewis acids (electron-pair acceptors) or Lewis bases (electron-pair donors) that may not exhibit typical acid or base behavior according to the Arrhenius or Bronsted-Lowry definitions.

1. Arrhenius Definition: An acid is a substance that increases the concentration of H+ ions when dissolved in water, while a base is a substance that increases the concentration of OH- ions.

2. Brønsted-Lowry Definition: An acid is a proton (H+) donor, and a base is a proton (H+) acceptor.

3. Lewis Definition: An acid is an electron-pair acceptor, and a base is an electron-pair donor.

The Lewis definition is broader than the Arrhenius and Brønsted-Lowry definitions because it includes substances that don't necessarily involve H+ ions. Thus, it classifies some substances as acids or bases that the other two definitions miss.

learn more about Lewis acid-base here

https://brainly.com/question/28299444

#SPJ11

A plausible solution to human activities contributing to increasing amounts of carbon dioxide in the atmosphere would be to implement a combination of solutions that target various sectors of society. Option A, using alternative energies for the production of electricity, is a good start.

It reduces the amount of carbon emissions from power plants. However, it does not solve the issue of carbon emissions from transportation, which is a significant contributor to the problem.

Option B, requiring all new automobiles to run on electricity, is also a good solution. It will significantly reduce carbon emissions from transportation, which is a significant contributor to the problem. However, it does not solve the issue of carbon emissions from existing vehicles.

Option C, planting more trees and decreasing deforestation practices, is a great solution. Trees absorb carbon dioxide from the atmosphere, which reduces the amount of greenhouse gases in the air. However, it is a long-term solution that requires consistent efforts over time.

Option D, requiring everybody to use mass transportation or methods of transportation that do not require burning fossil fuels, such as riding bicycles, is also a great solution. It reduces carbon emissions from transportation and encourages people to adopt a healthier lifestyle. However, it may not be feasible for everyone, especially those who live in rural areas with limited transportation options.

Therefore, a combination of solutions is necessary to reduce carbon emissions and combat climate change. These solutions should include alternative energy sources, electric vehicles, reforestation efforts, and incentives for individuals to use low-carbon transportation options.

To know more about Carbon dioxide visit :

https://brainly.com/question/3049557

#SPJ11

In the given equation, H₂O acts as a Bronsted-Lowry acid as it donates a proton and NH₂ - acts as a Bronsted-Lowry base as it accepts a proton.

In the provided equation, H₂O donates a proton (H+) to NH₂ -, making

H₂O the Bronsted-Lowry acid. NH₂ - accepts the proton, making it the Brønsted-Lowry base.

The resulting products are NH₃, which is formed after accepting the proton from H₂O, and OH-, which is formed after H₂O donates its proton. Bronsted-Lowry theory defines acids as species capable of donating protons and bases as species capable of accepting protons.

By identifying the species involved in proton transfer, we can determine the Brønsted-Lowry acids (donors) and bases (acceptors) in the given equation.

Learn more about Bronsted-Lowry acid

brainly.com/question/29317749

#SPJ11

The volume of the NO₂Cl will be produced from the 3.3 L of the Cl₂ , is the 6.6 L.

The balanced chemical equation is as :

2NO₂(g) + Cl₂(g) ==> 2NO₂Cl(g)

The volume of the Cl₂ = 3.3 L

The moles of substance = mass / molar mass

1  mole of the Cl₂ produces the 2 mole of the NO₂Cl and the NO₂ is present in the excess amount.

The moles of the NO₂Cl = 2 × 3.3 mol

The moles of the NO₂Cl = 6.6 mol

At the constant pressure and the constant temperature the number of moles is directly proportional to volume.

The volume of the NO₂Cl = 6.6 L.

To learn more about volume here

https://brainly.com/question/20727955

#SPJ4

The value of kb for the cyanide anion, CN^- can be calculated using the relationship: kb = kw/ka, where kw is the ion product constant for water, which is 1.0 x 10^-14 at 25°C.

Given that ka for HCN is 6 x 10^-10, we can first find the equilibrium constant for the dissociation of HCN into H+ and CN^-:

ka = [H+][CN^-]/[HCN]

At equilibrium, the concentration of CN^- is equal to the concentration of H+ since HCN is a weak acid. Thus, we can simplify the expression to:

ka = [CN^-]^2/[HCN]

Solving for [CN^-], we get:

[CN^-] = sqrt(ka*[HCN])

Substituting the given value of ka and assuming that the concentration of HCN is equal to the initial concentration (since it is a weak acid and does not fully dissociate), we get:

[CN^-] = sqrt(6 x 10^-10 * [HCN])

Now, we can use the relationship between kb and ka to find the value of kb:

kb = kw/ka = 1.0 x 10^-14/6 x 10^-10 = 1.67 x 10^-5

Therefore, the value of kb for the cyanide anion, CN^- is 1.67 x 10^-5.

To find the value of Kb for the cyanide anion (CN^-), we need to use the Ka for HCN and the Kw (ion product of water) constant. The given Ka for HCN is 6×10^-10.

Step 1: Write the relationship between Ka, Kb, and Kw:
Ka × Kb = Kw

Step 2: Insert the given values and solve for Kb:
Kw = 1×10^-14 (at 25°C)
Ka = 6×10^-10
Kb =?

(6×10^-10) × Kb = 1×10^-14

Step 3: Solve for Kb:
Kb = (1×10^-14) / (6×10^-10)

Kb = 1.67×10^-5

The value of Kb for the cyanide anion (CN^-) is 1.67×10^-5.

To know about Cyanide visit:

https://brainly.com/question/13030946

#SPJ11

The statement that is not true of primary batteries is:

The size of the battery has no influence on the voltage delivered.

This statement is false because the voltage delivered by a primary battery is directly proportional to its size. The larger the battery, the greater the number of electrochemical cells it contains, and the greater the voltage it can deliver.

For example, a typical AA alkaline battery has a voltage of 1.5 volts, while a D alkaline battery has a voltage of 1.5 x 2 = 3 volts, because it contains two AA cells. Similarly, a 9-volt battery contains six smaller cells that are connected in series to deliver a total voltage of 9 volts.

The other statements are true of primary batteries. The size of the battery does affect the number of moles of electrons delivered at a given time (statement 1), and alkaline batteries can deliver more energy than zinc-carbon dry cells of similar size (statement 3).

Specifically, alkaline batteries can deliver about three to five times the energy of a zinc-carbon dry cell of similar size, not thirty to fifty times as stated in statement 3.

For more question on batteries click on

https://brainly.com/question/26466203

#SPJ11

There are three sets of hydrogens in 2,2-dimethyl pentane, with a total of 12 hydrogens.

The molecular formula of 2,2-dimethyl pentane is C7H16. The structure of the molecule consists of a chain of five carbon atoms, with two methyl groups (CH3) attached to the second carbon atom. Since the two methyl groups are identical, the hydrogens attached to them are also identical and form one set. Thus, there are two hydrogens in this set.

The remaining five carbon atoms in the chain have a total of 10 hydrogens. However, these hydrogens are not all the same. Some of them are attached to primary carbon atoms (carbon atoms that are directly attached to only one other carbon atom), while others are attached to secondary carbon atoms (carbon atoms that are directly attached to two other carbon atoms).

The hydrogens attached to primary carbon atoms form one set, while those attached to secondary carbon atoms form another set. Therefore, there are two sets of hydrogens in the chain, each with five hydrogens.

For more such questions on hydrogens:

https://brainly.com/question/31018544

#SPJ11

There are three different types (sets) of hydrogens in 2,2-dimethylpentane: 6 primary hydrogens (H-C-C), 2 secondary hydrogens (H-C-C-C), and 6 tertiary hydrogens (H-C-C(C)(C)).

The number of different types (sets) of hydrogens in a molecule is determined by the number and types of carbon atoms to which the hydrogens are attached. In 2,2-dim ethyl pentane, there are five carbon atoms, each with a different number of attached hydrogen atoms. The central carbon atom has two methyl groups attached to it, making it a tertiary carbon atom and giving it six tertiary hydrogens. The two carbon atoms next to it each have one methyl group attached to them, making them secondary carbon atoms and giving them two secondary hydrogens each. The two end carbon atoms have no methyl groups attached to them, making them primary carbon atoms and giving them three primary hydrogens each. Therefore, there are three different types (sets) of hydrogens in 2,2-dimethylpentane.

Learn more about - dim ethyl pentane  here;

https://brainly.com/question/13887419

#SPJ11

There is 0.46 oz in 13g

To find out how many ounces there are in 13 grams, first, we need to convert grams to pounds and then pounds to ounces. Here are the steps:

1. Convert grams to pounds: Since there are 2.2 lbs per 1 kg, and 1 kg equals 1000 grams, we first need to convert 13 grams to kg and then to lbs.

  13 g * (1 kg / 1000 g) * (2.2 lbs / 1 kg) = 0.0286 lbs

2. Convert pounds to ounces: Now that we have the weight in pounds, we can convert it to ounces using the conversion factor of 16 ounces per 1 pound.

  0.0286 lbs * (16 oz / 1 lb) = 0.4576 oz

3. Round to 2 significant figures: Finally, we round the result to 2 significant figures.

  0.4576 oz ≈ 0.46 oz

Therefore, there is 0.46 oz in 13g.

Learn more about numerical value here,

https://brainly.com/question/31613508

#SPJ11

The molar solubility of PBI2 can be calculated using the concentration of iodide ions in a saturated solution of PBI2. Since PBI2 dissociates in water to form lead ions (Pb2+) and iodide ions (I-), we can write the dissolution equation as follows:

PbI2 (s) ⇌ Pb2+ (aq) + 2I- (aq)

The solubility product expression for PBI2 can be written as:

Ksp = [Pb2+][I-]^2

Since the solution is saturated, the concentrations of Pb2+ and I- ions are in equilibrium with the solid PBI2. Therefore, we can assume that the concentration of Pb2+ ions is negligible and that the concentration of I- ions is equal to the concentration of iodide ions in the saturated solution, which is 3.0 × 10-3 mol/L.

Substituting these values into the solubility product expression:

Ksp = (3.0 × 10-3 mol/L)^2 = 9.0 × 10-9

Solving for the molar solubility of PBI2:

Ksp = [Pb2+][I-]^2 = (x)(3.0 × 10-3 mol/L)^2

x = Ksp / [I-]^2 = 9.0 × 10-9 / (3.0 × 10-3 mol/L)^2 = 3.0 × 10-6 mol/L

Therefore, the molar solubility of PBI2 is 3.0 × 10-6 mol/L.

learn more about iodine

https://brainly.in/question/17305038?referrer=searchResults

#SPJ11

Beryllium (Be2+) is the alkaline earth metal ion most likely to undergo hydrolysis.

Hydrolysis is a chemical reaction in which a compound reacts with water to form new compounds. Among the alkaline earth metals, the ion that is most likely to undergo hydrolysis is beryllium (Be2+). Beryllium is the lightest alkaline earth metal and has a small ionic radius. Due to its small size, the electron cloud around the beryllium ion is more polarize, meaning it can be easily distorted by external charges.

When beryllium ions come into contact with water molecules, the polarized water molecules can effectively solvable the ions. This salvation process can lead to hydrolysis, where the water molecules break apart the beryllium ions, resulting in the formation of beryllium hydroxide (Be(OH)2) and hydrogen gas (H2). The hydrolysis of beryllium ions is relatively more significant compared to other alkaline earth metals due to the smaller size and higher charge density of beryllium ions.

It's important to note that while beryllium is more prone to hydrolysis among the alkaline earth metals, the reactivity of beryllium with water is still lower compared to alkali metals like sodium or potassium. The hydrolysis of beryllium is a slow process and requires a significant amount of water or an acidic environment to occur at a noticeable rate.

Learn more about alkaline earth metals

brainly.com/question/1675378

#SPJ11

Degenerate orbitals have the following characteristics: Degenerate orbitals have the same energy.

So, the correct answer is D.

Degenerate orbitals are orbitals that have the same energy level. This means that electrons in these orbitals have the same potential energy.

Characteristics of degenerate orbitals include having the same energy, and they are all identical in shape and size.

Additionally, degenerate orbitals have different values of the magnetic quantum number, m, but they share the same principal quantum number and azimuthal quantum number.

However, degenerate orbitals do not always have the same number of electrons in them, as this depends on the specific configuration of the atom.

Finally, it is important to note that degenerate orbitals only exist within the same subshell, and not across different subshells. It is also incorrect to say that degenerate orbitals are immoral and corrupt.

Hence, the correct answer is D.

Learn more about orbital at

https://brainly.com/question/18914648

#SPJ11

(S),(R)-stilbene dibromide and (R),(S)-stilbene dibromide are related to each other as stereoisomers.

Stereoisomers are compounds that have the same molecular formula and sequence of bonded atoms but differ in the spatial orientation of their atoms. In this case, both compounds have the same molecular formula, C14H12Br2, but they have different configurations at the chiral centers.

The (S),(R)-stilbene dibromide and (R),(S)-stilbene dibromide are specifically enantiomers, a type of stereoisomer. Enantiomers are non-superimposable mirror images of one another, like left and right hands. The different spatial arrangement of atoms in enantiomers can significantly affect their chemical properties and biological activities.

The notation (S) and (R) indicate the absolute configuration of the chiral centers in the molecule. The (S) or (R) designation is determined by the Cahn-Ingold-Prelog priority rules. In (S),(R)-stilbene dibromide, the first chiral center has the (S) configuration and the second chiral center has the (R) configuration, while in (R),(S)-stilbene dibromide, the first chiral center has the (R) configuration and the second chiral center has the (S) configuration. This difference in configuration leads to their distinct stereochemical properties.

Learn more about Stereoisomers here: https://brainly.com/question/30483059

#SPJ11

The final pH will be slightly lower than the initial pH of the buffer due to the addition of the HBr. The pH of the resulting solution is 8.25.

The addition of the HBr to the buffer solution will result in the formation of a new weak acid, HCN, and its conjugate base, CN⁻. The addition of HBr will cause a shift in the equilibrium of the HCN dissociation reaction. We can use the Henderson-Hasselbalch equation to calculate the pH of the resulting buffer solution:

pH = pKa + log([CN⁻]/[HCN])

where pKa is the dissociation constant of HCN, and [CN⁻] and [HCN] are the concentrations of CN⁻ and HCN in the buffer solution, respectively.

Substituting the values, we get:

pH = 9.21 +㏒([0.35 - 0.25]/[0.68 + 0.25])

pH = 9.21 + ㏒(0.1/0.93)

pH = 9.21 - 0.96

pH = 8.25

Therefore, the pH of the resulting solution is 8.25.

To know more about the Buffer solution, here

https://brainly.com/question/31426525

#SPJ4

The pH of the solution is 2.75.

The reaction between HCl and H2PO4- is:

HCl + H2PO4- → H3PO4 + Cl-

Initially, we have:

[H2PO4-] = 0.50 M

[HCl] = 0.10 M

Assuming complete reaction, the final concentration of H2PO4- and HCl would be:

[H2PO4-] = 0.50 - x

[HCl] = 0.10 - x

where x is the amount of H+ and Cl- produced.

Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution:

pH = pKa + log([HPO4 2-]/[H2PO4-])

At the equivalence point, [HPO4 2-] = [H2PO4-], so:

pH = pKa + log(1) = pKa = 2.148

However, we need to consider the initial concentrations of H2PO4- and HCl. At the start of the reaction,

[H2PO4-]/[HPO4 2-] = 10^(pKa-pH), so:

0.50/(10^(2.148-2.8)) = [H2PO4-]/[HPO4 2-]

[H2PO4-] = 0.0486 M

[HPO4 2-] = 0.451 M

The concentration of H+ is equal to the concentration of Cl-, which is x. Therefore:

x = [H+] = [Cl-] = 0.10 - x

x = [H+] = [Cl-] = 0.05 M

Substituting the concentrations into the Henderson-Hasselbalch equation:

pH = 2.148 + log(0.451/0.0486) = 2.75

For more such questions on Henderson-Hasselbalch equation

https://brainly.com/question/13423434

#SPJ11

The pH of the solution is 2.75.The reaction between HCl and H2PO4- is:HCl + H2PO4- → H3PO4 + Cl-Initially, we have:[H2PO4-] = 0.50 M[HCl] = 0.10 MAssuming complete reaction,

the final concentration of H2PO4- and HCl would be:[H2PO4-] = 0.50 - x[HCl] = 0.10 - xwhere x is the amount of H+ and Cl- produced.Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution:pH = pKa + log([HPO4 2-]/[H2PO4-])At the equivalence point, [HPO4 2-] = [H2PO4-], so:pH = pKa + log(1) = pKa = 2.148However, we need to consider the initial concentrations of H2PO4- and HCl. At the start of the reaction,[H2PO4-]/[HPO4 2-] = 10^(pKa-pH), so:0.50/(10^(2.148-2.8)) = [H2PO4-]/[HPO4 2-][H2PO4-] = 0.0486 M[HPO4 2-] = 0.451 MThe concentration of H+ is equal to the concentration of Cl-, which is x. Therefore:x = [H+] = [Cl-] = 0.10 - xx = [H+] = [Cl-] = 0.05 MSubstituting the concentrations into the Henderson-Hasselbalch equation:pH = 2.148 + log(0.451/0.0486) = 2.75

Learn more about Hasselbalch here:

brainly.com/question/13423434

#SPJ11

Without access to such data, it is not possible to agree or disagree with the student's claim regarding zeroth-order kinetics.

However, in general, if the reaction rate is independent of the concentration of the reactant(s) and only depends on the concentration of the catalyst, then the reaction is said to have zeroth-order kinetics with respect to the reactant(s) and first-order kinetics with respect to the catalyst. If the data shows a constant rate of reaction despite changes in the concentration of the reactants, then the student's claim that the reaction has zeroth-order kinetics may be valid. However, without the specific data and context, it is not possible to give a definitive.

Learn more about reaction being studied here;

https://brainly.com/question/29764065

#SPJ11

To determine the number of grams of KHP (potassium hydrogen phthalate, C8H5KO4) needed to react with 38.56 mL of a 0.2500 M sodium hydroxide (NaOH) solution,

We can use stoichiometry and the balanced chemical equation between KHP and NaOH. The balanced equation is:

KHP + NaOH → KNaC8H4O4 + H2O

From the balanced equation, we can see that the stoichiometric ratio between KHP and NaOH is 1:1. This means that one mole of KHP reacts with one mole of NaOH.

First, we need to calculate the number of moles of NaOH:

Volume of NaOH solution = 38.56 mL = 0.03856 L (converted to liters)

Molarity of NaOH solution = 0.2500 M

Number of moles of NaOH = Volume × Molarity = 0.03856 L × 0.2500 mol/L = 0.00964 mol

Since the stoichiometric ratio between KHP and NaOH is 1:1, the number of moles of KHP needed is also 0.00964 mol.

To calculate the mass of KHP, we need to know the molar mass of KHP, which is 204.23 g/mol.

Mass of KHP = Number of moles × Molar mass = 0.00964 mol × 204.23 g/mol = 1.969 g. Therefore, approximately 1.969 grams of KHP are needed to react with 38.56 mL of a 0.2500 M NaOH solution.

Learn more about grams of KHP here

https://brainly.com/question/30921023

#SPJ11

Nicotine, coniine, quinine, atropine, and morphine are all examples of Alkaloids. Option A is correct.

Alkaloids are a group of naturally occurring compounds that contain nitrogen atoms and have pharmacological effects on humans and other animals.

They are typically bitter-tasting and often have powerful physiological effects. Examples of alkaloids include nicotine, which is found in tobacco plants, coniine, which is found in hemlock, quinine, which is used to treat malaria, atropine, which is used to dilate pupils and treat certain heart conditions, and morphine, which is a pain-relieving opioid.

Alkaloids have a wide range of biological activities and are used in medicine, agriculture, and other industries. The term "alkaloid" comes from the word "alkali" and was originally used to describe compounds that have a basic pH.

However, not all alkaloids are basic, and the term now refers more generally to compounds that have a nitrogen-containing ring structure and pharmacological activity.Therefore, the correct option is A.

The complete question is:

Nicotine, coniine, quinine, atropine, and morphine are all examples of A) alkaloids: B) carboxylic acids amides D) ethers_ E) esters.

To know more about Alkaloids, refer here:

https://brainly.com/question/15265691#

#SPJ11

An ionotropic cholinergic receptor produces a postsynaptic potential that is typically excitatory

Ionotropic cholinergic receptors, also known as nicotinic acetylcholine receptors (nAChRs), are ligand-gated ion channels found at synapses in the nervous system

They play a crucial role in transmitting signals between neurons and muscles.

When a neurotransmitter, like acetylcholine, binds to the receptor, it causes the ion channel to open, allowing ions to flow across the membrane.

This produces a postsynaptic potential, which is a temporary change in the electrical potential of the postsynaptic neuron.

The specific type of postsynaptic potential generated by ionotropic cholinergic receptors is an excitatory postsynaptic potential (EPSP)

Learn more about neurotransmitters at

https://brainly.com/question/31116024

#SPJ11

The number of grams of W formed when 3.20 x 10^22 molecules of WO3 react with excess H2 is 97.63 grams.

To find the number of grams of W formed, we need to follow these steps:

1. Determine the molar mass of WO3:

  - The molar mass of W is 183.84 g/mol.

  - The molar mass of O is 16.00 g/mol.

  - Since WO3 has three oxygen atoms, its molar mass is 183.84 + (3 * 16.00) = 231.84 g/mol.

2. Convert the number of molecules of WO3 to moles:

  - Divide the given number of molecules (3.20 x 10^22) by Avogadro's number (6.022 x 10^23) to get the number of moles.

3. Use the balanced chemical equation to determine the molar ratio between WO3 and W:

  - From the balanced equation, we know that 2 moles of WO3 react to form 6 moles of W.

4. Convert moles of W to grams:

  - Multiply the number of moles of W by its molar mass (183.84 g/mol) to obtain the mass in grams.

After performing these calculations, the resulting value is 97.63 grams of W.

To learn more about  molar mass click here

brainly.com/question/31545539

#SPJ11

The wavelength of the photon produced when an electron in a Bohr model hydrogen atom jumps from the 2nd to the 4th energy level is approximately 1.22 x 10^-7 meters.

To calculate the wavelength of the photon, we need to find the energy difference between the two energy levels and use the formula E = hf, where E is the energy, h is Planck's constant, and f is the frequency.

The energy difference between energy levels in a hydrogen atom is given by the formula: ΔE = 13.6 * (1/n1^2 - 1/n2^2) eV. In our case, n1=2 and n2=4.

Calculating ΔE, we get approximately -3.03 eV. Converting this to joules, we have ΔE ≈ -4.85 x 10^-19 J.

Now, we use the formula E = hf, where h is Planck's constant (6.63 x 10^-34 Js), and the speed of light c = 3 x 10^8 m/s. By substituting the values and solving for the wavelength λ, we get λ ≈ 1.22 x 10^-7 meters.

Learn more about photon here:

https://brainly.com/question/31591565

#SPJ11

The pH of the mixture of nitric acid and sulfuric acid is approximately 2.70.To determine the pH of the mixture of nitric acid (HNO3) and sulfuric acid (H2SO4).

we need to consider their respective concentrations and dissociation constants.Both nitric acid (HNO3) and sulfuric acid (H2SO4) are strong acids that completely dissociate in water. The dissociation of nitric acid can be represented as:

HNO3 -> H+ + NO3-

And the dissociation of sulfuric acid can be represented as:

H2SO4 -> 2H+ + SO4^2-

Given that the volume of each acid is 35 ml and the concentration of each acid is 0.001 M, we have an equal number of moles for each acid.Since the acids are completely dissociated, the concentration of H+ ions in the mixture is twice the initial concentration, i.e., 0.002 M.

The pH of a solution is defined as the negative logarithm (base 10) of the H+ ion concentration. Therefore, we can calculate the pH using the equation:

pH = -log[H+]

pH = -log(0.002) ≈ 2.70

Therefore, the pH of the mixture of nitric acid and sulfuric acid is approximately 2.70.

To learn more about acid click here:

brainly.com/question/29037210

#SPJ11

To determine the volume of gaseous water collected use the balanced chemical equation and the concept of stoichiometry. The balanced equation for the reaction is 2H2(g) + O2(g) → 2H2O(g).

From the equation, we can see that 2 moles of H2 react with 1 mole of O2 to produce 2 moles of H2O.

Given that we have 8.6 L of H2 and 5.3 L of O2 at STP (Standard Temperature and Pressure), we can use the ideal gas law to convert the volumes to moles.

At STP, 1 mole of any ideal gas occupies 22.4 L.

Moles of H2 = 8.6 L / 22.4 L/mol = 0.3846 mol

Moles of O2 = 5.3 L / 22.4 L/mol = 0.2366 mol

Based on the balanced equation, we can see that the ratio of moles of H2O to O2 is 2:1. Therefore, the moles of H2O produced will be half the moles of O2.

Moles of H2O = 0.2366 mol / 2 = 0.1183 mol

Now, to convert the moles of H2O to volume, we use the ideal gas law again: Volume of H2O = Moles of H2O × 22.4 L/mol = 0.1183 mol × 22.4 L/mol = 2.647 L. Therefore, the volume of gaseous water collected is approximately 2.647 liters.

Learn more about concept of stoichiometry here

https://brainly.com/question/28780091

#SPJ11

a. The radioactive nuclide is 47¹⁰²Ag

b. The radioactive nuclide is 10²⁴Ne

c. The radioactive nuclide is 90²²³

a. 47¹⁰²Ag or 47¹⁰⁹Ag
The radioactive nuclide is 47¹⁰²Ag. It is unstable because it has a higher neutron-to-proton ratio than the stable nuclide 47¹⁰⁹Ag. Radioactive isotopes typically have imbalanced neutron-to-proton ratios.

b. 12²⁵Mg or 10²⁴Ne
The radioactive nuclide is 10²⁴Ne. This isotope of neon is unstable due to the presence of too few neutrons compared to protons. Stable magnesium, 12²⁵Mg, has a balanced neutron-to-proton ratio.

c. 81²⁰³Tl or 90²²³Th
The radioactive nuclide is 90²²³Th. This isotope of thorium is known to be unstable and undergoes radioactive decay, while 81²⁰³Tl is considered a stable isotope of thallium.

Know more about the Radioactive nuclide here :

https://brainly.com/question/31983829

#SPJ11

The difference in color of a ruby and an emerald is related to their chemical composition and structure. Both gems are made of different minerals and trace elements which affect the way they absorb and reflect light, giving them their distinct colors.

Rubies are made of the mineral corundum, which is mainly composed of aluminum oxide with traces of chromium, which gives the stone its red color. On the other hand, emeralds are made of the mineral beryl, which contains traces of chromium, vanadium, and iron that give the stone its green color.

Therefore, the difference in color between a ruby and an emerald is a result of their chemical makeup and the trace elements present within each gemstone.

To know more about chemical composition visit:-

https://brainly.com/question/16997829
#SPJ11

The Buoyancy for the Goodyear blimp Spirit of the Innovation comes from the 2.03 x 10⁵ ft³ of the helium. The mass of the helium at the 24.00 °C and the 0.995 atm pressure is the 0.94 g.

The  volume, V = 57.48 L

The temperature, T = 24°C = 24 + 273 K = 297 K

The pressure, P = 1.00 atm

The molar mass of the Helium = 4.003 g/mol

The ideas gas law is :

n = ( PV)  / (RT )

n =  ( 1 × 57.48 ) / (0.0821 ) × 297 )

n = 0.235 moles

The mass of the helium is as :

Mass = moles × molar mass

Mass = 0.235 × 4.003

Mass = 0.94 g

The mass of helium is 0.94 g.

To learn more about mass here

https://brainly.com/question/3195245

#SPJ4

To find the volume of chlorine gas at STP (standard temperature and pressure), we need to first determine the number of moles of Cl2 present in the given sample at 885 torr and 25°C using the Ideal Gas Law equation:

PV = nRT

Where:
P = pressure in atm
V = volume in L
n = number of moles
R = gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin

Converting the given pressure and temperature to atm and Kelvin, respectively, we get:

P = 885 torr / 760 torr/atm = 1.16 atm
T = 25°C + 273.15 = 298.15 K

Substituting these values into the Ideal Gas Law equation and solving for n, we get:

n = PV/RT = (1.16 atm)(8.40 L)/(0.0821 L atm/mol K)(298.15 K) = 0.378 mol

Now, at STP, the pressure is 1 atm and the temperature is 0°C or 273.15 K. Using the molar volume of a gas at STP (which is 22.4 L/mol), we can find the volume of Cl2 gas at STP:

V = n x 22.4 L/mol = 0.378 mol x 22.4 L/mol = 8.46 L

The volume of Cl2 gas at STP is 8.46 L.

we are given the volume, pressure, and temperature of Cl2 gas. Using the Ideal Gas Law equation, we can find the number of moles of Cl2 gas present in the given sample. Then, by using the molar volume of a gas at STP, we can find the volume of Cl2 gas at STP. It is important to convert the given pressure and temperature to the correct units (atm and Kelvin) before applying the Ideal Gas Law equation. To find the volume that Cl2 will occupy at STP, we'll use the combined gas law formula.
To know more about chlorine visit

https://brainly.com/question/31560014

#SPJ11

The empirical formula of the substance with 0.62400 grams of chromium and 1.42128 grams of selenium is Cr2Se3.

To calculate the empirical formula, we need to determine the mole ratio of the elements in the substance. To do this, we first convert the given masses of chromium and selenium to moles using their respective molar masses.
Moles of chromium = 0.62400 g / 52.00 g/mole = 0.012 mols
Moles of selenium = 1.42128 g / 78.96 g/mole = 0.018 mols
Next, we divide the mole quantities by the smallest of the two values. In this case, chromium has the smallest value of 0.012 moles. So, we divide both values by 0.012.
Moles of chromium (Cr) = 0.012 / 0.012 = 1
Moles of selenium (Se) = 0.018 / 0.012 = 1.5
Now we have the mole ratio of the elements, and we need to convert them to whole numbers by multiplying by a common factor. In this case, the common factor is 2.
Moles of Cr = 1 x 2 = 2
Moles of Se = 1.5 x 2 = 3
Finally, we write the empirical formula using the whole number mole ratios as subscripts. The empirical formula is Cr2Se3.
In conclusion, the empirical formula of the substance with 0.62400 grams of chromium and 1.42128 grams of selenium is Cr2Se3. This formula represents the smallest whole-number ratio of atoms in the substance, based on the given masses and molar masses of the elements. The calculation involves converting the masses to moles, finding the mole ratio, and multiplying by a common factor to obtain the empirical formula.

To know more about Empirical formula visit:

https://brainly.com/question/14044066

#SPJ11

Among the types of radiation, alpha, beta, gamma, and x-ray, the one that requires the least amount of protective clothing is x-ray radiation.

X-rays are a form of electromagnetic radiation, and they have a shorter wavelength than gamma rays, which means that they carry less energy. As a result, they are less harmful to living tissues and do not require as much protection. In many cases, only a lead apron or a lead vest is needed to shield the patient from x-rays during medical procedures.
Alpha and beta radiation, on the other hand, are particles that can cause significant damage to living tissues and require more extensive protective measures, such as gloves, masks, and full-body suits. Gamma radiation is also highly penetrative and requires thick layers of lead or concrete to shield against it.
In summary, x-ray radiation is the type of radiation that requires the least amount of protective clothing due to its lower energy and shorter wavelength compared to other types of radiation. However, it is still important to take appropriate safety precautions when working with x-rays to minimize exposure and potential harm.

learn more about radiation

https://brainly.com/question/31476599

#SPJ11