Please show all work:
If 40.0 grams of magnesium is reacted with an excess of nitric acid, HNO 3 , how many
grams of hydrogen gas will be produced?

Answers

Answer 1

3.3 g of hydrogen gas will be produced.

What is Stoichiometry ?

Stoichiometry helps to measure quantitative relationships between the amounts of products and reactants that are given in a reaction.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now we have to write the balanced equation

Mg + 2HNO₃  → Mg(NO₃)₂ + H₂

According to Stoichiometry

[tex]40.9\ \text{g Mg} \times \frac{1\ \text{mol Mg}}{24.31\ \text{g Mg}} \times \frac{1\ \text{mol}\ H_2}{1\ \text{mol Mg}} \times \frac{2.02\ g\ H_2}{1\ \text{mol}\ H_2}[/tex]

= 3.3 g H₂

Thus from the above conclusion we can say that 3.3 g of hydrogen gas will be produced.

Learn more about the Stoichiometry here: brainly.com/question/16060223

#SPJ1


Related Questions

1. Identify nucleophiles and electrophiles in the reaction in question.
2. Identify the type of reaction taking place, e.g., E1 or E2. 3. Account for any regio- or stereoselectivity display in the reaction.
4. Identify the rate-determining step.

Answers

Nucleophiles donate electrons, electrophiles accept electrons. Reaction type: E1 or E2. Consider regio-/stereoselectivity. Rate-determining step: slowest step.

In a reaction, nucleophiles are electron-rich species that donate electron pairs, while electrophiles are electron-poor species that accept electron pairs.

To determine whether a reaction is E1 or E2, analyze the reaction mechanism and identify the steps involved. Regioselectivity refers to the preference of one direction of chemical bond formation, while stereoselectivity pertains to the preference for one stereoisomer.

To account for regio- or stereoselectivity, consider the structure and stability of the intermediates or transition states.

The rate-determining step is the slowest step in the reaction, which governs the overall reaction rate.

For more such questions on electrons, click on:

https://brainly.com/question/26084288

#SPJ11

the use of instructions, modeling, rehearsal, and feedback to teach skills is called _____________________.

Answers

The use of instructions, modeling, rehearsal, and feedback to teach skills is called "skill acquisition". This term refers to the process of acquiring new skills or improving existing ones through the use of specific techniques and strategies.

Instructions involve providing the learner with clear and concise explanations of the skill to be learned, including its key components and any relevant rules or guidelines. Modeling involves demonstrating the skill in action, either through live demonstrations or through video examples.

Rehearsal involves practicing the skill repeatedly, with guidance and support as needed. This helps to develop muscle memory and increase the learner's confidence in performing the skill.

Feedback involves providing the learner with specific, constructive feedback on their performance, highlighting areas of strength as well as areas for improvement. This feedback can be used to refine the learner's technique and build mastery of the skill over time.

Together, these techniques form a comprehensive approach to skill acquisition, allowing learners to acquire new skills and improve existing ones in a structured and effective manner.

To know more about "skill acquisition" refer here :-

https://brainly.com/question/29603001#

#SPJ11

The rotational constant of127I35Cl is 3.423 GHz. Calculate the ICl bond length.

Answers

So the bond length of ICl is 3.009 Å.  

The rotational constant, also known as the g-factor, is a measure of the moment of inertia of a molecule around its axis of rotation. It is related to the shape of the molecule and the distribution of electrons within the molecule. The rotational constant is used to determine the rotational spectrum of a molecule.

The bond length is the distance between the nuclei of two atoms that are bonded together. The bond length can be calculated using the following formula:

bond length = √(2 * (atomic mass of the central atom + atomic mass of the bonded atom) / (2 * rotational constant))

Where the atomic mass of the central atom and the bonded atom are given in atomic mass units (amu) and the rotational constant is given in GHz.

In this case, the rotational constant of 127I35Cl is 3.423 GHz. The atomic mass of 127I is 209 amu and the atomic mass of 35Cl is 35.5 amu. The atomic mass of the central atom (127I) + the atomic mass of the bonded atom (35Cl) = 244 amu.

So the bond length can be calculated using the formula:

bond length = √(2 * (244 amu) / (2 * 3.423 GHz))

bond length = √(2 * 244 amu / 6.844 GHz)

bond length = 3.009 A

Learn more about bond length visit: brainly.com/question/28666623

#SPJ4

The rotational constant of a diatomic molecule is related to its moment of inertia and the bond length between its two atoms. Specifically, the rotational constant (B) is given by the equation B = h / (8π^2cI), where h is Planck's constant, c is the speed of light, and I is the moment of inertia of the molecule. The moment of inertia depends on the masses of the atoms and the distance between them, which is the bond length.

In this case, we know the rotational constant of 127I35Cl is 3.423 GHz. We can use this value and the equation above to calculate the moment of inertia of the molecule. Then, we can use the moment of inertia to calculate the bond length between iodine and chlorine atoms.
Rearranging the equation above to solve for I, we get I = h / (8π^c×B ). Substituting the given values, we get I = (6.626 x 10⁻³⁴J s) / (8π² x 3 x 10⁸ m/s x 3.423 x 10⁹ Hz) = 1.02 x 10⁻⁴⁴ kg m^2.
Next, we can use the moment of inertia to calculate the bond length. The moment of inertia (I) of a diatomic molecule is equal to the reduced mass (μ) times the square of the bond length (r)c x B2, where μ = (m^1 x m^2) / (m^2+ m^2) is the reduced mass and m^1 and m^2 are the masses of the atoms.
Rearranging this equation to solve for the bond length, we get r = sqrt(I / μ). Substituting the given masses of iodine and chlorine (126.90447 u and 34.96885 u, respectively) and converting to kilograms, we get μ = (126.90447 u x 1.66054 x 10⁻²⁷ kg/u x 34.96885 u x 1.66054 x 10⁻²⁷ kg/u) / (126.90447 u x 1.66054 x 10⁻²⁷ kg/u + 34.96885 u x 1.66054 x 10⁻²⁷ kg/u) = 3.36 x 10⁻²⁶ kg.∧
Finally, substituting the calculated values into the equation above, we get r = sqrt(1.02 x 10⁻⁴⁴kg m^2 / 3.36 x 10⁻²⁶ kg) = 1.997 Å. Therefore, the ICl bond length is approximately 1.997 angstroms.

Learn more about bond length  here:

https://brainly.com/question/30267265

#SPJ11

A 4.0-gram chunk of "dry ice" (solid CO2, which exists as a gas at room temperature and atmospheric pressure) is placed in a 2.0-L plastic soda bottle and the bottle is capped. In time, heat from the room (the temperature of which is 29 °C) transfers to the bottle, and all of the dry ice sublimes (i.e., the solid CO2 becomes gaseous). What is the "extra pressure" inside the plastic bottle above the 1 atm it started at when the solid CO2 was placed in it and the bottle sealed? (Note: the bottle still has air, so the 4.0-g of CO2 is accompanied by 1 atm of air pressure.) Why is it dangerous to heat a liquid in a closed container?

Answers

Heating a liquid in a closed container can be dangerous because the liquid can produce vapor or gas. If the container is sealed, the pressure inside the container can increase and cause the container to rupture or explode.

When the dry ice is placed in the plastic soda bottle, it starts to sublime due to the room temperature of 29°C. As the dry ice converts from a solid to a gas, the pressure inside the bottle increases. The pressure exerted by the 4.0-gram chunk of dry ice is equivalent to the pressure exerted by 2.14 L of CO2 gas at standard temperature and pressure (STP). The extra pressure inside the bottle can be calculated using the ideal gas law, PV=nRT. Assuming that the temperature remains constant at 29°C, and the volume of the bottle is 2.0 L, the pressure inside the bottle would be 6.8 atm.
Additionally, if the liquid is flammable, heating it in a closed container can lead to a fire or explosion. Therefore, it is always recommended to avoid heating liquids in closed containers and to use appropriate safety measures when working with potentially dangerous substances.

To know more about Pressure visit:
https://brainly.com/question/15175692
#SPJ11

Would you expect the reaction (1-butanol) to dissolve in the aqueous layer in the separatory funnel? why?

Answers

As 1-butanol is a polar molecule, it is not expected to dissolve in the aqueous layer in the separatory funnel, which is also polar. Rather, it is expected to remain in the organic layer, which is nonpolar.

This property is due to the "like dissolves like" rule, where polar molecules tend to dissolve in polar solvents and nonpolar molecules tend to dissolve in nonpolar solvents.

Therefore, during the separation process, the 1-butanol should separate into the organic layer and can be isolated from the aqueous layer.

Would you expect 1-butanol to dissolve in the aqueous layer in the separatory funnel?

1-butanol is a polar organic compound due to the presence of the hydroxyl group (OH) in its structure. However, it is also soluble in nonpolar solvents because of its alkyl chain. When using a separatory funnel, there are usually two immiscible layers formed: an organic layer and an aqueous layer. The principle of "like dissolves like" applies here, meaning that polar substances dissolve in polar solvents, and nonpolar substances dissolve in nonpolar solvents.

Although 1-butanol has some polar character, its solubility in water (the aqueous layer) is limited due to its longer alkyl chain. As the length of the alkyl chain increases, the nonpolar character of the molecule increases, which makes it less likely to dissolve in the polar aqueous layer.

In conclusion, you can expect 1-butanol to dissolve in the aqueous layer to some extent, but its solubility will be limited due to its nonpolar alkyl chain. It is more likely to dissolve in the organic layer in the separatory funnel.

To know more about butanol visit:

https://brainly.com/question/31021298

#SPJ11

The rate of effusion of neon to an unknown gas is 1.89. What is the other gas?
1) oxygen
2) chlorine
3) neon
4) krypton
5) hydrogen

Answers

The unknown gas is Krypton. The correct option is 4.

Using Graham's Law of Effusion, we can determine the identity of the unknown gas. The formula for Graham's Law is:

(rate of effusion of gas 1 / rate of effusion of gas 2) = √(Molar mass of gas 2 / Molar mass of gas 1)

Since the rate of effusion of neon to the unknown gas is 1.89, we can set up the equation as:

1.89 = √(Molar mass of unknown gas / Molar mass of neon)

Neon's molar mass is 20.18 g/mol. Now, let's compare this value with the molar masses of the other given gases:

1) Oxygen: 32 g/mol
2) Chlorine: 70.9 g/mol
4) Krypton: 83.8 g/mol
5) Hydrogen: 2 g/mol

Solving the equation for each option, we find that Krypton is the unknown gas, as the equation becomes:

1.89 ≈ √(83.8 / 20.18)

Therefore, the other gas is Krypton (option 4).

To know more about Graham's Law of Effusion, refer to the link below:

https://brainly.com/question/22359712#

#SPJ11

aluminum metal reacts with cl2 to form alcl3 (aluminum chloride). suppose we start with 3 moles of al, and 4 moles of cl2 :

Answers

Option e- Cl₂ is the limiting reagent, and the theoretical yield is 2.67 moles of AlCl₃ is the correct option.

To determine the limiting reagent and the theoretical yield, we need to compare the moles of aluminum (Al) and moles of chlorine (Cl₂) available. The balanced chemical equation for the reaction is:

2 Al + 3 Cl₂ → 2 AlCl₃

Given that we start with 3 moles of Al and 4 moles of Cl₂, let's calculate the moles of AlCl₃ produced by each scenario:

a) If Al is the limiting reagent, we can use the stoichiometry of the balanced equation to calculate the theoretical yield:

(3 moles Al) × (2 moles AlCl₃ / 2 moles Al) = 3 moles AlCl₃

So the theoretical yield is 3 moles of AlCl₃.

b) If Cl₂ is the limiting reagent, we compare the moles of Cl₂ and the stoichiometry:

(4 moles Cl₂) × (2 moles AlCl₃ / 3 moles Cl₂) = 2.67 moles AlCl₃

Thus, the theoretical yield is 2.67 moles of AlCl₃.

Comparing the theoretical yields, we find that the smaller value corresponds to the limiting reagent. Therefore, Cl₂ is the limiting reagent, and the theoretical yield is 2.67 moles of AlCl₃.

learn more about Limiting reagent here:

https://brainly.com/question/11848702

#SPJ11

complete the question is:

Aluminium chloride (AICl3) is created when aluminium metal interacts with Cl2. Assume that there are 3 moles of Al and 4 moles of Cl2 at the beginning.

a- Al is the limiting reagent, the theoretical yield of AlClg b is 3 moles.

b- The limiting reagent is Al, and the theoretical yield is 4.5 moles of AlClg_ neither reagent is limiting.

c. The theoretical yield is moles of AICl3 Cl2.

d. The theoretical yield is 4 moles of AlCl3 Cl2.

e. The theoretical yield is 2.67 moles of AiClg-

draw the structure of the cephalin with the oleic acid on c2.

Answers

Cephalin, also known as phosphatidylethanolamine, is a phospholipid found in cell membranes. It consists of a glycerol backbone, two fatty acid chains attached to the first and second carbons (C1 and C2), and a phosphoethanolamine group linked to the third carbon (C3).


To draw the structure of cephalin with oleic acid on C2, start by drawing the glycerol backbone, which is a three-carbon chain with hydroxyl groups (OH) attached to each carbon. Next, attach oleic acid to the C2 position. Oleic acid is an unsaturated fatty acid with the formula CH3(CH2)7CH=CH(CH2)7COOH, which has one cis double bond between carbons 9 and 10.
At the C1 position, add another fatty acid, typically a saturated fatty acid like palmitic or stearic acid. Finally, connect the phosphoethanolamine group to the C3 position of the glycerol backbone. This group consists of a phosphate (PO4) attached to the hydroxyl group at C3, with an ethanolamine (NH2CH2CH2OH) linked to the phosphate.
In summary, the structure of cephalin with oleic acid on C2 consists of a glycerol backbone with oleic acid at C2, another fatty acid at C1, and a phosphoethanolamine group at C3. This phospholipid plays a vital role in cell membrane structure and function.

Learn more about fatty acid here:

https://brainly.com/question/31752492

#SPJ11

should the melting and freezing point of aluric acid be the same

Answers

According to the theory of thermodynamics, the melting and freezing point of a substance should be the same under equilibrium conditions. Impurities can cause a difference between the two. Uric acid should have the same melting and freezing point if pure.

This is because melting and freezing are reverse processes of each other and occur at the same temperature when the substance is in equilibrium between its solid and liquid phases.

Therefore, if a substance such as uric acid is pure and under equilibrium conditions, its melting and freezing point should be the same.

However, if the substance is not pure or if there are some impurities present, the melting and freezing points may be different due to changes in the melting point depression or freezing point elevation.

To learn more about thermodynamics refer here:

https://brainly.com/question/1368306#

#SPJ11

Student B adds 24.000 g of copper shot to a 100 mL graduated cylinder. He gently taps the base of the cylinder to remove the air trapped between the copper shot pellets. The meniscus for the water rests at 25.4 mL. Calculate Student B's density for the metal shot. Show your work.​

Answers

To calculate the density of the copper shot, we need to divide the mass of the copper shot by its volume. The mass is given as 24.000 g, and the volume can be calculated by subtracting the initial volume (0 mL) from the final volume (25.4 mL) of the water in the graduated cylinder. The density can then be determined by dividing the mass by the volume.

The mass of the copper shot is given as 24.000 g.

To calculate the volume of the copper shot, we need to determine the volume of water displaced by the shot. The initial volume of the water is 0 mL, and the final volume, with the copper shot added, is 25.4 mL. Therefore, the volume of the copper shot is 25.4 mL.

Next, we convert the volume to the appropriate unit for density, which is cubic centimeters (cm³). Since 1 mL is equal to 1 cm³, the volume of the copper shot is 25.4 cm³.

Finally, we calculate the density by dividing the mass by the volume:

Density = mass/volume

Density = 24.000 g / 25.4 cm³

Performing the calculation, we find that the density of the copper shot is approximately 0.945 g/cm³.

Learn more about Density here: https://brainly.com/question/31237897

#SPJ11

The standard cell potential at 25 ∘C is 1.92 V for the reaction
Pb(s)+PbO2(s)+2H+(aq)+2HSO−4(aq)→2PbSO4(s)+2H2O(l)
What is the standard free-energy change for this reaction at 25 ∘C?
Express your answer with the appropriate units.

Answers

To calculate the standard free-energy change (ΔG°) for this reaction at 25 ∘C, we can use the equation:
ΔG° = -nFE°


where n is the number of electrons transferred in the reaction, F is the Faraday constant (96,485 C/mol), and E° is the standard cell potential.
In this reaction, two electrons are transferred, so n = 2. We are given E° = 1.92 V. Substituting these values into the equation, we get:
ΔG° = -2(96,485 C/mol)(1.92 V)
ΔG° = -371,430 J/mol
To express the answer with the appropriate units, we can convert joules to kilojoules:
ΔG° = -371,430 J/mol = -371.43 kJ/mol
Therefore, the standard free-energy change for this reaction at 25 ∘C is -371.43 kJ/mol.


Now, you can plug in the values and solve for ΔG°:
ΔG° = -(2 mol)(96,485 C/mol)(1.92 V)
ΔG° = -370,583.2 J/mol
Since it is more common to express the standard free-energy change in kJ/mol, divide the result by 1000:
ΔG° = -370.6 kJ/mol

To know more about free-energy visit :-

https://brainly.com/question/15319033

#SPJ11

simplify the expression by combining like terms: 5b2 + 9b + 10 + 3b + 2b2−4.

Answers

Answer: 7b² + 12b + 6

Explanation:

I am going to assume that by 5b2 and 2b2, it is meant to be 5b² and 2b².

Given:

     5b² + 9b + 10 + 3b + 2b² − 4

Reorder by like terms (terms that have the same degree):

     5b² + 2b² + 9b + 3b + 10 − 4

Combine like terms (add and/or subtract terms with the same degree):

➜ 5 + 2 = 7

➜ 9 + 3 = 12

➜ 10 - 4 = 6

     7b² + 12b + 6

To simplify the expression by combining like terms, we need to group together the terms Catalysis that have the same variable and the same exponent. 5b2 + 9b + 10 + 3b + 2b2 − 4 the results from step 2: 7b² + 12b + 6.

The expression given has terms with different variables and exponents. To simplify the expression, we need to group together the terms that have the same variable and exponent.  So, we rearrange the terms in the expression by collecting the like terms. In this case, we group the b2 terms together and the b terms together. We also group the constant terms together.

Identify like terms. In this case, the like terms are the terms with the same variable and exponent. We have three sets of like terms: b² terms (5b² and 2b²), b terms (9b and 3b), and constants (10 and -4).
Combine the like terms by adding or subtracting them. - Add the b² terms: 5b² + 2b² = 7b - Add the b terms: 9b + 3b = 12b- Add the constants: 10 + (-4) = 6
To know more about Catalysis visit:

https://brainly.com/question/30417381

#SPJ11

the molar solubility of a salt with a generic formula, cay2, was determined to be 9.1 x 10-7 m. using this information determine the solubility product constant for the salt.a. 3.0 x 10^-10b. 3.0 x 10^-18c. 9.1 x 10^-9d. 8.3 x 10^-17e. not enough information

Answers

The solubility product constant for the salt with the generic formula cay2 is option (b) [tex]3.0 * 10^{-18}.[/tex]

The solubility product constant (Ksp) is the product of the concentrations of the ions in a saturated solution of a sparingly soluble salt.

For the salt with the generic formula cay2, the dissociation equation is:

cay2(s) ⇌ [tex]Ca^{2+}(aq) + 2Y^-(aq)[/tex]

The molar solubility of the salt (s) is given as [tex]9.1 * 10^{-7}[/tex] M. Therefore, the concentrations of the ions in the saturated solution are [[tex]Ca^{2+}[/tex]] = s and [Y-] = 2s.

The Ksp expression for this salt is:

[tex]Ksp = [Ca^{2+}][Y^-]^2[/tex]

Substituting the expressions for the ion concentrations, we get:

[tex]Ksp = (s)(2s)^2 = 4s^3[/tex]

Now, substituting the value of s, we get:

[tex]Ksp = 4(9.1 * 10^{-7})^3 = 3.0 * 10^{-18}[/tex]

For more question on solubility click on

https://brainly.com/question/24057916

#SPJ11

The solubility product constant (Ksp) for the salt CaY2 can be determined by multiplying the molar solubility by itself and then multiplying by 4.

The solubility product constant (Ksp) is a measure of the extent to which a salt dissociates in a solution.

It is defined as the product of the concentration of the ions raised to their stoichiometric coefficients, each raised to a power equal to the number of ions produced by the dissociation. For the salt CaY2, the dissociation can be represented as:

CaY2 (s) ⇌ Ca2+ (aq) + 2Y- (aq)

The Ksp expression for this reaction is:

Ksp = [Ca2+][tex][Y-]^2[/tex]

The molar solubility of CaY2 is given as 9.1 x[tex]10^{-7}[/tex] M, which means that the concentration of Ca2+ ion is also 9.1 x [tex]10^{-7}[/tex] M, and the concentration of Y- ion is 2 × 9.1 x [tex]10^{-7}[/tex] M = 1.82 x 10^-6 M, since the stoichiometric coefficient of Y- is 2. Thus, the Ksp can be calculated as:

Ksp = [Ca2+][tex][Y-]^2[/tex]

= (9.1 x [tex]10^{-7}[/tex])(1.82 x [tex]10^{-6}[/tex])[tex]^{2}[/tex]

= 5.37 x [tex]10^{-18}[/tex]

However, the stoichiometric coefficient of CaY2 is 2, which means that the Ksp needs to be multiplied by 4 to obtain the correct value. Therefore, the correct answer is (b) 3.0 x [tex]10^{-18}[/tex]

Learn more about stoichiometric coefficient here :

https://.com/question/28213872

#SPJ11

A copper cylinder has a mass of 76.8 g and a specific heat of 0.092 cal/g·C. It is heated to 86.5° C and then put in 68.7 g of turpentine whose temperature is 19.5° C. The final temperature of the mixture is 31.9° C. What is the specific heat of the turpentine?​

Answers

The specific heat of the turpentine is 0.254 cal/g·C.

The specific heat of a substance is the amount of heat required to raise the temperature of one gram of the substance by one degree Celsius. In this problem, we are given the mass and specific heat of a copper cylinder and the initial and final temperatures of a mixture of the copper cylinder and turpentine. We are asked to find the specific heat of the turpentine.

To solve the problem, we can use the formula for heat transfer:

Q = mcΔT

where Q is the heat transferred, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.

We can use this formula to calculate the heat transferred from the copper cylinder to the turpentine:

Q(copper) = mc(copper)ΔT(copper) = (76.8 g)(0.092 cal/g·C)(86.5 C - 31.9 C) = 329.9 cal

Assuming no heat is lost to the surroundings, the heat transferred from the copper cylinder is equal to the heat transferred to the turpentine:

Q(turpentine) = mx(turpentine)ΔT(turpentine)

Solving for cturpentine, we get:

c(turpentine) = Q(turpentine) / (mx(turpentine)ΔT(turpentine))

Substituting in the known values and solving, we get:

c(turpentine) = 329.9 cal / (68.7 g)(31.9 C - 19.5 C) = 0.254 cal/g·C

Therefore, the specific heat of turpentine is 0.254 cal/g·C.

Learn more about specific heat at: https://brainly.com/question/26866234

#SPJ11

Determine the number of H2C-CH2 monomeric units in one molecule of polyethylene with a molar mass of 17,500 g.

Answers

One molecule of polyethylene with a molar mass of 17,500 g contains approximately 623 H2C-CH2 monomeric units.

To determine the number of H2C-CH2 monomeric units in one molecule of polyethylene with a molar mass of 17,500 g, we first need to understand the molecular formula of polyethylene. Polyethylene is a polymer made up of repeating monomeric units of ethylene, which has the chemical formula H2C=CH2.

The molar mass of polyethylene is given as 17,500 g. To calculate the number of monomeric units in one molecule of polyethylene, we need to divide the molar mass of polyethylene by the molar mass of one monomeric unit of ethylene.

The molar mass of one monomeric unit of ethylene can be calculated by adding the atomic masses of each element in the molecule. The atomic mass of hydrogen is 1.01 g/mol and the atomic mass of carbon is 12.01 g/mol. Therefore, the molar mass of one monomeric unit of ethylene is 2*(1.01 g/mol) + 2*(12.01 g/mol) = 28.05 g/mol.

Dividing the molar mass of polyethylene (17,500 g/mol) by the molar mass of one monomeric unit of ethylene (28.05 g/mol) gives us the number of monomeric units in one molecule of polyethylene.

17,500 g/mol ÷ 28.05 g/mol ≈ 623.08

Therefore, one molecule of polyethylene with a molar mass of 17,500 g contains approximately 623 H2C-CH2 monomeric units.

To know more about polyethylene click here:

https://brainly.com/question/14553941

#SPJ11

A drum contains 0.16 m3 of toluene. If the lid is left open (lid diameter is 0.92 m2), determine the
Time required to evaporate all the toluene.

Answers

To determine the time required to evaporate all the toluene in the drum, we need to calculate the rate of evaporation. This can be done using the formula:

rate of evaporation = (surface area of liquid exposed to air) x (vapor pressure of liquid) / (heat of vaporization of liquid)

The surface area of liquid exposed to air can be approximated by the lid area, which is 0.92 m2. The vapor pressure of toluene at room temperature is about 28.5 kPa. The heat of vaporization of toluene is about 383 kJ/kg.

Using these values, we can calculate the rate of evaporation as:

rate of evaporation = (0.92 m2) x (28.5 kPa) / (383 kJ/kg) = 0.068 kg/s

This means that 0.068 kg of toluene will evaporate per second. To evaporate all 0.16 m3 of toluene, we need to convert the volume to mass using the density of toluene, which is about 866 kg/m3. This gives:

mass of toluene = 0.16 m3 x 866 kg/m3 = 138.56 kg

Dividing this by the rate of evaporation gives us the time required to evaporate all the toluene:

time required = 138.56 kg / 0.068 kg/s = 2035.3 seconds or about 34 minutes.

Therefore, it would take about 34 minutes for all the toluene to evaporate if the drum lid is left open.

learn more about evaporate

https://brainly.in/question/1073834

#SPJ11

enter answer in the provided box. calculate the emf of the following concentration cell at 25°c: cu(s)/cu2 (0.066 m)/ /cu2 (1.109 m)/cu(s)

Answers

The Nernst equation can be used to determine the emf of the concentration cell:

E = (RT/nF)ln(Q) - E°

where n is the number of electrons transported during the redox reaction, E° is the standard emf, R is the gas constant, T is the temperature in Kelvin, F is the Faraday constant, and Q is the reaction quotient.

The Cu(s) electrode serves as the anode in this instance, and the Cu2+(1.109 M) electrode serves as the cathode. The partial responses are:

Cu(s) oxidises to Cu2+(0.066 M) + 2e-.

Cu(s) is produced by reducing Cu2+(1.109 M) by 2e-.

The general response is:

Cu2+(0.066 M) + Cu(s) = Cu(s) + Cu2+(1.109 M)

Q = [Cu2+(0.066 M)]/[Cu2+(1.109 M)] = 0.0594 as a result.

E° = 0.34 V is the standard emf for this cell as determined using standard reduction potentials.

The Nernst equation is solved for the following values:

E = 0.34 - (0.0257 V)ln(0.0594) = 0.227 V

As a result, the concentration cell's emf at 25 °C is 0.227 V.

For more such question on Nernst equation

https://brainly.com/question/31968419

#SPJ11

The calculated EMF of the concentration cell at 25°C is 0.356 V. In a concentration cell, the anode and cathode compartments are of the same composition, but the concentration of the ions is different.

The Cu/Cu2+ half-cell reaction is the same in both compartments, and the only difference is the concentration of Cu2+ ions. The higher concentration of Cu2+ ions in the cathode compartment leads to a more positive electrode potential.

The standard reduction potential for the Cu2+/Cu half-reaction is +0.34 V, and the Nernst equation can be used to calculate the EMF of the concentration cell.

The Nernst equation is Ecell = E°cell - (RT/nF) ln(Q), where E°cell is the standard EMF, R is the gas constant, T is the temperature in Kelvin, n is the number of electrons transferred, F is the Faraday constant, and Q is the reaction quotient.

In this case, n = 2, and Q is the ratio of the concentrations of Cu2+ ions in the cathode and anode compartments. Plugging in the values, we get Ecell = 0.34 V - (0.0257/2) ln(1.109/0.066) = 0.356 V.

Learn more about ions here :

https://brainly.com/question/17439197

#SPJ11

the average speed at which a nitrogen molecule effuses at 30.0 °c is 480 m/s. what should the average speed at which a butene molecule (c4h8) effuses at the same temperature?

Answers

The average speed at which a butene molecule effuses at 30.0 °C is approximately 348 m/s.

The rate of effusion of a gas is related to the average speed of its molecules. According to Graham's law, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. Therefore, if we know the rate of effusion and molar mass of one gas, we can use this relationship to calculate the rate of effusion for another gas.

In this case, we are given the average speed at which a nitrogen molecule effuses at 30.0 °C, which is 480 m/s. To find the average speed at which a butene molecule (C4H8) effuses at the same temperature, we need to calculate the ratio of the rates of effusion of butene and nitrogen, using their molar masses.

The molar mass of nitrogen is 28.02 g/mol, while the molar mass of butene is 56.11 g/mol. Therefore, the ratio of their rates of effusion is:

rate of effusion (butene) / rate of effusion (nitrogen) = √(molar mass (nitrogen) / molar mass (butene))

rate of effusion (butene) / 480 m/s = √(28.02 g/mol / 56.11 g/mol)

Solving for the rate of effusion of butene, we get:

rate of effusion (butene) = 480 m/s x √(molar mass (nitrogen) / molar mass (butene))

rate of effusion (butene) = 480 m/s x √(28.02 g/mol / 56.11 g/mol)

rate of effusion (butene) = 348 m/s (approx.)

Therefore, the average speed at which a butene molecule effuses at 30.0 °C is approximately 348 m/s. This is slower than the average speed of nitrogen molecules, because butene is a larger molecule with a higher molar mass, and according to Graham's law, larger molecules effuse more slowly than smaller ones.

To know more about effusion rates, refer to the link below:

https://brainly.com/question/2655041#

#SPJ11

What mass of ammonium chloride should be added to 2.60 l of a 0.145 m nh3 to obtain a buffer with a ph of 9.55? ( kb for nh3 is 1.8×10^−5 .)

Answers

To prepare a buffer solution with a pH of 9.55, we need to use the Henderson-Hasselbalch equation:

[tex]pH = pKa + log([A^-]/[HA])[/tex]

Where pH is the desired pH, pKa is the dissociation constant of NH3, [A^-] is the concentration of NH2^- (the conjugate base of NH3), and [HA] is the concentration of NH3 (the weak acid).

We know the concentration of NH3 is 0.145 M, and we can calculate the concentration of NH2^- using the equation:

[tex]Kb = [NH2^-][H3O^+] / [NH3][/tex]

Where Kb is the base dissociation constant of NH3, [NH2^-] is the concentration of NH2^-, [H3O^+] is the concentration of H3O^+ (which is equal to the concentration of OH^- in a basic solution), and [NH3] is the concentration of NH3.

Since the solution is basic, we can assume that [OH^-] = 10^(14-pH) = 10^(-4.55) M.

Using the Kb value and the concentration of NH3, we can solve for [NH2^-]:

1.8×10^−5 = [NH2^-] * [OH^-] / [NH3]

[NH2^-] = 1.8×10^−5 * [NH3] / [OH^-]

[NH2^-] = 1.8×10^−5 * 0.145 M / 10^(-4.55) M

[NH2^-] = 2.05×10^(-3) M

Now we can use the Henderson-Hasselbalch equation to calculate the ratio of [A^-]/[HA] that gives the desired pH:

9.55 = 9.24 + log([A^-]/[HA])

log([A^-]/[HA]) = 0.31

[A^-]/[HA] = 10^(0.31) = 1.97

Since the initial concentration of NH3 is 0.145 M, we can use the ratio [A^-]/[HA] to calculate the concentration of NH2^-:

[A^-]/[HA] = [NH2^-] / [NH3]

1.97 = [NH2^-] / 0.145 M

[NH2^-] = 0.286 M

The total volume of the buffer solution is 2.60 L, so we can use the concentration of NH2^- to calculate the moles of NH2^- needed:

0.286 M * 2.60 L = 0.744 mol NH2^-

The molar mass of NH4Cl is 53.49 g/mol, so we can convert moles of NH2^- to mass of NH4Cl:

0.744 mol NH2^- * 53.49 g/mol NH4Cl = 39.8 g NH4Cl

Therefore, we need to add 39.8 g of NH4Cl to 2.60 L of 0.145 M NH3 to obtain a buffer with a pH of 9.55.

To know more about refer Henderson-Hasselbalch equation here

brainly.com/question/13423434#

#SPJ11

The redox carriers that comprise most of the electron transport chain and are responsible for accepting and donating electrons are:

Answers

The redox carriers that comprise most of the electron transport chain and are responsible for accepting and donating electrons are Ubiquinone ,  Cytochrome ,  Iron-sulfur proteins , Flavoproteins .

1. Ubiquinone (also known as coenzyme Q) - it is a small, lipid-soluble molecule that shuttles electrons between Complexes I, II, and III in the inner mitochondrial membrane.

2. Cytochrome c - it is a small, water-soluble protein that carries electrons between Complex III and Complex IV in the inner mitochondrial membrane.

3. Iron-sulfur proteins - they are a group of proteins that contain clusters of iron and sulfur atoms that act as electron carriers in Complexes I, II, and III.

4. Flavoproteins - they are a group of proteins that contain a flavin molecule that accepts and donates electrons in Complexes I and II.

These redox carriers work together to transfer electrons from NADH and FADH2 to molecular oxygen, generating a proton gradient across the inner mitochondrial membrane that drives ATP synthesis.

To learn more about redox refer here:

https://brainly.com/question/15678074#

#SPJ11

how many resonance structures are required in the electron-dot structure of co32-?

Answers

The electron-dot structure of CO32- requires three resonance structures to accurately represent its bonding.

To determine the number of resonance structures required in the electron-dot structure of CO32-, we first need to draw the Lewis structure of the ion.

        O

        ||

-O -- C -- O-

In the Lewis structure of CO32-, we have a central carbon atom bonded to three oxygen atoms. Two of the oxygen atoms are single-bonded to the carbon atom and carry a negative charge, while the third oxygen atom is double-bonded.

To indicate the possibility of resonance structures, we can show the double bonds as a combination of a single bond and a lone pair of electrons. This gives us three resonance structures where one double bond can be in any location between C and O.

       O

        ||

-O -- C -- O-

       O-

        |

-O -- C = O

      O-

        |

O = C -- O-

To know more about resonance structures, click below.

https://brainly.com/question/8155254

#SPJ11

Once you have drawn a Lewis structure, you must count the electrons around each atom to make sure that each atom (except for H) has how many electrons around it?
a. 10
b. 4
c. 2
d. 8

Answers

You must count the electrons around each atom to make sure that each atom (except for H) has 8 electrons around it.

So, the correct answer is D.

Once you have drawn a Lewis structure, it's essential to count the electrons around each atom to ensure they follow the octet rule (except for hydrogen).

The octet rule states that atoms (excluding hydrogen) should have eight electrons around them to achieve a stable electron configuration.

So the correct answer is d. 8 electrons.

In a Lewis structure, you represent these electrons as dots or lines (each line represents a pair of electrons) to depict the bonding and non-bonding electrons involved in covalent bonds or lone pairs.

This representation helps you understand the molecule's structure, stability, and chemical properties.

Hence, the correct answer is D.

Learn more about atoms at https://brainly.com/question/6988524

#SPJ11

the hybridization of the nitrogen atom in the cation nh2 is: sp2

Answers

The given statement "the hybridization of the nitrogen atom in the cation [tex]NH_2^+[/tex] is: [tex]sp^2[/tex]" is true because the nitrogen atom in [tex]NH_2^+[/tex] is [tex]sp^2[/tex]hybridized due to presence of three electron domains, which include two single bonds to hydrogen atoms and one lone pair of electrons.

The hybridization of the nitrogen atom in the cation [tex]NH_2^+[/tex] can be determined by analyzing its molecular structure and the number of electron domains around the nitrogen atom. In the case of [tex]NH_2^+[/tex], the nitrogen atom is bonded to two hydrogen atoms and has one lone pair of electrons.

To calculate the hybridization, we need to count the number of electron domains around the nitrogen atom. Here, there are three domains: two single bonds to hydrogen atoms and one lone pair of electrons. This gives a total of three electron domains, which corresponds to [tex]sp^2[/tex]hybridization.

So, the statement "the hybridization of the nitrogen atom in the cation [tex]NH_2^+[/tex] is [tex]sp^2[/tex] " is true.

For more such questions on hybridization, click on:

https://brainly.com/question/15088849

#SPJ11

The probable question may be:

The hybridization of the nitrogen atom in the cation NH2+ is: sp2

State true or false

how many g of fe can be made from 75.0 g feo and 25.0 g mg

Answers

The maximum amount of Fe that can be produced is 57.4 g.

The balanced equation for the reaction between FeO and Mg is:

FeO + Mg -> Fe + MgO

From the equation, it can be seen that 1 mole of Fe is produced from 1 mole of FeO.

First, we need to determine the number of moles of FeO and Mg.

Number of moles of FeO = mass / molar mass = 75.0 g / 71.85 g/mol = 1.044 moles

Number of moles of Mg = mass / molar mass = 25.0 g / 24.31 g/mol = 1.029 moles

Next, we need to determine which reactant is limiting the reaction. We do this by comparing the mole ratio of FeO to Mg in the balanced equation. The ratio is 1:1, so the limiting reactant is the one with the smaller number of moles, which is Mg.

Therefore, the amount of Fe that can be produced is determined by the number of moles of Mg:

Number of moles of Fe = 1.029 moles

Finally, we calculate the mass of Fe using its molar mass:

Mass of Fe = number of moles x molar mass = 1.029 moles x 55.85 g/mol = 57.4 g

Therefore, 57.4 g of Fe can be produced.

To know more about the Fe refer here :

https://brainly.com/question/29140856#

#SPJ11

calculate the molar solubility (mol/l) of pbcro4. Ksp = 1.8 X 10^-14

Answers

The molar solubility of PbCrO4 is 1.34 x 10^-7 mol/L.

To calculate the molar solubility of PbCrO4, we need to use the Ksp value given, which is 1.8 x 10^-14. The equation for the dissociation of PbCrO4 is: PbCrO4 (s) ↔ Pb2+ (aq) + CrO42- (aq)

Let x be the molar solubility of PbCrO4 in moles per liter. Then, the equilibrium concentrations of Pb2+ and CrO42- are also x.

Using the Ksp expression for PbCrO4, we can write:
Ksp = [Pb2+][CrO42-] = x^2
Substituting the given Ksp value, we get:
1.8 x 10^-14 = x^2
Taking the square root of both sides, we get:
x = sqrt(1.8 x 10^-14) = 1.34 x 10^-7 mol/L
Therefore, the molar solubility of PbCrO4 is 1.34 x 10^-7 mol/L.

Here is a step by step explanation to calculate the molar solubility (mol/L) of PbCrO4 with Ksp = 1.8 x 10^-14

1. Write the balanced chemical equation for the dissolution of PbCrO4:
PbCrO4 (s) ⇌ Pb²⁺ (aq) + CrO₄²⁻ (aq)

2. Let the molar solubility of PbCrO4 be 'x'. At equilibrium, the concentration of Pb²⁺ and CrO₄²⁻ will also be 'x'.

3. Write the expression for Ksp:
Ksp = [Pb²⁺] * [CrO₄²⁻]

4. Substitute the equilibrium concentrations and Ksp value into the equation:
1.8 x 10^-14 = (x) * (x)

5. Solve for 'x':
x² = 1.8 x 10^-14
x = √(1.8 x 10^-14)
x ≈ 1.34 x 10^-7 mol/L

So, the molar solubility of PbCrO4 is approximately 1.34 x 10^-7 mol/L.


Learn more about molar solubility

https://brainly.com/question/16243859

#SPJ11

Calculate the pH of a solution prepared by mixing 50 mL of a 0.10 M solution of HF with 25 mL of a 0.20 M solution of NaF. The pKa of HF is 3.14.
A) 3.14 B) 10.80 C) 5.83 D) 7.35 E) 12.00

Answers

The pH of the solution is A) 3.14. To calculate the pH of the solution, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to its acid dissociation constant (pKa) and the ratio of the concentrations of the acid and its conjugate base. The correct answer is option-a.

HF is the acid in this case, and NaF is its conjugate base. We know the pKa of HF is 3.14, so we can calculate the Ka as 10^-pKa, which gives us 7.9 x 10^-4.
Next, we need to determine the concentrations of HF and NaF in the mixture. We can do this by using the formula:
moles = Molarity x volume (in liters)

For HF, we have:
moles = 0.10 M x 0.050 L = 0.005 moles

For NaF, we have:
moles = 0.20 M x 0.025 L = 0.005 moles

Therefore, the total moles of the acid and its conjugate base are equal, and the ratio of their concentrations is 1:1.

Plugging in these values into the Henderson-Hasselbalch equation, we get:
pH = pKa + log([NaF]/[HF])
pH = 3.14 + log(0.005/0.005)
pH = 3.14 + 0
pH = 3.14

Therefore, the pH of the solution is A) 3.14. Therefore, the correct answer is option-a.

For more question on solution

https://brainly.com/question/25326161

#SPJ11

what are the two general classifications of surface modification?

Answers

The two general classifications of surface modification are physical surface modification and chemical surface modification.

Physical surface modification refers to the processes that alter the surface properties of a material without changing its chemical composition.

Physical methods of surface modification include mechanical abrasion, polishing, etching, ion beam sputtering, plasma treatment, and thermal treatments.

These methods can change the surface roughness, topography, porosity, wettability, and other physical properties of the material.

Chemical surface modification, on the other hand, refers to the processes that alter the surface properties of a material by changing its chemical composition.

Chemical methods of surface modification include surface functionalization, grafting, coating, and doping. These methods can introduce new chemical groups or molecules onto the surface of the material, or modify existing chemical groups to alter the surface chemistry, reactivity, and other chemical properties of the material.

Both physical and chemical surface modification techniques have their advantages and disadvantages, and the choice of method depends on the specific application and desired surface properties.

To know more about  classifications  refer here

https://brainly.com/question/29693174#

#SPJ11

in the molecule hclo4, what is the total of the oxidation numbers of the one hydrogen and four oxygen atoms?

Answers

The total of the oxidation numbers of the one hydrogen and four oxygen atoms in HClO₄ is -7.

What is oxidation numbers?

Oxidation numbers are numbers assigned to atoms in a chemical compound to be able to determine the atom's charge. All atoms in their elemental form are assigned an oxidation number of zero.

Determine the oxidation number of chlorine (Cl). In molecules, the overall charge on the molecule is zero, so we can use this fact to help us determine the oxidation number of chlorine. HClO₄ is an acidic molecule, which has a -1 charge overall. So we know that the oxidation number of the Cl must be +7 in order for the overall charge to be -1.

Determine the oxidation number of hydrogen (H). Hydrogen typically has an oxidation number of +1. We can double check this by adding up all the oxidation numbers in the molecule and making sure they equal the overall charge of -1.

Determine the oxidation number of oxygen (O). Oxygen typically has an oxidation number of -2. We can double check this by adding up all the oxidation numbers in the molecule and making sure they equal the overall charge of -1.

Therefore, the total of the oxidation numbers of the one hydrogen and four oxygen atoms in HClO₄ is: 1 + (-2 × 4) = -7.

To learn more about oxidation numbers

https://brainly.com/question/15461660

#SPJ4

consider the reaction of 75.0 ml of 0.350 m c₅h₅n (kb = 1.7 x 10⁻⁹) with 100.0 ml of 0.425 m hcl. what quantity in moles of c₅h₅n would be present before the reaction takes place?

Answers

The quantity in moles of C₅H₅N present before the reaction takes place is 0.0263 moles

To determine the quantity in moles of C₅H₅N present before the reaction takes place, we can use the formula:

moles = concentration x volume

First, we need to calculate the moles of HCl:

moles of HCl = concentration x volume
moles of HCl = 0.425 M x 0.100 L
moles of HCl = 0.0425 moles

Since the reaction between C₅H₅N and HCl is a 1:1 ratio, the moles of C₅H₅N present before the reaction takes place will be equal to the moles of HCl:

moles of C₅H₅N = 0.0425 moles

Now, we can use the volume and concentration of C₅H₅N to calculate the initial moles:

moles of C₅H₅N = concentration x volume
moles of C₅H₅N = 0.350 M x 0.0750 L
moles of C₅H₅N = 0.0263 moles

Therefore, the quantity in moles of C₅H₅N present before the reaction takes place is 0.0263 moles.

To know more about Mole refer here :

https://brainly.com/question/29367909

#SPJ11

State how comparison of the resulting strips could indicate evolutionary relationships?

Answers

By comparing the resulting strips in an experiment, we can analyze and identify similarities and differences between organisms or species.

These comparisons can provide insights into evolutionary relationships and patterns of relatedness. If the resulting strips show similar patterns or sequences, it suggests a closer evolutionary relationship between the organisms or species being compared. This indicates that they share a more recent common ancestor and have undergone fewer genetic changes over time. On the other hand, if the resulting strips display different patterns or sequences, it suggests a more distant evolutionary relationship. This indicates that they have diverged from a common ancestor earlier in evolutionary history and have accumulated more genetic changes. By comparing the resulting strips from multiple organisms or species, scientists can construct phylogenetic trees or cladograms, which depict the evolutionary relationships based on shared or derived characteristics. These comparisons help us understand the relatedness and evolutionary history of different organisms and contribute to our understanding of biodiversity and the processes of evolution.

for more questions on experiment
https://brainly.com/question/24795637
#SPJ11

Other Questions
Explain why using different seed types along with different water temperatures is an improper experimental design. Match each industry with the urban area it is most associated with. Which statement is a postulate of general relativity?The speed of light is constant for all observers.Observers will see the same laws of physics whether at rest or in uniform motion.A gravitational field is the same as an object moving at the speed of light.Observers will see the same laws of physics in any frame of motion whether accelerated or not Which equation has a constant of proportionality equal to 10?Choose 1 answer: A. y = 2/20xB. y = 30/3xC. y = 12/2xD. y = 5/5x i need help please! I think I know the answer but for some reason my brain's telling me that it's wrong so if someone could explain how to get the answer so I can check that would be great. During ________, the project manager performs several activities to assess the size, scope, and complexity of the project and to establish procedures to support subsequent activities. Which condition is a heightened response that occurs after exposure to a noxious stimulus? Nutrient dense refers to foods that? There is a total of 32 cubic centimeters of a liquid in two beakers. one of these beakers contains 15 cubic centimeters of the liquid. how much liquid does the other beaker contain? a.13 cc b.15 cc c.16 cc d.17 cc Morty thinks his dog is losing his hair because Morty switched him to a new brand of food. Morty gradually reduces the amount of food from the new brand and increases the amount of the old brand until the dog is only eating the old brand of food. The adjustment of the type and amount of the dog's food is an example of: Question 6 of 20What is the common difference between consecutive terms in the followingarithmetic sequence?51, 47, 43, 39, ...OA. 3B. -3O C. -4D. 4 Find the surface area of the prism. Round to the nearest tenth if necessary. Suppose . has 4 critical points. List them in increasing lexographic order. By that we mean that (x, y) comes before (z, w) if or if and . Also, determine whether the critical point a local maximum, a local minimim, or a saddle point. Why is the immune system necessary inan organism?A. without it there would be nothing to fight off infectionB. it provides structure for the bodyC. the cells transfer oxygen around the bodyD. the organs in it help absorb nutrients for the body An idea, opportunity or dream is the ________ of planning that managers begin with to plan. Using the Left Hand Rule, if current points up andthe field is toward you, which way does the motionpoint?A. LeftB. Downc. UpD. Right A rectangular paperboard measuring 20 invhes long and 15 inches wide has a semicircle cut out of it, as shown below. What is the perimeter of the paperboard that remains after the semicircle is removed? (Use the value 3.14 for pie, and do not round your answer. Be sure to include the correct unit in your answer.) Why were standardized math symbols important to the field of mathematics?O They allowed bankers to keep track of money.O They made it easier to use the scientific method.O They made it easier for people to understand calculations.O They led to the creation of schools to teach mathematics. how many wins does efren bata reyes have Expanding Sentences With Adjectives 2The boy I babysit loves to watch TV shows. (little/superhero)