Please show your work



What is the Momentum of a 70kg runner traveling at 10m/s?




What is the momentum of an 800 kg Car traveling at 20 m/s?




What is the speed of a 0. 050 kg bullet traveling at 2,000kg*m/s?



What is the speed of a 60 kg runner that is traveling with the same momentum as the car in problem two?



What is the weight of a football traveling at 29m/s with a momentum of 20g*m/s?




What is the mass of a gorilla traveling at 13m/s with the same momentum as the runner in problem four?



What is the TOTAL FORCE on a soccer ball kicked with 30 N North and 75N West simultaneously? What is the direction?




A hockey puck is struck at the same time with the SAME force of 80N. One from the East and one from the South. What is the TOTAL FORCE and in what direction?




What is the PRESSURE exerted on the ground by a 10cm tall, by 12cm long, by 5cm wide box on the ground, with a FORCE of 25N?




What is the acceleration of a 6kg eagle flying with a force of 15N?

Answers

Answer 1

To find the total force, use vector addition. forces are acting at right angles, use the Pythagorean theorem.

Total force = √((30 N)^2 + (75 N)^2) = √(900 N^2 + 5625 N^2) = √(6525 N^2) = 80.81 N

Total force on a soccer ball kicked with 30 N North and 75 N West simultaneously:

Let's go through each question one by one:

Momentum of a 70 kg runner traveling at 10 m/s:

Momentum (p) = mass (m) × velocity (v)

p = 70 kg × 10 m/s

p = 700 kg·m/s

Momentum of an 800 kg car traveling at 20 m/s:

p = 800 kg × 20 m/s

p = 16,000 kg·m/s

Speed of a 0.050 kg bullet traveling at 2,000 kg·m/s:

p = 0.050 kg × v = 2,000 kg·m/s

v = 2,000 kg·m/s / 0.050 kg

v = 40,000 m/s

Speed of a 60 kg runner with the same momentum as the car in problem two:

Momentum is conserved when comparing two objects, so we can set up the following equation:

p_runner = p_car

m_runner × v_runner = m_car × v_car

60 kg × v_runner = 800 kg × 20 m/s

v_runner = (800 kg × 20 m/s) / 60 kg

v_runner = 266.67 m/s

Learn more about Pythagorean theorem here

https://brainly.com/question/14930619

#SPJ11


Related Questions

Calculate the expected pH of the HCl/NaOH solution for the following volumes of added base. Show your work. (25ml of HCl) (.1M)
a) 15 mL of base added:
b) 25 mL of base added:
c) 30 mL of base added:

Answers

The balanced chemical equation for the reaction of HCl and NaOH is:

HCl (aq) + NaOH (aq) → NaCl (aq) + H2O (l)

Since HCl and NaOH react in a 1:1 mole ratio, the moles of NaOH added will be equal to the moles of HCl present in the solution.

a) 15 mL of NaOH added:

Moles of NaOH added = 0.1 M x 0.015 L = 0.0015 molMoles of HCl initially present = 0.1 M x 0.025 L = 0.0025 mol

Excess moles of HCl = 0.0025 - 0.0015 = 0.0010 molFinal volume = 0.025 L + 0.015 L = 0.04 L

Concentration of HCl after reaction = 0.0010 mol / 0.04 L = 0.025 MpH = -log[H+] = -log(0.025) = 1.60

b) 25 mL of NaOH added:

Moles of NaOH added = 0.1 M x 0.025 L = 0.0025 molMoles of HCl initially present = 0.1 M x 0.025 L = 0.0025 mol

Excess moles of NaOH = 0.0025 - 0.0025 = 0 molFinal volume = 0.025 L + 0.025 L = 0.05 L

Concentration of HCl after reaction = 0.0025 mol / 0.05 L = 0.05 MpH = -log[H+] = -log(0.05) = 1.30

c) 30 mL of NaOH added:

Moles of NaOH added = 0.1 M x 0.03 L = 0.0030 molMoles of HCl initially present = 0.1 M x 0.025 L = 0.0025 mol

Excess moles of NaOH = 0.0030 - 0.0025 = 0.0005 molFinal volume = 0.025 L + 0.03 L = 0.055 L

Concentration of HCl after reaction = 0.0005 mol / 0.055 L = 0.0091 MpH = -log[H+] = -log(0.0091) = 1.04.

Learn More About Mole at https://brainly.com/question/15356425

#SPJ11

Draw lewis structures for the reaction of Ph3P and S8 and assign oxidation numbers to phosphorus and sulfur atoms. what kind of reaction takes place here?

Answers

The Lewis structures for the reaction between Ph₃P, and S₈ can be drawn as follows:

Ph₃P:

   H     H     H
   |     |     |
   P — C — C — C — H
          |
          Ph

S₈:

   S — S — S — S — S — S — S — S

When Ph₃P reacts with S₈, each sulfur atom in S₈ forms a bond with a phosphorus atom in Ph₃P, resulting in the formation of a chain-like structure with alternating sulfur and phosphorus atoms. The oxidation numbers of the phosphorus and sulfur atoms can be assigned based on the electronegativity difference between the two elements. Phosphorus has electronegativity of 2.19 and sulfur has electronegativity 2.58. Since phosphorus is less electronegative than sulfur, it will have a lower oxidation state.

In this case, the oxidation state of phosphorus is -1, and the oxidation state of sulfur is 0. This is because each phosphorus atom donates one electron to the sulfur atom it is bonded to, resulting in a net negative charge on the phosphorus atoms and a net neutral charge on the sulfur atoms.

The kind of reaction that takes place here is a redox reaction, in which electrons are transferred from the phosphorus atoms to the sulfur atoms. This results in the formation of a new compound with different properties than the starting materials.

To know more about Lewis structure, refer

https://brainly.com/question/20300458

#SPJ11

Consider the reaction represented by the following chemical equation: A(g) = 2B (g) K = 10.0 at 300K If a flask is filled with 0.200 atm of A (g) and 0.100 atm of B(8) at 300K, what would the partial pressure (in atm) of B (g) be when the reaction mixture reaches equilibrium? Assume that both the volume and temperature of the flask remain constant. Report your answer to at least three significant figures

Answers

The equilibrium constant expression for the reaction is K = [B]^2 / [A] he partial pressure of B at equilibrium is 0.2344 atm.

In chemistry, equilibrium refers to a state of balance in which the forward and reverse reactions of a chemical reaction occur at the same rate. At equilibrium, the concentrations of reactants and products remain constant over time, although the individual molecules are constantly undergoing reactions.Equilibrium is governed by the equilibrium constant, K, which is defined as the ratio of the concentration of products to the concentration of reactants, with each concentration raised to a power equal to the stoichiometric coefficient of the species in the balanced chemical equation. The value of K depends only on the temperature of the system, and is a measure of the position of the equilibrium.

To know more about equilibrium visit :

https://brainly.com/question/30807709

#SPJ11

Rank the protons from the highest to lowest chemical shift in their 1H NMR spectrum B>C>A C>B>A C>A>B A>B>C

Answers

The rank of protons from the highest to lowest chemical shift in their 1H NMR spectrum: C>A>B

The chemical shift of protons in 1H NMR spectrum depends on their chemical environment and the electron density around them. Protons in more electronegative environments experience greater shielding and thus appear at higher chemical shifts.

In this case, proton C is likely in a more electronegative environment than A and B, causing it to experience greater shielding and appear at a higher chemical shift. Proton A is likely in the least electronegative environment and thus experiences the least shielding, appearing at the lowest chemical shift. Therefore, the correct ranking of the protons from the highest to lowest chemical shift in their 1H NMR spectrum is C>A>B.

Learn more about chemical shift here:

https://brainly.com/question/30630744

#SPJ11

what fraction of the 40k that was on earth when it formed 4.5 ✕ 109 years ago is left today? The half life of 40K is 1.25 × 109 years.

Answers

Approximately 6.25% of the original ⁴⁰K that was present on Earth when it formed 4.5 × 10⁹ years ago is left today.

The half-life of ⁴⁰K is 1.25 × 10⁹ years, which means that after 1.25 × 10⁹ years, half of the original amount of ⁴⁰K will decay. After another 1.25 × 10⁹ years, half of what remains will decay, and so on. Using this information, we can calculate the fraction of ⁴⁰K that is left today.

Let's define the original amount of ⁴⁰K as 1. Then after 1.25 × 10⁹ years, half of it will remain, which is 0.5. After another 1.25 × 10⁹ years, half of that will remain, which is 0.25. Continuing in this way, we can calculate the amount of ⁴⁰K that is left today as:

1 × (1/2)⁴ = 1/16

Therefore, the fraction of ⁴⁰K that is left today is 1/16 or approximately 6.25% of the original amount.

learn more about Half- life here:

https://brainly.com/question/24710827

#SPJ11

The atomic weight of hydrogen is 1.008 amu. What is the percent composition of hydrogen by isotope, assuming that hydrogen's only isotopes are 1H and 2D?
A. 92% H, 8% D
B. 99.2% H, 0.8% D
C. 99.92% H, 0.08% D
D. 99.992% H, 0.008% D

Answers

The percent composition of hydrogen by isotope, assuming that hydrogen's only isotopes are 1H and 2D, is 99.2% H and 0.8% D. (B)


1. The atomic weight of hydrogen is given as 1.008 amu.
2. The isotopes of hydrogen are 1H (with a mass of 1 amu) and 2D (with a mass of 2 amu).
3. To find the percent composition, we need to determine the relative abundance of each isotope.
4. Since the atomic weight is an average of the isotopic masses weighted by their abundance, we can set up an equation: (1 * x) + (2 * (1-x)) = 1.008, where x represents the relative abundance of 1H.
5. Solving for x, we get x = 0.992.
6. The relative abundance of 2D is 1-x = 0.008.
7. Convert these abundances to percentages: 1H is 99.2% and 2D is 0.8%.(B)

To know more about relative abundance click on below link:

https://brainly.com/question/1594226#

#SPJ11

he vapor pressure of water at 80°c is 355.torr. calculate the vapor pressure in mmhg and atm. round each of your answers to 3 significant digits.

Answers

The vapor pressure of water at 80°C is 355 torr. We need to calculate the vapor pressure in mmHg and atm.



To convert torr to mmHg, we simply need to multiply the value in torr by 1 mmHg/1 torr.

So, the vapor pressure in mmHg can be calculated as:

355 torr x (1 mmHg/1 torr) = 355 mmHg

To convert torr to atm, we need to divide the value in torr by 760 torr/atm. So, the vapor pressure in atm can be calculated as:

355 torr ÷ 760 torr/atm = 0.467 atm

We need to round each answer to 3 significant digits, so the vapor pressure in mmHg is 355 mmHg and the vapor pressure in atm is 0.467 atm.

The vapor pressure of water at 80°C is 355 torr, which is equivalent to 355 mmHg and 0.467 atm.

To know more about vapor pressure, visit:

https://brainly.com/question/11864750

#SPJ11

The rest mass of a proton is 1.0072764666 amu and that of a neutron is 1.0086649158 amu. The 31P nucleus weighs 30.973761 amu. Calculate the binding energy of the nucleus.

Answers

The binding energy of the 31P nucleus is approximately 255.1 MeV. To calculate the binding energy of the 31P nucleus, we first need to calculate its total mass.


This can be done by adding up the masses of its constituent particles, which are 15 protons and 16 neutrons:
Total mass of 31P nucleus = (15 x 1.0072764666 amu) + (16 x 1.0086649158 amu) = 30.973761 amu. This is the same as the given mass of the 31P nucleus, so we know that it is a stable nucleus. However, we can also calculate the binding energy of the nucleus, which is the amount of energy required to break it apart into its constituent particles.

The binding energy can be calculated using Einstein's famous equation, E=mc^2, where E is the energy equivalent of mass, m is the mass difference between the nucleus and its constituent particles, and c is the speed of light. In other words, the binding energy is equal to the difference in mass between the nucleus and its constituent particles, multiplied by the speed of light squared.

To know more about binding energy visit :-

https://brainly.com/question/31817434

#SPJ11

Give the structure of the major and minor organic products formed when HBr reacts with (E)-4,4-dimethyl-2-pentene in the presence of peroxides. When drawing hydrogen atoms on a carbon atom, either include all hydrogen atoms or none on that carbon atom, or your structure may be marked incorrect.In each reaction box, place the best reagent and conditions from the list below.

Answers

The structure of the major and minor organic products formed when HBr reacts with (E)-4,4-dimethyl-2-pentene in the presence of peroxides is shown in the image attached.

Reaction of (E)-4,4-dimethyl-2-pentene with HBr by free radical mechanism

The reaction is initiated by the hom---olytic cleavage of H-Br bond to form two free radicals, hydrogen (H•) and bromine (Br•), which are highly reactive and unstable.

The free radical bromine (Br•) reacts with the alkene (E)-4,4-dimethyl-2-pentene to form a more stable carbon-centered free radical intermediate.

The product is washed with aqueous HCl to remove any remaining impurities and neutralize the solution.

Learn more about free radical mechanism:https://brainly.com/question/11631123

#SPJ1

In the reaction 2Cr+3Ni 2+
→3Ni+2Cr 3+
, the species oxidized is:

Answers

The species that has been oxidized in this reaction is chromium (Cr).

In the given reaction, the oxidation state of chromium changes from +2 to +3, while the oxidation state of nickel changes from +3 to +2. This indicates that chromium has lost electrons and nickel has gained electrons. Therefore, chromium is the species that has been oxidized in this reaction.

To further explain, oxidation is defined as the loss of electrons or an increase in oxidation state, while reduction is defined as the gain of electrons or a decrease in oxidation state. In this reaction, the oxidation state of chromium has increased from +2 to +3, indicating that it has lost electrons and has been oxidized. On the other hand, the oxidation state of nickel has decreased from +3 to +2, indicating that it has gained electrons and has been reduced.

Therefore, the species that has been oxidized in this reaction is chromium (Cr).

To know more about chromium click here:

https://brainly.com/question/681602

#SPJ11

what is the iupac name for the following compound? group of answer choices 2-methylhexanoic acid none of these 3-methylhexanoic acid 2−methylpentanoic acid 3-methylpentanoic acid

Answers

The IUPAC name for the given compound is 3-methylhexanoic acid. To arrive at this name, we need to follow a few rules laid down by the IUPAC. Firstly, we need to identify the longest carbon chain in the compound, which contains the functional group (-COOH) and number the carbons in the chain accordingly. Here, we can see that the longest chain has six carbons, so it is a hexanoic acid. Next, we need to identify and name any substituents attached to the main chain. In this compound, we have a methyl group attached to the third carbon, so it becomes 3-methylhexanoic acid. Therefore, the correct IUPAC name for the given compound is 3-methylhexanoic acid. It is important to use correct IUPAC names for compounds to avoid confusion and ensure that everyone is referring to the same molecule.
The IUPAC name for the given compound is 3-methylhexanoic acid. In this compound, the methyl group is attached to the third carbon in the hexanoic acid chain, which consists of six carbon atoms. When numbering the carbon atoms, start from the carboxyl group (COOH) as carbon 1, and count along the chain. The methyl group is attached to the third carbon, resulting in the name 3-methylhexanoic acid.

find the asymptotes of the hyperbola (y−4)216−(x−8)264=1.

Answers

The asymptotes of the hyperbola are y = (1/4)(x - 8) + 4 and y = -(1/4)(x - 8) + 4

To find the asymptotes of a hyperbola, we need to use the standard form of a hyperbola

[(y - k)² / a²] - [(x - h)² / b²] = 1

where (h,k) is the center of the hyperbola, a is the distance from the center to the vertices in the y direction, and b is the distance from the center to the vertices in the x direction.

Comparing this to the equation given, we can see that the center of the hyperbola is at (8,4), a² = 16, and b² = 64.

To find the asymptotes, we use the formula

y - k = ±(a/b)(x - h)

Substituting the values we know, we get

y - 4 = ±(2/8)(x - 8)

Simplifying this expression, we get

y - 4 = ±(1/4)(x - 8)

These are two straight lines that intersect at the center of the hyperbola and approach the hyperbola as the distance from the center increases.

To know more about hyperbola here

https://brainly.com/question/19989302

#SPJ4

-- The given question is incomplete, the complete question is

"Find the asymptotes of the hyperbola (y−4)²/16−(x−8)²/64=1." --

1. record the temperature of the saturated borax solution.

Answers

To record the temperature of the saturated borax solution, you will need to use a thermometer to measure the temperature of the solution. Simply dip the thermometer into the solution and read the temperature. It is important to note that the temperature can affect the solubility of borax, so it is important to maintain a consistent temperature when working with this solution.

To record the temperature of the saturated borax solution, please follow these steps:

1. Prepare a saturated borax solution by dissolving borax in water until no more borax can dissolve, and the solution reaches a state of saturation.
2. Allow the solution to sit undisturbed for a few minutes to ensure even temperature distribution.
3. Using a clean and calibrated thermometer, insert the thermometer into the saturated borax solution, making sure it is fully submerged but not touching the bottom or sides of the container.
4. Wait for the temperature reading on the thermometer to stabilize, which typically takes about 30 seconds to 1 minute.
5. Once the temperature reading is stable, record the temperature of the saturated borax solution as indicated on the thermometer. Make sure to note the unit of measurement (e.g., Celsius or Fahrenheit).

Learn more about the temperature at https://brainly.com/question/14820864

#SPJ11

A solution that is 0.205 M in CH3NH2 and 0.100 M in CH3NH3Br. Solve an equilibrium problem ( using an ICE table) to calculate the pH of each solution

Answers

The pH of the solution which has 0.205 M CH₃NH₂ and 0.100 M in CH₃NH₃Br in is 11.59.

The reaction involved is

CH₃NH₂ + H₂O ⇌ CH₃NH₃+ + OH⁻

The equilibrium constant expression for this reaction is

Kb = ([CH₃NH₃⁺][OH⁻])/[CH₃NH₂]

The Kb for CH₃NH₂ is 4.4 × 10⁻⁴ at 25°C.

To solve the problem, we can set up an ICE table attached

Substituting the equilibrium concentrations into the Kb expression, we get

4.4 × 10⁻⁴ = (0.100 + x) × x / (0.205 - x)

Simplifying and solving for x, we get

x = 2.6 × 10⁻⁴ M

Therefore, [OH⁻] = [CH₃NH₃⁺] = 2.6 × 10⁻⁴ M

The pH of the solution can be calculated using the equation

pH = 14 - pOH

pH = 14 - (-log10[OH-])

pH = 11.59

To know more about pH here

https://brainly.com/question/2288405

#SPJ4

when we titrate oxalate ions with permanganate ions, why is the iron(iii) ion of our complex not also oxidized?

Answers

When we titrate oxalate ions with permanganate ions, the iron (III) ion of our complex is not oxidized because it is not susceptible to oxidation by permanganate ions. This is because the iron (III) ion is already in its highest oxidation state and is relatively stable in that state. The oxidation state of the iron ion in the complex is +3, which means that it has already lost three electrons and is highly oxidized.

Permanganate ions are powerful oxidizing agents, and they have a high tendency to oxidize other substances that are susceptible to oxidation. In the case of oxalate ions, they have a relatively low oxidation state, and they are susceptible to oxidation by permanganate ions. Therefore, the permanganate ions oxidize the oxalate ions, causing a color change in the solution from pink to colorless.

In conclusion, the iron (III) ion of our complex is not oxidized during the titration of oxalate ions with permanganate ions because it is already in its highest oxidation state, and it is relatively stable in that state. The oxidation of oxalate ions occurs due to their low oxidation state, which makes them susceptible to oxidation by permanganate ions.

To know more about permanganate ions visit:

https://brainly.com/question/30572418

#SPJ11

The exothermic reaction 2NO2(g) <=> N2O4(g), is spontaneous...
at what temperature? high or low?

Answers

The exothermic reaction 2NO2(g) <=> N2O4(g) is spontaneous at high temperatures.

To determine at what temperature the exothermic reaction 2NO2(g) <=> N2O4(g) is spontaneous, we need to consider the sign of the Gibbs free energy change (ΔG) of the reaction.

If ΔG < 0, the reaction is spontaneous and will proceed in the forward direction. If ΔG > 0, the reaction is non-spontaneous and will not proceed in the forward direction. If ΔG = 0, the reaction is at equilibrium and there is no net change in the concentrations of the reactants and products.

The relationship between ΔG, enthalpy change (ΔH), and entropy change (ΔS) is given by the equation ΔG = ΔH - TΔS, where T is the temperature in Kelvin.

For the exothermic reaction 2NO2(g) <=> N2O4(g), the enthalpy change (ΔH) is negative, since the reaction is exothermic. However, the entropy change (ΔS) is also negative, since two molecules of NO2(g) are converted into one molecule of N2O4(g), which reduces the number of gas molecules in the system.

At low temperatures, the term -TΔS dominates the equation, and the value of ΔG is positive, meaning that the reaction is non-spontaneous. At high temperatures, the term -TΔS becomes less significant, and the negative value of ΔH dominates the equation, resulting in a negative value of ΔG, which means that the reaction is spontaneous.

To know more about exothermic reaction:

https://brainly.com/question/10373907

#SPJ11

How does the volume of 1 mol of an ideal gas change if the temperature and the pressure are both decreased by a factor of four?a) decreases by four times.b) decreases by sixteen times.c) increases by four times.d) increases by sixteen times.e) remains unchanged.

Answers

To determine how the volume of 1 mol of an ideal gas changes when both the temperature and pressure are decreased by a factor of four, we will use the Ideal Gas Law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Initially, let the volume be V1, the pressure be P1, and the temperature be T1. After decreasing the temperature and pressure by a factor of four, let the new volume be V2,

the new pressure be P2 (P1/4), and the new temperature be T2 (T1/4).

Using the Ideal Gas Law for both initial and final conditions:


P1 * V1 = nRT1


(P1/4) * V2 = nR(T1/4)


Now, divide the second equation by the first equation:

(V2 / V1) = (P1 / (P1/4)) * (T1/4 / T1)

Simplifying the equation, we get:

(V2 / V1) = (4) * (1/4)

(V2 / V1) = 1


Therefore, the volume remains unchanged. So, the answer is (e) remains unchanged.

To know more about ideal gas  refer here

https://brainly.com/question/31463642#

#SPJ11

how many grams of cuso4 · 5h2o are needed to prepare 20 ml solution of concentration 0.5m?

Answers

2.50 grams of [tex]CuSO_4 . 5H_2O[/tex] are needed to prepare a 20 ml solution of 0.5 M concentration.

We first need to determine the molar mass [tex]CuSO_4 . 5H_2O[/tex], which is 249.68 g/mol.

Next, we can use the formula for molarity:

Molarity = moles of solute/volume of solution in liters

To find the number of moles of [tex]CuSO_4 . 5H_2O[/tex] needed for a 20 ml solution of 0.5 M concentration, we can rearrange the formula:

moles of solute = Molarity x volume of solution in liters

moles of solute = 0.5 M x 0.02 L = 0.01 moles

We can use the molar mass to calculate the mass of [tex]CuSO_4 . 5H_2O[/tex] needed:

mass = 0.01 mol x 249.68 g/mol = 2.50 g

To know more about Molarity, here

brainly.com/question/8732513

#SPJ4

Explain how a raindrop travels after it hits this bike umbrella until it slides off the umbrella. You must use 1 specific properties of water (1 pt) we discussed in class and explain (1 pt) that property of water

Answers

After hitting a bike umbrella, a raindrop travels until it slides off due to the property of surface tension, which allows water molecules to stick together and create a cohesive force.

One specific property of water that influences the travel of a raindrop on a bike umbrella is surface tension. Surface tension is the cohesive force between water molecules at the surface of a liquid.

When a raindrop hits the umbrella, it adheres to the surface due to surface tension. Water molecules have a strong attraction to each other, causing them to stick together and form a cohesive droplet. As more raindrops accumulate on the umbrella, the cohesive force increases, allowing the water to spread and form a thin film.

Eventually, the force of gravity overcomes the surface tension, causing the raindrop to slide off the umbrella. The property of surface tension plays a crucial role in the behavior of raindrops on various surfaces, including the movement and sliding off of water droplets on a bike umbrella.

Learn more about Surface tension here: brainly.com/question/571207

#SPJ11

A solid with a mass of 200g at its melting point temperature in a coffee cup calorimeter. While the substance changes from a solid to a liquid at the asme temperature of 30 degrees C.
a) How much heat did the water lose while the substance melted?
b) What is the heat of the fusion of the substance that melted?
c) If the substance has a molar mass of 16.35 g/mol, calculate the kilojuoles required to melt 3.28 mol of the substance

Answers

a) The water lost 6,600 J of heat while the substance melted.
b) The heat of fusion of the substance is 33 J/g.

a) To calculate how much heat the water lost while the substance melted, we need to use the formula Q = m * ΔH, where Q is the heat lost, m is the mass of water, and ΔH is the heat of fusion of the substance. Since the substance melted at 30 degrees C, we assume that the water also lost heat to cool down to that temperature. Assuming the specific heat capacity of water is 4.184 J/g·°C, we can calculate that the water lost 1,580 J to cool down to 30 degrees C. Therefore, the water lost 6,600 J of heat while the substance melted.

b) The heat of fusion of the substance can be calculated by using the formula Q = m * ΔH, where Q is the heat lost, m is the mass of the substance, and ΔH is the heat of fusion. Substituting the given values, we get ΔH = Q / m = 6,600 J / 200 g = 33 J/g.

c) To calculate the kilojoules required to melt 3.28 mol of the substance, we first need to calculate the mass of the substance. Using the molar mass given (16.35 g/mol), we get 3.28 mol * 16.35 g/mol = 53.718 g. Then, we can use the formula Q = m * ΔH, where ΔH is the heat of fusion calculated in part b. Substituting the values, we get Q = 53.718 g * 33 J/g = 1,773.294 J. Converting this to kilojoules, we get 1.773 kJ.

To know more about the heat visit:

https://brainly.com/question/10763306

#SPJ11

a sample of nitrogen gas at 1.00 atm is heated rom 250 k to 500 k. if the volume remains constant, what is the final pressure?

Answers

The final pressure of the nitrogen gas is 2.00 atm when heated from 250 K to 500 K at constant volume.

The ideal gas law states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature in Kelvin. Since the volume is constant, we can rearrange the equation to solve for pressure:

P = nRT/V

The number of moles of gas (n) and the gas constant (R) are constant, so we can simplify the equation further:

P ∝ T

This means that pressure is directly proportional to temperature, assuming the volume and number of moles of gas remain constant. Therefore, we can use the following equation to solve for the final pressure:

P₂ = P₁(T₂/T₁)

where P₁ and T₁ are the initial pressure and temperature, respectively, and P₂ and T₂ are the final pressure and temperature, respectively.

Substituting the given values, we get:

P₂ = 1.00 atm × (500 K / 250 K) = 2.00 atm

For more question on pressure visit:

https://brainly.com/question/24719118

#SPJ11

Highest normal boiling point, and most volatile? Please explain why. a) water. b) TiCl4. c) ether. d) ethanol. e) acetone

Answers

To determine the highest normal boiling point and most volatile among a) water, b) TiCl4, c) ether, d) ethanol, and e) acetone, we'll need to consider their boiling points and molecular properties.

The boiling points of these compounds are:
a) Water: 100°C
b) TiCl4: 136.4°C
c) Ether: 34.6°C (diethyl ether)
d) Ethanol: 78.4°C
e) Acetone: 56.1°C

The highest normal boiling point belongs to TiCl4 (136.4°C), which is due to its strong ionic bonding between the titanium and chloride ions. This bonding makes it harder for the molecules to escape the liquid phase, requiring more heat energy to reach its boiling point.

The most volatile compound is ether (34.6°C). Volatility refers to how easily a substance vaporizes at a given temperature. Ether has a low boiling point and weak intermolecular forces (Van der Waals forces) due to its nonpolar nature, which allows its molecules to vaporize more easily compared to the other compounds listed.

To know more about volatile compound : https://brainly.com/question/1163824

#SPJ11

the following tertiary alkyl halide was heated in ethanol for several days, and the resulting mixture of products contained five different elimination products and two substitution products: a)Draw the substitution products and identify the relationship between them.b)Identify which substitution product is expected to be favored, and explain why.c)Draw all elimination products, and identify which products are stereoisomers.d)For each pair of stereoisomericalkenes,identify which stereoisomer is expected to be favored.

Answers

a. Product 2 is formed when the ethyl group in Product 1 is replaced by a hydrogen atom.

b. The substitution product that is expected to be favored is Product 1, Ethylcyclohexane.

c. Product 3, Product 4, Product 5, Product 6, Product 7. Products 4 and 5, as well as Products 6 and 7, are stereoisomers of each other.

d. Product 7 is the only trans-1,3-diethylcyclohexene and is the only product of its kind, so it is favored by default.



The given tertiary alkyl halide was subjected to elimination reactions in ethanol, resulting in a mixture of five different elimination products and two substitution products. Let's take a closer look at each of the products.
a) The two substitution products can be drawn as follows:
- Product 1: Ethylcyclohexane
- Product 2: Cyclohexene
These two products are related by the fact that Product 2 is derived from the elimination of a hydrogen atom from one of the carbons in Product 1. In other words, Product 2 is formed when the ethyl group in Product 1 is replaced by a hydrogen atom.
b) This is because the elimination of a hydrogen atom from a tertiary carbon atom requires a strong base and high temperatures. In the given reaction conditions (ethanol, several days), elimination from a tertiary carbon is less favorable than substitution.
c) The five elimination products can be drawn as follows:
- Product 3: 1-Ethylcyclohexene
- Product 4: cis-1,2-Diethylcyclohexene
- Product 5: trans-1,2-Diethylcyclohexene
- Product 6: cis-1,3-Diethylcyclohexene
- Product 7: trans-1,3-Diethylcyclohexene
Products 4 and 5, as well as Products 6 and 7, are stereoisomers of each other.
d) In general, the favored stereoisomer in elimination reactions is the more substituted alkene. This is because elimination reactions follow Zaitsev's rule, which states that the major product is the more substituted alkene. Therefore, in this case:
- Products 3 and 5 are stereoisomers of each other, and the trans isomer (Product 5) is favored.
- Products 4 and 6 are stereoisomers of each other, and the cis isomer (Product 4) is favored.
- Product 7 is the only trans-1,3-diethylcyclohexene and is the only product of its kind, so it is favored by default.

To know more about alkyl halide visit:

brainly.com/question/31831733

#SPJ11

in preparing a series of standards for calibration of colorimeter a stock solution of 0.100 m niso4 (molar mass =154.76g/mol) solution was required . to prepare this stock solution7.74 g of NiSO4 should be added to a 500.0mL volumetric flask and the volume made up to the calibration mark with deionized water. 07.74g of NiSO4 should be added to 500.0 mL of deionized water in a volumetric flask. 15.5 g of NISO4 should be added to 500.0 mL of deionized water in a volumetric flask. 15.5 g of NiSO4 should be added to a 500.0 mL volumetric flask and the volume made up to the calibration mark with deionized water. 15.5g of NiSO4 should be added to 500.0 mL of deionized water in a beaker.

Answers

To prepare a 0.100 M NiSO4 stock solution for the calibration of a colorimeter,7.74g of NiSO₄ should be added to a 500.0 mL volumetric flask and make up the volume to the calibration mark with deionized water.

The step-by-step explanation:

1. Calculate the mass of NiSO₄ needed for a 0.100 M solution in 500.0 mL:
= (0.100 mol/L) x (154.76 g/mol) x (0.500 L) = 7.74 g

2. Weigh out 7.74 g of NiSO₄ using a balance.

3. Add the 7.74 g of NiSO₄ to a clean 500.0 mL volumetric flask.

4. Add deionized water to the volumetric flask, filling it up to the calibration mark. This ensures you have exactly 500.0 mL of solution.

5. Mix the solution thoroughly to ensure the NiSO₄ is completely dissolved in the deionized water.

Thus, 0.100 M NiSO₄ stock solution is prepared that can be used for the calibration of your colorimeter.

To learn more about calibration visit:

https://brainly.com/question/525672

#SPJ11

determine the signs of δh°, δs°, and δg° for the following reaction at 125 °c: h2o(g) ⇄ h2o(ℓ) δh° δs° δg°

Answers

The signs of δh°, δs°, and δg° for the reaction H₂O(g) ⇄ H₂O(ℓ) at 125 °C are -ve, -ve, and +ve, respectively.

The sign of δh° depends on whether the reaction is exothermic or endothermic. The transition from gaseous water to liquid water involves the release of heat, indicating an exothermic reaction. Therefore, the sign of δh° will be negative.

The sign of δs° depends on the change in entropy of the system. The randomness of gaseous molecules is greater than that of liquid molecules; thus, the transition from gaseous water to liquid water involves a decrease in entropy. This indicates a negative sign for δs°.

The sign of δg° depends on the spontaneity of the reaction. A negative δg° indicates that the reaction is spontaneous, while a positive δg° indicates that the reaction is non-spontaneous. At a temperature of 125 °C, the boiling point of water, the reaction will proceed in the direction of the gaseous water, which means the reaction is non-spontaneous in the direction of liquid water. Thus, δg° will be positive.

Therefore, the signs of δh°, δs°, and δg° for the reaction H₂O(g) ⇄ H₂O(ℓ) at 125 °C are -ve, -ve, and +ve, respectively.

To know more about exothermic refer here:

https://brainly.com/question/31214950#

#SPJ11

Calculate the pH of each solution.
A. [H3O+] = 7.7×10−8 M
B. [H3O+] = 4.0×10−7 M
C. [H3O+] = 3.2×10−6 M
D. [H3O+] = 4.4×10−4 M

Answers

The pH values for the solutions are: A: 7.11, B: 6.40, C: 5.49, D: 3.36

The pH scale is a measure of the acidity or basicity of a solution, with pH 7 being neutral, pH less than 7 being acidic, and pH greater than 7 being basic.

In the given formula, [H3O+] represents the concentration of hydronium ions in the solution, which is an indication of the acidity of the solution.

To calculate the pH of each solution, we take the negative logarithm (base 10) of the hydronium ion concentration. The lower the hydronium ion concentration, the higher the pH value, indicating a more basic solution.

Conversely, the higher the hydronium ion concentration, the lower the pH value, indicating a more acidic solution.

To calculate the pH of each solution, we will use the formula:

pH = -log10[H3O+]

A. pH = -log10(7.7×10−8 M) = 7.11
B. pH = -log10(4.0×10−7 M) = 6.40
C. pH = -log10(3.2×10−6 M) = 5.49
D. pH = -log10(4.4×10−4 M) = 3.36

So, the pH values for the solutions are:
A: 7.11
B: 6.40
C: 5.49
D: 3.36

To learn more about solution, refer below:

https://brainly.com/question/30665317

#SPJ11

Which option does NOT demonstrate a
property of heat?
A. A physical substance.
B. The KE of molecules.
C. A form of energy transfer.
D. It is a form of energy. helllllllllppppppp

Answers

The option that does not demonstrate a property of heat is that it is a physical substance (option A).

What is heat?

Heat is the transfer of kinetic energy from one medium or object to another, or from an energy source to a medium or object.

Heat can also refer to the thermal energy transferred between two systems at different temperatures that come in contact.

Heat is a form of energy and not a physical substance. Therefore, the first option is the correct answer.

Learn more about heat at: https://brainly.com/question/25384702

#SPJ1

3. What is the ​molar mass​ of baking soda? Show your work.
4. How many ​moles​ of baking soda does the recipe call for? Show your work.
5. What’s the difference between the ​mass​ of baking soda and the ​moles​ of baking soda? Explain

Answers

The molar mass of baking soda (sodium bicarbonate) is approximately 84.01 g/mol. The recipe calls for a certain number of moles of baking soda, which can be calculated using the molar mass and the given mass of baking soda.

To determine the molar mass of baking soda ([tex]NaHCO_{3}[/tex]), we add up the atomic masses of its constituent elements. The atomic mass of sodium (Na) is approximately 22.99 g/mol, hydrogen (H) is 1.01 g/mol, carbon (C) is 12.01 g/mol, and oxygen (O) is 16.00 g/mol. Adding these masses together:

Molar mass of NaHCO_{3} = (22.99 g/mol) + (1.01 g/mol) + (12.01 g/mol) + (3 * 16.00 g/mol) ≈ 84.01 g/mol

To calculate the number of moles of baking soda required by the recipe, we divide the given mass of baking soda by its molar mass. The mass is not provided in the question, so the calculation cannot be performed without additional information.

The difference between the mass of baking soda and the moles of baking soda lies in their units. Mass is measured in grams (g), while moles represent a quantity of particles. The number of moles is obtained by dividing the mass of the substance by its molar mass. Essentially, moles provide a way to count the number of entities (atoms, molecules) in a given sample, whereas mass represents the total amount of matter present.

Learn more about moles here: https://brainly.com/question/29367909

#SPJ11

rank the following elements in order of increasing ionization energy for cs be k

Answers

The order of increasing ionization energy for Cs, Be, and K is Be < K < Cs. This means that Be has the lowest ionization energy, followed by K, and then Cs has the highest ionization energy.

This is because ionization energy generally increases from left to right across a period and decreases from top to bottom within a group on the periodic table.
You rank the following elements in order of increasing ionization energy: Cs, Be, and K.

Your answer: The order of increasing ionization energy for the elements Cs, Be, and K is Cs < K < Be.

Explanation:
1. Ionization energy is the energy required to remove an electron from an atom or ion.
2. Ionization energy generally increases across a period (left to right) in the periodic table and decreases down a group (top to bottom).
3. Cs is in Group 1 and Period 6, K is in Group 1 and Period 4, and Be is in Group 2 and Period 2.
4. Comparing Cs and K, both are in Group 1 but Cs is below K, so Cs has lower ionization energy.
5. Be is in Group 2 and is to the right of Group 1 elements, so Be has higher ionization energy than both Cs and K.
6. Therefore, the order of increasing ionization energy is Cs < K < Be.

To know more about ionization visit:

https://brainly.com/question/28385102

#SPJ11

report form: mixed aldol conednsations of benzaldehyde and acetone Part A Balanced Equation(s) for Main Reaction(s): mmol compound benzaldehyde MW 106.12 58.08 mg or ml 1.00ml 0.36m1 9.84 4.9 *acetone 40.00 sodium hydroxide 0.025 1000mg 43mg product A Indicate the limiting reagent with an asterisk (*). Product 110oc Observed melting point range: Literature melting point range:- °C Molecular weight of product: Theoretical yield: Grams obtained: % Experimental yield: 8 126 Name: REPORT FORM: MIXED ALDOL CONDENSATIONS OF BENZALDEHYDE AND ACETONE Part B Balanced Equation(s) for Main Reaction(s): mmol compound mg or ml benzaldehyde MW 106.12 58.08 140.00 0.5ml 3.00ml acetone sodium hydroxide 230my 773mg product A Indicate the limiting reagent with an asterisk (*). Product Observed melting-point range: LOC Literature melting-point range: °C Molecular weight of product: Theoretical yield: 8 Grams obtained: Experimental yield: %

Answers

The limiting reagent is acetone, as it is present in the smallest quantity (230 mg). The observed melting-point range of the product is not given, but the literature melting-point range is provided.

The balanced equation for the main reaction in Part A of the mixed aldol condensation of benzaldehyde and acetone is:
2 benzaldehyde + acetone + NaOH → product A
The limiting reagent is benzaldehyde, as it is the one present in the smallest quantity (0.36 mmol). The observed melting point range of the product is 110°C, while the literature melting point range is not provided. The molecular weight of the product is not given either, but the theoretical yield can be calculated by using the limiting reagent (benzaldehyde) and assuming a 100% yield. The theoretical yield is 9.84 mg, but the actual grams obtained and experimental yield are not provided.
In Part B, the balanced equation for the main reaction is:
3 benzaldehyde + 2 acetone + 2 NaOH → product A
The limiting reagent is acetone, as it is present in the smallest quantity (230 mg). The observed melting-point range of the product is not given, but the literature melting-point range is provided. The molecular weight of the product is not provided either, but the theoretical yield can be calculated using the limiting reagent (acetone) and assuming a 100% yield. The theoretical yield is 8 grams, but the actual grams obtained and experimental yield are not provided.

To know more about benzaldehyde visit:

https://brainly.com/question/31684857

#SPJ11

Other Questions
safety: while setting up a micro-boiling point determination you accidently break a capillary tube. you should: Suppose a variable is normally distributed, with mean 248.3 and standard deviation 22.8. A. What is P(200 X 5300)? Select B. What is Plx 2 275)? Select C. What x-values are in the top 10%? I Select Question 15 2 pts Suppose a variable is normally distributed, with mean 248.3 and standard deviation 22.8. A. What is the standard error for a sample of 100? Select] B. What is the probability a sample of 100 will have a sample mean of 240 or less? Select Question 16 3 pts The average weight of an adult male Maine Coon cat is 20 pounds with standard deviation 3.5 pounds. What is the probability an adult male Maine Coon will weigh: A. less than 20 pounds? [ Select B. more than 25 pounds? [ Select C. What are the weights of the heaviest 5% of adult male Maine Coons? [Select Which list shows the compounds in order from most acidic to least acidic? (A) 3>2> 1 (C) 3>1>2 HCC C-H 2 HCO-H 3 H3CHN-H (B) 2>1>3 (D) 1>3>2 Which of the following would be classified as a vascular plant?a. a portobello mushroomb. peat mossc. algaed. a rosebush which conditions should not be present in order for group incentive systems to effectively motivate performance? A. The organizational culture must support group cooperation. B. The group's members must believe they can achieve the objectives. C. There must be group performance measures. D. There must be individual performance measures. Rewrite 36 + 8 using the distributive property with the greatest common factor located in front of the parentheses A logical and probable explanation for the movement of the Earths tectonic plates is:Group of answer choicesa. the breakup of the plates by volcanic eruptions and earthquakesb. the rapid shrinking of Earth's crust as it slowly coolsc. the result of heat convection in the plastic mantle rock which moves the cold brittle crust on topd. the rotation of the Earth causes the plates to drag across the top of the mantle how can one primary mrna result in several polypeptrides with different amino acid sequences? explain the differences among the nominal interest rate, the real interest rate, and the expected real interest rate. which interest is most important to a borrower and lender A bag of pennies weighs 5. 1 kilograms. Each penny weighs 2. 5 grams. About how many pennies are in the bag?A:20B:200C:2,000D:20,000 A thin film of polystyrene of refractive index 1.49 is used as a nonreflecting coating for Fabulite (strontium titanate) of refractive index 2.409.What is the minimum thickness of the film required? Assume that the wavelength of the light in air is 550nm . How many ml is 0.5 g of t-butanol? Simplify the following expression. d/dx integration x^3 8 dp/p^2 d/dx integration x^3 8 dp/p^2 = Summary: How did Deng Xiaoping get started as a leader? (Childhood, anything before his leadership) You need to prepare a solution with a pH of 8, using NaF and HF. What ratio of [base]/[acid] should be used in making the buffer? Please show work1) [base]/[acid] = 2.362) [base]/[acid] = 7.203) [base]/[acid] = 0.144) [base]/[acid] = 4.865) None of the above ratios is correct. An unknown metal with an fcc structure has a density of 10.5 gem, and the edge length of the unit cell is 409 pm. What is the probable identity of the metal? a. Silver (Ag) b. Manganese (Mn) c. Aluminum (Al) d. Samarium (Sm) e. More information is required. 7. Short Answer (show your work) 2. Assume that you are teaching the identification and purpose of commonly used computer hardware to a class of students with minimal computer skills. What pieces of hardware would you select to describe and what information would you give the students regarding this hardware? Carly needed to study for 5/6 of an hour for 9 days. How many hours did she study?A. 9 5/6 hours B. 7 1/2 hoursC. 2 1/7 hoursD. 7 hours Different patterns of urinary sediment may be associated with varying types of glomerulonephritis. The loss of the negative electrical charge across the glomerular filtration membrane and an increase in filtration pore size enhances the movement of proteins into the urine. The type of sediment characterized by the presence of blood and varying degrees of protein in the urine is what is the difference between fragmentation and encapsulation in ipv4? which is more desirable?