plq1. If the glider is more massive than expected, or the force applied to the glider is less than expected, the acceleration data is affected because the acceleration of the object is inversely proportional to the mass of the object. plq2. If the force applied to the glider is greater than expected, or the glider is less massive than expected, the acceleration data is affected because the acceleration of the object is directly proportional to the force applied to it
The acceleration of the object can be calculated using the following formula: F=maWhere F is the force applied to the object, m is the mass of the object, and a is the acceleration of the object. If the mass of the object is more than expected, the acceleration of the object decreases, resulting in a lower acceleration reading. Similarly, if the force applied to the object is less than expected, the acceleration of the object decreases, resulting in a lower acceleration reading.
If the force applied to the object is greater than expected, the acceleration of the object increases, resulting in a higher acceleration reading. Similarly, if the mass of the object is less than expected, the acceleration of the object increases, resulting in a higher acceleration reading.
Learn more about acceleration at:
https://brainly.com/question/28743430
#SPJ11
a 1950 kg oldsmobile traveling east on saginaw street at 15.4 m/s is unable to stop on the ice covered intersection for a red light at abbott road. the car collides with a 3992 kg truck hauling animal feed north on abbott at 9.9 m/s. the two vehicles remain locked together after the impact. calculate the velocity of the wreckage immediately after the impact. give the speed for your first answer and the compass heading for your second answer. (remember, the capa abbreviation for degrees is deg)
The velocity of wreckage immediately after impact = 9.68 m/s and the compass heading is 45 deg (for the second answer).
Mass of 1950 kg Oldsmobile = 1950 kg
Velocity of Oldsmobile = 15.4 m/s
Mass of a truck hauling animal feed = 3992 kg
Velocity of a truck hauling animal feed = 9.9 m/s
Conservation of Momentum Formula Used,
Momentum before collision = Momentum after collision(m1 × v1) + (m2 × v2) = (m1 + m2) × V'
Calculation for Momentum before Collision = (m1 × v1) + (m2 × v2)
Momentum before Collision = (1950 kg × 15.4 m/s) + (3992 kg × 9.9 m/s)
Momentum before Collision = 30129 + 39560.8
Momentum before Collision = 69689.8 kg-m/s
Let V' be the velocity of the wreckage immediately after the impact.
Velocity after Collision is V'
Calculation for Velocity after Collision = (m1 × v1) + (m2 × v2) / (m1 + m2)V'
= (1950 × 15.4) + (3992 × 9.9) / (1950 + 3992)V'
= 57606.8 / 5942V'
= 9.68 m/s
Given, the 1950 kg car was traveling East on Saginaw Street which means the wreckage was moving North-East (45 degrees)
To know more about velocity: https://brainly.com/question/80295
#SPJ11
. Two forces 10N and 20N are inclined at an angle 60° to each other. Find the resultant force by graphic and by mathematical methods. If the two forces are now made to be inclined at 120" to each other, find the magnitude of the new resultant force.
Answer:
Explanation:
Graphic Method:
To solve this problem graphically, you will need to draw a vector diagram. Draw the two forces 10N and 20N as vectors originating from the same point, with the angle between the vectors being 60°. Then, draw the resultant vector that joins the tail of the first vector to the head of the second vector. The magnitude of the resultant vector is the magnitude of the resultant force.
Mathematical Method:
To solve this problem mathematically, you will need to use the law of cosines. The law of cosines states that:
R² = A² + B² - 2ABcosϴ
Where R is the magnitude of the resultant vector, A and B are the magnitudes of the two vectors, and ϴ is the angle between the two vectors.
So, in this case, R² = 10² + 20² - 2(10)(20)cos60°
R² = 100 + 400 - 400cos60°
R² = 500 - 200
R = √300
Therefore, the magnitude of the resultant vector is √300N.
If the two forces are now made to be inclined at 120° to each other, the law of cosines states that:
R² = A² + B² - 2ABcosϴ
Where R is the magnitude of the resultant vector, A and B are the magnitudes of the two vectors, and ϴ is the angle between the two vectors.
So, in this case, R² = 10² + 20² - 2(10)(20)cos120°
R² = 100 + 400 - 400cos120°
R² = 500 + 200
R = √700
Therefore, the magnitude of the new resultant vector is √700N.
all the photons produced in the sun's core have been absorbed by the outer edge of what region of the sun?
The outer edge of the photosphere of the sun is the region where all the photons produced in the sun's core are absorbed. Therefore, the correct option is (C) Photosphere.
What is the Photosphere?The photosphere is the outermost region of the sun's atmosphere that is visible. It is a thin layer of gas that generates the visible light that we see. It is the region of the sun that has the greatest intensity of light and the lowest temperature.
The light that passes through the photosphere of the sun is then absorbed and re-emitted at various wavelengths by the other parts of the sun's atmosphere, such as the chromosphere and corona. Consequently, the photosphere is the only region of the sun that we can directly observe.
What is the core of the sun?The sun's core is the area where the fusion of hydrogen atoms takes place, producing tremendous amounts of energy that are emitted as light and heat. The core of the sun is the primary source of energy for all the planets in the solar system, as well as for life on Earth.
The core of the sun has a temperature of roughly 15 million degrees Celsius and a density of about 150 times that of water. It is shielded from us by the sun's outer layers, making it impossible to see it directly. However, through studying the light and other radiation emitted by the sun, scientists can gain a better understanding of the processes that occur in the sun's core.
Learn more about photosphere: https://brainly.com/question/1168165
#SPJ11
what is the difference between the hybrid orbitals discussed in valence bond theory and the molecular orbitals of mo theory?
VB is presented as a single configuration of electrons in hybrid orbitals, spin paired in bonds, while MO is presented as a single configuration of molecular orbitals arranged in order of increasing energy and filled with electrons in accordance with Hund's rule.
Hund's rule is a principle in quantum mechanics that describes how electrons fill energy levels in an atom. The rule states that when filling subshells of the same energy level, electrons will occupy separate orbitals with parallel spins before they start to pair up. In other words, when there are multiple empty orbitals at the same energy level, electrons will occupy each one singly before pairing up.
Hund's rule is an important concept in many areas of physics, including atomic and molecular physics, solid-state physics, and materials science. It is used to predict the electronic structure and properties of a wide range of systems, from individual atoms to complex molecules and solids.
To learn more about Hund's rule visit here:
brainly.com/question/12646067
#SPJ4
A falling object experiment is performed to determine the acceleration due to gravity on an unknown planet (not the Earth) from photographic data of the falling object.
At time = 0 seconds, the object's displacement is 0 m.
At time = 0.4 seconds, the object's displacement is 1.5 m.
From the above information, calculate the value of the acceleration due to gravity on the unknown planet.
18.75 m/s² is the acceleration brought on by gravity on the unidentified planet.
What type of acceleration does an item have when it falls naturally under the influence of gravity?9.8 m/s2 is the acceleration caused by gravity at or close to the surface of the Earth. The force of gravity causes items to fall towards the ground.
The acceleration brought on by gravity on the unidentified planet may be calculated using the equation of motion for a falling object:
d = 1/2 * g * t²
where d is the object's displacement, g is the acceleration brought on by gravity, and t is the passing of time.
This equation can be changed in order to account for g:
g = 2 * d / t²
Plugging in the given values:
d = 1.5 m
t = 0.4 s
g = 2 * 1.5 m / (0.4 s)²
g = 18.75 m/s²
To know more about acceleration visit:-
https://brainly.com/question/30660316
#SPJ1
How do you find the time constant of an RC circuit?
In summary, the time constant of an RC circuit is the product of the resistance and capacitance, and is a measure of the time taken for the voltage across the capacitor to reach 63.2% of the applied voltage.
The time constant of an RC circuit is the product of the resistance (R) and capacitance (C). To calculate it, you need to multiply the resistance in ohms (Ω) by the capacitance in Farads (F). The result is measured in seconds (s).
For example, for an RC circuit with a resistance of 10 Ω and a capacitance of 0.25 F, the time constant would be 2.5 s (10 Ω × 0.25 F = 2.5 s).
The time constant of an RC circuit is important because it determines how long it takes for the voltage across the capacitor to reach 63.2% of the applied voltage. This is known as the charging time, and it is inversely proportional to the RC time constant.
In an RC circuit, the voltage across the capacitor is initially 0, and increases as time passes. As it increases, the current through the resistor decreases. This is because the capacitor acts as an open circuit in the initial stages, and then gradually allows current to pass as it charges up. After 5 time constants, the voltage across the capacitor reaches almost the same as the voltage of the source.
for such more questions on circuits
https://brainly.com/question/19865219
#SPJ11
water flows through a pipe with a cross-sectional area of 0.002 m2 at a mass flow rate of 4 kg/s. the density of water is 1 000 kg/m3. determine its average velocity. multiple choice question. 0.02 m/s 2 m/s 200 m/s 20 m/s 0.2 m/s
The average velocity of water flowing through a pipe with a cross-sectional area of 0.002 m² at a mass flow rate of 4 kg/s is 2 m/s.
What is the formula for average velocity?The formula for average velocity is:
v = Q / A
Where:
v is the average velocityQ is the volume flow rateA is the cross-sectional area of the pipeThe formula for volume flow rate is:
Q = m / ρ
Where:
m is the mass flow rateρ is the density of the fluidSubstituting the values:
v = Q / Av = (m / ρ) / Av = m / (ρA)Given that the cross-sectional area of the pipe is 0.002 m², the mass flow rate is 4 kg/s, and the density of water is 1000 kg/m³, the average velocity is:
v = 4 / (1000 × 0.002)v = 2 m/sTherefore, the average velocity of water flowing through a pipe with a cross-sectional area of 0.002 m² at a mass flow rate of 4 kg/s is 2 m/s.
Learn more about velocity: https://brainly.com/question/25749514
#SPJ11
Rank these hypothetical moons from oldest to youngest based on their cratering. You can assume the moons have never been volcanically active.-a moon with very few craters-a moon completely covered in craters, old and new-a moon partially covered with craters
We can see the moons should be ranked in the following order from oldest to youngest:
A moon completely covered in craters, old and newA moon partially covered with cratersA moon with very few cratersWhat is a moon?A moon is a natural satellite that orbits a planet. Moons are typically much smaller than their parent planets and are held in orbit by the planet's gravity. They come in a variety of sizes and shapes, and can be composed of a wide range of materials, such as rock, ice, or a mixture of both.
Moons play an important role in our solar system. They help stabilize the orbits of planets, contribute to tidal forces, and may even play a role in the formation and evolution of planets themselves.
Learn more about moon on https://brainly.com/question/12676209
#SPJ1
A 90 kg halfback runs north and is tackled by a 120 kg opponent
running south at 4 m/s. The collision is perfectly inelastic. Just after the
tackle, both players move at a velocity of 2 m/s north. Calculate the
velocity of the 90 kg player just before the tackle
Perfect inelasticity governs the collision. Both athletes go north at a speed of 2 m/s just after the tackle. Prior to the tackle, the 90 kg athlete was moving at a speed of 6 m/s south.
In an inelastic collision, momentum is preserved, hence we may apply the equation: (m1 * v1) plus (m2 * v2) equals (m1 + m2) * vf.
The following is the result of substituting the above values: (90 kg * v1) + (120 kg * (-4 m/s)) = (90 kg + 120 kg) * 2 m/s
When we simplify the equation, we obtain: 90v1 - 480 = 210 90v1 = 690\sv1 = 7.67 m/s They move at a speed of -4 m/s. As a result, the player weighing 90 kg was moving at the following speed right before the tackle: south
Nevertheless, the question specifically asks for the northward velocity shortly before the tackle, therefore we must adjust the sign:
North: v1 = -11.67 m/s plus 2 m/s equals -9.67 m/s
Prior to the tackle, the 90 kg athlete was moving at a speed of 6 m/s south.
learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
Why does hot air move upwards and cold air move downwards?
a) Because hot air is heavier than cold air. B) Because hot air is lighter than cold air. C) Because hot air is denser than cold air. D) Because hot air has less heat than cold air
Answer:
(B) hot air is lighter than cold air
P V = N R T ideal gas equation
If T (temperature) is smaller then N (number of moles) must be larger if other quantities remain constant,
Mass mA rests on a smooth horizontal surface, mB hangs vertically.(a) If mA=11.0 kg and mB=7.0 kg, determine the magnitude of the acceleration of each block.(b) If initially mA is at rest 1.300 m from the edge of the table, how long does it take to reach the edge of the table if the system is allowed to move freely?(c) If mB=1.0 kg, how large must mA be if the acceleration of the system is to be kept at over 1/100 g?
It will take 0.82sec to reach the edge of the table if the system is free to move. If mB=1.0 kg, 99 kg mA must be used if the system's acceleration is to be kept above 1/100 g.
(a) mA = 11 kg
mB = 7 kg
T = mA mB g / (mA+mB) = 77*9.8 / 18 = 41.92 N is the formula for cord tension.
In the case of mA, we have T = mA*a
acceleration of mA, a = T / mA = 41.92 / 11 = 3.81 m/s²
For mB, we have mB*a = mB*g - T a = (mB*g - T) / mB
a = (7*9.8 - 41.92) / 7 = 3.81 m/s²
(b) Initial velocity of mA, u = 0
The distance traveled by mA, s = 1.3 m
We have,
[tex]s = u t + (1/2) a t^2\\ s = at^2 / 2\\ t = (2s / a)^(1/2) = (2*1.3 / 3.81) (1/2) = 0.82 sec[/tex]
(c) mB = 1 kg
The system's acceleration, a = g/100
The system's acceleration is given by the formula a = mB*g / (mA+mB).
mA = [mB*g / a] - mB = [ 1*9.8*100/9.8 ] - 1 = 99 kg
Acceleration is the rate at which velocity changes with respect to time. It is a vector quantity whose magnitude denotes the amount of change in velocity per unit of time.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ4
when a star depletes its core supply of hydrogen and enters the red giant stage, dominates in the core and dominates in the atmosphere.
When a star depletes its core supply of hydrogen and enters the red giant stage, helium dominates in the core, and hydrogen dominates in the atmosphere.
Let's discuss this in detail. Star depletes its core supply of hydrogenWhen a star exhausts its core supply of hydrogen, it begins to convert helium into carbon and oxygen in its core. This process leads to the formation of a heavier core which contracts and increases in temperature. As a result, the temperature of the core increases to the point where it can initiate helium fusion, producing carbon and oxygen. At the same time, the outer shell of the star cools and expands. Dominates in the core and dominates in the atmosphere in the core of a red giant star, helium dominates since this is where helium fusion occurs. The star's atmosphere is, on the other hand, dominated by hydrogen because it is cooler and less dense than the core. The helium-burning phase is shorter than the hydrogen-burning phase in a star's life cycle. When a star enters the red giant phase, it indicates that the core of the star has depleted its hydrogen and is now converting helium to heavier elements. This stage will not last long as the core will continue to contract and heat up, resulting in the production of heavier elements.
Learn more about the red giant stage at brainly.com/question/29992376
#SPJ11
As a mass tied to the end of a string swings from its highest point down to its lowest point, it is acted on by three forces: gravity (F), tension (T), and air resistance (R) HINT (a) Which force does positive work? O Fg O T O R (b) Which force does negative work? O Fg O T O R (c) Which force does zero work? O Fg O T O R
(a) Tension (T) does positive work. (b) Air resistance (R) does negative work. (c) Gravity (Fg) does zero work.
Whenever a mass is hung on a string and is left to swing from its highest point to the lowest point, it experiences three forces, which are tension (T), air resistance (R), and gravity (Fg).The force that does positive work is tension (T). Tension is the force acting on the mass towards the midpoint of its swing. The tension in the string is the force responsible for the work done on the mass during its oscillation from the highest point to the lowest point. When the mass moves in the direction of the tension, the tension does positive work.
The force that does negative work is air resistance (R). Air resistance opposes the motion of the mass, and since the motion of the mass is in the direction of gravity, air resistance does negative work on the mass. The force that does zero work is gravity (Fg). Since the motion of the mass is perpendicular to gravity, gravity does no work on the mass.
Learn more about Air resistance:
https://brainly.com/question/27888011
#SPJ11
A child sleds down a frictionless hill with vertical drop h. At the bottom is a level stretch where the coefficient of friction is 0.27.If she slides 19 m across the level stretch, what's h? Express your answer with the appropriate units.
E = mgh
where m is the mass of the sled, g is the acceleration due to gravity, and h is the height of the hill.
At the bottom of the hill, all of the potential energy has been converted into kinetic energy, which is given by:
E = (1/2)mv^2
where v is the velocity of the sled at the bottom of the hill.
When the sled reaches the level stretch, the kinetic energy is converted into work done by the friction force, which is given by:
W = fd
where f is the friction force and d is the distance traveled across the level stretch.
Setting the potential energy at the top of the hill equal to the work done by the friction force on the level stretch, we have:
mgh = fd
Solving for h, we get:
h = (fd)/(mg)
Substituting the given values, we get:
h = (0.27)(m)(9.8 m/s^2)(19 m)/(m)(9.8 m/s^2)
Simplifying, we get:
h = 5.13 m
Therefore, the height of the hill is 5.13 meters.
Help needed
You are given two waves, a transverse wave that moves to the right f1(x) and a transverse wave that moves to the left f2(x), on a string. As the problem begins, the wave f1(x) is moving to the right at v1 = +1 m/s and the wave f2(x) is moving to the left at v2 = −1 m/s.
wave interferance
At every location along the string, the amplitudes of two waves that interfere with one another are added. The two separate waves combine to form the final wave.
Two transverse waves are present in this instance, one traveling to the right and the other to the left. The waves will interact destructively when they meet since their motions are in opposition.
Transverse wavesThe resultant wave f(x) at any point x on the string may be calculated by summing the two amplitudes if we let f1(x) represent the amplitude of the wave going to the right and f2(x) represent the amplitude of the wave moving to the left:
f(x) = f1(x) + f2(x)
The amplitudes of the two waves will be equal in size and facing in opposite directions when they collide. As a result, the amplitude that results will be zero, and the string will then be at rest.
The resulting wave will alternate between constructive and destructive interference as the waves continue to travel past one another.
As a result, the string will develop a pattern of nodes (points of zero displacements) and antinodes (points of maximum displacement).
The combined frequency and wavelength of the various waves as well as the rate of wave propagation along the string will determine the final wave's frequency and wavelength.
learn more about transverse waves here
https://brainly.com/question/15531840
#SPJ1
write a page note on solar system
Answer:
The eight planets, the sun and the satellites constitute the solar system. Previously, there were nine planets, but Pluto is no longer recognised as a planet now. The sun is at the centre of the solar system, and all eight planets revolve around it. The rotation and revolution of the planets cause the change of the season and day and night.
Paragraph on Solar System in 150 Words
The sun, eight planets, and satellites make up the solar system. Asteroids, comets, dust, small planets, and gas are among the other objects found in space. The Sun, Mercury, Venus, Earth, and Mars make up the inner solar system, whereas the asteroid belt is between Mars and Jupiter’s orbit. According to our knowledge, there are around 500 solar systems in the universe. The outer solar system planets are Jupiter, Saturn, Uranus, and Neptune. The sun is at the centre of the solar system, and the planets revolve around it in their own orbits. The rotation of the planets causes the days and nights, and the changing of seasons is caused by the revolution of the planets around the sun. Our solar system exists in the Milkyway galaxy. According to scientists and astronomers, the earth is the only planetary body where life can exist. But this can be proven wrong after more discoveries about the universe.
Our solar system is unique in that it supports life on its third planet. Children are taught about the solar system in their schools as it is an important part of our lives. In order to write about the solar system, you can refer to the samples provided
Paragraph on Solar System in 100 Words
As per our knowledge, there are approximately 500 solar systems in the universe. The solar system consists of the sun, the eight planets and the satellites. Other than these, there are asteroids, comets, dust, minor planets, and gas. The Sun, Mercury, Venus, Earth and Mars constitute the inner solar system, and the asteroid belt lies between the orbit of Mars and Jupiter. Jupiter, Saturn, Uranus, and Neptune are the outer solar system planets. The rotation of the planets causes the day and night, and the revolution of planets around the sun causes the change of seasons. Our solar system is present in the Milkyway galaxy. As per astronomers and scientists, the earth is the only planetary body that supports life.
Paragraph on Solar System in 150 Words
The sun, eight planets, and satellites make up the solar system. Asteroids, comets, dust, small planets, and gas are among the other objects found in space. The Sun, Mercury, Venus, Earth, and Mars make up the inner solar system, whereas the asteroid belt is between Mars and Jupiter’s orbit. According to our knowledge, there are around 500 solar systems in the universe. The outer solar system planets are Jupiter, Saturn, Uranus, and Neptune. The sun is at the centre of the solar system, and the planets revolve around it in their own orbits. The rotation of the planets causes the days and nights, and the changing of seasons is caused by the revolution of the planets around the sun. Our solar system exists in the Milkyway galaxy. According to scientists and astronomers, the earth is the only planetary body where life can exist. But this can be proven wrong after more discoveries about the universe.
Answer:ok
Explanation:
The eight planets, the sun and the satellites constitute the solar system. Previously, there were nine planets, but Pluto is no longer recognised as a planet now. The sun is at the centre of the solar system, and all eight planets revolve around it. The rotation and revolution of the planets cause the change of the season and day and night.
Paragraph on Solar System in 150 Words
The sun, eight planets, and satellites make up the solar system. Asteroids, comets, dust, small planets, and gas are among the other objects found in space. The Sun, Mercury, Venus, Earth, and Mars make up the inner solar system, whereas the asteroid belt is between Mars and Jupiter’s orbit. According to our knowledge, there are around 500 solar systems in the universe. The outer solar system planets are Jupiter, Saturn, Uranus, and Neptune. The sun is at the centre of the solar system, and the planets revolve around it in their own orbits. The rotation of the planets causes the days and nights, and the changing of seasons is caused by the revolution of the planets around the sun. Our solar system exists in the Milkyway galaxy. According to scientists and astronomers, the earth is the only planetary body where life can exist. But this can be proven wrong after more discoveries about the universe.
Our solar system is unique in that it supports life on its third planet. Children are taught about the solar system in their schools as it is an important part of our lives. In order to write about the solar system, you can refer to the samples provided
Paragraph on Solar System in 100 Words
As per our knowledge, there are approximately 500 solar systems in the universe. The solar system consists of the sun, the eight planets and the satellites. Other than these, there are asteroids, comets, dust, minor planets, and gas. The Sun, Mercury, Venus, Earth and Mars constitute the inner solar system, and the asteroid belt lies between the orbit of Mars and Jupiter. Jupiter, Saturn, Uranus, and Neptune are the outer solar system planets. The rotation of the planets causes the day and night, and the revolution of planets around the sun causes the change of seasons. Our solar system is present in the Milkyway galaxy. As per astronomers and scientists, the earth is the only planetary body that supports life.
a circuit with a ba[ery and a variable resistor is near a loop of wire as shown. when the resistance r is decreased, the induced current in the loop is
The current in the battery increases and the magnetic field generated is stronger, which causes a larger induced current in the wire loop. This current will also be in the opposite direction of the battery current.
A circuit with a battery and a variable resistor near a loop of wire will cause an induced current in the loop when the resistance of the resistor is decreased. This is known as electromagnetic induction, which occurs when the current in the loop of wire changes, generating a changing magnetic field. This magnetic field then causes a current in the nearby wire loop. In this case, when the resistance of the resistor is decreased,
for such more questions on electromagnetic induction
https://brainly.com/question/27613726
#SPJ11
ASTRONOMY!
NASA has discovered several exoplanets that lie in the distance from a star where temperatures could allow for liquid
water to exist on the surface. What is this area referred to as?
the habitable zone
the unhabitable zone
the creature zone
the black zone
Answer:
The habitable zone
Explanation:
The habitable zone is the area around a star where conditions are right for liquid water to exist on a planet's surface.
A current I, is established in a long, straight wire, and a square conducting loop is placed close to the wire, as shown in the figure. The current in the wire creates a current I, in the loop in the direction shown. Which of the following statements could be a correct explanation of how the current is created in the conducting loop? A. The magnetic field generated by the straight wire creates a force on the positive charges in the loop, resulting in the current I2. B. The magnetic field generated by the straight wire creates a force on the negative charges in the loop, resulting in the current I2. C. The magnetic field generated by the straight wire is stronger on the side of the loop closer to the wire, resulting in the current I2. D. I1 is increasing, and the increasing magnetic flux through the loop results in the current I. E. I1 is decreasing, and the decreasing magnetic flux through the loop results in the current I
The closer the loop is to the straight wire, the greater the magnetic field it produces, producing the current I2.
When an infinitely long current-carrying wire is positioned close to a square conducting loop?Since the nearest edge of the square loop and the current in an infinitely long wire both flow upward, there is an attraction between the two objects.
In the event that the current in the straight wire increases, which way will the induced current flow in the loop?The magnetic field created by a straight wire increases along with the current. The loop's flux is expanding and getting stronger. The generated current should only cause internal flux.
To know more about magnetic field visit:-
https://brainly.com/question/11625774
#SPJ1
A ball has a potential energy of 100. J when it is sitting on the top of a hill. At the bottom of the hill it has an energy of 80. 0 J. The work done by friction was
The work done by friction is 20 J.
According to the law of conservation of energy, the total mechanical energy of a system remains constant if no external work is done on the system. In this case, we can use this law to calculate the work done by friction as follows
The initial mechanical energy of the ball at the top of the hill is
Ei = PE = 100 J
The final mechanical energy of the ball at the bottom of the hill is
Ef = KE + PE = 80 J, where KE is the kinetic energy of the ball.
Since the ball is at rest at the top of the hill, its initial kinetic energy is zero. Therefore, the initial and final kinetic energies are
Ei = 0 J
Ef = KE = 80 J
The work done by friction is equal to the difference between the initial and final mechanical energies
Wf = Ei - Ef = 100 J - 80 J = 20 J
Learn more about work done here
brainly.com/question/30280752
#SPJ4
A finite rod of length L has total charge q, distributed uniformly along its length. The rod lies on the x -axis and is centered at the origin. Thus one endpoint is located at (?L/2,0), and the other is located at (L/2,0). Define the electric potential to be zero at an infinite distance away from the rod. Throughout this problem, you may use the constant k in place of the expression 14??0.
Part A (Figure 1) What is VA, the electric potential at point A (see the figure), located a distance d above the midpoint of the rod on the y axis? Express your answer in terms of L, d, q, and k.
Part B What is VB, the electric potential at point B, located at distance d from one end of the rod (on the x axis)? (Figure 2) Give your answer in terms of q, L, d, and k.
The electric potential at point A is [tex]\rm Va= kq/L ln\sqrt{L/2^{2} + d^{2} + L/2 /\sqrt{L/2^{2} + d^{2} - L/2[/tex] and the electric potential at point B is [tex]\rm Vb = kq/L ln (L + d /d)[/tex].
The electric potential at a specific point is the work required to transport a unit of positive charge from a distance of infinite distance to that specific point. SI units of electric potential are volts (V), which can also be expressed as Joules per Coulomb.
Part A) Considering a small length dx of a charge at a distance r from point A and distance x from the vertical axis.
The total charge on the rod of length L is q
The charge on small length dx is
[tex]\rm q = q/L. dx[/tex]
The expression for r can be written using the Pythagoras theorem-
[tex]\rm r = \sqrt{x^{2} + d^{2}[/tex]
The expression for electric potential at A due to charge dq at N.
[tex]\rm dV = kdq/r[/tex]
Substituting the value of dq and r in the above equation we get
[tex]\rm dV = k q/L. dx / \rm\sqrt{x^{2} + d^{2}[/tex]
[tex]\rm dV = kq \times dx/ L\times\sqrt{x^{2} + d^{2} }[/tex]
Integrating this equation we get:
[tex]\rm Va= kq/L ln\sqrt{L/2^{2} + d^{2} + L/2 /\sqrt{L/2^{2} + d^{2} - L/2[/tex]
The equation shows the electric potential at point A.
Part B) In the same way, electric potential Vb at point B is determined
[tex]\rm Vb = kq/L ln (L + d /d)[/tex]
Thus, the potential difference at points A and B is [tex]\rm Va= kq/L ln\sqrt{L/2^{2} + d^{2} + L/2 /\sqrt{L/2^{2} + d^{2} - L/2[/tex] and [tex]\rm Vb = kq/L ln (L + d /d)[/tex] respectively.
To learn more about the electric potential, refer to the link:
https://brainly.com/question/12645463
#SPJ12
The image of the rod in question is attached below.
what is the acceleration of an object flying upward during free fall?
During free fall, an object is subject to the force of gravity and its acceleration is equal to the acceleration due to gravity (g), which is approximately 9.81 meters per second squared (m/s²) near the surface of the Earth.
If an object is flying upward during free fall, its acceleration will still be equal to -9.81 m/s² (note the negative sign indicating that the acceleration is downward). This is because the direction of the acceleration due to gravity is always toward the center of the Earth.
Even if an object is moving upward, it is still subject to the gravitational force, which causes it to decelerate until it reaches its highest point and then starts to fall back down.
To learn more about acceleration refer to:
brainly.com/question/30762941
#SPJ4
When the price of radios decreases 5%, quantity demanded increases 5%. The price elasticity of demand for radios is ________ and total revenue from radio sales will ________.
Price elasticity of demand for radios is 1 and total revenue from radio sales will remain constant.
Price elasticity of demand is calculated as the percentage change in quantity demanded divided by the percentage change in price. Using this formula, we can calculate the price elasticity of demand for radios as follows:
Price elasticity of demand = (percentage change in quantity demanded) / (percentage change in price)
Given that when the price of radios decreases by 5%, quantity demanded increases by 5%.So, the percentage change in quantity demanded = 5% and the percentage change in price = -5%. (Because price has decreased by 5%.)Price elasticity of demand = (5% / -5%) = -1.The negative sign indicates that the demand is elastic. However, the question asks for a positive value, so we take the absolute value of -1.Price elasticity of demand = 1.
Therefore, the price elasticity of demand for radios is 1.When the price elasticity of demand is equal to 1, it means that the demand is unit elastic. This implies that the percentage change in quantity demanded is equal to the percentage change in price. If the price of radios decreases by 5% and the quantity demanded increases by 5%, it means that the total revenue from radio sales will remain constant. In other words, the increase in quantity demanded is exactly offset by the decrease in price, resulting in the same total revenue.
More price elasticity: https://brainly.com/question/22716533
#SPJ11
When a person is involved in a car accident, why is the likelihood of injury greater in a head-on collision as opposed to being hit from behind? Answer using the concepts of relative velocity, momentum, and average force. (Select all that apply. )
1. The change in momentum is greater in the head-on collision.
2. The momentum of the driver relative to the ground is greater in a head-on collision.
3. The velocity of the driver relative to the ground is greater in a head-on collision. 4. The average force on the driver is greater in the head-on collision.
5. The collapse of the crumple zone in the front of the car occurs only in the head-on collision
The proper responses are: The head-on collision results in a bigger change in momentum. In a head-on collision, the driver is subjected to a greater average force.
Explanation: When an automobile collides, the external force acting on it causes a change in the vehicle's momentum. ... a The shift in momentum is greater in a head-on collision because the relative speeds of the two vehicles are higher. This increases the probability of injury because more force is being exerted to the car and its occupants. In addition, due of the shorter duration of impact in a head-on collision, the average force on the driver is higher. in a crash with the back. As a result, there is a higher average force since the force is delivered for a shorter period of time. Although this happens in both head-on and rear-end collisions, the collapse of the crumple zone in the front of the automobile also helps to absorb impact energy. The chance of injury in a collision is not primarily determined by the driver's momentum and velocity in relation to the ground, however they may have an impact on the degree of the injury.
learn more about injury here:
https://brainly.com/question/28450125
#SPJ4
~An AC voltage source with What is the rate of peak Output of 262 V, is connected t0 33-02 energy dissipated due to heat in the resistor? resistor. 2080 W 1040 W C. 520 W D. 1471 W 662 W
The energy dissipated an AC voltage source with peak Output of 262 V due to heat in the resistor is 1471 W.
The rate of peak output voltage from the AC voltage source is 262 V. The energy dissipated due to heat in the resistor can be calculated using the formula P=V²/R, where P is the power (in Watts), V is the voltage (in Volts), and R is the resistance (in Ohms). So, using the values provided, we have:
P = 262²/33.02
P = 1471 W
Therefore, the energy dissipated due to heat in the resistor is 1471 W.
We know that the peak voltage (Vp) of an AC voltage source is given asVp = √2 × VrmsVp = √2 × 262Vp = 371.7V. The voltage across the resistor is given by the peak voltage of the source, which is 371.7V.The resistance of the resistor is 33 ΩWe know that the formula to calculate power (P) is given as P = V² / R Where V is the voltage across the resistor R is the resistance of the resistor. As the power is given, we can find the energy by using the formula:E = P × t Where E is the energy dissipated due to heat in the resistor, P is the power, t is the time.
*Complete question: An AC voltage source with peak Output of 262 V, is connected to a 33-02 resistor. What is the rate of energy dissipated due to heat in the resistor? . 2080 W 1040 W C. 520 W D. 1471 W 662 W
More on energy: https://brainly.com/question/14974753
#SPJ11
A car speeds up at a constant rate pf 4 m/s?. An identical car takes a right turn with 4 m radius at constant speed of 8 m/s. Which of the following statements is correct? A. The car speeding up experiences the greater net force. B. The car speeding up experiences zero net force. C. The car that is turning experiences the greater net force. D. The car that is turning experiences no net force.
The correct answer is the car that is turning experiences no net force.
What is a net force?A net force is the sum of all forces acting on an object, taking into account their magnitude and direction. If an object is not in equilibrium, it experiences a net force, which causes it to accelerate. In physics, a net force, often known as unbalanced force, is defined as the total sum of all forces that act on an object. If the forces acting on an object are balanced, meaning they are the same size but opposite in direction, the object will maintain a constant speed with no acceleration.
In this scenario, the car speeding up experiences the greater acceleration. The car that is turning, on the other hand, experiences no net force since the force acting on the car, the centripetal force, is equal to the force required to maintain its motion.
Therefore, the answer is option D. The car that is turning experiences no net force.
Learn more about net force here:
https://brainly.com/question/14361879
#SPJ11
Based on the equation given in the lab manual, what is the equation to find the equivalent resistance of two resistors in parallel? Note: I do not want inverse resistance, I'm asking for R = ..) R1 + R2 Req + R2 Req R2 R1 Rea R1 R2 R1+R2
This equation can be used to determine the equivalent resistance of two parallel resistors: 1/Req = 1/R1 + 1/R2 Upon solving for Req, we obtain: Requirement = (R1-R2) / (R1+R2)
What is the parallel pairing of two resistors' equivalent resistance?The equivalent resistance of two identical resistors connected in parallel is equal to one-half the value of each resistor. Both share an equal amount of the current.
How are resistance and resistance calculated?Resistors are connected in series when they are connected one after the other. This is seen below. You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner. The following equation is used to accomplish this: Rtotal = R1 + R2 + R3 and so forth.
To know more about resistance visit:-
https://brainly.com/question/13110234
#SPJ1
You rode your 20lb. (9070g) bike to a friend's house, 5km from your house and them returned home a hour later. What is the imperial weight of your bike
The imperial weight of the bike is approximately 20 lbs.
Imperial units, also known as British Imperial System, are a system of units of measurement used in the United Kingdom and its former colonies.
To convert the weight of the bike from metric to imperial units, we can use the following conversion factors
1 kilogram (kg) = 2.20462 pounds (lbs)
1 pound (lb) = 0.453592 kilograms (kg)
So, to find the imperial weight of the bike, we need to convert the weight of the bike from kilograms to pounds:
9070 g = 9070/1000 kg = 9.07 kg
9.07 kg = 9.07 x 2.20462 lbs
= 19.9996 lbs
≈ 20 lbs
Learn more about Imperial weight here
brainly.com/question/850698
#SPJ4
If the 0. 100-mm diameter tungsten filament in a light bulb is to have a resistance of 0. 200 ω at 20. 0oc , how long should it be?
The length is 2.78 mm if the 0. 100-mm diameter tungsten filament in a light bulb is to have a resistance of 0. 200 ω at 20 degrees.
The length tungsten filament is 2.78 mm to have a resistance of 0. 200 ω at 20. degrees.
The given data is as follows:
Diameter of tungsten = 0.100 mm
resistance of tungsten = 0.200ω
The resistance (R) of a conductor is calculated by using the formula,
R = ρ × (L/A)
ρ = resistivity of the material
L = length of the conductor
A = cross-sectional area.
By rearranging the formula to calculate the length,
L = (R × A) / ρ
A = π × r²
A = 3.14 × (5.0 x [tex]10^{-5}[/tex])²
A = 7.85 x [tex]10^{-9}[/tex] m²
The resistivity of tungsten at 20.0°C = 5.6 x [tex]10^{-8}[/tex] Ωm
L = (0.200 × 7.85 x [tex]10^{-9}[/tex]) / (5.6 x [tex]10^{-8}[/tex])
L = 2.78 x [tex]10^{-3}[/tex] m
L = 2.78 mm
Therefore we can conclude that the length is 2.78 mm to have a resistance of 0. 200 ω at 20 degrees.
To learn more about resistance at
https://brainly.com/question/14806080
#SPJ4
a centrifuge in a medical laboratory is rotating at an angular speed of 3600 rev/min. when switched off, it rotates 50 times before coming to rest. find the constant angular deceleration of the centrifuge.
The constant angular deceleration of the centrifuge is 225 rad/s².
Given data:
The initial angular speed of the centrifuge = ω1 = 3600 rev/minThe final angular speed of the centrifuge = ω2 = 0 rev/minThe number of rotations made by the centrifuge after the motor is switched off = N = 50 revolutions.Now, we need to find the constant angular deceleration of the centrifuge.
Since the angular deceleration is constant, we can use the formula of angular displacement:θ = ω1t - (1/2)αt²
Where:
θ = angular displacementω1 = initial angular velocityt = timeα = angular acceleration [constant]Let's calculate the total time taken by the centrifuge to come to rest.Number of revolutions made by the centrifuge after the motor is switched off = N = 50 revolutions.
The time period of one revolution = T = 60 s / 3600 rev. = 1/60 s/rev. The time taken to complete N revolutions = t = N × T = 50 × 1/60 = 5/6 s
Let's plug in the given values in equation (1):0 - 3600(5/6) = (1/2)α(5/6)²
On solving the above equation, we get:
α = 225 rad/s²Therefore, the constant angular deceleration of the centrifuge is 225 rad/s².
Learn more about acceleration: https://brainly.com/question/460763
#SPJ11