Plsssssssssssss answerrrrrrrrrrrrrrrrrrrrrrr

Answer:

Just add what they equal to hope this helps :)

Explanation:

Explanation:

125)118

126)6

127)9

128)Au

There are 118 elements discovered yet and they are included in the periodic table.There are 6 hydrogens in ethanol. Number of total atoms in it is 9. The symbol of gold is Au.

Periodic table is a classification of elements discovered in nature. There are groups and periods for these elements where groups are vertical columns of elements with similar physical and chemical properties.

There are 118 elements in the periodic table. Thus option C is correct.

Ethanol is a simple alcohol formed by 2 carbons and 5 hydrogens with an OH group. Thus there are total 6  (option C) hydrogens and a total of 9 atoms (option C).  Ethanol is widely used in making of alcoholic products.

The chemical symbol of gold is Au. Chemical symbols are elements are derived from their latin names. The latin name of gold is Aurom. Thus it has the symbol Au. Therefore, option B is correct.

To find more about periodic table, refer the link below:

https://brainly.com/question/8832755

#SPJ2

The combination of a hydrogen atom in a molecule and the oxygen atom in another molecule leads to hydrogen bonding. Option D

For hydrogen bond to occur, hydrogen must be bonded to a highly electronegative atoms in a direct covalent linkage. This accounts for the high boiling point of water.

Thus we can say that a hydrogen bond occurred when a hydrogen from one molecule and an oxygen from another molecule. Option D

Learn more about hydrogen bond:https://brainly.com/question/10904296?

#SPJ1

1. The amount of OH¯ present in the solution is 0.1 mol/L

2. The amount of H⁺ present in the solution is 0.0000000000001 mol/L

3. The pH of the solution with H⁺ concentration of 1×10⁻⁴ mol/L is 4

We'll begin by obtaining the pOH of the solution

pH + pOH = 14

13 + pOH = 14

Collect like terms

pOH = 14 - 13

pOH = 1

Finally, we can determine the OH¯

pOH = –Log [OH¯]

1 = –Log [OH¯]

Multiply through by –1

–1 = Log [OH¯]

Take the anti-log of –1

[OH¯] = anti-log of (–1)

[OH¯] = 0.1 mol/L

pH = –Log [H⁺]

13 = –Log [OH¯]

Multiply through by –1

–13 = Log [H⁺]

Take the anti-log of –13

[H⁺] = anti-log of (–13)

[H⁺] = 0.0000000000001 mol/L

pH = –Log [H⁺]

pH = –Log 1×10⁻⁴

pH = 4

Learn more about pH:

https://brainly.com/question/3709867

#SPJ1

The product that is used on the natural nail prior to application to assist in adhesion and serves to chemically bond the enhancement product to the natural nail is known as nail primer.

A nail primer is a chemical agent used in esthetic centers before applying a colored polish to the nails and serves as an adhesive product.

The nail primers are also very useful for improving the cleaning efficiency of the product before its application.

Nail care products include different types of chemical formulations such as, for example, creams that reinvigorate the cuticle.

In conclusion, the chemical formulation employed on the natural nail that is capable of enhancing and also assisting adhesion is called the nail primer.

Learn more about nail esthetic products here:

https://brainly.com/question/14498053

#SPJ1

The composition of a given pure compound is always the same no matter what the source of the compound.

A compound seems to be a substance that is entirely made of one kind of molecule.

Every component of compounds shares the same traits and features because of their homogenous makeup. However, because mixtures are composed of several sorts of chemicals, they frequently differ in terms of content, qualities, and samples.

Therefore, the composition of a given pure compound is always the same no matter what the source of the compound.

To know more about pure compound

https://brainly.com/question/8117196

#SPJ4

Answer:

B₂

Explanation:

The limiting reactant is always a reactant. You can determine which reactant is limiting by identifying which has the smaller mole-to-mole ratio with the product. This ratio can be found via the coefficients of the balanced reaction.

4 A₂ + 3 B₂ ---> 6 AB

4 moles A₂
------------------  = mole-to-mole ratio A₂/AB
6 moles AB

3 moles B₂
------------------  =  mole-to-mole ratio B₂/AB
6 moles AB

Since the mole-to-mole ratio between B₂ and AB is smaller, B₂ must be the limiting reactant.
                           

CH3 is the empirical formula for the compound.

A sample of a compound is determined to have 1.17g of Carbon and 0.287 g of hydrogen.

The number of atom or moles in the compound is

1.17 g C X  1 mol of C / 12.011 g C = 0.097411 mol of C.

0.287 g H x 1 mol of  H / 1 g H = 0.28474 mol H.

This compound contains 0.097411 mol of carbon and 0.28474 mol of Hydrogen.

So we can represent the compound with the formula C0.974H0.284.

Subscripts in formulas can be made into whole numbers by multiplying the smaller subscript by the larger subscript.

we can divide 0.284 by 0.0974.

0.284 / 0.0974 = 3.

So here, Carbon is one and hydrogen is 3.

We can write the above formula as a CH3.

Hence the empirical formula for the sample compound is CH3.

For a detailed study of the empirical formula refer given link https://brainly.com/question/13058832.

#SPJ1.

Green, because it has less volume and less amount of matter.

Density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.

Because it enables us to predict which compounds will float and which will sink in a liquid, density is a crucial notion. If an object's density is lower than the liquid's, it will often float.

The dimensions of two colored cubes.

Red: 4 12

Green: 3 10

density = mass/volume

so compare

[tex]12/4^{3}[/tex] and [tex]10/3^{3}[/tex]

None of the choices is the real reason. But is the closest. It is green because 10/27 > 12/64

But red would have been denser for a side of 3.9, and green would still have had less volume and less matter.

Green, because it has less volume and less amount of matter.

To learn more about density, refer to:

https://brainly.com/question/1354972

#SPJ9

According to Charle's law equation, the volume of a sample of carbon dioxide will be 684.6 mL and the temperature will be 283.60 K.

According to Charles' Law, the volume of a gas container with a certain amount of gas within is precisely proportional to the temperature when the pressure is constant.

[tex]V_{1}[/tex] = 684.6 mL

[tex]V_{2}[/tex] = 933.9 mL

[tex]T_{1}[/tex] = ?

[tex]T_{2}[/tex] = 387 K

Using Charle's law equation

[tex]\frac{684.6}{T_{1} } = \frac{933.9}{387}[/tex]

[tex]T_{1} = \frac{2,64,862.8}{933.9}[/tex]

[tex]T_{1} = 283.60 K[/tex]

According to Charle's law equation, the temperature at 684.6 mL volume was 283.60 K.

For more information about Charle's law equation here

https://brainly.com/question/16927784

#SPJ4

The coordination number for pb will be 12

Four atoms make up each unit cell of the face-centered cubic (fcc), which has a coordination number of 12. Two atoms make up each unit cell of the body-centered cubic (bcc), which has a coordination number of eight.

The number of atoms, ions, or molecules that a central atom or ion in a complex, coordination compound, or crystal holds as its closest neighbours.

Learn more about Coordination number here:

https://brainly.com/question/27289242

#SPJ4

The molarity of the zinc chloride solution will be 0.089 M

Mole of 7.24 g ZnCl2 = 7.24/136.286 = 0.5312 mol

Total volume of water used in preparing the solution = 300 + 300 = 600 mL

Molarity of the solution = mole/volume = 0.5312/0.6 = 0.089 M

The molarity of the zinc chloride solution is, therefore, 0.089 M

More on molarity can be found here: https://brainly.com/question/8732513

#SPJ1

Utilizing wireless communication and camera imagery is the most effective technological solution to this problem.

To find the answer, we need to know more about the wireless communication and camera imagery

Thus, we can conclude that, the wireless connectivity and camera imaging method meet this obstacle.

Learn more about the wireless communication here:

https://brainly.com/question/7022589

#SPJ1

Answer:

.5 gm / ml

Explanation:

Density is defined as   mass/ volume

  so   density of this substance is   5 gm / 10 ml =  .5  gm/ ml

Answer:

best answer is D

Explanation:

if element has even number then protons and neutrons are same but if element has odd number then we should add 1 number in number of protons to know neutrons. but this rule is not work in 4 element that element are argon, nitrogen, hydrogen and one other

The carbon atom reduced in the transformation of chloromethane to methyllithium.

The reaction between chloromethane  and lithium form methyllithium.

[tex]CH_{3} Cl+ 2Li[/tex] → [tex]CH_{3} Li+ LiCl[/tex]

In above reaction, methyllithium is formed by the dispersing of lithium metal and adding chloromethane  .

The carbon atom in chloromethane  is partial positive charge because chlorine is high electronegative atom. The carbon atom in methyllithium is partial negative charge because carbon is more electronegative than lithium.

So, in above reaction two lithium metal donate two electron ( each lithium donate one electron) to the carbon atom(having positive charge) of chloromethane and get negative charge in methyllithium .

The gain of electron is reduction. So,The carbon atom reduced in the transformation of chloromethane to methyllithium.

learn about methyllithium

https://brainly.com/question/15215326

#SPJ4

Answer:

1.28 x 10⁻¹⁵ eV

Explanation:

To find the energy, you can use the photon energy equation:

E = hc / λ

In this equation,

-----> E = energy (eV)

-----> h = Plank's Constant (4.136 x 10⁻¹⁵ eV*s)

-----> c = speed of light (3.00 x 10⁸ m/s)

-----> λ = wavelength (m)

You can find the energy of the photon by plugging the given values into the equation and solving.

E = hc / λ

E = (4.136 x 10⁻¹⁵ eV*s)(3.00 x 10⁸ m/s) / 9.7 x 10⁸ m

E = 1.2408 x 10⁻⁶ / 9.7 x 10⁸ m

E = 1.28 x 10⁻¹⁵ eV

Taking into account the reaction stoichiometry, 3.33 moles of ammonia are produced when 5.0 moles of hydrogen react with excess nitrogen.

In first place, the balanced reaction is:

N₂ + 3 H₂ → 2 NH₃

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The following rule of three can be applied: if by reaction stoichiometry 3 moles of hydrogen form 2 moles of ammonia, 5 moles of hydrogen form how many moles of ammonia?

[tex]moles of ammonia=\frac{5 moles of hydrogenx 2 moles of ammonia}{3 moles of hydrogen}[/tex]

moles of ammonia= 3.33 moles

Finally, 3.33 moles of ammonia are produced when 5.0 moles of hydrogen react with excess nitrogen.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

It is a thermodynamically spontaneous process that means Protein folding occurs. The value of ΔG must be negative in the case of folding but in the case of unfolding, the value of ΔG must be positive.

When the process is thermodynamically spontaneous process results in Protein folding otherwise the process is unfolding.

The value for ΔG must be negative in the case of the folding process and the value for ΔG must be positive in the case of the unfolding process. The value of a thermodynamic parameter for the reverse reaction has an opposite sign but the same value that's why the value for ΔG must be positive and known as unfolding (denaturation) process.

learn more about the folding process: https://brainly.com/question/19247230

#SPJ4

The basis of the difference between the leading and lagging strand is that DNA polymerase can join new nucleotides only to the 3' end of the growing strand.

The leading strand is the new DNA strand that continually extends from 5' to 3'. On the lagging strand, Okazaki fragments develop and are linked by DNA ligase activity. DNA polymerase can only attach new nucleotides to the 3' end of the developing strand, which forms the basis of the distinction between the leading and lagging strands.

Therefore, "DNA polymerase can link additional nucleotides exclusively to the 3' end of the developing strand" is the appropriate response.

Learn more about DNA polymerase here:

https://brainly.com/question/13326597

#SPJ1

The amino acid and which atom which has most to do with myoglobin’s ability to bind o2 is histidine and haemoglobin respectively

Amino acids simply refers to those molecular substances which combine together to form proteins. However, they are the end products of protein digestion

So therefore, the amino acid and which atom which has most to do with myoglobin’s ability to bind o2 is histidine and haemoglobin respectively

Learn more about amino acids:

https://brainly.com/question/1302816

#SPJ1

The statement that identifies an oxidation-reduction reaction is a reaction in which oxidation numbers change (option C).

A redox or oxidation-reduction reaction is a chemical reaction in which some of the atoms have their oxidation number changed.

In a chemical reaction that involves oxidation and reduction, the oxidation number of the involved ions either decreases or increases.

Therefore, the statement that identifies an oxidation-reduction reaction is a reaction in which oxidation numbers change.

Learn more about redox reaction at: https://brainly.com/question/13293425

#SPJ1

Answer:

door

Explanation:

door I guess..................

Answer:

according to the law,the pressure would increase if volume has been decreased.

Explanation:

the reason is that,pressure and volume are inversely proportional,if volume has been decreased that means the pressure would increase because decreased volume would create a sort of compacted situation for particles either of a liquid or gas,decreasing volume would bring these particle together, closer to each other because of decreased  and since the volume has decreased they dont have enough space,they would end up getting closer to each other most likely to collide, which drastically increase pressure .

Energy levels of electrons (n) indicates the distance of the energy level from the nucleus values of n are positive integers n=1 is closest to the nucleus, and lower in energy

Any system which is in bounded state is consider to have negative potential energy and negative total energy.

The energy of the electrons rotating in the energy level is given as,

[tex]E_{n} = - 13.6/n^{2} eV[/tex]

So, on increasing value principle quantum number (n) the energy of the level is become higher.

The first energy level can contain  to 2 electrons , the second energy levels can contain 8 electrons and third energy levels can contain  18 electrons and fourth energy levels can contain  32 electrons

learn about energy levels

https://brainly.com/question/17396431

#SPJ4

Transferred to the lipoamide by an earlier intermediate in the process.

The pyruvate dehydrogenase complex (PDC) is a mitochondrial multienzyme complex composed of three different enzymes

the pyruvate dehydrogenase complex is the bridge between glycolysis and the citric acid cycle

Learn more about Pyruvate dehydrogenase complex here:

https://brainly.com/question/16346028

#SPJ4

The Haber process (a) is used to manufacture ammonia.

The Haber process, which artificially fixes nitrogen, is currently the primary industrial method for producing ammonia.

Using a metal catalyst and high temperatures and pressures, the process turns atmospheric nitrogen (N2) into ammonia (NH3) by reacting with hydrogen (H2).

Haber's reaction is -   N2   +    H2   ------>     NH3

The gases (nitrogen and hydrogen) are passed through four beds of catalyst in this conversion, which is normally carried out at pressures above 10 MPa (100 bar; 1,450 psi) and between 400 and 500 °C (752 and 932 °F). Cooling is applied between each pass to maintain a reasonable equilibrium constant.

Learn more about Haber process -

https://brainly.com/question/21601986

#SPJ4

Excited state configuration are 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹ , [Kr] 5s¹ 4d¹⁰ , [He] 2s¹ 2p⁵and  Ground state configuration are [Ne] 3s²3p³ ,  [Ar] 4s¹ 3d⁶.

The electronic configuration of an element describe the symbolic notation that how electrons are distributed in its atomic orbitals.

The ground state electronic configuration of an element describe the arrangement of an atom at its lowest possible energy state.

Cr has the ground state electronic configuration [Ar] 4s¹ 3d⁶.

Ag has the excited state electronic configuration [Kr] 5s¹ 4d¹⁰ .

Thus from the above conclusion we can say that Excited state configuration are 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹ , [Kr] 5s¹ 4d¹⁰ , [He] 2s¹ 2p⁵and  Ground state configuration are [Ne] 3s²3p³ ,  [Ar] 4s¹ 3d⁶.

Learn more about the Electronic configuration here: https://brainly.com/question/26084288

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: Classify the electron configurations of neutral atoms based on whether they represent an excited state configuration or a ground state configuration.

Excited State                       Ground State

Answer Bank:

1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹

[Ar] 4s¹ 3d⁶

[Ne] 3s²3p³

[He] 2s¹ 2p⁵

[Kr] 5s¹ 4d¹⁰

(1.) Which neutral atom has the excited or ground state electronic configuration, [Ar] 4s¹ 3d⁶ ? Enter the name of the element.

(2.) Which neutral atom has the excited or ground state electronic configuration, [Kr] 5s¹ 4d¹⁰ ? Enter the name of the element

Answer:

0.702 L H₂O

Explanation:

To find the volume of water needed to dilute the stock solution, you need to (1) find the moles of the stock solution (via molarity formula), then (2) find the volume of the diluted solution (via molarity formula), and then (3) find the volume of water needed.

(Step 1)

Molarity (M) = moles / volume (L)                 <----- Molarity formula

5 M = moles / 0.500 L                                  <----- Insert values

2.5 = moles HCl                                           <----- Multiply both sides by 0.500

(Step 2)

Molarity = moles / volume                           <----- Molarity formula

2.08 M = 2.5 moles / volume                      <----- Insert values

(2.08 M) x volume = 2.5 moles                   <----- Multiply both sides by volume

volume = 1.20 L                                           <----- Divide both sides by 2.08

(Step 3)

Diluted Volume = 1.20 L

Stock Volume = 0.500 L

Water Volume = ? L

Diluted Volume = Stock Volume + Water Volume

1.20 L =  0.500 L + Water Volume

0.702 L = Water Volume

Answer:

I'm pretty sure the answer Is c because I think I remember doing something like that so yeah