K2CO3 + 2HNO3 = 2KNO3 + H2CO3. The necessary quantity of n (KNO3) is equal to 2 x n (H2CO3), or 2 x 0.228, or 0.456 mol. This exceeds the amount that is accessible (0.15 mol). KNO3 is the least reactive as a result.
What does the word reactive mean?
reacting to circumstances or events rather than taking proactive measures to influence or prevent them: Unfortunately, rather than taking a proactive approach to the issue of auto theft, the police have taken a reactive one. They only seem to be capable of responding adversely to proposals made by other individuals.
Which of the following describes a reactive chemical?
Explosives, peroxides, water-reactive substances, and pyrophorics are a few examples of extremely reactive chemicals.
To know more about reactive visit:
https://brainly.com/question/1598581
#SPJ1
Etrahedral complexes have a smaller crystal field splitting energy than octahedral complexes.a. Trueb. False
The given statement Etrahedral complexes have a smaller crystal field splitting energy than octahedral complexes is b- False.
In general, tetrahedral complexes have a larger crystal field splitting energy (CFSE) than octahedral complexes. This is because the crystal field splitting in tetrahedral complexes is smaller due to the fact that there are fewer ligands surrounding the central metal ion, resulting in less effective electrostatic interactions between the ligands and the metal ion.
As a result, the d orbitals in tetrahedral complexes are less stabilized and have higher energy compared to octahedral complexes.In octahedral complexes, the six ligands are arranged around the central metal ion in an octahedral geometry, resulting in a high degree of symmetry. The electrostatic interactions between the ligands and the metal ion result in a large crystal field splitting, which causes the d-orbitals to split into two sets of orbitals with different energies.
learn more about crystal field splitting energy HERE:
https://brainly.com/question/29805362
#SPJ11
A 25.0-mL sample of 0.150 M hypochlorous acid, HClO, is titrated with a 0.150 M NaOH solution. What is the pH after 13.3 mL of base is added? The Ka of hypochlorous acid = 3.0 x 10-8.
A. 2.54
B. 7.58
C. 7.46
D. 7.00
E. 7.32
The 25.0 mL sample of the 0.150 M hypochlorous acid, HClO, is titrated with a 0.150 M NaOH solution. The pH after the 13.3 mL of the base is added is 7.58. The correct option is B.
The HClO reacts with NaOH as follows:
HClO + NaOH → H₂O + NaClO
The concentration of NaClO is:
Concentration = 0.150 M / 2
Concentration = 0.075 M
The equilibrium of the NaClO is:
NaClO(aq) + H₂O(l) ⇄ HClO(aq) + OH-(aq)
Where,
The Kb of the reaction = 1.0 x 10⁻¹⁴ / Ka
= 1.0 x 10⁻¹⁴ / 3.0 x 10⁻⁸
= 3.33x10⁻⁷
= [HClO] [OH-] / [NaClO]
The [NaClO] = 0.075 M
The [HClO] = [OH-] = X
3.33x10⁻⁷ = [X] [X] / [0.075M]
2.5 x 10⁻⁸ = X²
X = 1.58 x 10⁻⁴ M = [OH-]
pH = - log (1.58 x 10⁻⁴)
pH = 7.58.
The correct option is B.
To learn more about pH here
https://brainly.com/question/15289714
#SPJ4
Which of the following materials can oxidize copper without oxidizing silver?a) F–b) I–c) I2d) Cr3+
To determine which of the given materials can oxidize copper without oxidizing silver, we need to compare their reduction potentials.
The material with a higher reduction potential will be able to oxidize the material with a lower reduction potential.
Let's analyze each option:
a) F- (fluoride ion): Fluoride ion has a high reduction potential and is a strong oxidizing agent. It is capable of oxidizing copper and can also oxidize silver.
b) I- (iodide ion): Iodide ion has a lower reduction potential than fluoride ion and is a weaker oxidizing agent. It can oxidize copper but does not oxidize silver.
c) I2 (iodine): Iodine can act as an oxidizing agent, but it has a lower reduction potential than fluoride ion. It can oxidize copper but does not oxidize silver.
d) Cr3+ (chromium ion): Chromium ion has a high reduction potential and is a strong oxidizing agent. It can oxidize both copper and silver.
Based on the analysis, the only material that can oxidize copper without oxidizing silver is:
b) I- (iodide ion)
Learn more about reduction potentials here : brainly.com/question/31362624
#SPJ11
How many unpaired electrons would you expect on Vanadium in V2O3 Enter an integer.
Vanadium (V) has an atomic number of 23, which means that it has 23 electrons. To determine the number of unpaired electrons in V2O3, we need to first determine the electron configuration of V in V2O3. There are 2 unpaired electrons on Vanadium in V2O3.
If you're not familiar with electron configurations, here's a brief explanation. Electrons occupy different energy levels (also known as shells or orbitals) around an atom's nucleus. The lowest energy level is filled first before moving on to the next one. The electron configuration of an atom describes how many electrons are in each energy level. For example, V has 23 electrons and its electron configuration is [Ar] 3d3 4s2. This means that there are 2 electrons in the 4s energy level and 3 electrons in the 3d energy level.
In V2O3, the vanadium atoms are in the +3 oxidation state. To determine the number of unpaired electrons, we first need to know the electron configuration of vanadium. The atomic number of vanadium (V) is 23, and its electron configuration is [Ar] 4s2 3d3. When vanadium is in the +3 oxidation state, it loses three electrons. Two electrons are removed from the 4s orbital, and one is removed from the 3d orbital, leaving us with the electron configuration [Ar] 3d2. This means there are two unpaired electrons in the 3d orbital.
To know more about atomic visit:
https://brainly.com/question/30898688
#SPJ11
Calculate the molar concentration of iodide ions in 3. 58 g of CaI2 (s)? dissolved in 100. 0 mL of solution?
The molar concentration of iodide ions is 0.366 M.
To find out the molar concentration of iodide ions in a solution containing 3.58 g of CaI2, we need to calculate the number of moles of CaI2 and then determine the number of moles of iodide ions by multiplying the number of moles of CaI2 by 3. This is because CaI2 completely dissociates into three ions in solution. Once we have determined the number of moles of iodide ions, we can use it to calculate the molar concentration of iodide ions in the solution. To do this, we need to divide the number of moles of iodide ions by the volume of the solution in liters.To calculate the number of moles of CaI2 in 3.58 g, we need to divide the mass of CaI2 by its molar mass. The molar mass of CaI2 is calculated as follows:Molar mass of CaI2= 40.08 + 126.90 × 2= 293.88 g/mol.The number of moles of CaI2 can be calculated as follows:moles= mass/molar mass= 3.58 g/293.88 g/mol= 0.0122 mol.Now, since CaI2 completely dissociates into three ions in solution, the number of moles of iodide ions is 3 × 0.0122 mol= 0.0366 mol.The volume of the solution is 100.0 mL, which is equivalent to 0.1000 L. Therefore, the molar concentration of iodide ions is as follows:0.0366 mol/0.1000 L= 0.366 M.
The number of moles of iodide ions is 0.0366 mol, and the molar concentration of iodide ions is 0.366 M when 3.58 g of CaI2 (s) is dissolved in 100.0 mL of solution.
To know more about molar concentration visit:
brainly.com/question/31981393
#SPJ11
Which pair of ions should form the ionic lattice with the highest energy?
The pair of ions that should form the ionic lattice with the highest energy would depend on the specific ions being considered, and would be the pair with the highest charges and smallest sizes.
The energy of an ionic lattice depends on several factors, including the charge and size of the ions, the distance between the ions, and the crystal structure of the lattice.
Generally, the energy of an ionic lattice increases as the charges of the ions and the number of ions in the lattice increase, and as the distance between the ions decreases.
Therefore, the pair of ions that should form the ionic lattice with the highest energy would be those with the highest charges and the smallest sizes.
Ions with higher charges will have a stronger electrostatic attraction to each other, while smaller ions can get closer to each other, resulting in a stronger interaction.
For example, the ions Mg2+ and O2- have higher charges and smaller sizes compared to the ions Na+ and Cl-, so the lattice formed by Mg2+ and O2- would have a higher energy than the lattice formed by Na+ and Cl-.
Similarly, the ions Ca2+ and F- have higher charges and smaller sizes compared to the ions K+ and Br-, so the lattice formed by Ca2+ and F- would have a higher energy than the lattice formed by K+ and Br-.
Therefore, the pair of ions that should form the ionic lattice with the highest energy would depend on the specific ions being considered, and would be the pair with the highest charges and smallest sizes.
To know more about ionic lattice refer here
https://brainly.com/question/2497050#
#SPJ11
conditional data transfers offer an alternative strategy to conditional control transfers for implementing conditional operations. they can only be used in restricted cases. true false
The given statement "Conditional data transfers offer an alternative to control transfers but are only used in restricted cases" is true. Conditional data transfers offer a different approach to conditional operations compared to conditional control transfers.
While they can provide an alternative strategy, they are only applicable in limited cases.
Conditional data transfers work by evaluating a condition and transferring data based on the result of that evaluation.
This can be useful in situations where conditional branching is not practical, such as in pipelined processors where conditional instructions can cause pipeline stalls.
However, their use is restricted as they are not effective for complex operations and may not be suitable for all architectures.
Therefore, the statement "they can only be used in restricted cases" is true.
For more such questions on data, click on:
https://brainly.com/question/25359197
#SPJ11
True, Conditional data transfers offer an alternative strategy for implementing conditional operations, but their use is restricted to certain cases.
Conditional data transfers can be used as an alternative strategy to conditional control transfers for implementing conditional operations. However, it is true that they can only be used in restricted cases.
In conditional control transfers, a decision is made based on a certain condition, and the control flow is redirected to a different part of the program. Conditional data transfers, on the other hand, transfer data based on a certain condition.
Conditional data transfers are useful in cases where data needs to be transferred between different parts of the program based on a condition. This can be done without the need for conditional control transfers, which can be more complex and difficult to implement.
However, it is important to note that conditional data transfers can only be used in specific cases. They are not always a suitable alternative to conditional control transfers, which may be required in more complex operations.
learn more about data transfers Refer: https://brainly.com/question/29980052
#SPJ11
In order to assess the spontaneity of a chemical reaction or physical process both the change in ________ and ________ associated with the reactions process must be known
In order to assess the spontaneity of a chemical reaction or physical process, both the change in enthalpy (ΔH) and entropy (ΔS) associated with the reaction or process must be known.
The summary of the answer is that to determine if a chemical reaction or physical process is spontaneous, we need to consider the changes in both enthalpy and entropy. Enthalpy (ΔH) refers to the heat energy exchanged during a reaction or process. It represents the difference between the energy of the products and the energy of the reactants. A negative ΔH indicates an exothermic reaction or process, where heat is released, while a positive ΔH indicates an endothermic reaction or process, where heat is absorbed. Entropy (ΔS) is a measure of the disorder or randomness in a system. It represents the change in the number of energetically equivalent microstates available to the system. An increase in entropy (positive ΔS) means an increase in disorder, while a decrease in entropy (negative ΔS) means a decrease in disorder. For a reaction or process to be spontaneous, it generally requires a decrease in enthalpy (ΔH < 0) and/or an increase in entropy (ΔS > 0). This can be determined by evaluating the Gibbs free energy change (ΔG), which combines the effects of enthalpy and entropy (ΔG = ΔH - TΔS, where T is the temperature in Kelvin). If ΔG is negative, the reaction or process is spontaneous. If ΔG is positive, the reaction or process is non-spontaneous.
Learn more about Enthalpy here:
https://brainly.com/question/21369686
#SPJ11
What is the ph at the half-equivalence point in the titration of a weak base with a strong acid? the pkb of the weak base is 8.60.
You asked: What is the pH at the half-equivalence point in the titration of a weak base with a strong acid? The pKb of the weak base is 8.60.
To determine the pH at the half-equivalence point, follow these steps:
1. Calculate the pKa from the given pKb:
pKa = 14 - pKb = 14 - 8.60 = 5.40
2. At the half-equivalence point, the concentration of the weak base is equal to the concentration of its conjugate acid.
This is because half of the weak base has been titrated with the strong acid, forming the conjugate acid.
3. At this point, the pH is equal to the pKa of the weak acid (conjugate acid of the weak base).
So, the pH at the half-equivalence point in the titration of a weak base with a strong acid, with a pKb of 8.60, is 5.40.
To know more about half-equivalence refer here
https://brainly.com/question/13587904#
#SPJ11
given that f(x)=x 1−−−−−√−2x−3, define the function f(x) at x=3 so that it becomes continuous at x=3 .
The function f(x) at x = 3 for given the function f(x) = x√(1 - 2x) - 3 so that it becomes continuous at x = 3 is f(3) = 3√(-5) - 3.
We are given the function f(x) = x√(1 - 2x) - 3, to define the function f(x) at x = 3 so that it becomes continuous at x = 3, you need to find the limit of f(x) as x approaches 3. To have a continuous function, the limit of the function as x approaches 3 should be equal to the value of the function at x = 3.
Let's find the limit of f(x) as x approaches 3:
lim (x -> 3) [x√(1 - 2x) - 3]
Substitute x = 3 into the function:
3√(1 - 2(3)) - 3
3√(1 - 6) - 3
3√(-5) - 3
Now, define the function f(x) at x = 3 to be equal to the limit:
f(3) = 3√(-5) - 3
Therefore, the function f(x) is defined at x = 3 as f(3) = 3√(-5) - 3, making it continuous at x = 3.
Learn more about function f(x): https://brainly.com/question/28887915
#SPJ11
Consider a mixture of the amino acids lysine (pI 9.7) tyrosine (pl 5.7), and glutamic acid (pl 3.2) at a pH 5.7 that is subjected to an electric current. towards the positive electrode(+) A) Lysine B) Tyrosine C) Glutamic acid D) All of the amino acids
The answer to this question is D) All of the amino acids. When subjected to an electric current towards the positive electrode (+) at a pH of 5.7, all three amino acids in the mixture will be affected.
Amino acids are molecules that contain both a carboxyl group (-COOH) and an amino group (-NH2) that can act as both an acid and a base, respectively. At different pH values, these groups can become either positively or negatively charged. The isoelectric point (pI) is the pH at which an amino acid has a net charge of zero.
At a pH of 5.7, all three amino acids in the mixture will have a net positive charge, meaning they will be attracted to the negative electrode (-) and repelled by the positive electrode (+). However, as they move towards the negative electrode (-), they will encounter regions of differing pH values, which can affect their charge and behaviour.
Lysine, with a pI of 9.7, will become increasingly negatively charged as it moves towards the negative electrode (-), causing it to slow down and potentially even reverse direction. Tyrosine, with a pI of 5.7, will remain neutral and unaffected by the electric current. Glutamic acid, with a pI of 3.2, will become increasingly positively charged as it moves towards the negative electrode (-), causing it to accelerate and potentially even reach the electrode.
Overall, the behaviour of the amino acid mixture will be complex and depend on the specific conditions of the electric field and pH gradient. However, all three amino acids will be affected by the electric current in some way.
To learn more about amino acids refer:-
https://brainly.com/question/15687833
#SPJ11
Which one of the following pairs reacts in a 1:1 ratio during a neutralization reaction?
H3PO4 + KOH
HClO4 + Ca(OH)2
H2SO4 + Ba(OH)2
H2SO4 + AL(OH)3
H3PO4 + Ca(OH)2
The pair that reacts in a 1:1 ratio during a neutralization reaction is HClO₄ + Ca(OH)₂.
What combination of compounds results in the formation of a neutral product with an equal stoichiometric ratio?Among the given pairs, the combination of HClO₄ and Ca(OH)₂ reacts in a 1:1 ratio during a neutralization reaction.
The neutralization reaction involves the transfer of protons (H+) from an acid to hydroxide ions (OH-) from a base, resulting in the formation of water and a salt. In the case of HClO₄ + Ca(OH)₂, one molecule of HClO₄ reacts with one molecule of Ca(OH)₂ to produce one molecule of water and one molecule of a calcium salt.
The balanced equation for this reaction is HClO₄ + Ca(OH)₂ → H₂O + Ca(ClO₄)₂. This indicates a 1:1 stoichiometric ratio between the reactants.
Learn more about neutralization reaction
brainly.com/question/27745033
#SPJ11
fill in the blank. type of lipid appearance odor stearic acid fatty acid ____ solid white flakes pungent
Type of lipid appearance odor stearic acid fatty acid Pungent solid white flakes pungent.
Stearic acid is a type of lipid that belongs to the family of saturated fatty acids. It has a straight chain of 18 carbon atoms and is found in many natural sources, such as animal fats and vegetable oils. Stearic acid has a characteristic appearance and odor, which make it easily identifiable.
In terms of appearance, stearic acid is typically found in the form of solid white flakes. These flakes have a waxy texture and are often used in the production of candles, soaps, and other cosmetic products. The solid form of stearic acid is due to its high melting point, which is around 69 degrees Celsius.
In terms of odor, stearic acid has a pungent smell that is often described as fatty or soapy. This odor is due to the chemical structure of stearic acid, which contains a carboxylic acid group. This group is responsible for the acidic odor of stearic acid and also makes it slightly acidic in nature.
Overall, the appearance and odor of stearic acid are important characteristics that make it a valuable ingredient in many industries. Its solid, white flakes are easy to work with and provide a range of functional benefits, while its pungent odor is a useful marker for identifying it in various applications.
For more question on stearic acid visit:
https://brainly.com/question/28303533
#SPJ11
Calculate the concentration of ammonium ion that is required to prevent the precipitation of Ba(OH), in a solution with the following equilibrium concentrations: [Ba +1 0.50 M. [NH,] 0.25 M Ba(OH)2(s)-Ba2 +(aq) + 2 OH-(aq) Ksp-5.0 × 10-3 NH 3(aq, + H2O(het NHt (aq) + OH-(aq) Kb = 1.8 × 10-5 Select the correct answer belowA. 1.8 x 10- M B. 45 x 10M C. 0.25 M D. 0.10 M E. 0.50 M
The concentration of ammonium ion that is required to prevent the precipitation of Ba(OH)2 is 4.5 x 10^-6 M. The correct answer is A. 1.8 x 10^-6 M.
To prevent the precipitation of Ba(OH)2, the concentration of OH- ions in solution should be kept below the value of Ksp/4, where Ksp is the solubility product constant of Ba(OH)2.
Ksp = [Ba2+][OH-]^2 = 5.0 x 10^-3
Ksp/4 = 1.25 x 10^-3
From the equation, we can see that each molecule of Ba(OH)2 dissociates into one Ba2+ ion and two OH- ions. Therefore, the concentration of OH- ions in solution is twice the concentration of Ba(OH)2 that dissolves:
[OH-] = 2[Ba(OH)2] = 2(0.50 M) = 1.00 M
Now we need to calculate the concentration of NH4+ ions required to prevent the precipitation of Ba(OH)2. This can be done by considering the reaction between NH3 and OH- ions, which forms NH4+ and water:
NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq)
The equilibrium constant for this reaction is the base dissociation constant, Kb, which is given as 1.8 x 10^-5. Therefore:
Kb = [NH4+][OH-]/[NH3] = 1.8 x 10^-5
We can rearrange this equation to solve for [NH4+]:
[NH4+] = Kb[NH3]/[OH-] = (1.8 x 10^-5)(0.25 M)/(1.00 M) = 4.5 x 10^-6 M
Therefore,4.5 x 10^-6 M is the concentration of ammonium ion that is required to prevent the precipitation of Ba(OH)2 is 4.5 x 10^-6 M. The correct answer is A. 1.8 x 10^-6 M.
For more questions on equilibrium constant:
https://brainly.com/question/3159758
#SPJ11
The correct answer is D. 0.10 M. To prevent the precipitation of Ba(OH)2, the ion product (Q) of Ba2+ and OH- must be less than the solubility product constant (Ksp) of Ba(OH)2.
From the balanced chemical equation, we can see that for every mole of Ba2+ that reacts, 2 moles of NH4+ are consumed. Thus, the concentration of Ba2+ is 0.50 M, and the concentration of NH4+ is 0.25 M/2 = 0.125 M. To calculate the concentration of OH- in the solution, we need to first calculate the concentration of NH3. Using the equilibrium constant expression for the reaction of NH3 with water, we have:
Kb = [NH4+][OH-]/[NH3] = 1.8 x 10^-5
Since we know the concentration of NH4+ and the initial concentration of NH3 (0.25 M), we can solve for the concentration of OH-:
[OH-] = Kb[NH3]/[NH4+] = (1.8 x 10^-5)(0.25 M)/0.125 M = 3.6 x 10^-5 M
Finally, we can use the ion product expression for Ba(OH)2 to calculate the required concentration of NH4+:
Q = [Ba2+][OH-]^2 = (0.50 M)(3.6 x 10^-5 M)^2 = 6.48 x 10^-11
Since Q is less than Ksp (5.0 x 10^-3), the solution is not saturated with Ba(OH)2 and no precipitation will occur. Therefore, the concentration of NH4+ (0.10 M) is sufficient to prevent the precipitation of Ba(OH)2.
Learn more about Ba(OH)2 here:
https://brainly.com/question/14958132
#SPJ11
a compound has a chemical composition of 47% carbon, 6% hydrogen, and 47% oxygen. what is the empirical formula? luoa
Main Answer:The empirical formula is CH₂O.
Supporting Question and Answer:
How can the empirical formula of a compound be determined based on its chemical composition?
The empirical formula of a compound can be determined by finding the simplest whole-number ratio of the elements present in the compound. To calculate the empirical formula, the percentage composition of each element is converted to grams, then the grams are converted to moles. Finally, the moles of each element are divided by the smallest number of moles to obtain the simplest whole-number ratio.
Body of the Solution: To determine the empirical formula of a compound based on its chemical composition, we need to find the simplest whole-number ratio of the elements present.
Given:
Carbon: 47%
Hydrogen: 6%
Oxygen: 47%
To simplify the percentages, we can assume we have 100 grams of the compound. This means we have:
Carbon: 47 grams
Hydrogen: 6 grams
Oxygen: 47 grams
Next, we need to find the moles of each element. To do this, we divide the mass of each element by its molar mass.
The molar mass of carbon (C) is approximately 12.01 g/mol. The molar mass of hydrogen (H) is approximately 1.01 g/mol. The molar mass of oxygen (O) is approximately 16.00 g/mol.
Now, let's calculate the moles of each element:
Moles of carbon = 47 g C / 12.01 g/mol ≈ 3.916 mol C
Moles of hydrogen = 6 g H / 1.01 g/mol ≈ 5.941 mol H
Moles of oxygen = 47 g O / 16.00 g/mol ≈ 2.938 mol O
To find the simplest whole-number ratio of these moles, we divide each value by the smallest number of moles (in this case, 2.938).
Moles of carbon: 3.916 mol C / 2.938 mol ≈ 1.333 ≈ 4/3 Moles of hydrogen: 5.941 mol H / 2.938 mol ≈ 2.023 ≈ 2
Moles of oxygen: 2.938 mol O / 2.938 mol = 1
Since we need to express the empirical formula with whole numbers, we round the mole ratios to the nearest whole number.
Therefore, the empirical formula of the compound is CH₂O.
Final Answer:Hence, the empirical formula of the compound is CH₂O.
To learn more about the empirical formula of a compound be determined based on its chemical composition from the given link
https://brainly.com/question/1603500
#SPJ4
The empirical formula is CH₂O.
How can the empirical formula of a compound be determined based on its chemical composition?The empirical formula of a compound can be determined by finding the simplest whole-number ratio of the elements present in the compound. To calculate the empirical formula, the percentage composition of each element is converted to grams, then the grams are converted to moles. Finally, the moles of each element are divided by the smallest number of moles to obtain the simplest whole-number ratio.
To determine the empirical formula of a compound based on its chemical composition, we need to find the simplest whole-number ratio of the elements present.
Given:
Carbon: 47%
Hydrogen: 6%
Oxygen: 47%
To simplify the percentages, we can assume we have 100 grams of the compound. This means we have:
Carbon: 47 grams
Hydrogen: 6 grams
Oxygen: 47 grams
Next, we need to find the moles of each element. To do this, we divide the mass of each element by its molar mass.
The molar mass of carbon (C) is approximately 12.01 g/mol. The molar mass of hydrogen (H) is approximately 1.01 g/mol. The molar mass of oxygen (O) is approximately 16.00 g/mol.
Now, let's calculate the moles of each element:
Moles of carbon = 47 g C / 12.01 g/mol ≈ 3.916 mol C
Moles of hydrogen = 6 g H / 1.01 g/mol ≈ 5.941 mol H
Moles of oxygen = 47 g O / 16.00 g/mol ≈ 2.938 mol O
To find the simplest whole-number ratio of these moles, we divide each value by the smallest number of moles (in this case, 2.938).
Moles of carbon: 3.916 mol C / 2.938 mol ≈ 1.333 ≈ 4/3 Moles of hydrogen: 5.941 mol H / 2.938 mol ≈ 2.023 ≈ 2
Moles of oxygen: 2.938 mol O / 2.938 mol = 1
Since we need to express the empirical formula with whole numbers, we round the mole ratios to the nearest whole number.
Therefore, the empirical formula of the compound is CH₂O.
Hence, the empirical formula of the compound is CH₂O.
To learn more about the empirical formula
brainly.com/question/1603500
#SPJ4
20.0 L of a gas evolved in a fermentation reaction. It had a mass of 39.6 grams. The pressure was 1.1 atm. The temperature was 25 degrees C. What is the gas evolved? A. CH4 (g), methane, formula mass 16 amu B.CO2 (g), carbon dioxide, formula mass 44 amu C. H20 (g), water vapor, formula mass 18 amu D. CH3CH2OH (g), ethanol, formula mass 46 amu
The gas evolved in the fermentation reaction whose mass of 39.6 grams. The pressure was 1.1 atm. The temperature was 25 degrees C is B. [tex]CO_{2}[/tex] (g), carbon dioxide, formula mass 44 amu
The ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, we need to convert the given volume of the gas (20.0 L) to the number of moles of gas. We can use the formula n = m/M, where m is the mass of the gas and M is its molar mass. We can calculate the mass per mole of each gas option given, using their respective molar masses:
A. CH4 (g), methane, formula mass 16 amu: 16 g/mol
B. CO2 (g), carbon dioxide, formula mass 44 amu: 44 g/mol
C. H20 (g), water vapor, formula mass 18 amu: 18 g/mol
D. CH3CH2OH (g), ethanol, formula mass 46 amu: 46 g/mol
Using the given mass of the gas (39.6 g), we can calculate the number of moles of the gas, then substitute the values into the ideal gas law to solve for the gas.
n = m/M = 39.6 g / M
P = 1.1 atm
V = 20.0 L
T = 25 + 273.15 = 298.15 K
R = 0.0821 L•atm/mol•K
Substituting these values into the ideal gas law, we get:
(PV)/(RT) = n/M
Solving for M by multiplying both sides by n and dividing by (PV), we get:
M = (nRT)/(PV)
Substituting the given values and solving for M for each option given:
A. M = (nRT)/(PV) = (n0.0821298.15)/(1.120.0) = 16 g/mol
B. M = (nRT)/(PV) = (n0.0821298.15)/(1.120.0) = 44 g/mol
C. M = (nRT)/(PV) = (n0.0821298.15)/(1.120.0) = 18 g/mol
D. M = (nRT)/(PV) = (n0.0821298.15)/(1.120.0) = 46 g/mol
Comparing the calculated molar masses to the given options, we can see that the closest match is option B, [tex]CO_{2}[/tex] (g), with a calculated molar mass of 44 g/mol. Therefore, the gas evolved in the fermentation reaction is likely carbon dioxide. Therefore, Option B is correct.
Know more about Ideal gas law here:
https://brainly.com/question/1056445
#SPJ11
What would the potential of a standard hydrogen electrode (SHE) be if it was under the following conditions?[H+] = 0.68 MPH2 = 2.3 atmT = 298 K
Therefore, the potential of the SHE under the given conditions is -0.160 V.
To calculate the potential of a standard hydrogen electrode (SHE), the Nernst equation is used. The equation is given as E = E° - (RT/nF) lnQ, where E is the potential, E° is the standard potential, R is the gas constant, T is the temperature in Kelvin, n is the number of electrons transferred in the reaction, F is the Faraday constant, and Q is the reaction quotient.
In the case given, the [H+] concentration is 0.68 M, and the partial pressure of H2 is 2.3 atm, at a temperature of 298 K. The standard potential of a SHE is 0 V.
The reaction taking place at the SHE is 2H+ + 2e- → H2. Thus, n is 2.
Using the values given, we can calculate the reaction quotient as Q = [H2]/[H+]^2, where [H2] is the partial pressure of H2. Substituting the values, we get Q = (2.3 atm) / (0.68 M)^2 = 7.75 atm^-1.
Substituting all values into the Nernst equation, we get:
E = 0 - [(8.314 J/mol*K) * 298 K / (2 * 96485 C/mol)] * ln(7.75)
E = -0.160 V
The potential of the standard hydrogen electrode (SHE) under the given conditions of [H+] = 0.68 M, H2 = 2.3 atm, and T = 298 K would be -0.160 V. This is calculated using the Nernst equation, which takes into account the standard potential of the SHE, the temperature, the number of electrons transferred in the reaction, and the reaction quotient. The SHE acts as a reference electrode in electrochemical cells, and its potential is used as a reference point for other electrode potentials.
To know more about standard hydrogen electrode visit:
https://brainly.com/question/31868529
#SPJ11
how many total isomers are possible for a molecule of butene that include double bonds? select the correct answer below: 6 5 4 3
There are a total of six possible isomers for a molecule of butene that includes double bonds. Isomers are compounds with the same molecular formula but different structural arrangements.
In the case of butene, it is a hydrocarbon with four carbon atoms and one double bond. The number of possible isomers can be determined by considering the different ways the carbon atoms can be arranged around the double bond.
In the case of butene, there are two main structural arrangements: cis-butene and trans-butene. Cis-butene has two methyl groups on the same side of the double bond, while trans-butene has methyl groups on opposite sides. These two arrangements can further be classified based on the location of the double bond within the carbon chain.
Considering these factors, the possible isomers for butene are as follows:
1-butene (cis)
2-butene (trans)
2-butene (cis)
2-butene (trans)
1-butene (trans)
1-butene (cis)
Therefore, the correct answer is six isomers for a molecule of butene that includes double bonds.
Learn more about isomers here:
https://brainly.com/question/30465776
#SPJ11
which alkane would have a lower boiling point? ch3ch3 ch3ch2ch3 ch4
The alkane with the lower boiling point is CH₄ (methane).
The boiling point of an alkane depends on its molecular weight and the strength of the intermolecular forces between its molecules. CH₄ has the lowest molecular weight and only has weak London dispersion forces between its molecules, resulting in a low boiling point of -161.5°C.
CH₃CH₃ (ethane) has a slightly higher boiling point of -88.6°C because it has more electrons and a larger surface area for London dispersion forces to act upon.
CH₃CH₂CH₃ (propane) has an even higher boiling point of -42.1°C due to its larger size and greater number of electrons, which result in stronger London dispersion forces. In summary, as the molecular weight and size of the alkane increases, and the number of electrons increases, the boiling point increases due to the stronger intermolecular forces.
Therefore, CH₄ has the lowest boiling point among the given option
Learn more about alkane here:
https://brainly.com/question/31386716
#SPJ11
elaborate on the tire characteristcs that can be used to compare a tire impression with a suspect's tire
Tire characteristics such as size, shape, tread width, depth, and unique features can all be used to compare a tire impression with a suspect's tire.
The size and shape of the tire are important factors in comparing a tire impression, as they can help determine the make and model of the tire. The width of the tread is also important, as it can help determine the type of vehicle that the tire may have come from.
The depth of the tread pattern is another important characteristic, as it can help determine the age and wear of the tire. A newer tire will have a deeper tread than an older tire, and this can be used to narrow down the pool of potential suspects.
Finally, any unique features on the tire surface, such as cuts or nicks, can be used to identify a specific tire. These features may be unique to a particular tire and can be used to tie a suspect to a specific tire impression.
It helps to identify a potential match and narrow down the pool of suspects in a criminal investigation.
For more such questions on tire impression:
https://brainly.com/question/21230945
#SPJ11
Tire characteristics that can be used to compare a tire impression with a suspect's tire include tread pattern, wear, and unique marks or defects. These can be used to determine if the impression was made by a particular tire.
Tread pattern is a key characteristic that can be used to compare tire impressions. Each tire has a unique tread pattern that can be identified through analysis of the impression. Wear patterns can also provide information about the tire, such as its age and usage. Unique marks or defects on the tire, such as cuts or punctures, can also be used to identify a particular tire. By comparing these characteristics with the tire of a suspect vehicle, investigators can determine if the impression was made by that particular tire.
Learn more about suspect's tire here;
https://brainly.com/question/31964519
#SPJ11
HA(aq)+H2O(l)⇄A−(aq)+H3O+(aq)HA(aq)+H2O(l)⇄A−(aq)+H3O+(aq)ΔG°=+35kJ/molrxnΔG°=+35kJ/molrxn
Based on the chemical equation and ΔG° given above, which of the following justifies the claim that HA(aq) is a weak acid?
A) Because ΔG°>>0, Ka>>1 , and HA completely dissociates.
B) Because ΔG°>>0, Ka>>1, and HA almost completely dissociates.
C)Because ΔG°>>0, Ka<<1, and HA only partially dissociates.
D) Because ΔG°>>0, Ka<<1, and HA does not dissociate.
The correct answer is C) Because ΔG°>>0, Ka<<1, and HA only partially dissociates for the chemical equation.
The positive ΔG° value indicates that the reaction is not spontaneous and requires energy to proceed in the forward direction. This suggests that the acid HA is not completely dissociating into its ions A- and H3O+.
Additionally, the Ka value for weak acids is typically less than 1, indicating that the acid only partially dissociates in water. Therefore, the correct option is C for the chemical equation.
When an acid dissolves in water, it only partially dissociates, releasing a small amount of hydrogen ions (H+). Strong acids totally dissociate, but weak acids retain an equilibrium in aqueous solution between their undissociated and dissociated forms. The acid dissociation constant (Ka), which controls the degree of acid ionisation, controls this equilibrium. In comparison to strong acids, weak acids typically contain less hydrogen ions and have less obvious acidic properties. Acetic acid (CH3COOH), citric acid, and carbonic acid (H2CO3) are a few examples of weak acids.
Learn more about chemical equation here:
https://brainly.com/question/31852923
#SPJ11
The solubility of an ionic compound mx (molar mass = 497 g / mol) is 0.401 g / l. what is ksp for this compound? × 10 enter your answer in scientific notation.
The Ksp for the compound MX is approximately 6.5 × 10⁻7.
To determine the Ksp (solubility product constant) of the ionic compound MX, you first need to convert the solubility from grams per liter (g/L) to moles per liter (mol/L).
Solubility in mol/L = (0.401 g/L) / (497 g/mol) = 0.00080644 mol/L
Since the compound MX dissociates into ions M⁺ and X⁻ in a 1:1 ratio, their concentrations are also 0.00080644 mol/L each.
Ksp = [M⁺][X⁻] = (0.00080644)(0.00080644) = 6.5035 × 10⁻7
So, the Ksp for the compound MX is approximately 6.5 × 10⁻7.
To learn more about compound, refer below:
https://brainly.com/question/13516179
#SPJ11
(A) Calculate (in MeV) the binding energy per nucleon for 56Fe. (B) Calculate (in MeV) the binding energy per nucleon for 207Pb.
The binding energy per nucleon for 56Fe is 8.802 MeV/nucleon, and the binding energy per nucleon for 207Pb is 7.861 MeV/nucleon.
The mass of a 56Fe nucleus is 55.934941 u, which is equivalent to 931.502 MeV/c² (using E=mc²). Therefore, the total binding energy of the nucleus will be;
B = (56 nucleons) × (8.794 MeV/nucleon) = 492.864 MeV
The binding energy per nucleon is then;
B/A = 492.864 MeV / 56 nucleons
= 8.802 MeV/nucleon
Therefore, the binding energy is 8.802 MeV.
The mass of a 207Pb nucleus is 206.975896 u, which is equivalent to 3,842.943 MeV/c². Therefore, the total binding energy of the nucleus is;
B = (207 nucleons) × (7.870 MeV/nucleon) = 1,627.049 MeV
The binding energy per nucleon is then;
B/A = 1,627.049 MeV / 207 nucleons
= 7.861 MeV/nucleon
Therefore, the binding energy is 7.861 MeV.
To know more about binding energy here
https://brainly.com/question/31745060
#SPJ4
a solution is made by dissolving 15.84 grams of nacl in enough distilled water to five a final volume of 1.00 l. what is the molarity of the solution ?
The molarity of the NaCl solution is 0.271 M (moles per liter) when 15.84 grams of NaCl is dissolved in 1.00 liter of distilled water.
What is molarity ?Molarity is a concentration unit widely used in chemistry that measures the amount of solute dissolved in a given volume of solvent. It is defined as the number of moles of solute per liter of solution. It provides a quantitative measure of the concentration of a solute in a solution and allows for consistent comparisons between different solutions. It is a fundamental concept in many aspects of chemistry, from laboratory experiments to industrial processes, enabling precise control and understanding of solution compositions.
The molarity of the solution can be calculated by dividing the number of moles of solute (15.84 g of NaCl) by the volume of the solution (1.00 l):
Molarity = (15.84 g NaCl ÷ 58.44 g/mol NaCl) ÷ 1.00 l
Molarity = 0.27 mol/l
To learn more about molarity
https://brainly.com/question/30404105
#SPJ4
3. 12. 0 liters of oxygen are held at STP. If it is heated to 215 °C, what will be the new volume of gas if the pressure is also
increased to 220 atm?
a. 0. 045 L
C. 0. 019 L
b. 0. 098 L
d. 0. 053 L
When 12.0 litres of oxygen at STP (standard temperature and pressure) is heated to [tex]215^0C[/tex] and the pressure is increased to 220 atm, the new volume of gas will be 0.053 L.
According to the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature. To solve this problem, we can use the formula V2 = (P1 x V1 x T2) / (P2 x T1), where V2 is the new volume, P1 is the initial pressure, V1 is the initial volume, T2 is the new temperature, P2 is the final pressure, and T1 is the initial temperature.
At STP, the temperature is [tex]0^0C[/tex], which is equivalent to 273 K. Therefore, the initial temperature is 273 K, and the initial volume is 12.0 L. Given that the new temperature is [tex]215^0C[/tex], which is equivalent to 488 K, and the final pressure is 220 atm, we can substitute these values into the formula to find the new volume:
V2 = (220 atm x 12.0 L x 488 K) / (1 atm x 273 K)
V2 ≈ 0.053 L
Therefore, the new volume of the gas, when heated to [tex]215^0C[/tex] and under a pressure of 220 atm, is approximately 0.053 L.
Learn more about ideal gas laws here:
https://brainly.com/question/12624936
#SPJ11
Find the concentration of Ca2+, in equilibrium with CaSO4(s) and 0. 035 M SO4-2.
A solution contains 0. 0330 M Pb2+and 0. 0210 M Ag+. Can 99% of Pb2+be precipitated by chromate(CrO42-), without precipitating Ag+? What will the concentration of Pb2+be, when Ag2CrO4begins to precipitate?
If a solution containing 0. 015 M each of bromide, chloride, iodide, and thiocyanate, is treated with Cu+, in what order will the anions precipitate?
The concentration of Ca2+ in equilibrium with CaSO4(s) and 0.035 M SO4-2 is approximately 1.41 x 10^-3 M. When a solution containing 0.015 M each of bromide, chloride, iodide, and thiocyanate is treated with Cu+, the order of anion precipitation will be: SCN- (thiocyanate), Br- (bromide), Cl- (chloride), and I- (iodide).
To find the concentration of Ca2+ in equilibrium with CaSO4(s) and 0.035 M SO4-2, we need to use the solubility product constant (Ksp) for CaSO4. The balanced equation for the dissolution of CaSO4 is:
CaSO4(s) ⇌ Ca2+(aq) + SO4-2(aq)
The Ksp expression for CaSO4 is: Ksp = [Ca2+][SO4-2]
Let's assume the concentration of Ca2+ in equilibrium is x. Since CaSO4 is a strong electrolyte, it dissociates completely, so [Ca2+] = x and [SO4-2] = 0.035 M.
Using the Ksp expression, we have: Ksp = (x)(0.035)
Given that the Ksp of CaSO4 is 4.93 x 10^-5, we can solve for x:
4.93 x 10^-5 = x * 0.035
x = 4.93 x 10^-5 / 0.035
x = 1.41 x 10^-3 M
Therefore, the concentration of Ca2+ in equilibrium with CaSO4(s) and 0.035 M SO4-2 is approximately 1.41 x 10^-3 M.
2) To determine if 99% of Pb2+ can be precipitated without precipitating Ag+, we need to compare the solubility products (Ksp) of Pb2CrO4 and Ag2CrO4. The balanced equation for the precipitation reaction of Pb2CrO4 is: Pb2+(aq) + CrO42-(aq) ⇌ PbCrO4(s)
The Ksp expression for PbCrO4 is: Ksp(PbCrO4) = [Pb2+][CrO42-]
Similarly, for Ag2CrO4:
Ag+(aq) + CrO42-(aq) ⇌ Ag2CrO4(s)
Ksp(Ag2CrO4) = [Ag+][CrO42-]
To find if 99% of Pb2+ can be precipitated without precipitating Ag+, we compare the product of [Pb2+] and [CrO42-] with the Ksp(Ag2CrO4) value.
Let's assume the concentration of Pb2+ that can be precipitated is y. Since Pb2CrO4 is a sparingly soluble salt, we can assume that [Pb2+] = y and [CrO42-] = 0.0210 M.
Using the Ksp expression for PbCrO4, we have:
Ksp(PbCrO4) = (y)(0.0210)
Given that the Ksp of PbCrO4 is 1.6 x 10^-13, we can solve for y:
1.6 x 10^-13 = y * 0.0210
y = 1.6 x 10^-13 / 0.0210
y = 7.62 x 10^-12 M
Now we compare the product of [Pb2+] and [CrO42-] with the Ksp(Ag2CrO4) value:
(y)(0.0210) = (7.62 x 10^-12)(0.0210) = 1.60 x 10^-13
Since 1.60 x 10^-13 is smaller than the Ksp(Ag2CrO4) value, which is 1.1 x 10^-12, we can conclude that 99% of Pb2+ can be precipitated without precipitating Ag+.
When Ag2CrO4 begins to precipitate, the concentration of Pb2+ will be equal to the solubility product constant for PbCrO4. Therefore, the concentration of Pb2+ will be 1.6 x 10^-13 M.
3) To determine the order in which the anions precipitate when a solution containing 0.015 M each of bromide (Br-), chloride (Cl-), iodide (I-), and thiocyanate (SCN-) is treated with Cu+, we need to compare the solubility products (Ksp) of the corresponding precipitates.
The order of precipitation will depend on the relative magnitudes of the Ksp values. The lower the Ksp value, the less soluble the compound, and the earlier it will precipitate.
The solubility products (Ksp) for the precipitates are as follows:
CuBr: Ksp = [Cu+][Br-]
CuCl: Ksp = [Cu+][Cl-]
CuI: Ksp = [Cu+][I-]
CuSCN: Ksp = [Cu+][SCN-]
Comparing the Ksp values, we can determine the order of precipitation. The Ksp values for copper halides (CuBr, CuCl, CuI) are generally higher than the Ksp value for copper thiocyanate (CuSCN). Therefore, the order of precipitation will be as follows:CuSCN (thiocyanate) will precipitate first due to its lower Ksp value.
CuBr (bromide) will precipitate second.
CuCl (chloride) will precipitate third.
CuI (iodide) will precipitate last.
In summary, when a solution containing 0.015 M each of bromide, chloride, iodide, and thiocyanate is treated with Cu+, the order of anion precipitation will be: SCN- (thiocyanate), Br- (bromide), Cl- (chloride), and I- (iodide).
LEARN MORE ABOUT precipitation here: brainly.com/question/30904755
#SPJ11
A sample of nitrogen gas occupies 9.20 L at 21°C and 0.959 atm. If the pressure is increased to 1.15 atm at constant temperature, what is the newly occupied volume? (2 marks)
The newly occupied volume is 7.43 L when the pressure is increased to 1.15 atm at constant temperature.
To solve this problem, we can use the combined gas law, which states that the product of pressure and volume is directly proportional to the absolute temperature of a gas. We can write this as P1V1/T1 = P2V2/T2, where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and V2 are the new pressure and volume, respectively, at the same temperature T2.
First, we need to convert the initial temperature of 21°C to Kelvin by adding 273.15, giving us T1 = 294.15 K. Using the given values, we can write:
(0.959 atm)(9.20 L)/(294.15 K) = (1.15 atm)(V2)/(294.15 K)
Solving for V2, we get:
V2 = (0.959 atm)(9.20 L)(294.15 K)/(1.15 atm)(294.15 K) = 7.43 L
For more such questions on volume:
https://brainly.com/question/15861918
#SPJ11
The newly occupied volume of the nitrogen gas will be 7.57 L. This can be calculated using the combined gas law equation, which relates the initial and final pressure and volume of the gas at constant temperature.
Using the combined gas law equation (P1V1/T1) = (P2V2/T2), we can solve for the final volume (V2).
Given P1 = 0.959 atm, V1 = 9.20 L, P2 = 1.15 atm and T1 = T2 (since temperature is constant), we have:
(0.959 atm) x (9.20 L) / (294 K) = (1.15 atm) x (V2) / (294 K)
Solving for V2, we get V2 = (0.959 atm x 9.20 L x 294 K) / (1.15 atm x 294 K) = 7.57 L. Therefore, the newly occupied volume of the nitrogen gas is 7.57 L.
Learn more about occupied volume here;
https://brainly.com/question/3850769
#SPJ11
1. Arrange the gases in order of decreasing density when they are all under STP conditions.
Neon , Helium, Florine, Oxygen
2. Some metals will react with hydrochloric acid to liberate hydrogen gas. The general equation for this reaction is: 2 M(s) + 2x HCl(aq) → 2 MClx(aq) + x H2(g), where x = 1, 2, or 3. In an experiment to determine the molar mass, and therefore the identity, of a reactive metal, a 0.152 g sample of the metal was combined with an excess of 2.0 M HCl(aq). All of the metal was consumed and the hydrogen gas was collected at a pressure of 760 mmHg in a 150 mL vessel at a temperature of 20 oC. If x = 2, what is the metal? (R = 0.08206 atm∙L/mol∙K; 0 oC = 273 K; 1 atm = 760 mmHg). Give the full name of the element (all letters lower case).
3.Calculate the pressure in mmHg of 0.874 g of argon at a temperature of 100 oC, in a 550 mL container. Assume argon behaves as an ideal gas. (R = 0.08206 atm∙L/mol∙K; 0 oC = 273 K; 1 atm = 760 mmHg; atomic mass of argon = 39.95 amu). Give your answer to 3 significant figures.
4.What happens to the volume of an ideal gas inside a balloon if the temperature increases from 25 oC to 100 oC but the pressure and amount of gas remains constant? (0 oC = 273 K).
5.What happens to the volume of an ideal gas if its pressure is tripled and its Kelvin temperature is halved, assuming the moles of gas does not change?
The volume of the gas inside the balloon will increase if the temperature increases from 25 °C to 100 °C while the pressure and amount of gas remain constant. If the pressure of an ideal gas is tripled and its Kelvin temperature is halved while the number of moles of gas remains constant.
1 - Arranging the gases in order of decreasing density at STP:
Fluorine > Oxygen > Neon > Helium
2 - The balanced chemical equation for the reaction is:
[tex]2M(s) + 2HCl(aq) \rightarrow 2MCl_{2}(aq) + H_{2}(g)[/tex]
From the equation, we see that 1 mole of metal reacts with 1 mole of HCl to produce 1 mole of [tex]H_2[/tex]. We can use the ideal gas law to find the number of moles [tex]H_2[/tex] produced:
PV = nRT
n = PV/RT
n = (760 mmHg)(0.150 L)/(0.08206 atm∙L/mol∙K)(293 K)
n = 0.00607 mol
Since 1 mole of metal produces 1 mole of [tex]H_2[/tex], the molar mass of the metal is equal to the mass of the metal sample divided by the number of moles of metal used:
molar mass = (0.152 g) / (0.00607 mol)
molar mass = 25.0 g/mol
The metal with a molar mass of 25.0 g/mol and x = 2 is magnesium (Mg).
To find the pressure of argon at 100 °C, we first need to convert the temperature to Kelvin:
T = 100 oC + 273 = 373 K
3 - Next, we can use the ideal gas law to find the pressure of the gas:
PV = nRT
n = m/M
n = (0.874 g) / (39.95 g/mol)
n = 0.0219 mol
V = 550 mL = 0.550 L
R = 0.08206 atm∙L/mol∙K
P = nRT/V
P = (0.0219 mol)(0.08206 atm∙L/mol∙K)(373 K) / (0.550 L)
P = 1.49 atm
Finally, we can convert the pressure to mmHg:
P = 1.49 atm × (760 mmHg/1 atm) = 1134 mmHg
Therefore, the pressure of argon at 100 °C in a 550 mL container is 1134 mmHg.
4 - According to Charles's law, the volume of an ideal gas is directly proportional to its temperature, assuming constant pressure and amount of gas. Therefore, if the temperature increases from 25 °C to 100 °C while the pressure and amount of gas remain constant, the volume of the gas inside the balloon will increase.
5 - According to the combined gas law, the volume of an ideal gas is inversely proportional to its pressure and directly proportional to its temperature, assuming a constant amount of gas. Therefore, if the pressure of the gas is tripled and its Kelvin temperature is halved while the number of moles of gas remains constant, the volume of the gas will be reduced to one-third of its original value.
To learn more about volume
https://brainly.com/question/31606882
#SPJ4
The isotope Iridium has a nuclear mass of 195 and a nuclear number or 77.
How many neutrons is in this isotope?
Answer: Atomic StructureIridium as 77 protons and 114 neutrons in its nucleus giving it an Atomic Number of 77 and an atomic mass of 192.
Explanation:
What volume of carbon dioxide (molar mass = 44.00 g /mol)(in l) will 13.26 g of antacid made of calcium carbonate (molar mass = 100.09 g /mol) produce
The volume of carbon dioxide produced by 13.26 g of antacid made of calcium carbonate is approximately 2.89 L at standard temperature and pressure (STP).
The volume of carbon dioxide produced by 13.26 g of antacid made of calcium carbonate can be calculated using stoichiometry. The balanced equation for the reaction is:
CaCO3(s) + 2HCl(aq) → CaCl2(aq) + CO2(g) + H2O(l)
From the equation, we can see that one mole of calcium carbonate produces one mole of carbon dioxide. To calculate the number of moles of calcium carbonate in 13.26 g, we divide the mass by the molar mass:
13.26 g / 100.09 g/mol = 0.1324 mol
Therefore, the volume of carbon dioxide produced can be calculated using the ideal gas law:
PV = nRT
Assuming standard temperature and pressure (STP), where T = 273 K and P = 1 atm, we can rearrange the equation to solve for volume:
V = nRT/P
Substituting the values, we get:
V = 0.1324 mol x 0.0821 L atm/mol K x 273 K / 1 atm = 2.89 L
Therefore, 13.26 g of antacid made of calcium carbonate will produce approximately 2.89 L of carbon dioxide at STP.
Know more about antacid here:
https://brainly.com/question/31549097
#SPJ11