Prepare a stock available at home following the procedure you learned in this lesson. Have a picture of the finished product and a narration on how you do it​

Answer:

D I think I’m not for sure

Explanation:

Group of answer choices.

A. higher than the speed of the air beneath it and the pressure on top of the Frisbee is greater than the pressure beneath it.

B. lower than the speed of the air beneath it and the pressure on top of the Frisbee is less than the pressure beneath it.

C. lower than the speed of the air beneath it and the pressure on top of the Frisbee is greater than the pressure beneath it.

D. higher than the speed of the air beneath it and the pressure on top of the Frisbee is less than the pressure beneath it.

Answer:

D. higher than the speed of the air beneath it and the pressure on top of the Frisbee is less than the pressure beneath it.

Explanation:

Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.

Mathematically, it is given by the formula;

[tex] Acceleration = \frac {Net \; force}{mass} [/tex]

When a frisbee flies horizontally through the air, it experiences air above and beneath it. Also, there is a pressure acting on both on top and below the frisbee.

Typically, the air flowing over the top of the frisbee has a speed that is higher than the speed of the air beneath it.

Furthermore, the frisbee is able to remain in flight because the pressure on top of the frisbee is less than the pressure beneath it.

Answer:

C) 40m/s [R]

Explanation:

Given the following data;

Force = 25 N [L]

Mass = 1 kg

Initial velocity = 0 m/s

Velocity = 10 m/s [R]

Time = 2 seconds

To find the final velocity;

First of all, we would determine the acceleration of the object.

Force = mass * acceleration

25 = 1 * acceleration

Acceleration = 25/1

Acceleration = 25 m/s²

Next, we would determine the final velocity by using the first equation of motion;

[tex] V = U + at[/tex]

Where;

V is the final velocity.

U is the initial velocity.

a is the acceleration.

t is the time measured in seconds.

Substituting into the formula, we have;

[tex] V = 0 + 25*2[/tex]

[tex] V = 0 + 50 [/tex]

V = 50 m/s

Final velocity = 50 - 10

Final velocity = 40 m/s [R]

Answer:

θ = 33.54 rad

Explanation:

This is a circular motion exercise

         θ= θ₀ + w₀ t + ½ α t²

suppose that for t = 0 the body is at its initial point θ₀ = 0 and from the graph we see that the initial angular velocity w₀ = -9.0 rad / s

we look for the angular acceleration,

         α = [tex]\frac{\Delta w}{ \Delta t}[/tex]

from the graph taken two points

         α = [tex]\frac{0 - (-9.0)}{3.0 - 0}[/tex]

         α = 3 rad / s²

we substitute in the first equation

            θ = 0 -9 t + ½ 3 t²

the displacement is requested for t = 8.6 s

           θ = = -9  8.6 + 3/2  8.6²

           θ = 33.54 rad

The angular displacement of the wheel from 0 to 8.6s is 33 radians.

Given to us

t = 8.6s

We know acceleration is the ratio of velocity and time, therefore, the slope of the velocity-time graph will give us acceleration, therefore,

At point t=3, ω =  0

At point t = 5, ω = 6

Acceleration = slope of the Velocity-time graph = 3 rad/sec²

Using the equation,

[tex]\theta = \omega_0t+\dfrac{1}{2}\alpha t^2[/tex]

SUbstitute values,

[tex]\theta = (-9.0\times 8.6)+\dfrac{1}{2}(3\times 8.6^2)\\\theta = 33\rm\ radians[/tex]

Hence, the angular displacement of the wheel from 0 to 8.6s is 33 radians.

Learn more about Angular displacement:

https://brainly.com/question/14613604

Answer:

5. 32I

Explanation:

The moment of inertia of a solid sphere about its central axis is given by

I = [tex]\frac{2}{5} MR^2[/tex]            ------------------(i)

Where;

M = mass of the sphere

R = radius of the sphere.

From the question;

Case 1: The aluminum sphere has a radius R and moment of inertia I.

This means that we can substitute these values of R and I into equation (i) and get;

I = [tex]\frac{2}{5} MR^2[/tex]       --------------(ii)

M is the mass of the aluminum sphere and is given by;

M = pV

Where;

p = density of aluminum

V = Volume of the sphere = [tex]\frac{4}{3} \pi R^3[/tex]

=> M = p([tex]\frac{4}{3} \pi R^3[/tex])              --------------------(*)

Case 2: An aluminum sphere with a radius of 2R instead.

Let the moment of inertia in this case be I' and mass be M'

Substituting R = 2R, M = M' and I = I' into equation (i) gives

I' = [tex]\frac{2}{5} M'(2R)^2[/tex]       ------------------(iii)

Where;

M' = pV'

p = density of aluminum

V' = volume of the sphere = [tex]\frac{4}{3} \pi (2R)^3[/tex]

=> M' = p([tex]\frac{4}{3} \pi (2R)^3[/tex])

Rewriting gives;

M' = p([tex]\frac{4}{3} \pi (2)^3(R)^3[/tex])

M' = p([tex]\frac{4}{3} \pi8(R)^3[/tex])

M' = 8p([tex]\frac{4}{3} \pi R^3[/tex])

From equation (*), this can be written as

M' = 8M

Now substitute all necessary values into equation (ii)

I' =  [tex]\frac{2}{5} M'(2R)^2[/tex]  

I' =  [tex]\frac{2}{5} (8M)(2R)^2[/tex]  

I' =  [tex]\frac{2}{5} (8M)(2)^2(R)^2[/tex]  

I' =  [tex]\frac{2}{5} (8M)(4)(R)^2[/tex]

I' =  [tex]\frac{2}{5} (32M)(R)^2[/tex]

I' =  [tex]32[\frac{2}{5}MR^2][/tex]

Comparing with equation (ii)

I' =  [tex]32[I][/tex]

Therefore, the moment of inertia about a central axis of a solid

aluminum sphere of radius 2R is 32I

Answer:

drive reduction theory

Explanation:

I would say that because of all the cars beeping and making A Lot of cachos on the street so that will definitely affect her taking her exam

Theory explains Lori’s behavior is b) Drive-reduction theory

It is based on the idea that  the primary motivation behind all human behavior is to reduce drives . A drive is a state of  discomfort which is triggered by a person's physiology or biological need .

so , she removed discomfort that can happen by the noise outside the classroom in order to maintain student's concentration

correct answer is b) Drive-reduction theory

learn more about  Drive-reduction theory

https://brainly.com/question/3246177?referrer=searchResults

#SPJ2

Answer:

x = 13552.6 m

Explanation:

This is a projectile throwing exercise

Let's start by looking for the time it takes for the pump to reach the ground y = 0

         y = y₀ + v_{oy} t - ½ g t²

as the plane flies horizontally the vertical speed is zero

         0 = y₀ + 0 - ½ g t²

         t = [tex]\sqrt{2y_o/g}[/tex]

         t = [tex]\sqrt{2 \ 10000/9.8}[/tex]

         t = 45.175 s

with this time we can find the distance it travels horizontally

         x = v₀ₓ t

         x = 300 45,175

         x = 13552.6 m

the bomb must be dropped at this distance before hitting the target

Answer:

The speed of the golf ball just after the impact is 73.04 m/s.

Explanation:

Given that,

The mass of golf club, m₁ = 183 g = 0.183 kg

The mass of golf ball, m₂ = 46.6 g = 0.0466 kg

The initial speed of golf club, u₁ = 58.6 m/s

The initial speed of a golf ball, u₂ = 0

The final speeds of club, v₁ = 40 m/s

We need to find the speed of the golf ball just after impact. Using the conservation of momentum to find it.

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\m_1u_1=m_1v_1+m_2v_2\\\\v_2=\dfrac{m_1u_1-m_1v_1}{m_2}\\\\v_2=\dfrac{0.183 (58.6)-0.183(40)}{0.0466 }\\\\=73.04\ m/s[/tex]

So, the speed of the golf ball just after the impact is 73.04 m/s.

Answer:

The time taken by the wave to travel 8 m is 0.19 s .

Explanation:

frequency, f = 70 Hz

Amplitude, A = 5 mm

Wavelength = 0.6 m

The wave speed is given by

wave speed, v = frequency x wavelength

v = 70 x 0.6

v = 42 m/s

Distance, d = 8 m

Let the time taken is t.

So, [tex]t =\frac{d}{v}\\\\t =\frac{8}{42}\\\\t = 0.19 s[/tex]

Answer:

Teh velocity of ball with respect to the ground is 29.2 m/s.

Explanation:

Velocity of car, vc = 25 due m/s east

velocity of ball with respect to car, v(b,c) = 15 m/s due Z axis

Write the velocities in the vector form

[tex]\overrightarrow{v}_{c}=25 \widehat{i}\\\\\overrightarrow{v}_{(b,c)}=15 \widehat{k}[/tex]

The velocity of ball with respect to ground is

[tex]\overrightarrow{v}_{(b,c)}= \overrightarrow{v}_{(b,g)}-\overrightarrow{v}_{(c,g)}\\\\15 \widehat{k} = \overrightarrow{v}_{(b,g)} - 25 \widehat{i}\\\\\overrightarrow{v}_{(b,g)} = 25 \widehat{i} + 15 \widehat{k}\\\\v_{(b,g)}=\sqrt{25^2 + 15^2}=29.2 m/s[/tex]

Answer:

The answer is c

Thermal energy moves within the air from the flames to the marshmallow.

Explanation:

Hope it helps

You sit with friends around a campfire, roasting marshmallows. then the transfer of thermal energy involved in this system is an example of radiation Thermal energy moves within the air from the flames to the marshmallow. Hence option C is correct.

In physics and engineering, the phrase "thermal energy" is thrown around in a lot of different situations. It can relate to a variety of distinct physical notions. Included in this are the internal energy, or enthalpy, of a body of matter and radiation; heat, which is a form of energy transfer (as is thermodynamic work); and the characteristic energy of a degree of freedom in a system described in terms of its microscopic particulate constituents (where T denotes temperature and k denotes the Boltzmann constant.

Hence option C is correct.

To know more about Energy :

https://brainly.com/question/1932868

#SPJ2.

Answer:

a = 5.256 m / s²  with the vertical direction upwards and   T = 1090.8 N

Explanation:

to find the acceleration we must use Newton's second law, in the lowest part of the motion

          T - W = m a

where the acceleration is centripetal

         a = v² / r

let's calculate

         a = 4.51² / 3.87

         a = 5.256 m / s²

As the acceleration is centripetal it is directed towards the center of the circle, which in the lower part coincides with the vertical direction upwards.

Let's find the tension of the rope with the first equation

        T = W + m a

        W = m g

let's calculate

         T = 710 + 710 5.256 / 9.8

         T = 1090.8 N

Answer:

SA = 18.6 * t + 186    total distance traveled by A in time t

SB = 24.4 t                total distance car B must travel to catch car A

SA - SB = 0 = 18.6 t + 186 = 24.4 t

(24.4 - 18.6) t = 186

t = 186 m / 5.8 m/s = 32 s

Check 18.6 * 32 + 186 = 781 m

24.4 * 32 = 781 m

Answer:

30 m

General Formulas and Concepts:

Energy

Gravitational Potential Energy: [tex]\displaystyle U_g = mgh[/tex]

Kinetic Energy: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]

Law of Conservation of Energy

Explanation:

Step 1: Define

Identify variables

[Given] m = 0.8 kg

[Given] g = 10 m/s²

[Given] U = 240 J

[Solve] h

Step 2: Solve for h

Explanation:

Organic compounds essential to human functioning include carbohydrates, lipids, proteins, and nucleotides. These compounds are said to be organic because they contain both carbon and hydrogen. ... Carbohydrate compounds provide essential body fuel.

Answer:

PE = 82.32J

Explanation:

PE = m*g*h

PE = 2.80kg*9.8m/s²*3m

PE = 82.32J

Answer:

[tex]F = 14.2 N[/tex]  

Explanation:

From the question we are told that:

Mass [tex]m=0.15kg[/tex]

Radius [tex]r=0.6[/tex]

Angular Velocity [tex]\omega=2rev/s[/tex]

                            [tex]\omega= =2x2 \pi rad/s=>4 \pi rad/s[/tex]

Generally the equation for Force applied is mathematically given by

 [tex]F =mrw2[/tex]

 [tex]F=0.15*0.6* (4*x3.14^)2[/tex]

 [tex]F = 14.2 N[/tex]    

Answer:

cartilage

Explanation:

Answer:

Cartilage

Explanation:

Correct in AE

Answer:

ultrasonic

Explanation:

they detect the acoustic emission created when a pressured gas expands in a low pressure area through a small orifice(the leak).

Answer:

The induced current is 26.7 mA

Explanation:

Given;

area of the loop, A = 0.078 m²

initial magnetic field, B₁ = 3.8 T

change in the magnetic field strength, dB/dt = 0.24 T/s

The induced emf is calculated as;

[tex]emf = - \frac{d \phi}{dt} \\\\emf = -\frac{dB.A}{dt} \\\\emf = A (\frac{dB}{dt} )\\\\emf = 0.078(0.24)\\\\emf = 0.0187 \ V[/tex]

The resistance of the loop = 0.7 Ω

The induced current is calculated as;

[tex]V = IR\\\\I = \frac{V}{R} = \frac{emf}{R} = \frac{0.0187}{0.7} = 0.0267 \ A = 26.7 \ mA[/tex]

Answer:

Explanation:

Look at the color scheme. That will help you a lot.

The metals are Na Mg and Al. They are colored Blue.

The Non metals are colored yellow.

Seven of the eight entries are taken up by yellow or blue. There is only 1 element left over and that is Si. So it must the metalloid. It has properties of the both the metals and the non metals.

Answer: silicon

Explanation:

xin lỗi không có sơ đồ vui lòng cho biết sơ đồ



Answer:

Use 2>60n to get 19>089

Explanation:

Answer:

Ba đặc trưng sinh lí của âm là độ cao, độ to và âm sắc.

Explanation:

Answer:

Where is the Question?

Explanation:

I am glad to h help you out.

Answer:

Sorry is there any attachments to put with this question, If please publish question properly please so that brainly answerers will know what to answer.

Answer:

b is the correct answer i believe

Explanation:

the strong nuclear force encourages particles to come together so that they can nuetralize, a process the opposite of the electrostatic force of repulsion. This lets the atom stay intact because if the repulsion was more than the nuclear forces strength the atom would lose electrons and slowly decay

Answer:

i believe b

Explanation:

for example, gravity works without directly contacting objects so a field helps visualize how gravity objects without physical interaction

Answer:

Explanation:

giâir

Explanation:

The weight of an object on the surface of the earth is equal to the gravitational force exerted by the earth on the object.

[tex]W=F_G[/tex]

[tex]mg = G \dfrac{mM}{R^2}[/tex]

which gives us an expression for the acceleration due to gravity g as

[tex]g = G\dfrac{M}{R^2}[/tex]

At a height h = R, the radius of a satellite's orbit is 2R. Then the acceleration due to gravity [tex]g_h[/tex] at this height is

[tex]mg_h = G \dfrac{mM}{(2R)^2}= G \dfrac{mM}{4R^2}[/tex]

Simplifying this, we get

[tex]g_h= G \dfrac{M}{4R^2} = \dfrac{1}{4} \left(G \dfrac{M}{R^2} \right) = \dfrac{1}{4}g[/tex]