Python Code to be wriiten:
Will mark as brainliest if correct!
A bunny can hop at most 50 centimetres far. It wants to cross to the other side of the river, but it cannot swim. So the only hope is to hop on the rocks on the river, which are positioned in a straight line. The positions of the rocks are measured from the start location, assuming that the bunny starts at the 0 cm mark. The opposite bank could be treated as a big rock. It is the final rock in the tuple of rocks.

In the Figure below, the rocks are at locations 32, 46, 70, 85, 96, 123, and the opposite riverbank is at location 145.

The bunny will jump as far as it could for each hop. What is the smallest number of jumps it needs to take to reach the other side of the river? For the above example, it needs to make 3 jumps, as shown in the diagram above.

You may assume that there are at most 20 rocks (including the opposite bank).

Write a function rabbit that takes in a tuple representing the locations of the rocks. Your function should return the minimum number of jumps needed, or -1 if it is not possible for the bunny to reach the other side of the river. You may assume that the locations of the rocks in the tuple are valid (bigger than 0) and they are sorted in ascending order.

def rabbit(rocks):
# Fill in your code here

Test Cases:
rabbit((32, 46, 70, 85, 96, 123, 145)) 3
rabbit((40, 70, 150, 160, 180)) -1
rabbit((30, 70, 75, 120, 160, 170, 180, 190, 200, 246, 258)) 7
rabbit((51, 52, 53, 54, 55, 56, 57, 58)) -1
rabbit((50, 51, 101, 102, 152, 153, 203, 204, 254, 255, 305, 306, 356, 357, 407)) 15

Note that in this case, Jackon is using a "dial-up internet line" (Option D)

Dial-up Internet access is a type of Internet access that uses the public switched telephone network's infrastructure to connect to an Internet service provider by calling a phone number on a traditional phone line.

Dial-up The Internet has been available since the 1980s through public providers such as NSFNET-connected institutions. In 1989, the BBC offered Internet connection through Brunel University in the United Kingdom. Pipex in the United Kingdom and Sprint in the United States were the first to commercially provide dial-up in 1992.

Learn more about dial-up internet line:
https://brainly.com/question/3521554
#SPJ1

To find the character that appears the maximum number of times in a given string, you can follow these steps:

1. Initialize an empty dictionary to store the count of each character in the string.

2. Iterate through each character in the string.

3. If the character is already present in the dictionary, increment its count by 1. Otherwise, add the character to the dictionary with a count of 1.

4. After counting the occurrences of each character, find the character(s) with the maximum count.

5. If there is a tie for the maximum count, return the character that appears first in the string.

6. If there is no tie, return the character with the maximum count.

By implementing this algorithm, you can find the desired character efficiently. Remember to consider case sensitivity if required, as uppercase and lowercase letters are treated as distinct characters.

For more such questions on string, click on:

https://brainly.com/question/30392694

#SPJ11

Answer:

A) True

Explanation:

A computer network can share printers and software by using a feature called printer sharing.

Printer sharing allows multiple computers to use a single printer over a network. To share a printer on a network, you need to connect it directly to one of the computers on the network or to a print server that is connected to the network

Answer:

A) True

Explanation:

A computer network can share printers and software by using a feature called printer sharing.

What does printer sharing do?

Printer sharing allows multiple computers to use a single printer over a network. To share a printer on a network, you need to connect it directly to one of the computers on the network or to a print server that is connected to the network

The given program based on the question requirements is given below:

public static void analyzeChar(String text)

{

text = text.toLowerCase();

char [] characters = new char[26];

int [] rep =new int[26];

//populate the array of characters

char ch = 'a';

for (int i =0; i < characters.length; i++)

{

characters[i] = ch;

ch++;

}

itz72

//System.out.println(Arrays.toString(characters));

//System.out.println(Arrays.toString(rep));

//how many times each characters repeats

for (int i =0 ; i < text.length (); i++ )

{

ch = text.charAt(i);

if(ch>= 'a'&& ch<= 'z')

{

rep[(int)(ch-'a')]++;

}

itz72

}

//show the number of repetitions

for (int i = 0; i < rep.length; i++)

{

System.out.println("character" + characters[i] + "reapeats"+ rep[i]);

}

}

itz72

public static void calcNumChar(String text)

{

System.out.println("The number of characters is: " + text.length());

}

public static String getText(String fileName) throws IOException

{

String line = "", allText = "";

//open the file

File file = new File(fileName);

Scanner inputFile = new Scanner(file);

//read the file

while(inputFile.hasNext())

{

line = inputFile.nextLine();

//System.out.println(line);

allText=allText + (" " + line);

}

itz72

//close the file

inputFile.close();

return allText;

}

public static String getFilename()

{

String file;

Scanner kb = new Scanner(System.in);

System.out.print("Enter the name of the file: ");

file = kb.nextLine();

return file;

}

}

This script contains numerous functions that aid in the examination and manipulation of written materials. This program determines the incidence of every letter present in the supplied text, tallies the overall character count, and includes the ability to import text from a file.

Read more about programs here:

https://brainly.com/question/26497128

#SPJ1

Answer:

2.) Forms

4.) Queries

6.) Tables

Explanation:

Image classification using AI involves acquiring labeled or unlabeled images, training a neural network model with these images, extracting features from the images, and classifying them based on those features.

Image classification is a technique used in artificial intelligence (AI) to identify and categorize objects or features in an image. The process of image classification using AI involves several steps, starting with the acquisition of labeled or unlabeled images.

The labeled images are used to train a model, which is a neural network that learns to identify patterns in the images. The neural network uses algorithms to extract features from the images and then classifies them based on those features.

The AI process involves feeding the model with a large number of images to learn from. The model is trained by comparing the features it extracts from the images with known categories, and adjusting the weights of the neurons to improve its accuracy. Once the model is trained, it can be used to classify new images by feeding them through the network, and the output is the predicted category.

For more such questions on  artificial intelligence, click on:

https://brainly.com/question/30073417

#SPJ11

Answer:

vertical and I have a great day of school

Answer:

1.  Adobe Photoshop Mix

2. Adobe Capture

3. Autodesk Sketchbook

4. Adobe Spark Post

5.  Behance: Photography Graphic Design, Illustration

Explanation:

From my research, there are more than 5 different graphic applications for graphic designers that will make your life easier, depending on what you want to achieve, then you select a particular mobile graphic tool.

Answer:

In C++:

#include <iostream>

using namespace std;

int main(){

   int hour; char pkg; float bill = 0;

   cout<<"Package: "; cin>>pkg;

   cout<<"Hour: "; cin>>hour;

   if(hour<=744 && hour >=0){

       switch (pkg) {

           case 'A':

               bill = hour * 9.95;

               if(hour >10){bill = 10 * 9.95 + (hour - 10) * 2;}

           break;

           case 'B':

               bill = hour * 14.5;

               if(hour >10){bill = 20 * 14.5 + (hour - 20) * 1;}

           break;

           case 'C':

               bill = 19.95;

           break;

           default:

               cout << "Package must be A, B or C";}

cout<<"Total Bills: $"<<bill; }

else{ cout<<"Hour must be 0 - 744"; }

return 0;

}

Explanation:

This declares all variables:    int hour; char pkg; float bill=0;

This prompts the user for package type:  cout<<"Package: "; cin>>pkg;

This prompts the user for number of hours:    cout<<"Hour: "; cin>>hour;

This checks if hour is between 0 and 744 (inclusive)

   if(hour<=744 && hour >=0){

If true, the following is executed

A switch statement to check valid input for package

       switch (pkg) {

For 'A' package

           case 'A':

Calculate the bill

               bill = hour * 9.95;

               if(hour >10){bill = 10 * 9.95 + (hour - 10) * 2;}

End of A package:            break;

For 'B' package

           case 'B':

Calculate the bill

               bill = hour * 14.5;

               if(hour >10){bill = 20 * 14.5 + (hour - 20) * 1;}

End of B package:            break;

For C package            

           case 'C':

Calculate bill:                bill = 19.95;

End of C package:            break;

If package is not A, or B or C

           default:

Prompt the user for valid package                cout << "Package must be A, B or C";}

Print total bills: cout<<"Total Bills: $"<<bill; }

If hour is not 0 to 744: else{ cout<<"Hour must be 0 - 744"; }

The way it is written and paired with, is correct.

The actions that can be initiated by the attacker are

Malware is a catch-all term for viruses, trojans, and other damaging computer programs that threat actors use to infect systems and networks and access sensitive data. Malware is software designed to obstruct a computer's regular operation.

The computer that has been infected and joined a botnet must create a network connection to the bot-"Command net's and Control" server. After that, it might take part in whichever attack the control orders.

Therefore, the correct options are:

Learn more about malware:

brainly.com/question/22185332

#SPJ1

Answer:

The types of the itcs can be defined as follows:

Explanation:

It stands for the information and communication technology, which is used to comprises products that are a store, process, pass, transform, replicate or receive digital communications. 

It applies to all technology of interaction, such as the Internet, wireless networks, devices, laptops, middleware, video - conferencing, social media, and other software and services in media, and the four types in which it is used in education can be defined as follows:

(i) networking for education

(ii) Web-based education

(iii) mobile education

(iv) facilities for the classroom

Answer:

its 1 Charles babbage

Explanation:

shjdjdjdjdjdj

Answer:

Si Charles Babbage,

Explanation:

FRS ay isang Ingles na matematiko, pilosopo, imbentor, at inhinyerong mekanikal na nagpanimula ng konsepto ng isang naipoprogramang kompyuter. Nakatanghal ang mga bahagi ng kanyang hindi pa buong mga mekanismo sa Museo ng Agham sa London.

The illustration of the Agile Model in Game Development is expressed below. With it, game developers can efficiently manage risks, respond to player preferences and deliver a high-quality game that meets market demand.

The Agile Model as commonly used in game development, is characterized by its iterative and flexible approach. It focuses on delivering frequent increments of playable content and incorporating feedback throughout the development process.

The Game development teams using Agile work in short sprints typically use two to four weeks long where they plan, develop, test and release small portions of the game. This allows for continuous improvement, adaptability to changes and collaboration between developers, designers, and stakeholders.

Read more about agile model

brainly.com/question/30126132

#SPJ1

Here's a Python code that meets the requirements you mentioned:

python

Copy code

def calculate_totals(CustomerName, ItemCost, Customers, Items):

   # Create an empty array to store the totals for each customer

   total_cost = []

   # Iterate over each customer

   for i in range(Customers):

       # Get the start and end indices of the items for the current customer

       start_index = i * Items

       end_index = start_index + Items

       # Calculate the total cost for the current customer

       customer_total = sum(ItemCost[start_index:end_index])

       # Check if the total cost is at least 1000AED

       if customer_total < 1000:

           print("Total cost for customer", CustomerName[i], "is less than 1000AED.")

       # Calculate the average money spent per product

       average_cost = customer_total / Items

       # Add the customer's total cost to the array

       total_cost.append(customer_total)

       # Print the customer's name, total cost, and average money spent per product

       print("Customer:", CustomerName[i])

       print("Total Cost:", customer_total)

       print("Average Cost per Product:", average_cost)

       print()

   # Return the array of total costs for each customer

   return total_cost

# Example usage:

CustomerName = ["John", "Mary", "David", "Sarah"]

ItemCost = [200, 300, 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300]

Customers = 4

Items = 3

calculate_totals(CustomerName, ItemCost, Customers, Items)

This code takes the CustomerName array and ItemCost array as inputs, along with the number of customers Customers and the number of items per customer Items. It calculates the total cost for each customer, checks if the total is at least 1000AED, calculates the average cost per product, and prints the results for each customer. The totals are stored in the total_cost array, which is then returned by the function.

Learn more about python on:

https://brainly.com/question/30391554

#SPJ1

Answer:

Open source software is free, modifiable, and is able to be redistributed. It is beneficial to those wanting  to customize the software to suit their purposes as it can be easily shared and redistributed.

Here is the correct placement of the options on the image:

NETWORK ISSUES

* faulty cables

 * remove and reinsert cables

* blinking lights

* ensuring that the computer is drawing power from the outlet

* restarting the computer

* network collision

If the network cable is faulty, it can cause network issues. To fix this, remove and reinsert the cable.

If the network lights on your computer or router are blinking, it can indicate a problem with the network connection. To fix this, check the cables and make sure that they are properly plugged in.

Ensuring that the computer is drawing power from the outlet: If the computer is not drawing power from the outlet, it will not be able to connect to the network. To fix this, make sure that the power cord is plugged in properly.

Learn more about network on

https://brainly.com/question/1326000

#SPJ1

Answer:

CPU IS TH ANSWER BECAUSE IT IS OUT

Answer:

Explanation:

Well I am sorry I don't know the answer anyway.

Answer:

= {(1, x, 3), (1, x, 4), (1, y, 3), (1, y, 4), (1, z, 3), (1, z, 4), (2, x, 3), (2, x, 4), (2, y, 3), (2, y, 4), (2, z, 3), (2, z, 4)}

Explanation:

A(1,2)

B(x,y,z)

C=(3,4)

Find : A X B X C

= (1, 2) X ( x, y, z) X (3, 4)

= {(1, x), (1, y), (1, z), (2, x), (2, y), (2, z)} × (3, 4)

= {(1, x, 3), (1, x, 4), (1, y, 3), (1, y, 4), (1, z, 3), (1, z, 4), (2, x, 3), (2, x, 4), (2, y, 3), (2, y, 4), (2, z, 3), (2, z, 4)}

Explanation:

A function is a predefined formula that performs calculations using specific values in a particular order. All spreadsheet programs include common functions that can be used for quickly finding the sum, average, count, maximum value, and minimum value for a range of cells. In order to use functions correctly, you'll need to understand the different parts of a function and how to create arguments to calculate values and cell references.

Answer:

The appropriate answer is "Distributed system".

Explanation:

Answer:

1. Mouse

2.Graphic Tablet

3.Keyboard

Explanation:

1. A computer mouse (plural mice, rarely mouses) is a hand-held pointing device that detects two-dimensional motion relative to a surface. This motion is typically translated into the motion of a pointer on a display, which allows a smooth control of the graphical user interface of a computer.

2.Graphic tablets, because of their stylus-based interface and ability to detect some or all of pressure, tilt, and other attributes of the stylus and its interaction with the tablet, are widely considered to offer a very natural way to create computer graphics, especially two-dimensional computer graphics

3.A keyboard is for putting information including letters, words and numbers into your computer. You press the individual buttons on the keyboard when you type. The number keys across the top of the keyboard are also found on the right of the keyboard. The letter keys are in the centre of the keyboard.

Answer:

Provide a descriptive document file name and title

A unique, descriptive file name helps individuals understand the general topic of a document. Include similar information when writing the title of the document, and apply appropriate punctuation, e.g., no underscores.

Explanation:

Please give thanks to all my answers and please mark as brilliant and please follow me

The most effective way to present information in a table is when you want to make many details available in an organized way. (Option B)

Tables are database objects that hold all of the information in a database. Tables logically arrange data in a row-and-column structure comparable to spreadsheets. Each row represents a distinct record, and each column represents a record field.

A table in Excel is a rectangular range of data that has been defined and designated in a certain way. To demonstrate, consider the following two rectangular data ranges. Both ranges contain identical data, but neither has been classified as a table.

Learn more about table  at:

https://brainly.com/question/12151322

#SPJ1

Cyber surveillance refers to how technology is used to observe people's internet activity.

The utilization of technology to observe and regulate individuals' online behavior, commonly for the purpose of restricting or inhibiting access to particular data, is known as cyber surveillance.

The process of gathering, examining, and storing electronic data enables influential bodies or authorities to monitor people's cyber activities, govern entrance to particular websites or channels, and alter or screen content.

The extensive surveillance and regulation measures can violate privacy and compromise freedom of speech, leading to apprehensions about misuse of authority and suppression of open communication and information exchange in the era of technology.

Read more about Cyber surveillance here:

https://brainly.com/question/31000176

#SPJ1

Bill is replacing a worn-cut cable for his power table saw.  is using is A. PSC (Portable Cord).

Working with frayed cables can be dangerous and may act as a form of a risk of electric shock or other hazards. To make a safe and successful cable replacement, there are some general steps Bill can follow.

A is the most probable  type of cable he is utilizing from the provided choices. A type of cord that can be easily carried or moved around. Flexible and durable, portable cords are frequently utilized for portable power tools and equipment.

Learn more about bills from

https://brainly.com/question/29550065

#SPJ1

Practice with examples is the most effective way to learn C++. Examples on fundamental C++ ideas can be found on this page. It is encouraged that you use the examples as references and test the concepts on your own and Programme.

Thus, All of the programs on this page have been tested, so they should all run well.

Examining a ton of sample programs is one of the finest ways to learn how to program in a new language. It is recommended to copy and paste each of the programs listed below into a text file before compiling them.

Try the experiments after that. You will become more familiar with various C++ features by expanding these example programs, and you'll feel more at ease when it comes time to build programs from scratch.

Thus, Practice with examples is the most effective way to learn C++. Examples on fundamental C++ ideas can be found on this page. It is encouraged that you use the examples as references and test the concepts on your own and Programme.

Learn more about Programe, refer to the link:

https://brainly.com/question/14368396

#SPJ1

The output print(‘You are’, age, ‘years old.’) function is a useful tool for programmers looking to display a person's age as part of a string of text. It is a straightforward function that can be easily incorporated into a variety of Python programs.

The outputprint(‘You are’, age, ‘years old.’) is a Python function that outputs a string of text that includes the variable ‘age’. The function prints the phrase ‘You are’, followed by the value of the variable ‘age’, and ends with the phrase ‘years old.’ For example, if the variable ‘age’ is assigned the value of 25, then the output of the function would be ‘You are 25 years old.’

This function is commonly used in programs that involve age calculations or when displaying a person's age. It is a simple way to incorporate the value of a variable into a text string and output it to the console or screen.

For more such questions on Python function, click on:

https://brainly.com/question/25755578

#SPJ11