Question 3
This table shows a linear relationship between the amount of water in a tank and time.

Time (minutes) Water (gallons)
0 30
5 20
10 10

Which of these statements is true?
Multiple choice question.

A)
The water in the tank is increasing at a rate of 2 gallons per minute.

B)
The water in the tank is increasing at a rate of 10 gallons per minute.

C)
The water in the tank is decreasing at a rate of 2 gallons per minute.

D)
The water in the tank is decreasing at a rate of 10 gallons per minute.

(a) The probability of drawing only odd numbered balls is 1/8 or 0.125.

(b) The probability of the smallest drawn number being equal to k for k = 1,...,10 is (4 choose 1)/ (10 choose 4) or 0.341.

(a) To calculate the probability of only drawing odd numbered balls, we first need to find the total number of ways to draw four balls from the urn, which is (10 choose 4) = 210. Then, we need to find the number of ways to draw only odd numbered balls, which is (5 choose 4) = 5. Thus, the probability of only drawing odd numbered balls is 5/210 or 1/8.

(b) To calculate the probability that the smallest drawn number is equal to k for k = 1,...,10, we first need to find the total number of ways to draw four balls from the urn, which is (10 choose 4) = 210. Then, we need to find the number of ways to draw four balls such that the smallest drawn number is k. We can do this by choosing one ball from the k available balls (since we need to include that ball in our draw to ensure the smallest drawn number is k) and then choosing three balls from the remaining 10-k balls. Thus, the number of ways to draw four balls such that the smallest drawn number is k is (10-k choose 3). Therefore, the probability that the smallest drawn number is equal to k is [(10-k choose 3)/(10 choose 4)] for k = 1,...,10, which simplifies to (4 choose 1)/(10 choose 4) = 0.341.

Learn more about probability here:

https://brainly.com/question/32004014

#SPJ11

The B-coordinate vector of x are (1,2)

In this problem, we are given the basis vectors b₁ = (1, 4, -2) and b₂ = (-2, -7, 3), and the vector x = (-1, -3, 1) that is in the subspace H with basis B. To find the B-coordinate vector of x, we need to determine the coefficients c₁ and c₂ such that:

x = c₁b₁ + c₂b₂

We can solve for c₁ and c₂ by setting up a system of linear equations:

c₁1 + c₂(-2) = -1

c₁4 + c₂(-7) = -3

c₁*(-2) + c₂*3 = 1

We can solve this system using any method of linear algebra, such as Gaussian elimination or matrix inversion. The solution is:

c₁ = 1

c₂ = 2

Therefore, the B-coordinate vector of x is:

[x]B = (1, 2)

This means that x can be expressed as:

x = 1b₁ + 2b₂

In other words, x is a linear combination of b₁ and b₂, and the coefficients of that linear combination are 1 and 2, respectively.

To know more about vector here

https://brainly.com/question/29740341

#SPJ4

The greatest vertical length of the green section should be approximately 3.52 feet.

To determine the greatest vertical length of the green section, we can use the given information that the greatest horizontal length of the green section is 8.8 feet.

Since the ratio of the line segment is 5:2, we can set up a proportion using the horizontal and vertical lengths of the green section:

(horizontal length of green section) / (vertical length of green section) = (5/2)

Let's denote the greatest vertical length of the green section as y. We can rewrite the proportion as:

8.8 / y = 5 / 2

To solve for y, we can cross-multiply and then divide:

8.8 * 2 = 5 * y

17.6 = 5y

Dividing both sides by 5, we get:

y = 17.6 / 5

y ≈ 3.52 feet

Therefore, the greatest vertical length of the green section should be approximately 3.52 feet.

It's important to note that this calculation assumes a linear relationship between the horizontal and vertical lengths of the green section. If there are other factors or constraints involved in the scenario, such as angles or specific geometric properties, a more detailed analysis may be required to determine the exact vertical length.

For more question on length visit:

https://brainly.com/question/28322552

#SPJ8

we have AD = CB and AE = EC, which implies that ABCD is a parallelogram. Moreover, since angle A = 90 degrees, we have angle B = angle D = 90 degrees. Therefore, ABCD is a rectangle.

Given that in quadrilateral ABCD, angle A = 90 degrees = angle C, and diagonal AC bisects diagonal BD.

To prove that ABCD is a rectangle, we need to show that its opposite sides are parallel and equal in length.

Let E be the point where diagonal AC intersects BD. Since AC bisects BD, we have BE = ED.

Now, in triangles ADE and CBE, we have:

AD = CB (opposite sides of a rectangle are equal)

Angle ADE = Angle CBE (each is equal to half of angle BCD)

Angle DAE = Angle BCE (vertical angles are equal)

Therefore, by the angle-angle-side congruence theorem, triangles ADE and CBE are congruent. Hence, AE = EC.

To learn more about rectangle visit:

brainly.com/question/29123947

#SPJ11

Answer:

C. 8 * 1/9

Step-by-step explanation:

the answer is C because 8 * 1/9 = 8/9, and 8/9 is a division equal to 8:9

The rectangular tank initially filled with water measures 28 cm by 18 cm by 12 cm. After draining 0.78 liters of water from the tank, there is 5,268 milliliters (or 5.268 liters) of water left in the tank.

To determine the amount of water left in the tank, we need to calculate the initial volume of water in the tank and subtract the volume of water drained. The volume of a rectangular tank is given by the formula: length × width × height.

The initial volume of water in the tank is calculated as follows:

Volume = 28 cm × 18 cm × 12 cm = 6,048 cm³.Since 1 liter is equal to 1,000 cm³, the initial volume can be converted to liters:

Initial volume = 6,048 cm³ ÷ 1,000 = 6.048 liters.

Next, we subtract the drained volume of 0.78 liters from the initial volume to find the remaining amount:

Remaining volume = Initial volume - Drained volume = 6.048 liters - 0.78 liters = 5.268 liters.

To convert the remaining volume to milliliters, we multiply it by 1,000:

Remaining volume in milliliters = 5.268 liters × 1,000 = 5,268 milliliters.

Therefore, after draining 0.78 liters of water from the tank, there is 5,268 milliliters (or 5.268 liters) of water left in the tank.

Learn more about volume here:

https://brainly.com/question/13338592

#SPJ11

Answer:

x = 0.64, -3.14

Step-by-step explanation:

See attached screenshot for calculations, explanation and a graph too.

Note that the text box you need to input the answer into has very specific formatting when there are 2 answers.

The standard deviation of the sampling distribution of the sample proportion of smokers is 0.05.

Assuming that the proportion of smokers in the population is p, the sample proportion of smokers, denoted by p, is a random variable with mean and standard deviation given by:

[tex]\mu_p[/tex]= p

[tex]\sigma_{p}[/tex]= sqrt(p(1-p)/n)

where n is the sample size.

Since we don't know the value of p, we can use the sample proportion of smokers, denoted by p, as an estimate for p. We are given that a random sample of 100 adults is taken, so n = 100.

Assuming that the sample is representative of the population, we can also assume that the sample proportion of smokers, p, is approximately normally distributed with mean [tex]\mu_p[/tex]=p and standard deviation [tex]\sigma_{p} = \sqrt(p(1-p)/n).[/tex]

To estimate the standard deviation of the sampling distribution of p, we can use p = 0.5 as a conservative estimate for p, since this value maximizes the standard deviation. Substituting this into the formula for [tex]\sigma_{p}[/tex], we get:

[tex]\sigma_p} = \sqrt(0.5(1-0.5)/100) = \sqrt(0.25/100) = 0.05[/tex]

Therefore, the standard deviation of the sampling distribution of the sample proportion of smokers is 0.05.

To know more about proportion refer here:

https://brainly.com/question/30657439

#SPJ11

The product is greater than or equal to 0 when x is greater than or equal to 0.

The product that you're looking for can be obtained by multiplying two expressions.

Since the given condition is that x is greater than or equal to 0, we can proceed to find the product.

Proceeding to find the product is possible because the given condition states that x is greater than or equal to 0.

Let's assume that we have the following two expressions to multiply: (2x + 3) and (5x).

Their product would be: (2x + 3) × (5x) = 10x² + 15x.

This product is greater than or equal to 0 when x is greater than or equal to 0.

Therefore, the product is greater than or equal to 0 when x is greater than or equal to 0.

To know more about expressions, Visit :

https://brainly.com/question/28170201

#SPJ11

Answer:

The answer is approximately 28°

Step-by-step explanation:

let x be ß

[tex] \sin(x) = \frac{opposite}{hypotenuese} [/tex]

sinx=8/17

x=sin‐¹(8/17)

x≈28°

the p-series with p = 4 is:  1/1 + 1/16 + 1/81 + ...

This series converges to a specific value, which is approximately 1.082323.

The p-series is defined as the sum of the reciprocals of the powers of positive integers raised to a certain exponent p. In this case, Euler calculated the sum of the p-series with p = 4, which can be expressed as 1 + 1/16 + 1/81 + ...

Euler utilized his mathematical skills and knowledge to manipulate the series and find a closed-form solution. The process likely involved applying various techniques such as algebraic manipulation, mathematical identities, and possibly calculus or infinite series summation methods.

The result obtained by Euler, 490, signifies that the infinite series converges to a finite value. It demonstrates the concept of convergence, where even though there are an infinite number of terms, the sum can be determined and yields a finite result.

Learn more about series here:

https://brainly.com/question/12707471

#SPJ11

An equation that can be used to find y, the year in which both bodies of water have the same amount of mercury is: C. 0.05 + 0.1y = 0.12 + 0.06y.

In Mathematics and Geometry, the slope-intercept form of the equation of a straight line is given by this mathematical equation;

y = mx + c

Where:

Based on the information provided, a linear equation that models the first water body with respect to its rising rate and number of hours (y) is given by;

R = 0.05 + 0.1y   ....equation 1.

Similarly, a linear equation that models the first water body with respect to its rising rate and number of hours (y) is given by;

R = 0.12 + 0.06y   ....equation 2.

By equating the two equations, we have:

0.05 + 0.1y = 0.12 + 0.06y

Read more on equation here: https://brainly.com/question/28098605

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

The Python code to perform the re-randomization simulation is given below

import random

# Data

weights = [2.5, 3.1, 2.8, 3.2, 2.9, 3.5, 3.0, 2.7, 3.4, 3.3]

# Observed difference in means

obs_diff = (sum(weights[:5])/5) - (sum(weights[5:])/5)

# Re-randomization simulation

num_simulations = 10000

diffs = []

for i in range(num_simulations):

   # Shuffle the data randomly

   random.shuffle(weights)

   # Calculate the difference in means for the shuffled data

   diff = (sum(weights[:5])/5) - (sum(weights[5:])/5)

   diffs.append(diff)

# Calculate the p-value

p_value = sum(1 for diff in diffs if diff >= abs(obs_diff)) / num_simulations

print("Observed difference in means:", obs_diff)

print("p-value:", p_value)

Learn more about Python on

https://brainly.com/question/26497128

#SPJ1

The coefficient of determination, denoted as R², is a statistic that measures the proportion of the variance in the dependent variable that is explained by the independent variables in a regression model.

The coefficient of determination, R², measures the goodness of fit of a regression model. It ranges from 0 to 1, with a higher value indicating a better fit. The calculation of R² involves comparing the variation in the dependent variable (represented by the total sum of squares, TSS) to the variation explained by the regression model (represented by the regression sum of squares, SSR). The formula for R² is SSR/TSS.

R² can be interpreted as the proportion of the total variation in the dependent variable that is accounted for by the independent variables included in the model. In other words, it tells us the percentage of the response variable's variability that can be explained by the regression model.

Learn more about regression here:

https://brainly.com/question/29753986

#SPJ11

The sum of the arithmetic sequence 4, 11, 18, 25, ..., 249 is 4554 and there are 36 terms in the sequence.

(a) To determine the number of terms in the sum, we can find the pattern in the terms.  we observe that each term is obtained by adding 7 to the previous term. Starting from 4 and incrementing by 7, we can write the sequence of terms as 4, 11, 18, 25, ..., and so on.

To find the number of terms, we need to determine the value of n in the equation 4 + 7(n-1) = 249. Solving this equation, we find n = 36. There are 36 terms in the sum.

(b) To compute the sum using a technique discussed in this section, we can use the formula for the sum of an arithmetic series. The formula is given by Sn = (n/2)(2a + (n-1)d), where Sn represents the sum of the series, n is the number of terms, a is the first term, and d is the common difference.

In this case, the first term a is 4, the number of terms n is 36, and the common difference d is 7.

Learn more about arithmetic sequence

brainly.com/question/28882428

#SPJ11

a. When  Y's annual net cash flow from this interest is tax-exempt then income will be $5,200.

If the interest is tax-exempt income, Y's annual net cash flow from the investment can be calculated as follows:

Annual interest income = $65,000 × 8% = $5,200

Since the interest income is tax-exempt, Y does not have to pay taxes on it. Therefore, Y's annual net cash flow from this investment is equal to the annual interest income: $5,200.

b. If the interest is taxable income then annual net cash flow will be  $3,640.

If the interest is taxable income, Y's annual net cash flow from the investment needs to account for the taxes owed on the interest income. The tax owed can be calculated as follows:

Tax owed = Annual interest income × Marginal tax rate

Tax owed = $5,200 × 30% = $1,560

Subtracting the tax owed from the annual interest income gives us the annual net cash flow:

Annual net cash flow = Annual interest income - Tax owed

Annual net cash flow = $5,200 - $1,560 = $3,640

Therefore, if the interest is taxable income, Y's annual net cash flow from this investment would be $3,640.

To know more about interest refer here:

https://brainly.com/question/29222674?#

#SPJ11

The equation of the plane tangent to the following surface 4xy+yz+5xz−40=0; at the given point (2,2,2) is  18x + 10y + 12z = 80. Gradient vector of the surface at that point is used to find the equation of plane.

To find an equation of the plane tangent to the surface at the given point, we need to find the gradient vector of the surface at that point. The gradient vector is perpendicular to the tangent plane, so we can use it to write the equation of the plane.

First, we need to find the partial derivatives of the surface with respect to x, y, and z:

∂/∂x (4xy + yz + 5xz - 40) = 4y + 5z

∂/∂y (4xy + yz + 5xz - 40) = 4x + z

∂/∂z (4xy + yz + 5xz - 40) = y + 5x

At the point (2,2,2), these partial derivatives evaluate to:

∂/∂x (4xy + yz + 5xz - 40) = 4(2) + 5(2) = 18

∂/∂y (4xy + yz + 5xz - 40) = 4(2) + 2 = 10

∂/∂z (4xy + yz + 5xz - 40) = 2 + 5(2) = 12

So the gradient vector is:

∇f = <18, 10, 12>

At the point (2,2,2), the equation of the tangent plane is:

18(x - 2) + 10(y - 2) + 12(z - 2) = 0

18x - 36 + 10y - 20 + 12z - 24 = 0

18x + 10y + 12z - 80 = 0

18x + 10y + 12z = 80

So the equation of the tangent plane at (2,2,2) is 18x + 10y + 12z = 80.

To learn more plane  : https://brainly.com/question/1655368

#SPJ11

The distance between the points (-2, -5) and (-14, -10) is 13 units.

To find the distance between the points (-2, -5) and (-14, -10) using the distance formula, follow these steps:

1. Identify the coordinates: Point A is (-2, -5) and Point B is (-14, -10).
2. Apply the distance formula: d = √[(x2 - x1)^2 + (y2 - y1)^2]
3. Substitute the coordinates into the formula: d = √[(-14 - (-2))^2 + (-10 - (-5))^2]
4. Simplify the equation: d = √[(-12)^2 + (-5)^2]
5. Calculate the squared values: d = √[(144) + (25)]
6. Add the squared values: d = √(169)
7. Calculate the square root: d = 13

So, The distance between the points (-2, -5) and (-14, -10) is 13 units.

Learn more about coordinates

brainly.com/question/16634867

#SPJ11

Leila served 30 orders, Keith served 36 orders, and Michael served 21 orders.

Let's assume the number of orders served by Michael is M. According to the given information, Keith served 3 times as many orders as Michael, so Keith served 3M orders. Leila served 7 more orders than Michael, which means Leila served M + 7 orders.

The total number of orders served by all three individuals is 87. We can set up the equation: M + 3M + (M + 7) = 87.

Combining like terms, we simplify the equation to 5M + 7 = 87.

Subtracting 7 from both sides, we get 5M = 80.

Dividing both sides by 5, we find M = 16.

Therefore, Michael served 16 orders. Keith served 3 times as many, which is 3 * 16 = 48 orders. Leila served 16 + 7 = 23 orders.

In conclusion, Michael served 16 orders, Keith served 48 orders, and Leila served 23 orders.

Learn more about  Dividing here :

https://brainly.com/question/15381501

#SPJ11

The volume of the pyramid is 18.86 cubic meters.

Now, For the volume of a pyramid with a square base, we can use the formula:

Volume = (1/3) x Base Area x Height

Given that;

the area of the base is 6.5 m² and the height of the pyramid is 8.6 m,

Hence, we can substitute these values in the formula to get:

Volume = (1/3) x 6.5 m² x 8.6 m

Volume = 18.86 m³

(rounded to two decimal places)

Therefore, the volume of the pyramid is 18.86 cubic meters.

Learn more about the multiplication visit:

https://brainly.com/question/10873737

#SPJ1

The requried, 58.33% of a 14K gold ring is real gold.

To find the percentage of a 14K gold ring that is real gold, we can use the formula:

percentage = (part/whole) x 100

In this case, the "part" is the number of parts that are real gold, which is 14. The "whole" is the total number of parts, which is 24.

So the percentage of real gold in a 14K gold ring is:

percentage = (14/24) x 100 = 58.33%

Therefore, approximately 58.33% of a 14K gold ring is real gold.

Learn more about percentages here:

https://brainly.com/question/28269290

#SPJ1`

The profit that will be made if the cost for making each vetkoek is R4.00 and the costs of all ingredients is R623.48 per week is R2 720.00. Therefore, the profit is R2 720.00.

Profit is the excess of revenue over cost. The learners in the above problem are selling 340 vetkoeks per week for 15 weeks at R12.00 each vetkoek.

We want to calculate the profit that they will make assuming the cost of making each vetkoek is R4.00 and the costs of all ingredients is R623.48 per week.

Here is the breakdown of the calculations;

Cost of making each vetkoek

= R4.00Cost of all ingredients per week

= R623.48Number of vetkoeks sold per week

= 340Selling price of each vetkoek

= R12.00 per vetkoek Revenue generated per week

= Selling price per vetkoek × Number of vetkoeks sold per week= R12.00/vetkoek × 340 vetkoeks

= R4 080.00 per week.

Cost of producing each vetkoek

= R4.00Profit generated per vetkoek

= Selling price of each vetkoek − Cost of producing each vetkoek= R12.00/vetkoek − R4.00/vetkoek

= R8.00/vetkoek.

Profit generated per week

= Profit generated per vetkoek × Number of vetkoeks sold per week= R8.00/vetkoek × 340 vetkoeks

= R2 720.00 per week.

The profit that will be made if the cost for making each vetkoek is R4.00 and the costs of all ingredients is R623.48 per week is R2 720.00. Therefore, the profit is R2 720.00.

To know more about Profit  visit :

https://brainly.com/question/21297845

#SPJ11

Answer: A

Step-by-step explanation:

The solution to this equation –3x + 1 + 10x = x + 4 include the following: A. x = 1/2.

In order to create a list of steps and determine the solution to the equation, we would have to rearrange the variables and constants, and then collect like terms as follows;

–3x + 1 + 10x = x + 4

-3x + 10x - x = 4 - 1

6x = 3

By dividing both sides of the equation by 6, we have the following:

6x = 3

x = 3/6

x = 1/2

In conclusion, we can reasonably infer and logically deduce that solution to this equation –3x + 1 + 10x = x + 4 is 1/2 or 0.5.

Read more on solution and equation here: brainly.com/question/25858757

#SPJ1

Complete Question:

Solve the equation.

–3x + 1 + 10x = x + 4

x = 1/2

x = 5/6

x = 12

x = 18

The answer is A. Yes, because the situation satisfies all four conditions for a binomial experiment.

In a binomial experiment, there are four conditions that need to be met:

Since the given situation satisfies all four conditions for a binomial experiment, the correct answer is A. Yes, it is a binomial experiment.

To learn more about binomial experiment visit:

brainly.com/question/30888365

#SPJ11

Answer:

The volume of the hemisphere is 2/3 of the volume of the cone.

Step-by-step explanation:

pa brainly po and thanks

The value of the surface integral is 9π/2.

We can use the divergence theorem to evaluate this surface integral by converting it to a triple integral over the solid enclosed by the sphere. The divergence of the vector field f is:

div(f) = ∂(4x)/∂x + ∂(3z)/∂z + ∂(-3y)/∂y

= 4 + 0 - 3

= 1.

The divergence theorem then gives:

∫∫sf⋅ ds = ∭v div(f) dV

where v is the solid enclosed by the sphere.

Since the sphere is centered at the origin and has radius 3, we can write the equation in spherical coordinates as:

x = r sin(θ) cos(φ)

y = r sin(θ) sin(φ)

z = r cos(θ).

with 0 ≤ r ≤ 3, 0 ≤ θ ≤ π/2, and 0 ≤ φ ≤ π/2.

The Jacobian of the transformation is:

|J| = [tex]r^2[/tex] sin(θ)

and the triple integral becomes:

[tex]\int\int\int v div(f) dV = \int 0^{\pi /2} \int 0^{\pi /2} \int 0^3 (1) r^2 sin(\theta ) dr d\theta d\phi[/tex]

Evaluating this integral, we get:

[tex]\int\int sf. ds = \int \int \int v div(f) dV = \int 0^{\pi /2} ∫0^{\pi/2} \int 0^3 (1) r^2 sin(\theta) dr d\theta d\phi[/tex]

[tex]= [r^3/3]_0^3 [cos(\theta )]_0^{\pi /2} [\phi ]_0^{\pi /2 }[/tex]

[tex]= (3^3/3) (1 - 0) (\pi /2 - 0)[/tex]

= 9π/2.

For similar question on integral.

https://brainly.com/question/27360126

#SPJ11

The surface integral of the given vector field over the specified surface can be evaluated using the divergence theorem and a suitable transformation of variables. The final result is 9π/2.

The surface S is the part of the sphere x^2 + y^2 + z^2 = 9 in the first octant, which can be parameterized as:

r(u, v) = (3sin(u)cos(v), 3sin(u)sin(v), 3cos(u))

where 0 ≤ u ≤ π/2 and 0 ≤ v ≤ π/2.

The unit normal vector to S is:

n(u, v) = (sin(u)cos(v), sin(u)sin(v), cos(u))

The divergence of f is:

div(f) = ∂(4x)/∂x + ∂(3z)/∂z + ∂(-3y)/∂y = 4 + 0 - 3 = 1

Using the Divergence Theorem, we have:

∫∫sf · dS = ∫∫∫V div(f) dV

where V is the solid bounded by S. In this case, we can use the Jacobian transformation to convert the triple integral to an integral over the parameter domain:

∫∫sf · dS = ∫∫∫V div(f) dV = ∫∫R ∫0^3 div(f(r(u, v))) |J(r(u, v))| du dv

where R is the parameter domain and J(r(u, v)) is the Jacobian of the transformation r(u, v). The Jacobian in this case is:

J(r(u, v)) = ∂(x, y, z)/∂(u, v) = 9sin(u)

Substituting in the values, we get:

∫∫sf · dS = ∫∫R ∫0^3 div(f(r(u, v))) |J(r(u, v))| du dv

= ∫u=0^(π/2) ∫v=0^(π/2) ∫t=0^3 1 * 9sin(u) dt dv du

= 9π/2

Therefore, the surface integral ∫∫sf · dS over the part of the sphere in the first octant is 9π/2.

To learn more about parametrization click here: brainly.com/question/14666291

#SPJ11

Answer:

ASA

Step-by-step explanation:

Given: HQ bisects both ∠MHR and ∠MQR Prove: △HMQ ≅ △HRQ

Statement Reason

HQ bisects both ∠MHR and ∠MQR | Given

∠MHQ = ∠HRQ and ∠MQH = ∠RQH | Definition of angle bisector

HQ = HQ | Reflexive property of equality

△HMQ ≅ △HRQ | AAS rule

The position vector of the particle is r(t) = (1/2)t^2 i + (e^t -1) j + (1-e^-t) k + j + k.

Given: a(t) = ti + e^tj + e^-tk, v(0) = k, r(0) = j+k.

Integrating the acceleration function, we get the velocity function:

v(t) = ∫ a(t) dt = (1/2)t^2 i + e^t j - e^-t k + C1

Using the initial velocity, v(0) = k, we can find the constant C1:

v(0) = C1 + k = k

C1 = 0

So, the velocity function is:

v(t) = (1/2)t^2 i + e^t j - e^-t k

Integrating the velocity function, we get the position function:

r(t) = ∫ v(t) dt = (1/6)t^3 i + e^t j + e^-t k + C2

Using the initial position, r(0) = j+k, we can find the constant C2:

r(0) = C2 + j + k = j + k

C2 = 0

So, the position function is:

r(t) = (1/6)t^3 i + (e^t -1) j + (1-e^-t) k + j + k

For more questions like Vector click the link below:

https://brainly.com/question/29740341

#SPJ11