Question 9 of 10
The bonds of the products store 22 kJ more energy than the bonds of the
reactants. How is energy conserved during this reaction?
OA. The reaction creates 22 kJ of energy when bonds form.
OB. The reaction uses up 22 kJ of energy when bonds break.
OC. The surroundings absorb 22 kJ of energy from the reaction
system.
D. The reaction system absorbs 22 kJ of energy from the
surroundings.
SUBMIT

Answers

Answer 1

The correct answer is D. The reaction system absorbs 22 kJ of energy from the surroundings.

Energy conservation in a chemical reaction is governed by the principle of conservation of energy, which states that energy cannot be created or destroyed, but only transferred or converted from one form to another. In this case, the fact that the bonds of the products store 22 kJ more energy than the bonds of the reactants implies that energy has been transferred from the surroundings to the reaction system. During a chemical reaction, bonds are broken in the reactants and new bonds are formed in the products. Breaking bonds requires energy input, while forming bonds releases energy. In this scenario, the energy stored in the new bonds of the products is greater than the energy stored in the bonds of the reactants. This means that the reaction system absorbs energy from the surroundings to facilitate the bond formation process. option(d)

For such more questions on energy

https://brainly.com/question/1634438

#SPJ11


Related Questions

What information do we know about the known exoplanets? a. estimates of orbits and masses b. complete composition c. precise masses d. all of the above e. none of the above

Answers

The correct option is A. The information we know about the known exoplanets is estimates of orbits and masses.

What is exoplanets?

An exoplanet or extrasolar planet is a planet outside the Solar System.

In other words, exoplanet is any planet beyond our solar system.

Characteristics of exoplanets

exoplanets are known for the following characteristics;

they are usually hotthey can orbit their stars so tightly that a “year” lasts only a few daysthey can orbit two suns at once

Thus, the information we know about the known exoplanets is estimates of orbits and masses.

Learn more about exoplanets here: https://brainly.com/question/1514493

#SPJ1

A 540 gram object is attached to a vertical spring, causing the spring’s length to change from 70 cm to 110 cm.

What is the spring constant k?

Group of answer choices

130 N/m

33 N/m

13 N/m

330 N/m

Answers

Answer:

Approximately [tex]13\; {\rm N \cdot m^{-1}}[/tex] (assuming that [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex].)

Explanation:

Let [tex]F_{\text{s}}[/tex] denote the force that this spring exerts on the object. Let [tex]x[/tex] denote the displacement of this spring from the equilibrium position.

By Hooke's Law, the spring constant [tex]k[/tex] of this spring would ensure that [tex]F_\text{s} = -k\, x[/tex].

Note that the mass of the object attached to this spring is [tex]m = 540\; {\rm g} = 0.540\; {\rm kg}[/tex]. Thus, the weight of this object would be [tex]m\, g = 0.540\; {\rm kg} \times 9.81\; {\rm N \cdot kg^{-1}} \approx 5.230\; {\rm N}[/tex].

Assuming that this object is not moving, the spring would need to exert an upward force of the same magnitude on the object. Thus, [tex]F_{\text{s}} = 5.230\; {\rm N}[/tex].

The spring in this question was stretched downward from its equilibrium by:

[tex]\begin{aligned} x &= (70\; {\rm cm} - 110\; {\rm cm}) \\ &= (-40)\; {\rm cm} \\ &= (-0.40) \; {\rm m}\end{aligned}[/tex].

(Note that [tex]x[/tex] is negative since this displacement points downwards.)

Rearrange Hooke's Law to find [tex]k[/tex] in terms of [tex]F_{\text{s}}[/tex] and [tex]x[/tex]:

[tex]\begin{aligned} k &= \frac{F_{\text{s}}}{-x} \\ &\approx \frac{5.230\; {\rm N}}{-(-0.40)\; {\rm m}} \\ &\approx 13\; {\rm N \cdot m^{-1}}\end{aligned}[/tex].

A force does work on an object if a component of the force __________.
Group of answer choices

a. is parallel to the displacement of the object

b. is perpendicular to the displacement of the object

c. perpendicular to the displacement of the object moves the object along a path that returns to its starting point

d. parallel to the displacement of the object moves the object along a path that returns to its starting point

Answers

Option A.  A force does work on an object if a component of the force is  is parallel to the displacement of the object.

Work done by force

The force applied to an object to displace it from a given point to another point is known as work done on the object.

W = Fd cosθ

where;

f is the magnitude of applied forced is the displacement of the object.θ is the angle between the applied force and displacement.

Thus, A force does work on an object if a component of the force is  is parallel to the displacement of the object.

Learn more about work done here:https://brainly.com/question/8119756

#SPJ1

what is the best fuse for 1000 w heater?
a)3A
b)4A
c)5A
d)11A​

Answers

c)5A

Explanation:

As,

[tex]I = \frac{P}{V} = \frac{1000}{220} = 5[/tex]

What was the role of gravity in the formation of the solar system?
A. Gravity caused the solar system to move closer to the Sun.
OB. Gravity caused the solar system to compress into one larger
mass.
OC. Gravity caused the solar system to separate into individual
celestial bodies.
D. Gravity caused the solar system to expand from a central point.

Answers

The role of Gravity in the formation of the solar system is that gravity caused the the solar system to move closer to the Sun.

  This was possible because gravity attracted smaller particles together until they formed large particles and began to rotate around the sun.

What is Gravity?

Gravity is the force by which a planet or other body draws objects toward its center. The force of gravity keeps all of the planets in orbit around the sun.

Gravity can also be said to mean an attraction between objects  objects with mass.

Learn more about Gravity at https://brainly.com/question/557206

#SPJ1

An astronomical telescope is designed with over magnification of 35x if the object has a focal length of 100 cm what should be the focal length of the eyepiece and how far should the eyepiece be from the objective

Answers

The focal length of eyepiece is 2.85.

It is given that astronomical telescope is designed with over magnification of 35.

The object has a focal length of 100 cm.

We need to determine the focal length of the eyepiece.

The formula to be used here is for astronomical telescope is:

[tex]m=\frac{f_{0} }{f_{e} }[/tex]

Using values here, we get

[tex]35=\frac{100 }{f_{e} }[/tex]

[tex]f_{e}=100/35=2.85[/tex]

Hence, the focal length of eyepiece is 2.85

Learn more about astronomical telescope click here https://brainly.com/question/14672626

#SPJ1

A uniform bar 15m long balanced on a pivot at its midpoint. A boy of mass 55kg sits on one arm of the bar at a point 5m away from the pivot. What mass can be placed 2m away from the other end of the bar to keep the bar horizontally

Answers

The mass at the other end of bar will be 50g .

what is mass

It is the fundamental property of matter , every single property which exist in this world has mass

Mass never can be 0 .

So , the system is in equilibrium

let mass of the body be m

55×5= m×5.5

m= 5 5 × 5 /. 5.5

m= 5 0g



to learn more about mass click here https://brainly.com/question/26150306

#SPJ9

137.5 kg mass can be placed 2m away from the other end of the bar to keep the bar horizontally.

What does horizontal mean?Any straight line traveling from left to right or right to left is a horizontal line. If two points on a line share the same Y-coordinates, the line is said to be horizontal in coordinate geometry. It is derived from the word "horizon." In other words, the horizon or x-axis is always parallel to the horizontal lines.In the coordinate plane, a horizontal line is a straight line drawn from right to left or from left to right, perpendicular to the x-axis. In other words, a horizontal line is a straight line with an intercept solely on the y-axis, not the x-axis.

To keep the bar horizontal, the right and left side torques must be equal:

[tex]F_{1} d_{1} =F_{2} d_{2}[/tex]

[tex]F_{2} =F_{1} \frac{d_{1} }{d_{2} }[/tex]

    [tex]=(55.9.8)\frac{5}{2}[/tex]

    =1347.5 N.

Convert this force of gravity into mass:

[tex]F_{2} =m_{2} g,[/tex]

[tex]m_{2} =\frac{F_{2} }{g}[/tex]

     [tex]=\frac{1347.5}{9.8}[/tex]

     =137.5 kg.

The answer is 137.5 kg.

To learn more about Horizontal, refer to:

https://brainly.com/question/25806750

#SPJ9

Three charges, qA is +6.0 μC, qB is –5.0 μC, and qc is +6.0 μC, are located at the corners of a square with each
side length at 5.0 cm as shown in the diagram. Calculate the electric field at point D.

Answers

The net electric field at point D is determined as 3.95 x 10⁷ N/C.

Electric field at D due to charge A

E = kq/r²

where;

r is the distance between A and Dq is charge A

E(AD) = (9 x 10⁹ x 6 x 10⁻⁶)/(0.05²)

E(AD) = 2.16 x 10⁷ i N/C

Electric field at D due to charge B

E = kq/r²

where;

r is the distance between A and Bq is charge B

r² = 5²  + 5²

r² = 50

r = √50

r = 7.07 cm

E(BD) = (9 x 10⁹ x 5 x 10⁻⁶)/(0.0707²)

E(BD) = 9 x 10⁶ N/C

in x - direction = 9 x 10⁶ N/C x cos(45) = 6.36 x 10⁶ i  N/C

in y - direction = 9 x 10⁶ N/C x sin(45) = 6.36 x 10⁶j  N/C

Electric field at D due to charge C

E = kq/r²

where;

r is the distance between C and Dq is charge C

E(CD) = (9 x 10⁹ x 6 x 10⁻⁶)/(0.05²)

E(CD) = 2.16 x 10⁷ j N/C

sum of electric field in x direction

Ei = 2.16 x 10⁷ i N/C  + 6.36 x 10⁶ i  N/C

Ei = 2.796 x 10⁷ i N/C

sum of  electric field in y direction

Ej = 2.16 x 10⁷ j N/C  + 6.36 x 10⁶j  N/C

Ej = 2.796 x 10⁷ j N/C

Resultant electric field at D

E = √Ei² + Ej²

E = √[(2.796 x 10⁷)² + (2.796 x 10⁷)²]

E = 3.95 x 10⁷ N/C

Thus, the net electric field at point D is determined as 3.95 x 10⁷ N/C.

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1

A lightning strike can transfer as much as electrons from the cloud to the ground. if the strike lasts 2ms , what is the average electric current in the lightning?

Answers

The average electric current in the lightning will be 8 × [tex]10^{-17}[/tex] A

Why Lightning Conductors on top of a tower ?

The lightning conductors are long metal strips running from the spike end of a conductor on the top of a building to the earth. They are used to prevent buildings from destruction when struck by thunder or lightning.

Given that a lightning strike can transfer as much as electrons from the cloud to the ground. if the strike lasts 2ms, to calculate the average electric current in the lightning, we will first consider the charge released.

one charge = 1.6 × [tex]10^{-19}[/tex] C

Average current I = Q/t

Where

Q = charge = 1.6 × [tex]10^{-19}[/tex] Ct = time = 2ms = 2 × [tex]10^{-3}[/tex] sI = current = ?

Substitute all the parameters into the formula

I = 1.6 × [tex]10^{-19}[/tex] C ÷ 2 × [tex]10^{-3}[/tex]

I = 8 × [tex]10^{-17}[/tex] A

Therefore, the average electric current in the lightning will be 8 × [tex]10^{-17}[/tex] A

Learn more about Lightning here: https://brainly.com/question/3183045

#SPJ1

The spectral type of this star is B7V. The order of spectral types, from hottest to coolest, is OBAFGKM. How does the surface temperature of this star compare with the other stars we have observed

Answers

The hottest celebrity is this one.

The majority of stars fall under a select few spectral categories. The hottest to the coldest stars are listed in the spectral types of the Henry Draper and Bright Star Catalogues (see stellar classification). The letters O, B, A, F, G, K, and M are used to indicate these categories in decreasing order of temperature.

What is Spectral type of star ?

Using spectral types, we can categorise stars based on their colour or the spectral lines that are visible in their light. The spectral types are OBAFGKM, with the hottest stars being O and the coldest being M. To humans, cooler stars appear redder and hotter stars appear bluer.

The letters O, B, A, F, G, K, and M are used to denote the seven classes into which the stars are classified

Learn more about Spectral type of stars here:

https://brainly.com/question/2658702

#SPJ4

A plastic rod is charged up by rubbing a wool cloth, and brought to an initially neutral metallic sphere that is insulated from ground. It is allowed to touch the sphere for a few seconds, and then is separated from the sphere by a small distance. After the rod is separated, the rod:.

Answers

After the rod is charged and then touched on the neutral metallic sphere and then separated from it, the rod  is repelled by the sphere. Option A

What is a static charge?

There are very ways in which a static charge could be built up in an object. The ways include;

FrictionElectrostatic induction and Contact

Now, after the rod is charged and then touched on the neutral metallic sphere and then separated from it, the rod  is repelled by the sphere.

Missing parts;

A plastic rod is charged up by rubbing a wool cloth, and brought to an initially neutral metallic sphere that is insulated from the ground. It is allowed to touch the sphere for a few seconds, and then is separated from the sphere by a small distance. After the rod is separated, the rod

A. is attracted by the sphere

B. is repelled by the sphere

C. feels no force due to the sphere

Learn more about static charges:https://brainly.com/question/14485896

#SPJ1

Why is quantum computing potentially a better fit for weather forecasting than classical computers?.

Answers

Quantum computing is a better fit than classical computing because it can access advanced simulations for vast quantities of weather.

What is Quantum computing?

Quantum computing can process large number of data sets of weather for all the properties of quantum states. Unlike classical computers which contains only standard bits 0 and 1 , quantum computing use Qubit or Quantum bit in which there are more than two standard sets of bits. These Qubits can measure the light at any degrees of polarisation between 1 and 0.This is the spin attribute that corresponds to superposition. This can create a lot more possibilities beacuse we can run multiple tasks at once with only one bit of data beacuse of the superpositioned qubit. This unlike classical computers where the bit can be only 1 and 0 is more effectively used in breaking encryption tasks.

So, the analysis of vast quantities of weather data can be done in seconds using Quantum computing.

Learn more about Quantum computing here:

https://brainly.com/question/15188300

#SPJ1

physical and chemical properties of water​

Answers

(Not sure how many examples you need so I will put three for each)


Physical:

As you now know, water in its natural condition is a colorless, odorless, and tasteless liquid. The hexagonal structure of water's crystals.The temperature at which a liquid's vapor pressure equals the pressure around it, turning the liquid into vapor, is known as the boiling point. We are aware that water reaches its boiling point at 100°C.The temperature at which a material transition from a liquid to a solid is known as the freezing point. The freezing point of water, which is 0°C or 32°F, is the temperature at which liquid water changes to solid ice.

Chemical:

One of the most significant characteristics of water is its amphoteric tendency. Amphoteric refers to a substance's capacity to function as an acid or base. Water is neither acidic nor basic in its natural form. Its capacity to give and receive protons is the key justification. However, rainfall has a pH between 5.2 and 5.8, making it mildly acidic.Water is referred to be the all-purpose solvent. This is due to its chemical makeup, physical characteristics, high dielectric constant, and other factors that make it the most solvent material. It can attract other compound molecules, disabling their molecular forces and causing them to dissolve since hydrogen and oxygen both have positive and negative charges that are available.Water is a chemical molecule made up of two hydrogen atoms and one oxygen atom. The liquid condition of that substance is often referred to as water, and the solid and gas phases are respectively referred to as ice and steam.

Monochromatic light with wavelength 590 nm passes through a single slit 2. 30 ?m wide and 1. 90 m from a screen. Find the distance between the first- and second-order dark fringes on the screen.

Answers

Answer:

The fringes are 4.7*10^-7 m apart, such that they are adjacent.

Explanation:

Using the formula for adjacent fringes given a single slit:

Δ[tex]x=\frac{(Wavelength)(Distance between slit and screen)}{Width}[/tex]

Δ[tex]x=\frac{(590/10^{9})(1.90) }{(2.30)}[/tex]

Δ[tex]x=0.000000487 m[/tex]

Hope this helps!

The distance between the first-order and second-order dark fringes on the screen will be 4.874 × 10⁻⁵ cm.

Given:

wavelength, λ = 590 nm = 590 × 10⁻⁹ m

Distance between the slit and screen, D = 1.90 m

Width of slit, d = 2.30 m

Calculation:

We know that the distance between two slits is given as:

Δx = λD / d

where  λ is the wavelength of light

           D is the distance between the slit and screen

           d is the width of the slit

Applying values in the above equation we get:

Δx = (590 × 10⁻⁹ m)(1.90 m) / (2.30 m)

    = 4.874 × 10⁻⁷ m

    = 4.874 × 10⁻⁵ cm

Therefore, the distance between the first- and second-order dark fringes on the screen will be 4.874 × 10⁻⁵ cm.

Learn more about interference here:

https://brainly.com/question/16098226

#SPJ4

A large box is being pushed across the floor at a constant speed of 4.0 m/s. What can you conclude about the forces acting on the box?

Answers

There is no force acting on the large box.

What is the force according to Newton's law?According to Newton's second law of motion, Force is defined as the rate of change of momentum with respect to time.Mathematically, force = mass × accelerationAnd acceleration = velocity/ timeHere, the large box is moving with constant velocity. So its velocity is not changing with time.So velocity / time = zero i.e. acceleration= zeroIt leads to the force to be zero.

Thus, we can conclude that the force on the large box is zero.

Learn more about the Newton's second law of motion here:

brainly.com/question/25545050

#SPJ1

Why stars are shows like twinkling in the sky’s!
Reply please!

Answers

Answer:

As light from a star races through our atmosphere, it bounces and bumps through the different layers, bending the light before you see it. Since the hot and cold layers of air keep moving, the bending of the light changes too, which causes the star's appearance to wobble or twinkle.

Pearl labels a diagram of a charged capacitor as shown. Which change would correct the error in the diagram?
A) changing +2Q to +Q
B) changing +2Q to –2Q
C) reversing the direction of the arrows
D) reversing the labels for Conductors and Insulator

Answers

To correct the error in the diagram, we need to change +2Q to +Q in order for the charges to become balanced. Option A

What is a capacitor?

A capacitor is  device that is used for storing electric charge. We know that the capacitor is composed of two conductors separated by an insulator.

In order to correct the error in the diagram, we need to change +2Q to +Q in order for the charges to become balanced. Option A

Learn more about capacitor:https://brainly.com/question/17176550

#SPJ1

Answer:

A

Explanation:

Excessive use of fossil fuels causes an energy crisis

Answers

yes, it causes an energy crisis. Burning Fossil Fuels

When we burn oil, coal, and gas, we don't just meet our energy needs, we move the current global warming crisis as well.

Fossil fuels produce large amounts of carbon dioxide when burned. Carbon emissions trap heat in the air and lead to climate change.

What are the major causes of energy crisis?

Most energy crises have been caused by localized shortages, wars and market manipulation. Some have argued that government efforts like tax hikes, nationalization of energy companies, and rule of the energy sector, shift supply and demand of energy away from its economic stability.

To learn more about Burning Fossil Fuels, refer

https://brainly.com/question/21222206

#SPJ9

The spectral type of this star is listed as K5V. (V means it is a main sequence star.) Based on the table below, how does the surface temperature of this star compare with that of HIP 87937

Answers

It turns out that the star in question belongs to the K5V star class. Thus, the surface temperature of this must be between 5200 K and 3700 K. It has a surface temperature of 6200 K to 5200 K and is a G2V class star, commonly known as Bernard's star. In other words, the star in question has a colder surface than HIP 87937. This is further explained below.

What is surface temperature?

Generally, The temperature at a surface is referred to as the surface temperature. In particular, it may refer to the surface air temperature, which is the temperature of the air that is relatively close to the earth's surface.

In conclusion, The star in question is of the K5V type. Therefore, the temperature of the surface of this must be somewhere between 5200 and 3700 kelvin. The star with the designation HIP 87937, often known as Bernard's star, is of the G2V type. Stars of this type have a surface temperature that falls anywhere between 6200 and 5200 degrees Celsius. Therefore, it should come as no surprise that the surface temperature of the given star is lower than that of HIP 87937.

Read more about surface temperature

https://brainly.com/question/5344945

#SPJ1

Answer: It is hotter because K is before M

Explanation:

The actual surface temperature of this star is 4600 KK compared to 3100 KK for the M4 star in Parts A and B.

What must the charge (sign and magnitude) of a 3.45 g particle be for it to remain stationary when placed in a downward-directed electric field of magnitude 590 N/C

Answers

     charge must be equal to 5.74 ×10⁻⁵

 In the question it is said that the particle remains stationary which means the the net force on the particle is zero. So, the counterbalancing forces must be equal which means weight is equal to upward electric force.

     →    Fnet =0

     →    mg =  qE

 substituting the values we get :

         0.00345 × 9.81 =  q × 590

   →       q = 5.74 ×10⁻⁵

    Hence the charge must be equal to   5.74 ×10⁻⁵.

   Learn more about charges here:

          https://brainly.com/question/26092261

                    # SPJ4

When a voltage of 12 V is applied to a resistor, a current of 2.5 A passes through it. What is the resistance of the resistor

Answers

Answer:

4.8 Ω

Explanation:

Ohm's law

V = IR

 or    V/I = R

        12/2.5 = R = 4.8 Ω

A 36.5-g glass thermometer reads 23.6 ∘C before it is placed in 145 mL of water. When the water and thermometer come to equilibrium, the thermometer reads 40.8 ∘C. Ignore the mass of fluid inside the glass thermometer. The value of specific heat for water is 4186 J/kg⋅C∘, and for glass is 840 J/kg⋅C∘.

Answers

The initial temperature of the water was [tex]41.6688^{0} C[/tex].

Given,

Weight of glass 36.5g

specific heat for glass is 840 J/kg⋅C∘.

Initial temperature of glass was  [tex]23.6^{0} C[/tex].

Weight of water is 145*1=145g (Density*Volume=145ml*1g/ml)

Temperature final was [tex]40.8^{0} C[/tex].

specific heat for water is 4186 J/kgâ‹…Câˆ

(m of glass)(Cp of glass)(Tf_glass-Ti_glass) = (m of water)(Cp of water)(Ti_water - Tf_water)

36.5*840*(40.8-23.6)=145*4186*(Ti_water - 40.8)

Ti_water=[tex]41.6688^{0} C[/tex]

Specific heat

In thermodynamics, a material's specific heat capacity, or massic heat capacity as it is sometimes known, is equal to the heat capacity of a sample of the substance divided by the mass of the sample (symbol cp). Informally, it is the quantity of heat needed to raise a substance's temperature by one degree for every unit of mass that is added to it. joule per kelvin per kilogram, or Jkg1K1, is the SI unit for specific heat capacity. For instance, the amount of energy needed to increase the temperature of 1 kilogram of water by 1 K is 4184 joules, making water's specific heat capacity 4184 J kg 1 K 1.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ4

You are singing a song at karaoke and reach a part that requires a louder, more intense sound. What must you do to produce a louder sound

Answers

More energy is used in creating a louder sound from the mouth.

What must you do to produce a louder sound?

We use more energy in order to produce a louder sound because energy is the thing that helps in the formation of loud sound. Loudness is dependent on the energy that creates loud sound in the mouth. More energy we apply, more loud sound will produce. Energy is the main factor which gives us a loud sound in each and every instruments. Without, we can't imagine loud sound.

So we can conclude that more energy is used in creating a louder sound from the mouth.

Learn more about sound here: https://brainly.com/question/1199084

#SPJ1

Consider vectors u and v, where u = ⟨1, –1⟩ and v = ⟨1, 1⟩. what is the measure of the angle between the vectors?

Answers

The angle between the two vectors is 0⁰, thus the two vectors are parallel to each other.

Angle between the vectors

The angle between the vectors describes the direction of the vector and the value of the angle can be determined from the horizontal and vertical components of the vectors as shown below.

The sum of the horizontal components and vertical components of the vectors is calculated as follows;

Sum of the horizontal component of the vectors, x = 1 + 1 = 2

Sum of the vertical component of the vectors, y = -1 + 1 = 0

The angle between the vectors is calculated as follows;

θ = arc tan (y/x)

θ = arc tan (0/2)

θ = arc tan (0)

θ = 0⁰

The angle between the two vectors is 0⁰, thus the two vectors are parallel to each other.

Learn more about vectors here: https://brainly.com/question/25811261

#SPJ1

Answer: C. 90°

Explanation:

Two parallel wires are separated by 0.36 m. Wire A carries 4.8 A and Wire B carries 8.9 A, both currents in the same direction. The force on 0.53 m of Wire A is:

Answers

The force on 0.53 m of Wire A is 1.3×10^(-5) N.

To find the answer, we need to know about the force on a current carrying wire due to another parallel wire.

What's the force experienced by a current carrying wire of length L due to another current carrying parallel wire?The magnetic force experienced by the wire here= μ₀IAIBL/(2πr)IA= current in wire A, IB= current in wire B, L = length of wire and r= separation between themWhat's the force on 0.53 m of Wire A, if IA, IB, L and r are 4.8A, 8.9A, 0.53m and 0.36 m respectively?

Force = (4π×10^(-7)×4.8×8.9×0.53)/(2π×0.36)

          = 1.3×10^(-5) N

Thus, we can conclude that the force on 0.53 m of Wire A is 1.3×10^(-5) N.

Learn more about the magnetic force here:

brainly.com/question/25932320

#SPJ4

When a person is standing upright, the weight of anything being lifted and carried in the hands is first reflected onto the:

Answers

Pelvic girdle

In human anatomy, the pelvis is a complex of bones that connects the trunk and the legs, supports and balances the trunk, and houses and supports the intestines, the urinary bladder, and the internal organ. It is sometimes referred to as the bony pelvis or the pelvic girdle.
One is located on the left side of the body and the other is located on the right. They come together to make the pelvic girdle, a portion of the pelvis. The hip bones are attached to the upper portion of the skeleton at the sacrum.
The pelvic girdle's main function is to support the upper body's weight while seated and transfer that weight to the lower limbs while standing. For the muscles in the trunk and lower limbs, it functions as attachment point.

To learn more about pelvic girdles please visit -
https://brainly.com/question/24394348

#SPJ4

A stone ‘X’ of mass 2 kg is at the height of 20m in two minutes, calculate the power delivered. [g=10 m/s-2]

Answers

400 J power will be delivered by lifting a stone of mass 2 kg at the height of 20m in two minutes.

What is power?

The quantity of energy transferred or transformed per unit of time is known as power. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as an activity in ancient writings. A scalar quantity is a power.

Work completed and time is linked in the power equation. Since forces may move objects and we know that forces perform work, we might anticipate that by understanding the power, we can gain insight into how a body moves through time. This outcome may be especially beneficial.

Given that, a stone ‘X’ of mass 2 kg is lifted to the height of 20m in two minutes, and g=10 m/s-2

Power Delivered = Work done in lifting the stone

Work Done = Potential energy = mgh

Work done = 2 × 10 × 20

Work done = 400 J

To know more about work done refer to: https://brainly.com/question/10247507

#SPJ1

An astronomy student, for her PhD, really needs to estimate the age of a cluster of stars. Which of the following would be part of the process she would follow

Answers

Plotting what is referred to as an H-R diagram for the stars in the cluster is part of the process in which the astronomy student will follow in this type of scenario.

What is H-R diagram?

This is referred to as the Hertzsprung–Russell diagram and is a scatter plot which depicts the relationships between stars' absolute magnitudes versus their effective temperature. It can also be inferred that the higher the luminosity of a star, the higher the temperature and vice versa.

This helps to depict stellar evolution as a result of the features used as parameters such as the life cycle as an older star will be less luminous when properly studied by people hereby making it easier to estimate the age of stars.

This therefore the reason why plotting a Hertzsprung–Russell diagram is very important.

Read more about Hertzsprung–Russell diagram here https://brainly.com/question/22641110

#SPJ1

Which of the following is an advantage of recorded presentations? A. Start-times and time zones are not a factor. B. Speakers can adapt topic coverage if necessary. C. Audience members have the opportunity to provide feedback D. More visual aids can be used.

Answers

The answer of this is b. Speakers can adapt topic coverage if necessary because I said the answer is b

The statement describes an advantage of recorded presentations is that the audience members have the opportunity to provide feedback. Thus, the correct option for this question is C.

What do you mean by Recorded presentations?

A recorded presentation may be defined as a popular format of multimedia content with a duration of several seconds or minutes that significantly expresses the advantages of a product, service, or any idea with the support of interesting graphic images, concise text, and appropriate narration.

According to the context of this question, a recorded presentation delivers an advantage to the audience to provide feedback. This is because the process of recorded PowerPoint presentation gives the actual sense and understanding to the audience similar to the real event.

Therefore, the correct option for this question is C.

To learn more about Presentation, refer to the link:

https://brainly.com/question/24653274

#SPJ2

It is advisable to place room heater at the ground level for effective heating

Answers

Answer:

yes

Explanation:

The heater is placed near the floor because the air currents move upwards so the hot air fills up the whole room. Whereas, an air conditioner is placed near the ceiling because the cold breeze tends to settle down. If it is placed near the floor then it will fill just the bottom of the room with cool air.

Other Questions
the total cost approach and the differential approach methods of decision analysis ______ provide the same correct answer. an economic order in which those who work with information and knowledge fare best is known as a(n) ________ society. group of answer choices industrial postmodern postindustrial white-collar active mutual funds historically outperform passive mutual funds. false true Which of the following is completely correct? a. The most the company can spend on a video conferencing system is $32000, which is 50 percent of the technology budget for '19. b. The most the company can spend on a video conferencing system is thirty-two thousand, which is fifty percent of the technology budget for two thousand, nineteen c. The most the company can spend on a video conferencing system is $32,000, which is 50 percent of the technology budget for 2019 When baking cookies, I added 3 cups of flour, when the actual amount should have been 2 1/2 cups. Ooops! What is the percent error? 30 points! how many votes are needed to become speaker of the house Georgia has averaged approximately 1% growth year for the last decade. Georgia's population at the end of 2013 was 9,975,592. Based on these facts what will Georgia's population be at the end of 2023? Based on the information provided in the case scenario for Ron and Sandy Peterson, how much, if any, is allowable as a child tax credit for 2022? A) $0 B) $2,000 C) $500 D) $4,000 the first-order conditions for a monopoly to maximize profits are all true except multiple choice dr(q)/dq = dc(q)/dq. d(q)/dq = 0. mr(q) > mc(q). mr(q) = mc(q). resolution proof can provide a value to the query variable(s), as a set of substitutions accumulated during the resolution procedure. T/F In the solvolysis of 2-chloro-2-methylpropane, some di-t-butyl ether is formed. Explain this phenomenon in your own words and show the reaction sequence that represents this, starting with your starting materials. true/false. running water continues to be the major erosive factor of mars today. FILL IN THE BLANK ___ topology is the path messages traverse as they travel between end and central nodes. The measures of two sides of a parallelogram are 50 cm and 80 cm. If one diagonal is 90 cm long, how long is the other diagonal? The similarities between the prison system and the slave trade applied to _____. Surveillance surveillance control control travel by ship travel by ship physical abuse Consider a smooth curve with no undefined points.(a) If it has two relative maximum points, must it have a relative minimum point?(b) If it has two relative extreme points, must it have an inflection point? how many ways are there to assign the tasks if the tasks are all different and there are no restrictions on the number of tasks that can go to any particular processor? which crash recovery policy is usually implemented by today's database systems A function is given by a verbal description. Determine whether it is one-to-one. The function f(t) is the height of a football t seconds after kickoff. O Yes, it is one-to-one. O No, it is not one-to-one. All signatures on a negotiable instrument are guaranteed to be treated as authentic due to what type of warranty?A. Transfer warrantyB. International commerce warrantyC. Principal agent warrantyD. Invoice protection warranty