To get rid of all the non-alphanumeric characters from a string in JavaScript, you can use the JavaScript replace() method. This method will search the string according to the pattern and substitute them with an empty string.
How to remove all non alphanumeric characters from a string in C++?Remove all non alphanumeric characters from a string in C++
The std::remove_if algorithm returns an iterator that indicates where the end should be, which can be passed to the std::erase function. Starting with C++20, consider using the std::erase_if function that is error-free wrapper over the erase-remove idiom.
How to dispose of non alpha characters in Java?Get the string. Split the received string int to an array of String the use of the split() technique of the String category by means of passing the above detailed everyday expression as a parameter to it. This splits the string at each and every non-alphabetical personality and returns all the tokens as a string array.
Learn more about non alpha characters here;
https://brainly.com/question/24183941
#SPJ1
8.How many subnets and host per subnet can you get from the network 172.21.0.0/23?
There can be 8 subnets, with 23 bits being used for the network portion of the address and the remaining 9 bits for the host portion.
What is subnet?The /23 prefix in this situation denotes that the network element of the IP address will take up the first 23 bits, leaving the host portion with the remaining 9 bits.
The number of these bits can be used for the network component must be determined in order to calculate the number of subnets:
The network part already makes use of 23 bits.There can only be two host addresses per subnet if we utilize 24 bits for the network portion and 1 bit for the host portion (all 0s and all 1s are reserved for the network and broadcast addresses, respectively)If we allocate 25 bits to the network piece, there will be 2 bits left over for the host portion, allowing for 2 hosts per subnet ([tex]2^2[/tex] - 2).We can fit [tex]2^3[/tex] - 2 = 6 hosts per subnet if we utilize 26 bits for the network portion and 3 bits for the host portion.If we use 27 bits for the network portion, we will have 4 bits left for the host portion, which will allow for [tex]2^4[/tex] - 2 = 14 hosts per subnetThe number of hosts per subnet will be [tex]2^5[/tex] - 2 = 30 if we use 28 bits for the network section and only have 5 bits remaining for the host portion.The host portion can accommodate 62 hosts per subnet if we utilize 29 bits for the network portion and 6 bits for the host portion.The number of hosts per subnet will be [tex]2^7[/tex] - 2 = 126 if we use 30 bits for the network section and only have 7 bits remaining for the host portion.If we use all 32 bits for the network section, there won't be any bits left for the host portion, meaning the network will occupy the entire address space and there won't be any hosts.Thus, we can create up to 8 subnets from the network 172.21.0.0/23, each with a maximum of 62 usable host addresses ([tex]2^6[/tex] - 2).
For more details regarding subnet, visit:
https://brainly.com/question/15055849
#SPJ9
You want to implement an Ethernet network using the 1000Base-T standard using the minimum hardware specifications possible. Which of the following should you include in your plan? (choose two)
LC Connectors Cat4 twisted pair cables RJ-45 connectors Single-mode fiber optic cable Multi-mode fiber optic cable Cat5e twisted pair cable Cat5 twisted pair cable
To implement an Ethernet network using the 1000Base-T standard using the minimum hardware specifications possible Cat5e Twisted Pair Cable and RJ-45 connectors should be included.
Cable is typically used as the channel for data transmission between network devices. LANs commonly use a variety of various types of cable. The type of cable used for a network depends on its size, topology, and protocol.
Shielded and unshielded twisted pair cables are available. Unshielded twisted pair (UTP), the most widely used and typically the best solution for school networks, is used for 1000BaseT.
Registered Jack, or RJ, denotes that the connector complies with a standard that was derived from the phone industry. According to this specification, a wire is assigned to each pin inside the connector.
The typical connector for unshielded twisted pair wiring is an RJ-45 connector. This connector is made of plastic and resembles a sizable telephone connector. There is only one method to fit an RJ-45 into a slot.
To learn more about Cat5e click here:
brainly.com/question/30059888
#SPJ4
the images show examples of agricultural technology developed during different time periods. which of the following statements is best supported by the images?
The use of agricultural technology has evolved over time to become more efficient and productive.
What is technology
Technology can be broadly defined as the use of scientific knowledge to create tools, systems and processes that solve problems and improve the quality of life. It is an ever-evolving field that encompasses a wide variety of disciplines, including engineering, computer science, artificial intelligence, robotics, biotechnology, nanotechnology, materials science and more. Technology can be used to develop new products, automate processes, increase production, reduce costs, and improve communication. In the modern world, it is impossible to imagine life without technology, as it has become an integral part of our daily lives. Technology has helped us to create a more efficient, productive and safe world, and it is continuously evolving to solve increasingly complex problems.
To know more about technology
https://brainly.com/question/9171028
#SPJ4
Question 1.
In her bid to convey information on the age structure of patients attending a hospital over the years
to the management of the hospital, a bio-statistician at the hospital constructed the multiple bar chart
shown in Figure 1 for the period 2011-2016. The data for each year (201X, where X = 1,2,..., 6)
has the structure shown in Table 1.
60
50
Proportion of age group reporting (%)
0 10 20 30 40
0-4
Table 1: Age distribution.
Age Group
5
15
45
14
44
59
2 60
2011
0-4
2012
2013
2015
Year
Fig 1: Bar chart showing the proportion of each age
group reporting at the hospital from 2011 to 2016
ZUZZIZUZ3
925
901
4213
☐5-14 O 15-44 45-59 >60
Number of Patients
(n.)
153
76
2014
Size of Age Group
in Catchment Area
(N₁)
4675
5762
7253
635
549
2016
Proportion
(n./N,)x100%
19.78
15.63
58.08
23.93
13.84
The values under n,, N, and (n/N, ) x 100% for the above table are not real, they are
presented here for reasons of clarity.
i. Explain why the use of the proportions (n/N) x 100%, i=1,2,... 5, in the construction of
the multiple bar chart is comparatively better than the use of the number of patients, (n.).
Using proportions (n/N) x 100% in the construction of the multiple bar chart is better than using the number of patients (n) for several reasons, as it allows for easy comparison between different age groups and different years.
What is bar chart?In a bar chart, numerical levels of a classified feature are represented by bars. Values are plotted on one axis of the chart, and levels are plotted on the other.
With the numerous bar chart, proportions (n/N) x 100% are preferable to the patient count (n) for a number of reasons.
It enables simple comparisons between various age groups and years.A better way to portray the underlying population is through proportions.Changes in the total number of patients reporting to the hospital have less of an impact on proportions.Generally, using proportions (n/N) x 100% rather than the total number of patients is a more acceptable and effective way to depict the age distribution of patients visiting a hospital over time (n).
Thus, multiple bar chart is better than using the number.
For more details regarding bar graph, visit:
https://brainly.com/question/30443555
#SPJ9
Computer memory exhibits perhaps the widest range of type, technology, organization, performance, and cost of any feature of a computer system. True or False
True. Computer memory exhibits perhaps the widest range of type, technology, organization, performance, and cost of any feature of a computer system.
What is Memory?
Memory is the ability to store and recall information. It is a cognitive process that allows individuals to encode, store, and retrieve information. Memory is essential for many daily activities, such as learning, problem-solving, decision making, and navigating the environment. Memory is the basis for learning and is composed of two distinct processes: encoding and retrieval. Encoding involves taking in and storing information, while retrieval involves recalling the information. Memory can be divided into three main categories: sensory, short-term, and long-term.
To know more about Memory
https://brainly.com/question/30466519
#SPJ4
an azure administrator plans to run a powershell script that creates azure resources you need to recommend which computer configuration to use to run the script solution you run the script from a computor that ryuns windows 10
To run a PowerShell script that creates Azure resources, it is recommended to use a computer that runs Windows 10 with the Azure PowerShell module installed.
This will ensure that the script can access the necessary Azure cmdlets and run correctly. Additionally, the computer should have a stable internet connection to connect to the Azure cloud and create the resources. It is also recommended to have an Azure subscription and the necessary permissions to create resources within the subscription. With these requirements met, the script can be run from the Windows 10 computer to create the desired Azure resources. The computer should have sufficient memory and processing power to handle the creation of Azure resources. This will depend on the complexity of the resources being created and the number of resources being provisioned.
Learn more about PowerShell script here: https://brainly.com/question/29980993
#SPJ11
Which of the following methods can be used for installing the Windows operating system?[Choose all that apply.] - Unattended Installation - Multiboot- Restore/Refresh - Parted Installation - In-place Upgrade
The methods that can be used for installing the Windows operating system are: Unattended Installation, Multiboot, Restore/Refresh, and In-place Upgrade.
Unattended Installation is an automated method that allows you to install Windows without user intervention. Multiboot enables the installation of multiple operating systems on the same computer, giving you the option to choose which to boot at startup. Restore/Refresh allows you to restore your computer to its factory settings or refresh your Windows installation without losing personal files. In-place Upgrade permits upgrading your existing Windows installation to a newer version while preserving personal files, settings, and installed programs. The selection of installation method depends on your specific needs and requirements.
learn more about operating system here:
brainly.com/question/13383612
#SPJ4
compute the natural join of r and s. which of the following tuples is in the resulting relation with schema (a, b, c).
According to the natural join, 100 tuples participate in the join process because A and A are present in R and S. The solution is C 100, as stated.
What is the relational algebraic formula for the natural join?The binary operation known as a "natural join" () is expressed as (r s), where r and s are relations. The set of all combinations of tuples in r and s that are equal on their shared attribute names is the outcome of the natural join.
What happens when you link two relations using the natural join?The attributes in this kind of join should share the same name and domain. There must be at least one shared attribute between two relations for a Natural Join. It conducts equality selection.
To know more about binary visit:-
https://brainly.com/question/19802955
#SPJ4
please help me with this question
Answer:
I believe your answer is B
Explanation:
Select the Account Lockout Policy item that determines how many failed logins can occur on an account before the account is locked.
The Account Lockout Policy item is a security feature in most computer systems that helps prevent unauthorized access to user accounts
What is Account Lockout Policy item?The Account Lockout Policy item is a security feature in most computer systems that helps prevent unauthorized access to user accounts. It specifies how many failed login attempts are allowed before an account is locked out. This feature is designed to protect against brute-force attacks, where an attacker repeatedly tries to guess a user's password until they get it right.
The exact details of the Account Lockout Policy can vary depending on the specific system and its configuration, but in general, the policy includes the following elements:
A threshold for the number of failed login attempts that trigger an account lockout. This threshold is typically set to a small number, such as three or five, to help prevent attackers from making too many attempts.
A duration for which the account is locked out. This can range from a few minutes to several hours or even days, depending on the system's configuration.
An option to unlock the account manually or automatically after the lockout period has expired.
The purpose of the Account Lockout Policy is to prevent attackers from gaining unauthorized access to user accounts by making it more difficult to guess passwords through brute-force attacks. By limiting the number of failed login attempts, the policy makes it harder for attackers to guess passwords by trial and error.
To know more about logins visit:
brainly.com/question/29869447
#SPJ4
you are adding a new rack to your data center, which will house two new blade servers and a new switch. the new servers will be used for file storage and a database server. the only space you have available in the data center is on the opposite side of the room from your existing rack, which already houses several servers, a switch, and a router. you plan to configure a trunk port on each switch and connect them with a crossover utp plenum cable that will run through the suspended tile ceiling in the data center. to provide power for the new devices, you had an electrician install several new 20-amp wall outlets near the new rack. each device on the rack will be plugged directly into one of these new wall outlets. what is wrong with this configuration? (select two.) - No. You must use a cross-over cable to connect the two switches together.
- Yes. This configuration complies with data center best practices.
- No. You should not use blade servers for virtualization.
- No. You should not run a cable across the floor of the data center.
- No. You must implement the UPS and power supplies to the rack externally.
No. You shouldn't cross the data center's floor with a cable.
Which of the aforementioned electrical outlets is intended only for surge protection?A laser printer should only be connected to surge protection outlets or a wall outlet directly. External hard drives, second LED monitors, and inkjet printers should all be plugged into battery backup outlets.
Which of the following components receives client requests and routes them to particular servers?Which of the following components receives client requests and routes them to particular servers? When a client submits a request, a load balancer receives it and distributes it to various servers.
To know more about data center visit:-
https://brainly.com/question/30046513
#SPJ1
If a user's computer becomes infected with a botnet, which of the following can this compromise allow the attacker to do? (Select more than one)
- Launch a mass-mail spam attack
- Establish a connection with a command and control server
- Launch a distributed denial sevrive (DDoS) attack
Botnets can allow attackers to launch spam attacks, DDoS attacks, steal confidential info, and install additional malware.
These allow the attacker to do:
Steal confidential informationInstall additional malwareA botnet is a network of computers infected with malicious software that are used to carry out malicious activities, such as sending spam emails, launching distributed denial of service (DDoS) attacks, stealing confidential information, and installing additional malware.
These activities can be orchestrated from a central command and control server, which gives the attacker full access to the infected computers. As a result, a botnet can be a powerful tool for malicious actors to carry out a range of malicious activities.
Learn more about network: https://brainly.com/question/8118353
#SPJ4
A user hibernates a laptop after giving a video presentation. Now, when it resumes, the display flickers for a moment, but remains blank. A technician suspects a bad graphics processing unit (GPU).
Which of the following troubleshooting steps should be completed? (Select TWO).
Connect an external USB hard drive.
Connect an external display device.
Replace the battery.
Toggle the dual display function key.
Connect an external keyboard and mouse.
When a laptop wakes up from hibernation, the screen may briefly flicker before becoming blank. This might be a sign that the graphics processing unit is malfunctioning (GPU). But, it's advisable to rule out
The production of pictures in a frame buffer intended for output to a display is sped up by the use of a graphics processing unit (GPU), a specialised electrical circuit. High-performance computer applications like video games, picture and video processing, and scientific simulations are where GPUs are most frequently utilised. They allow for the faster and more effective processing of massive volumes of data since they are able to carry out complicated parallel computations in real-time. Typically, a central processing unit (CPU) and a graphics processing unit (GPU) operate together, with the CPU performing general-purpose computing duties and the GPU concentrating on graphics-intensive processes. Nvidia, AMD, and Intel are a few of the top GPU producers.
Learn more about graphics processing here:
https://brainly.com/question/28901112
#SPJ4
fill in the blank. when recovering evidence from a contaminated crime scene, if the temperature in the contaminated room is higher than___degrees, you should take measures to avoid damage to the drive from overheating.
When recovering evidence from a contaminated crime scene, if the temperature in the contaminated room is higher than 40 degrees Celsius (104 degrees Fahrenheit), you should take measures to avoid damage to the drive from overheating.
A contaminated crime scene is a crime scene that has been compromised by the presence of foreign substances, materials, or organisms that could affect the accuracy of the evidence collected. These contaminants can include anything from dust and dirt to chemicals and biological agents. A contaminated crime scene can make it difficult for investigators to determine the facts of the case, and can potentially compromise the integrity of the evidence collected.
When recovering evidence from a contaminated crime scene, if the temperature in the contaminated room is higher than 40 degrees Celsius (104 degrees Fahrenheit), you should take measures to avoid damage to the drive from overheating. This is because high temperatures can cause damage to electronic equipment, including hard drives, and may result in the loss or corruption of important data. It is important to ensure that the equipment is kept within safe temperature ranges during evidence recovery to prevent further damage or loss of crucial evidence.
Here you can learn more about A contaminated crime scene
brainly.com/question/13107465
#SPJ4
Which of the following are examples of digital distuption? (select all that apply, omit those that do not) a) Home Depot & Lowes b) World-Wide-Web c) iPhone d) Coca Cola & Pepsi e) Uber & Lyft On Netflix
has become the greatest media enterprise on the planet. The world's largest bookseller, Amazon, is a software program company. The biggest video service by means of range of subscribers is a software program company: Netflix. Online pure-play is the world's largest advertising business.
What is a digital disruption?Digital disruption is an effect that changes the essential expectations and behaviors in a culture, market, industry or procedure that is caused by, or expressed through, digital capabilities, channels or assets
What are the four D's of disruption?Rapid financial increase and 'the four Ds' of disruption, deprivation, disorder and death: public fitness instructions from nineteenth-century Britain for twenty-first-century China? Trop Med Int Health. 1999 Feb;4(2):146-52. doi: 10.1046/j.
Learn more about examples of digital distuption here;
https://brainly.com/question/13451219
#SPJ1
You would like to control internet access based on users, time of day, and websites visited. Which of the following actions would BEST meet your criteria? Install a proxy server.
The action that would BEST meet your criteria is to Install a proxy server.
What is a proxy server?In order to retrieve data for a user from an Internet source, such as a webpage, a proxy server acts as an intermediary server. They serve as extra data security barriers that guard users from dangerous online behavior. Depending on their setup and nature, proxy servers can be used for a wide range of purposes.
Therefore, An intermediary proxy server serves as your connection to the internet. End consumers are separated from the websites they visit by an intermediary server. There are many levels of functionality, security, and privacy offered by proxy servers.
Learn more about proxy server from
https://brainly.com/question/28232298
#SPJ1
Draw an ERD for the following situation: ShinyShoesForAll (SSFA) is a small shoe repair shop located in a suburban town in the Boston area. SSFA repairs shoes, bags, wallets, luggage, and other similar items. The store wants to track the categories to which a customer belongs. SSFA also needs each customer’s name and phone number. A job at SSFA is initiated when a customer brings an item or a set of items to be repaired to the shop. At that time, an SSFA employee evaluates the condition of the items to be repaired and gives a separate estimate of the repair cost for each item. The employee also estimates the completion date for the entire job. Each of the items to be repaired will be classified into one of the many item types (such as shoes, luggage, etc.); it should be possible and easy to create new item types even before any item is assigned to a type and to remember previous item types when no item in the database is currently of that type. At the time when a repair job is completed, the system should allow the completion date to be recorded as well as the date when the order is picked up. If a customer has comments regarding the job, it should be possible to capture them in the system. Draw an E-R diagram for this situation.
Remember to use entity relationships, do not use bubble maps
The ERD for this situation would have the following entities: Customer, Job, Item Type, Repair Item, Comment. Customer and Job would have a one-to-many relationship, as a customer can have multiple jobs.
Job and Repair Item would have a one-to-many relationship, as each job can have multiple repair items. Repair Item and Item Type would have a many-to-one relationship, as multiple repair items can be classified into one item type. Job and Comment would have a one-to-many relationship, as each job can have multiple comments. The attributes for each entity would include Customer Name, Phone Number, Job Evaluation Date, Item Evaluation Date, Repair Cost Estimate, Completion Date Estimate, Completion Date, Pick Up Date, and Comment.To know more about ERD diagram visit:
https://brainly.com/question/30409330
#SPJ1
Your router has the following IP address on Ethernet0: 172.16.2.1/23. Which of the following can be valid host IDs on the LAN interface attached to the router?
172.16.1.100
172.16.1.198
172.16.2.255
172.16.3.0
A. 1 only
B. 2 and 3 only
C. 3 and 4 only
D. None of the above
Therefore, the answer is option B. 2 and 3 only are valid host IDs on the LAN interface attached to the router.
What is IP address?An IP (Internet Protocol) address is a unique numerical identifier assigned to devices on a computer network. It is used to identify and communicate with devices on the network. IP addresses are typically represented in a dotted decimal notation, where the address is divided into four sets of numbers separated by periods. Each set of numbers can range from 0 to 255, representing a total of 4,294,967,296 unique addresses in the IPv4 protocol.
Here,
The given IP address, 172.16.2.1/23, means that the first 23 bits of the IP address represent the network address and the remaining 9 bits represent the host address. The subnet mask for this network is 255.255.254.0.
To determine the valid host IDs on the LAN interface attached to the router, we need to consider the range of IP addresses that are part of the same subnet as the router's LAN interface.
The network address for the subnet is obtained by setting all the host bits to 0. In this case, the network address is 172.16.2.0.
The broadcast address for the subnet is obtained by setting all the host bits to 1. In this case, the broadcast address is 172.16.3.255.
Therefore, the valid host IDs on the LAN interface attached to the router are the IP addresses between the network address and the broadcast address, excluding the network and broadcast addresses themselves.
So, out of the given options:
172.16.1.100 is not a valid host ID because it is not part of the same subnet as the router's LAN interface.
172.16.1.198 is not a valid host ID because it is not part of the same subnet as the router's LAN interface.
172.16.2.255 is a valid host ID.
172.16.3.0 is not a valid host ID because it is the network address of the next subnet.
Therefore, the answer is option B. 2 and 3 only are valid host IDs on the LAN interface attached to the router.
To know more about IP address,
https://brainly.com/question/16011753
#SPJ4
Problem 1: Newton-Raphson Method Problem Statement Develop a MATLAB function named newtonRaphsonMethod that finds the root of an arbitrary function of a single variable using the Newton-Raphson method. Your function should take the following arguments in this order: the function handle for the function to be solved, the function handle for the derivative of the function to be solved, the initial guess, the error tolerance, and the maximum number of iterations to be performed. Your function should return the following values, in this order: the root, the value of the function evaluated at the root, the estimated error, and the number of iterations used. Test your function on simple functions such as
f(x)=x 2 −3x+2
Write a MATLAB function newtonRaphsonMethod that uses the Newton-Raphson method to find the root of a given function along with its derivative using an initial guess, error tolerance, and maximum iterations.
The challenge calls for the creation of a MATLAB programme that applies the Newton-Raphson formula to determine the origin of any function with a single variable. It is recommended that the function accept inputs for the function, its derivative, the starting guess, error tolerance, and the maximum number of repetitions. It ought to provide back the root, the value of the function at the root, the predicted error, and the total number of iterations. Simple functions like f(x) = x2 - 3x + 2 can be used to test the function.
learn more about Newton-Raphson formula here:
https://brainly.com/question/13263124
#SPJ4
nsa has identified what they call the first principles of cybersecurity. the following list three of these: principle last name starts with domain separation a through h simplicity of design i through q minimization r through z for your discussion, describe the principle assigned to the first letter in your last name (in the above table). include practical examples of the concepts. your post must display your understanding of the topic beyond the simple description.
Domain separation is used to separate processes, data, and other administrative tasks into different domains. This allows many customers to reside on the instance. This is especially important from a security perspective.
What is the Cybersecurity Principle of Minimization?Practical example of minimization principle is data minimization. Data minimization is a direct way to limit privacy leaks. The principle of data minimization involves limiting data collection to only what is necessary to achieve a specific purpose. The less data to collects, stores and shares on devices, the easier it is for users to protect their personal information. Example of Data minimization: The collection of biometric data as part of fingerprint checks at building entrances is intended to prevent entry by unauthorized persons. What does simplicity of design mean?Simplicity is a design principle that states that designs should be as simple as possible without sacrificing functionality or usability. This means that designers should eliminate unnecessary elements from their designs and focus on creating a clean and simple user experience.
What is Domain Separation in Cybersecurity?In computer, the word Domain Separation represents a set of data or instructions worthy of protection. Outside the computer, domains can be areas of responsibility or control. Separating a domain allows you to apply rules governing access to and use of the domain by entities outside the domain.
To learn more about Cybersecurity visit:
https://brainly.com/question/27560386
#SPJ4
NSA has identified what they call the First Principles of cybersecurity. The following List three of these: Principle Last Name Starts With Domain Separation A through H Simplicity of Design I through Q Minimization R through Z For your discussion, describe the principle assigned to the first letter in your last name (in the above table). Include practical examples of the concepts. Your post must display your understanding of the topic beyond the simple description.
Question 3: Ask user to enter a list containing a mix of integers and float values. Find the sum, min and max of values within the list. Delete the minimum value in the original list to create a new list, but make sure the original list remains unchanged. An output example:Enter a list : (10, 0.1, 20.0, 11, 12.3, 30, 23, 33)max : 33min : 0.1sum :139.4The original list : (10, 0.1, 20.0, 11, 12.3, 30, 23, 33)The new list : (10, 20.0, 11, 12.3, 30, 23, 33)
Program in python to add the values of a list, find the minimum and maximum and print them on the screen. The output image of the algorithm and the code are attached.
Python codeif __name__ == '__main__':
# Define variables
original_list = float()
new_list = float()
original_list = [float() for ind0 in range(8)]
new_list = [float() for ind0 in range(8)]
sum = 0
maxi = 0
mini = 900000
# Entry dataprint("Find the sum, min and max of values within the list")
print("Enter integers and float values: ")
for x in range(1,9):
original_list[x-1] = float(input())
# Maximum of value within listif original_list[x-1]>maxi:
maxi = original_list[x-1]
# Minimum of value within listif original_list[x-1]<mini:
mini = original_list[x-1]
# Sum of the values within the listsum = sum+original_list[x-1]
# Deleting the minimum value in the original list to create a new listb = 0
for a in range(1,9):
if original_list[a-1]!=mini:
b = b+1
new_list[b-1] = original_list[a-1]
# Outputprint("Max: ",maxi)
print("Min: ",mini)
print("Sum: ",sum)
print("The original list: ")
for x in range(1,9):
print(original_list[x-1]," ", end="")
print(" ")
print("The new list: ")
for x in range(1,8):
print(new_list[x-1]," ", end="")
print(" ")
To learn more about find values from list in python see: https://brainly.com/question/24941798
#SPJ4
the digital certificate on the dion training web server is about to expire. which of the following should jason submit to the ca to renew the server's certificate?
Jason needs to send a certificate renewal request to the certificate authority (CA) that granted the initial certificate in order to renew the digital certificate on the Dion training web server.
An existing agreement, contract, licence, subscription, or other formal document or commitment is renewed by extending or modifying it. In several industries, including business, banking, law, and technology, renewal is a widespread practise. A business might decide to renew an insurance policy, a software licence, or a contract with a supplier, for instance. Renewal normally entails a study and negotiation of the previous document's terms and conditions, as well as any necessary revisions or modifications. Depending on the circumstances, the renewal procedure may call for the provision of fresh evidence, payments, or other kinds of proof. Effective renewal procedures are essential for preserving positive interactions and preventing operational problems.
Learn more about renew here:
https://brainly.com/question/23576866
#SPJ4
Question Match the error to its definition Time Running Hide [ Choose ] This type of error is created when the programmer breaks the structure rules of the language. Syntax This type of error is created when a programming statement is formed correctly, but it is not built from the correct This type of error usually occurs during run-time when correctly formed statements do exactly what the programmer Context This type of error is created Semantic This type of error usually occ
Semantic errors(context) are errors that happen when the compiler is unable to comprehend the written code. Runtime errors are software flaws or issues that the program's developers were aware of but were unable to resolve.
Programmers that make typographical or improper typing errors also make syntax errors. A C language error is a problem that develops in a programme and prevents it from functioning as intended or from compiling altogether. If a programme has an error, one of the following three things could happen: the code won't compile, the programme won't run, or the programme will produce erroneous data or trash values.
In C programming, there are five different kinds of errors: syntax errors, run-time errors, logical errors, semantic problems, and linker errors.
In other words, a programmer makes a syntax error when they deviate from the set of guidelines established for the C language's syntax.
Runtime errors are software flaws or issues that the program's developers were aware of but were unable to resolve.
Sometimes, even after a program has been built and run, we may not get the desired outcomes. Despite the code seeming to be error-free, the outcome is not what was expected. This class of problems is known as logical flaws.
When the compiler cannot understand the written code, faults called semantic errors to occur. It is comparable to using the wrong word in the wrong situation when speaking English. For instance, adding text to an integer will lead to a semantic error.
To learn more about errors click here:
brainly.com/question/14466946
#SPJ4
the class person.java is available on canvas based on the following design document. type the corresponding java statements in persontester.java that answer the following question then submit persontester.java on canvas.
the code is as follows:
// Person.java
public class Person {
private String name;
private int age;
public Person(String name, int age) {
this.name = name;
this.age = age;
}
public String getName(){
return this.name;
}
public int getAge(){
return this.age;
}
}
// PersonTester.java
public class PersonTester {
public static void main(String[] args) {
Person person1 = new Person("Jane", 25);
Person person2 = new Person("John", 30);
System.out.println("The first person's name is " + person1.getName() +
" and the person's age is " + person1.getAge());
System.out.println("The second person's name is " + person2.getName() +
" and the person's age is " + person2.getAge());
}
}
learn more about java at :
https://brainly.com/question/29897053
#SPJ4
private string name private int birthyear public person( ) public person(string name, int birthyear) public string getname( ) public int getbirthyear() public void setname(string name) public void setbirthyear(int birthyear) public int calculateage(int currentyr) public boolean equals(person p) public string tostring( )
These lines of code depict the "person" class, which has the properties "name" and "birthyear," as well as the methods "getname()," "getbirthyear()," "setname(string name)," and "setbirthyear(int birthyear)."
Explain what a string is?In programming, a string is a form of data that is employed to data type rather than integers. A string, which is a group of characters, can contain letters, number, symbols, and even spaces.
A string value is what?A string variable is nothing more than a group of characters, such as "abc." Quotes are always used around a string value. All character kinds are accepted (even digits, as in "abc123" ). Any character count is allowed for strings. The null string is a string containing exactly zero characters; it is represented by the symbol "".
To know more about string visit:
https://brainly.com/question/15231163
#SPJ4
write the following c code sequence in mips/risc-v assembly: note that ( ) are used for [ ]. char m(8), n(8); for (i
RISC-V assembly code would only have slight syntactic alterations and different register names. The main concept is to use the loop variable I to get the address of each element in the arrays m and n, load the values, add them up, and then put the result back in m[i]. When I = 0 to 7, the loop repeats eight times.
The assembly languages used for the MIPS and RISC-V architectures, respectively, are referred to as MIPS/RISC-V assembly. A low-level programming language called assembly uses mnemonic codes to express machine instructions and is unique to a particular computer architecture. Reduced Instruction Set Computing (RISC) architectures like MIPS and RISC-V are made for effective and quick processing. Reverse engineering, creating device drivers, and system programming all employ assembly language code for these architectures. Understanding the computer architecture deeply and being skilled in low-level programming and debugging techniques are prerequisites for learning MIPS/RISC-V assembly. MIPS/RISC-V assembly expertise can result in faster, more effective, and optimised code.
Learn more about "MIPS/RISC-V assembly." here:
https://brainly.com/question/14300885
#SPJ4
true/false. according to the zippo standard, websites that provide information but do not provide the opportunity to conduct online transactions are deemed to be passive and they create personal jurisdiction over the defendant company that operates the site.
False. In situations involving websites, the Zippo standard is a test used to determine personal jurisdiction. It was created in the case of Zippo Manufacturing Co. v. Zippo Dot Com, Inc.
In issues involving websites, U.S. courts apply the Zippo standard test to decide personal jurisdiction. The U.S. Court of Appeals for the Third Circuit set the standard in the case of Zippo Manufacturing Co. v. Zippo Dot Com, Inc. (1997). According to the Zippo standard, websites can be divided into three categories: completely passive, completely interactive, and partially interactive. To assess the strength of personal jurisdiction, the standard looks at the website's level of engagement, commercial nature, and volume of transactions made there. Courts all throughout the United States apply the Zippo standard, which has gained widespread acceptance, to decide whether a defendant can be sued in a specific jurisdiction based on their website.
Learn more about Zippo standard here:
https://brainly.com/question/30611662
#SPJ4
valarante child game.... look to cartoon grapfix to make kid player happy like children show.. valarante cartoon world with rainbow unlike counter strike chad with dark corridorr and raelistic gun.. valarante like playhouse. valarant playor run from csgo fear of dark world and realism
It's important to note that Valorant and Counter-Strike: Global Offensive (CSGO) are both first-person shooter games designed for mature audiences.
What is computer design?Computer design is the process of creating a computer system, including its architecture, components, and software, that meets specific requirements and objectives. It involves designing the hardware, software, and firmware components of a computer system, including the central processing unit (CPU), memory, storage, input/output devices, and other peripheral components, as well as the operating system and application software that run on the system. Computer design is a complex and iterative process that requires expertise in computer science, electrical engineering, and other related fields.
Here,
While it may be tempting to try and modify these games to be more child-friendly, it's not advisable to expose young children to the violence and mature themes that are inherent to these games. Additionally, modifying the game in any way could potentially be a violation of the game's terms of service and could result in consequences such as account bans or legal action.
Instead of modifying existing games, there are many child-friendly games with cartoon graphics that are specifically designed for young children.
To know more about computer design,
https://brainly.com/question/17219206
#SPJ4
Provide a counterexample to the following statement: The number n is an even integer if an only if 3n + 2 is an even integer.
3n + 2 = 3(2k)+2=6k + 2 = 2(3k + 1). Since 3k + 1 is an integer, 3n + 2 must be even by definition, and since 3n + 2 is not odd, it follows that 3n + 2 is an integer. This completes the indirect evidence that was being made.
How can you demonstrate that 3n must be even if n is an integer?Let's assume that n is even. When n = 2k, there exists an integer k in which this is true. Therefore, 3n = 3(2k) = 2. (3k). 3n must be even because 3k is an integer.
Which method of proof is used to demonstrate that "n is divisible by 3 for any positive integer n N3"?Let P(n) be the statement "n3n is divisible by 3 whenever n is a positive integer" as a solution. Basic Action: Because 131=0 is divisible by 3, the assertion P(1) is accurate. The initial phase is now finished. Assume that P(k), which states that k3k is divisible by 3, is true.
To know more about integer visit:-
https://brainly.com/question/28454591
#SPJ4
(a) Write the getHighestYield method, which returns the Plot object with the highest yield among the plots in farmPlots with the crop type specified by the parameter c. If more than one plot has the highest yield, any of these plots may be returned. If no plot exists containing the specified type of crop, the method returns null.
Assume that the ExperimentalFarm object f has been created such that its farmPlots array contains the following cropType and cropYield values.
The figure presents a two-dimensional array of Plot objects with 3 columns and 4 rows. The columns are labeled from 0 to 2, and the rows are labeled from 0 to 3. Each plot is labeled with a crop name and crop yield as follows. Row 0. Column 0, "Corn" 20. Column 1, "Corn" 30. Column 2, "Peas" 10. Row 1. Column 0, "Peas" 30. Column 1, "Corn" 40. Column 2, "Corn" 62. Row 2. Column 0, "Wheat" 10. Column 1, "Corn" 50. Column 2, "Rice" 30. Row 3. Column 0, "Corn" 55, Column 1, "Corn" 30. Column 2, "Peas" 30.
The following are some examples of the behavior of the getHighestYield method.
Method Call Return Value
f.getHighestYield("corn") farmPlots[1][3]
f.getHighestYield("peas") farmPlots[1][0] or farmPlots[3][2]
f.getHighestYield("bananas") null
Write the getHighestYield method below.
/** Returns the plot with the highest yield for a given crop type, as described in part (a). */
public Plot getHighestYield(String c)
The Experimental Farm object f has been created such that its farm Plots array contains the following crop Type and crop Yield values.
What is Program?A program is a predetermined set of instructions for a computer to execute in computing. The programme in the modern computer that J. Hermann von Neumann proposed in 1945 contains a sequence of instructions that the computer follows one at a time.
The program is typically stored in a location that is accessible to the computer. The computer receives one instruction, executes it, and then receives the subsequent instruction. The data on which the instruction operates can also be stored in the storage area or memory. Note that a programme is another unique type of data that describes how to operate an application or user data.
Program
Plot.java
/**
* Create a class plot
* attributes of crop type and yield
* Parametrized constructor assign values to attributes
* Getter to get attribute values
* author deept
*
*/
public class Plot {
//Attributes
private String cropType;
private int cropYield;
//Constructor
public Plot(String crop, int yield) {
cropType=crop;
cropYield=yield;
}
//Getters
public String getCropType() {
return cropType;
}
public int getCropYield() {
return cropYield;
}
}
ExperimentalFarm.java
/**
* Create a plot test class
* author deept
*
*/
public class ExperimentalFarm {
//Create a plot with different crops
Plot[][] farmPlots=new Plot[][] {
{new Plot("corn",20),new Plot("corn",30),new Plot("peas",10)},
{new Plot("peas",30),new Plot("corn",40),new Plot("corn",62)},
{new Plot("wheat",10),new Plot("corn",50),new Plot("rice",30)},
{new Plot("corn",55),new Plot("corn",30),new Plot("peas",30)}
};
/** Returns true if all plots in a given column in the two-dimensional array farmPlots
* contain the same type of crop, or false otherwise, as described in part (b)
*/
public boolean sameCrop(int col) {
if(col<farmPlots[0].length && col>=0) {
String cropName=farmPlots[0][col].getCropType();
for(int i=1;i<farmPlots.length;i++) {
if(!cropName.equalsIgnoreCase(farmPlots[i][col].getCropType())) {
return false;
}
}
return true;
}
return true;
}
//Main method
public static void main(String[] args) {
//Create an object of class
ExperimentalFarm f=new ExperimentalFarm();
//2test cases
if(f.sameCrop(0)) {
System.out.println("All crops in column0 same");
}
else {
System.out.println("All crops in column0 not same");
}
if(f.sameCrop(1)) {
System.out.println("All crops in column1 same");
}
else {
System.out.println("All crops in column0 not same");
}
}
}
-------------------------------------------
output
All crops in column0 not same
All crops in column1 same
Learn more about Program
https://brainly.com/question/3224396
#SPJ1