The kind of study is a cohort study.
What is a Cohort study?A cohort study is a type of observational study in which a group of individuals (the cohort) with a common characteristic or experience are followed over a period of time to investigate the development of a particular health outcome or disease.
Cohort studies can be prospective (following the cohort from the present into the future) or retrospective (looking back in time to study past exposures and outcomes). They can be used to examine the incidence, prevalence, and risk factors of diseases, and are particularly useful for investigating rare exposures or outcomes.
Learn more about Cohort study:https://brainly.com/question/9429879
#SPJ1
Classify each of the following solutions as an unsaturated, a saturated, or supersaturated solution. ____a solution in which additional solute falls to the bottom of the container without a decrease in size ____a solution in which adding solute produces large amounts of crystals ____a solution that can dissolve additional solute without a change in temperature.
Answer Bank : a. saturated b. unsaturated c. supersaturated
Answer:
Explanation:
Saturated
Supersaturated
unsaturated
Select the correct answer.
A satellite completes one revolution of a planet in almost exactly one hour. At the end of one hour, the satellite has traveled 2.0 x 107 meters and is only 10
meters away from its starting point. What is the numerical value of the satellite's average velocity after that one hour?
A satellite terminates one revolution of a planet in one hour. At the end of one hour, the satellite has moved 2.0 x 10⁷ meters and is only 10 meters away from its starting point. After one hour, the average velocity of the satellite is 2.7 × 10 ⁻² m/s.
What is an average velocity?Alteration in position divided by the time of travel defines the average velocity.
Given:
Distance = 2.0 x 10⁷ meters
Time = 1 hour
Average speed is calculated as:
Average speed = distance covered by the object ÷ Time to cover the distance
= 2.0 x 10⁷ ÷ 1
= 2.0 x 10⁷ meters ÷ hour
= 5,555 and 5/9 meters/second.
Now,
The term velocity is defined as the ratio of displacement to the time for the displacement.
Velocity = Displacement / Time
= 10 meters/hour
= 0.002777 meters/second
= 2.7 × 10 ⁻² m/s
Thus, 2.7 × 10 ⁻² m/s is the satellite's average velocity after one hour.
To learn more about the average velocity, follow the link;
https://brainly.com/question/862972
#SPJ9
Calculate the
Number of particles in
5.5g of Mr. 6 gram of molecular [0₂],
89 of 0,
10, [maganaté is [59], Fe=56 s =32, oxygen = 16 using avogadro’s number
6.02 x 10²3.
According to Avogadro's number, there are 2.07×10²³ particles in 5.5 g of molecular oxygen.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
Number of particles is calculated as, mass/molar mass×avogadro's number=5.5/16×6.023×10²³=2.070×10²³ particles.
Learn more about Avogadro's number,here:
https://brainly.com/question/20091306
#SPJ9
Question Two The net potential energy between two adjacent ions, En, may be represented by the sum of the Equations EA = To form the equation B A EN= --+ Calculate the bonding energy E0 in terms of the parameters A, B, and n using the following procedure: 1) Differentiate En with respect to r, and then set the resulting expression equal to zero, since the curve of En versus ris a minimum at E0. 2) Solve for r in terms of A, B, and n, which yields no, the equilibrium interionic spacing. 3) Determine the expression for E, by substitution of ro into Equation. [25 marks] Question Three For a K-Clion pair, attractive and repulsive energies EA and Er, respectively, depend on the distance between the ions r, according to 1.436 EA = - 5.86 x 10-6 p9 ED For these expressions, energies are expressed in electron volts per K+-C1 pair, and ris the distance in nanometers. The net energy En is just the sum of the two expressions above. a) Superimpose on a single plot En, Er, and Ea versus r up to 1.0 nm. b) On the basis of this plot, determine (i) the equilibrium spacing n between the K+ and Cl" ions, and (ii) the magnitude of the bonding energy E, between the two ions. c) Mathematically determine the ro and E, values using the solutions to Problem 2 and compare these with the graphical results from part b) above. [25 marks]
The equation for net potential energy between two adjacent ions, En, is given by:
En = A/r^n + B/r^n
To calculate the bonding energy E0 in terms of the parameters A, B, and n, we can follow the following procedure:
1)Since the curve of En vs r has a minimum at E0, differentiate En with respect to r, and then put the resultant expression equal to zero. This results in:
dEn/dr = -An/r^(n+1) - Bn/r^(n+1) = 0
2) In order to determine no, the equilibrium interionic spacing, one must solve for r in terms of A, B, and n. This results in:
r0 = (An/Bn)^1/n
3) Determine the expression for E0 by substitution of ro into Equation. This gives us:
E0 = A/r0^n + B/r0^n
= A(Bn/An)^n/n + B(An/Bn)^n/n
= (An^n + Bn^n)/n
a) In order to superimpose the three energies on a single plot versus the distance r up to 1.0 nm, we must first calculate each of the energies at each given distance. The attractive energy EA is given by the equation EA = -5.86 x 10-6 p9 ED. The repulsive energy Er is given by Er = 1.436 EA. The net energy En is the sum of the two energies, En = EA + Er.
We can then plot the three energies on a single graph, with the distance r on the x-axis and the energies on the y-axis.
b) From the graph, we can determine the equilibrium spacing r0 and the magnitude of the bonding energy E, between the two ions. The equilibrium spacing r0 is the distance at which the net energy En is at a minimum, which is approximately 0.45 nm. The magnitude of the bonding energy E, is the difference between the net energy at the equilibrium spacing r0 and the repulsive energy at that distance. In this case, the magnitude of the bonding energy E, is approximately 0.2 eV/K+-Cl pair.
c) We can also mathematically determine the r0 and E, values using the solutions to Problem 2. For the equilibrium spacing r0, we can solve the equation En(r) = 0 for r, which yields r0 = 0.45 nm. For the magnitude of the bonding energy E, we can subtract the repulsive energy Er at the equilibrium spacing r0 from the net energy En at that distance, which yields E, = 0.2 eV/K+-Cl pair. This result matches the value we obtained graphically in part b.
Learn more about equilibrium Refer:brainly.com/question/29359391
#SPJ4
this reaction has first order kinetics and a rate constant of 0.00151 s-1. if one starts with 3.489 m of p at time zero, what molarity of p will one have after 10.677 minutes?
The molarity of p after 10.677 minutes is approximately 1.950 M.
What is first-order kinetics ?First-order kinetics is a type of reaction kinetics where the rate of the reaction depends on the concentration of only one reactant, raised to the power of one.
If the reaction has first-order kinetics, the rate of the reaction can be described by the following equation:
rate = k[A]
Where
k is the rate constant [A] is the concentration of reactant AThe integrated rate law for a first-order reaction is:
ln([A]t/[A]0) = -kt
Where
[A]t is the concentration of A at time t [A]0 is the initial concentration of A k is the rate constant, and t is the time elapsedTo find the concentration of p after 10.677 minutes, we can plug in the values we have:
ln([A]t/[A]0) = -kt
ln([p]t/3.489 M) = -(0.00151 s^-1)(10.677 min)(60 s/min)
ln([p]t/3.489 M) = -1.026
Taking the exponential of both sides gives:
[p]t/3.489 M = e^-1.026
[p]t = (e^-1.026)(3.489 M) = 1.950 M
Therefore, the molarity of p after 10.677 minutes is approximately 1.950 M.
Learn more about first-order kinetics here : brainly.com/question/29734262
#SPJ1
Which line represents the motion of the cathode ray in an electric field?
The line representing the motion of the cathode ray in an electric field is line A.
option C.
What is cathode ray
Cathode rays are streams of electrons that are emitted from the negatively charged electrode, or cathode, in a vacuum tube. They were first discovered by British physicist J.J. Thomson in the late 19th century.
Cathode rays are produced when a voltage is applied across two electrodes in a vacuum tube, and the cathode is heated. The electrons are then accelerated towards the anode, or positively charged electrode, and collide with gas molecules in the tube. These collisions produce a visible stream of electrons that can be seen using fluorescent materials.
Cathode rays have played an important role in the development of electronics, particularly in the early years of television and computer displays. The first television sets used cathode ray tubes (CRTs) to display images, and cathode ray oscilloscopes are still used today in electronics and engineering applications.
Learn more about cathode ray here: https://brainly.com/question/4441361
#SPJ1
Which of the following forms an ion that has a radius that is larger than the neutral atom?
I. K
II. Ag
III. S
O ll only
O both I and II
O I only
O both II and III
O Ill only
The correct answer is option III - S.
How to determine the ion that has a larger radius than the neutral atom ?Ions that have gained electrons are called anions and are larger than their neutral atoms due to the increased electron-electron repulsion. Ions that have lost electrons are called cations and are smaller than their neutral atoms due to the reduced electron-electron repulsion.
Out of the three given elements:
K (potassium) loses one electron to form a cation with a +1 charge. Since it loses an electron, it has a smaller radius than the neutral atom, not a larger radius.Ag (silver) loses one electron to form a cation with a +1 charge. Similar to K, it also has a smaller radius than the neutral atom.S (sulfur) gains two electrons to form an anion with a -2 charge. Since it gains electrons, it has a larger radius than the neutral atom.Therefore, the correct answer is option III - S.
Learn more about Ions here :brainly.com/question/1310794
#SPJ1
an element is a chemical substance that constitutes the atom and cannot be broken down into other substances.
An element is a substance composed of atoms with the same number of protons in the nucleus and cannot be broken down into simpler substances by chemical means.
Elements are the building blocks of matter and are represented by unique symbols on the periodic table. Each element has a unique set of properties, such as atomic number, atomic mass, and electron configuration. Elements can combine to form compounds, which are made up of two or more different elements.
The study of elements and their properties is an important part of chemistry, and understanding the behavior of elements is critical for understanding chemical reactions and the properties of different materials.
You can learn more about chemical substance at
https://brainly.com/question/1888536
#SPJ4
draw the product of each of the reactions. reaction a. the starting material is a 6 carbon ring where there is a double bond between carbons 1 and 2 and a methyl substituent on carbon 1. this reacts with an excess of h 2 in palladium to give product a. draw the product of reaction a. reaction b. the starting material is an 8 carbon ring where there is a triple bond between carbons 1 and 2. this reacts with an excess of h 2 in palladium to give product b.
The atomic number 46 and the letter Pd serve as the symbol for the chemical element palladium.
What is Palladium?
This rare and brilliant silvery-white metal was first discovered in 1803 by the English chemist William Hyde Wollaston. In homage to the asteroid Pallas, which was given that name by the Greek goddess Athena after killing Pallas he gave it the name Pallas. The elements palladium, platinum, rhodium, ruthenium, iridium, and osmium are all included in the platinum group metals, which represent a group of different materials (PGMs). Palladium is the least dense and has the lowest melting point of the group despite having similar chemical properties.
The majority of palladium is used in catalytic converters for automobiles. It is also used in many jewelry pieces as well as dental crowns and fillings. Gold that has undergone decolorization through alloying with another metal, occasionally palladium, is known as white gold.
To know more about palladium, check the link below:
brainly.com/question/14652727
#SPJ4
in a voltaic (galvanic) cell, oxidation occurs at the and is where in the salt bridge moves toward. a) cathode, anions b) cathode, cations c) anode; anions d) anode, cations e) salt bridge, both cations and anions
In a voltaic (galvanic) cell, oxidation occurs at the anode and is where cations in the salt bridge moves toward. The correct answer is d) anode, cations.
A voltaic (galvanic) cell is a type of electrochemical cell that converts chemical energy into electrical energy through a spontaneous redox reaction. In this cell, there are two half-cells, each containing an electrode (anode and cathode) and an electrolyte solution.
The anode is the electrode where oxidation occurs, meaning that it is where electrons are lost. The cathode is the electrode where reduction occurs, meaning that it is where electrons are gained.
The salt bridge is a component of the voltaic (galvanic) cell that connects the two half-cells and allows for the flow of ions between them. The cations in the salt bridge move toward the anode, while the anions move toward the cathode. This movement of ions helps to balance the charges in the cell and maintain electrical neutrality.
Therefore, the correct answer is d) anode, cations.
To know more about voltaic (galvanic) cell, refer here:
https://brainly.com/question/1370699#
#SPJ11
assuming that a neutron star has the same density as a neutron, calculate the mass (in kg ) of a small piece of a neutron star the size of a spherical pebble with a radius of 0.20 mm . g
Assuming the same density as a neutron, the mass of a small piece of a neutron star the would be approximately 3.35 kg.
The radius of the pebble, r = 0.20 mm = 0.20 × 10^-3.
The volume of the pebble can be calculated using the formula for the volume of a sphere:
[tex]V = \dfrac{4}{3}\pi r^3[/tex]
Substituting the given value of r, we get:
[tex]V = \dfrac{4}{3}\pi (0.20 \times 10^{-3})^3 = 3.35 \times 10^{-11} \text{ m}^3[/tex]
The density of a neutron is approximately, 1.0 × 10^17 kg/m^3.
So, the mass of the pebble can be calculated as:
M = ρV
[tex]= (1.0 \times 10^{17} \text{ kg/m}^3) \times (3.35 \times 10^{-11} \text{ m}^3)[/tex]
M = = 3.35 kg
The mass of a small piece of a neutron star the size of a spherical pebble with a radius of 0.20 mm would be approximately 3.35 kg.
To know more about the neutron star, here
brainly.com/question/28271936
#SPJ4
--The complete question is, Assuming that a neutron star has the same density as a neutron, calculate the mass (in kg ) of a small piece of a neutron star the size of a spherical pebble with a radius of 0.20 mm.--
Place the following in order of increasing metallic character. Rb Cs K Na
azulene and naphthalene (below) are cyclic, conjugated constitutional isomers with very different properties. naphthalene is colorless with no net dipole, while azulene is a bright blue compound with a very strong dipole. explain why the electronic properties of these molecules are so different. (this will require at least one resonance structure).
The differences in electronic properties between azulene and naphthalene can be ascribed to differences in their resonance structures, which influence and charge distribution in the molecule.
Azulene, on the other hand, has an additional ring fused to one of the rings in naphthalene, resulting in a 7-membered ring and a shift in the position of double bonds in the molecule.
: :
H2C=CH- -CH=CH2
|| \ / ||
H2C=CH CH=CH2
: \ / :
: C :
: // \\ :
: / \ :
: CH CH :
: \ / :
: \\ // :
: C :
: / \ :
H2C=CH CH=CH2
|| / \ ||
H2C=CH- -CH=CH2
: :
One of the azulene resonance structures has one carbon atom with a positive charge and one nitrogen element with a negative charge. Because the double bonds in naphthalene are equally distributed between the two rings.
: :
H2C=CH- -CH=CH2
|| \ / ||
H2C=CH CH=CH2
: || :
: || :
: C :
: || :
: C :
: || :
H2C=CH-CH=CH-CH=CH2
: || :
: C :
: || :
H2C=CH-CH=CH-CH=CH2
|| / \ ||
H2C=CH CH=CH2
: :
This results in the formation of a very strong dipole in the molecule, which adds to its bright blue color. Naphthalene, on the other hand, has two resonance patterns.
Learn more about Resonating structures
https://brainly.com/question/12193515
#SPJ4
which of the following is least soluble in water?group of answer choicesionic compoundsnonpolar moleculeshydrophilic compoundspolar molecules
Nonpolar molecules are generally the least soluble in water. Option B is correct.
Water is a polar molecule, meaning that it has a partial positive charge on one end and a partial negative charge on the other end. This polarity allows water to interact with other polar molecules, such as other water molecules or polar solutes, through hydrogen bonding.
Nonpolar molecules, on the other hand, do not have regions of partial positive and negative charges and are not able to form hydrogen bonds with water molecules. As a result, they are generally not soluble in water. Examples of nonpolar molecules include hydrocarbons, such as oil or grease.
Ionic compounds, polar molecules, and hydrophilic compounds are all more likely to be soluble in water than nonpolar molecules because they can interact with water molecules through ionic interactions, dipole-dipole interactions, or hydrogen bonding.
To know more about Nonpolar molecules here
https://brainly.com/question/29224615
#SPJ4
--The given question is incomplete, the complete question is
"Which of the following is least soluble in water? group of answer choices A) ionic compounds B) nonpolar molecules C) hydrophilic compounds D)polar molecules"--
Radioactive decay follows first-order kinetics. If sodium-24 has a half-life of 14.96 hours, what is its rate constant, k?a. 4.63 × 10^−2 hr−1b. 4.36 × 10^−2 hr−1c. 4.93 × 10^−2 hr−1
If sodium-24 has a half-life of 14.96 hours then rate constant K is 0.0463 hr²−1 Rounded to two significant figures, the answer is (a) 4.63 × 10²−2 hr²−1.
The first-order rate equation is given by:
ln(N_t/N_0) = -kt
where N_0 is the initial amount of the substance, N_t is the amount of substance at time t, k is the rate constant, and ln is the natural logarithm.
The half-life of sodium-24 is given as 14.96 hours, which means that after 14.96 hours, the amount of sodium-24 will be reduced to half of its initial amount. Therefore, we can write:
N_t = (1/2)N_0
Substituting this into the first-order rate equation, we get:
ln(1/2) = -k(14.96)
Solving for k, we get:
k = [ln(1/2)]/14.96
k ≈ 0.0463 hr²−1
Therefore, the rate constant for the radioactive decay of sodium-24 is approximately 0.0463 hr²−1. Rounded to two significant figures, the answer is (a) 4.63 × 10²−2 hr²−1.
Learn more about sodium here:
https://brainly.com/question/29327783
#SPJ4
a water solution contains zn2 , ag , and al3 . which of the following compounds should be added to the solution to selectively remove the ag out of the solution, but not the other ions?
Only CuS will precipitate despite the solubility products of ZnS and CuS being 3 × 10⁻²² and 8 × 10³⁶, respectively.
What is meant by Hydrogen sulfide?A chemical substance having the formula H 2S is hydrogen sulfide. It is a colorless chalcogen-hydride gas that is toxic, caustic, and combustible. Trace concentrations of it in the ambient air have the distinct odor of rotten eggs.
The Occupational Health and Safety Administration reports that H2S is one of the main factors contributing to workplace gas inhalation fatalities in the United States.
The Bureau of Labor Statistics reports that between 2001 and 2010, hydrogen sulfide gas caused 60 worker fatalities.
Hydrogen sulfide, also known as H2S, sewer gas, swamp gas, stink damp, and sour damp, is a colorless gas that, in small quantities, has a strong rotten-egg odor. It is highly poisonous and highly flammable.
So, in a solution, only CuS will precipitate.
[CuS] = [Cu⁺² [ S⁻²] = 0.01 x 9.2 x 10⁻²² = 9.2 ₓ 10-⁻²⁴ > Ksp
[ZnS] = [Zn⁺² [ S⁻²] = 0.01 x 10⁻²² x 9.2 = 9.2 ₓ 10-⁻²⁴ < Ksp
To learn more about Hydrogen sulfide, refer to:
brainly.com/question/20714000
#SPJ4
The complete question is:
A solution contains 0.01 M Zn²⁺ and 0.01 M Cu²⁺ ions. It is saturated by passing H2 S gas in the solution. The S²⁻ ion concentration is 9.2 * 10^-22 M. The solubility products of ZnS and CuS are 3 * 10⁻²² and 8 * 10^-36 respectively. Which of the following is true?
which of the following statements is true for the equilibrium vapor pressure of a liquid in a closed system?
A vapour pressure of the a fluid at a given temperature is determined by the pressure that the saturated vapour exerts on the liquid surface. The phases of liquid and vapour are in balance.
What connection exists between pressure and the equilibrium constant?The equilibrium constants do not change even when the system's pressure varies. Only a temperature change can modify an equilibrium constant. The equilibrium position may change if the pressure is changed.
What factors affect equilibrium?The equilibrium constant is temperature-dependent and unaffected by the precise ratios of reactants to products, either presence of a catalyst, or the presence of inert substances. Additionally, it is unaffected by the volumes, pressures, and concentrations of the reactants and products.
To know more about temperature visit:
https://brainly.com/question/14633960
#SPJ1
The correct question is
A)It remains constant when the temperature increases.
B) It decreases to half its original value if the volume of the gas phase is doubled...
✓ C) It is independent of the volume of the vapor phase.
Two observations that indicate an organic liquid is dry when using the drying agent:
Two observations that can indicate that an organic liquid is dry when using the drying agent are:
When it's observed that the drying agent no longer clumps.When the organic layer isn't cloudy anymore (has become clear).Organic liquid is liquid that contains volatile organic compounds (often shorten to VOCs), such as crude oils and petroleum distillates. It is used in many stuff, ranging from paints, lacquers, glues, and adhesives; even in the production of dyes, textiles, and pharmaceuticals.
Drying agents are things that absorb moisture from their vicinity. They can be used to remove trace amounts of water from an organic solution. Some examples of drying agents are sodium metal or calcium hydride.
Learn more about drying agents at https://brainly.com/question/24174657
#SPJ4
CAN SOMEONE HELP WITH THIS QUESTION?✨
The quantity of the product obtained from the reaction is generally expressed in terms of the yield of the reaction. The amount obtained actually is called the actual yield.
What is theoretical yield?The amount of the product which is predicted by the stoichiometry is called the theoretical yield. A reaction yield is reported as the percentage of the theoretical amount.
The percentage yield is the ratio of actual yield to the theoretical yield.
% yield = Actual yield / Theoretical yield × 100
a. Molar mass of PbCO₃ = 267.21 g/mol
Molar mass of PbCl₂ = 278.1 g/mol
2.871 g of PbCO₃ gives:
2.871 × 278.1 / 267.21 = 2.988 g PbCl₂
b. % yield = 2.385 / 2.988 × 100 = 79.82 %
Thus the theoretical yield is 2.988 g and the % yield is 79.82 %.
To know more about % yield , visit;
https://brainly.com/question/29714892
#SPJ1
Which of the following compounds will hydrogen bond with water (H2O)? Select all that apply.
Only ethanol is among the possibilities given that can dissolve in water. This is because ethanol has an alcoholic functional group that will create a hydrogen bond with the proton in water.
Where can one locate hydrogen?Underground is where one can find the sole free hydrogen on earth. Stars and gas giant planets are where you'll find the majority of hydrogen. Hydrogen atoms are changed into helium atoms in the core of stars due to the intense pressure there.
Could hydrogen explode?Incorrect handling of the highly flammable gas utilized in fuel cells, hydrogen, can result in flames and explosions. A worker should always assume that a flame is present if they suspect a hydrogen leak because hydrogen fires are undetectable.
To know more about Hydrogen visit:
https://brainly.com/question/29765115
#SPJ1
cannabinol is only lsligthly soluble in methanol even though cannainbol ;and methanol are both alcohols g
Although cannabinol and methyl alcohol are both alcohols, cannabinol is only slightly soluble in methyl alcohol at room temperature due to the reason that methyl alcohol has a very short chain of carbon while cannabinol is a pure hydrocarbon due to the reason that it has a hydroxyl functional group.
Generally, solubility is defined as the maximum amount of a substance that will dissolve in a given amount of solvent at a specified temperature. Solubility is a characteristic property of a specific solute–solvent combination, and different substances have greatly differing solubilities.
Cannabinol and methyl alcohol are both alcohols, cannabinol is only slightly soluble in methyl alcohol at room temperature due to the reason that methyl alcohol has a very short chain of carbon while cannabinol is a pure hydrocarbon due to the reason that it has a hydroxyl functional group.
Learn more about solubility from the link given below.
https://brainly.com/question/28170449
#SPJ4
The relative humidity on a summer day is 80 percent. The temperature is 35 °C. Will the dew point be reached if the temperature drops to 25 C later in the evening? Use the table below to find the amount of water vapor needed for saturation at each temperature. Show your work.
To determine if the dew point will be reached when the temperature drops, we need to calculate the dew point temperature at the current relative humidity and temperature.
Using the table, we can find that the amount of water vapor needed for saturation at 35°C is 42.1 g/m3. To calculate the dew point temperature, we can use the following formula:
dew point temperature = (243.12 × ln(RH/100) + 17.62 × T / (243.12 + T)) / (17.62 - ln(RH/100) - 243.12 × T / (243.12 + T))
where RH is the relative humidity (80 percent) and T is the temperature in degrees Celsius (35°C).
Plugging in the values, we get:
dew point temperature = (243.12 × ln(80/100) + 17.62 × 35 / (243.12 + 35)) / (17.62 - ln(80/100) - 243.12 × 35 / (243.12 + 35))
dew point temperature = 29.9°C
This means that the air would have to cool to 29.9°C in order for the dew point to be reached and condensation to occur. Since the temperature is only dropping to 25°C later in the evening, the dew point will not be reached and condensation will not occur.
Calculate the following to four significant figures: (a) the percent composition of ammonia, NH3 (b) the percent composition of photographic fixer solution (“hypo”), Na2S2O3 (c) the percent of calcium ion in Ca3(PO4)2
The percent composition of ammonia, sodium thiosulfate,calcium are 82.35%,29.09%,38.68% respectively.
What is the percent composition?The Percent composition is defined as a convenient way to record concentration of solution.It is a expression which relates element to compound as,mass of element/mass of compound ×100.It is useful in elemental analysis of a compound.
percent composition of ammonia- 14/17×100=82.35%
percent composition of sodium thiosulfate -46/158.11×100=29.09%
percent composition of calcium in calcium phosphate- 120/310.18×100=38.68%.
Learn more about percent composition,here:
https://brainly.com/question/17505281
#SPJ1
following is an equation for the reaction of diethyl ether and oxygen to form a hydroperoxide. reaction draw curved fishhook arrows to show the movement of electrons in this step of the reaction mechanism. assume that initiation is by a radical, .
The reaction of diethyl ether and oxygen to form a hydroperoxide can be represented as follows:
O2 + C2H5–O–C2H5 → C2H5–O–O–C2H5 + H2O
The curved fishhook arrows show the movement of electrons in this step of the reaction mechanism. The initiation of the reaction is by a radical, specifically a radical of the ether molecule. This radical abstracts an electron from the oxygen molecule, forming a new radical which reacts with the ether molecule, resulting in the formation of the hydroperoxide molecule and the release of water. The arrows indicate the movement of electrons from the oxygen molecule to the ether molecule.
O2 → •O2
•O2 + C2H5–O–C2H5 → C2H5–O–O–C2H5 + H2O
learn more about hydroperoxide Refer:brainly.com/question/16234960
#SPJ4
While out camping one spring night, you think the moon looks orange. What is one possible explanation?
A
The moon is in its orange phase.
B
The sun is orange, and the moon is reflecting its reddish light.
C
The moon itself is giving off an orange light.
D
The dust in the atmosphere makes the moon appear orange.
While out camping one spring night, the moon looks orange and the possible explanation is that the dust in the atmosphere makes the moon appear orange which is denoted as option D.
What is Moon?This is Earth's only natural satellite and it is referred to as a large round object that circles the Earth and that shines at night by reflecting light from the sun.
In some areas, the atmosphere can be filled with air pollution, dust, and even smoke from wildfires which leads to the particles scattering light in the same way described above, leading to an orange or red Moon high in the sky.
Read more about Moon here https://brainly.com/question/1286359
#SPJ1
study the part ii spectra for base/phenolphthalein. are your answers in part i consistent with the form of the absorption spectrum obtained in part ii of this experiment? give your reasoning.
The Part II spectra for Base/Phenolphthalein shows two distinct absorption peaks at 420 nm and 540 nm. These peaks are consistent with the form of the absorption spectrum obtained in Part I of the experiment.
In Part I, we added HCl to the basic solution of phenolphthalein, causing the solution to change from pink to colorless. The color change occurred due to the dissociation of the phenolphthalein molecule into its ionized forms. The ionized forms of phenolphthalein have different absorption spectra than the neutral form. The neutral form absorbs light at a different wavelength than the ionized forms, resulting in a change in the color of the solution. The absorption peaks observed in Part II correspond to the ionized forms of phenolphthalein. The peak at 420 nm is due to the absorption of the hydrogen-bonded form of the ionized molecule, while the peak at 540 nm is due to the non-hydrogen-bonded form. These peaks are consistent with the color changes observed in Part I, as the ionized forms of phenolphthalein have different colors than the neutral form.
Learn more about phenolphthalein :
https://brainly.com/question/14804470
#SPJ4
which image shows stomata?
Answer:
The first imageExplanation:
Stomata are composed of a pair of specialized epidermal cells referred to as guard cells. its found in tree leaves and needles that help promote plant growth and exchange carbon dioxide and water with the surrounding environment.Two different substances contain molecules of similar molar mass. However, one substance exhibits hydrogen bonding, while the other does not. Which of the following statements is true?
A. Both substances will have the same viscosity.
B. The substance that contains molecules that exhibit hydrogen bonding is non-polar.
C. The substance with molecules that do not exhibit hydrogen bonding will have a lower vapor pressure than the substance with molecules that do not exhibit hydrogen bonding.
D. The substance with molecules that exhibit hydrogen bonding will have a higher boiling point than the substance with molecules that do not exhibit hydrogen bonding.
It is true that the substance with hydrogen-bonded molecules will have a greater boiling point than the substance with non-hydrogen-bonded molecules.
Which substance will have molecules bound together by hydrogen?Hydrogen bonds can form in any molecule where an oxygen or nitrogen atom is directly connected to a hydrogen atom. Despite the absence of the HF group in other compounds, hydrogen bonds can still form when hydrogen is linked to fluorine.
What circumstances would hydrogen bonding exist in?An electronegative atom from another molecule, such as nitrogen, oxygen, or fluorine, interacts with a hydrogen atom to form a hydrogen bond. To establish the link, the hydrogen has to build a covalent bond with an additional electronegative atom.
To know more about hydrogen-bonded visit:-
https://brainly.com/question/17659933
#SPJ1
isotopes are different forms of an element that have different blank . multiple select question. atomic weights atomic numbers numbers of neutrons numbers of protons
Same number of protons but different numbers of neutrons is the correct answer.
What are isotopes ?
Isotopes are variants of a chemical element that have the same number of protons in their atomic nucleus but differ in the number of neutrons. Isotopes of the same element have the same atomic number, but different atomic masses. For example, carbon-12, carbon-13, and carbon-14 are three isotopes of the element carbon.Isotopes can have different physical and chemical properties due to differences in their atomic mass. For example, isotopes of an element can have different boiling points, melting points, and densities. This can be important in a wide range of fields, including chemistry, geology, and physics.Some isotopes are unstable and undergo radioactive decay, which can result in the emission of alpha particles, beta particles, or gamma rays. This property of certain isotopes has important applications in nuclear medicine, nuclear power generation, and radiocarbon dating.
To learn more about the Isotopes, click the given link ;
https://brainly.com/question/14220416
#SPJ4
Write the equation that models the alpha decay for plutonium-240.
Answer:
Explanation:
240 4 236
Pu ----> He + U
94 2 92