Rewrite the function by completing the square.

From the graph which represents Landon's distance from ground, we can say that the distance from the ground to "first-step" is about 5 inches.

The graph which is representing the "Landon's-distance" from ground as he climb the ladder, is straight line graph,

We observe that, the number of steps is denoted on "x-axis", and

the distance from the ground (in inches) is denoted on the "y-axis";

we have to find the distance from the ground to "first-step"; On observing the graph, we see that when  the number-of-steps is "1", the distance is 5 inches.

Therefore, the required distance is 5 inches.

Learn more about Distance here

https://brainly.com/question/18573454

#SPJ1

The given question is incomplete, the complete question is

The graph represents Landon's distance from the ground as he climbs a ladder. what is the distance from the ground to the first step?

The density of the marginal distribution of X is 3ž (x + 4).

To find P(X > 4, Y > 4), we need to integrate the joint density function f(x, y) over the region where both X and Y are greater than 4. This region is a triangle with vertices at (4,4), (8,0), and (0,8). The integral is:

P(X > 4, Y > 4) = ∫∫ f(x,y) dx dy, where the limits of integration are:

4 ≤ x ≤ 8 - y
4 ≤ y ≤ 8 - x

Plugging in the joint density function, we get:

P(X > 4, Y > 4) = ∫4^8 ∫4^(8-x) 3ž dy dx = 3ž ∫4^8 (8-x-4) dx = 3ž ∫0^4 (x) dx = 3ž (8/2) = 12ž

Therefore, the probability that both X and Y are greater than 4 is 12ž.

To find P(X = 1, Y = 1), we need to evaluate the joint density function at the point (1,1). However, this point is not included in any of the regions defined by the joint density function. Therefore, P(X = 1, Y = 1) = 0.

To find the density of the marginal distribution of X, we need to integrate the joint density function over all possible values of Y. This gives us the density function of X alone. The limits of integration are:

0 ≤ x ≤ 8

Therefore, the density of the marginal distribution of X is:

f_X(x) = ∫0^8 f(x,y) dy = ∫0^x 3ž dy + ∫0^(8-x) 3ž dy = 3ž (x + 4)

Thus, the density of the marginal distribution of X is 3ž (x + 4).

Learn more about marginal distribution

brainly.com/question/14310262

#SPJ11

When an object is moved on a surface, friction acts on it. Friction is a force that resists movement or motion. The amount of work done by friction as the block crosses the rough spot is given below.

What is Friction?

Friction is the force that opposes the motion of an object. It is caused by the interaction between the two surfaces in contact with one another. Friction exists in both stationary and moving objects. The direction of friction is always opposite to the direction of motion of the object.

Friction is classified into two types: static friction and kinetic friction.

Static Friction: Static friction is the force that opposes motion between two surfaces in contact when there is no movement between them. The magnitude of static friction is proportional to the force applied to the surface.

Kinetic Friction: Kinetic friction is the force that opposes motion between two surfaces in contact when there is movement between them. The magnitude of kinetic friction is proportional to the force applied to the surface.

The amount of work done by friction as the block crosses the rough spot is a negative value because the direction of friction is always opposite to the direction of motion of the object. Therefore, the amount of work done by friction is negative.

To know more about  Friction, visit

https://brainly.com/question/28356847

#SPJ11

The value of the line integral ∫C F ⋅ dr is -14.

To evaluate the line integral ∫C F ⋅ dr, where F = (x z)i + zj + yk and C is the line from (2,4,4) to (1,5,2), we need to parameterize the line segment C and then calculate the dot product of F with the differential vector dr.

Parameterizing the line segment C:

Let's use t as the parameter and find the equations for x, y, and z in terms of t.

x = 2 + (1 - 2)t = 2 - t

y = 4 + (5 - 4)t = 4 + t

z = 4 + (2 - 4)t = 4 - 2t

Now, we can find the differential vector dr:

dr = dx i + dy j + dz k

= (-dt)i + dt j + (-2dt)k

= (-dt)i + dt j - 2dt k

Next, we calculate F ⋅ dr:

F ⋅ dr = (x z)(-dt) + z(dt) + y(-2dt)

= ((2 - t)(4 - 2t))(-dt) + (4 - 2t)(dt) + (4 + t)(-2dt)

= (8 - 8t + 2t^2)(-dt) + (4 - 2t)(dt) + (-8 - 2t)(dt)

= -8dt + 8t dt - 2t^2 dt + 4dt - 2t dt - 8dt - 2t dt

= -14dt

Finally, we integrate -14dt over the parameter interval from t = 0 to t = 1 to find the value of the line integral:

∫C F ⋅ dr = ∫0^1 -14dt

= -14[t]0^1

= -14(1 - 0)

= -14

Therefore, the value of the line integral ∫C F ⋅ dr is -14.

Learn more about integral at :

brainly.com/question/22008756

#SPJ11

The smallest positive integer value of x for which[tex]f(x) = 2^x + 2[/tex] exceeds [tex]g(x) = 12x + 8[/tex]  is x = 4.

To find the smallest positive integer value of x for which the value of[tex]f(x) = 2^x + 2[/tex] exceeds the value of g(x) = 12x + 8, we need to compare the two functions and determine when the inequality is satisfied.

Setting up the inequality, we have:

[tex]2^x + 2 > 12x + 8[/tex]

First, let's simplify the inequality by subtracting 8 from both sides:

[tex]2^x - 6 > 12x[/tex]

Now, we can try to solve this inequality by considering different values of x.

However, it is challenging to find an exact solution by hand due to the exponential nature of [tex]2^x.[/tex]

Therefore, let's graph the two functions,[tex]f(x) = 2^x + 2[/tex] and g(x) = 12x + 8, to visually determine the point of intersection.

Upon graphing the functions, we observe that the graphs intersect at some point.

We can see that the value of f(x) starts to exceed g(x) as x increases.

To find the smallest positive integer value of x for which f(x) exceeds g(x), we need to analyze the graph and determine the first integer value after the intersection point where f(x) is greater than g(x).

Examining the graph, we find that the smallest positive integer value of x for which f(x) exceeds g(x) is x = 4.

Therefore, the answer is x = 4.

For similar question on positive integer value.

https://brainly.com/question/30522847

#SPJ11

The transitions for reading b in state q' allow the PDA to read any number of b's as long as there are at least as many b's as a's.    

We can construct a pushdown automaton (PDA) that accepts the language L = {[tex]a^n b^{(2n)[/tex] : n ≥ 0} as follows:

The PDA has a single state q which is the initial and final state.

The PDA uses a single stack symbol Z as the bottom-of-stack marker.

In state q the PDA reads the input symbol and pushes the symbol A onto the stack.

Then for each additional it reads it pushes another A onto the stack.

The PDA reads the input symbol b it transitions to a new state q' reads the next symbol from the input without consuming any stack symbols.

This ensures that we have exactly 2n b's for the n a's we pushed onto the stack.

In state q' the PDA pops one A from the stack for each b it reads from the input until the stack is empty.

Then it transitions to the final state q.

If the PDA reaches the final state q with an empty stack it accepts the input.

Otherwise it rejects the input.

The formal description of the PDA is as follows:

Q = {q, q'}

Σ = {a, b}

Γ = {A, Z}

δ(q, a, Z) = {(q, AZ)}

δ(q, a, A) = {(q, AA)}

δ(q, b, A) = {(q', ε)}

δ(q', b, A) = {(q', ε)}

δ(q', ε, Z) = {(q, ε)}

The transitions for reading b in state q' allow the PDA to read any number of b's as long as there are at least as many b's as a's.

If there are more b's than twice the number of a's the PDA will reach a configuration where it cannot make any further transitions and will reject the input.

For similar questions on PDA

https://brainly.com/question/31959569

#SPJ11

The equation of the line shown is y = -0.25x + 2.

In Mathematics and Geometry, the point-slope form of a straight line can be calculated by using the following mathematical equation (formula):

y - y₁ = m(x - x₁)

Where:

First of all, we would determine the slope of this line;

Slope (m) = (y₂ - y₁)/(x₂ - x₁)

Slope (m) = (1 - 2)/(4 - 0)

Slope (m) = -1/4

Slope (m) = -0.25

At data point (0, 2) and a slope of -0.25, a linear equation for this line can be calculated by using the point-slope form as follows:

y - y₁ = m(x - x₁)

y - 2 = -0.25(x - 0)  

y = -0.25x + 2  

Read more on point-slope here: brainly.com/question/24907633

#SPJ1

A statement that correctly describes the graph of g(x) if g(x) = f(x - 11) include the following: A. It is the graph of f(x) translated 11 units to the right.

In Mathematics and Geometry, the translation of a graph to the right simply means adding a digit to the numerical value on the x-coordinate of the pre-image:

g(x) = f(x - N)

Conversely, the translation of a graph upward simply means adding a digit to the numerical value on the y-coordinate (y-axis) of the pre-image.

g(x) = f(x) + N

In conclusion, we can logically deduce that the parent function f(x) = x was translated 11 units to the right in order to produce the graph of g(x).

Read more on function and translation here: brainly.com/question/31559256

#SPJ1

The values of x and y are 6 and 4, respectively. So, x = 6 and y = 4.

Given equations:

2x + 3y = 24, and

5x - 2y = 22

To find the values of x and y,

we have to solve the equations by using the elimination method.

Here's how:

Step 1:

Multiply equation (1) by 2 and equation (2) by 3.

4x + 6y = 48  (Equation 1 multiplied by 2)

15x - 6y = 66 (Equation 2 multiplied by 3)

Step 2: Add both equations to eliminate y,

4x + 6y = 48

15x - 6y = 66 ___________________________

19x = 114

Step 3: Divide both sides by 19.

x = 6

Step 4: Substitute the value of x in any of the given equations.

2x + 3y = 24

Putting the value of x, we get:

2 (6) + 3y = 24

Simplifying, we get:

12 + 3y = 24

Step 5: Solve for y,

3y = 24 - 12

y = 4

Thus, the values of x and y are 6 and 4, respectively. So, x = 6 and y = 4.

To know more about elimination method visit:

https://brainly.com/question/13877817

#SPJ11

According to the information, Charles de Vendeville earned 148.4 points to place first.

In the underwater swimming event, the score was calculated based on the time underwater and the distance traveled. Each second underwater earned one point, and each meter traveled earned two points.

Charles de Vendeville stayed underwater for 68.4 seconds and traveled 60.2 meters. To calculate his score, we need to multiply the time underwater by one and the distance traveled by two, and then sum the two values:

So, Charles de Vendeville earned 188.8 points.

Learn more about points in: https://brainly.com/question/30891638

#SPJ1

The rate of filling the silos is 106 ft³/ min.

a) Let's assume that both silos A and B have the same volume, represented as V cubic feet.

So, Volume of cylinder A

= πr²h

= 29587.69 ft³

and, Volume of cone A

= 1/3 π (12)² x 6

= 904.7786 ft³

Now, Volume of cylinder B

= πr²h

= 31667.25 ft³

and, Volume of cone B

= 1/3 π (12)² x 6

= 1206.371 ft³

Thus, the rate of filling

= (6363.610079)/ 10 x 60

= 106.0601 ft³ / min

Learn more about Volume here:

https://brainly.com/question/28058531

#SPJ1

The designer will sell the maximum number of shirts when the price is $9.

To find the price at which the designer will sell the maximum number of shirts, we need to determine the value of x that corresponds to the maximum value of the given formula S = -4x^2 + 72x - 68.

To find the maximum value, we can use the concept of the vertex of a parabola. The x-coordinate of the vertex can be found using the formula x = -b / (2a), where a, b, and c are the coefficients of the quadratic equation in the form ax^2 + bx + c.

In this case, a = -4 and b = 72. Plugging these values into the formula, we have:

x = -72 / (2*(-4))

x = -72 / (-8)

x = 9

Therefore, the designer will sell the maximum number of shirts when the price is $9.

Read more on quadratic equation here:https://brainly.com/question/1214333

#SPJ1

The deadweight loss (DWL) resulting from ACME not being regulated cannot be determined solely based on the options provided (a. 2000, b. 500, c. 1250, d. zero). To calculate the DWL, additional information such as market demand, supply, and any potential distortions would be necessary.

To answer this question, it is important to understand what dwl means. DWL stands for deadweight loss, which is the loss of economic efficiency that occurs when the equilibrium for a good or service is not at the efficient allocation. In other words, dwl occurs when a market is not operating optimally.
If Acme is not regulated, there is a high likelihood that the market will not be operating efficiently. This is because companies like Acme may engage in activities that are not beneficial to consumers, such as monopolizing the market or creating barriers to entry. These actions can lead to an increase in prices, decrease in quality, or both.
The size of the dwl will depend on the degree of market inefficiency. Without additional information, it is difficult to determine the exact size of the dwl. However, it is safe to assume that the dwl will be larger than zero. Therefore, the correct answer to the question would be either a, b, or c, as it is impossible to determine the exact size of the dwl without additional information.
In conclusion, the size of the dwl if Acme is not regulated cannot be determined without additional information. However, it is safe to assume that it will be larger than zero and could potentially be one of the options provided in the question (a, b, or c).

To know more about equilibrium visit:

https://brainly.com/question/30807709

#SPJ11

The shortest distance from the chord and the center of the circle is given by the relation D = 4.6 cm

Given data ,

A circle of diameter 15 cm contains a chord of length 11.8 cm.

The shortest distance between the chord and the center of the circle is given by the formula:

Distance = √(r² - (d/2)²)

where r is the radius of the circle and d is the length of the chord.

On simplifying , we get

D = √(7.5² - (11.8/2)²)

Distance = √(56.25 - 34.81)

Distance = √21.44

Distance ≈ 4.6 cm

Hence , the distance is 4.6 cm

To learn more about circle click :

https://brainly.com/question/28391204

#SPJ1

The monthly finance charge rate is 0.021, or 2.1%.

To find the monthly finance charge rate, we divide the finance charge by the previous balance and express it as a decimal.

Given that Mr. Dan Dapper received a statement with a finance charge of $2.10 on a previous balance of $100, we can calculate the monthly finance charge rate as follows:

Step 1: Divide the finance charge by the previous balance:

Finance Charge / Previous Balance = $2.10 / $100

Step 2: Perform the division:

$2.10 / $100 = 0.021

Step 3: Convert the result to a decimal:

0.021

Therefore, the monthly finance charge rate is 0.021, which is equivalent to 2.1% when expressed as a percentage.

Therefore, the monthly finance charge rate for Mr. Dan Dapper's clothing store is 2.1%. This rate indicates the percentage of the previous balance that will be charged as a finance fee on a monthly basis.

To know more about finance, visit:

https://brainly.com/question/30368428

#SPJ11

Answer:  x=12.8

Step-by-step explanation:

Solution by Cross Multiplication

The equation:

5

8  =  

8

x

The cross product is:

5 * x  =  8 * 8

Solving for x:

x =

8 * 8

5

x = 12.8

Answer:

To solve the proportion 5/8 = 8/x, we can use cross-multiplication, which involves multiplying the numerator of one fraction by the denominator of the other fraction, and vice versa.

So, we have:

5/8 = 8/x

Cross-multiplying, we get:

5x = 8 * 8

Simplifying the right-hand side, we get:

5x = 64

Dividing both sides by 5, we get:

x = 64/5

So the solution to the proportion is:

x = 12.8

Therefore, 8 is proportional to 12.8 in the same way that 5 is proportional to 8.

Learn more about Proportions here:

https://brainly.com/question/30657439

Series Converges using root test.

To determine the convergence or divergence of the series [tex]\sum[\infty n]=1(lnn/9n-10)^n[/tex] using the Root Test, we need to compute the limit of the nth root of the absolute value of the terms.

Let's proceed with the Root Test:

To evaluate this limit, we can use L'Hôpital's Rule. Differentiating the numerator and denominator with respect to n gives:

lim(n->∞) [ln(n)/(9n - 10)] = lim(n->∞) [1/(9n - 10)] / (1/n).

Simplifying further:

lim(n->∞) [1/(9n - 10)] / (1/n) = lim(n->∞) [n/(9n - 10)].

Dividing both the numerator and denominator by n yields:

lim(n->∞) [n/(9n - 10)] = lim(n->∞) [1/(9 - 10/n)] = 1/9.

Since the limit is a finite non-zero value (1/9), the Root Test tells us that if the limit is less than 1, the series converges. If the limit is greater than 1 or infinity, the series diverges.

In this case, the limit is 1/9, which is less than 1. Therefore, the series ∑[infinity]n=[tex]1(lnn/9n-10)^n[/tex] converges.

Therefore, the correct option is:

B) Converges

So, Series converges

Learn more about convergence or divergence of the series

brainly.com/question/31778047

#SPJ11

A group must consist of 73 people to guarantee that at least 7 were born in the same month of the year.

To guarantee that at least 7 people were born in the same month of the year, we can use the Pigeonhole Principle. The Pigeonhole Principle states that if n items are placed into m containers, with n > m, then at least one container must contain more than one item.

In this case, the "items" are people, and the "containers" are the months of the year. Since there are 12 months in a year, there are 12 containers. To guarantee that at least 7 people were born in the same month, we need to find the smallest number of people (n) that satisfies the Pigeonhole Principle.

First, let's consider placing 6 people in each of the 12 months. This would result in 72 people (6 x 12).

However, this scenario still doesn't guarantee that any of the months would have 7 people.

To ensure that at least one month has 7 people, we need to add 1 more person to the group, making the total 73 people (72 + 1).

Now, even in the worst-case distribution scenario, at least one month would have 7 people, satisfying the Pigeonhole Principle. Therefore, a group must consist of 73 people to guarantee that at least 7 were born in the same month of the year.

Know more about Pigeonhole Principle here:

https://brainly.com/question/13982786

#SPJ11

In all cases, pumping the string w results in a string that is not in L, which contradicts the pumping lemma. And we can conclude that L is not a context-free language.

To prove that a language is not context-free, we can use the pumping lemma for context-free languages.

Assume that the language L = {w : w is a palindrome containing the same number of 0's and 1's} is context-free. Then, by the pumping lemma for context-free languages, there exists a constant p such that any string w in L with length |w| ≥ p can be written as w = uvxyz, where:

Let's choose the string w = [tex]0^p1^p0^p[/tex]. This string is in L because it is a palindrome and contains the same number of 0's and 1's. By the pumping lemma, we can write w = uvxyz, where |vxy| ≤ p and |vy| > 0.

There are three cases:

Therefore, in all cases, pumping the string w results in a string that is not in L, which contradicts the pumping lemma. Hence, we can conclude that L is not a context-free language.

To know more about palindrome, refer to the link below:

https://brainly.com/question/14076732#

#SPJ11

We can be 99% confident that the population mean falls between 55.27 and 108.73.

To find the appropriate 99% confidence interval for the population mean, we can use the formula:

Confidence Interval = Sample Mean ± (t-value x Standard Error)

where the t-value is based on the degrees of freedom (df = n-1) and the desired level of confidence, and the standard error is calculated as:

Standard Error = Standard Deviation / sqrt(n)

Given that we have a sample size of 10, the degrees of freedom is 10 - 1 = 9. From a t-distribution table with 9 degrees of freedom and a 99% confidence level, the t-value is 3.250.

To calculate the standard error, we use the formula:

Standard Error = 26 / sqrt(10) ≈ 8.23

Therefore, the 99% confidence interval is:

82 ± (3.250 x 8.23)

which simplifies to:

82 ± 26.73

So the lower bound is 82 - 26.73 = 55.27, and the upper bound is 82 + 26.73 = 108.73.

Learn more about Confidence Interval at: brainly.com/question/13067956

#SPJ11

the final answer is: 1/3. We can use the hypergeometric distribution to solve this problem.

Let X be the number of funds that grew by at least 10% out of Sam's three selected funds. Then X follows a hypergeometric distribution with parameters N = 10 (total number of funds), K = 5 (number of funds that grew by at least 10%), and n = 3 (number of funds Sam selected).

The probability of two of Sam's three funds growing by at least 10% is:

P(X = 2) = (5 choose 2) * (5 choose 1) / (10 choose 3)
         = 10 * 5 / 120
         = 1/3

Therefore, the probability of experiencing  neither of the side effects is:

P(neither side effect) = 1 - P(at least one side effect)
                      = 1 - (0.23 + 0.52 - 0.12)
                      = 0.37

So the final answer is: 1/3.

To  learn  more about probability click here:brainly.com/question/32117953

#SPJ11

True, Wn is bipartite for n ≥ 3 because we need to partition its vertices into two disjoint sets, such that no two vertices in the same set are adjacent.

To show that Wn is bipartite, we need to partition its vertices into two disjoint sets, such that no two vertices in the same set are adjacent.

Step 1: Consider a wheel Wn, where n is the number of vertices, and n ≥ 3.

Step 2: The wheel Wn is formed by adding an additional vertex, called the hub, to a cycle Cn.

Step 3: Divide the vertices into two sets:
- Set A: The hub vertex and every other vertex of the cycle Cn.
- Set B: The remaining vertices of the cycle Cn.

Step 4: Observe that no two vertices in Set A are adjacent, as the hub is only connected to the vertices in the cycle, and the vertices from the cycle in Set A are separated by vertices from Set B. Similarly, no two vertices in Set B are adjacent since they are separated by vertices from Set A in the cycle.

Step 5: Since the vertices can be divided into two sets with no adjacent vertices within each set, we can conclude that Wn is bipartite for n ≥ 3.

Learn more about bipartite here:

https://brainly.com/question/30889414

#SPJ11

The correlation between two scores X and Y equals 0.75. If both scores were converted to z-scores, then the correlation between the z-scores for X and z-scores for Y would be the same as the original correlation between X and Y, which is 0.75.

To determine the correlation between z-scores of X and Y, the formula for correlation coefficient (r) is used, which is as follows:

r = covariance of (X, Y) / (SD of X) (SD of Y). We have a given correlation coefficient of two scores, X and Y, which is 0.75. To find out the correlation coefficient between the z-scores of X and Y, we can use the formula:

r(zx,zy) = covariance of (X, Y) / (SD of X) (SD of Y)

r(zx, zy) = r(X,Y).

We know that correlation is invariant under linear transformations of the original variables.

Hence, the correlation between the original variables X and Y equals the correlation between their standardized scores zX and zY. Therefore, the correlation between the z-scores for X and z-scores for Y would be the same as the original correlation between X and Y.

Therefore, the correlation between two scores, X and Y, equals 0.75. If both scores were converted to z-scores, then the correlation between the z-scores for X and z-scores for Y would be the same as the original correlation between X and Y, which is 0.75. Therefore, the answer to the given question is 5) 0.75.

To know more about linear transformations, visit:

brainly.com/question/13595405

#SPJ11

a) The exponential growth function that represents this growth is:

P(t) = 320[tex]e^{(0.0304t)[/tex]

b) We can estimate that the population in 2020 was approximately 397.3 million.

c) It will take approximately 22.8 years for the population to double.

a) The exponential growth function that represents this growth is:

P(t) = P₀[tex]e^{(rt)[/tex]

where P₀ is the initial population, r is the continuous growth rate, and t is the time elapsed.

We know that the population in 2002 was 320 million, so P₀ = 320. We also know that the population in 2012 was 330 million, so:

330 = 320[tex]e^{(10r)[/tex]

Solving for r:

[tex]e^{(10r)[/tex] = 1.03125

10r = ln(1.03125)

r ≈ 0.0304

Therefore, the exponential growth function that represents this growth is:

P(t) = 320[tex]e^{(0.0304t)[/tex]

b) To estimate the population in 2020, we need to find the value of P(18), since 2020 - 2002 = 18. So:

P(18) = 320[tex]e^{(0.0304*18)[/tex] ≈ 397.3 million

c) To find how long it will take to double the original population, we need to solve for t in the equation:

2P₀ = P₀[tex]e^{(rt)[/tex]

Dividing both sides by P₀:

2 = [tex]e^{(rt)[/tex]

Taking the natural logarithm of both sides:

ln(2) = rt

Solving for t:

t = ln(2)/r

Substituting the value of r that we found earlier:

t ≈ 22.8 years

To learn more about population click on,

https://brainly.com/question/14109739

#SPJ1

Part A : The pair of linear equations that shows the relationship between the number of minutes Pam practices math (x) and that of dance (y) is :

x + y = 80 and y = x + 20.

Part B : The time that Pam practices everyday is 50 minutes.

Part C : It is not possible to dance for 60 minutes since the total time then becomes 100.

Part A :

Give that,

Total time taken for dance and math = 80 minutes

x + y = 80

To help her concentrate better, she dances for 20 minutes longer than she works on math.

y = x + 20

Linear equations are x + y = 80 and y = x + 20.

Part B :

So we have,

x + y = 80 and y = x + 20

Substituting y = x + 20 in the first equation,

x + (x + 20) = 80

2x = 60

x = 30

So, y = 30 + 20 = 50 minutes

Part C :

If Pam practices for 60 minutes for dance.

y = x + 20 = 60

x = 60 - 20 = 40

x + y = 60 + 40 = 100

Not possible for exactly 80 minutes.

Learn more about Linear Equations here :

https://brainly.com/question/29111179

#SPJ1

3x-0.03=0.75 where x is the price from 20 years ago.

a. It is also sometimes referred to as the response variable, outcome variable, or predicted variable. b.  linear regression analysis with only one independent variable, that variable is called the "regressor" or "regressor variable".

a. The dependent variable in a regression analysis is the variable that is being predicted or explained by the independent variable(s). It is also sometimes referred to as the response variable, outcome variable, or predicted variable.

b. The independent variable in a regression analysis is the variable that is being used to explain or predict the values of the dependent variable. It is also sometimes referred to as the predictor variable, explanatory variable, or input variable. In a simple linear regression analysis with only one independent variable, that variable is called the "regressor" or "regressor variable".

Learn more about outcome variable here

https://brainly.com/question/2677749

#SPJ11

The given indefinite integrals can be evaluated as

a) ∫6etdt = 6et + c

b) ∫2rdr = r^2 + c

c) ∫10x^2 0dx = (10/3)x^3 + c

In calculus, an indefinite integral represents a family of functions that differ from each other only by a constant. It is also known as an antiderivative because it is the opposite operation of differentiation.

The indefinite integral of a function f(x) is denoted as ∫f(x)dx, where dx represents the variable of integration. The result of integrating a function is called an antiderivative or a primitive of the function.

For part a), the indefinite integral of 6e^t is simply 6e^t + C, where C is the constant of integration.

For part b), the indefinite integral of 2r is r^2 + C, where C is the constant of integration.

For part c), the indefinite integral of 10x^2 is (10/3)x^3 + C, where C is the constant of integration.

For more such questions on indefinite integrals.

brainly.com/question/29133144

#SPJ11

Since the limit is less than 1, by the ratio test, the series converges absolutely.

To determine the convergence or divergence of the series, the ratio test is applied. The ratio test involves taking the limit of the absolute value of the ratio of the (k+1)-th term and the k-th term as k approaches infinity. If this limit is less than 1, then the series converges. If the limit is greater than 1 or does not exist, then the series diverges.

In this case, the ratio test is applied to the series ∑(k=1 to infinity) ke^(-5k). After applying the ratio test and simplifying, the limit is found to be 0, which is less than 1. Therefore, the series converges. This means that the sum of the series exists and is a finite value.

Applying the ratio test:

lim k→∞ (k+1)e−5(k+1) / ke−5k

= lim k→∞ (k+1) / e5 * k

As k approaches infinity, the denominator (e5k) grows much faster than the numerator (k+1), so the limit is 0.

To know more about limit,

https://brainly.com/question/30339390

#SPJ11

Answer: Part A: Square Part B: 4.5 Part C: The reason why the shape of the cross-section is because if split a rectangle in half you get two squares.  

Step-by-step explanation: