Robinsons tapestry all measure 1.5m x 1 m. express the tapestries night to width using round numbers and ratio notation

The longest line segment is line segment A.

option A.

The length of the longest line is calculated by converting the unit measurement of both lines to the same units as shown below.

the length of line A = 8.3 feet

the length of line B = 2 m

The given conversion factor is;

3.28 ft = 1 m

The length of line B is feet is calculated as follows;

Length of line B (ft) = length in meters  x conversion factor

the length of line B = 2 m  x  3.28 ft / 1 m

the length of line B = 6.56 feet

Thus, we can conclude that the length of line A is greater than the length of line B.

Learn more about lengths of lines here: https://brainly.com/question/1597347

#SPJ1

The extra amount Cynthia will have to pay in finance charges (interest) due to the increase in her APR is $761.48.
In summary, Cynthia will have to pay an additional $761.48 in finance charges because of the increase in her APR.

To calculate the extra finance charges, we need to compare the finance charges under the original APR and the new APR.
Under the original APR of 17%, Cynthia's monthly interest rate would be (17%/12) = 1.42%. With a balance of $3,265 and a repayment period of 24 months, the total finance charges would be ($3,265 * 1.42% * 24) = $1,169.47.
After missing a payment, Cynthia's APR increases to 21%. The new monthly interest rate would be (21%/12) = 1.75%. Using the same balance and repayment period, the total finance charges under the new APR would be ($3,265 * 1.75% * 24) = $1,930.95.
The difference in finance charges between the two APRs is ($1,930.95 - $1,169.47) = $761.48. Therefore, Cynthia will have to pay an additional $761.48 in finance charges due to the increase in her APR.
Thus, the correct answer is d. $761.48.

Learn more about interest here
https://brainly.com/question/30955042



#SPJ11

Answer:

25 degrees

Step-by-step explanation:

these angles are equal. set them equal to each other and solve for x.

75 = 3x

x = 25

Let r be a partial order on set S, and let t be a subset of S. If a and a' are both elements of t, where a is the greatest element and a' is a maximal element, then it can be proven that a = a'.

To prove that a = a', we consider the definitions of greatest and maximal elements. The greatest element in a set is an element that is greater than or equal to all other elements in that set. A maximal element, on the other hand, is an element that is not smaller than any other element in the set, but there may exist other elements that are incomparable to it.

Given that a is the greatest element in t and a' is a maximal element in t, we can conclude that a' is not smaller than any other element in t. Since a is the greatest element, it is greater than or equal to all elements in t, including a'. Therefore, a is not smaller than a'.

Now, to prove that a' is not greater than a, suppose by contradiction that a' is greater than a. Since a' is not smaller than any other element in t, this would imply that a is smaller than a'. However, since a is the greatest element in t, it cannot be smaller than any other element, including a'. This contradicts our assumption that a' is greater than a.

Hence, we have shown that a is not smaller than a' and a' is not greater than a, which implies that a = a'. Therefore, if a is the greatest element and a' is a maximal element in t, then a = a'.

To learn more about contradiction click here, brainly.com/question/30373679

#SPJ11

Answer:

E and F

Step-by-step explanation:

(16/20 = 0.80)

14/8 = 1.75

9/10 = 0.90

8/5 =1.60

13/10 = 1.30

4/5 = 0.80

8/10 = 0.80

You have to to put the reduce the fractions and then put them in to decimal form then see if they are the same as the one you want it to be.

Julia is conducting an experiment to observe the effect of oxygen levels on the growth of yeast colonies. To do this, she grows the same yeast colonies in 20 test tubes and splits them into two groups: Group A with a normal oxygen level and Group B with double the normal oxygen level.

In an experiment, the control group is the group that is kept under normal or standard conditions, and the experimental group is the group that is exposed to the variable being tested. In this case, Group A is kept under normal conditions, and Group B is exposed to the variable (double the normal oxygen level).

Therefore, the best description of the groups would be: Group A is the control and Group B is the experimental group. This is because the control group is used as a baseline to compare the results with the experimental group.

In summary, Group A is used as a standard or control group, while Group B is used as an experimental group to test the effect of the variable (double the normal oxygen level) on the growth of yeast colonies.

Learn more about yeast here:

https://brainly.com/question/30288249

#SPJ11

Answer:

  D.  1/6

Step-by-step explanation:

You want the area enclosed by the graph of y = x(1 -x) and the x-axis.

The area is the integral of the function value over the interval in which it is non-negative.

The zeros are at x=0 and x=1, so those are the limits of integration.

  [tex]\displaystyle \int_0^1{(x-x^2)}\,dx=\left[\dfrac{x^2}{2}-\dfrac{x^3}{3}\right]_0^1=\dfrac{1}{2}-\dfrac{1}{3}=\dfrac{1}{6}[/tex]

The enclosed area is 1/6 square units.

<95141404393>

We start by rearranging the given differential equation into the standard form of a separable differential equation:

[tex]\frac{dh}{dt} = (\frac{-R}{v}) (\frac{h}{R+h})[/tex]

=> [tex](\frac{v}{R+h)} \frac{dh}{h} = \frac{-R}{v} dt[/tex]

Integrating both sides with respect to their respective variables, we get:

[tex]ln|h+R| - ln|R| = (\frac{-R}{v}) t + C[/tex]

where C is the constant of integration. Simplifying, we have:

[tex]ln|h+R| = (\frac{-R}{v})t + ln|CR|[/tex]

where CR is a positive constant obtained by combining R and the constant of integration.

Taking the exponential of both sides, we get:

[tex]|h+R| = e^{(\frac{-R}{v}) t} + ln|CR|)[/tex]

=> [tex]|h+R| = e^{(\frac{-R}{v}) t} CR[/tex]

We take cases for h+R being positive and negative:

Case 1: h+R > 0

Then we have:  [tex]|h+R| = e^{(\frac{-R}{v}) t} CR[/tex]

[tex]h = (e^{(\frac{-R}{v}) t} CR) - R[/tex]

Case 2: h+R < 0

Then we have:

[tex]|h+R| = e^{(\frac{-R}{v}) t} CR[/tex]

=>[tex]h =- ((e^{(\frac{-R}{v}) t} CR)+R[/tex]

Therefore, the general solution to the given differential equation is:

[tex]h(t)=e^{(\frac{-R}{v}) t} CR)-R[/tex] if h+R > 0,

[tex]- (e^{\frac{-R}{v} }t ) CR)+R[/tex]if h+R < 0}

where CR is a positive constant determined by the initial conditions.

To know more about "Differential equation" refer here:

https://brainly.com/question/1164377#

#SPJ11

The speed of the plane is 900 km/h, and the speed of the wind is 100 km/h.

Let's denote the speed of the plane as P and the speed of the wind as W.

When the airplane is flying with the wind, the effective speed of the plane is increased by the speed of the wind. Conversely, when the airplane is flying against the wind, the effective speed of the plane is decreased by the speed of the wind.

We can set up two equations based on the given information:

With the wind:

The speed of the plane with the wind is P + W, and the time taken to cover the 8000 km distance is 8 hours. Therefore, we have the equation:

(P + W) * 8 = 8000

Against the wind:

The speed of the plane against the wind is P - W, and the time taken to cover the same 8000 km distance is 10 hours. Therefore, we have the equation:

(P - W) * 10 = 8000

We can solve this system of equations to find the values of P (speed of the plane) and W (speed of the wind).

Let's start by simplifying the equations:

(P + W) * 8 = 8000

8P + 8W = 8000

(P - W) * 10 = 8000

10P - 10W = 8000

Now, we can solve these equations simultaneously. One way to do this is by using the method of elimination:

Multiply the first equation by 10 and the second equation by 8 to eliminate W:

80P + 80W = 80000

80P - 80W = 64000

Add these two equations together:

160P = 144000

Divide both sides by 160:

P = 900

Now, substitute the value of P back into either of the original equations (let's use the first equation):

(900 + W) * 8 = 8000

7200 + 8W = 8000

8W = 8000 - 7200

8W = 800

W = 100

Therefore, the speed of the plane is 900 km/h, and the speed of the wind is 100 km/h.

To know more about speed,distance and time, visit:

https://brainly.com/question/30609135

#SPJ11

To find the equation for the line tangent to the parametric curve at the point where t=3, we need to find the values of x and y at t=3 and the corresponding slopes.

Given the parametric equations: x=t^3−9t and y=9t^2−t^4.

At t=3, we have:

x = (3)^3 - 9(3) = 0

y = 9(3)^2 - (3)^4 = 54

To find the slope at t=3, we need to find dy/dx:

dy/dt = 18t - 4t^3

dx/dt = 3t^2 - 9

dy/dx = (dy/dt) / (dx/dt)

      = (18t - 4t^3) / (3t^2 - 9)

At t=3, we have:

dy/dx = (18(3) - 4(3)^3) / (3(3)^2 - 9)

     = -6

Therefore, the slope of the tangent line at t=3 is -6. To find the equation of the tangent line, we use the point-slope form- y - 54 = (-6)(x - 0)

Simplifying  y = -6x + 54

So the equation of the tangent line at t=3 is y = -6x + 54x

For t=-3, we can repeat the same process to find the equation of the tangent line. However, since the curve is symmetric about the y-axis, the tangent line at t=-3 will have the same equation as the tangent line at t=3, except reflected across the y-axis. Therefore, the equation of the tangent line at t=-3 is y = 6x + 54.

To know more about tangent lines refer here

https://brainly.com/question/31326507

SPJ11

The value of the integral by reversing the order of integration is (81/4)(96e^(12) - 1).

We need to evaluate the integral of 3y over the region R bounded by x=0, x=3, y=27, and y=6e^(4x) by reversing the order of integration.

To reverse the order of integration, we first draw the region of integration, which is a rectangle. Then, we integrate with respect to x first. For each value of x, the limits of integration for y are from 27 to 6e^(4x). Thus, we have:

∫(0 to 3) ∫(27 to 6e^(4x)) 3y dy dx = ∫(27 to 6e^(12)) ∫(0 to ln(y/6)/4) 3y dx dy

To find the new limits of integration for x, we solve y=6e^(4x) for x to get x=ln(y/6)/4. The limits of integration for y are still from 27 to 6e^(12).

Now, we can evaluate the integral using the reversed order of integration:

∫(27 to 6e^(12)) (∫(0 to ln(y/6)/4) 3y dx) dy = ∫(27 to 6e^(12)) (3y/4 ln(y/6)) dy

Integrating this expression gives:

(3/4)(y ln(y/6) - (9/4)y) from y=27 to y=6e^(12) = (81/4)(96e^(12) - 1)

Therefore, the value of the integral by reversing the order of integration is (81/4)(96e^(12) - 1).

Learn more about order of integration:

https://brainly.com/question/30286960

#SPJ11

The value of x is -sqrt(55)/8.

Let's use the Pythagorean theorem to find the value of x.

Since P is on the unit circle, we know that the distance from the origin to P is 1. Let's call the x-coordinate of P "x".

We can use the Pythagorean theorem to write:

x^2 + (-3/8)^2 = 1^2

Simplifying, we get:

x^2 + 9/64 = 1

Subtracting 9/64 from both sides, we get:

x^2 = 55/64

Taking the square root of both sides, we get:

x = ±sqrt(55)/8

Since P is in quadrant III, we know that x is negative. Therefore,

x = -sqrt(55)/8

So the value of x is -sqrt(55)/8.

To know more about Pythagorean theorem  refer here:

https://brainly.com/question/14930619

#SPJ11

Based on the histogram, it seems that the percentage of men with cholesterol levels above 220 is around 15%. To calculate this, we can look at the total area of the bars to the right of 220 and divide it by the total area of the entire histogram.

To be more specific, we can count the number of bars to the right of 220, which is 3. Each of these bars has a width of 5 and a height (frequency) of 4, 6, and 2 respectively. So the total area of these bars is 5 x (4 + 6 + 2) = 60.

The total area of the entire histogram is 5 x 20 = 100. Therefore, the percentage of men with cholesterol levels above 220 is (60/100) x 100 = 60%.

So the answer is not provided in the answer choices, but it would be closest to 60% based on the given histogram.
The histogram displays the distribution of serum cholesterol levels in milligrams per deciliter (mg/dL) for a sample of men. To determine the percentage of men with cholesterol levels above 220 mg/dL, you should examine the histogram and identify the relevant bars that represent cholesterol levels above 220 mg/dL. Then, calculate the number of men in these bars and divide it by the total number of men in the sample, and finally multiply the result by 100 to obtain the percentage.

To know more about Histogram visit :

https://brainly.com/question/30354484

#SPJ11

Given,Two angles of a quadrilateral measures 260 and 30.The other two angles are in a ratio of 3:4.

Let the measures of other two angles be 3x and 4x (in degrees).Since the sum of all angles in a quadrilateral is 360°, we can write the equation as follows;

Sum of all the angles of the quadrilateral = 260 + 30 + 3x + 4x =360

= 290 + 7x = 360

= 70x = 10°

= x = 7°

Now, measure of other two angles = 3x and 4x = 3(10°) and 4(10°)= 30° and 40°

Hence, the measures of those two angles are 30° and 40°.

To know more about quadrilateral visit:

https://brainly.com/question/29934440

#SPJ11

To test the claim that IQ scores of subjects with medium lead levels vary more than IQ scores of subjects with high lead levels, we can use the F-test for comparing variances.

The appropriate null and alternative hypotheses for this test are:

H0: σ1^2 = σ2^2 (The variances of the two populations are equal)

H1: σ1^2 > σ2^2 (The variance of the population with medium lead levels is greater than the variance of the population with high lead levels)

The test statistic for this test is the F-statistic, which is calculated as the ratio of the sample variances:

F = s1^2 / s2^2

where s1^2 is the sample variance of the group with medium lead levels and s2^2 is the sample variance of the group with high lead levels.

To determine the critical value and make a decision about the null hypothesis, we would compare the calculated F-statistic to the critical value from the F-distribution table at a significance level of 0.01. If the calculated F-statistic is greater than the critical value, we would reject the null hypothesis in favor of the alternative hypothesis.

Learn more about variances here: brainly.com/question/32386620

#SPJ11

A square has sides of equal lengths and four right angles while a circle is a geometric shape that has a curved line circumference and radius and are measured in degrees.

The area of a square is found by multiplying the length by the width.

The area of a circle, on the other hand, is found by multiplying π (3.14) by the radius squared.

To find out whether the area of a square with a side length of 2 inches is greater than or less than the area of a circle with a radius of 1.2 inches, we must first calculate the areas of both figures.

Using the formula for the area of a square we get:

Area of a square = side length × side length

Area of a square,

= 2 × 2

= 4 square inches.

Now let's calculate the area of a circle with radius of 1.2 inches, using the formula:

Area of a circle = π × radius squared

Area of a circle,

= 3.14 × (1.2)²

= 4.523 square inches

Since the area of the circle (4.523 square inches) is greater than the area of the square (4 square inches), we can say that the area of the square with a side length of 2 inches is less than the area of a circle with a radius of 1.2 inches.

Therefore, the answer is less than (the area of a circle with radius 1.2 inches).

To know more about circumference visit:

https://brainly.com/question/28757341

#SPJ11

The equation of the circle that forms the section of the rollercoaster is:x² + y² = 900

The shape of this particular section of the rollercoaster is a half of a circle. Center the circle at the origin and assume the highest point on this leg of the roller coaster is 30 feet above the ground.To find the equation of the circle that forms the section of the rollercoaster, we can use the standard form equation of a circle which is:(x - h)² + (y - k)² = r²Where (h, k) is the center of the circle and r is the radius. Since the center is at the origin, h = 0 and k = 0. We only need to find the value of the radius, r.The highest point on the rollercoaster is at the center of the circle. Since it is 30 feet above the ground, it means that the distance from the center to the ground is also 30 feet. Thus, the radius is equal to 30 feet.

Know more about circle  here:

https://brainly.com/question/23799314

#SPJ11

A) A counterexample for ∀x(x² ≥ x) is x = -1.

B) A counterexample for ∀x(x > 0 ∨ x < 0) is x = 0.

C) No counterexample exists for ∀x(x = 1).

A) The statement claims that for all integers x, x² is greater than or equal to x. However, when x = -1, we get (-1)² = 1, which is not greater than or equal to -1.

B) The statement claims that for all integers x, x is either greater than 0 or less than 0. However, when x = 0, it is not greater than 0 nor less than 0, disproving the claim.

C) The statement is not universally quantified, as it claims that every integer x is equal to 1. This is clearly false, as there are many other integers besides 1.

To know more about integer click on below link:

https://brainly.com/question/27908445#

#SPJ11

The equation of this circle in standard form is (x + 1)² + (y - 3)² = 4².

In Mathematics and Geometry, the standard form of the equation of a circle is modeled by this mathematical equation;

(x - h)² + (y - k)² = r²

Where:

Based on the information provided in the graph above, we have the following parameters for the equation of this circle:

Center (h, k) = (-1, 1)

Radius (r) = 4 units.

By substituting the given parameters, we have:

(x - h)² + (y - k)² = r²

(x - (-1))² + (y - 3)² = 4²

(x + 1)² + (y - 3)² = 4²

Read more on equation of a circle here: brainly.com/question/15626679

#SPJ1

Complete Question:

Find the equation of this circle in standard form.

Answer: b

Step-by-step explanation:

took the test

According  to he solving  the selling price of the personal computer, if the businesswoman incurred a loss of 5%, would be $102,600

(a) Calculation of the selling price of the personal computer for 25% profit:

As per the given question, a businesswoman bought a personal computer for $108,000. Now, she wants to sell it to make a profit of 25%.

Thus, the selling price of the personal computer would be equal to the cost price of the computer plus the 25% profit.Using the formula of cost price, we can calculate the selling price of the computer as follows:

Selling Price = Cost Price + Profit

Since the profit required is 25%, we can represent it in decimal form as 0.25.

Therefore, Selling Price = Cost Price + 0.25 × Cost Price

= Cost Price (1 + 0.25)

= Cost Price × 1.25

= $108,000 × 1.25

= $135,000

Therefore, the selling price of the personal computer, if the businesswoman wants to make a profit of 25%, would be $135,000.

(b) Calculation of the selling price of the personal computer if the businesswoman incurred a loss of 5%:Now, let's suppose that during the transportation of the personal computer to the customer, it was damaged, and the businesswoman incurred a loss of 5%.

Therefore, the selling price of the personal computer would be equal to the cost price of the computer minus the 5% loss.As per the given question, the cost of the personal computer is $108,000.

Using the formula of cost price, we can calculate the selling price of the computer as follows:

Selling Price = Cost Price - Loss

Since the loss incurred is 5%, we can represent it in decimal form as 0.05.

Therefore, Selling Price = Cost Price - 0.05 × Cost Price

= Cost Price (1 - 0.05)

= Cost Price × 0.95

= $108,000 × 0.95

= $102,600

Therefore, the selling price of the personal computer, if the businesswoman incurred a loss of 5%, would be $102,600

To know more about selling prices, visit:

https://brainly.com/question/28017453

#SPJ11

The expressions (-5/9) + 7/21 and 7/21 + (-5/9) are equivalent by the commutative property of addition

From the question, we have the following parameters that can be used in our computation:

(-5/9)+7/21=7/21+(-5/9)

Express properly

So, we have

(-5/9) + 7/21 = 7/21 + (-5/9)

The commutative property of addition states that

a + b = b + a

In this case, we have

a = -5/9

b = 7/21

Using the above as a guide, we have the following conclusion

This means that the expressions are equivalent by the commutative property of addition

Read more about expressions at

https://brainly.com/question/15775046

#SPJ1

The correct answer is "formulate H0 and H1." This comparison helps determine whether there is sufficient evidence to reject the null hypothesis and support the alternative hypothesis.

When testing a hypothesis, the first step is to clearly define the null hypothesis (H0) and the alternative hypothesis (H1). The null hypothesis represents the assumption of no effect or no difference, while the alternative hypothesis represents the hypothesis you are trying to support, which typically suggests the presence of an effect or a difference.

After formulating the hypotheses, the subsequent steps in hypothesis testing are as follows:

Collect data and calculate test statistics: Gather relevant data through observations, experiments, or surveys. Then, analyze the data and calculate the appropriate test statistic based on the nature of the hypothesis being tested. The test statistic depends on the specific hypothesis test being used.

Select an appropriate test: Choose a statistical test that is most suitable for the type of data and the research question at hand. The selection of the test depends on factors such as the nature of the data (continuous or categorical), the number of groups being compared, and the assumptions associated with the test.

Choose the level of significance: Determine the desired level of significance (alpha level) for the hypothesis test. The level of significance represents the maximum probability of incorrectly rejecting the null hypothesis. Commonly used alpha levels are 0.05 (5%) or 0.01 (1%), but it can vary depending on the context and the consequences of making Type I errors.

After completing these steps, further analysis involves comparing the calculated test statistic to the critical value or p-value associated with the chosen level of significance. This comparison helps determine whether there is sufficient evidence to reject the null hypothesis and support the alternative hypothesis.

To know more about hypothesis refer to

https://brainly.com/question/29576929

#SPJ11

The mass, in grams, of a piece of metal that has a volume of 3.83.8 cubic centimeters is approximately 0.3 g (rounded to the nearest tenth of a gram).

To determine the mass, in grams, of a piece of metal that has a volume of 3.83.8 cubic centimeters, we can use the proportional relationship between the mass and the volume of the pieces of metal. The table below lists the masses and volumes of several pieces of the same type of metal:

Volume (cubic centimeters)  Mass (grams)

72.7 31.29314.1 47.519112.1 140.239

We can find the mass of a piece of metal that has a volume of 3.83.8 cubic centimeters by using the proportional relationship between the masses and the volumes of the pieces of metal.

Here's how:

1.

We need to find the constant of proportionality that relates the masses and the volumes.

To do this, we can use any two pairs of values from the table.

Let's use the first and second pairs:

(mass) / (volume) = (31.293 g) / (72.7 cm³)

(mass) / (volume) = (47.519 g) / (14.1 cm³)

We can cross-multiply to get:

(31.293 g) × (14.1 cm³) = (72.7 cm³) × (mass)

(47.519 g) × (72.7 cm³) = (14.1 cm³) × (mass)

2.

We can solve for the mass in either equation.

Let's use the first one:

(31.293 g) × (14.1 cm³) = (72.7 cm³) × (mass)

mass = (31.293 g) × (14.1 cm³) / (72.7 cm³)

mass = 6.086 g

We have found that the mass of a piece of metal that has a volume of 72.7 cm³ is 6.086 g.

This means that the constant of proportionality is 6.086 g / 72.7 cm³ ≈ 0.08383 g/cm³.

3.

Finally, we can use the constant of proportionality to find the mass of a piece of metal that has a volume of 3.83.8 cubic centimeters.

We can use this formula:

(mass) / (volume) = 0.08383 g/cm³

mass = (volume) × 0.08383 g/cm³

mass = 3.83.8 cm³ × 0.08383 g/cm³

mass ≈ 0.321 g

Therefore, the mass, in grams, of a piece of metal that has a volume of 3.83.8 cubic centimeters is approximately 0.3 g (rounded to the nearest tenth of a gram).

To know more about constant of proportionality, visit:

https://brainly.com/question/17793140

#SPJ11

Step-by-step explanation:

So the measure of angle O is 360°- 230°

<O= 360°- 230°

= 130°

And to get <X it is intrusive angle is the half of suspended arc.

< X = 230°/ 2

< X = 115°

Answer: x=1115

Step-by-step explanation:

The coordinates of the point on the directed line segment from (−3,−5) to (7,10) that partitions the segment into a ratio of 2 to 3 are (1 + √3, 4 + √6) and (1 - √3, 4 - √6).

To find the coordinates of the point that partitions the segment from (−3,−5) to (7,10) into a ratio of 2:3, we can use the ratio formula.

Let (x, y) be the coordinates of the point we're looking for. Then the distance from (−3,−5) to (x,y) is 2/5 of the total distance, and the distance from (x,y) to (7,10) is 3/5 of the total distance.

Using the distance formula, we can find the total distance between the two points:

d = √[(7 - (-3))² + (10 - (-5))²] = √[(10)² + (15)²] = √325

The distance from (−3,−5) to (x,y) is (2/5)√325, and the distance from (x,y) to (7,10) is (3/5)√325.

We can set up two equations based on the coordinates:

(x - (-3))² + (y - (-5))² = (2/5)√325)²

(x - 7)² + (y - 10)² = (3/5)√325)²

Expanding and simplifying these equations, we get:

(x + 3)² + (y + 5)² = 52

(x - 7)² + (y - 10)² = 117

Solving these equations simultaneously will give us the coordinates of the point that partitions the line segment into a 2:3 ratio. One possible method is to solve for y in terms of x in both equations, and then set the two expressions equal to each other:

(x + 3)² + (y + 5)² = 52

(x - 7)² + (y - 10)² = 117

y = -5 ± √(52 - (x + 3)²)

y = 10 ± √(117 - (x - 7)²)

-5 ± √(52 - (x + 3)²) = 10 ± √(117 - (x - 7)²)

Squaring both sides of the equation and simplifying, we get:

x² - 2x + 28 = 0

This quadratic equation has two solutions:

x = 1 ± √3

Substituting each value of x into either equation for y, we get the coordinates of the two points that partition the segment into a 2:3 ratio:

(1 + √3, 4 + √6) and (1 - √3, 4 - √6)

To learn more about coordinates click on,

https://brainly.com/question/20489781

#SPJ1

The given WFF is equivalent to "true" using logical equivalences. Therefore, it is a tautology.

To show that a well-formed formula (WFF) is a tautology, we need to demonstrate that it is logically equivalent to the statement "true" regardless of the truth values assigned to its variables. Let's analyze the given WFF step by step and apply logical equivalences to show that it is equivalent to "true."

The given WFF is:

A → (¬A v ¬B) v B

We'll use logical equivalences to transform this expression:

Implication Elimination (→):

A → (¬A v ¬B) v B

≡ ¬A v (¬A v ¬B) v B

Associativity (v):

¬A v (¬A v ¬B) v B

≡ (¬A v ¬A) v (¬B v B)

Negation Law (¬P v P ≡ true):

(¬A v ¬A) v (¬B v B)

≡ true v (¬B v B)

Identity Law (true v P ≡ true):

true v (¬B v B)

≡ true

Hence, we have shown that the given WFF is equivalent to "true" using logical equivalences. Therefore, it is a tautology.

To know more about tautology refer to

https://brainly.com/question/30195011

#SPJ11

The required exponential regression equation is y = 6682 · 0.949ˣ

Given is a table we need to create an exponential regression for the same,

The exponential regression is give by,

y = a bˣ,

So here,

x₁ = 4, y₁ = 5,434

x₂ = 6, y₂ = 4,860

x₃ = 10, y₃ = 3963

Therefore,

Fitted coefficients:

a = 6682

b = 0.949

Exponential model:

y = 6682 · 0.949ˣ

Hence the required exponential regression equation is y = 6682 · 0.949ˣ

Learn more about exponential regression equation click;

https://brainly.com/question/12480134

#SPJ1

The area of the trapezium is 160 + 5b/2 square meters.

Given data:

The sum of the parallel sides of a trapezium-shaped field is 32 m.

Distance between the two parallel sides is 10 m.

To find: The area of the trapezium

Formula: Area of a trapezium is given by the formula,

A = 1/2 (a+b)h,

Where, a and b are the length of parallel sides,

h is the perpendicular distance between two parallel sides.

Calculation:

Given that the sum of parallel sides is 32 m, a+b = 32 (Equation 1)

And, distance between two parallel sides is 10 m, h = 10 m.

Now, we can calculate the length of one of the parallel sides.

Substituting the value of a from equation (1) in the above formula we get,

32-b/2 × 10 = A

Which gives, 160 - b/2 = A

Thus, we get the area of the trapezium by putting the values in the formula,

A = 1/2 (a+b)h

A = 1/2 (32+b)×10

A = 160 + 5b/2

So, the area of the trapezium is 160 + 5b/2 square meters.

To know more about trapezium visit:

https://brainly.com/question/22607187

#SPJ11

Answer: The Total number of Students who like Milk is 12 and the total number of Students who like Tea is 9.

Step-by-step explanation:

Let us start off by subtracting the number of students who like both milk and tea from the total number of students:

33-12 = 21

Rest of the 21 Students like either Milk or Tea. Now with the help of the ratio, we find the total number of students who like Milk alone:

21 x  4/7 = 12

(4 Being the ratio of students who like Milk and 7 being the total ratio of 4+3 )

12 Students like Milk while:

21-12= 9 (or) 21 x 3/7= 9

9 Students like Tea.