Select the correct answer.

A 20.0-liter flask contains a mixture of argon at 0.72 atmosphere and oxygen at 1.65 atmospheres. What is the total pressure in the flask?

A. 0.93 atm
B. 2.37 atm
C. 8.44 atm
D. 18.6 atm​

Answer:

increase concentration of reactants

Explanation:

I took the test

Considering the definition of pH, the pH is 6.35 and the solution is acidic.

pH is the Hydrogen Potential and it is a measure of acidity or alkalinity. pH indicates the amount of hydrogen ions present in a solution or substance.

Mathematically, pH is calculated as the negative base 10 logarithm of the activity of hydrogen ions:

pH= - log [H⁺]

The numerical scale that measures the pH of substances includes the numbers from 0 to 14. The pH value 7 corresponds to neutral substances. Acidic substances are those with a pH lower than 7, while basic substances have a pH higher than 7.

In this case, being [H⁺]=4.5×10⁻⁷ M, you can replace this value in the definition of pH:

pH= -log (4.5×10⁻⁷ M)

Solving:

pH= 6.35

Finally, the pH is lower than 7, the solution is acidic.

Learn more about pH:

brainly.com/question/3992824

#SPJ1

A silent mutation is a type of mutation that has no effect on protein function. This is because the mutation does not change the amino acid sequence of the protein.

Silent mutations can happen when a single base pair in the DNA is altered without changing the amino acid that the codon is meant to encode. For instance, a silent mutation could turn the initial G in the codon for the amino acid alanine from GCG to A, creating the codon GCA. The function of the protein is unaffected since the codon GCA still codes for the amino acid alanine.

The most frequent sort of mutation is a silent mutation, which can be brought on by a number of things, including mistakes in DNA replication, contact with environmental mutagens, and random chance. Silent mutations typically have no detrimental effects on the organism.

Learn more about silent mutations here : brainly.com/question/30280461

#SPJ1

The diagram shows a picture of a compound.

A compound is a substance that is made up of two or more different elements that are chemically bonded together in a specific ratio.

This means that the elements are combined in a way that creates a new substance with different physical and chemical properties than the individual elements.

Compounds can be formed through a variety of chemical reactions, such as combining elements through a chemical bond or through a reaction between an acid and a base.

So for the given diagram, we can see that it represents two or more elements chemically combined.

Learn more about a compound here: https://brainly.com/question/29108029

#SPJ1

The pH of the solution is 10.82.

To solve this problem, we need to determine the concentration of the hydronium ion ([tex]H_3O^+[/tex]) in the solution. This can be done using the following steps:

Write the balanced chemical equation for the reaction between HBr and CH₃NH₂.

HBr + CH₃NH₂ → CH₃NH₃⁺ + Br⁻

Write the expression for the base dissociation constant (Kb) for CH₃NH₂.

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

Calculate the concentration of hydroxide ions (OH⁻) in the solution using the Kb value and the concentration of CH₃NH₂.

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

4.4 × 10⁻⁴ = x² / (0.400 M)

x = 6.63 × 10⁻³ M

[OH⁻] = 6.63 × 10⁻³ M

Calculate the concentration of [tex]H_3O^+[/tex] using the equilibrium constant for the reaction between HBr and [tex]H_2O[/tex].

[tex]HBr + H_2O = H_3O^+ + Br^-[/tex]

[tex]Kw = [H_3O^+][OH^-] = 1.0 * 10^{-14}\\[H_3O^+] = Kw/[OH-] = 1.51 * 10^{-11}[/tex]

Calculate the pH using the concentration of [tex]H_3O^+[/tex].

[tex]pH = -log[H_3O^+]\\pH = -log(1.51 * 10^{-11})[/tex]

pH = 10.82

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

Five properties that make acids different from bases include their pH, conductivity, taste, texture, and reactivity.

The names of the given acids and bases are:

1. Hydrogen fluoride

2. Potassium hydroxide

3. Hydrogen sulfate

4. Calcium hydroxide

5. Barium hydroxide

6. Hydrogen nitroxide

7. Barium hydroxide

8. Hydrogen sulfide

9. Aluminum hydroxide

10. Dihydrogen phosphate

Acids can be differentiated from bases by their taste, pH, texture, reactivity, etc. Acids typically have a sour taste while bases have a bitter taste. Acids also have a pH less than 7while bases have a pH greater than 7.

Acids and bases also differ in their texture. Acids have a sticky texture while bases have a slippery texture. The conductivity of acids is also greater than those of bases.

Learn more about acids and bases here:

https://brainly.com/question/9836972

#SPJ1

The steps in the engineering process in order is D. Identifying a problem, brainstorming solutions, researching the background of each solution, testing solutions, choosing a solution, production, making future improvements.

The initial step involves recognizing the predicament that requires resolution. One may achieve this through collaborating with fellow engineers, consulting customers, or conducting studies. After recognizing the issue at hand, the subsequent course of action involves generating ideas or solutions to address it. One way to achieve this is to generate a large number of ideas.

The subsequent phase necessitates the experimentation of potential answers. To achieve this, one must take into account both the outcomes of the assessments and the advantages and disadvantages associated with every proposed resolution. The subsequent action entails generating the resolution. One way to accomplish this is to create a prototype, while another is to manufacture the solution in large quantities. The last stage involves enhancing forthcoming developments.

Find out more on the engineering process at https://brainly.com/question/19369851

#SPJ1

0.4141 grams of hydrogen gas will be produced from the reaction.

The balanced chemical equation for the reaction between hydrochloric acid (HCl) and zinc (Zn) can be written as follows:

2 HCl + Zn → ZnCl2 + H2

To determine the grams of hydrogen gas produced by each reactant, we need to use the concept of stoichiometry. First, we calculate the number of moles of each reactant.

The molar mass of HCl is approximately 36.5 g/mol, and the molar mass of Zn is approximately 65.4 g/mol.

For hydrochloric acid (HCl):

Number of moles = Mass / Molar mass = 7.5 g / 36.5 g/mol = 0.205 moles

For zinc (Zn):

Number of moles = Mass / Molar mass = 6.5 g / 65.4 g/mol = 0.0993 moles

According to the balanced equation, the mole ratio between HCl and H2 is 2:1. Therefore, for 0.205 moles of HCl, the theoretical yield of H2 is 0.205 moles.

The molar mass of hydrogen gas (H2) is approximately 2.02 g/mol.

To determine the mass of hydrogen gas produced:

Mass of H2 = Number of moles of H2 × Molar mass of H2

          = 0.205 moles × 2.02 g/mol

          = 0.4141 g

Therefore, 0.4141 grams of hydrogen gas will be produced from the reaction.

for more questions on hydrogen
https://brainly.com/question/24433860
#SPJ8

Dietary fats include polyunsaturated fat. Along with monounsaturated fat, it is one of the good fats. Foods like salmon, vegetable oils, and other plant- and animal-based foods include polyunsaturated fat. They act as precursors of other molecules. The given statement is true.

Precursors of eicosanoids with hormone-like properties including prostaglandins, leukotrienes, and thromboxanes are polyunsaturated fatty acids (PUFA).

Dihomo-linolenic acid (DGLA), arachidonic acid (AA), and eicosapentaenoic acid (EPA) are the three precursors that prostaglandins can be formed from. Depending on the precursor, series 1, 2, or 3 prostanoids is produced.

To know more about Polyunsaturated fatty acids, visit;

https://brainly.com/question/12409149

#SPJ1

The compound that contains sterogenic centre is the 1,3,4-trichloropentane. That is option F.

Sterogenic centers are found in compounds where a carbon atom share four bonds to the carbon atom with each to different elements or functional groups.

From the list of example given above, the carbon atom of which Ch the second chloride is attached to is sharing bonds with carbon, hydrogen, chloride and another carbon.

Learn more about atom here:

https://brainly.com/question/20994647

#SPJ1

Answer:

I guess correct option is A.

Answer:As hydrogen atoms collide to create helium, enormous quantities of energy are released, heating the gas. This process, known as nuclear fusion, is what causes stars to shine. The pull of gravity inward is resisted by the heated gas as it pushes outward.

Explanation:

Answer:

The molarity of Carl's sugar solution can be calculated using the formula:

Molarity = moles of solute / liters of solution

First, we need to determine the number of moles of sucrose in the solution. We can do this using the formula:

moles = mass / molar mass

The mass of sucrose is 400 grams, and the molar mass is 342.3 g/mol:

moles = 400 g / 342.3 g/mol

moles = 1.167 mol

Now we can calculate the molarity by dividing the moles by the liters of solution (which is 1.00 L):

Molarity = 1.167 mol / 1.00 L

Molarity = 1.2 M

Therefore, the molarity of Carl's sugar solution is 1.2 M. Answer: 1.2 M.

Explanation:

Water vapor has latent heat energy, which is absorbed or released during the process of changing states from liquid to gas or gas to liquid.When the sun's radiant energy hits the Earth's oceans, it causes the water molecules to absorb this energy and become more energized.

This leads to the water molecules breaking apart and transforming into water vapor, which is a gaseous state of water. Water vapor has a specific form of energy known as latent heat. This is the energy required to change the physical state of water from a liquid to a gas or from a gas to a liquid. The process of converting water into water vapor requires energy, and this energy is stored in the water vapor in the form of latent heat.

The amount of latent heat absorbed or released by water vapor is dependent on the temperature and pressure conditions. When the water vapor condenses back into liquid form, this latent heat is released into the atmosphere. This process plays a critical role in weather and climate patterns as it drives the movement of heat and moisture throughout the Earth's atmosphere.

In summary, water vapor has latent heat energy, which is absorbed or released during the process of changing states from liquid to gas or gas to liquid. This energy plays a vital role in the Earth's weather patterns and is a critical component of the Earth's energy balance.

For more such questions on heat energy

https://brainly.com/question/934320

#SPJ11

If the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77 and the solution is basic.

To calculate the pOH of a solution, we can use the formula:

pOH = -log[OH-]

Given that the [OH-] concentration is 5.9 x 10^(-M), we can substitute this value into the formula:

pOH = -log(5.9 x 10^(-M))

Calculating this expression, we find:

pOH = -log(5.9 x 10^(-M))

pOH ≈ -log(5.9) + (-log(10^(-M)))

Since log(10^(-M)) is equal to -M, the equation simplifies to:

pOH ≈ -log(5.9) - M

Now, we need the value of M (the exponent) to calculate the exact pOH value. It appears that the value of M is missing in the given information. However, assuming M is a positive value, we can continue the calculation.

If we consider M = 6, for instance, the equation becomes:

pOH ≈ -log(5.9) - 6

Now, we can evaluate the expression:

pOH ≈ 1.23 - 6

pOH ≈ -4.77

Therefore, if the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77.

To determine whether the solution is acidic, basic, or neutral, we can use the relationship between pH and pOH. The sum of the pH and pOH of a solution at 25°C is always equal to 14.

Since pOH = -4.77, the pH would be:

pH = 14 - pOH

pH ≈ 14 - (-4.77)

pH ≈ 18.77

A solution with a pH above 7 is considered basic. In this case, the calculated pH is greater than 7. Therefore, the solution is basic.

for more questions on pOH
https://brainly.com/question/1420583
#SPJ11

The energy of light with a wavelength of 589 nm is approximately 3.36 × 10^(-19) Joules.

To calculate the energy of light, we can use the equation E = hc/λ, where E represents the energy, h is Planck's constant (6.626 × 10^(-34) J·s), c is the speed of light in a vacuum (3.00 × 10^8 m/s), and λ is the wavelength of light.

Given that the wavelength is 589 nm (which is equivalent to 589 × 10^(-9) m), we can substitute the values into the equation:

E = (6.626 × 10^(-34) J·s × 3.00 × 10^8 m/s) / (589 × 10^(-9) m)

Simplifying the equation, we get:

E = (1.9778 × 10^(-25) J·m) / (5.89 × 10^(-7) m)

Dividing these values, we find:

E ≈ 3.36 × 10^(-19) J

For more such questions on energy

https://brainly.com/question/30128198

#SPJ11

Coal supplies the energy for the majority of the power that people use today, and everyone benefits, either directly or indirectly, from the usage of coal. Option A is correct.

Coal is a significant source of energy for electricity generation, and electricity is a fundamental component of modern society. The electricity produced by coal benefits everyone, either directly or indirectly. It powers homes, businesses, and industries and provides the power necessary for transportation, communication, and other essential services.

However, the use of coal can also have negative impacts on the environment and human health, including air and water pollution, greenhouse gas emissions, and coal mining accidents. It is crucial to balance the benefits and drawbacks of coal use and consider alternative sources of energy to meet the increasing energy demands sustainably. Option A is correct.

To know more about the Electricity, here

https://brainly.com/question/31659991

#SPJ1

Answer:

Hydrogen H 3.330% Carbon C 26.450% Oxygen O 35.234%

Explanation:

Answer:

Explanation:

pOH = -log1.36 X 10^-10 = 9.87

pH = 14-pOH = 14-8.97 = 5.03

The majority of laboratory equipment is constructed of glass, since it is an easy-to-clean material and allows for good vision. The majority of the chemicals used in studies don't react with it.

The fact that glass equipment is transparent, which enables researchers to easily monitor the chemical reactions and physical changes occurring within, is one of its main advantages.

This is especially crucial in investigations when the reaction's color or appearance is crucial to comprehending the underlying chemistry. The majority of the chemicals used in studies don't react with it.

Learn more about laboratory, here:

https://brainly.com/question/27748008

#SPJ1

The mass (in grams) of sodium carbonate, Na₂CO₃ required to produce 85 grams of barium carbonate, BaCO₃ is 45.7 grams

The mass of sodium carbonate, Na₂CO₃ required to produce 85 grams of barium carbonate, BaCO₃ can be obtained as follow:

Na₂CO₃ + BaSO₄ -> BaCO₃ + Na₂SO₄

From the balanced equation above,

197 g of BaCO₃ were obtained from 106 g of Na₂CO₃

Therefore,

85 g of BaCO₃ will be obtain from = (85 × 106) / 197 = 45.7 g of Na₂CO₃

Thus, we can conclude that the mass of sodium carbonate, Na₂CO₃ required is 45.7 grams

Learn more about mass needed:

https://brainly.com/question/29263739

#SPJ1

If matter is left in the same environment  and no heat is  added,  it  will not change states.

Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of same type.

Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.

The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.

Learn more about matter,here:

https://brainly.com/question/9477180

#SPJ1

Heat transfer plays a crucial role in various aspects of our everyday lives. Here are five examples of how heat transfer occurs in our daily activities:

Cooking; Cooling; Central Heating; Ironing; Showering

Cooking: Heat is transferred from a stove or an oven to the cooking utensils and food. Conduction occurs when the heat is transferred through direct contact between the heat source and the cooking pan. Convection takes place when hot air circulates around the food, evenly cooking it. Radiation is also involved when heat is emitted by the heating elements and absorbed by the food.

Cooling: Heat transfer is essential in cooling processes, such as using refrigerators or air conditioning systems. In refrigeration, heat is transferred from the interior of the refrigerator to the outside environment through the process of convection and radiation. In air conditioning, heat is absorbed from the indoor air and released outside, again utilizing convection and radiation.

Central Heating: Many homes and buildings use central heating systems to warm up indoor spaces. Heat is produced by a furnace or boiler and then distributed through convection and radiation. Radiators or air vents release the heated air, raising the temperature in the rooms.

Ironing: Ironing clothes involves the transfer of heat to remove wrinkles. The iron's heating element conducts heat to the metal plate, which comes into direct contact with the fabric. Conduction transfers heat from the iron to the clothes, causing the fibers to relax and remove the wrinkles.

Showering: When taking a hot shower, heat transfer is involved in multiple ways. Firstly, conduction occurs as the hot water comes into contact with your skin, transferring heat. Secondly, convection takes place as the warm water surrounds your body, creating a warm sensation. Lastly, radiation occurs as the hot water radiates heat, making the shower enclosure feel warm.

These are just a few examples, but heat transfer is involved in numerous other activities, from using hairdryers to heating water for tea. Understanding heat transfer is crucial for designing efficient systems and ensuring our comfort and safety in everyday life.

For more question on Heat click on

https://brainly.com/question/30738335

#SPJ11

Answer:

C3H7O + O2 → CO2 + H2O

Explanation:

a) The full symbol equation for the oxidation reaction of an isomer of C3H7O can be represented as:

C3H7O + O2 → CO2 + H2O

b) The proper reagent for this oxidation reaction is O2 (oxygen gas). The catalyst required for this reaction depends on the specific conditions. Common catalysts used for oxidation reactions include transition metals such as platinum (Pt), palladium (Pd), or copper (Cu).

c) There is no need to remove the product (CO2 and H2O) from the reaction vessel because they are typically in the gas or liquid phase and do not significantly interfere with the reaction. The product gases can be easily vented out of the vessel, while the liquid water can be left in the reaction mixture. Additionally, the product CO2 is a stable and inert gas, which does not pose any hazards in most cases. Therefore, it is often not necessary to remove the products after the reaction is complete.

Answer:

Explanation:

Charles Law

V1/T1 = V2/T2

T2= T1V2/V1  = 384.15 X 3/2=576.23K or 303.08 Celsius

According to the information, we can infer that the pie chart shows 1/8 of its surface corresponding to protein and fat, 1/2 would be carbohydrates and 1/4 would be fibers.

To draw a pie chart with the information from the nutritional table, we must take into account that the portions in grams are given with respect to a quantity of 100g of food. Therefore, if it says that it has 12.5g, it is equal to 12.5% of its content. Then we can infer that each grammage is equal to the percentage of that compound in the food.

Learn more about the pie chart in: https://brainly.com/question/1109099

#SPJ1

The concentration of aluminum in the solution is 6.0M, and the concentration of sulfate is 9.0M.

In a 3.0M solution of aluminum sulfate (Al2(SO4)3), the concentration of aluminum and sulfate can be determined by considering the stoichiometry of the compound.

From the chemical formula, we can see that one molecule of aluminum sulfate contains two aluminum ions (Al3+) and three sulfate ions (SO4^2-).

The concentration of aluminum can be calculated by multiplying the molarity of the solution by the number of moles of aluminum ions in one molecule of aluminum sulfate. The concentration of aluminum would be:

Concentration of aluminum = 2 x 3.0M = 6.0M

Therefore, the concentration of aluminum in the 3.0M solution of aluminum sulfate is 6.0M.

Similarly, the concentration of sulfate can be calculated by multiplying the molarity of the solution by the number of moles of sulfate ions in one molecule of aluminum sulfate. The concentration of sulfate would be:

Concentration of sulfate = 3 x 3.0M = 9.0M

Therefore, the concentration of sulfate in the 3.0M solution of aluminum sulfate is 9.0M.

In summary, the concentration of aluminum in the solution is 6.0M, and the concentration of sulfate is 9.0M.

for more questions on concentration

https://brainly.com/question/28564792

#SPJ11

The type of weathering that occurred at the XIT Ranch after a very cold winter causing new cracks in the landscape is frost wedging. From 1885 to 1912, the Texas Panhandle's XIT Ranch served as a cattle ranch.

The ranch was one of the largest in the world at the time, with an original area of ​​over 3 million acres. It was established as a joint venture between the state of Texas and Capital Syndicate, a group of Chicago-based businessmen. The ranch had a tremendous influence on the history of the American West, and Texas continues to be influenced by it today.

Therefore, the correct option is A.

Learn more about Ranch here:

https://brainly.com/question/30841932

#SPJ1

Your question is incomplete, most probably the complete question is:

The XIT Ranch is located in the Panhandle ecoregion of Texas. After a very cold winter, the vaqueros of the XIT Ranch found that several new cracks had opened in the landscape. What type of weathering occurred at the XIT Ranch?

Answer: 14.0

Explanation: 14.0 is a base. The more basic, the less hydrogen ion concentration.

The new volume of the sample of argon, in L, will be 1.43 L.

At STP (Standard Temperature and Pressure), the temperature is 0 °C (273 K) and the pressure is 1 atm. Therefore, the initial conditions can be expressed as:

T1 = 273 K

P1 = 1 atm

V1 = 1.20 L

To find the new volume, we can use the combined gas law:

(P1V1) / T1 = (P2V2) / T2

We can rearrange this equation to solve for V2:

V2 = (P1V1T2) / (P2T1)

Substituting the given values, we get:

V2 = (1 atm x 1.20 L x 301 K) / (0.800 atm x 273 K)

V2 = 1.43 L

At a temperature of 28.0 °C and a pressure of 0.800 atm, the new volume of the argon sample is 1.43 L.

To know more about the Pressure, here

https://brainly.com/question/18698171

#SPJ1