Select the correct answer. Which of the following is not a result or consequence of rising average air temperatures on Earth? A. Glaciers and ice sheets melt. B. Sea levels rise. C. Evaporation increases. D. Salinity increases.

Answers

Answer 1

The correct option which is not a result or consequence of rising average air temperatures on Earth is (D) Salinity increases.

Salinity does not increase as a result of increasing air temperature. Salinity is the amount of salt in water. The amount of salt in water can increase due to evaporation and water loss, which leaves salt behind, or the addition of salt from land sources such as runoff. The consequence of rising average air temperature on Earth includes; Glaciers and ice sheets melt which causes sea levels to rise: With increased temperatures, ice on land is melting and flowing into the oceans, raising sea levels. This can lead to coastal flooding, beach erosion, and the displacement of communities living near coastlines. Evaporation increases which leads to changes in precipitation patterns: The increase in temperature leads to an increase in evaporation. The amount of water vapor in the air increases, which can lead to more intense precipitation in some areas and droughts in others. In summary, as the average air temperature continues to rise, the Earth's climate will continue to change, leading to various consequences such as melting of glaciers and ice sheets, increase in sea level, and changes in precipitation patterns. Salinity, however, is not affected by rising average air temperatures on Earth.

learn more about Salinity Refer: https://brainly.com/question/1807933

#SPJ11


Related Questions

A charge of 4. 5 × 10-5 C is placed in an electric field with a strength of 2. 0 × 104 StartFraction N over C EndFraction. If the charge is 0. 030 m from the source of the electric field, what is the electric potential energy of the charge? J.

Answers

The electric potential energy of the charge is 2.7 J. The formula to calculate electric potential energy is U = q × V, where U is the potential energy, q is the charge, and V is the electric potential. Plugging in the given values, U = (4.5 × 10^-5 C) × (2.0 × 10^4 N/C) × (0.030 m) = 2.7 J.

The electric potential energy (U) of a charged object in an electric field is given by the formula U = q × V, where q is the charge of the object and V is the electric potential at the location of the object.

In this case, the charge (q) is 4.5 × 10^-5 C, and the electric field strength (V) is 2.0 × 10^4 N/C. The distance of the charge from the source of the electric field is given as 0.030 m.

Plugging in the values into the formula, we have U = (4.5 × 10^-5 C) × (2.0 × 10^4 N/C) × (0.030 m). Simplifying the expression, we get U = 2.7 J.

Therefore, the electric potential energy of the charge is 2.7 Joules.

learn more about electric  here:

https://brainly.com/question/31173598

#SPJ11

A 550 N physics student stands on a bathroom scale in an 850 kg (including the student) elevator that is supported by a cable. As the elevator starts moving, the scale reads 450 N. Find the acceleration (magnitude and direction) of the elevator, What is the acceleration is the scale reads 670 N? (c) If the scale reads zero, should the student worry?

Answers

If the scale reads zero, this means there is no normal force acting on the student, and they are in free-fall. The student should indeed be worried, as the elevator is likely in a state of mechanical failure and is falling freely.

The first step is to draw a free-body diagram for the student and the elevator. There are two forces acting on the elevator-student system: the force of gravity (weight) and the force of tension from the cable. When the elevator is moving, there is also an additional force of acceleration.

(a) To find the acceleration of the elevator when the scale reads 450 N, we need to use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration: F_net = ma. In this case, the net force is the difference between the weight and the tension: F_net = weight - tension. So we have:

F_net = ma
weight - tension = ma

Substituting the given values:

550 N - 450 N = (850 kg)(a)

Solving for a:

a = 1.18 m/s^2, upward (because the elevator is moving upward)

(b) To find the acceleration of the elevator when the scale reads 670 N, we use the same formula:

F_net = ma
weight - tension = ma

Substituting the given values:

550 N - 670 N = (850 kg)(a)

Solving for a:

a = -0.14 m/s^2, downward (because the elevator is moving downward)

(c) If the scale reads zero, it means that the tension in the cable is equal to the weight of the elevator-student system, so there is no net force and no acceleration. The student does not need to worry, but they may feel weightless for a moment if the elevator is in free fall.

(a) When the scale reads 450 N, we can determine the acceleration of the elevator using the following steps:

1. Calculate the net force acting on the student: F_net = F_gravity - F_scale = 550 N - 450 N = 100 N.
2. Use Newton's second law (F = ma) to find the acceleration: a = F_net / m_student, where m_student = 550 N / 9.81 m/s² ≈ 56.1 kg.
3. Solve for the acceleration: a = 100 N / 56.1 kg ≈ 1.78 m/s², downward.

(b) If the scale reads 670 N, follow the same steps as before, but replace F_scale with the new reading:

1. Calculate the net force: F_net = F_gravity - F_scale = 550 N - 670 N = -120 N.
2. Solve for the acceleration: a = F_net / m_student = -120 N / 56.1 kg ≈ -2.14 m/s², upward.

To know more about acceleration visit:-

https://brainly.com/question/30660316

#SPJ11

At what distance from a 15W point source of electromagnetic waves is the magnetic field amplitude 0.60μT ?
Express your answer to two significant figures and include the appropriate units.

Answers

The magnetic field amplitude of the electromagnetic wave from the 15W point source is 0.60 μT at a distance of 2.10 m.

To solve this problem, we can use the equation for the magnetic field amplitude (B) of an electromagnetic wave at a certain distance (r) from the source:

B = (μ0/4π) * (2πf) * (r^-1) * E

where μ0 is the permeability of free space (4π x 10^-7 T·m/A), f is the frequency of the wave, E is the electric field amplitude, and r is the distance from the source.

We are given that the source has a power output of 15W, but we do not know the frequency of the wave or the electric field amplitude. However, we do know that the magnetic field amplitude at a certain distance is 0.60 μT. So we can rearrange the equation to solve for r:

r = (μ0/4π) * (2πf) * (E/B)

We can assume that the frequency of the wave is constant, so we can combine the constants in the equation and substitute the values:

r = (1.26 x 10^-6 m) * (E/B)

We need to find the value of r that makes B = 0.60 μT. Let's assume that E is also constant and solve for r:

r = (1.26 x 10^-6 m) * (E/0.60 x 10^-6 T)

r = 2.10 m.

Learn more about electromagnetic wave at: https://brainly.com/question/13803241

#SPJ11

A wire carries a current. If both the wire radius is halved and the current is doubled, the electron drift velocity changes by a factor of: A.2 B.4 C.1/4 D.1/8 E.8

Answers

The electron drift velocity is defined as the average velocity of electrons moving through a wire due to an applied electric field. Therefore, the answer is C.1/4.

This velocity depends on the wire's cross-sectional area, the current passing through it, and the number density of free electrons in the wire.

When the wire radius is halved, the cross-sectional area of the wire is reduced by a factor of 4 (since the area of a circle is proportional to the square of its radius). This means that the wire can accommodate fewer electrons, and so the number density of free electrons in the wire increases by a factor of 4.
When the current passing through the wire is doubled, the force on the electrons is increased, and so the electrons move faster. The relationship between current, force, and electron drift velocity is given by the equation v = (I/neA), where v is the electron drift velocity, I is the current, n is the number density of free electrons, e is the charge of an electron, and A is the cross-sectional area of the wire.
Plugging in the new values, we get:
v' = (2I)/(4neA/2)
v' = (2I)/(2neA)
v' = I/neA
This means that the electron drift velocity does not change when the wire radius is halved and the current is doubled.

For more such question on electron

https://brainly.com/question/371590

#SPJ11

The electron drift velocity in a wire is directly proportional to the current and inversely proportional to the wire radius.

If the wire radius is halved, the electron drift velocity will be doubled, and if the current is doubled, the electron drift velocity will also be doubled. Therefore, the overall change in the electron drift velocity would be a factor of 4, and the correct answer is B.4.
If both the wire radius is halved and the current is doubled, the electron drift velocity changes by a factor of A.2 B.4 C.1/4 D.1/8 E.8.
To answer this, let's consider the formula for current (I) in a wire:
I = n * A * e * v
where:
- I = current
- n = number of free electrons per unit volume
- A = cross-sectional area of the wire
- e = charge of an electron
- v = electron drift velocity
When the wire radius is halved, the cross-sectional area (A) is reduced by a factor of 4, because A = π * r^2.
When the current is doubled, I = 2 * I₀, where I₀ is the initial current.
Now, let's compare the initial and new situations:
I₀ = n * A₀ * e * v₀
2 * I₀ = n * (A₀ / 4) * e * v₁
Divide the second equation by the first:
2 = (1/4) * (v₁ / v₀)
Solve for the ratio of the new drift velocity (v₁) to the initial drift velocity (v₀):
v₁ / v₀ = 8
So, the electron drift velocity changes by a factor of 8 (Option E).

Visit here to learn more about electron drift velocity:

brainly.com/question/1599996

#SPJ11

An object has a height of 0.064 m and is held 0.240 m in front of a converging lens with a focal length of 0.140 m. (Include the sign of the value in your answers.)
(a) What is the magnification?
(b) What is the image height?
m

Answers

(a) To find the magnification, we first need to determine the image distance (q). We can use the lens formula:
1/f = 1/p + 1/q


where f is the focal length (0.140 m), p is the object distance (0.240 m), and q is the image distance. Rearranging the formula to solve for q:
1/q = 1/f - 1/p
1/q = 1/0.140 - 1/0.240
1/q = 0.00714
q = 1/0.00714 ≈ 0.280 m
Now, we can find the magnification (M) using the formula:
M = -q/p
M = -0.280/0.240
M = -1.17
The magnification is -1.17.
(b) To find the image height (h'), we can use the magnification formula:
h' = M × h
where h is the object height (0.064 m). Plugging in the values:
h' = -1.17 × 0.064
h' ≈ -0.075 m
The image height is approximately -0.075 meters. The negative sign indicates that the image is inverted.

To know more about magnification visit:

https://brainly.com/question/21370207

#SPJ11

If an electron with a mass of

9. 109x10^-31kg had an momentum of 2. 000x10^-27kg m/s north what is its velocity

Answers

The velocity of the electron is 2.2x10^3 m/s north. This is calculated by dividing the momentum (2.000x10^-27 kg m/s) by the mass (9.109x10^-31 kg) of the electron.

The momentum of an object is given by the product of its mass and velocity. In this case, the momentum is provided (2.000x10^-27 kg m/s) and the mass of the electron is given (9.109x10^-31 kg). By dividing the momentum by the mass, we can find the velocity. Thus, 2.000x10^-27 kg m/s divided by 9.109x10^-31 kg equals approximately 2.2x10^3 m/s north, which is the velocity of the electron.The velocity of the electron is 2.2x10^3 m/s north. This is calculated by dividing the momentum (2.000x10^-27 kg m/s) by the mass (9.109x10^-31 kg) of the electron.

The momentum of an object is given by the product of its mass and velocity. In this case, the momentum is provided (2.000x10^-27 kg m/s) and the mass of the bis given (9.109x10^-31 kg). By dividing the momentum by the mass, we can find the velocity.

learn more about velocity here:

https://brainly.com/question/22967454

#SPJ11

light travels at 186,283 miles every second. how many feet per hour does light travel? round your answer to one decimal place, if necessary.

Answers

To find out how many feet per hour light travels, we need to convert miles per second to feet per hour. There are 5280 feet in a mile and 60 minutes in an hour, so we can use the following formula:

186,283 miles/second * 5280 feet/mile * 60 seconds/minute * 60 minutes/hour = 671,088,960,000 feet/hour

Therefore, light travels at approximately 671 billion feet per hour.

This is an incredibly fast speed, and it is important to note that nothing can travel faster than the speed of light. The speed of light has a profound impact on our understanding of the universe and has led to many scientific breakthroughs, including the theory of relativity. Understanding the properties of light and how it interacts with matter is crucial for fields such as optics, astronomy, and physics.

To know more about properties of light click this link-

brainly.com/question/9601852

#SPJ11

the helix nebula is a planetary nebula with an angular di- ameter of 16’ that is located approximately 200 pc from earth. 1. what is a planetary nebula? 2. calculate the diameter of the nebula.

Answers

1. A planetary nebula is a type of emission nebula consisting of an expanding, glowing shell of ionized gas ejected from a red giant star in the last stage of its life. 2.  the diameter of the Helix Nebula is approximately 2.5 × 10^17 meters or 0.27 light years.

1. As the red giant's outer layers expand, they are blown away by strong stellar winds and radiation pressure, creating a shell of gas and dust that is illuminated by the central star's intense ultraviolet radiation. Planetary nebulae are named so because they have a round, planet-like appearance in early telescopes.

2. To calculate the diameter of the Helix Nebula, we can use the small angle formula:

angular diameter = diameter / distance

Rearranging the formula, we get:

diameter = angular diameter × distance

Substituting the given values, we get:

diameter = 16 arcmin × (1/60) degrees/arcmin × (π/180) radians/degree × 200 pc × (3.086 × 10^16 m/pc)

Simplifying, we get:

diameter ≈ 2.5 × 10^17 meters or 0.27 light years

Therefore, the diameter of the Helix Nebula is approximately 2.5 × 10^17 meters or 0.27 light years.

For more such questions on nebula

https://brainly.com/question/15431665

#SPJ11

A planetary nebula is a type of emission nebula that forms when a low or intermediate-mass star, like our Sun, reaches the end of its life and runs out of fuel to continue nuclear fusion reactions in its core. As the star dies, it expels its outer layers into space, creating a glowing shell of ionized gas and dust that is illuminated by the ultraviolet radiation from the central white dwarf. Despite their name, planetary nebulae have nothing to do with planets; they were named by early astronomers who observed them through small telescopes and thought they looked like the disc of a planet.

The angular diameter of the Helix Nebula is given as 16 arcminutes or 0.27 degrees. To calculate the physical diameter of the nebula, we need to know its distance from Earth. The question states that it is approximately 200 parsecs (pc) away.

Using the small angle formula, we can relate the angular diameter of an object (in radians) to its physical diameter (in units of distance) and its distance from the observer (also in units of distance):

Angular diameter = Physical diameter / Distance

We need to convert the angular diameter from degrees to radians:

Angular diameter in radians = (0.27 degrees / 360 degrees) x 2π radians = 0.0047 radians

Now we can rearrange the formula and solve for the physical diameter:

Physical diameter = Angular diameter x Distance

Physical diameter = 0.0047 radians x (200 pc x 3.26 light-years/pc) x (1.0 x 10^13 km/light year) = 1.8 x 10^14 km

Therefore, the diameter of the Helix Nebula is approximately 1.8 x 10^14 kilometres or about 1.2 light years.

Learn more about helix nebula, here:

brainly.com/question/18582489

#SPJ11

if you flew a spaceship straight into jupiter, aiming toward jupiter's center, the spaceship would ________.

Answers

If you flew a spaceship straight into Jupiter, aiming toward its center, the spaceship would experience increasing atmospheric pressure, temperature, and density as it descends. Initially, the spacecraft would encounter the outer layers of Jupiter's atmosphere, which is primarily composed of hydrogen and helium. As it progresses further, it would experience more intense pressure, leading to the hydrogen gas transitioning into a liquid state.

Eventually, the spacecraft would reach a layer where metallic hydrogen is present, which is due to the extremely high pressure and temperature conditions deep within Jupiter's interior. The intense conditions in this region would likely cause the spacecraft to be crushed and destroyed by the immense pressure and heat.

Throughout the descent, the spacecraft would also encounter strong winds and powerful storms, such as the Great Red Spot, which could further challenge its integrity and ability to withstand Jupiter's harsh environment. Overall, the spaceship's journey into Jupiter would be a perilous one, and it would ultimately be destroyed by the planet's extreme conditions.

To know more about spaceship click this link-

https://brainly.com/question/14198872

#SPJ11

Steel train rails are laid in 12.0-m-long segments placed end to end. The rails are laid on a winter day when their temperature is −2.0°C. (a) How much space must be left between adjacent rails if they are just to touch on a summer day when their temperature is 33.0°C? (b) If the rails are originally laid in contact, what is the stress in them on a summer day when their temperature is 33.0°C?

Answers

a) approximately 23.995 m of space should be left between adjacent rails for them to touch on a summer day.

b) The stress in the rails on a summer day when their temperature is 33.0°C is approximately 8.8 MPa.

(a) To calculate the space needed between adjacent rails for them to touch on a summer day, we can use the coefficient of thermal expansion for steel, which is approximately 1.2 × 10⁻5 /°C

First, we need to calculate the change in length of each rail segment from -2.0°C to 33.0°C:

ΔL = αLΔT

ΔL = (1.2 × 10⁻⁵ /°C) × (12.0 m) × (33.0°C - (-2.0°C))

ΔL = 0.00528 m

So, each rail segment will expand by 0.00528 m on the summer day. To determine the space needed between adjacent rails, we subtract the expanded length of one rail from the original length of two rails:

Space needed = (2 × 12.0 m) - 0.00528 m

Space needed = 23.99472 m

Therefore, approximately 23.995 m of space should be left between adjacent rails for them to touch on a summer day.

(b) If the rails are originally laid in contact, they will expand by a total of 0.01056 m on the summer day. The stress in the rails can be calculated using the formula:

Stress = Young's modulus × (change in length / original length)

Assuming a Young's modulus of 200 GPa for steel, we get:

Stress = (200 × 10^9 Pa) × (0.01056 m / (12.0 m × 2))

Stress = 8.8 × 10^6 Pa

Therefore, the stress in the rails on a summer day when their temperature is 33.0°C is approximately 8.8 MPa.

To learn more about Young's modulus  here

https://brainly.com/question/13257353

#SPJ4

a star is moving away from earth at a speed of 2.400 × 108 m/s. light of wavelength 455.0 nm is emitted by the star. what is the wavelength as measured by an earth observer?

Answers

The observed wavelength is longer than the emitted wavelength due to the Doppler effect. The new wavelength is calculated using the formula: λ' = λ (1 + v/c), where λ is the emitted wavelength, v is the relative velocity of the source and observer, and c is the speed of light. Plugging in the values, the new wavelength is 469.3 nm.

When a source of light is moving relative to an observer, the wavelength of the light observed by the observer is shifted due to the Doppler effect. If the source is moving away from the observer, the observed wavelength is longer than the emitted wavelength. The amount of shift depends on the relative velocity of the source and observer. In this case, the relative velocity is 2.400 × 10^8 m/s. Using the formula for the Doppler effect, we can calculate the new wavelength as λ' = λ (1 + v/c), where λ is the emitted wavelength (455.0 nm), v is the relative velocity, and c is the speed of light. Plugging in the values, we get λ' = 469.3 nm, which is the new wavelength as measured by an earth observer.

Learn more about measured here:

https://brainly.com/question/4725561

#SPJ11

Calculate the minimal energy of photons which can be absorbed at the edges of the visible radiation range in ev.

Answers

The minimal energy of photons that can be absorbed at the edges of the visible radiation range is approximately 3.11 eV for violet light and 1.77 eV for red light.

The edges of the visible radiation range are typically defined by the wavelengths of approximately 400 nm (violet) and 700 nm (red). To calculate the minimal energy of photons that can be absorbed at these edges, we can use the energy-wavelength relationship for photons:

[tex]\[ E = \frac{hc}{\lambda} \][/tex]

where \( E \) is the energy of the photon, \( h \) is the Planck's constant[tex](\( 6.626 \times 10^{-34} \, \text{J s} \))[/tex] , \( c \) is the speed of light [tex](\( 3.00 \times 10^{8} \, \text{m/s} \)[/tex]), and [tex]\( \lambda \)[/tex]is the wavelength of the photon.

First, we convert the wavelength values to meters:

[tex]\( \lambda_{\text{violet}} = 400 \, \text{nm} = 400 \times 10^{-9} \, \text{m} \)\( \lambda_{\text{red}} = 700 \, \text{nm} = 700 \times 10^{-9} \, \text{m} \)[/tex]

Now, we can calculate the minimal energies:

[tex]\( E_{\text{violet}} = \frac{hc}{\lambda_{\text{violet}}} \)\( E_{\text{red}} = \frac{hc}{\lambda_{\text{red}}} \)[/tex]

Substituting the values:

[tex]\( E_{\text{violet}} = \frac{6.626 \times 10^{-34} \, \text{J s} \times 3.00 \times 10^{8} \, \text{m/s}}{400 \times 10^{-9} \, \text{m}} \)[/tex]

[tex]\( E_{\text{red}} = \frac{6.626 \times 10^{-34} \, \text{J s} \times 3.00 \times 10^{8} \, \text{m/s}}{700 \times 10^{-9} \, \text{m}} \)[/tex]

Calculating these values:

[tex]\( E_{\text{violet}} \approx 4.97 \times 10^{-19} \, \text{J} \)[/tex]

[tex]\( E_{\text{red}} \approx 2.83 \times 10^{-19} \, \text{J} \)[/tex]

Finally, to convert the energies to electron volts (eV), we use the conversion factor:

[tex]\( 1 \, \text{eV} = 1.602 \times 10^{-19} \, \text{J} \)[/tex]

Converting the energies:

[tex]\( E_{\text{violet}} \approx \frac{4.97 \times 10^{-19} \, \text{J}}{1.602 \times 10^{-19} \, \text{J/eV}} \approx 3.11 \, \text{eV} \)[/tex]

[tex]\( E_{\text{red}} \approx \frac{2.83 \times 10^{-19} \, \text{J}}{1.602 \times 10^{-19} \, \text{J/eV}} \approx 1.77 \, \text{eV} \)[/tex]

Learn more about photons here:

https://brainly.com/question/29415147

#SPJ11

Consider an electron in the N shell.
1-What is the largest orbital angular momentum this electron could have in any chosen direction? Express your answers in terms of ℏ.
Lz,max = _________ ℏ

Answers

For an electron in the N shell, the maximum value of the orbital angular momentum (L) in any chosen direction (z) is given by the formula: Lz, max = ℏ where ℓ is the maximum value of the azimuthal quantum number for the N shell, which is n-1.

1. The principal quantum number (n) determines the energy level and corresponds to the shell number. In this case, n = N.
2. The azimuthal quantum number (l) determines the shape of the orbital and ranges from 0 to n - 1. For the maximum orbital angular momentum, we should choose the largest value of l, which is l = N - 1.
3. The magnetic quantum number (m_l) determines the orientation of the orbital in space and ranges from -l to +l.
The largest orbital angular momentum (Lz, max) occurs when m_l = l, which is equal to N - 1. Therefore, Lz, max = (N - 1) ℏ.

You can learn more about electrons at: https://brainly.com/question/12001116

#SPJ11

Helium gas with a volume of 2.90 L , under a pressure of 0.160 atm and at a temperature of 45.0 ∘C, is warmed until both pressure and volume are doubled.
What is the final temperature?
How many grams of helium are there? The molar mass of helium is 4.00 g/mol.

Answers

Answer:

Explanation:

The final temperature after doubling both the pressure and volume of helium gas, initially at a volume of 2.90 L, a pressure of 0.160 atm, and a temperature of 45.0 °C, is 1272.6K and 0.071 grams of helium are present.

We know that using the combined gas law equation:

[tex]\frac{(P1 * V1)}{T1} = \frac{(P2 * V2)}{T2}[/tex]

Substituting the given values:

[tex]\frac{(0.160 atm * 2.90 L)}{318.15 K} = \frac{(2 * 0.160 atm *2* 2.90 L)}{T2}[/tex]

[tex]T2 = 318.15*4 K[/tex]

[tex]T2 = 1272.6 K\\[/tex]

Therefore the final temperature is 1272.6K.

To calculate the number of moles of helium we can use the ideal gas law equation:

PV = nRT

Substituting the given values:

(0.320 atm) * (5.80 L) = n * (0.08206 L atm / K mol) * (1272.6) K

n = 0.0177 moles

Finally, we can use the relationship between moles, mass, and molar mass:

mass = moles * molar mass

mass = 0.0177* 4 grams

mass = 0.071 grams

Therefore, there are approximately 0.071 grams of helium in the given sample.

To learn more about combined gas law,

https://brainly.com/question/13154969

the brass bar and the aluminum bar in the drawing are each attached to an immovable wall. at 24.3 °c the air gap between the rods is 1.67 x 10-3 m. at what temperature will the gap be closed?

Answers

Since aluminum has a higher coefficient of thermal expansion, it will reach its expansion limit first. Therefore, the gap will close at -72.27°C.

To solve this problem, we need to use the coefficient of thermal expansion for each material. Brass has a coefficient of 18.7 x 10^-6 m/m°C, while aluminum has a coefficient of 23.1 x 10^-6 m/m°C.
Assuming that both bars are initially at the same temperature, the gap between them will increase or decrease depending on which bar expands or contracts more. Since aluminum has a higher coefficient of thermal expansion, it will expand more than brass as the temperature increases.
To find the temperature at which the gap is closed, we can use the formula ΔL = αLΔT,
where ΔL is the change in length, α is the coefficient of thermal expansion, L is the original length, and ΔT is the change in temperature.

We know that the gap between the bars is 1.67 x 10^-3 m at 24.3 °C. Let's assume that the gap is closed when the bars touch each other. In other words, ΔL = -1.67 x 10^-3 m.

Let's also assume that the bars are each 1 meter long.
For aluminum:
-ΔL = αLΔT
-1.67 x 10^-3 m = (23.1 x 10^-6 m/m°C)(1 m)ΔT
ΔT = -72.27°C

For brass:
ΔL = αLΔT
1.67 x 10^-3 m = (18.7 x 10^-6 m/m°C)(1 m)ΔT
ΔT = 89.12°C

It's important to note that this calculation assumes that the bars are free to expand and contract. However, since they are attached to an immovable wall, there may be additional stresses and strains that could affect the outcome.

To know more about thermal expansion visit:

https://brainly.com/question/30242448

#SPJ11

yusef pushes a chair across the room, using 9 w of power to do 45 j of work. how much time does it take him to push the chair?

Answers

Explanation:

Power = work / time

  9      =  45/ t

t = 45/9 = 5 seconds

Two charged bodies exert a force of 0.145 N on each other. If they are moved so that they are one-fourth as far apart, what force is exerted?

Answers

when the two charged bodies are moved to be one-fourth as far apart, the force exerted between them increases to 2.32 N.

When two charged bodies are moved so that they are one-fourth as far apart, the force exerted between them can be found using the inverse square law for electrostatic force. The formula for this law is:

F_new = F_old * (d_old / d_new)^2

Given that the initial force, F_old, is 0.145 N and the distance is reduced to one-fourth (d_new = 1/4 * d_old), we can plug these values into the formula:

F_new = 0.145 * (1 / (1/4))^2

F_new = 0.145 * (4)^2

F_new = 0.145 * 16

F_new = 2.32 N

Therefore, the force between the two charged bodies increases to 2.32 N when they are shifted to be one-fourth as apart. This outcome emphasizes how Coulomb's law, which states that the force between two charged things is inversely proportional to the square of their distance, is an example of an inverse square law. The force exerted by the charged bodies on one another grows quickly as the distance between them shrinks.

To know more about Coulomb's law, click here;

https://brainly.com/question/506926

#SPJ11


in the ground state of hydrogen, the uncertainty in the position of the electron is roughly 0.10 nm. if the speed of the electron is approximately the same as the uncertainty in its speed, about how fast is it moving? m/s

Answers

The electron is moving at approximately 5.27 × 10^(-25) m/s (or 0.527 × 10^(-24) m/s) based on the given uncertainty in its speed.

The uncertainty principle states that there is a fundamental limit to how precisely we can know both the position and momentum of a particle. In the case of the ground state of hydrogen, if the uncertainty in the position of the electron is approximately 0.10 nm, we can use this information to estimate the uncertainty in its speed.

The uncertainty in the position (∆x) and the uncertainty in the momentum (∆p) are related by the following inequality: ∆x * ∆p ≥ h/4π, where h is the Planck constant.

Assuming the uncertainty in the position (∆x) is 0.10 nm (which is equivalent to 0.10 × 10^(-9) meters), we can rearrange the uncertainty principle equation to solve for the uncertainty in momentum (∆p). The equation becomes: ∆p ≥ h / (4π * ∆x).

Plugging in the values, we have: ∆p ≥ (6.626 × 10^(-34) J·s) / (4π * 0.10 × 10^(-9) m).

The uncertainty in momentum (∆p) is approximately equal to the uncertainty in the speed of the electron. So, we can use ∆p as an estimate of the electron's speed.

Calculating this, we get: ∆p ≥ 5.27 × 10^(-25) kg·m/s.

Learn more about electron  here:-

https://brainly.com/question/12001116

#SPJ11

A heat engine absorbs 350 J of heat from a 365 °C high temperature source and expels 225 J of heat to a 20.0 °C low temperature source per cycle. What is the efficiency of the engine? 94.5 % 54.1% 35.7 % 64.3 %

Answers

The efficiency of the engine is 35.7%.

Calculate the efficiency of a heat engine, we'll use the following formula:

Efficiency = (Work done by the engine / Heat absorbed) × 100

First, we need to find the work done by the engine. Work done can be calculated using the following equation:

Work done = Heat absorbed - Heat expelled

Now, let's plug in the values given in the question:

Work done = 350 J (absorbed) - 225 J (expelled) = 125 J

Next, we'll calculate the efficiency using the formula mentioned earlier:

Efficiency = (125 J / 350 J) × 100 = 35.7 %

So, 35.7% is the efficiency of the engine.

For more questions on efficiency:

https://brainly.com/question/30276416

#SPJ11

The efficiency of the engine is 35.7%.

Calculate the efficiency of a heat engine, we'll use the following formula:

Efficiency = (Work done by the engine / Heat absorbed) × 100

First, we need to find the work done by the engine. Work done can be calculated using the following equation:

Work done = Heat absorbed - Heat expelled

Now, let's plug in the values given in the question:

Work done = 350 J (absorbed) - 225 J (expelled) = 125 J

Next, we'll calculate the efficiency using the formula mentioned earlier:

Efficiency = (125 J / 350 J) × 100 = 35.7 %

So, 35.7% is the efficiency of the engine.

Visit to know more about Efficiency:-

brainly.com/question/30276416

#SPJ11

the work done by the normal force on the mass (during the initial fall) is:

Answers

The work done by the normal force on the mass during the initial fall is : zero.

The normal force acts perpendicular to the displacement of the mass. In this case, during the initial fall, the displacement of the mass is vertical downward, while the normal force acts perpendicular to the surface supporting the mass. Since the normal force and displacement are perpendicular to each other, the work done by the normal force is zero.

Work is defined as the dot product of the force and the displacement, given by the equation:

[tex]\text{Work} = \text{force} \times \text{displacement} \times \cos(\text{angle})[/tex]

In this case, the angle between the normal force and the displacement is 90 degrees, and the cosine of 90 degrees is zero. Therefore, the work done by the normal force is zero.

To know more about the work done refer here :

https://brainly.com/question/29989410#

#SPJ11

An incompressible liquid is flowing with a


velocity of 1. 4 m/s through a tube that sud-


denly narrows (there is no change in height)


and increases its velocity to 3. 2 m/s. What


is the difference in pressure between the wide


and narrow ends of the tube?


Assume that the density of the liquid is


1065 kg/m3


Answer in units of Pa.

Answers

The difference in pressure between the wide and narrow ends of the tube is 2102.96 Pa.

The difference in pressure between the wide and narrow ends of the tube if an incompressible liquid is flowing through a tube that suddenly narrows and increases its velocity is calculated as follows. We have to apply Bernoulli's equation to find the difference in pressure.Bernoulli's equation:P1 + 0.5 ρ v1^2 = P2 + 0.5 ρ v2^2P1 and P2 represent the pressure at points 1 and 2, respectively. ρ is the liquid's density, while v1 and v2 are the liquid's velocity at points 1 and 2, respectively.

The pressure difference is:P1 - P2 = (1/2) ρ (v2^2 - v1^2)P1 is the pressure at the wide end of the tube, which is equivalent to the ambient pressure, which we'll take as 1 atm. The velocity at the wide end of the tube, v1, is 1.4 m/s. The velocity at the narrow end of the tube, v2, is 3.2 m/s. Density, ρ, is equal to 1065 kg/m³, as mentioned in the question.

P1 - P2 = (1/2) ρ (v2^2 - v1^2)P1 - P2 = (1/2) (1065 kg/m³) (3.2 m/s)^2 - (1.4 m/s)^2P1 - P2 = 3028.62 Pa - 925.66 PaP1 - P2 = 2102.96 Pa.

Therefore, the difference in pressure between the wide and narrow ends of the tube is 2102.96 Pa.An incompressible liquid is a fluid that does not compress significantly and is therefore not affected by pressure changes.

learn more about velocity Refer: https://brainly.com/question/30559316

#SPJ11

Which system (A−D) has the extrasolar planet that is easiest to detect from Earth?

Answers

The system with the extrasolar planet that is easiest to detect from Earth would likely be System A, as it has the largest planet with the shortest orbital period.

This would result in the planet passing in front of its host star more frequently, causing noticeable dips in the star's brightness that can be detected by telescopes on Earth. For example, a large planet close to its star will be easier to detect through the radial velocity method, which measures the wobble of the star caused by the gravitational pull of the planet. On the other hand, a smaller planet farther from its star may be easier to detect through the transit method, which measures the slight dip in the star's brightness as the planet passes in front of it.

Additionally, the planet's large size would make it easier to detect using methods such as radial velocity measurements. The detectability of an exoplanet depends on several factors, including its size, mass, orbital distance, and the method used for detection.

To know more about planet refer here :

https://brainly.com/question/30395625

#SPJ11

What is proof that at least some IR waves penetrate Earth's atmosphere and reach the surface? o We do not have mutant powers. O Cell phones have a signal even on cloudy days. O People get a sunburn on their skin. We can see the stars at night. O We feel the warmth of the Sun.

Answers

The proof that some IR waves penetrate Earth's atmosphere and reach the surface is that we feel the warmth of the Sun .

]There are multiple pieces of evidence that suggest that at least some IR waves penetrate Earth's atmosphere and reach the surface. First, cell phones are able to receive signals even on cloudy days, which indicates that some form of electromagnetic radiation is able to pass through the atmosphere.

Additionally, people are able to get sunburns on their skin, which is caused by exposure to UV radiation from the Sun. This further supports the idea that some wavelengths of radiation are able to penetrate the atmosphere. Another piece of evidence is that we are able to see stars at night, which indicates that some light is able to travel through the atmosphere and reach our eyes.

Finally, we are able to feel the warmth of the Sun, which is caused by infrared radiation reaching the surface of the Earth. All of these observations suggest that at least some types of electromagnetic radiation are able to penetrate Earth's atmosphere and reach the surface.

To know more about Wave refer here :

https://brainly.com/question/13874687

#SPJ11

how is galileo's revolutionary theory related to feyerabend's overall rejection of the scientific method?

Answers

Galileo's revolutionary theory, which stated that the Earth and other planets revolve around the sun, challenged the long-held belief of the geocentric model of the universe and was met with resistance from the Catholic Church.

Here are some additional bullet points that could further explain their relationship:

Feyerabend believed that Galileo's success in promoting his heliocentric theory despite the prevailing scientific and religious beliefs of his time demonstrated that scientists do not always follow a strict scientific method to arrive at scientific truths.Feyerabend also argued that the history of science shows that scientific progress often comes from individuals who go against the established scientific norms, like Galileo.Feyerabend's rejection of the scientific method in favor of a more pluralistic approach to scientific inquiry is sometimes referred to as "epistemological anarchism."

Feyerabend, a philosopher of science, rejected the idea that there is a single scientific method or process that can be universally applied to all scientific inquiry.

Learn More About scientific method

https://brainly.com/question/17216882

#SPJ11

A certain molecule can be treated as having only a double degenerate state using at 360 cm' above the non-degenerate ground state. The approximate temp. (k) at which 15% of the molecules will be in the upper state is: (a) 500 (b) 150 (C)200 (d) 300

Answers

The approximate temp. (k) at which 15% of the molecules will be in the upper state is 200 (Option C).

To find the approximate temperature at which 15% of the molecules will be in the upper state, we can use the Boltzmann distribution formula:

n_upper/n_total = exp(-ΔE / kT)

Where n_upper is the number of molecules in the upper state, n_total is the total number of molecules, ΔE is the energy difference between the states (360 cm⁻¹), k is the Boltzmann constant (0.695 cm⁻¹ K⁻¹), and T is the temperature in Kelvin.

Since we're looking for the temperature at which 15% of the molecules will be in the upper state, n_upper/n_total = 0.15. Plugging this into the formula, we get:

0.15 = exp(-360 / (0.695 × T))

Solving for T, we get an approximate temperature of:

T ≈ 200 K

Therefore, the correct answer is (C) 200.

You can learn more about molecules at: brainly.com/question/30465503

#SPJ11

The speed of light c in a vacuum is 2.997 x 108 m/s. Given that the index of refraction in benzene is 1.501, what is the speed of light Ubenzene in benzene? Ubenzene = m/s Given that the index of refraction in fluorite is 1.434, what is the speed of light Vfluorite in fluorite? Ufluorite m/s

Answers

The speed of light Ubenzene in benzene is 1.997 x 10^8 m/s, and the speed of light Vfluorite in fluorite is 2.073 x 10^8 m/s.

The speed of light in a medium is related to its index of refraction (n) by the formula: c/n = v, where c is the speed of light in a vacuum and v is the speed of light in the medium.

For benzene, given that the index of refraction is 1.501, we can calculate the speed of light Ubenzene as follows:

Ubenzene = c/nbenzene = (2.997 x 10^8 m/s)/1.501 = 1.997 x 10^8 m/s

Similarly, for fluorite, given that the index of refraction is 1.434, we can calculate the speed of light Vfluorite as follows:

Vfluorite = c/nfluorite = (2.997 x 10^8 m/s)/1.434 = 2.073 x 10^8 m/s

Therefore, the speed of light in benzene is slower than the speed of light in a vacuum, whereas the speed of light in fluorite is faster than the speed of light in a vacuum.

For more questions like Light click the link below:

https://brainly.com/question/10709323

#SPJ11

a laser with l = 532 nm is passed through a diffraction grating. the first-order maximum is observed at q = 25°. what is the spacing, d, between the slits? how many slits are there per mm?

Answers

Number of slits per mm = 1 / 0.001279 mm ≈ 782 slits/mm, the spacing, d, between the slits we can use the equation for the diffraction grating:
d sinθ = mλ

We are given λ = 532 nm and θ = 25° for the first-order maximum. Therefore, we can solve for d: d = mλ/sinθ
For the first-order maximum, m = 1. Plugging in the values, we get:
d = (1)(532 nm)/sin(25°) ≈ 1223 nm
So the spacing between the slits is approximately 1223 nm.
To find the number of slits per mm, we can use the formula: n = 1/d
Where n is the number of slits per unit length.

We want the answer in units of mm, so we convert nm to mm:                        1 nm = 10^-6 mm
where n is the order of the maximum (n = 1 for the first-order maximum), λ is the wavelength of the laser (λ = 532 nm), and θ is the angle (θ = 25°). Rearranging the formula to solve for d, we get: d = (n * λ) / sin(θ)
Substitute the values:
d = (1 * 532 nm) / sin(25°)
d ≈ 1279 nm
Now, to find the number of slits per mm, we simply need to convert the spacing to mm and take its reciprocal:
d = 1279 nm = 0.001279 mm

To know more about diffraction visit:-

https://brainly.com/question/12290582

#SPJ11

x-ray telescope mirrors are very similar to optical telescope mirrors.true or false?

Answers

deloer je n'ai pas mla reponse a tas question

Therefore, the statement that "X-ray telescope mirrors are very similar to optical telescope mirrors" is FALSE since they are used for capturing and detecting different wavelengths of light. Optical telescopes detect and focus visible light while X-ray telescopes capture and detect high-energy X-ray radiation.

X-ray telescope mirrors are not very similar to optical telescope mirrors. The two are different because they have different types of wavelengths of light they detect. While optical telescopes reflect and focus visible light to produce images, X-ray telescopes capture and detect high-energy X-ray radiation that is outside the visible spectrum.

What are X-ray telescopes?

X-ray telescopes are scientific instruments that are designed to observe objects in space that emit X-ray radiation. The mirrors of X-ray telescopes are made of a special type of glass or metal that can reflect and focus X-rays in the same way that optical telescopes focus and reflect light. The main function of X-ray telescopes is to gather high-energy X-rays that are emitted by objects in space such as black holes, neutron stars, and other exotic celestial bodies. They can also be used to study the X-ray properties of galaxies, stars, and other astronomical objects.

to know more about X-ray telescopes visit:

https://brainly.com/question/14683213

#SPJ11

Empty versus critical universe: a. For the above empty universe model, invert the formula for z(d) to derive an expression for distance as a function of redshift z. For this use the notation do(z), where the subscript "0" denotes the null value of 2m. b. If a distance measurement is accurate to 10 percent, at what minimum redshift Zo can one observationally distinguish the redshift versus distance of an empty universe from a strictly linear Hubble law d =cz/H, c. Using the above results from Exercise la, now derive an analogous distance ver- sus redshift formula dı(z) for the critical universe with 12m=1 (and Na=0). d. Again, if a distance measurement is accurate to 10 percent, at what minimum redshift z1 can one observationally distinguish the redshift versus distance of such a critical universe from a strictly linear Hubble law. e. Finally, again with a distance measurement accurate to 10 percent, at what minimum redshift Z10 can one observationally distinguish the redshift versus distance of a critical universe from an empty universe?

Answers

The redshift versus distance of a critical universe from an empty universe can be found by comparing the distance formulas for both cases. It is approximately 0.17.

What is the expression for distance as a function of redshift for a critical universe with 2m=1 and Na=0?In the empty universe model, the expression for distance as a function of redshift (z) can be derived by inverting the formula for z(d). Denoting the null value of 2m as do(z), the expression for distance is given by d = (c/H) ln((1 + z)/(1 + do(z))).

To observationally distinguish the redshift versus distance of an empty universe from a linear Hubble law (d = cz/H) with an accuracy of 10 percent, we need to determine the minimum redshift Zo. By comparing the two distance formulas and considering a 10 percent accuracy, we find that Zo is approximately 0.11.

For the critical universe with 2m = 1 (and Na = 0), a distance versus redshift formula can be derived using the results from Exercise la. The formula is given by dı(z) = (c/H) sin[(H/H0)∫(0 to z) dz/√(Ωm(1+z)^3 + (1-Ωm))], where H0 is the present value of the Hubble parameter.

To observationally distinguish the redshift versus distance of a critical universe from a linear Hubble law with a 10 percent accuracy, we need to determine the minimum redshift z1.

By comparing the distance formulas for the critical universe and the linear Hubble law, we find that z1 is approximately 0.052.

With a 10 percent accuracy in distance measurement, the minimum redshift Z10 at which one can observationally distinguish the redshift versus distance of a critical universe from an empty universe can be found by comparing the distance formulas for both cases. It is approximately 0.17.

Learn more about redshift

brainly.com/question/13494718

#SPJ11

If a particle has a force of 10.0 N applied to it back toward the equilibrium position when it vibrates 0.0331 m, what is the Hooke's Law constant for that particle? 0 3.31N O 30.2N 03.31N O 30.2N

Answers

The force constant is 30.2N/m

What is Hooke's law?

Hooke's law states that provided the elastic limit of an elastic material is not exceeded , the extension of the material is directly proportional to the force applied on the load.

Therefore, from Hooke's law;

F = ke

where F is the force , e is the extension and k is the force constant.

F = 10N

e = 0.331m

K = f/e

K = 10/0.331

K = 30.2N/m

Therefore the force constant is 30.2N/m

learn more about Hooke's law from

https://brainly.com/question/2648431

#SPJ1

Other Questions
Find the two values of k k for which y ( x ) = e k x y(x)=ekx is a solution of the differential equation Wynton explains that artists have a responsibility to be engaged with our way of life". What does he mean by that? How has Wynton Marsalis addressed the social issues stillaffecting our country? Be specific. I True or False: The payback method of evaluating a long term investment does not take into consideration the time value of money. a firm faces the demand curve: p = 1,803 - 18q. what is the firms revenue maximizing price? enter as a value (round to two decimal places if necessary). Lo Shu Magic Square The Lo Shu Magic Square is a grid with 3 rows and 3 columns, shown in F Lo Shu Magic Square has the following properties: The grid contains the numbers 1 through 9 exactly. The sum of each row, each column, and each diagonal all add up to the This is shown in Figure 7-32. dd up to the same numb In a program you can simulate a magic square using a two-dimensional arra method that accepts a two-dimensional array as an argument, and determines wher! array is a Lo Shu Magic Square. Test the function in a program.Figure 7-32 Lo Shu Magic Square4 9 23 5 78 1 6 which application delivery method is considered to be in a two-tier pattern in which the presentation is stored on your computer and the code and data are stored on a server? A thin film of alcohol (n = 1.36) lies on a flat glass plate (n = 1.51). Light whose wavelength can be changed is incident normally on the alcohol. The reflected light is a minimum for =512nmand a maximum for =640nm. What is the minimum thickness of the film? All homeodomain containing proteins are HOX proteins True False do sample problem 13.10 in the 8th ed of silberberg. a 0.943 g sample of magnesium chloride dissolves in 96 g of water in a flask. how many moles of cl ? enter to 4 decimal places. Lena is an industrial equipment mechanic who services large cranes used to offload shipping containers at a port. Lenas job is to make sure that the cranes are operating at their top efficiency. The pathway in the Transportation and Logistics cluster that Lenas job falls into is _____. Facility & Mobile Equipment Maintenance Logistics, Planning and Management Services Transportation and Operations Warehousing & Distribution Center Operations A 40-year-old woman from Alaska presents to her physician with muscle aches and pains and generalized weakness. The following results were obtained (normal ranges in parenthesis):Calcium = 8.2 mg/dL (8.8 - 10.4)Phosphate = 2.2 mg/dL (2.3-4.7)Alkaline phosphatase = 350 U/L (30-120)PTH = 124 pg/mL (10-65)25-hydroxy vitamin D = < 5 ng/mL (15-40)What is most likely the cause of her symptoms? express s from the second equation and use it to substitute s out of the first equation to obtain c1 c2 1 r = w. this equation is called the intertemporal budget constraint A student bikes to school by traveling first dN = 0.900 miles north, then dW = 0.300 miles west, and finally dS = 0.200 miles south. Take the north direction as the positive y-direction and east as positive x. The origin is still where the student starts biking. Let d N be the displacement vector corresponding to the first leg of the student's trip. Express d N in component form. (dN)x, (dN)y= I have already tried -0.3, 0.7 which is incorrect:( How many atoms are in 0.534 mol of nickel, Ni? Select one: a. 1.13 times 10^24 atoms b. 1.48 times 10^25 atoms c. 2.44 times 10^22 atoms d. 3.22 times 10^23 atoms e. 6.98 times 10^21 atoms draw the structure(s) of all of the branched alkene isomers, c6h12, that contain 2 methyl branches. Carbon dating is useful only for determining the age of objects less than about _____ years old. A. 4.5 million. B. 60,000. C. 1.2 million. D. 600,000. during a surgical procedure, a patient suddenly has a major hemorrhage. how will the blood distribution to different organs change after the hemorrage The 2013 financial statements of Walgreen Co. reported the following information (in millions):Walgreen Co.20132012Cost of sales$51,098$51,291Inventories, net6,8527,036LIFO reserve2,1001,897Convert the above FIFO method to LIFO method and calculate the cost of goods sold for 2013 under LIFO. 100 POINTS AND I WILL MARK YOU BRAINLIESTIn 6 senctences write a paragraph about facts about planetsand 6 sentences about outer space I was parched io drank an entiore glass of water in one gulp loud thirsthy easy