Answer:
E. The substitution allows each carbon atom to accept more than four valence electrons.
Explanation:
Halogens (except for fluorine) have seven valence electrons, which gives them the flexibility to participate in more than four covalent bonds. Hydrogen only has one valence electron, so it tends to form only four covalent bonds. In a substitution reaction, each halogen provides the carbon atom with additional electrons, allowing it to accept more than the usual four.
Answer:
C. The bonds between the carbon atoms in the molecule become weaker.
Explanation:
Give an example of direct and indirect evidence geologists use to study the interior of the Earth
Direct evidence for the interior of the Earth comes from measurements and samples that are taken directly from the Earth's interior. This can include things like rock samples from deep mines, or measurements of seismic waves that have traveled through the Earth.
One example of direct evidence is rock samples that have been brought to the surface by volcanic eruptions or other means. These samples can provide geologists with information about the composition and structure of the Earth's interior. For example, by studying the minerals in a rock sample, geologists can infer the temperatures and pressures that existed in the Earth's interior when the rock was formed.
Indirect evidence, on the other hand, is information that has been inferred from measurements or observations that are not taken directly from the Earth's interior. One example of indirect evidence is the study of seismic waves, which are waves of energy that travel through the Earth's interior in response to earthquakes or other disturbances. By measuring the speed at which these seismic waves travel through the Earth, geologists can infer the density and composition of the materials that make up the Earth's interior.
Which one of the following statements is not correct about MSDS?
Select one:
a.
It does not contain information on physical and chemical properties of the material, potential hazards of the material and how to work safely with these materials.
b.
It provides single reference for all information about hazardous chemicals.
c.
Material Safety Data sheet forms the important elements of effective Chemical Hazards Communication System.
d.
It is a document prepared by the manufacturers/suppliers of the chemical
Option B. It provides a single reference for all information about hazardous chemicals.
MSDS does not provide a single reference for all information about hazardous chemicals, but it does provide information on physical and chemical properties, potential hazards, and safe work practices.
Understanding the Role of MSDS in Chemical Hazard CommunicationThe Material Safety Data Sheet (MSDS) is a document prepared by the manufacturer or supplier of a hazardous chemical which provides information about the physical and chemical properties of the hazardous chemical, potential hazards associated with it, and how to work safely with it. The MSDS is an important element of an effective chemical hazard communication system as it provides information on how to identify and protect against potential health hazards, proper storage and handling procedures, and proper disposal methods.
Learn more about MSDS: https://brainly.com/question/18638385
#SPJ4
Steel is an alloy containing Fe atoms and C atoms. Which of the following diagrams best represents the particle-level structure of steel ?
the diagram that best represents the particle-level structure of steel as alloy is option (b).
Alloy, often known as an alloy, is a metallic material made up of two or more elements. Even though carbon, a nonmetal, is a crucial component of steel, the constituents of alloys are typically themselves metals.
Typically, melting the mixture of materials produces alloys. Early civilizations recognized the usefulness of alloys; brass (copper and zinc) and bronze (copper and tin) were particularly significant.
Steel is an alloy of iron and carbon. carbon range is upto 2 percent in the mixture.
In steel iron atoms are larger than carbon.
Learn more about alloy
brainly.com/question/3718729
#SPJ4
LPG consists of mainly
A. methane, ethane and hexane
B. ethane, hexane and nonane
C. methane, hexane and nonane
D. methane, butane and propane
D. methane, butane and propane
Propane and butane are both types of alkane hydrocarbons with relatively low boiling points, which allows them to be easily converted to a liquid form at relatively low pressures. This makes them easy to transport and store. Methane, ethane, and hexane are also alkane hydrocarbons, but they are not typically found in large amounts in LPG.
Learn more about "LPG " : https://brainly.com/question/29543454
The measured electric mobilities of K+ (aq) and Cl– (aq) at a KCl concentration of 0.30 mol L–1 are respectively, 5.9 10 –4 and 6.14 10–4 cm2 V–1 s–1 at 30 OC. Calculate the transport numbers and molar ionic conductivity of K+ and Cl–. What is the molar conductivity of KCl at this concentration? Assume complete ionisation of KCl.
The molar conductivity of KCl at this concentration and transport numbers and molar ionic conductivity of K+ and Cl– are
Λm =1.806×10−4 t(K+)=4.90033223×10^−9 t(Cl-) =5.09966777×10^−9What is the molar conductivity of KCl at this concentration?Generally, The transport number, t, of an ion can be calculated using the equation: t = (μi x Ci) / Λm,
where
tμi is the electric mobility of the ion, Ci is the concentration of the ion, and Λm ishe molar conductivity of the electrolyte solution.Given that the electric mobility of
K+ is 5.9 x 10^-4 cm^2 V^-1 s^-1, the electric mobility of Cl- is 6.14 x 10^-4 cm^2 V^-1 s^-1, and the concentration of KCl is 0.30 mol L^-1, we can calculate the transport numbers as:
t(K+) = (5.9 x 10^-4 cm^2 V^-1 s^-1 x [K+]) / Λm t(Cl-)
= (6.14 x 10^-4 cm^2 V^-1 s^-1 x [Cl-]) / Λm
where
[K+] and [Cl-] are the molar concentrations of K+ and Cl- ions, respectively.
The molar ionic conductivity, Λi, of an ion can be calculated using the equation: Λi = μi x Ci,
where
μi is the electric mobility of the ion and Ci is the concentration of the ion.Given that the electric mobility of K+ is 5.9 x 10^-4 cm^2 V^-1 s^-1 and the concentration of K+ is 0.15 mol L^-1, the molar ionic conductivity of K+ is:
Λ(K+) = 5.9 x 10^-4 cm^2 V^-1 s^-1 x 0.15 mol L^-1
Λ(K+) =8.85×10−5
Similarly, given that the electric mobility of
Cl- is 6.14 x 10^-4 cm^2 V^-1 s^-1 and the concentration of Cl- is 0.15 mol L^-1, the molar ionic conductivity of Cl- is:
Λ(Cl-) = 6.14 x 10^-4 cm^2 V^-1 s^-1 x 0.15 mol L^-1
Λ(Cl-) =9.21×10^−5
Finally, the molar conductivity of KCl can be calculated as:
Λm = Λ(K+) + Λ(Cl-)
=9.21×10^−5+8.85×10^−5
Λm =1.806×10−4
The transport numbers of K+ and Cl- can be calculated by
t(K+) = Λ(K+) / Λm and
t(Cl-) = Λ(Cl-) / Λm respectively.
t(K+) = 8.85×10−5/1.806×10−4 '
t(K+)=4.90033223×10^−9
and
t(Cl-) =9.21×10^−5/1.806×10−4
t(Cl-) =5.09966777×10^−9
Read more about molar conductivity
https://brainly.com/question/26097545
#SPJ1
Use information from the reaction to design an experiment that could be used to remove the tarnish (Ag2S) from a silver fork
Line a basin with foil, add a teaspoon of bicarbonate of soda and a sprinkle of salt, and then pour in hot water. The tarnished silver object may then be immersed in water, ensuring sure it comes into touch with the aluminum foil, as well as the silver sulphide tarnish will quickly dissipate.
Tarnish is caused by a chemical interaction between silver and sulfur-containing compounds in the air. Silver sulphide is formed when silver combines with sulphur. Silver sulphide is a dark substance. A thin layer of silver sulphide grows on the surface of silver, darkening it.
Experimental design is a technique that enables scientists and engineers to efficiently assess the effect of multiple inputs, or factors, on measures of performance, or responses. A bone density research, for example, contains three experimental groups: a control group, the stretching exercise group, as well as a jumping exercise group. In a between-subjects experiment, investigators allocate each participant to one of three groups at random. While silver is the most commonly linked with tarnishing, it may occur on almost every metal, including aluminum, copper, and brass.
To know more about the Experiment Design, here
https://brainly.com/question/1418338
#SPJ4
Benzene (C6H6) burns in air to produce carbon dioxide and liquid water. How much heat is released per mole of benzene combusted? The standard enthalpy of formation of benzene is 49.04 kJ/mol
Benzene (C6H6) burns in air to produce carbon dioxide and liquid water.The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.
What is heat ?
Heat is the result of the movement of kinetic energy within a material or an item, or from an energy source to a material or an object. Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.
The movement of minuscule atoms, molecules, or ions in solids, liquids, and gases produces heat energy. From one thing to another, heat energy can be exchanged. Heat is the flow or transfer that occurs as a result of the temperature differential between two objects.
Reaction as follows;
2C6H6 + 15O2 → 12CO2 + 6H2O
2x49.04 2x10 12x-393.5 6x-285.8
= [ 12(-393.5 )+6(-285.8) ] - [ 2(49.04)+(2x10) ]
= - 6936.8 - 98
= - 6534.8 KJ/mole
Per gram of benzene
= ( -6534.8 KJ / 2 mole of C6H6) (1 mole of C6H6 / 78.108g )
= -41.83 KJ / mole
Thus, The heat released in KJ per gram of the compound reacted with oxygen is -41.83 KJ.
To learn more about heat, follow the link;
https://brainly.com/question/1429452
#SPJ1
When 10g of hydrogen gas react with chlorine gas, how many liters hydrogen monochloride (HCl) will be produced at STP
The amount of hydrogen monochloride that is produced at STP is 152 mL.
The balanced chemical reaction can be depicted as follows:
H₂ + Cl₂ -----> 2 HCl
According to stoichiometry, When one mole of hydrogen reacts with one mole of chlorine, it yields two moles of hydrogen monochloride. Stoichiometry defines the relationship between the quantities of reactants and products before, during, and following chemical reactions
If, 2 g of Hydrogen reacts with 71 g of chlorine to form 73 g of Hydrogen Chloride.
Therefore, if 10 g reacts with 142 g of chlorine, the HCl produced will be 152 g or 152 ml of HCl.
To learn more about stoichiometry check the link below:
https://brainly.com/question/14935523
#SPJ4
which type of radioactive decay has the net effect of changing a neutron into a proton?
Answer: Beta Decay is the kind of radioactive decay that has the net effect of changing a neutron into a proton.
Explanation:
The opposite path, in which a neutron becomes a proton, is also possible. Exactly what happens is that a weak force changes the flavor of the card from top to bottom and vice versa. When this happens, the quark emits a W boson, which quickly decays into either an electron/antineutrino pair or a positron/neutrino pair, depending on the direction of change (neutron decays to protons, electron/antineutrino pairs are created).
Learn more about Beta Decay:
https://brainly.in/question/3235096
The poles of an electromagnet can even be reversed by reversing the flow of electricity true or false
By reversing the flow of electricity, the poles of an electromagnet may be reversed. As a result, the following statement is true.
An electromagnet is a magnet that uses electricity to operate. In contrast to a permanent magnet, the strength of an electromagnet may be readily altered by varying the amount of electric current flowing through it. By reversing the flow of electricity, the poles of an electromagnet can even be reversed.
Know more about electromagnet here:
https://brainly.com/question/12555869
Calculate the number of molecules in 9.03 liters of carbon dioxide gas at standard temperature and pressure.
9.03 liters of carbon dioxide gas would contain 0.40 moles of carbon dioxide molecules. Since 1 mole of any gas contains 6.02 x 10^23 molecules, the number of molecules of carbon dioxide gas in 9.03 liters of carbon dioxide gas at STP would be 2.41 x 10^23 molecules.
What is molecules?Molecules are the smallest units of matter that can exist by themselves. They are composed of two or more atoms that are held together by chemical bonds. Molecules can be found in the air we breathe, the water we drink, and the food we eat. They can also be found in living organisms, like plants and animals. Molecules can be made of a variety of different atoms, such as oxygen, carbon, nitrogen, and hydrogen.
To learn more about molecules
https://brainly.com/question/26044300
#SPJ1
Name the following alkyne. Be sure to use hyphens (-) not endashes (-).
2,2-Dimethylbut-1-yne .The alkyne name is formed using the IUPAC nomenclature system.
First, the length of the longest continuous carbon chain (containing the triple bond) must be identified. In this case, it is a four-carbon chain (but-).
Second, the location of the triple bond must be determined. In this case, it is located on the first carbon atom so the prefix 1- is used.
Third, the substituents must be listed in alphabetical order. In this case, there are two methyl groups (2,2-dimethyl).
The final name is 2,2-Dimethylbut-1-yne.
2,2-Dimethylbut-1-yne .The alkyne name is formed using the IUPAC nomenclature system.
learn more about alkyne here
https://brainly.com/question/23508203
#SPJ4
The IUPAC name for dimethyl ketone is ) 2-propanal. B) 3-propanal. C) 2-propanone. D) 1-propanone. E) acetone
The IUPAC name for dimethyl ketone is (C) 2-propanone
The prefix "di-" indicates two methyl groups (CH3) is attached to the parent compound, which is a ketone. The parent compound is also known as propanone.
It is a clear, colorless liquid that is commonly used as a solvent and in the production of various chemicals and materials. It is also known as acetone. It is used as a solvent, as a starting material in the synthesis of other compounds, and as an intermediate in the production of certain polymers.
Utilized to create compounds such as plastic, fiber, medicines, and other substances. Other compounds can also be dissolved with it. It is a byproduct of the breakdown of human fat and is found naturally in plants, trees, volcanic gases, forest fires, and other organisms.
Learn more about 2-propanone here: https://brainly.com/question/29167289
#SPJ4
Outside city limits, the minimum distance for parking cars from a warning cross indicating a railroad crossing is 50 meters (165 feet).
a. True. B. False
The given statement is false - outside city limits, the minimum distance for parking cars from a warning cross indicating a railroad crossing is 50 meters (165 feet).
Which of the following must you keep a safe distance from when parking at a railroad crossing?Within 100 feet of a railroad crossing, bridge, tunnel, or other potentially dangerous location.
To ensure the safety of drivers on the road, the relevant authorities have made a number of rules regarding parking cars and other vehicles.
The authorities have made regulations regarding car parking close to railroad crossing signs in consideration of public safety and potential conditions relating to traffic accidents.
Because trains follow a different route and are a different mode of transportation, sometimes they must cross over the sides of the road.
The maximum length for parking a car outside the city limits has been set at 50 meters in order to prevent accidents that might happen as a result of track failure or other technical issues.
The same limit for parking a car inside the city's boundaries, however, has been set to at least 10 meters, or roughly 33 feet, due to space restrictions.
To know more about parking rules visit:
https://brainly.com/question/14393301
#SPJ4
The gas in a 250.0 mL piston experiences a change in pressure from 1.00 atm to 4.90 atm. What is the new volume (in mL) assuming the moles of gas and temperature are held constant
The gas in a 250.0 mL piston experiences a change in pressure from 1.00 atm to 4.90 atm. 56.2 ml is the new volume (in mL) assuming the moles of gas and temperature are held constant.
What is Boyle's law ?Boyle's law states that at a given temperature, the volume of a gas and its pressure are inversely proportional.
Robert A. Boyle discovered the law in 1662, which states that at a constant temperature, the volume of a gas is inversely proportional to the pressure exerted by the gas.
Given:
Initial volume (V₁) = 250 mL
Initial pressure (P₁) = 1.00 atm
Final volume (V₂) = ?
Final pressure (P₂) = 4.45 atm
Assuming the gas has an ideal behavior, we can find the final volume by using Boyle's law as follows:
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁/P₂
V₂ = 1.00 atm × 250 mL / 4.45 atm
V₂ = 56.2 ml
Thus, 56.2 ml is the new volume (in mL) assuming the moles of gas and temperature are held constant.
To learn more about the Boyle's law, follow the link;
https://brainly.com/question/30367067
#SPJ1
How many neutrons are there in 14 gram of c14?
48×10²³ neutrons are there in 14 gram of C14
Any material that is totally composed of the same kinds of atoms is said to be an element. For instance, the element carbon is made up entirely of carbon atoms. The number of protons in an atom is indicated by the element's atomic number. The quantity of protons and electrons inside a neutral atom must match.
Neutron in 14 grams of C14 can be calculate as follows:
Mass number (or atomic weight) of ₆C¹⁴ is 14.
we know that Avogadro number =6×10²³
The number of neutrons in 12g of ₆C¹⁴ can be calculate by multiplying the number of neutron to the avogadro number
The total amount of protons and neutrons makes up mass. There will thus be = 14 - 6 = 8 neutrons.
neutron = (A−Z)×6×1023=(14−6)×6×10²³=48×10²³
Learn more about neutron at brainly.com/question/29248303
#SPJ4
The enthalpy of solution of KBr in water is about 198 kJ/mol. Nevertheless, he solubility of KBr in water is relatively high. Why does the solution process occur even though it is endothermic?
The process of dissolution of KBr in water occurs because the final solution has a lower energy state than the two components separately.
What do you mean by endothermic?
Endothermic reactions are chemical reactions that absorb energy from their surroundings in order to proceed. This energy is usually in the form of heat and is absorbed from the surroundings in order to drive the reaction forward.
Even though the dissolution process is endothermic, it occurs because the enthalpy of solution is less than the sum of the enthalpies of the two components separately. The enthalpy of solution is the energy required to break the strong ionic bonds between the KBr molecules, allowing them to dissolve into the solution. The energy released from the formation of new hydrogen bonds between the KBr molecules and the water molecules is greater than the energy needed to break the ionic bonds, resulting in a net release of energy. This release of energy causes the overall process to be exothermic, even though the dissolution of KBr into water is endothermic.
To know more about endothermic,
https://brainly.com/question/6506846
#SPJ4
Students are challenged to design cold packs for treating injuries. To do this they must find a chemical reaction that absorbs heat energy. The ideal chemical reaction will reach a temperature in the range of 0C to 4C and maintain that temperature for a minimum of 20 minutes
Students as a chemical reaction that absorbs thermal energy for the design of cold packs for the treatment of injuries can combine manganese oxide (MnO2) with hydrogen peroxide (H2O2)
By controlling the amounts of the reactants they can control the temperature, keeping it between 0 °C and 4 °C for 20 minutes or more.
This type of chemical reaction is called endothermic, because energy is absorbed in the form of light or heat, causing the resulting products to have higher energy than the reactants.
Chemical reaction that absorbs thermal energy fpr cold compresses for the treatment of injuriesThe most widely used endothermic chemical reaction in the treatment of injuries is the melting of ice, at least in warm environments, which occurs according to the following reaction:
H2O (s) + Energy ----- H2O (l)
Decomposition of manganese oxide absorbs thermal energyThe effect of an endothermic reaction is absorbs heat energy and in the case of manganese oxide the following decomposition occurs:
MnO2 (s) → MnO (s) + ½ O2 (g); ∆HR = 134kJ
Students can design cold packs for treating injuries with manganese dioxide bcause it breaks down into two products, manganese oxide and oxygen, making the enthalpy greater than zero (∆HR > 0).
MnO2 is a solid between gray and black in color and is present in minerals such as pyrolusite and nsutite, when combined with hydrogen peroxide it acts as a catalyst so that it accelerates chemical reaction
Learn more about a chemical reaction that absorbs thermal energy at https://brainly.com/question/15670457
#SPJ4
What happens to molecules when they move faster?
When molecules move faster, they increase their kinetic energy.
What is Kinetic energy?
Kinetic energy is essentially the energy of motion. It is the type of energy that an object possesses as a result of its motion. It is commonly defined as the work required to accelerate a given mass body from rest to its stated velocity. Kinetic energy is directly related to the object's mass and the square of its velocity.
This increase in kinetic energy causes the molecules to vibrate more rapidly, resulting in an increase in temperature. As molecules move faster, they also collide with each other more frequently, leading to more chemical reactions.
To know more about kinetic energy,
https://brainly.com/question/8101588
#SPJ4
Tungsten 188 decays by beta. Find the daughter product.
daughter product (mass.atomic/,element symbol);
By beta, tungsten 188 decays. The mechanism through which an insecure atomic structure is produced is known as radioactive decay.
How does radioactive decay work?The process through which highly unstable molecular nucleus loses its energy through radiation is described as radioactive decay, also characterized as nuclear decay, radiography, radioactivity breakdown, or nuclear disintegration. A substance that has unstable nuclei is regarded as radioactive. For a large variety of human activities, radioactive decay is crucial.
What occurs when radioactive material decays?Alpha, beta, and/or gamma rays are all types of ionizing radiation that are released when radioactive atoms decay. Because the energy is powerful enough to dislodge firmly coupled electrons from just an atom's orbit, it is known as ionizing radiation. As a result, the atom develops into a charged ion.
To know more about radioactive decay visit:
https://brainly.com/question/1770619
#SPJ1
Sulfuryl chloride is in equilibrium with sulfur dioxide and chlorine gas: so2cl2(g) so2(g) + cl2(g) a system with a volume of 1. 00 l is in equilibrium at a certain temperature with p(so2cl2) = 1. 00 bar and p(so2) = p(cl2) = 0. 10 bar. By how much will the number of moles of so2cl2 at equilibrium change if the volume is reduced to 0. 50 l? (a) increase 1-10% (b) increase 11-50% (c) decrease 1-10% (d) decrease 11-50%
The volume is decreased to 0. 50L, the number of moles of SO₂Cl₂at equilibrium will increase by 1–10% option - a is correct.
What is Le Chatelier's Principle.The guiding idea of Le Chatelier is as follows: A shift in the position of the equilibrium results from a change in one of the variables that characterize a system in equilibrium and cancels out the effects of that change.
Now to solve this question first we have to know the Le-chatelier's
Principle
The Principal that if a system in chemical equilibrium is subjected to a disturbance it tends to change in a way that opposes this disturbance.
SO₂Cl₂(g) ⇄ SO₂(g) + Cl₂(g)
Initially, there is one molecule at the left hand side of the reaction and two molecules are on the right. But, the Partial pressure of molecules on RHS is lower than LHS. Concentration of RHS molecules is Lower, forward reaction is more favorable.
Decreasing volume would result in increasing the total pressure.
Now, according to Le chatelier's Principle, the equilibrium will shift in such a way to oppose change under compression. Since there are more moles of Products than reactants, to counteract the increased pressure. The equilibrium will shift to LHS increasing the moles
of SO₂Cl₂ but since the concentration (Partial Pressure)
of SO₂Cl₂, it will not increase more than 10%
Hence, answer will be (a) Increase 1-10%.
To know more about Le Chatelier's principle visit:
https://brainly.com/question/29009512
#SPJ4
A 35.2-mL, 1.66 M KMnO 4 solution is mixed with 16.7 mL of 0.892 M KMnO 4 solution. Calculate the concentration of the fi nal solution.
The concentration of the final solution is 1.41[tex]\frac{mol}{L}[/tex].
Now, first calculate the number of moles of first solution:
[tex]M_{1} =\frac{no. of moles of solution}{total volume of solution}[/tex]
no. of moles we have to find
total volume is 0.0352L and molarity of solution is 1.66M
The total number of moles of solute present in a given solution per litre is known as its molarity. In contrast to mass, which varies as the system's physical circumstances vary, the volume of a solution changes as a function of changes in the system's physical qualities, such as pressure and temperature. This has an impact on the molality of the solution. The symbol M, sometimes known as a molar, denotes molarity.
[tex]1.66=\frac{n}{0.0352}[/tex]
on solving we get,
n=0.0584 mol
Now, find the number of moles of second solution by the same formula used to find the moles of first solution,
molarity of second solution is 0.892M and total volume is 0.0167L
Now, put the values in the formula,
[tex]0.892=\frac{m}{0.0167}[/tex]
On solving we get,
m=0.0149 mol
and to find the concentration of new solution number of moles is equal to the sum of moles of first solution and second solution.
x=m+n
x=0.0584+0.0149
x=0.0733 mol
Now, molar concentration is,
[tex]M=\frac{x}{V}[/tex]
[tex]M=\frac{0.0733}{0.352+0.0167}[/tex]
On solving we get,
M=1.41[tex]\frac{mol}{L}[/tex]
Learn more about molarity
brainly.com/question/8732513
#SPJ4
What are the six physical properties associated with hazard recognition of hazardous materials/chemicals
The six physical properties associated with hazard recognition of hazardous materials/chemicals are Flammability, Reactivity, Toxicity, Corrosivity, Physical hazards, Health hazards are explained below with details.
1. Flammability: The ability of a material to catch fire and burn easily.
2. Reactivity: The ability of a material to chemically react with other materials, including the potential for explosions or release of toxic gases.
3. Toxicity: The ability of a material to cause harm or death when ingested, inhaled, or absorbed through the skin.
4. Corrosivity: The ability of a material to eat away at or damage other materials, including metals and human tissue.
5. Physical hazards: The potential of a material to cause harm through physical means, such as pressure, impact, or friction.
6. Health hazards: The potential of a material to cause harm to human health, including acute and chronic effects.
These are the six physical properties associated with hazard recognition of hazardous material.
To know more about physical properties please refer: https://brainly.com/question/1935242
#SPJ4
A beautyberry is a type of shrub that grows well in the southern United States. Some students have a small beautyberry shrub that is growing near their school. They record the number of berries, ripe or unripe, and the number of flowers at different times throughout the year.
Table. Column headings. Month, ripe berries, unripe berries, flowers. September, 9, 4, 2. October, 5, 10, 4. November, 5, 7, 3. December, 2, 3, 1. February, 3, 2, 0. March, 6, 11, 5. April, 12, 5, flowers 9. June, 3, 8, 2.
Which statement best explains what is shown in their data?
Choose the correct answer.
Responses
A.The beautyberry relies on wind to spread its seeds.
B..The beautyberry relies on one type of animal to eat the berries.
C.The beautyberry uses asexual reproduction to make new plants.
D.The beautyberry increases its chances of reproduction because its berries do not all become ripe at the same time.
The statement that best explains what is shown in their data is option D. The beautyberry increases its chances of reproduction because its berries do not all become ripe at the same time.
What is the beautyberry about?The data shows that the number of ripe berries and unripe berries varies from month to month, with the most ripe berries in April and the least in December.
This indicates that the beautyberry does not have all of its berries ripen at the same time, which increases the chances of some of them being eaten and spread by animals. This would help increase the chances of the beautyberry reproducing and spreading to new locations.
Therefore, It does not seem from the data provided that it relies on wind to spread its seeds or that it relies on one type of animal to eat the berries, or it uses asexual reproduction to make new plants.
Learn more about beautyberry from
https://brainly.com/question/26027910
#SPJ1
I need to know the Lewis structure for
CCI4
H2O
O2
N2
PH3
Please and thank you.
Two solitary sigma bonds are visible in the Lewis structure between the hydrogen and oxygen atoms.
What is Lewis structure explain with example?The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea is the foundation of a Lewis structure. An oxygen atom, as an illustration, has six electrons in its outer shell.
The entire molecule's electron density is concentrated only around the core C in the CCl4 Lewis structure. Two nitrogen atoms are connected by a triple bond in the N2 Lewis structure.
In the reaction described above, PH3 is acting as a Lewis base because of the single electron on the P atom.
A double bond exists between two oxygen atoms in the Lewis structure of O2. Oxygen atoms must form two bonds in order to comply with the octet rule. The oxygen (red) and hydrogen (white) atoms are held together by powerful connections known as covalent bonds.
To learn more about Lewis structure refer to:
https://brainly.com/question/20300458
#SPJ1
Which of the following require(s) resonance structures to more accurately represent their electron arrangements
The correct representation about resonance structures is that The structure of the species cannot be correctly predicted by a single resonance structure and the only way resonance structures vary is in the way the electrons are arranged.
In valence bond theory, resonance is defined as a hybrid structure formed by combining a variety of contributing structure into a resonance hybrid. Because orbitals overlap, resonance happens. Pi bonds, created when two 2p orbitals overlap, are the building blocks of double bonds. These pi orbitals' electrons are delocalized since they will be dispersed across more than two atoms.
Learn more about Resonance
brainly.com/question/29547999
#SPJ4
What is the molecular formula of a compound that has an empirical formula of CH2O and a molar mass of 120.12 g/mol
The molecular formula of a compound that has an empirical formula of CH₂O and a molar mass of 120.12 g/mol is C₄H₈O₄.
A molecular formula shows the number of different types of atoms that are present in a molecule whereas an empirical formula represents the simplest whole number ratio of the different atoms present in a molecule.
Given,
empirical formula= CH₂O
molar mass = 120.12 g/mol
To find: molecular formula
we know that,
atomic mass of carbon= 12 g/mol
atomic mass of hydrogen= 1g/mol
atomic mass of oxygen= 16 g/mol
molar mass of CH₂O
= (12+ 1×2 + 16) g/mol
=30 g/mol
therefore, molecular formula
⇒(CH₂O )n = 120.12
⇒30 n= 120.12
⇒n=120.12/30
⇒n= 4.004
⇒n≈4
Thus,
(CH₂O )n = (CH₂O )4 =C₄H₈O₄
Hence, molecular formula is C₄H₈O₄
To know more about molecular formula here
https://brainly.com/question/20366021
#SPJ4
Draw plausible electron dot structures for the following substances. Each substance contains only single covalent bonds. A. I2 B. OF2 C.H2S D.NI3.
The plausible electron dot structures of I₂, OF₂, H₂S, NI₃ substances are attached below.
How is an electron dot structured?Lewis dot structures, also known as electron dot structures, are diagrams that show how atoms in a molecule are chemically bonded to one another. They also show how many lone pairs there are in total among all the atoms that make up the molecule.
An electron configuration writing guide. The shell number (n) comes first in the symbols used to represent the electron configuration, followed by the type of orbital and, finally, a superscript that represents the number of electrons in the orbital. Examples include As you can see from the periodic table, oxygen has 8 electrons.
To know more about covalent bonds visit:
https://brainly.com/question/10777799
#SPJ4
For each of the following chemical equations, write all possible mole ratios. a. 2HgO(s) → 2Hg(l ) + O2(g) b. 4NH3(g) + 6NO(g) → 5N2(g) + 6H2O(l ) c. 2Al(s) + 3H2SO4(aq) → Al2(SO4)3(aq) + 3H2(g)
What is c. 2Al(s) + 3H2SO4(aq) → Al2(SO4)3(aq) + 3H2(g)
a) The mole ratio is 2/1
b) The mole ratio is 4/6
c) The mole ratio is 2/3
What is the mole ratio?We have to note that the mole ratio is the ratio of the stoichiometric coefficient that we have between two reactants that can be found in an equation. In the case of the reaction equations that we have, we must look closely at each equation.
As we can see, each of the reaction equations is balanced and we can now be able to obtain the mole ratio of each of the reaction as shown in the answer above.
Learn more about mole ratio:https://brainly.com/question/15288923
#SPJ1
A compound is found to contain 10.37 % phosphorus, 4.689 % nitrogen, and 84.95 % iodine by weight. The molecular weight for this compound is 298.8 g/mol. What is the molecular formula for this compound
Answer:
P₂N₂I₄
Explanation:
Firstly, we calculate the empirical formula of the compound. To do this we find the moles of each element. Treat the percentages as masses.
The formula for moles is:
[tex]moles = \frac{mass}{relative \: atomic \: mass}[/tex]
The masses of each element are:
Phosphorus = 10.37g
Nitrogen = 4.689g
Iodine = 84.95g
The relative atomic masses of each element are:
Phosphorus = 31.0
Nitrogen = 14.0
Iodine = 126.9
Using these values, we can calculate the moles of each element:
[tex]moles \: of \: phosphorus = \frac{10.37}{31.0} = 0.335[/tex]
[tex]moles \: of \: nitrogen \: = \: \frac{4.689}{14.0} = 0.335[/tex]
[tex]moles \: of \: iodine \: = \: \frac{84.95}{126.9} = 0.669[/tex]
Using the moles, write them in a ratio to find the ratio of moles:
Phosphorus : nitrogen: iodine
0.335 : 0.335: 0.669
The smallest number here is 0.335, so divide each number by 0.335
0.335÷0.335=1
0.335÷0.335=1
0.669÷0.335=1.99... = 2 (round to the nearest whole number)
These numbers are used as the subscripts of each element.
This means that the empirical formula is:
PNI₂
To calculate the molecular formula:
[tex]\frac{molar \: mass \: of \: molecular \: formula}{molar \: mass \: of \: empirical \: formula}[/tex]
The molar mass of empirical formula is adding the molar masses of compound PNI2:
31.0 + 14.0 + 126.9 = 171.9
The molar mass of molecular weight or mass = 298.8 (given from the question)
Substitute these in the formula above:
[tex] \frac{298.8}{171.9} = 1.738...[/tex]
1.738 = 2 rounded to the nearest whole number.
Multiply all the subscripts seen in the empirical formula by the number 2:
PNI₂ × 2 = P₂N₂I₄