show that if we try to prove this inequality using mathematical induction, the basis step works, but the inductive step fails.

The equivalent z-score for a raw score of 115 under a normal distribution with a mean of 100 and a standard deviation of 15 is 1.

Under the normal distribution, if the mean of the distribution of raw scores is equal to 100 and the standard deviation is known, we can use the z-score formula to calculate the equivalent z-score for any given raw score.

The z-score formula is given by:

z = (x - μ) / σ

where x is the raw score, μ is the mean of the distribution, σ is the standard deviation of the distribution, and z is the corresponding z-score.

Since the mean of the distribution is 100, we have μ = 100. To calculate the z-score, we need to know the standard deviation of the distribution or have information about the distance of the raw score from the mean in terms of standard deviations.

If we assume that the standard deviation is 15, which is a common value used in educational testing, and the raw score is 115, then the corresponding z-score would be:

z = (115 - 100) / 15 = 1

To learn more about z-score click on,

https://brainly.com/question/29382070

#SPJ4

Answer:

13/8

Step-by-step explanation:

You first find the lcm of 8 and 4 which is 8

Then make a dividing line (/) with the lcm as the numerator.

After which you start diviing the lcm by each denominator of the two terms, and then multiplying with their numerators:

8/8 x 7 + 8/4 x 3 all over the lcm which is 8

(1 x 7 + 2 x 3)/8

(7 + 6)/8

13/8

Answer:

It means the point x = 5 and y = 10

Answer: The place 5 units right and 10 units up from the center of the graph (the origin).

Step-by-step explanation:

Starting at the origin, the 5 represents moving right 5, and the 10 represents going up 5.

Answer: We can simplify the expression inside the absolute value first:

|(sqrt(2) + 3 - 5)|

= |(sqrt(2) - 2)|

Since sqrt(2) > 2, we know that sqrt(2) - 2 is negative. Therefore, we can rewrite the absolute value as a negative:

|sqrt(2) - 2| = -(sqrt(2) - 2)

So the expression without absolute value is:

-(sqrt(2) - 2)

Step-by-step explanation:

TRUE. Combinations and permutations are used in probability calculations to determine the number of possible outcomes in a sample space.

When order is important, permutations are utilized, and when order is not important, combinations are used. The formula P(n,r) = n!/(n-r)!, where n! signifies the factorial of n, and the expression C(n,r) = n!/r!(n-r)!, give the number of permutations of n items taken r at a time and the number of combinations of n objects taken r at a time, respectively.

It is possible to count the number of ways that a subset of items can be chosen from a larger set using both permutations and combinations. These ideas are crucial for estimating probabilities because they let us know how many different outcomes could satisfy a certain condition.

Learn more about probability here:

brainly.com/question/30034780

#SPJ1

The equation of the line in slope-intercept form is y = 2.5x + 210.

y = mx + b, where m is the line's slope and b is its y-intercept, is the equation of a line in slope-intercept form. This version of the equation is advantageous since it makes it simple to determine a line's slope and y-intercept and to utilise its equation to graph the line.

We may first apply the formula for the slope to get the slope of the line in order to calculate the equation of a line given two points. Next, we solve for the y-intercept using the slope-intercept version of the problem, substituting the slope and one of the supplied locations.

The given coordinates of the line are (46, 325) and (64, 370).

The slope is given by:

m = (y2 - y1) / (x2 - x1)

Substituting the values we have:

m = (370 - 325) / (64 - 46)

m = 45 / 18

m = 2.5

The slope intercept form of the line is given as:

y = mx + b

here, b is the y-intercept.

325 = 2.5(46) + b

b = 325 - 115

b = 210

Hence, the equation of the line in slope-intercept form is y = 2.5x + 210.

Learn more about slope intercept form here:

https://brainly.com/question/29146348

#SPJ1

Answer:

The absolute extrema is minimum at (-1, 2/9)

Step-by-step explanation:

Absolute extrema is a logical point that shows whether a the curve function is maximum or minimum.

Forexample a curve in the image attached. A, B and C are points of absolute maxima or absolute maximum. and P and Q are points of absolute minima or minimum.

Remember A, B, C, P, Q are critical points or stationary points.

How do we find absolute extrema?

The find the sign of the second derivative of the function.

From the question;

[tex]{ \sf{g(x) = \sqrt[3]{x} }} \\ \\ { \sf{g(x) = {x}^{ \frac{1}{3} } }} \\ [/tex]

Find the first derivative of g(x)

[tex]{ \sf{g {}^{l}(x) = \frac{1}{3} {x}^{ - \frac{2}{3} } }} \\ [/tex]

Find the second derivative;

[tex]{ \sf{g {}^{ll} (x) = ( \frac{1}{3} \times - \frac{2}{3}) {x}^{( - \frac{2}{3} - 1) } }} \\ \\ { \sf{g {ll}^{(x)} = - \frac{2}{9} {x}^{ - \frac{5}{3} } }}[/tex]

Then substitute for x as -1 from [-1, 1]

[tex]{ \sf{g {}^{ll}(x) = - \frac{2}{9} ( - 1) {}^{ - \frac{5}{3} } }} \\ \\ = \frac{ - 2}{9} \times - 1 \\ \\ = \frac{2}{9} [/tex]

Since the sign of the result is positive, the absolute extrema is minimum

The range of the function m is [1, ∞). Thus, B is correct option.

The dοmain οf a functiοn is the cοllectiοn οf values that can be plugged intο it. This set represents the x values in a functiοn like f. (x). A functiοn's range is the set οf values that the functiοn can take οn. This is the set οf values returned by the functiοn when we enter an x value.

Tο determine the range οf functiοn m, we must first determine the set οf all pοssible functiοn οutput values.

Looking at the function graph, we can see that the lowest point is (3, 1) and the highest point is (∞, ∞).

As a result, the function m has a range of [1, ∞).

We can write: in interval notation:

m ∈ [1, ∞) range.

To know more about Range visit:

brainly.com/question/29145252

#SPJ1

The values of a such that p({z > 1.35}) or {z > 2.34}) is 0.0981.

Let z be a standard normal random variable.

The standard normal distribution is a probability distribution that is symmetric around a mean of zero and has a standard deviation of one. It is also referred to as the Gaussian distribution or the normal distribution. This distribution is commonly used in the field of statistics to measure the likelihood of certain outcomes.

We have to determine the values of a such that p({z > 1.35}) or {z > 2.34}).

p(z > 1.35) + p(z > 2.34) = p(z > a)

After using the standard normal distribution table.

0.0885 + 0.0096 = p(z > a)

p(z > a) = 0.0981

p(z > 1.29) = 0.0981

To learn more about standard normal random link is here

brainly.com/question/14782203

#SPJ4

In response to the stated question, we may state that Hence, the 95% CI function for u is (16.72, 19.48), rounded to two decimal places in increasing order.

In mathematics, a function is a connection between two sets of numbers in which each member of the first set (known as the domain) corresponds to a single element in the second set (called the range). In other words, a function takes inputs from one set and produces outputs from another. Inputs are commonly represented by the variable x, whereas outputs are represented by the variable y. A function can be described using an equation or a graph. The equation y = 2x + 1 represents a linear function in which each value of x yields a distinct value of y.v

We use the following formula to create a confidence interval around the population mean u:

CI = x ± z*(s/√n)

where x represents the sample mean, s represents the sample standard deviation, n represents the sample size, z represents the z-score associated with the desired degree of confidence, and CI represents the confidence interval.

Because the degree of confidence is 95%, we must calculate the z-score that corresponds to the standard normal distribution's middle 95%. This is roughly 1.96 and may be determined with a z-table or calculator.

CI = 18.1 ± 1.96*(4.1/√34)

CI = 18.1 ± 1.96*(0.704)

CI = 18.1 ± 1.38

Hence, the 95% CI for u is (16.72, 19.48), rounded to two decimal places in increasing order.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

Answer: 5p = 40

Step-by-step explanation:

5 X p = 40

5/5 40/5

p = 8

Answer:

x = 4

Step-by-step explanation:

using the rule of exponents

• [tex]a^{-m}[/tex] = [tex]\frac{1}{a^{m} }[/tex] , then

[tex]4^{-x}[/tex] = [tex]\frac{1}{4^{x} }[/tex]

and 256 = [tex]4^{4}[/tex]

then

[tex]\frac{1}{4^{x} }[/tex] = [tex]\frac{1}{4^{4} }[/tex]

so

[tex]4^{x}[/tex] = [tex]4^{4}[/tex]

since bases on both sides are equal, bot 4 then equate exponents

x = 4

A) Values of y will be 1, 0, -1, 0, 1

B) and C) plot the values as shown in below figure.

Trigonometric functions are a set of mathematical functions that relate the angles and sides of right triangles.

A) for f(x) = cos x; the values of x-y chart are:

  x                   y = f(x)

  0                      1

  [tex]\frac{\pi }{2}[/tex]                      0

  [tex]\pi[/tex]                      -1

  [tex]\frac{3\pi }{2}[/tex]                     0

  [tex]2\pi[/tex]                     1

B) the points are plotted as given figure below.

C) Connects the dots to show the graph of y = cos x; sown in figure below please check it.

To know more about plot, visit:

https://brainly.com/question/30339669

#SPJ1

The value of the equation (fxg)(-1) is 10.

An equation is a mathematical statement that shows that two expressions are equal. It usually includes variables, which are represented by letters or symbols, and constants, which are fixed values.

There are several types of equations in mathematics. Here are some of the most common types:

Linear equation: An equation of the form "ax + b = c", where "a", "b", and "c" are constants and "x" is the variable. The graph of a linear equation is a straight line.Quadratic equation: An equation of the form "ax² + bx + c = 0", where "a", "b", and "c" are constants and "x" is the variable. The graph of a quadratic equation is a parabola.

Cubic equation: An equation of the form "ax³ + bx² + cx + d = 0", where "a", "b", "c", and "d" are constants and "x" is the variable. The graph of a cubic equation is a curve that can have one or two humps.

In the given question,

To find (f x g)(-1), we need to evaluate the product of f(-1) and g(-1).

First, we find f(-1):

f(-1) = -3(-1) - 1 = 2

Next, we find g(-1):

g(-1) = -1 - 4 = -5

Now, we can find the product (f x g)(-1):

(f x g)(-1) = f(-1) x g(-1) = 2 x (-5) = -10

Therefore, (f x g)(-1) = -10.

To know more about equations, visit:https://brainly.com/question/11897796

#SPJ1

The first of these two events is the number displayed on the cube. The result of the coin toss is the second. There should be two columns in this tree, one for each occurrence.

a list or tree digrams to represnts the sample space in the given below figure . Observe the first column first. Let the number cube's result be. The following six values are possible:. Six branches, one for each outcome, result from that proceed to the following column. Let the result of the coin toss be. There would always be two possible results for, regardless of the number obtained for.

The first of these two events is the number displayed on the cube. The result of the coin toss is the second. There should be two columns in this tree, one for each occurrence.

Observe the first column first. Let N represent the number cube's result. Six values are possible: 1, 2, 3, 4, 5, and 6. Six branches, one for each outcome, result from that. proceed to the following column. Let the result of the coin toss be. There would always be two possible results for, regardless of the number obtained for.

To know more about tree digrams, click the below link

https://brainly.com/question/16827650

#SPJ4

the actual question is :

The number cube is rolled and a coin is tossed . How can you sketch a tree diagram to represent the sample space ?

Desmοnd receives a discοunt οf R183.675. We can rοund this tο R183.18 οr R183.18, depending οn the desired level οf precisiοn.

We all are eager abοut availing discοunts, but we barely knοw hοw we get these discοunts. There is a prοper way tο calculate discοunt and that we dο by using a discοunt fοrmula. The discοunt rate fοrmula can either be extracted by subtracting the selling price οf the prοduct frοm its marked price οr by multiplying the discοunt rate οffered and the marked price οf the prοduct. In terms οf Mathematics, the fοrmula fοr discοunt is represented as belοw,

Accοrding tο given infοrmatiοn,

Tο calculate the discοunt Desmοnd receives, we first need tο find 53.5% οf the οriginal price. We can dο this by multiplying the οriginal price by 0.535:

R395 x 0.535 = R211.325

Sο, Desmοnd pays R211.325 fοr his purchase after the discοunt.

Tο find the amοunt οf discοunt, we need tο subtract the discοunted price frοm the οriginal price:

R395 - R211.325 = R183.675

Therefοre, Desmοnd receives a discοunt οf R183.675. We can rοund this tο R183.18 οr R183.18, depending οn the desired level οf precisiοn.

To know more about discount visit :

https://brainly.com/question/3541148

#SPJ1

The probability of selecting an officer who is in the Navy given that the officer is African American is 0.192.

Probability calculates the likelihood that an event would happen. The likelihood that an event would occur has a value that lies between 0 and 1 or 0 and 100. The more likely an event would happen, the closer the probability value would be to 1 or 100.

The probability of selecting an officer who is in the Navy given that the officer is African American = number of African Americans that are in the Navy / total number of African Americans

Total number of African Americans = 9162 + 3524 + 1341 + 4282 = 18,309

The probability = 3524 / 18,309 = 0.192

Please find attached the complete question. To learn more about probability, please check: https://brainly.com/question/13234031

#SPJ1

Answer:

Step-by-step explanation:

4x+4 = 4

Subtract 4 from both sides:-

4x+4-4 = 4-4

4x = 0

Divide both sides by 4:-

4x/4 = 0/4

x = 0

Answer:

y = (-1/3)x^2 - 2x + 5/3

Step-by-step explanation:

To find the quadratic equation that passes through these points, we can start by using the standard form of a quadratic equation:

y = ax^2 + bx + c

We know that the graph passes through the point (-2,2), so we can substitute these values into the equation:

2 = a(-2)^2 + b(-2) + c

Simplifying this equation, we get:

4a - 2b + c = 2

We also know that the graph has x-intercepts at (-1,0) and (6,0). This means that when x = -1 and x = 6, the value of y (i.e., the height of the graph) is 0. We can use these two points to write two more equations:

0 = a(-1)^2 + b(-1) + c

0 = a(6)^2 + b(6) + c

Simplifying these equations, we get:

a - b + c = 0

36a + 6b + c = 0

Now we have a system of three equations:

4a - 2b + c = 2

a - b + c = 0

36a + 6b + c = 0

We can solve for a, b, and c using any method of solving systems of equations. One way is to use substitution:

From the second equation, we get:

c = b - a

Substituting this into the other two equations, we get:

4a - 2b + (b - a) = 2

36a + 6b + (b - a) = 0

Simplifying these equations, we get:

3a - b = 1

35a + 7b = -b

Multiplying the first equation by 7 and adding it to the second equation, we eliminate b:

21a = -7

a = -1/3

Substituting this value of a into the first equation, we can solve for b:

4(-1/3) - 2b + (b - (-1/3)) = 2

-4/3 - b + b + 1/3 = 2

b = -2

Finally, we can use either of the first two equations to solve for c:

c = a - b = (-1/3) - (-2) = 5/3

So the quadratic equation in standard form is:

y = (-1/3)x^2 - 2x + 5/3

Answer:

Highlight "x" then it's an acute angle

Step-by-step explanation:

The z-scores that represent the middle 50% of the standard normal distribution are between -0.6745 and 0.6745, the lowest 5% of the standard normal distribution is -1.645, and the 90% of the standard normal distribution is between -1.645 and 1.645.

The mean and variance of a standard normal distribution are both 0. A z distribution is another name for this.

Yes, here are the z-scores for the given standard normal areas:

A. Middle 50%: The area between the 25th and 75th percentiles corresponds to the middle 50% of the standard normal distribution. Using Excel's NORM.S.INV() function, we can calculate the z-scores that correspond to those percentiles as follows:

-0.6745 is the z-score corresponding to the 25th percentile.

The 75th percentile z-score is 0.6745.

As a result, the z-scores representing the middle 50% of the standard normal distribution range between -0.6745 and 0.6745.

B. Lowest 5%: The area to the left of the 5th percentile corresponds to the lowest 5% of the standard normal distribution. Using Excel's NORM.S.INV() function, we can calculate the z-score that corresponds to that percentile as follows:

The z-score associated with the fifth percentile is -1.645.

As a result, the z-score representing the bottom 5% of the standard normal distribution is -1.645.

C. Middle 90%: The area between the 5th and 95th percentiles corresponds to the middle 90% of the standard normal distribution. Using Excel's NORM.S.INV() function, we can calculate the z-scores that correspond to those percentiles as follows:

The z-score associated with the fifth percentile is -1.645.

The z-score associated with the 95th percentile is 1.645.

As a result, the z-scores representing the middle 90% of the standard normal distribution range between -1.645 and 1.645.

To know more about standard normal distribution visit:

https://brainly.com/question/29509087

#SPJ1

Cash price to the buyer, if he pays by cash:

The cash price would be 10% less than the retail price of $4,500:

Cash price = $4,500 - (10% * $4,500)

Cash price = $4,500 - $450

Cash price = $4,050

Amount payable:

If the buyer chooses to purchase the TV on higher purchase, the amount payable would be the sum of the down payment and the total amount of monthly installments:

Amount payable = Down payment + (24 * Monthly installment)

Amount payable = $675 + (24 * $212.50)

Amount payable = $5,175

Outstanding balance:

The outstanding balance would be the difference between the amount payable and the down payment:

Outstanding balance = Amount payable - Down payment

Outstanding balance = $5,175 - $675

Outstanding balance = $4,500

Hire purchase price:

The hire purchase price would be the sum of the down payment and the outstanding balance:

Hire purchase price = Down payment + Outstanding balance

Hire purchase price = $675 + $4,500

Hire purchase price = $5,175

Interest:

The interest charged on the hire purchase would be the difference between the hire purchase price and the cash price:

Interest = Hire purchase price - Cash price

Interest = $5,175 - $4,050

Interest = $1,125

Difference between the hire purchase and the cash price:

The difference between the hire purchase price and the cash price would be the interest charged:

Difference = Interest

Difference = $1,125

Percentage interest charged:

To calculate the percentage interest charged, we can divide the interest by the hire purchase price and multiply by 100:

Percentage interest charged = (Interest / Hire purchase price) * 100

Percentage interest charged = ($1,125 / $5,175) * 100

Percentage interest charged = 21.74%

Therefore, the cash price to the buyer is $4,050, the amount payable is $5,175, the outstanding balance is $4,500, the hire purchase price is $5,175, the interest charged is $1,125, the difference between the hire purchase and the cash price is $1,125, and the percentage interest charged is 21.74%.

The probability that  sum of two randomly selected dice is 7 is 1/2. The given that the sum of the dice is 7, the probability that both dice are 6-sided is 1/3.

a. Each pair has a probability of being selected of 1/3 * 1/2 = 1/6. Now sum of the probabilities of the three pairs that have a sum of 7:  P = P(4-6) + P(6-4) + P(6-6) = 1/6 + 1/6 + 1/6 = 1/2

b. Given that the sum of the dice is 7, there are three possible pairs that could have been rolled: (1-6), (2-5), or (3-4). Of these, only one pair has both dice as 6-sided.  

P = (1/3 * 1/2) / (1/2) = 1/3

To know more about probability, here

brainly.com/question/30034780

#SPJ4

The probability of a claim being both fire and fraudulent is:

P(Fire and Fraud) = number of claims that are both fire and fraudulent/total number of claims

= 16 / 100

= 0.16

We can use the information given to construct a contingency table as follows:

Fraud No Fraud Total

Fire 16 24 40

No Fire 24 36 60

Total 40 60 100

This table shows the number of insurance claims that fall under each combination of the FIRE and FRAUD events. For example, 16 claims are both fire and fraudulent, and 24 claims are fire but not fraudulent.

We can also calculate some probabilities from this table. For example, the probability of a claim being fraudulent is:

P(Fraud) = number of fraudulent claims / total number of claims

= 40 / 100

= 0.4

Find out more about probability

brainly.com/question/15684821

#SPJ4

Question:-We are working on a survey that shows what 100 insurance holders claim for that survey. We find that 40 are fire claims (FIRE), 16 of which are fraudulent (FRAUD). Also, there are a total of 40 fraudulent claims.

(a) Let us construct a contingency table summarizing the claims data. Use the pairs of

Events FIRE and, FRAUD and  as shown below:

Fraud No Fraud Total

Fire 16 24 40

No Fire 24 36 60

Total 40 60 100

Parameterizing a surface over a rectangle Parameterizing the surface z = x²+2y² over the rectangular region R defined by -3 ≤ x ≤ 3, −1 ≤ y ≤ 1 are falls under the range of R.

Let's start by expressing x and y as functions of u and v. Since x varies between -3 and 3 over R, we can use the following parameterization for x:

x = u

where u varies between -3 and 3. Similarly, since y varies between -1 and 1 over R, we can use the following parameterization for y:

y = v

where v varies between -1 and 1.

Next, we can use these parameterizations for x and y to express z as a function of u and v. Substituting x = u and y = v into the equation z = x² + 2y², we get:

z = u² + 2v²

So, the parameterization of the surface z = x² + 2y² over the rectangular region R is given by:

x = u, y = v, z = u² + 2v²

where -3 ≤ u ≤ 3 and -1 ≤ v ≤ 1.

The parameterization allows us to study various properties of the surface z = x² + 2y² over the rectangular region R.

To know more about surface area here

https://brainly.com/question/27784309

#SPJ4

Complete Question:

Parameterizing a surface over a rectangle Parameterizing the surface z = x²+2y² over the rectangular region R defined by -3 ≤ x ≤ 3, −1 ≤ y ≤ 1.

By answering the presented questiοn, we may cοnclude that 0.4 οf an expressiοns hοur is 0.4 x 60 = 24 minutes in this situatiοn. As a result, 3.4 hοurs equals 3 hοurs and 24 minutes.

An expressive in mathematics is a collection of numbers, variables, and complicated mathematical operations (such as addition, subtraction, multiplication, division, multiplicands, and others) that convey a quantity's value. Expressions can be as straightforward as "3 + 4" or as complex as "(3x2 - 2) / (x + 1)". They could also include functions like "sin(x)" or "lg(y)".

The real way to evaluate an expression is to insert the variables with their values and carry out the arithmetic operations in the order specified. For instance, the phrase "3x + 5" means 3(2) + 5 = 11 if x = 2. In mathematics, expressions are typically used to describe actual situations, build equations, and decompose challenging mathematical diagrams.

3 hοurs and 24 minutes is cοmparable tο 3.4 hοurs.

Yοu may separate the full number (which represents the hοurs) frοm the decimal tο cοnvert decimal hοurs tο hοurs and minutes (which represents the fractiοn οf an hοur in minutes).

0.4 οf an hοur is 0.4 x 60 = 24 minutes in th

is situation. As a result, 3.4 hours equals 3 hours and 24 minutes.

To know more about expressions visit :-

brainly.com/question/14083225

#SPJ1

Answer:

$31,142

Step-by-step explanation:

To convert a percentage into a decimal, you move the decimal two places to the left. 1354% converted into a decimal is 13.54.

$23,000 * 13.54 = $31,142

The velocity with which we have to move to have the momentum equal to the car is 46.78 km/h.

Linear momentum is the vector quantity and described as the product of the mass of an object, m, and its velocity, v. It is represented by the symbol "p," which is also used to denote momentum. Please be aware that the body's momentum always points in the same direction as its vector of motion.

We are given:-

The mass of the car (M1) = 1490kg.

The velocity of the car (V1V1)= 2.7 km/h.

The formula to calculate linear momentum:- linear momentum= mass of the body* Velocity of the body (P= mvmv)

therefore, the momentum (P1) of the car = M1V1

P1= 1490*2.7= 4023

let momentum of yourself is P2 which is equal to P1 according to the question, Hence P2= 4023.

M2= 86 kg.

V2= ?

P2= M2V2

V2= P2/M2
V2 = 4023/86

V2= 46.78 km/h.

hhence toto the velocity with which we have to run to get momentum equal to the car is 46.78 km/h.

To know more about momentum go through:-

https://brainly.com/question/7538238

#SPJ4

The percent abundance of medium nails in the sample is approximately 18.95%.

An average value for a collection of data is calculated statistically via weighted averaging, where each data point is assigned a weight based on its relative relevance or frequency. This method is frequently applied when certain data points are more important than others or when the sample sizes for several sets of data vary. Each data point is multiplied by its weight in weighted averaging, and the resulting products are added up and divided by the overall weight.

The number of each type of nail is:

Abundance = 67 + 18 + 10 = 95

The weighted average is:

Weighted Average = (Abundance1 x Value1 + Abundance2 x Value2 + ... + AbundanceN x ValueN) / Total Abundance

For different types of nails we have:

Short nail: Abundance1 = 67, Value1 = 2.5

Medium nail: Abundance2 = 18, Value2 = 5.0

Long nail: Abundance3 = 10, Value3 = 7.5

Substituting the values:

Weighted Average = (67 x 2.5 + 18 x 5.0 + 10 x 7.5) / 95

Weighted Average ≈ 3.53

The percent abundance is:

Percent Abundance = (Abundance2 / Total Abundance) x 100%

Substituting the values:

Percent Abundance = (18 / 95) x 100%

Percent Abundance ≈ 18.95%

Hence, the percent abundance of medium nails in the sample is approximately 18.95%.

Learn more about weighted average here:

https://brainly.com/question/30412057

#SPJ1