Simplify without calculator: (-5) (7)+4×5 (Show all calculations)​

the x-value that makes the two equations equal is x = -1. and x=0.

An equation consists of two parts: the left-hand side (LHS) and the right-hand side (RHS), connected by an equals sign (=). The LHS and RHS may contain one or more variables, which are values that can change or vary.

The first equation, y = -3/2, is a horizontal line with a y-intercept of -3/2. This means that no matter what x-value we plug in, the corresponding y-value will always be -3/2.

The second equation, y = (1/2) x - 1, is the equation of a line with slope 1/2 and y-intercept -1. To find the x-value(s) where this equation equals -3/2, we can set the two equations equal to each other:

-3/2 = (1/2) x - 1

Adding 1 to both sides, we get:

-1/2 = (1/2) x

Multiplying both sides by 2, we get:

-1 = x

At x=0, two equation satisfy the condition.

Therefore, the x-value that makes the two equations equal is x = -1 and 0.

To know more about line, visit:

https://brainly.com/question/30003330

#SPJ1

When coffee beans sell for $5 per pound, producers supply 9 million pounds. This indicates that at a higher price, producers are willing to supply a larger quantity of coffee beans.

This means that at a lower price, producers will supply a smaller quantity of coffee beans. Conversely, when the price of coffee beans increases to $15 per pound, producers supply 40 million pounds.

The relationship between price and quantity supplied is a fundamental concept in economics. When prices are lower, producers may not have enough incentive to produce and supply goods. On the other hand, when prices are higher, producers may have more incentive to produce and increase their supply. This is often referred to as the law of supply.

Understanding this relationship is important for businesses and policymakers to make informed decisions about pricing and production. By analyzing market trends and the behavior of producers, they can adjust prices to maintain a balance between supply and demand. For example, if prices are too high, it may lead to a surplus of goods that cannot be sold, while prices that are too low may result in shortages or supply constraints.

In conclusion, the relationship between price and the supply of coffee beans reflects a broader economic principle that is essential for understanding how markets work. By examining the supply curve, we can gain insights into how producers respond to changes in price, and use this information to make informed decisions about pricing and production.

To know more about coffee beans sell click here:

brainly.com/question/4264469

#SPJ4

Answer: 45 meters

Step-by-step explanation:

The given equation is:

s = (1/2) * g * t^2

Where,

g = acceleration due to gravity = 10 m/s^2 (approximate value)

To find the distance it falls in 3 seconds, we can substitute t = 3 in the above equation:

s = (1/2) * g * t^2

s = (1/2) * 10 * 3^2

s = (1/2) * 10 * 9

s = 45 meters

Therefore, the stone falls 45 meters in 3 seconds.

Answer:

Answer:

D) x = 1,200 + 1,200(0.025)(9)

In this equation, 1,200 is the initial deposit, 0.025 is the decimal representation of the annual interest rate, and 9 represents the time period in months. The multiplication of 0.025 and 9 gives the proportion of interest earned in 9 months, which is then multiplied by the initial deposit and added to it to give the total amount in the account after 9 months.

Simplifying the equation:

x = 1,200 + (1,200)(0.025)(9)

x = 1,200 + 270

x = 1,470

Therefore, there would be $1,470 in the account after 9 months

Answer:

Step-by-step explanation:

Solve for x

(x-14)+(2x+8)= 180

3x-14+8=180

3x-6=180

3x=186

x=62degrees

Solve for y

(7y-15)+62=180

7y+47=180

7y=180-47

7y=133

y=19degrees

Caludia needs to pay 2917.6128 as a payment of compound interest capital+interest.

What is compound interest?

compound interest is interest on principal + interest and this denotes to the addition of interest to the principal amount of a loan or deposit.

Capital(p) = $6400

Rate of interest(r) = 11%

Years(n) = 3

The general formula of compound interest is [tex]A= p(1+\frac{r}{100}})^n[/tex].

Now

[tex]A= 6400(1+\frac{11}{100}})^3\\A=6400 \times \frac{111}{100} \times \frac{111}{100} \times \frac{111}{100}\\A= 8752.8384[/tex]

The entire amount (Capital+interest) is equal to $8752.8384.

If we take 1 year as a period then Claudia needs to pay [tex]\frac{8752.8384}{3}\\=2917.6128[/tex]

Therefore, Claudia needs to pay 2917.6128 as a payment of compound interest capital+interest.

Learn more about compound interest from the given link

https://brainly.com/question/28020457

#SPJ1

Two radicals are said to be radicals if they have the same indices and the radicand.

In mathematics, a radicand is an expression, a number, or a variable that is enclosed in a root symbol. The factor for which we are determining the root is quantity. As we study exponents and roots, the word "radicand" is utilised. Therefore, the radicand in 2 has a value of 2. Following are some radicand examples:

3√(pq) → pq is the radicand

√(a+b) → a + b is the radicand

4√15 → 15 is the radicand

A radical is a symbol used to represent a number's root. It is symbolised as. The word or phrase that appears after the radical symbol is known as the radicand. Hence, it may be claimed that the radical represents the radicand. Alternatively said, the radicand sign is √.

Learn more about Radicand:

https://brainly.com/question/14963020

#SPJ4

Complete question:

Type the correct words in the blanks:

Two radicals are said to be radicals if they have the same               and the radicand.

Answer:

----------------------------------

There are 3 of 3's  and 2 of 5's out of 12 sides.

The probability of rolling either 3 or 5 is:

Answer:

36

9

1/4

Step-by-step explanation:

hope I helped ya :]

This illustrates the rule of large numbers, according to which the sample mean approaches the population mean as the sample size rises.

The likelihood or chance of an occurrence occurring is measured by probability. It is expressed as a number between 0 and 1, with 0 denoting impossibility and 1 denoting certainty of the occurrence. Additionally, probabilities can be stated as percentages, with 0% denoting an improbable event and 100% denoting a specific event. By dividing the number of favourable outcomes by the total number of potential outcomes, the probability of an occurrence is determined.

given

Since there are six potential outcomes and only one of them is a 5, the theoretical probability of rolling a 5 on a fair die is 1/6.

Mya's experimental chance of rolling a 5 after 100 trials is 25/100, which can be expressed as 1/4. Her experimental probability after 200 attempts is 30/200, which can be expressed as 3/20.

This implies that the experimental probability moves closer to the theoretical probability as the number of trials rises.

In other words, Mya's experimental findings get closer to the anticipated theoretical probability the more times she rolls the die.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

The complete question is :-   Communicate and Justify Mya rolls a fair die and counts the number of times she rolls a 5. She rolls a 5 on 25 of the first 100 trials. She rolls a 5 on 30 of the first 200 trials. Compare the experimental probability to the theoretical probability after 100 trials and 200 trials. What do you notice? Explain.

The distribution of Z=X+Y is gamma(1,10), which has a probability density function f(z) = 10 × e^(-10z), 0 ≤ z.

The moment generating function (mgf) of Z=X+Y can be found by taking the product of the mgfs of X and Y

Mz(t) = Mx(t) × My(t) = (e^(-4+4t))×(e^(-6+6t)) = e^(-10+10t)

We recognize that Mz(t) is the mgf of the gamma distribution with shape parameter k=1 and rate parameter λ=10. Therefore, Z=X+Y follows a gamma distribution with shape parameter k=1 and rate parameter λ=10.

In summary, the distribution of Z is gamma(1,10), which has a probability density function f(z) = λ^k × z^(k-1) × e^(-λz) / Γ(k) where k=1 and λ=10. Therefore, the probability density function of Z is f(z) = 10 × e^(-10z), 0 ≤ z.

Learn more about moment generating function here

brainly.com/question/29849939

#SPJ4

I have solved the question in general, as the given question is incomplete.

The complete question is:

What is the distribution of Z and the value of the parameter?

It involves selecting 35 candies from a bag containing 20 strawberry, 20 cherry, and 10 orange Starburst candies. X is the number of strawberry candies selected. X has a hypergeometric distribution, with possible values from 0 to 20. P(X > 18) is 0.0125, and probability mass function P(X = 3) is 0.0783. The expected value of X is 14, and the variance of X is approximately 5.67.

X has a hypergeometric distribution with parameters M=40 (20+20), N=50 (20+20+10), and n=35.

X can take on values from 0 to 20, since there are only 20 strawberry candies in the bag.

Using the cumulative distribution function for the hypergeometric distribution, we have P(X > 18) = 0.0125.

Using the probability mass function for the hypergeometric distribution, we have P(X = 3) = 0.0783.

The expected value of X is E[X] = np = 35(20/50) = 14.

The variance of X is Var[X] = np(1-p)(N-n)/(N-1) = (35)(20/50)(30/49)(40/49) ≈ 5.67.

To know more about probability mass function:

https://brainly.com/question/30070005

#SPJ4

We can use the formula for compound interest to solve this problem:

A = P(1 + r/n)^(nt)

where:

A = the final amount (6700 dollars)

P = the principal amount (5500 dollars)

r = the annual interest rate (4.5% or 0.045)

n = the number of times the interest is compounded per year (once annually)

t = the time period (in years) for which the money is invested

Substituting these values in the formula, we get:

6700 = 5500(1 + 0.045/1)^(1t)

Dividing both sides by 5500, we get:

1.21818181818 = 1.045^t

Taking the logarithm (base 10) of both sides, we get:

t = log(1.21818181818) / log(1.045)

Solving this equation using a calculator, we get:

t ≈ 4.4

Therefore, the person must leave the money in the bank for approximately 4.4 years (to the nearest tenth of a year) until it reaches 6700 dollars.

The bearing of G from H at the given point location is determined as  155⁰.

Bearing as a direction refers to the direction or angle of an object or location relative to a reference point, usually measured in degrees. For example, a compass can be used to determine the bearing of a landmark or to navigate in a particular direction.

The bearing of G from H is calculated by applying the following principle;

Let the bearing of G from H = θ

θ = 360 - 205 ( sum of angles in a circle )

θ =  155⁰

Learn more about bearing here: https://brainly.com/question/28782815

#SPJ1

If a whole number has a whole number square root, it means that there exists a number that you can multiply by itself to get that number.

Let us understand this statement by taking example, the whole number 9 has a whole number square root, which is 3. This means that 3 multiplied by itself gives 9: 3 x 3 = 9. Similarly, the whole number 16 has a whole number square root, which is 4. This means that 4 multiplied by itself gives 16: 4 x 4 = 16.

However, not all whole numbers have whole number square roots. For example, the whole number 2 does not have a whole number square root, which means that there is no whole number you can multiply by itself to get 2. In this case, we would say that 2 is an "irrational" number, because its square root is not a whole number or a fraction of whole numbers.

To know more about Whole number:

https://brainly.com/question/29766862

#SPJ4

Answer:

12075

Step-by-step explanation:

Simply multiply both terms together

483 x 25 = 12075

The workload of the resource is 20.5 units.

To calculate the workload of a resource that serves different flow unit types, one must know the amount of flow units, the processing time for each flow unit, and the number of resources available. This is best calculated using Little's Law, which states that the average number of flow units in a system is equal to the average rate of flow units multiplied by the average time they spend in the system.

For example, if a resource is serving 3 flow unit types, A, B and C, with 10, 8 and 5 units respectively, and a processing time of 2 minutes, 1 minute and 3 minutes respectively, with 2 resources available, the workload can be calculated as follows:

Workload = (10*2 + 8*1 + 5*3) / 2

       = 41 / 2

       = 20.5 units

Therefore, the workload of the resource is 20.5 units.

Learn more about average time here:

https://brainly.com/question/23692925

#SPJ4

Complete question

What are the flow unit types that the resource is serving?

Answer:

C: 8, 9, 10

Step-by-step explanation:

Triangle ADE has a surface area of 75 cm².

Triangle area determination. Use the equation area = 1/2 * base * height to determine a triangle's surface area. Decide which side will serve as the triangle's base, then calculate the triangle's height from that base.

Using similarity to determine y's value

AD/BD = AE/BE

y/(a-x) = y/x

yx = y(a-x)

x = a/2

This fact can be used to determine the height of the trapezoid:

h = √(BC² - [(AB-DC)/2]²)

= √(10² - [2²]²)

= 8

Now that we know how long MD is, we can:

As a result of the triangles ADE and BDE's resemblance, we can now determine the value of y:

y/BD = AE/BE

y/(a-x) = y/x

yx = y(a-x)

x = a/2

Substituting x = a/2 and BD = AB - DC = 10 - 6 = 4, we get:

y/4 = AE/(a/2)

y = 2AE/a

Substituting y = 2AE/a in the above equation, we get:

(2AE/a)/4 = AE/(a/2)

AE = (a/2)²/2

We may now apply the triangle's area formula, ADE:

Area of ADE = (1/4) x y x (a+b)

= (1/4) x 2AE/a x (a+b)

= (1/8) x (a²/2) x (a+b)

= (1/16) x a² x (a+b)

Substituting a = 10 and b = 6, we get:

Area of ADE = (1/16) x 10² x (10+6)

= 75 cm².

To know more about triangle visit:-

https://brainly.com/question/2773823

#SPJ1

The given system of equations above is graphed in the xy -plane, then the x-coordinate of the intersection point (x, y) is -1.0625.

What is the system of equations?

A system of equations is a collection of one or more equations that are considered together. The system can consist of linear or nonlinear equations and may have one or more variables. The solution to a system of equations is the set of values that satisfy all of the equations in the system simultaneously.

There are different methods to find the solution of a system of two equations in two variables, but one common one is to use elimination or substitution. Here, we will use substitution.

From the first equation, we can isolate x in terms of y by adding 1.5y to both sides and dividing by 2.4:

2.4x - 1.5y = 0.3

2.4x = 1.5y + 0.3

x = (1.5/2.4)y + 0.3/2.4

x = 0.625y + 0.125

Now we substitute this expression for x into the second equation and solve for y:

1.6x + 0.5y = −1.3

1.6(0.625y + 0.125) + 0.5y = −1.3

1.0y = −1.8

y = −1.8/1.0

y = −1.8

Finally, we substitute this value of y back into either equation to find the corresponding x-coordinate:

x = 0.625y + 0.125

x = 0.625(-1.8) + 0.125

x = −1.0625

Therefore, the x-coordinate of the intersection point (x, y) is -1.0625.

To learn more about the system of equations visit:

https://brainly.com/question/25976025

#SPJ1

Answer:

Step-by-step explanation:

y=cos2x

y1=-2sin2x=2cos(2x+π/2)

y2=-2*2sin (2x+π/2)=2²cos(2x+π/2+π/2)=2²cos(2x+2*π/2)

y3==2²*-2sin(2x+2*π/2)=2³cos(2x+2*π/2+π/2)=2³cos(2x+3π/2)

......................................................................................................

y45=2^{45}cos(2x+45π/2)

Answer: an = 128 * (1/4)^n

Step-by-step explanation:

The given sequence is not an arithmetic or geometric sequence, but we can try to find a pattern using algebra. Let's assume that the formula for the nth term is of the form:

an = a * b^n

where a and b are constants to be determined. We can find these constants by using the first two points:

a * b^1 = 32 (when n = 1)

a * b^2 = 8 (when n = 2)

Dividing the second equation by the first, we get:

b^1 = (8/32) / (1/2) = 1/4

Substituting this value of b in the first equation, we get:

a * (1/4)^1 = 32

a = 128

Therefore, the formula for the nth term is:

an = 128 * (1/4)^n

We can check this formula using the other given points:

a2 = 128 * (1/4)^2 = 8

a3 = 128 * (1/4)^3 = 2

a4 = 128 * (1/4)^4 = 0.5

So the formula holds for all the given points.

4.5y

subtract 2.9y from 7.4y, and you get 4.5y

To remove the y-term in  the given linear equation in two Variable multiply the equation by 4 then add these two equations.

The equation for a linear equation in one variable is written as ax+b = 0, where a and b are two integers, and x is a variable. This equation has only one solution. For instance, the linear equation 2x+3=8 only has one variable. As a result, this equation has a single solution, x = 5/2. Yet, there are two solutions to a linear equation with two variables.

According to given question;

5X+8y=5   ……..eqn 1.

3x-2y=3    ………eqn 2.

Multiply by 4 in the eqn 2.

We get

12x-8y=12 ……..eqn 3 .

When we add eqn 1 and eqn 3 we get ;

17x =17

X =1

To Know  more about linear equation in two Variable visit:

https://brainly.com/question/31143114

#SPJ1

After eliminating the y-term in the given equations i.e 5x+8y=5 and

3x-2y=3, The solution to the system of equations is x = 1, y = 0.

The elimination method is the technique used to solve systems of linear equations. It involves adding or subtracting equations in a system to eliminate one variable and find the value of the other variable.

To eliminate the y-term in these equations, you can multiply the second equation by 4, which will give you:

12x - 8y = 12

Now, you can add this equation to the first equation:

5x + 12x + 0y = 5 + 12

Simplifying the left side gives you 17x, and simplifying the right side gives you 17. So, you have the equation:

17x = 17

Solving for x gives you x = 1.

Now that you have found the value of x, you can substitute it into one of the original equations to solve for y. Using the first equation, you get:

5(1) + 8y = 5

Simplifying this equation gives you:

8y = 0

Solving for y gives you y = 0.

To know more about linear equations visit:

https://brainly.com/question/13738061

#SPJ1

Answer:

We can use the formula for the area of a rectangle to solve this problem. Let's assume that the length of the top of the bookcase is L and the width is b. Then, we can write:

L × b = 300

Solving for b, we get:

b = 300 / L

Since we don't know the length L, we cannot find the exact value of b. However, we can use the given information to make an estimate. Let's say that the length of the bookcase is 60 inches. Then, we have:

b = 300 / 60 = 5

So, if the length of the bookcase is 60 inches, the width needs to be at least 5 inches to accommodate Bria's soap carving collection. However, if the length is different, the required width will also be different.

The polynomial's value is Degree: 2 (because x has a maximum power of 2), Degree: 2 (since x has a maximum power of 2), and Degree: 1 (since x has a maximum power of 1).

A polynomial is an equation made up of exponents, constants, and variables that is combined using mathematical operations including addition, subtraction, multiplication, and division (No division operation by a variable).

Expanding the provided expression, we obtain: Polynomial 1

6x2 + 2x - 24x - 8 = (x-4)(6x+2) = 6x2 - 22x - 8

When we condense the phrase, we get:

3

(3x² - 11x - 4)

Level: 2

Amount of terms: 1

2nd polynomial:

(7x² + 3x) Degree: (21x2 - 12) = 7x2 + 3x - (21x2 + 12) = -14x2 + 3x + 12 2 (because the maximum power of x is 2)

Polynomial 3: 2(-10x2 + 18x + 13) + 4(5x2 + 9x + 7) = 20x2 + 36x + 28 - 20x2 + 36x + 26 = 72x + 54

Grade: 1

There is one term.

To know more about polynomial's visit:-

https://brainly.com/question/11536910

#SPJ1

The possible values of TP in isosceles triangle are between 5.5 and infinity.

Let TP = x. Then we have:

TI = TP = x (isosceles triangle)

PI = TP - PI = x - 7 (isosceles triangle)

PO = TP + OP = x + 11 (triangle inequality)

Using the fact that the sum of any two sides of a triangle must be greater than the third side, we have:

x + x > 11 --> x > 5.5

x + 11 > x --> 11 > 0

x + 7 > 5 --> x > -2

Therefore, the possible values of x are between 5.5 and infinity. The sum of all possible values of x is infinity since there is no upper bound on the possible values.

To know more about isosceles triangles:

https://brainly.com/question/2456591

#SPJ4

_____The given question is incomplete, the complete question is given below:

Suppose triangle TIP and triangle TOP are isosceles triangles. Also suppose that TI=5, PI=7, and PO=11. What is the sum of all possible lengths for TP?

Answer:

3n squared+n+2

Answer:

the nth term of the sequence is 2n² + 4T

Learn more : brainly.com/question/16054066

Step-by-step explanation:

he sequence represents a quadratic function, the nth term of the sequenceis 2n² + 4 

The nth term of a quadratic sequence is :an² + bn + c c = zeroth term ; a = second difference ÷ 2

From the sequence :First difference = 6, 10, 14, 18Second difference = 4, 4, 4

 First difference between terms in position 1 and 0 :6 - 4 = 2 

Zeroth term = First term in sequence - 2 = 6 - 2 = 4a = 4/2 = 2

Plugging the values into the equation :2n² + bn + 4 Using the 2nd term :n = 22(2)² + 2b + 4 = 128 + 2b + 4 = 12 2b = 12 - 12 2b = 0b = 0

Hence, the nth term of the sequence is 2n² + 4

Learn more : brainly.com/question/16054066

Hi!

Let's think about this really quick.

Each ring is $6. She made $132.
In order to find the solution, we need to divide the total from the original price of the ring, making the equation: 132÷6.
132÷6= 22.

So, she sold 22 rings. To verify that answer, we'll multiply 6 to 22.
6x22=132.

22 Is your answer.

Hope this helps!
Appreciated if you mark brainliest <3
~~~PicklePoppers~~~

Answer:

22 rings :)

Step-by-step explanation:

By diving 132 by 6 we can determine the number of rings she sold.

After dividing, we get 22 rings!

May I please have a brainliest? I put a lot of thought and effort into my answers, so I would really appreciate it!

Let B.C be ordered bases for R" and & the standard basis for R". Suppose T:R" R is a linear transformation. If Ic.B = Tç, e then B = E = C.

The above statement is True.

In mathematics, and more specifically in linear algebra, a linear map (also called a linear map, a linear transformation, a vector space homomorphism, or in some cases a linear function) is a map between two vector spaces V → W, which performs the conservation of operations on vectors. Addition and scalar multiplication. The same names and definitions are also used for the more general case of modules over rings; see the homomorphism of modules.

A linear map is called a linear isomorphism if it is a bijection. In the case V=W, the linear map is called linear automorphism. Sometimes the term linear operator refers to this case, but the term "linear operator" can have different meanings for different conventions: for example, it can be used to emphasize that V and W are real vector spaces (not necessarily that V = W, where V is the space of functions, which is a common convention in functional analysis.

Sometimes the term linear function has the same meaning as linear map, but not in analysis.

Learn more about Linear Transformation:

https://brainly.com/question/30822858

#SPJ4