Sketch the asymptotes of the bode magnitude plot for the following transfer function. remember to determine slopes and break points.
L(s) = 1000 (s+0.1) / s(s+1) (s+8)^2!

Answers

Answer 1

The Bode magnitude plot of L(s) has three asymptotes: a horizontal line at 20 log (1000) = 60 dB for frequencies lower than the smallest break frequency, a slope of -20 dB/decade starting at the smallest break frequency of 0.1 rad/s, and a slope of -40 dB/decade starting at the larger break frequency of 1 rad/s (due to the second-order factor (s+1)(s+8)^2).

The break frequency of 1 rad/s is also a corner frequency, where the slope changes from -20 dB/decade to -40 dB/decade. Therefore, the asymptotes of the Bode magnitude plot for L(s) are a horizontal line at 60 dB, a slope of -20 dB/decade starting at 0.1 rad/s, and a slope of -40 dB/decade starting at 1 rad/s.
To sketch the asymptotes of the Bode magnitude plot for the transfer function L(s) = 1000(s+0.1) / s(s+1)(s+8)^2, we first determine the slopes and break points.

The transfer function has three poles (s=0, s=-1, and s=-8 with a multiplicity of 2) and one zero (s=-0.1). The break points are the frequencies corresponding to these poles and zero: ω=0.1, ω=1, and ω=8. The slopes are determined by the difference in the number of poles and zeros at each break point.
At ω=0.1, the slope is +20 dB/decade (one zero); at ω=1, the slope is -20 dB/decade (one pole); and at ω=8, the slope is -40 dB/decade (two poles). Sketch the asymptotes by connecting the slopes at the break points with straight lines, creating a piecewise-linear plot.

To know more about Asymptotes visit-

https://brainly.com/question/17767511

#SPJ11


Related Questions

An inverter has a balanced 3-phase, 277/480 V output and is installed a distance, d, ft from the point of utility connection. The DC/AC converter shown below in the inverter. And the distance d is the physical separation between this DC/AC converter and the PCC. (

Answers

An expression for the voltage drop between inverter and PUC

[tex]V D \rightarrow \frac{I(\Omega / k f t) d}{2770}$[/tex]

This is further explained below.

What is an expression for the voltage drop between the inverter and PUC?

Generally, the equation for Voltage drop is  mathematically given as

[tex]V=\frac{I R}{V}[/tex]

Therefore

[tex]\%$ Voltage drop $=\frac{I R}{V} * 100\\\\$\rightarrow \frac{100 I(\Omega / 15 f t) d}{1000 V_{p}}\\\\$V_{P}=277 \mathrm{~V}$[/tex]

[tex]V D=\frac{I(\Omega / \mathrm{kft}) d}{10 * 2770} \rightarrow \frac{I(\Omega / \mathrm{kft}) d}{2770} \mathrm{~V}\\\\$\% V D \rightarrow \frac{I(\Omega / k f t) d}{2770}$[/tex]

In conclusion, the expression for the voltage drop between inverter and PUC

[tex]V D \rightarrow \frac{I(\Omega / k f t) d}{2770}$[/tex]

CQ

An inverter has a balanced 3-phase, 277/480 V output and is installed a distance, d, ft from the point of utility connection. The DC/AC converter is shown below in the inverter. And the distance d is the physical separation between this DC/AC converter and the PCC.

Derive an expression for the voltage drop between inverter and PUC in terms of d using the basic equation %VD =100IR/V.

Read more about voltage drop

https://brainly.com/question/13094809

#SPJ1

An isolation transformer whose main purpose is to reduce voltage spikes will have a turns ratio of?

Answers

Answer:

An isolation transformer whose main purpose is to reduce voltage spikes will have a turns ratio of 1 to 1.

This is due to the windings input and output having the same waveform and amplitude.

If a dielectric material, such as teflon®, is placed between the plates of a parallel-plate capacitor without altering the structure of the capacitor, how is the capacitance affected?.

Answers

The capacitance is affected is that the capacitance increases because of the insertion of Teflon.

What is capacitance?

A `is known to be a form of a device that is said to be used to save some amount of charges in any electrical circuit.

Note that the capacitor functions on the principle that the capacitance of a conductor is said to increases if an earthed conductor is  taken close to it.

Hence, The capacitance is affected is that the capacitance increases because of the insertion of Teflon.

See full question below

A dielectric material, such as Teflon®, is placed between the plates of a parallel-plate capacitor without altering the structure of the capacitor. The charge on the capacitor is held fixed. How is the electric field between the plates of the capacitor affected?

The electric field is not altered, because the structure remains unchanged.

The electric field becomes zero after the insertion of the Teflon®.

The electric field decreases because of the insertion of the Teflon®.

The electric field becomes infinite because of the insertion of the Teflon®.

The electric field increases because of the insertion of the Teflon®.

Learn more about  electric field  from

https://brainly.com/question/14781269

#SPJ1

When passing another car, make sure you maintain at least a _______ safety cushion

Answers

The answer is 4 because I just took the test!

If your crew is the first to arrive on the scene of a major mci, what will be a major aspect of your scene size-up?

Answers

If your crew is the first to arrive on the scene of a major MCL, The major aspect of your scene size-up will be to Make a sweep to determine what needs must be met. Option D. This is further explained below.

What is the scene of an MCL?

Generally, If your team is the first to arrive at the scene of a significant MCL, the most important part of your scene size-up will be to do a sweep to identify the requirements that need to be satisfied. Choose option D.

In conclusion, A medial collateral ligament (MCL) injury occurs when the ligament on the inside of the knee is stretched, partially torn, or completely ruptured. Most knee injuries are caused by an excessive amount of valgus stress on the knee, which is one of the most prevalent.

Read more about the scene of an MCL

https://brainly.com/question/13184254

#SPJ1

CQ

If your crew is the first to arrive on the scene of a major​ MCI, what will be a major aspect of your scene​ size-up?

A.

Make an initial scene report to the communications center.

B.

Control​ on-scene communication as help arrives.

C.

Prevent uncoordinated or undirected activity at the scene.

D.

Make a sweep to determine what needs must be met.

What is the mode of operation of a ramp digital voltimeter​

Answers

Answer:

The operating principle of a ramp type digital voltmeter is to measure the time that a linear ramp voltage takes to change from level of input voltage to zero voltage (or vice versa).

The advantage of using a reference line to position a building is that

Answers

Answer:

The reference line helps you achieve the precise connection of Walls for clean intersections.

Explanation:

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

The only difference between all GMA welding machines and some FCA welding machines is that all GMA welding machines must have a ______________.

Answers

Answer: Shielding gas solenoid

Explanation:

Metal wireways are sheet metal troughs with _____________ for housing and protecting electrical conductors and cable.

Answers

Answer:

Metal wireways are sheet metal "U"s with removable housing for protecting electrical equipment, wires, and cables.

Explanation:

These are especially used to run wire in manufacturing environments.

Assignment: Explain any three
ways that research can facilitate
the work of building technicians.

Answers

The three ways that research can facilitate the work of building technicians is that:

They will know the timeframe to start and complete the buildingThey will know the type and right materials to use.It will help them in the area of budgeting of equipment, tools and building materials needed.

What do building technicians do?

Building technicians are known to be people who help with some tasks around construction projects and building works.

Note that building technician overseeing a scope of tasks such as monitoring build progress and as such The three ways that research can facilitate the work of building technicians is that:

They will know the timeframe to start and complete the buildingThey will know the type and right materials to use.It will help them in the area of budgeting of equipment, tools and building materials needed.

Learn more about technicians from

https://brainly.com/question/1548867

#SPJ1

How are new slip rings attached to the rotor core during alternator rebuilding?

Answers

The new slip rings is been  attached to the rotor core during alternator rebuilding by b. Soldered on.

What is the process of Soldering ?

Soldering  is the use of Solder which is a metal alloy  consisting tin and lead and is the way of joining  different types of metals together by melting solder.

This is been used on new slip rings to get it  attached to the rotor core during alternator rebuilding .

Learn more about Soldering on:

https://brainly.com/question/25759088

#SPJ1

CHECK THE COMPLETE QUESTION BELOW:

How are new slip rings attached to the rotor core during alternator rebuilding?

a. Machine clamped

b. Soldered on

c. Crimped on

d. epoxy glue

In 2001, a land-development company launched an engineering project on land adjacent to a protected wetlands area

Answers

The statement that summarizes the data is that the population data should be collected over a much lingers period of time in order to draw a valid conclusion.

What is data?

It should be noted that data simply means the facts or statistics that are put together to get more information about a particular issue.

It should be noted that a project simony refers to an individual or collaborative enterprise which is planned in order to achieve a particular aim. In this case, the land-development company launched an engineering project on land adjacent to a protected wetlands area.

It should be noted that the time frame that the data was collected matters a lot in order to get a valid conclusion.

In this case, the statement that summarizes the data is that the population data should be collected over a much lingers period of time in order to draw a valid conclusion.

Learn more about data on:

brainly.com/question/4219149

#SPJ1

The options to the question:

a. The data Gail to represent a broad diversity of species and so do not provide enough information to adequately draw a conclusion.

b. Population data were not sampled frequently enough to draw a valid conclusion.

c. The data show stable population trends in native species providing evidence that the engineering project has no negative impact on the ecosystem.

d. The population data should be collected over a much lingers period of time in order to draw a valid conclusion.

based on the graph shown, for any given output level, the veritcal distance between the avc and the atc curves represents

Answers

A a result of the graph shown, for any given output level, the veritcal distance between the avc and the atc curves represents total fixed cost (TFC).

What is Vertical distance?

This is known as vertical separation and it is said to be the distance that exist between two vertical positions.

Note that vertical coordinates are seen for expressing vertical position: depth, and others and as such,

See full question below

The vertical distance between the ATC and AVC curve represents

a) marginal cost (MC)

b) average fixed cost (AFC)

c) total fixed cost (TFC)

d) total cost (TC) - total variable cost (TVC)

Learn more about from

https://brainly.com/question/210650

#SPJ1

The lights on your vehicle must be turned on at any time, day or night, when persons and vehicles cannot be clearly seen for ___ feet.

Answers

Answer:

500 feet

Explanation:

In order to stop or turn your vehicle around on the highway you must have 500 feet of clear road in both directions. 4. Headlights are required at any time you cannot see persons or vehicles for 500 feet, due to snow, dust, fog, etc. and from ½ after sunset to ½ before sunrise.Hope this helps

The lights on your vehicle must be turned on at any time, day or night, when persons and vehicles cannot be clearly seen for 1000 feet.

What are vehicles?

A vehicle is a piece of equipment, typically with wheels and an engine, used for land-based transportation of people or goods. Cars, buses, and trucks are examples of road vehicles. Farm vehicles include tractors.

Vehicle type refers to a group of power-driven vehicles that share all crucial aspects of their engines, cars, and OBD systems.

When a vehicle is 500 feet away, the driver must dim his headlights.

Avoid looking directly into the light when a car is coming at you; instead, slow down. At least 30 minutes before dusk, headlights must be activated. It is also important to keep in mind that a lower headlight beam improves the driver's ability to see in fog.

Thus, it should be 1000 feet distance.

For more details regarding vehicles, visit:

https://brainly.com/question/29491014

#SPJ2

Technician A says that a voltage drop on the ground side of a bulb won’t affect its brightness because the electricity has already been used up. Technician B says that a voltage drop is one way to determine if there is unwanted resistance in a circuit. Who is correct?

Answers

Answer:

  Technician B

Explanation:

For a given circuit current, the voltage drop is an indication of the resistance in the circuit.

If the voltage drop on the ground side of a bulb is unexpectedly high, it means the circuit resistance is unexpectedly high. Technician B is correct.

The displacement of a particle which moves along the s-axis is given by; = (−2 + 3)−0.5 Where s is in meters and t is in seconds. Determine the time at which the acceleration is zero.

Answers

The time at which the acceleration is zero is given as 4.66 seconds

How to solve for the time

First we have to solve for the velocity. To do this, we would have to take the derivative.

[tex]s = e^-0.5t (3 t - 2)[/tex]

Then velocity =

[tex]ds/dt = e^-0.5t (4 - 1.5 t)[/tex]

The acceleration can be gotten by finding the second derivative

[tex]a = dv/dt = e^-0.5t (.75 t - 3.5)[/tex]

To find t at acceleration = 0

We have

[tex]0 = e^-0.5t (.75t - 3.5)[/tex]

This gives t to be

t = 4.66 sec

Complete question

The displacement of a particle which moves along the s-axis isgiven by

s = (-2+3t)e^(-0.5t), where s is in meters and t is inseconds. Plot the displacement, velocity and acceleration versustime for the first 20 seconds of motion. Determine the time atwhich the acceleration is zero.

Read more on acceleration here:

https://brainly.com/question/605631

#SPJ1

P=3000W
f1=0.9
f2=0.5
A=15mm2
travel speed=?

Answers

The Travel Speed at which the welding operation can be accomplished is given as 7.147mm/s. See the computation below.

What is travel speed?

The travel speed of the welding flame or gun across the workpiece is simply measured in millimeters per minute.

Travel speed, along with voltage and amperage, is one of three factors in arc welding that affect the amount of heat input.

What is the calculation that justifies the above answer is?

We are given the following:


Melting temperature = 1650 K

k = (3.33 * 10⁻⁶) * (1,650)²

k = 9.066 J/mm^3

The formula for velocity here is given as:

V = f1 * f2 * Rh / (k*A)

V = 0.9 * 0.6 * 3000 / (9.066*25)

V = 7.147 mm/s

Hence, the Travel Speed at which the welding operation can be accomplished is given as 7.147mm/s.

Learn more about welding operation at;
https://brainly.com/question/22494632
#SPJ1

_____require(s) driving at speeds that are reasonable and prudent for conditions.

Answers

Basic speed law requires individuals driving at speeds that are reasonable and prudent for conditions.

What is Speed?

This is defined as the rate of change of the position of a body with respect to time and the unit is metre per second.

The basic speed law states that speeds which are reasonable and prudent should be adopted by drivers so as to avoid accidents and potential risks to other road users. Appropriate punishment are also meted out to defaulters in this type of scenario.

Read more about Speed laws here https://brainly.com/question/13211153

#SPJ1

Structural Safety Assessment and Traffic Control Strategies of Widened Highway Bridges under Maintenance Works Requiring Partial Lane Closure

Answers

Structural Safety Assessment and Traffic Control Strategies of Widened Highway Bridges under Maintenance Works Requiring Partial Lane Closure journal is based on the  way and techniques that can be used in maintaining  the Safety on the road as well as the Assessment of Traffic Control.

What are the techniques in controlling the traffic?

There are Devices that are typically used in the traffic control, and this can  include speed bumps as well as the barricades to block streets.

Others techniques are:

turn prohibitions stop signs raised pavement markers.

Traffic restraint can also entails the includes programs  that can foster bicycle as well as the pedestrian travel.

The rapid structural safety assessment help in inspecting and evaluating the concrete structure as well in determining  the damaged structure if it is  unsafe for personnel within the building .

Learn more about Traffic Control at:

https://brainly.com/question/26052026

#SPJ1

A handsfree device may be used if it can be activated or deactivate with a?

Answers

A handsfree device may be used if it can be activated or deactivate with a cellphone.

What is hands-free?

Handsfree is a device which when connected to a cell device can be used in listening to audio, video and messages.

A driver can also activate or deactivate with a swipe when connect to the vehicle audio device.

Therefore,

A handsfree device may be used if it can be activated or deactivate with a cellphone.

Learn more on handsfree below

https://brainly.com/question/12253610

#SPJ1

Determine the carburizing time necessary to achieve a carbon concentration of 0.30 wt.% at a position of 4 mm into an iron-carbon alloy that initially contains 0.10 wt.% C. The surface concentration is to be maintained at 0.90 wt.% C, and the treatment is to be conducted at C. Use the diffusion data for -Fe in Table 5.2

Answers

The carburizing time necessary to achieve a carbon concentration is 31.35 hours

How to find the Carburizing Time?

To determine the carburizing time necessary to achieve the given carbon concentration, we will use the equation:

(Cs - Cx)/(Cs - C0) = ERF(x/2√Dt)

where;

Cs is Concentration of carbon at surface = 0.90

Cx is Concentration of carbon at distance x = 0.30

Distance x = 4 mm = 0.004 m

C0 is Initial concentration of carbon = 0.10

ERF() = Error function at the given value

D = Diffusion of Carbon into steel

t = Time necessary to achieve given carbon concentration ,

Thus, plugging in the relevant values gives;

(Cs - Cx)/(Cs - C0) = (0.9 - 0.3)/(0.9 - 0.1)

= 0.6/0.8 = 0.75

now, ERF(z) = 0.75 and as such using ERF table, we can say that;

Z = 0.814. Thus;

(x/2√Dt) = 0.81

Using the table of diffusion data, we have;

At a temperature of  (1100°C) or 1373 K, we have;

D = 5.35 × 10⁻¹¹ m²/sec.

Calculating the carbonizing time by using the equation z = (x/2√Dt);

where;

t is carbonizing time

Thus;

0.814 = (0.004/(2 × √5.35 × 10⁻¹¹ × √t))

0.814 = 0.004 /(1.4628 × 10⁻⁵ × √t)

0.814 × 1.4628 × 10⁻⁵ × √t = 0.004

1.19072 × 10⁻⁵ × √t = 0.004  

√t = 0.004/(1.19072 × 10⁻⁵)

√t = 335.93

t = 112848.96 seconds

Converting to hours gives;

t = 112848.96/3600

t = 31.35 hours

Therefore, the carburizing time necessary to achieve a carbon concentration is 31.35 hours

Read more about Carburizing Time at; https://brainly.com/question/13031810

#SPJ1

To put out a class D metal fire, you must _______ the fire.

Answers

To put out a class D metal fire, you must smother the fire and eliminate the oxygen element in the fire.

What is a Class D fire?

A class D fire is a type of fire that cannot be extinguished by water. This is because adding water to it reacts with other elements in the fire intensifying the fire even more.

Smothering in this context involves adding a solution like carbon dioxide (CO2) into the fire, this results in a reduction of oxygen in the atmosphere surrounding the class D fire.

By so doing, smothering the fire eliminates the oxygen element in the fire, thereby extinguishing the fire.

You can learn more about extinguishing fires here https://brainly.in/question/760550

#SPJ1

If extension done in a stork position, during backward bending in a standing position of a special test for lumbar spine, produces pain in the lumbar or sacral regions of the spine, it may indicate _____.

Answers

The answer is 7 because I just took the test!

what is the basic concept of the finite element method.​

Answers

Answer:

The FEM is a general numerical method for solving partial differential equations in two or three space variables (i.e., some boundary value problems). To solve a problem, the FEM subdivides a large system into smaller, simpler parts that are called finite elements.

An important difference between expressways and freeways is that expressways feature intersections, whereas freeways use: a) interchanges b) medians c) rumble strips d) green guide signs

Answers

An important difference between expressways and freeways is that expressways feature intersections, whereas freeways use a) interchanges.

Which load balancing method is supported in equal cost multipath (ECMP) load balancing when SD-WAN is enabled

Answers

Volume load balancing method is supported in equal cost multipath (ECMP) load balancing when SD-WAN is enabled.

What is load balancing method?

Load balancing means are regarded as a form of an algorithms or method that is used to rightly share an incoming server request or traffic in the midst or among servers that is from the server pool.

Note that Volume load balancing method is supported in equal cost multipath (ECMP) load balancing when SD-WAN is enabled as that is its role.

Learn more about Volume load balancing from

https://brainly.com/question/28021339

#SPJ1

Through Engineering, human achievement continues to advance. Write about your favorite example of engineering in action and what impresses you about it from an Engineering standpoint.

Answers

Hydroelectric power plants are outstanding engineering devices that allow people to obtain energy from renewable sources.

What is a hydroelectric power plant?

A hydroelectric power plant is a center for the production of electricity based on hydropower energy systems.

Hydroelectric power plants exploit the energy of water masses (e.g., a stream) to produce clean energy for million of people around the world.

These plants have generators capable of converting mechanical energy  into electricity by using simple turbines.

In conclusion, hydroelectric power plants are outstanding engineering devices that allow people to obtain energy from renewable sources.

Learn more about Hydroelectric power plants here:

https://brainly.com/question/8934285

#SPJ1

A light weight vehicle traveling 50 mph can stop in approximately
a. 200 meters.
b. 5 blocks.
c. 200 feet.
d. 6 seconds.

Answers

A light weight vehicle traveling 50 mph can stop in approximately 200 feet.

How a car break works?

The break system of a car is composed by several items that are always working together to slow down and bring a vehicle to a complete stop. It also has the function of keeping the car stationary when it is parked. In general, this system has two manual activation modes: the lever and the pedal, with the exception of vehicles adapted for people with disabilities.

Most vehicles today use the disc brake system. Disc brakes work by using pads, which are held inside a hydraulic caliper, receiving pressure to brake. Such pads generate friction on a disc, which makes the vehicle stop permanently.

The drum brake is another type, being older and dependent on the famous linings to cause friction in the wheel and stop the vehicle. A hydraulic cylinder makes the plies move inside the drum, which is a hollow part fastened with screws and attached to the wheels. This type of brake is on the rear wheels, for the most common models.

See more about engineering at: brainly.com/question/19117846

#SPJ1

Write a class having two private variables and one-member function which will return the area of the rectangle.

Answers

Using the knowledge in computational language in C++ it is possible to write the code being write a class having two private variables

Writting the code in C++:

#include <iostream>

using namespace std;

class Rectangle { /*create a class named Rectangle*/

  private:

  float l,b; /*this class has two private variables l and b*/

  public:

  float getArea(float l, float b) /*this class has one member-function getArea which returns the area of the rectangle*/

  {

   return l*b; /*return the area of the rectangle*/

  }

};

int main () { /*the main function to check the working of our Rectangle class*/

 float l,b;

 Rectangle r1; /*create an object r1 of Rectangle class*/

 cout<<"Enter the length of the rectangle: ";

 cin>>l; /*input the length of the rectangle from the user*/

 cout<<"Enter the breadth of the rectangle: ";

 cin>>b; /*input the breadth of the rectangle from the user*/

 cout <<"Area of the rectangle is: "<< r1.getArea(l,b)<<" square units."; /*find the area of the rectangle using the member function of the class*/

 return 0;

}

See more about C++ at brainly.com/question/19705654

#SPJ1

a. Calculate the equivalent resistance of the circuit

Answers

Answer:

no any think photo.

Explanation:

Other Questions
Is the answer A, B, C, or D on the theme of Jason Reynolds First Day Fly? How has the Covid-19 pandemic affected the job market? Select two pieces of evidence from "One Word of Advice" that support the correct answer to question 2. Check the boxes of your two choices How can both the JIT and EOQ inventory theories effectively be reconciled? a) They can't. A firm must choose either one or the other. b) by using MRP c) by considering the setup cost as a variable instead of a parameter d) by applying Kanban cards to the EOQ system e) by assuming a finite production rate consider the following system. dx dt = x y z dy dt = 5y dz dt = y z find the eigenvalues of the coefficient matrix a(t). (enter your answers as a comma-separated list.) Roys Toys is a manufacturer of toys and childrens products. The following are selected items appearing in a recent balance sheet.Cash and short-term investments$47.3Receivables159.7Inventories72.3Prepaid expenses and other current assets32.0Total current liabilities130.1Total liabilities279.4Total stockholders' equity344.0Dollar amounts stated above are in millions.a-1. Using the information above, compute the amounts of Roy's Toys quick assets. (Enter your answer in millions of dollars rounded to 1 decimal place.)a-2. Using the information above, compute the amounts of Roy's Toys total current assets. (Enter your answer in millions of dollars rounded to 1 decimal place.)b-1. Compute for Roy's Toys quick ratio. (Round your answer to 1 decimal place.)b-2. Compute for Roy's Toys current ratio. (Round your answer to 1 decimal place.)b-3. Compute for Roy's Toys dollar amount of working capital. (Enter your answer in millions of dollars rounded to 1 decimal place.) give the cmos realization for the boolean function y = ab cde Why were there always people staying at Malala's house? the manner in which decisions are made and work is performed within the organization is known as the firms the patient self-determination act of 1991 is a set of federal requirements intended to implement advanced directive policies at all ______ which of the following is an additional element that has to be proved in a case of voluntary manslaughter? there are 8 members of a club. you must select a president, vice president, secretary, and a treasurer. how many ways can you select the officers? a satellite with high spatial resolution is likely to have a high temporal resolution, because its swath is narrow. true or false The molar solubility of Ba3(PO4)2 in water at 25C is 1.4x10^(-8) mol / L. What is the value of Ksp for this salt?Ksp= .... An operating system can be organized in a layered, hierarchical structure, where the inner most layers ________.a) host the kernel.b) hold the microkernel.c) are visible to the user.d) interact with the hardware. the probability rolling a single six-sided die and getting a prime number (2, 3, or 5) is enter your response here. (type an integer or a simplified fraction.) Select the correct interpretation of the 95% confidence interval for Preston's analysis. a range of values developed by a method such that 95% of the confidence intervals produced by the same method contain the mean mid-term test score for the population of students that study for 6 hrs_ a range of values constructed such that there is 95% confidence that the mid-term test score for randomly selected high schoool student who studies for 6 hrs lies within that range_ range of values such that the probability is 95% that the predicted mean mid-term test score for students who study 6 hrs is in that range a range of values that captures the mid-term test scores of 95% of the students in the population when the amount of time spent studying is 6 hrs_ range of values such that the probability is 95% that the mean mid-term test score for the population of students who study for 6 hrs is in that range FILL IN THE BLANK mediators seek to establish _____ agreements that reconcile both parties' interests to their mutual benefit. Sedimentary rock turns into metamorphic rock trough which prosses Which sentence uses numbers correctly?a. -I have 6 more days until promotion.b. -I have six more days until promotion.