Solve this question please sqdancefan​

Answer:

Also, as stream depth increases, the hydraulic radius increases thereby making the stream more free flowing. Both of these factors lead to an increase in stream velocity. The increased velocity and the increased cross-sectional area mean that discharge increases.

Answer:

Jupiter and neptune

Explanation:

Answer:

Significant

Explanation:

As the word suggests, significant figures or digits are numbers that are valid in measurement.

Answer:

SIGNIFICANT DIGITS

Explanation:

MARK ME BRAINLIEST PLZZZ

Answer:

7.5 J

Explanation:

To answer the question given above, we need to determine the energy that will bring about the speed of 1 m/s. This can be obtained as follow:

Mass (m) = 15 Kg

Velocity (v) = 1 m/s

Energy (E) =?

E = ½mv²

E = ½ × 15 × 1²

E = ½ × 15 × 1

E = ½ × 15

E = 7.5 J

Therefore, to change the speed to 1 m/s, the employee must do a work of 7.5 J.

Answer:

a. V₂ = 6 V

b. 360 joules

c. The positive terminals of both the voltmeter and ammeter are connected to the positive terminal of the power source

Please see the attached drawing created with MS Visio

Explanation:

a. The voltmeter readings are;

V₁ = 12 V, V = 18 V

Given that the voltage reading, 'V', is the voltage reading across two loads with voltages, V₁ and V₂ connected in series, we have;

V = V₁ + V₂

V₂ = V - V₁

V₂ = 18 V - 12 V = 6 V

b. The reading of the ammeter, A, I = 0.5 A

The heat energy, Q  = I·V·t

Where;

t = The time = 1 minute (60 seconds)

Therefore, for the lamp L₁, where V = 12 V, we have;

Q₁ = 0.5 A × 12 V × 60 s = 360 Joules

The amount of electrical energy changed into heat and light in lamp L₁, Q₁ = 360 joules

c. The positive terminals of the voltmeter and ammeter are connected to the positive terminal of the power source

Please see attached drawing created with MS Visio

Answer:

power per square meter = 4.593 × 10^(6) W/m²

Wavelength of peak intensity = 9.67 × 10^(-7) m

Explanation:

From Stefan-Boltzmann law, total emitted power per square meter is given as;

P/A = eσT⁴

where;

P is power

A is surface area

σ = Stefan-Boltzmann constant = 5.67 × 10^(-8) W/m².k⁴

T = temperature of the body = 3000 K

e = emissivity of the substance (for ideal radiation, it has a value = 1)

Thus, Plugging in the relevant values we have;

P/A = 1 × 5.67 × 10^(-8) × (3000)^(4)

P/A = 4.593 × 10^(6) W/m²

Let's find the wavelength of peak intensity.

From wiens displacement law, we know that;

λ_m × T = b

where;

λ_m = maximum wavelength

T = Temperature

b is Wien's displacement constant = 2.9 × 10^(−3) m/K

thus;

λ_m = b/T = (2.9 × 10^(−3))/3000 = 9.67 × 10^(-7) m

Answer:

acceleration is the vector quantity because it depends on particular direction and has magnitude

Answer:

gadjgdasgdghgsdgd

Explanation:sorry need answer

Answer:

V * t = cm/sec * sec = cm

V * t should give distance as a result  -  

The other three fit the fundamental equations

Answer: The change in momentum is +20 kg.m/s

Explanation:

To calculate the final velocity of object, we use the first equation of motion:

[tex]v=u+at[/tex]

where,

v = final velocity

u = initial velocity = 0 m/s

a = acceleration = [tex]10m/s^2[/tex]

t = time = 0.5 s

Putting values in above equation, we get:

[tex]v=0+(10\times 0.5)\\\\v=5m/s[/tex]

Momentum is defined as the product of the mass and velocity of an object. It is given by the equation:

[tex]p=mv[/tex]

where,

p = momentum

m = mass of object = 2 kg

Let the upward velocity be positive and the downward velocity be negative

When the object is dropped, the velocity is downward

v = -5m/s

Initial momentum = [tex]2kg\times (-5m/s)=-10kg.m/s[/tex]

When the object is bounced back, the velocity is upward

v = +5m/s

Final momentum = [tex]2kg\times (+5m/s)=10kg.m/s[/tex]

Change in momentum = Final - Inital

Change in momentum = [10 - (-10)] = +20 kg.m/s

Hence, the change in momentum is +20 kg.m/s

Answer:

1.1 m/s

Explanation:

Applying,

v = u+at.............. Equation 1

Where v = final velocity, u = initial velocity, a = acceleration, t = time.

From the question,

Given: u = 0.3 ms, a = 0.4 m/s², t = 2 seconds

Substitute these values into equation 1

v = 0.3+0.4(2)

v = 0.3+0.8

v = 1.1 m/s

Hence the velocity at the end of 2 seconds is 1.1 m/s

Answer:

The 80 mph car

Because the formula says 1/2 mass but for the velocity it is squared

By Newton's second law, the net force acting on the crate parallel to the surface is

∑ F = mg sin(10°) - 800 N = ma

where m = 500 kg is the mass of the crate and a is the acceleration.

Solve for a :

a = ((500 kg) (9.80 m/s^2) sin(10°) - 800 N) / (500 kg)

a ≈ 0.102 m/s^2

Explanation:

The difference of electrical potential between two points is called the potential difference.

It is also defined as the work done in the transfer of a unit quantity of electricity from one point to the other.

The SI unit of electric potential is volt. It is denoted by V.

Answer:

In a series circuit, how does the voltage supplied by the battery compare to the voltage on each load? The voltage of the battery is equal to the voltage of each load added together. ... The voltage across the two resistors must both have the same voltage of the battery.

Explanation:

mark me as BRAINLIEST

follow me

carry on learning

Answer:

The voltage of the battery is equal to the voltage of each load added together. The voltage across the two resistors must both have the same voltage of the battery.

>3

Explanation:

area=length(m) ×breadth(m) . The unit of area is expressed in terms of fundamental units m^2.thus it is derived unit

Answer:

Fan speed

Explanation:

because is the dependent variable

Explanation:

Lets say you have a ball in your hand, you raise your hand to just above your head. Now, when you did that you created potential energy that is ready to be released. you drop the ball and the ball bounces a few times off the ground. Now lets say you got a ladder and doubled the ball's height doubling the energy now stored in the ball, when you drop it the ball should bounce much higher after hitting the ground as a result of more energy being released.

Hope this helped.

Answer:

there it is fella atleast i tried

Answer:

B

Explanation:

Calculate the kinetic energy before and after they hold hands. Then, to find the change in kinetic energy simply subtract the final KE by initial KE.

Answer:

a. Time = 3.6 seconds

b. Time = 4.4 seconds

Explanation:

Given the following data;

Distance = 180 m

Speed = 50 m/s

a. To find the time;

Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.

Mathematically, speed is given by the formula;

[tex]Speed = \frac{distance}{time}[/tex]

Making time the subject of formula, we have;

[tex]Time = \frac{distance}{speed}[/tex]

Substituting into the equation, we have;

[tex]Time = \frac{180}{50}[/tex]

Time = 3.6 seconds

b. Distance = 220 meters

Speed = 50 m/s

To find the time;

[tex]Time = \frac{distance}{speed}[/tex]

Substituting into the equation, we have;

[tex]Time = \frac{220}{50}[/tex]

Time = 4.4 seconds

Answer:

Netball is a ball sport for two teams of seven players it's rules are published in print and online by the international netball federation Games are played on a rectangular court divided into thirds with a raised goal at coach short end

Explanation:

It will help you

Answer:

Ionosphere

Explanation:

The thermosphere reaches 600 kilometres just above mesosphere and begins immediately above the mesosphere. This layer is where the aurora and satellites appear.

The ionosphere is the comprehensive career of the mesosphere because most of the thermosphere, located 80–400 kilometres just above ground atmosphere.

Auroras — magnificent flowing streaks of light seen in the night sky – appear in this location.

Answer:

h = 1/2gt^2

Is the formula for the height of a free falling object.

Put in the numbers:

h = 1/2*9.8 (gravitational constant) * 10^2

h=490 meters.

Please note that the gravitational constant is approximate, you could also use a more specific value or 10

Answer:

Mechanical advantage is the measure of the force amplification achieved by using a tool , mechanical device or machine . The machine preserve the input power and supply trade off force. against movement to obtain a desired amplification in the output force .

Answer:

The ratio of load overcome by the machine to the effort applied is called mechanical advantage.

Step-by-step explanation:

V = 2,143. 6 cm³ (rounded to one-decimal place) is the volume of a ball that has a radius of 8 cm.

Answer:

2143.57 cm^3

Explanation:

volume of a ball = 4/3 *π*r^3

= [tex]\frac{4}{3} *3.14 *8^{3}[/tex]

=[tex]\frac{4*3.14}{3} *512[/tex]

[tex]\frac{12.56}{3} *512[/tex]

=[tex]\frac{12.56*512}{3}[/tex]

=[tex]\frac{6430.72}{3}[/tex]

=2143.57

Answer:

-50.6 kJ

Explanation:

The work done (W) on an object is given by:

W = (Fcosθ) * S

where F is the force, S is the displacement and θ is the angle between the force and displacement.

i) During the first trip riding east, S₁ = 2.93 km = 2930 m, F₁ = 8.65 N.

The displacement is due east and the force is due west, hence θ₁ = 180°. Therefore:

W₁ = (F₁ * cosθ₁)S₁ = (8,65 * cos(180))2930 = -25.3 kJ

ii) i) During the second trip riding west, S₂ = 2.93 km = 2930 m, F₂ = 8.65 N.

The displacement is due west and the force is due east, hence θ₂ = 180°. Therefore:

W₂ = (F₂ * cosθ₂)S₂ = (8,65 * cos(180))2930 = -25.3 kJ

work done by the resistive force during the round trip is:

W = W₁ + W₂ = -25.3 kJ + (-25.3 kJ) = -50.6 kJ