Study the following data set.

{8,15,9,18,9,17,22,10,11,9,13}

What is the quarterfinal range of the data set?

If there were only 5 coin tosses, the answer would be p5, where p= 0.6.

Now,

18 - 5 + 1 = 14 consecutive sequences of 5 flips contained in 18 flips. So it's tempting to say the answer is 14p5 ≈ 1.08, but it's also wrong. This is actually the number of expected 5-sticks, not the probability of at least one 5-stick. The problem is that since these sequences overlap, the events are not mutually exclusive, so we cannot sum them to get the overall probability. We have to subtract out all the possibilities of generating multiple 5 streaks, but calculating that probability is very complicated.

This post on stack swapping suggests an elegant approach that can be adapted to this problem. Let's define a sequence P(n). where P(n) is the probability of at least one consecutive heads after a total of n rollovers. So the answer of the question is P(18).

Clearly, P(0) = P(1) = P(2) = P(3) = P(4) = 0. This is because he can't get 5 heads in a row unless he flips the coin 5 times. P(5) is easy to compute, it only happens if all 5 flips are heads, so P(5) = p5 = 2433125 = 0.07776 .

Well, the length of the discontinuous part is n - 6, so the probability is

(1 −P(n−6)). The T,H,H,H,H,H part is the probability (1−p)p5 =(0,4)(0,6)5, and since these are independent events, the probability of THHHHH [not consecutive first letters] is (1−P( n −6))( 1−p) p5 .

Putting, All together:

P(n) = P(n−1) + (1−P(n−6))(1−p) p5.

Learn more about coin tosses:

https://brainly.com/question/13384135

#SPJ4

The situation below that has a positive rate of change between variables: "The height of a building increases by 10 feet for every story added".

A positive rate of change indicates that the amount under consideration is rising over time, whereas a negative rate of change indicates that it is declining with time. Change rates can be positive or negative. This corresponds to a change in the y -value between the two data points. The term zero rate of change refers to a quantity that does not fluctuate over time. An growing function's average rate of change is positive, whereas a declining function's average rate of change is negative.

Here,

The case below that exhibits a positive rate of change between variables: "The height of a building grows by 10 feet for every floor added".

To know more about positive rate of change,

https://brainly.com/question/29103286

#SPJ1

The length of Nathan's cat will be √27 inches.

Logic is the manipulation of all those concepts, whereas algebra is the study of abstract symbols.

Parenthesis, Exponent, Multiplication, Division, Addition, and Subtraction are all referred to by the abbreviation PEMDAS. This strategy is utilized to provide an accurate and comprehensive solution to the issue.

A number is referred to as rational if the value of a numerical expression terminates, in which case it is a rational number, and irrational if the value of the expression does not terminate.

5/2, 1/3, 45, 59, 144, and so forth are examples of rational numbers.

The irrational numbers include, e,√27, and so forth.

Nathan's cat will be about √27 inches long.

More about the Algebra link is given below.

brainly.com/question/953809

#SPJ4

The second equation with a slope of 1 passing through (1, 4) is y = x + 3

An equation is an expression relating two or more numbers and variables.

The standard form of an equation is:

y = mx + b

Where m is the rate of change(slope) and b is the y intercept.

The first equation:

y = -4x + 8

Both equations intersect at a point with y -coordinate 4. Hence the corresponding x coordinate is by substituting y= 4:

4 = -4x + 8

-4x = -4

x = 1

The point is (1, 4)

The second equation has a slope of 1 and intersect at (1, 4). Hence:

y - 4 = 1(x - 1)

y = x + 3

The second equation is y = x + 3

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

Answer: the answer is B

Step-by-step explanation:

Answer:b

Step-by-step explanation:

Seven years ago the sum of their ages was 31:  

               (L - 7) + (M - 7)  =  31

Given that:

Lindsay is 5 years younger than Mark. Seven years ago, the sum of their ages was 31.

let L be Lindsay's age and let m be Mark's age.

​L −7 = (M−7) + 5

⇒ L + M = 31

⇒ ​L = M + 5

⇒ (L−7) + (M−7) = 31

Now,

​L−7 = (M−7) − 5

⇒ L + M = 31

Now, as we know that:

Lindsay is 5 years younger than Mark.

Therefore,

​L = m −5

And,

Seven years ago the sum of their ages was 31:  

(L−7) + (m−7)  =31

Learn more about Sum:

https://brainly.com/question/29034036

#SPJ4

The value of A when x - 5 is a factor of x³ - 3x² + ax - 10 is -8.

A polynomial factor is a polynomial that divides another polynomial exactly, with no remainder.

For example, if we have a polynomial P(x) = x³ - 3x² + ax - 10, and we have a polynomial factor F(x) = x - 5, we can say that P(x) is divisible by F(x) with no remainder.

In general, a polynomial of degree n has n roots (or zeroes) and the factorization of polynomial can be expressed as a product of its roots and its corresponding multiplicity.

To find the value of A, set x = 5 in the equation x³ - 3x² + ax - 10 and solve for A that will make the equation equal to zero..

So when x = 5, we have:

x³ - 3x² + ax - 10 = 0

(5)³ - 3(5)² + a(5) - 10 = 0

125 - 75 + 5a - 10 = 0

5a = -40

a = -8

Hence, if x - 5 is a factor of x³ - 3x² + ax - 10, then A is equal to -8.

Learn more about polynomial factor here: brainly.com/question/30090287

#SPJ4

The point_dist with the distance between point (x1, y1) and point (x2, y2): point_dist = math.sqrt((x2 – x1) ** 2.0 + (y2 – y1) ** 2.0).

The program is the illustration of functions. Functions are the collections of defined program statements, which are executed when they are evoked.

In this case, the program in Python, in which comments are used to explain each line is as follows:

#This imports the math module

import math

#This defines the function

def calculate distance (x1, y1, x2, y2):

#This calculates the distance between the point_dist

point_dist = math.sqrt((x2 – x1) ** 2.0 + (y2 – y1) ** 2.0)

#This returns the calculated distance

return dist distance

Learn more about Python functions at: brainly.com/question/14284563

#SPJ4

Although part of your question is missing, you might be referring to this full question: Assign point_dist with the distance between point (x1, y1) and point (x2, y2). The calculation is: Distance = SquareRootOf( (x2 - x1)2 + (y2 - y1)2 ). Sample output with inputs: 1.0 2.0 1.0 5.0. Points distance: 3.0.

The solution is the set of all points (x,y) that satisfy the inequalities:

y < 2x + 4,  y < x/4 - 3, x + 3 = y, and 2x - 6 + 2 = y.

What is the graph of a function?

The graph of a function is a visual representation of the relationship between the input values (x-coordinates) and the output values (y-coordinates) of the function. In other words, it is a visual representation of the function's rule.

The graph of a function can take many different forms, depending on the function's rule. Linear functions, for example, will produce a straight line on the graph.

i) 2y - 4x < 8 can be solved by adding 4x to both sides and then dividing by 2, giving:

y < 2x + 4.

ii) -4y > -x + 12 can be solved by adding x to both sides and then dividing by -4, giving: y < x/4 - 3.

iii) | x + 3 | = y, you can split this into two cases:

i. x + 3 = y

ii. -(x + 3) = y

iv) |2x – 6| + 2 = y, you can split this into two cases:

i. 2x - 6 + 2 = y

ii. -(2x - 6) + 2 = y

We can use these equations to plot the graph on a coordinate plane.

Hence, the solution is the set of all points (x,y) that satisfy the inequalities:

y < 2x + 4,  y < x/4 - 3, x + 3 = y, and 2x - 6 + 2 = y.

To learn more about the graph of a function visit,

brainly.com/question/25950034

#SPJ1

960 woods

Step-by-step explanation:

lxbxh=12×8×10=960

When the capacity and radius are stated as 37.68 cubic inches and 1.5 inches, respectively, the height of the soup can is 5.34 inches.

It is also known as the object's capacity. The fundamental equation for volume is length, width, and height, as opposed to the fundamental equation for the area of a rectangular shape, which is length, breadth, and height. The math is the same regardless of how you refer to the different dimensions. For example, you can substitute "depth" for "height." Volume is used to describe an object's capacity.Volume can also be used to describe how much space a three-dimensional object occupies.

given

volume of a can of soup = 37 .68 cubic inches

length of radius = 1.5 inches

v = 37 .68 cubic inches

r = 1.5 inches

v = [tex]\pi r^{2} h[/tex]

37.68 = 7.06 * h

h = 5.34 inches

When the capacity and radius are stated as 37.68 cubic inches and 1.5 inches, respectively, the height of the soup can is 5.34 inches.

To know more about volume visit :-

https://brainly.com/question/1578538

#SPJ1

Answer:

So the solution is x = -0.57 and y = 30/7.

Step By Step Explanation:

To solve a system of linear equations, such as "x = 8 - 2y" and "3x + y = 6", we can use substitution or elimination method.

Using substitution method:

solve one equation for one variable

substitute the expression obtained in step 1 into the second equation

solve the equation obtained in step 2 to find the value of the variable that was solved for

substitute this value back into the first equation to find the value of the other variable.

x = 8 - 2y;

3x + y = 6;

solve for x in the first equation

x = 8 - 2y

substitute the value of x in the second equation

3(8-2y) + y = 6

solve the second equation obtained for y

24 - 6y + y = 6

25 - 6y = 6

-6y = -19

y = 19/6

substitute the value of y back in the first equation

x = 8 - 2(19/6) = 8 - (38/6) = 8 - (63/6) = 8 - (63/6) = 8 - 10.5 = -2.5

So the solution is x = -2.5 and y = 19/6

Alternatively, using elimination method:

Add or subtract one equation from the other to eliminate one of the variables.

Solve the resulting equation for the remaining variable.

Substitute this value into either of the original equations to find the value of the eliminated variable.

Multiply the first equation by -3

-3x = -24 + 6y;

Add the above equation to the second equation

-3x + y = 6

-24 + 6y + y = 6

-24 + 7y = 6

7y = 30

y = 30/7

substitute the value of y into the first equation

x = 8 - 2(30/7) = 8 - (60/7) = 8 - (60/7) = 8 - 8.57 = -0.57

So the solution is x = -0.57 and y = 30/7.

The sum of the measures of the interior angles of a quadrilateral is 360°. The sum of the measures of the exterior angles of a quadrilateral is 360°.

What is a quadrilateral?

A quadrilateral is a closed shape that has four sides, four vertices, and four angles. It's made by connecting four non-collinear points. The sum of quadrilateral interior angles is always 360 degrees.

Assume that ABCD is a quadrilateral.

The sum of the interior angle and the corresponding exterior angle is 180°.

The exterior angle of A is E. The exterior angle of B is F. The exterior angle of C is G. The exterior angle of D is H.

Thus ∠A + ∠E = 180°  .....(i)

∠B + ∠F = 180°  ......(ii)

∠C + ∠G = 180° ......(iii)

∠D + ∠H = 180° ......(iv)

Add equations (i), (ii), (iii), (iv):

∠A + ∠E + ∠B + ∠F + ∠C + ∠G +  ∠D + ∠H = 180°+180°+180°+180°

(∠A+∠B + ∠C +∠D) + ∠E +∠F +  ∠G + ∠H = 720°

The sum of all interior angles of quadrilateral is ∠A+∠B + ∠C +∠D = 360°.

360°+  ∠E +∠F +  ∠G + ∠H = 720°

∠E +∠F +  ∠G + ∠H = 720° - 360°

∠E +∠F +  ∠G + ∠H =  360°

To learn more about the interior angle, click on the below link:

https://brainly.com/question/29150482

#SPJ1

Therefore , the solution of the given problem of  proportionality relationship comes out to be  it is not proportional relationship.

Relationships are regarded to as proportional when they continuously have the same ratio. For instance, the number of trees in an airport and the number of apples in a harvesting of apples depend on the average number of apples produced by each tree. A linear relation between two number or variables is referred to as being proportional in mathematics. If the initial quantity doubles, the other amount also does so. Whenever one of the parameters is reduced to 1/100th of the its previous value, the other decreases as well.

Here,

Given :

x= 1 , y=6

x=2,y=12

So , the equation is :

=> y =2x

The proportional relationship says that the line of the given equation passes through origin ,

=> y =2x

=> y = 2(0)

=> 0 =0

Thus , x =0 and y=0  because this line  pass through origin it is proportional relationship.

Therefore , the solution of the given problem of  proportional relationship comes out to be  it is not proportional relationship.

To know more about proportionality visit:

brainly.com/question/29126727

#SPJ1

Answer: 50x8 = 400 ✅

Step-by-step explanation:

To solve the equation 50x8=, you are supposed to multiply 50 by 8. (or add 50 8 times)

You can perform the multiplication by using mental math, a calculator or a pencil and paper.

So 50 multiplied by 8 equals to 400.

Where k is an integer, the range of potential values for x is between 90 and 45.

Integers can be zero, a calculation that shows, or a minus integer signified by a minus sign. An additive inverse of a positive integer that it relates to is a negative number. A group of integers is usually denoted in mathematical notation by a bold Z or even a bold "mathbb Z." An integer is a positive, negative, and zero number that is not a fraction (pronounced IN-tuh-jer).  Non-integer examples include the numerals 1.43, 1 3/4, 3.14, and more. A collection containing integers and their southern hemisphere is known as an integer set. Fractions and decimals are not included in the integer set.

given

a)  π/2 + k *  π =

= k = 90

b)  π/6 + k· 2π =

k = 45

Where k is an integer, the range of potential values for x is between 90 and 45.

To know more about integer visit:

https://brainly.com/question/15276410

#SPJ1

The three different categories of problem-solving techniques are.

A problem must be defined, its cause identified, potential solutions located, ranked and selected, and then those solutions must be implemented. the steps taken to resolve problems.

Clarifying:

Ideating:

Developing:

To know more about the problem-solving, here

brainly.com/question/30198539

#SPJ4

6

if youadd 9 tot he thing you get the answr

Answer:

729

Step-by-step explanation:

3x3x3=27

27x27=729

Answer:

[tex](3^3)^{2}[/tex] = [tex]729[/tex]

Step-by-step explanation:

To solve this problem, you need to utilize this exponent property:

[tex](a^n)^m = a^{n*m}[/tex]

In this problem,

a = 3

n = 3

m = 2

Substitute these values into the property and compute.

∴ [tex](a^n)^m = a^{n*m}\\(3^3)^2 = 3^{3*2}\\(3^3)^2 = 3^6\\(3^3)^2 = 729[/tex]

mark brainliest please :)

The common ratio is 18/23.

What is the geometric sequence?

A geometric sequence is a sequence of numbers where each term is found by multiplying the previous term by a fixed number, called the common ratio. To find the common ratio of a geometric sequence, we can divide each term by the previous term.

It's important to note that in a geometric sequence, the quotient of any two consecutive terms is always constant and that is the common ratio.

A geometric sequence is a sequence in which each term is found by multiplying the preceding term by the same value. Its general term is.

aₙ= a₁ rⁿ⁻1. The value r is called the common ratio. It is found by taking any term in the sequence and dividing it by its preceding term.

Given the geometric sequence: 28, 23, 18

We can find the common ratio by dividing each term by the previous term:

r = 23/28 = 18/23

Therefore, the common ratio is 18/23.

To learn more about the geometric sequence visit,

https://brainly.com/question/24643676

#SPJ1

option A The inequity x ≥   3 indicates how many days it will take Rebecca to finish her orders.

An inequality in mathematics is a relationship between two expressions or values that is not equal. Thus, imbalance leads to inequality. An inequality creates the link between two values that are not equal in mathematics. Egality is distinct from inequality. When two values are not equal, most commonly use the not equal symbol (). Different inequalities are used to contrast values, no matter how small or large. Many simple inequalities can be resolved by modifying the two sides until the variables are all that remain. But a number of things contribute to inequality: Negative values on both sides are divided or added. Trade off the left and right.

given

180x3=540 is the value.

0x3=0 3x8 =24

Add 1+2 tens and the tens on top of the one to obtain 540.

so option A The inequity x ≥   3 indicates how many days it will take Rebecca to finish her orders.

To know more about inequality visit:

https://brainly.com/question/29914203

#SPJ1

The correct equation to find the amount, in dollars, x, of check 353 is:

D. 1,460.89 +25.79+ x = 1,536.71

This equation shows that the sum of check 354, check 353, and the known total of 1,460.89 is equal to the corrected total of 1,536.71. So by solving for x, you can find the amount of check 353.

To solve for x, you would subtract 25.79 and 1,460.89 from both sides of the equation:

x = 1,536.71 - 1,460.89 - 25.79

x = 50.03

So the amount of check 353 is $50.03

It is important to notice that option A and B doesn't include the missing check 354, and option C doesn't add the missing check 354 and the corrected total, so option D is the right one.

Read more on equations here: https://brainly.com/question/2972832

#SPJ1

Step-by-step explanation:

PLEASEEEE GIVE BRANLIEST

Answer:

60+15+20+21+20+30+45= *212*

Answer:

Step-by-step explanation:

2.25

In 1 hour one cycle and 1/4th of the second cycle can be assembled. or 1.25 cycles can be assembled.

The division is a mathematical operation among the 4 fundamental mathematical operations. It is the process of dividing a group of items into smaller groups and used for equal distribution.

Divisions are used very often in our daily life like dividing food items, dividing money for people calculating averages, etc.      

Here we have

John was able to assemble 10 bicycles in 8 hours.  

Given that he is consistently assembling each bicycle  

To find the number of cycles that can be assembled in 1 hr

Divide given number of cycles by the given time  

Number cycles can be assembled = 10/8 = 1.25    

This means John can assemble 1 cycle and 1/4 of the 2nd cycle.

Therefore,

In 1 hour one cycle and 1/4th of the second cycle can be assembled. or 1.25 cycles can be assembled.

Learn more about Divisions at

https://brainly.com/question/2273245  

#SPJ1

Answer:

x=18

Step-by-step explanation:

We know that triangle ABC is similar to triangle ADE, so therefore the proportions of their corresponding sides must be congruent.

We know that all of AD is 15 and BD is 5, which leaves AB to be equal to 10.

Next, we set up the following proportion: 10/12 = 15/x because they are corresponding sides of similar triangles divided by eachother.

Cross multiply and you will get 10x = 12x15 (180)

next, divide both sides by 10 to isolate x

x = 18

Answer: 5:12< 7:9

Step-by-step explanation: (5:12) x3=   15:36  <  21:36  (7:9)x3=21:36

Answer:

[tex]\frac{5}{12} < \frac{7}{9}[/tex]

Step-by-step explanation:

[tex]5:12[/tex]  [tex]7:9[/tex]

[tex]5*9[/tex]  [tex]7*12[/tex] (using cross multiply)

[tex]45 < 84[/tex]

Therefore your answer is [tex]\frac{5}{12} < \frac{7}{9}[/tex]

Extra:

I hope this helped at all.

Note: (Please don't delete this answer moderators.)

The required cost of each bag of potatoes cost is given as $6.9.

The equation model is defined as the model of the given situation in the form of an equation using variables and constants.

Here,
Let the cost of each bag of potatoes be x,
According to the question,
4.09 + 4x = 31.69
4x = 31.69 - 4.09
x = 27.6/4
x =$6.9

Thus, the required cost of each bag of potatoes cost is given as $6.9.

Learn more about models here:
https://brainly.com/question/22591166
#SPJ1