Suppose a single photon strikes an electron in some material, knocking it out of its atom. Which of the following statements are true concerning the scattered photon?Check all that apply:The scattered photon has greater energy than the incident photon.The scattered photon has a shorter wavelength than the incident photon.The scattered photon has a longer wavelength than the incident photon.The scattered photon has less energy than the incident photon.

To calculate the final temperature of a water-metal mixture, you need to use the principle of conservation of energy. The equation for this is:

where m1 and m2 are the masses of the metal and water, c1 and c2 are their respective specific heat capacities, and ΔT1 and ΔT2 are the changes in their temperatures. You can solve for the final temperature by rearranging this equation.

The actual temperature of the mixture may differ from the calculated final temperature due to several factors, such as the heat loss to the environment during the experiment, imperfect mixing of the water and metal, and measurement errors. These factors can introduce uncertainties in the experimental results, leading to differences between the predicted and actual temperatures.

To know more about the temperature, visit:

https://brainly.com/question/11464844

#SPJ1

The calculated final temperature was slightly lower than the actual temperature of the water-metal mixture. This difference is most likely due to the heat loss due to the environment and also the heat capacity of the mixture.

The calculated final temperature which was slightly lower than that of the actual temperature of the water-metal mixture. This difference in temperature is most likely due to the heat loss due to the environment and heat capacity of the metal-water mixture.

To calculate the final temperature of a water-metal mixture, a person need to use the principle of conservation of energy. The equation for this condition is:

m₁c₁ΔT₁ + m₂c₂ΔT₂ = 0

where m₁ and m₂ are the masses of the metal and water, c₁ and c₂ are their respective specific heat capacities, and ΔT₁ and ΔT₂ are the changes in their temperatures.

The actual temperature of the metal-water mixture may differ from that of the calculated final temperature due to several different factors, such as the heat loss to the environment during the experiment, imperfect mixing of the water and metal element, and the measurement errors. These factors can introduce uncertainties in the experimental results as well, which lead to the differences between the predicted and actual temperatures.

Learn more about Temperature change here:

https://brainly.com/question/28884653

#SPJ11

The chemical contains 18.26% hydrogen in terms of percentage.

A fundamental physical characteristic of matter is mass, which expresses how much matter is present in an item. It serves as a gauge for an object's resistance to acceleration, therefore the more massive an object, the more force is needed to move it.

Calculating the total mass of the compound and the mass of the hydrogen in the compound is necessary to determine the percent composition of hydrogen in the compound.

mass of compound = sum of masses of carbon, hydrogen, and nitrogen.

mass of the mixture= 9.5 g + 3.40 g + 5.71 g

Mass of the compound= 18.61 g.

The compound's mass of hydrogen is:

mass of hydrogen=3.40 g

We can use the following formula to determine the percentage composition of hydrogen:

The percentage of hydrogen=quantity of hydrogen/ the total mass of the chemical x 100%

When we enter the values, we obtain:

hydrogen content as a percentage = (3.40 g/18.61 g) x 100% = 18.26%

Thus, 18.26% of the compound is hydrogen, according to its percent composition.

To know more about mass, visit:

https://brainly.com/question/19694949

#SPJ1

Both water and methanol are commonly used solvents for recrystallization. When it comes to choosing a solvent for recrystallization, it is important to consider factors such as the solubility of the solute, solvent boiling point, and purity of the solvent.

In the case of the compound of interest that can be recrystallized from either methanol or water with good results, the choice of solvent would depend on the properties of the compound. Methanol would be a good solvent if the compound of interest is highly soluble in methanol and has a low boiling point, which means it can be easily separated from the solvent by distillation.

Methanol is a better solvent for recrystallization in the following scenarios:

1. When the compound is highly soluble in methanol.

2. When the compound has a lower boiling point than methanol.

3. When it is essential to obtain a pure compound.

Water would be a good solvent if the compound of interest is less soluble in methanol and has a high boiling point, which means it can be easily separated from the solvent by filtration. Water is a better solvent for recrystallization in the following scenarios:

1. When the compound is less soluble in methanol.

2. When the compound has a higher boiling point than methanol.

To learn more about "recrystallized", visit: https://brainly.com/question/30670227

#SPJ11

The change in mass of the Zn electrode is, y = (x * molar mass of Zn) / molar mass of Cu.

The reaction in the cell involves the transfer of electrons from zinc (Zn) to copper (Cu). The net ionic equation for the reaction is:

Cu²⁺ + Zn --> Cu + Zn²⁺

During the reaction, the mass of the Cu electrode decreases due to the loss of Cu^2+ ions, while the mass of the Zn electrode increases due to the gain of Zn^2+ ions. The change in mass of the Zn electrode can be related to the change in mass of the Cu electrode using the stoichiometry of the reaction.

From the net ionic equation, we can see that for every Zn atom oxidized (loses electrons), one Cu^2+ ion is reduced (gains electrons). Therefore, the moles of Cu lost must be equal to the moles of Zn gained. We can use the molar mass of Cu and Zn to relate the change in mass of the Cu electrode (x grams) to the change in mass of the Zn electrode (y grams) as follows,

moles of Cu lost = moles of Zn gained

(x grams of Cu) / (molar mass of Cu) = (y grams of Zn) / (molar mass of Zn)

Solving for y, the change in mass of the Zn electrode is:

y = (x * molar mass of Zn) / molar mass of Cu

To know more about electrode, here

brainly.com/question/17060277
#SPJ4

The volume of H₂ gas produced from 1.30 g of Mg in excess HCl is 0.0019 L.

The balanced equation for the reaction of magnesium metal with HCl is:

Mg + 2HCl → MgCl₂ + H₂

The molar mass of Mg is 24.31 g/mol.

The mass of Mg that reacted = 1.30 g

The moles of Mg that reacted = 1.30 g ÷ 24.31 g/mol = 0.0535 mol

According to the balanced equation, 1 mol of Mg reacts with 1 mol of H₂

Therefore, 0.0535 mol of Mg will produce 0.0535 mol of H₂.

Since, the volume of gas produced is proportional to the number of moles of the gas, we can use the ideal gas equation to find the volume of H₂

PV = nRT

Where, P = 720 torr = 720/760 atm (1 atm = 760 torr)

T = 34 + 273 = 307 K

R = 0.0821 L·atm/mol·K

V = n × 0.0821 L·atm/mol·K × 307 K/ 720 torr = 0.0535 mol/ 720 torr × 25.2047 L/molK =0.0019 L

At 720 torr and 34 °C, 0.0535 mol of hydrogen occupies a volume of 0.0019 L.

To learn more about "volume of hydrogen", visit: https://brainly.com/question/30176170

#SPJ11

It's not true, no. The resultant solution will be unsaturated because it contains less KCl than the amount that will solubilize in 100 g of water at 40°C, which is 39 g, when 82 g of KCl is added to just 200 g of water.

The greatest quantity of solute that may dissolve in a given amount of solvent at a certain temperature and pressure to create a saturated solution is known as solubility. The solubility of KCl in this situation at 40°C is 39 g in 100 g of water. The solution will be unsaturated if 200 g of water are combined with 82 g of KCl at 40 °C. Because more KCl has been supplied than can dissolve in 200 g of water but less than can dissolve in 300 g of water, this has occurred (100 g for each 100 g of water).

learn more about solubility here:

https://brainly.com/question/22185953

#SPJ4

Answer:

Bond enthalpy is always positive because energy is required to break chemical bonds. Energy is released when a bond forms between gaseous fragments.

The power input required for a mass flow rate of 90 kg/min for the compression process of argon from 120 kPa and 310 K to 700 kPa and 430 K is 37.4 MW.

Given data mass flow rate, m = 90 kg/min, heat loss, Q = 20 kJ/kgInitial pressure, p₁ = 120 kPa. Final pressure, p₂ = 700 kPa, and initial temperature, T₁ = 310 K, final temperature, T₂ = 430 K.

We know that the power input is given by:

P in = m * (h₂ - h₁)

where h₁ and h₂ are the specific enthalpies at states 1 and 2 respectively. Since argon is compressed steadily, it can be assumed that the process is reversible. Thus, we can use the isentropic relation to determine the specific enthalpies:

For state 1:

s₁ = s₂ => entropy is constant h₁ = h(T₁, p₁)

For state 2:

s₂ = s₁ => entropy is constant h₂ = h(T₂, p₂)

The specific enthalpies can be determined using tables for argon. Substituting the values:

P in = m * (h₂ - h₁)

P in = 90 kg/min * ((1528.1 - 924.4) kJ/kg)

P in = 37.4 MW

Therefore, the power input required is 37.4 MW.

Learn more about power input at https://brainly.com/question/29247736

#SPJ11

According to the Beer-lambert law, as the concentration of a substance decreases so should the absorbance of the solution. Thus, the given statement is true.

The Beer-Lambert Law, also known as Beer's Law, Lambert's Law, or the Beer-Lambert-Bouguer Law, is a linear relationship between the attenuation of light and the properties of the material through which the light is traveling.

The Beer-Lambert Law relates the attenuation of light to the properties of the material it travels through. When light passes through a material, it is absorbed, reflected, or scattered in different amounts. The Beer-Lambert Law explains the attenuation of light as a result of the following factors:

Attenuation of light = Absorption of light + Scattering of light + Reflection of light

The Beer-Lambert Law states that the concentration of a material is directly proportional to the amount of light it absorbs. Absorbance decreases as the concentration of the solution decreases according to the Beer-Lambert Law.

Hence, the given statement is true.

Learn more about Beer-lambert law here:

https://brainly.com/question/30404288

#SPJ11

The symbol "en" in this context is not related to the chemical reaction given in the question. "en" is actually an abbreviation for ethylenediamine, which is a type of ligand commonly used in coordination chemistry.

When water is added to anhydrous copper(II) sulfate, two observations are made:

The blue color of anhydrous copper(II) sulfate turns into a deep blue color as the water is added. This is because the anhydrous copper(II) sulfate is undergoing an exothermic reaction with the water to form hydrated copper(II) sulfate, which is blue in color.

As more water is added, the color becomes lighter and eventually the solution becomes clear. This indicates that all of the anhydrous copper(II) sulfate has reacted with water to form hydrated copper(II) sulfate.

Cobalt chloride can be used as a test for the presence of water because it is a hydrate that changes color when it loses its water of hydration. Anhydrous cobalt chloride is blue in color, while hydrated cobalt chloride is pink. When water is added to anhydrous cobalt chloride, it reacts with the water to form hydrated cobalt chloride, which is pink in color. This color change can be used to test for the presence of water in a sample.

To know more about the Anhydrous, here

https://brainly.com/question/14745510

#SPJ4

The entropy of methanol vapor at 800 K is calculated to be 185.4 J/(K mol).

The standard molar entropy (S°) is the entropy of one mole of a substance in its normal state (solid, liquid, or gas) at a standard pressure of 1 bar.

Standard molar entropy of liquid methanol

S° of liquid methanol = 126.8 J/(K mol)

Standard molar entropy of gaseous methanol

The standard molar entropy of gaseous methanol (CH₃OH) can be calculated as follows:

S° of gaseous CH₃OH = S° of liquid CH₃OH + R × ln (P2/P1)

Where, P1 = 1 bar (standard pressure) P2 = vapor pressure of CH₃OH at 298.15 K = 98.8 kPa

R = gas constant = 8.314 J/(K mol)

S° of gaseous CH₃OH = 126.8 J/(K mol) + 8.314 J/(K mol) × ln (98.8 kPa/1 bar)

S° of gaseous CH₃OH = 185.4 J/(K mol)

The entropy of methanol vapor at 800K

The change in entropy of vaporization of methanol can be calculated as follows: ΔSvap = ΔHvap/T

Where, ΔHvap = enthalpy of vaporization = 35.2 kJ/mol

T = temperature = 800 K (in Kelvin)

Convert ΔHvap from kJ/mol to J/mol by multiplying by 1000.

ΔSvap = (35.2 × 1000 J/mol)/800 K

ΔSvap = 44.0 J/(K mol)

Therefore, the entropy of methanol vapor at 800 K is 44.0 J/(K mol).

The experimental value of the standard molar entropy of gaseous methanol at 298.15 K is 239.8 J/(K mol).

The calculated value of the standard molar entropy of gaseous methanol at 298.15 K is 185.4 J/(K mol).

Therefore, the calculated value is less than the experimental value.

Learn more about standard molar entropy here:

https://brainly.com/question/30649683

#SPJ11

The corrective term to the volume in the Van der Waals equation is subtracted and not added because this allows the equation to accurately predict the behavior of real gases.

The Van der Waals equation is an equation of state, which describes the behavior of real gases. Since the actual behavior of real gases is to decrease in volume as the pressure increases, subtracting the corrective term allows the equation to predict this behavior.
The Van der Waals equation is an equation that describes the behavior of real gases. It is based on the Ideal Gas Law but includes two corrective terms:

one for the volume and one for the pressure. The equation is as follows: (P + a(n/V)²)(V - nb) = nRT

where: P = pressure ,V = volume , n = number of moles , R = gas constant , T = temperature , a = a constant that takes into account the attractive forces between gas particles, b = the volume of one mole of gas particles

For the volume term in the equation, the corrective term is -nb.

Hence , This term subtracts the volume of the gas particles themselves from the total volume. This is necessary because gas particles occupy some volume and therefore reduce the total volume of the gas. Without this corrective term, the equation would not accurately predict the behavior of real gases.

To know more about Real gases refer here :

https://brainly.com/question/15962335

#SPJ11

The radius of the circular path of the Ni+ ion is r = 3.27 x 10⁻⁶ v meters proportional to its velocity v. The diagram has been attached below.

Lorentz force refers to the force experienced by a charged particle in an electromagnetic field. It is named after the Dutch physicist Hendrik Lorentz who first described this force in 1892. The force arises from the interaction between the magnetic and electric fields that may be present in the vicinity of a charged particle.

The Lorentz force on a charged particle is given by the vector product of its velocity and the magnetic field, as well as by the scalar product of its charge and the electric field. The Lorentz force equation is:

F = q(E + v x B)

a) The diagram shows the direction of travel (v) and the charge (+1e) of the singly ionized Nickel atom (Ni+), as well as the uniform magnetic field (B) directed into the page. The path of the Ni+ ion is perpendicular to both v and B, and is deflected in a circular path due to the Lorentz force.

(b) The radius of the particle can be calculated using the equation for the Lorentz force:

F = qvB

where F is the force on the particle, q is the charge, v is the velocity, and B is the magnetic field. Since the force is perpendicular to both v and B, the path of the particle is circular.

The centripetal force on the particle is provided by the magnetic force, so we can equate the two:

F = ma = mv²/r

where m is the mass of the particle, a is the centripetal acceleration, and r is the radius of the circular path.

Combining these two equations, we get:

qvB = mv²/r

Solving for r, we get:

r = mv/qB

Substituting the values given, we get:

r = (9.80 x 10⁻²⁶ kg)(v)/(1e)(0.3 T)

r = 3.27 x 10⁻⁶ v meters

To know more about electric fields, visit:

https://brainly.com/question/8971780

#SPJ1

The gas law that is employed to deflate a football is Boyle's law.

Boyle's law states that for a fixed amount of gas at a constant temperature, the pressure and volume of the gas are inversely proportional to each other. The equation for Boyle's law is:

[tex]P_{1} V_{1} /P_{2} V_{2}[/tex]

Where [tex]P_{1}[/tex] is the initial pressure of the gas, [tex]V_{1}[/tex]  is the initial volume of the gas,[tex]P_{2}[/tex] is the final pressure of the gas, and [tex]V_{2[/tex] is the final volume of the gas. In the case of deflating a football, the pressure of the air inside the football is reduced by letting some of the air out. The volume of the football decreases as the pressure decreases, and this is in accordance with Boyle's law.

Therefore, The Boyle's Law is used to deflate a football. It states that the volume of a gas is inversely proportional to its pressure, when the temperature is constant.

To know more about Boyle's law refer here :

https://brainly.com/question/1696010

#SPJ11

(A) BF3 is the compound having atoms that are missing one or more of their octets.

According to the octet rule, atoms typically link together in molecular structures so that each atom has eight electrons in its outermost valence shell. There are, however, several exceptions to this rule. One such example is boron trifluoride (BF3). Boron can only form three bonds since it only possesses three valence electrons. In BF3, boron makes three covalent connections with three fluorine atoms, giving rise to six rather than the anticipated eight electrons in the outer shell of the atom. As a result, boron in BF3 has an unfinished octet. Since the atoms in such compounds are not quite content with their electron arrangement, they are more prone to engage in chemical processes in order to complete their octets.

learn more about octets here:

https://brainly.com/question/10535983

#SPJ4

The ion with the smallest number of unpaired electrons is Co2+  . This is because Nickel (Ni) has a total of 10 electrons in its valence shell, which can be arranged into the following electron configuration: 1s2 2s2 2p6 3s2 3p6 3d8. This arrangement allows for all of Nickel's electrons to be paired, resulting in 0 unpaired electrons.

The ion that has the smallest number of unpaired electrons is Co2+. The reason for this is as follows:An unpaired electron is defined as an electron that occupies a particular atom's orbital without any other electron. It is crucial to consider that elements or ions with half-filled or completely filled orbitals are more stable than those with partially filled orbitals. Thus, it is essential to consider how many unpaired electrons each of these ions has before answering which of these ions has the smallest number of unpaired electrons.

Looking at the electron configurations of each ion, we can see that Ni2+ and V2+ both have three unpaired electrons, Cr2+ has four unpaired electrons, Fe3+ has five unpaired electrons, and Co2+ has seven unpaired electrons. This indicates that the ion with the smallest number of unpaired electrons is Co2+.

Thus, Co2+ has the smallest number of unpaired electrons.

For more such questions on electrons , Visit:

https://brainly.com/question/371590

#SPJ11

The percent recovery is the ratio of the actual amount of the desired substance to the original amount present. The total percent recovery can be calculated by using the formula given below.

The units and the correct significant digits should be used in the calculation. We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure. For example, if the product is left on the filter paper while washing, then the actual yield will be less than the theoretical yield.

Calculate the total percent recovery. show calculation with units and correct significant digits. The percent recovery formula is:

Percent recovery = Actual yield ÷ Theoretical yield × 100%

Given, Actual yield = 70 theoretical yield = 80

percentage recovery = Actual yield ÷ Theoretical yield × 100 %

Percentage recovery = 70 ÷ 80 × 100 %

Percentage recovery = 0.875 × 100 %

Percentage recovery = 87.5 %

Therefore, the total percent recovery is 87.5 % with the correct significant digits. Why do we expect that the percent recovery will be less than 100 % for this experiment? We expect that the percent recovery will be less than 100 % for this experiment because of the loss of product due to impurities or mistakes in the experimental procedure.

Learn more about  percent recovery at brainly.com/question/14972210

#SPJ4

The left side of this equilibrium constant equation for the reaction of hypochlorous acid with water is filled as

HClO + H₂O ⇌ H₃O⁺ + ClO⁻

When HClO reacts with water, it can undergo a reversible dissociation reaction, which results in the formation of hydronium ions (H3O+) and hypochlorite ions (ClO-). Therefore, we can fill in the left side of the equation as follows,

HClO + H₂O ⇌ H₃O⁺ + ClO⁻

Note that the reaction can occur in both directions, and the equilibrium constant (K) expresses the ratio of the concentrations of the products to the concentrations of the reactants at equilibrium.

To know more about equilibrium constant, here

brainly.com/question/10038290

#SPJ4

--The complete question is, Fill in the left side of this equilibrium constant equation for the reaction of hypochlorous acid with water

HClO + H2O ⇌ _____ + _____--

During the relative refractory period of the action potential, the axolemma is more permeable to potassium ions.

Axolemma refers to the plasma membrane that surrounds an axon. It is a lipid bilayer that is semipermeable, meaning that it only permits certain molecules and ions to pass through. The action potential is a temporary change in the electrical potential that travels along the axon of a neuron. An action potential is generated when the axon is depolarized, causing a brief, rapid reversal of the polarity of the axolemma. This reversal of polarity triggers the release of neurotransmitters from the axon terminal into the synaptic cleft.

When an action potential is generated, the axolemma becomes more permeable to ions. During the relative refractory period, which is the period immediately following an action potential, the axolemma is more permeable to potassium ions. This increased permeability is due to the opening of voltage-gated potassium channels in the axolemma, which allows potassium ions to move out of the cell.

The relative refractory period is a time when it is harder to generate another action potential in the axon. This is because the threshold for depolarization is higher due to the increased permeability of the axolemma to potassium ions. However, it is still possible to generate another action potential if the stimulus is strong enough to overcome the increased threshold.

Learn more about Relative refractory period here:

https://brainly.com/question/30460363

#SPJ11

The running water dissolves soluble minerals, and this material is most likely to be transported by a stream as a solution.

Soluble minerals are minerals that dissolve in water. Water can dissolve many substances, including gases and solids.

Most minerals are insoluble in water, which means they do not dissolve in water.

Running water dissolves soluble minerals. When these minerals dissolve, they form a solution in the water. Dissolved solids or dissolved minerals in water are called dissolved loads.

Thus, dissolved soluble minerals are most likely to be transported by a stream as a solution.

Learn more about dissolved soluble minerals here:

brainly.com/question/937307

#SPJ11

Answer:

A mole is defined as 6.02214076 × 1023 of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.

Explanation:

A balanced chemical reaction gives equivalences in moles that allow stoichiometry calculations to be performed. Mole quantities of one substance can be related to mass quantities using a balanced chemical equation. Mass quantities of one substance can be related to mass quantities using a balanced chemical equation.

The molarity of a NaOH solution with 40 g of sodium hydroxide dissolved in water to form 500 mL of solution is 2 M.

To determine the molarity of a NaOH solution with 40 g of sodium hydroxide dissolved in water to form 500 mL of solution, we will use the formula for molarity:

Molarity = moles of solute/volume of solution in liters

To use this formula, we first need to calculate the number of moles of NaOH in the solution:

Mass of NaOH = 40 g

Molar mass of NaOH = 40.00 g/mol

Number of moles of NaOH = mass/molar mass = 40 g/40.00 g/mol = 1 mol

Now we can use the formula for molarity:

Molarity = moles of solute/volume of solution in liters

Molarity = 1 mol/0.5 L = 2 mol/L

Therefore, the molarity of the NaOH solution is 2 M.

To know more about molarity, refer here:

https://brainly.com/question/8732513#

#SPJ11

The pressure of the gas mixture is 8.84 atm.

The pressure of the gas mixture is determined by the Ideal Gas Law, which states that the pressure of a gas is equal to the number of moles of the gas multiplied by the gas constant, R, multiplied by the temperature of the gas in Kelvin, divided by the volume of the container.

To find the pressure of the gas mixture, we can use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

To calculate the total number of moles of gas in the container:

total moles of gas = 2.5 moles (nitrogen) + 1.8 moles (hydrogen)

total moles of gas = 4.3 moles

To convert the temperature from Celsius to Kelvin by adding 273:

T = 273 K

The value of the ideal gas constant, which is 0.0821 L·atm/K·mol.

P = nRT / V

P = (4.3 moles)(0.0821 L·atm/K·mol)(273 K) / 11.2 L

P = 8.84 atm

Therefore, the pressure of the gas mixture is 8.84 atm.

To know more about ideal gas law click here:

https://brainly.com/question/28257995

#SPJ11

To determine how much sodium chloride will not dissolve, we need to know the solubility of NaCl at 80°C. At 80°C, the solubility of NaCl in water is 37.8 g/100 mL.

We have 100 grams of water which is equivalent to 100/1000 = 0.1 L of water.

The maximum amount of NaCl that can dissolve in 0.1 L of water at 80°C is:

37.8 g/100 mL x 0.1 L = 0.378 x 10 g = 3.78 g

Since we have 50 grams of NaCl, which is greater than the maximum amount that can dissolve, the excess amount that will not dissolve is:

50 g - 3.78 g = 46.22 g

Therefore, 46.22 grams of NaCl will not dissolve.

320.45 grams of hydrazine are needed to produce 10.0 mol of nitrogen gas.

What is Hydrazine?

It is a colorless, flammable, and highly toxic liquid with an ammonia-like odor. Hydrazine is used in a variety of industrial applications, including as a rocket propellant, polymerization catalyst, and in the production of pesticides, pharmaceuticals, and other chemicals.

a. The balanced chemical equation for the reaction between hydrazine and hydrogen peroxide is:

N2H4 (l) + H2O2 (l) → N2 (g) + 2H2O (l)

b. To determine the amount of hydrazine required to produce 10.0 mol of nitrogen gas, we can use stoichiometry and the balanced chemical equation.

From the equation, we can see that 1 mole of N2 is produced for every mole of N2H4 consumed. Therefore, the amount of N2H4 required can be calculated as:

10.0 mol N2H4 / 1 mol N2 = 10.0 mol N2H4

To convert from moles of N2H4 to grams, we need to use the molar mass of N2H4, which is 32.045 g/mol. Therefore, the mass of N2H4 required can be calculated as:

10.0 mol N2H4 x 32.045 g/mol = 320.45 g

Learn more about Hydrazine from given link

https://brainly.com/question/7484865

#SPJ1

Answer:

D

Explanation:

I had this question before :)

The main difference between nucleic acids and carbohydrates is that nucleic acids are made up of nucleotides, while carbohydrates are made up of monosaccharides.

Therefore, the property that distinguishes nucleic acids from carbohydrates is their composition of nucleotides, which are the basic structural units of nucleic acids.

What are nucleic acids?

Nucleic acids are the biomolecules that encode and transmit genetic information in cells.

They are primarily composed of carbon, nitrogen, oxygen, and phosphorus, and are formed by polymerization reactions in which nucleotides are joined by phosphodiester bonds to form polynucleotide chains.

What are carbohydrates?

Carbohydrates are organic compounds composed of carbon, hydrogen, and oxygen, with the general formula CnH2nOn.

They are classified based on the number of monosaccharide units they contain, with monosaccharides being the simplest and most basic carbohydrate units.

Carbohydrates serve as a source of energy and a structural component in living organisms.

For similar question on nucleic acids.

https://brainly.com/question/12206202

#SPJ11

Certain molecules/atoms can diffuse directly through the phospholipid bilayer of a membrane (without the help of a transport protein). Small, non-polar molecules can diffuse most easily directly through a membrane.

What is the membrane?

Membrane can be defined as a selectively permeable layer which encloses the cell or organelles in it. Membrane acts as a physical barrier that separates a cell from its environment. It allows the entry of certain nutrients and minerals and expels waste and other unwanted products. Diffusion is the movement of substances from a region of higher concentration to a region of lower concentration in order to attain equilibrium. It is due to the random motion of particles. No energy is required for this process, and it is a passive process.

The types of molecules that will diffuse most easily directly through a membrane are small, non-polar molecules. These types of molecules have a very small molecular weight, and they are able to fit easily through the gaps between the phospholipids in the membrane. Some examples of small, non-polar molecules include oxygen, carbon dioxide, and lipids.

Learn more about diffusion on:

https://brainly.com/question/94094

#SPJ11

In reverse-phase TLC (Thin-Layer Chromatography), the stationary phase is hydrophobic, while the mobile phase is typically a polar solvent. In this case, the stationary phase is modified silica with octadecane (C18) molecules at the surface instead of hydroxyl groups.

The elution order in reverse-phase TLC is generally determined by the polarity of the compounds being separated. Polar compounds tend to interact more strongly with the stationary phase, leading to slower movement and delayed elution. On the other hand, non-polar compounds have weaker interactions with the stationary phase and elute faster.

With the C18-modified silica stationary phase, the octadecane molecules provide a hydrophobic environment that favors the interaction with non-polar or hydrophobic compounds. The elution order in reverse-phase TLC is the opposite of normal-phase TLC, where more polar compounds elute first.

Therefore, the elution order in reverse-phase TLC is generally non-polar/hydrophobic compounds first, followed by moderately polar compounds, and finally by polar compounds.

For more detail regarding TLC (Thin-Layer Chromatography), visit:

https://brainly.com/question/10296715

#SPJ12

Fluorine accounts for 70.37% of the mass.

To find the percent of the mass that is from fluorine, we need to first find the mass of fluorine in the sample.

Mass of fluorine = Total mass of the sample - Mass of oxygen in the sample

⇒       Mass of fluorine = 0.432 g - 0.128 g = 0.304 g

Now, we can calculate the percent of the mass that is from fluorine using the formula:

% mass of fluorine = (Mass of fluorine / Total mass of the sample) x 100%

⇒      % mass of fluorine = (0.304 g / 0.432 g) x 100% = 70.37%

Therefore, approximately 70.37% of the mass in the sample is from fluorine.

The problem requires us to determine the percentage of the mass that is from fluorine in a sample containing only oxygen and fluorine. To do so, we first need to calculate the mass of fluorine in the sample by subtracting the mass of oxygen from the total mass of the sample. Once we know the mass of fluorine, we can use the formula for percent composition to calculate the percentage of the mass that is from fluorine. This problem emphasizes the importance of knowing how to calculate the percent composition of elements in a given compound or mixture.

To know more about the Mass, here

https://brainly.com/question/24233677

#SPJ4