Suppose you have a mixture of iron filings, sand, and sugar and you want to separate the three. Fill in the materials you expect to see at each step as you perform the actions shown to separate them. The materials you may expect to see are: iron filings, sand, sugar, and sugar water.

Answer:

A. a power source connected to the primary coil

Explanation:

Answer:

The volume will decrease and the balloons will be smaller

Answer:

A: dependent variable

B: experimental group

C: independent variable

D: control variables

E: control group

Explanation:

Agricultural research careers would a student studying biotechnology most likely pursue. Therefore, option C is correct.

The United States Department of Agriculture's main internal research organization is the Agricultural Research Service. One of the four organizations in the USDA's mission area for research, education, and economics is ARS.

A wide definition of agricultural research is any research activity that aims to increase crop output and quality through genetic improvement, improved plant protection, irrigation, storage techniques, farm mechanization, effective marketing, and better resource management.

Agricultural research's main goals are to advance knowledge and advance technology. It deepens comprehension of the linkages and interconnectedness between farming communities and production systems.

Thus, option C is correct.

To learn more about agriculture research, follow the link;

https://brainly.com/question/18327351

#SPJ6

answer:

-4

hope this helps

Answer:

option b is correct

Explanation:

Metals are particularly good conductors of heat because their particles are very closely packed so the vibrations are passed on very quickly. They also contain large numbers of free electrons. These drift slowly through the structure, giving metals their strength and other properties. As the metal is heated, the free electrons closest to the heat source are heated. This makes them move faster and they travel through the metal, colliding with both atoms and other electrons. This naturally makes these vibrate faster (or move through the metal faster in the case of collisions with other free electrons). Thus, the heat is passed quickly through the metal.

hope it helps you

please mark me as brainlist

Answer:

yes

Explanation:

The correct equation for the decomposition of copper carbonate is:

CuCO3 → CuO + CO2

Answer:

wait so dose it acid burn your body I would say hydrogen but I'm probably wrong tell me if I am

Complete question is;

When solid materials are heated.the heat absorbed/added to the materials caused the materials to change its form from?

Answer:

From solid to liquid

Explanation:

When we heat solid materials, the heat causes the forces of attraction between the molecules to become weaker and as such, the material becomes more loose than it was in the solid state. As a result, the material now becomes a liquid because the molecules now have lesser forces of attraction and are a bit loose.

Answer:

A. moving

Explanation:

Answer:

The energy required is 158 J

Explanation:

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

When the heat added or removed from a substance causes a change in temperature in it without affecting its molecular structure, this heat is called sensible heat.

In other words, when a system absorbs (or gives up) a certain amount of heat, it can happen that it experiences a change in its temperature, which implies sensible heat.

The equation that allows calculating heat exchanges is:

Q = c * m * ΔT

where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.

In this case:

Replacing:

Q= 0.79 [tex]\frac{J}{g*C}[/tex] *10 g* 20 C

Solving:

Q= 158 J

The energy required is 158 J

Answer:

Deciliter = 0.1 L

Explanation:

The options are unit of volume. In order to determine which is greatest, all the options would be converted to liter.

Microliter = 1e-6 L

Mililiter = 0.001 L

Deciliter = 0.1 L

Centiliter = 0.01 L

Among all the options; Deciliter = 0.1 L is the greatest.

Answer: 0.74 moles

Explanation:

The first step is to figure out the chemical formula for calcium phosphate. Since we know that calcium is a metal, this will be an ionic bond. Calcium is written as Ca and has a charge of +2. Phosphate is written as PO4 with a charge of -3. To come up with the subscripts for this formula, cross the charges. That means that you will get [tex]Ca_{3} (PO_{4} )_{2}[/tex].

Next, calculate how many grams one molecule of calcium is. Calcium has an atomic weight of 40, and there are 3 molecules of calcium, so 40 x 3 = 120. Phosphorus has an atomic weight of 31, and there are 2 molecules of phosphorus, so 31 x 2 = 62. Oxygen has an atomic weight of 16, and there are 8 molecules of oxygen, so 16 x 8 = 128. Adding all of those together gives you 310 g.

Now, using stoichiometry, we can figure out the question. We know that there are 230 grams. We also know that one mole weighs 310 g. If you divide 230 by 310, you will get your answer, which is 0.74 moles.

Answer:

C) Lipids and Carbohydrates

Explanation:

Lipids, or fats, are stored long-term for energy when an organism cannot find carbohydrates (specifically glucose), which are used as short-term energy.

Answer:

Heat Capacity = E / T.

- Find the difference in temperature for changes of multiple degrees.

- Add the appropriate units to your answer to give it meaning.

- Know that this equation works for cooling objects as well.

- Know that specific heat refers to the energy needed to raise one gram by one degree.

Answer:

It's Mass

Explanation: I took the quiz

Have a good day!

Mass is the amount of matter in an object. Therefore, option C is correct.

Mass can be defined as an intrinsic property of a body. mass can be described as the quantity of matter in a body. Different atoms and different particles with the same amount of matter have nonetheless different masses.

Mass can be experimentally measured by the body's inertia, meaning the resistance to acceleration when a net force is applied. The mass determines the strength of its gravitational attraction to other bodies.

The SI base unit of measurement of mass is the kilogram (kg) and it is not the same as weight. Mass is generally determined by measuring the weight using a spring scale, rather than a balance scale and comparing it to known masses.

An object on the Moon will weigh less than it does on Earth due to the lower gravity but still have the same mass. Weight can be defined as a force, while mass is the property that determines the strength of this force.

Learn more about mass, here:

https://brainly.com/question/13040516

#SPJ6

Answer:

See explanation

Explanation:

A word equation refers to a representation of a chemical process using word rather than appropriate chemical formulae.

Hence, the word equation for photosynthesis is this;

six moles of carbon dioxide + six moles of water -----> one mole of glucose + six moles of oxygen gas

The equation with formulae is;

6CO2 + 6H20 -------> C6H1206 + 6O2

Balanced chemical equation with states;

6CO2(g) + 6H20(l) -------> C6H1206(s) + 6O2(g)

Answer:

b

Explanation:the shell is 2 so ignore the 1s electrons it is only the level 2 electrons that are valence

Answer:

A partial lunar eclipse occurs when only a portion of the Moon enters Earth's umbra, while a total lunar eclipse occurs when the entire Moon enters the planet's umbra.

Answer:

it would be C

Explanation:

Answer: C

Explanation:

both numbers have 2 S.F. so the answer should have 2 too.

Answer:

[tex]0.75\ \text{M}[/tex]

Explanation:

[tex]C_1[/tex] = Concentration of [tex]Na_2CO_3[/tex]

[tex]C_2[/tex] = Concentration of [tex]HCl[/tex] = 1 M

[tex]V_1[/tex] = Volume of [tex]Na_2CO_3[/tex] = 20 mL

[tex]V_2[/tex] = Volume of [tex]HCl[/tex] = 15 mL

We have the relation

[tex]V_1C_1=V_2C_2\\\Rightarrow C_1=\dfrac{V_2C_2}{V_1}\\\Rightarrow C_1=\dfrac{15\times 1}{20}\\\Rightarrow C_1=0.75\ \text{M}[/tex]

The concentration of [tex]Na_2CO_3[/tex] is [tex]0.75\ \text{M}[/tex].

Answer:

Explanation:

Answer:

Emissions produced by burning fossil fuels

Explanation:

these gases decreases the ph level of rain water that makes water acidic

1.497 mol Ir

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

287.7 g Ir

Step 2: Identify Conversions

[PT] Molar Mass of Ir - 192.22 g/mol

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 4 sig figs.

1.49672 mol Ir ≈ 1.497 mol Ir

Answer:

[tex]\boxed {\boxed {\sf About \ 1.497 \ mol \ Ir }}[/tex]

Explanation:

To convert from grams to moles, we must the molar mass of iridium, which can be found on the Periodic Table.

Use the molar mass as a ratio.

[tex]\frac{ 192.22 \ g \ Ir}{ 1 \ mol \ Ir}[/tex]

Multiply by the given number of grams: 287.7

[tex]287.7 \ g Ir *\frac{ 192.22 \ g \ Ir}{ 1 \ mol \ Ir}[/tex]

Flip the fraction so the grams of Iridium will cancel.

[tex]287.7 \ g Ir *\frac{1 \ mol \ Ir }{ 192.22 \ g \ Ir}[/tex]

[tex]287.7 *\frac{1 \ mol \ Ir }{ 192.22 }[/tex]

[tex]\frac {287.7 \ mol \ Ir }{192.22} \\[/tex]

Divide.

[tex]1.49672251 \ mol \ Ir[/tex]

The original measurement has 4 significant figures, so we must round our answer to 4 sig figs as well. For the answer we calculated, that is the thousandth place.

The 7 in the ten thousandth place tells us to round the 6 up to a 7.

[tex]1.497 \ mol \ Ir[/tex]

There are about 1.497 moles of iridium in 287.7 grams.

Br- + 2MnO4- + 2H+ → BrO3- + 2MnO2 + H2O

Given

MnO4- + Br- = MnO2 + BrO3-

Required

The half-reaction

Solution

In acidic conditions :

1. Add the coefficient

2. Equalization O atoms (add H₂O) on the O-deficient side.  

3. Equalization H atoms (add H⁺ ) on the H -deficient side.  .  

4. Equalization of charge (add electrons (e) )

5. Equalizing the number of electrons and then adding the two half -reactions together

Oxidation : Br- → BrO3-  

Reduction : MnO4- → MnO2

Br- + 3H2O → BrO3-  

MnO4- → MnO2 + 2H2O

Br- + 3H2O → BrO3- + 6H+  

MnO4- + 4H+ → MnO2 + 2H2O

Br- + 3H2O → BrO3- + 6H+ + 6e-         x1

MnO4- + 4H+ + 3e- → MnO2 + 2H2O x2

Br- + 3H2O → BrO3- + 6H+ + 6e-  

2MnO4- + 8H+ + 6e- → 2MnO2 + 4H2O

Br- + 2MnO4- + 3H2O + 8H+ + 6e- → BrO3- + 2MnO2 + 6H+ + 4H2O + 6e-

Br- + 2MnO4- + 2H+ → BrO3- + 2MnO2 + H2O

Answer:

1. In a chemical reaction, the atoms and molecules that interact with each other are called reactants. ... No new atoms are created, and no atoms are destroyed. In a chemical reaction, reactants contact each other, bonds between atoms in the reactants are broken, and atoms rearrange and form new bonds to make the products.

2. Given below are some of the examples of the chemical reactions in our daily life:

Photosynthesis.

Combustion.

Aerobic cellular respiration.

Anaerobic respiration including the process fermentation.

Metathesis reactions, for example, vinegar and baking soda.

Oxidation which includes rusting.

Digestion.

3. A chemical formula is the combination of atomic symbols that designate a particular chemical compound, or a substance with two or more different elements. ... A chemical equation shows one or more chemical compounds (reactants) being converted into different chemical species called products.

Answer: [tex]8.38\times 10^{23}atoms[/tex] of carbon

Explanation:

According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.

mass of sugar= [tex]density\times volume=1.59g/ml\times 25ml=39.75g[/tex]

To calculate the moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{39.75g}{342.3g/mol}=0.116moles[/tex]

1 mole of sugar [tex]C_{12}H_{22}O_{11})[/tex] contains = [tex]12\times 6.023\times 10^{23}=72.28\times 10^{23}atoms[/tex] of carbon

0.116 mole of sugar [tex]C_{12}H_{22}O_{11})[/tex] contains = [tex]\frac{72.28\times 10^{23}}{1}\times 0.116=8.38\times 10^{23}atoms[/tex] of carbon