The total cost of compensated absences for Tamarisk Company for the years 2019 and 2020 was $348 + $1,399 = $1,747.
To calculate the cost of compensated absences for Tamarisk Company, we need to calculate the number of vacation days and sick days earned by the employees in 2019 and 2020, and then calculate the cost of the days earned but not taken.
Each employee earns 9 vacation days per year. As they can be taken after January 15th of the year following the year in which they are earned, the vacation days earned by the employees in 2019 can be taken in 2020. Therefore, in 2019, no vacation days were taken by any employee.
In 2020, the employees took a total of 8 vacation days. As there are 9 employees, the total vacation days taken in 2020 were 9 x 8 = 72.
Sick Days:
Each employee earns 7 sick days per year, and unused sick days accumulate. In 2019, the employees used a total of 5 sick days. Therefore, the unused sick days at the end of 2019 were 9 x 7 - 5 = 58.
In 2020, the employees used a total of 6 sick days, and the unused sick days at the end of 2020 were 58 + 9 x 7 - 6 = 109.
To find the cost of compensated absences. The unused sick days and vacation days must be multiplied to get the hourly wage rate in effect in a year.
In 2019, the cost of compensated absences was 58 x $6 = $348.
In 2020, the cost of compensated absences was (72 + 109) x $7 = $1,399.
Therefore, the total cost of compensated absences for Tamarisk Company for the years 2019 and 2020 was $348 + $1,399 = $1,747.
To know more about the cost of compensated absences
brainly.com/question/12987530
#SPJ4
Laura has done a two-factor factorial completely randomized design. From her experiment, Laura has constructed the following incomplete ANOVA display: Source SS DF MS F A 350.00 2 B 300.00 150 AB 200.00 50 Error 150.00 Total 1000.00 18 a. How many levels of factor B did she use in the experiment? b. How many degrees of freedom are associated with interaction? c. The error mean square is d. The mean square for factor A is e. How many replicates of the experiment were conducted? f. What are your conclusions about interaction and the two main effects? g. An estimate of the standard deviation of the response variable is h. If this experiment had been run in blocks (CRBD) there would have been degrees of freedom for blocks.
a. Two levels of factor B were used in the experiment.
b. The degrees of freedom associated with interaction are 50.
c. The error mean square is 6.00. d. The mean square for factor A is 175.00.e. The experiment was conducted with three replicates.f. The interaction is significant. Factor A is significant. Factor B is not significant.g. An estimate of the standard deviation of the response variable is 2.449. h. If the experiment had been run in blocks (CRBD) there would have been 12 degrees of freedom for blocks.Solution:Factorial design: A factorial design is an experimental design that consists of two or more factors, each with two or more levels, and each subject is assigned to one and only one level of each factor. The objective of a factorial experiment is to analyze the effect of each factor on the response variable and to examine if there is any interaction between factors.a. Two levels of factor B were used in the experiment.b. Interaction degrees of freedom = AB = 50.c.
Mean square for error: MSE = 150/10 = 15.d. Mean square for factor A: MS(A) =[tex]SSA/dfA = 350/2 = 175.e.\\[/tex] Three replicates were conducted (from the error df = 10).f. Interaction is significant. Factor A is significant. Factor B is not significant.g. Estimate of the standard deviation of the response variable: sqrt(15/2) = 2.449.h. If the experiment had been conducted in a CRBD, there would have been 12 degrees of freedom for the block.
for such more questions on standard deviation
https://brainly.com/question/475676
#SPJ11
viola practices long-jumping. on average she has jumped 3.80 m so far. on the next jump she reaches 3.99 m and thus the mean increases to 3.81 m. how far does she have to jump on her next attempt in order to increase her mean to 3.82 m?
Viola needs to jump a distance of 0.04 m on her next attempt to increase her mean to 3.82 m
On average, she has jumped 3.80 m so far. Therefore, the sum of distances jumped so far by her is:
3.80 m × the total number of jumps taken so far.
On the next jump, she reaches 3.99 m. Therefore, after the next jump, the total distance jumped so far by her will be 3.80 m × total number of jumps taken so far + 3.99 m. The new mean is 3.81 m.
Therefore, (3.80 m × total number of jumps taken so far + 3.99 m)/(total number of jumps taken so far + 1) = 3.81.
The above equation can be simplified as 3.80 m × total number of jumps taken so far + 3.99 m = 3.81 m × (total number of jumps taken so far + 1).
This simplifies to 3.80 m × total number of jumps taken so far + 3.99 m = 3.81 m × total number of jumps taken so far + 3.81 m. Now, we need to solve the above equation to find out the distance she needs to jump on her next attempt to increase her mean to 3.82 m.
3.80 m × total number of jumps taken so far + 3.99 m = 3.81 m × total number of jumps taken so far + 3.81 m.
0.01 m = 0.01 m × total number of jumps taken so far.
1 = total number of jumps taken so far. Now, she needs to jump a distance of (3.82 m × (total number of jumps taken so far + 1)) - (3.80 m × total number of jumps taken so far)
= (3.82 m × (1 + 1)) - (3.80 m × 1)
= 3.82 m × 2 - 3.80 m
= 0.04 m
Therefore, she needs to jump a distance of 0.04 m on her next attempt to increase her mean to 3.82 m.
To learn more about mean and distance refer :
https://brainly.com/question/28448081
#SPJ11
the area of rectange is 297 sq cm if its length is increased by 3 cm and width decreases by 1 cm its area increased by 3 cm. sq. find the length and width of rectangle
The length and width of the rectangle is about 33cms and 9cms. This can be calculated with the help of the given area of the rectangle.
What is the width and length of rectangle?Let the original length and width of the rectangle be L and W respectively.
The given area of the rectangle is 297 square cm.
Area = L × B
297 = L × B
As per the question, the length is increased by 3 cm and the width is decreased by 1 cm.
Therefore, the new length and width are L + 3 and W - 1 respectively.
The new area is 3 square cm more than the original area.
So, (L + 3) × (W - 1) = 297 + 3
L×W -L +3W - 303 = 0
297 - L +3W - 303 = 0
-L + 3W - 6 = 0
-297/W + 3W = 6
-297 + 3W² = 6W
W² - 2W - 99 = 0
Using the quadratic formula, we get,
W = -2±[tex]\sqrt{ 2^2 - 4X1 X ( -99 ) ] ) / 2 X1 }[/tex]
[tex]W =\frac{-2±\sqrt{ (4+396)}}{2}[/tex]
[tex]W =\frac{-2±20}{2}[/tex]
Width can't be negative so, W = 9 cm
So, L 297/W
L = 297/9
L = 33cm
Therefore, the length and width of the rectangle are 33 cm and 9 cm respectively.
Learn more about Area here:
https://brainly.com/question/27683633
#SPJ11
what is the shortest to longest 1 2/5 and 1 3/4 and 1 7/10
1 2/5, 1 3/4, 1 7/10 from least to greatest is 1 2/5, 1 7/10, 1 3/4
This is because when you convert these fractions to decimals you get 1.4, 1.75, and 1.7. which can easily be organized
The density function of the continuous random variable X, the total number of hours, in units of 100 hours, that a family runs a vacuum cleaner over a period of one year, is given in Exercise 3.7 on page 92 as f(x) = {x, 0 < x < 1, 2 - x, 1 lessthanorequalto x lessthanorequalto 2, 0, elsewhere. Find the average number of hours per year that families run their vacuum cleaners. Find the proportion X of individuals who can be expected to respond to a certain mail-order solicitation if X has the density function
The density function of the continuous random variable X, the total number of hours, in units of 100 hours, that a family runs a vacuum cleaner over a period of one year, is given in Exercise 3.7 on page 92 as f(x) = {x, 0 < x < 1, 2 - x, 1 ≤ x ≤ 2, 0, elsewhere.
To find the average number of hours per year that families run their vacuum cleaners, we must calculate the expected value of X. This is done by integrating the density function of X over the given range:
E(X) = ∫0,2 x * f(x) dx
= ∫0,1 x2 dx + ∫1,2 (2-x) x dx
= (1/3) + (-2 + 4 - 2/3)
= 8/3
Therefore, the average number of hours per year that families run their vacuum cleaners is 8/3, or approximately 2.67 hours.
To find the proportion of individuals who can be expected to respond to a certain mail-order solicitation if X has the density function, we must calculate the cumulative density function of X. This is done by integrating the density function of X over the given range:
F(X) = ∫0,x f(x) dx
= ∫0,x x dx + ∫x,2 (2-x) dx
= (1/2)x2 + 2x - 2
Therefore, the proportion of individuals who can be expected to respond to a certain mail-order solicitation if X has the density function is (1/2)x2 + 2x - 2.
#SPJ11
Learn more about density function and random variables at: https://brainly.com/question/30717978
Fatima 56 roses, 48 irises and 16 freesia. she wants to create bouquets using all the flowers. calculate the highest number of similar bouquets she can make without having any flowers left over
Answer:
We see that each fraction is in simplest form, and they add up to 1, so this confirms that 168 is the highest number of similar bouquets that Fatima can make without having any flowers left over.
Step-by-step explanation:
Yeah, I guess what that person said ^^ ??
Arrange the steps in the correct order to find an inverse of a modulo m for each of the following pairs of relatively prime integers using the Euclidean algorithm. a = 55, m= 89 Rank the options below. The steps to find gcd(55, 89) using the Euclidean algorithm are listed below. 89 = 1.55 +34 55 = 1.34 +21 34 = 1.21 + 13 21 1 . 13 + 8 13 = 1.8+5 8 = 1.5+ 3 5 = 1.3+2 3 = 1.2+1 2 = 1.2 The Bézout coefficient of 55 is 34, and it is an inverse of 55 modulo 89. The Bézout coefficients of 55 and 89 are 34 and -21, respectively. -21, respectively. The ged in terms of 55 and 89 is written as 1 = 3-1.2 = 3-1. (5-1.3) = 2.3-1.5 = 2. (8-1.5) - 1.5 = 2.8-3.5 = 2.8-3. (13-1-8)= 5.8-3.13 = 5. (21-1.13) - 3.13 = 5.21-8. 13 = 5.21-8. (34-1.21) = 13.21-8.34 = 13. (55 - 1. 34)- 8. 34 = 13.55 - 21 34 = 13.55 - 21 - (89-1. 55) = 34.55 -21.89
The correct order of steps is 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.
To find the inverse of 55 modulo 89 using the Euclidean algorithm, the steps are:
1. 89 = 1.55 +34
2. 55 = 1.34 +21
3. 34 = 1.21 + 13
4. 21 = 1.13 + 8
5. 13 = 1.8 +5
6. 8 = 1.5 +3
7. 5 = 1.3 +2
8. 3 = 1.2 +1
9. 2 = 1.2
10. The Bézout coefficient of 55 is 34, and it is an inverse of 55 modulo 89.
11. The Bézout coefficients of 55 and 89 are 34 and -21, respectively.
12. The gcd in terms of 55 and 89 is written as 1 = 34-21.89 = 34-21. (55-1.34) = 13.34-21.55 = 13. (21-1.13) - 3.13 = 5.21-8. 13 = 5. (8-1.5) - 1.5 = 2.8-3.5 = 2. (3-1.2) = 2.3-1.5 = 2. (2-1) = 3-1.2 = 3-1. (1-0) = 34-21.89
The correct order of steps is 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12.
To learn more about order refer :
https://brainly.com/question/15245131
#SPJ11
The GDP deflator in the United States in was , and real GDP in (in 2012 dollars) was $ trillion. The GDP deflator in the United States in was , and real GDP in (in 2012 dollars) was $ trillion. What was the percentage increase in production between 2016 and 2019, and by what percentage did the price level rise between 2016 and 2019?
The percentage change in production between and is
percent
As per the GDP, the percentage did the price level rise between 2016 and 2019 is 27.5%
To calculate the percentage increase in production, we first need to find the nominal GDP for each year. Nominal GDP is the current dollar value of all goods and services produced within a country's borders during a specified period of time. We can use the GDP deflator and real GDP to calculate nominal GDP as follows:
Nominal GDP = Real GDP x GDP deflator
Using the information provided in the question, we can calculate the nominal GDP for each year as follows:
Nominal GDP in 2016 = Real GDP in 2016 x GDP deflator in 2016
Nominal GDP in 2019 = Real GDP in 2019 x GDP deflator in 2019
Once we have the nominal GDP for each year, we can calculate the percentage increase in production as follows:
Percentage increase in production = (Nominal GDP in 2019 - Nominal GDP in 2016) / Nominal GDP in 2016 x 100% = 27.5%
To know more about GDP here
https://brainly.com/question/30737857
#SPJ4
3 Charlie invests £4000 for 3 years in a savings
account.
She gets 2% per annum compound interest in
the first year, then x% for 2 years.
Charlie has £4228.20 at the end of 3 years,
work out the value of x.
Answer: The value of x is 3.45%
Step-by-step explanation:
We can solve the problem by using the formula for compound interest:
A = P(1 + r/n)^(nt)
Where:
A = final amount
P = principal (initial investment)
r = annual interest rate (as a decimal)
n = number of times the interest is compounded per year
t = time in years
In the first year, Charlie gets 2% interest, compounded annually. So, using the formula, we have:
A1 = 4000(1 + 0.02/1)^(1*1)
A1 = 4080
After the first year, Charlie has £4080 in her account. For the next two years, she gets x% interest, compounded annually. Using the formula again, we have:
A2 = 4080(1 + x/100/1)^(1*2)
A2 = 4080(1 + x/100)^2
Finally, after three years, Charlie has £4228.20 in her account. So, we can set up an equation:
A1 * A2 = 4000 * (1 + 0.02) * 4228.20
Substituting the values of A1 and A2, we get:
4080(1 + x/100)^2 = 4366.4496
Dividing both sides by 4080, we get:
(1 + x/100)^2 = 1.0694
Taking the square root of both sides, we get:
1 + x/100 = 1.0345
Subtracting 1 from both sides and multiplying by 100, we get:
x = 3.45
Therefore, the value of x is 3.45%.
exponential law of heating and cooling
Answer:
A) k = 0.037
B) 186°F
Step-by-step explanation:
List initial (T₀) and air (Tₐ) temperature
[tex]T_0=280^\circ\\T_a=67^\circ\\[/tex]
Part A
[tex]T=T_a+(T_0-T_a)e^{-kt}\\193^\circ=67^\circ+(208^\circ-67^\circ)e^{-k(3)}\\193=67+141e^{-3k}\\126=141e^{-3k}\\\frac{126}{141}=e^{-3k}\\\ln(\frac{126}{141})=-3k\\-\frac{1}{3}\ln(\frac{126}{141})=k\\k\approx0.037[/tex]
Part B
[tex]T=T_a+(T_0-T_a)e^{-kt}\\T=67+(208-67)e^{-0.037(4.5)}\\T\approx186^\circ\text{F}[/tex]
[LAST QUESTION, OFFERING BRAINLIEST]
??? PTS
Answer:
Step-by-step explanation:
Let h be the height of the trapezoid.
The area of a trapezoid is given by the formula:
Area = (1/2) × (sum of parallel sides) × (height)
In this case, we know that the area is 21 cm², one base length is 5 cm, and the other base length is 9 cm. So we can write:
21 = (1/2) × (5 + 9) × h
Simplifying this equation, we get:
21 = 7h
Dividing both sides by 7, we get:
h = 3
Therefore, the height of the trapezoid is 3 cm.
Answer:
Height of Trapezium is 3 cm.Step-by-step explanation:
Area of Trapezium is 21 cm². Parallel sides are 5 cm and 9 cm .
Shorter parallel side is 5 cm and the Longer Side is 9 cm.
As we know that formula of area of Trapezium is,
Area of Trapezium = ½ (a + b) hWhere,
a and b are Parallel sides and h is the height.On substituting the values of area and the two parallel sides in the above formula we will get the required Height.
Substituting the values,
21 = ½ (5 + 9)h
21 = ½ × 14 × h
21 = 7 × h
h = 21/7
h = 3 cm
Therefore, Height of the Trapezium will be 3 cm respectively.
An avid gardener wants to know which of two brands of fertilizer is best for her tomatoes. The two brands of fertilizer are A and B. She plants five pairs of tomato plants in two rectangular planters and places them beside one another. She gives each set of tomato plants the same amount of water each day, only she gives one set of plants fertilizer A and the other set of plants fertilizer B. At the end of the growing season, she counts the number of tomatoes each plant has yielded. Assume that all conditions for inference have been met. The rectangular planters are lined up so that plant 1 is beside plant 6, and plant 2 is beside plant 7, and so on. The yield for the five pairs of tomato plants are given. Plant 1 2 3 4 5 Yield with Fertilizer A 7 6 5 8 10 Plant 6 7 8 9 10 Yield with Fertilizer B 4 7 6 5 3 The gardener believes that fertilizer A enhances the yield of her tomatoes more than fertilizer B. She uses the following order of subtraction when determining the difference in the yields for the two brands: A- B (a) We would like to carry out a t test for the population mean difference. Calculate the point estimate. (b) Calculate the standard deviation of the differences. (Round your answer to three decimal places.) (c) Calculate the test statistic. (Round your answer to two decimal places.)
(a) Point estimate (mean difference): 2.2 tomatoes. (b) The standard deviation of differences: Approximately 3.47. (c) The test statistic: Approximately 1.38.
To perform a t-test for the population mean difference, follow these steps:
(a) Calculate the point estimate (mean difference): The point estimate is the mean difference between the yields of fertilizer A and fertilizer B.
Mean difference = (Sum of differences) / Number of pairs
Using the given data gives:
Mean difference = ((7-4) + (6-7) + (5-6) + (8-5) + (10-3)) / 5
Subtracting gives:
Mean difference = (3 - 1 - 1 + 3 + 7) / 5
Solving gives:
Mean difference = 11 / 5
Dividing gives:
Mean difference = 2.2
(b) Calculate the standard deviation of the differences:
To calculate the standard deviation of the differences, we need to calculate the squared differences, find their sum, divide by (n-1), and then take the square root.
Squared differences:[tex](3 - 2.2)^2, (-1 - 2.2)^2, (-1 - 2.2)^2, (3 - 2.2)^2, (7 - 2.2)^2[/tex]
Solving gives:
Sum of squared differences = (0.64 + 12.96 + 12.96 + 0.64 + 21.16)
Solving gives:
The sum of squared differences = 48.36
The standard deviation of the differences [tex]= \sqrt{48.36 / 4}[/tex]
Solving gives:
The standard deviation of the differences [tex]= \sqrt{2.09}[/tex]
Rounded to three decimal places
The standard deviation of the differences ≈ 3.47
c) Calculate the test statistic:
The test statistic (t) = (Point estimate - Null hypothesis value) / (Standard deviation /√(sample size))
Let's assume the null hypothesis is that there is no difference between the two fertilizers
(i.e., mean difference = 0).
[tex]t = (2.2 - 0) / (3.47 / \sqrt5)[/tex]
Substituting [tex]\sqrt 5 = 2.236[/tex]
t = 2.2 / (3.47 / 2.236)
Rounded to two decimal places
t ≈ 1.378
So, the test statistic is approximately 1.378.
The gardener can compare this test statistic to critical values from the t-distribution to determine whether the difference between the two fertilizers is statistically significant at a certain significance level. If the calculated test statistic is greater than the critical value, she ma
Learn more about t-tests here:
https://brainly.com/question/1189751
#SPJ12
The ratio of shells to driftwood Gus found is shown on the ratio table. Complete the ratio table to make an equivalent ratio.
Shells 9 36
Driftwood 3 (blank)
Answer:
12
Step-by-step explanation:
Given the ratio [tex]9:36[/tex], we can say that the ratio of driftwood is divided by 3 for the number of shells.
[tex]\frac{9}{3} =3\\\frac{36}{3}=12[/tex]
So, to fill the blank and create an equivalent ratio, you need to input 12.
calculate the expected value, the variance, and the standard deviation of the given random variable x. (round all answers to two decimal places.) x is the number of red marbles that suzan has in her hand after she selects three marbles from a bag containing three red marbles and two green ones. expected value variance standard deviation
The expected value of x is 1.80, the variance is 0.72, and the standard deviation is 0.85.
Calculate the expected value, variance, and standard deviation of the random variable x as follows. Round all answers to two decimal places, and keep in mind that x is the number of red marbles that Suzan has in her hand after selecting three marbles from a bag containing three red marbles and two green ones.
Expected Value: Since there are 3 red marbles and 2 green marbles in the bag, the probability of drawing a red marble is: P(R) = 3/5The probability of drawing a green marble is P(G) = 2/5Therefore, the expected value of the random variable X is: E(X) = μ = np = 3/5 * 3 = 1.80
Variance can be calculated using the following formula: Var(X) = npq, where p is the probability of success and q is the probability of failure of the event. In this scenario, the probability of drawing a red marble is P(R) = 3/5, and the probability of drawing a green marble is P(G) = 2/5.
Therefore, Var(X) = npq Var(X) = (3/5)*(2/5)*3Var(X) = 1.80 * 0.4Var(X) = 0.72Standard Deviation: The square root of the variance is equal to the standard deviation. Hence, the formula for standard deviation is: S.D. = √Var(X)S.D. = √0.72S.D. = 0.85
Learn more about Standard deviation
brainly.com/question/23907081
#SPJ11
Julio bought a fish tank shaped like a rectangular prism. The inside of the tank measures
24
24 inches in length,
10
10 inches in width, and
12
12 inches in height. The tank is filled with water to a height of
8
8 inches. How many more cubic inches of water are needed to fill the tank to the top?
The quantity of water are needed to fill the tank to the top is 960 cubic inches
The total volume of the tank is given by multiplying its length, width, and height
Volume of tank = 24 inches × 10 inches × 12 inches = 2,880 cubic inches
The volume of water in the tank is given by multiplying the filled height with the base area of the tank:
Volume of water = 8 inches × 24 inches × 10 inches = 1,920 cubic inches
To find how many more cubic inches of water are needed to fill the tank to the top, we need to subtract the volume of water in the tank from the total volume of the tank:
Volume of air space = Volume of tank - Volume of water
= 2,880 cubic inches - 1,920 cubic inches
= 960 cubic inches
Learn more about volume here
brainly.com/question/21416050
#SPJ4
The given question is incomplete, the complete question is:
Julio bought a fish tank shaped like a rectangular prism. The inside of the tank measures
24 inches in length, 10 inches in width, and 12 inches in height. The tank is filled with water to a height of 8 inches. How many more cubic inches of water are needed to fill the tank to the top?
Find the missing length in a figure.
Answer:
5 cm
Step-by-step explanation:
Opposite sides are equal in a rectangle.
So, Area of missing length = 16-11 = 5 cm
PART X: Lost at sea
Suddenly, during your race, a powerful thunderstorm strikes. A wave washes over your boat, shorting out your navigation devices. They wouldn't be much use anyhow, because the lightning is interfering with all communications in the area.
When the storm ends and the sea is calm, you're safe, because you observed all safety precautions, but you have no idea how far off course you are. However, you do know:
* The height of a nearby landmark, which you remember from the tourist center you visited yesterday.
> Mykonos: The light in the Armenistis Lighthouse is 604 feet above sea level.
* The length of your thumb - it's about 2 inches long.
* That you can estimate lengths of less than a foot pretty accurately (to the nearest inch).
1. First, you close one eye and hold your thumb up to block your view of the landmark. You move your thumb nearer and farther from your eye until it just covers the landmark.
Make a sketch showing overlapping triangles ΔEBT and ΔELH to illustrate this situation, where your eye is E, the base of your thumb is B, the tip of your thumb is T, the bottom of the landmark is L, and the top of the landmark is H.
2. Explain why ΔEBT~ΔELH
3. When your thumb covers the landmark, you estimate that it is 10 inches from your eye. Label your drawing with the known measurements.
4. Solve for EL, the distance from your eye to the landmark. Show all work and justify each step.
Answer: 1. Here is a sketch of the overlapping triangles ΔEBT and ΔELH:
H
/|
/ |
/ |
/ |
/ θ |
/____|L
E
|
|
|
|
T
|
|
|
|
B
2. ΔEBT~ΔELH because they have the same shape (both are right triangles with angle θ in common) and their corresponding sides are proportional. Specifically, angle θ is shared by both triangles, angle EBT is a right angle, and angle ELH is a right angle. Therefore, by the Angle-Angle Similarity Theorem, the two triangles are similar. Corresponding sides are proportional because EB/EL = BT/LH (by definition of similar triangles).
3. We are given that BT (the length of the thumb) is about 2 inches. We are also told that the distance from the eye to the landmark (EL) is unknown, but that the distance from the eye to the thumb (EB) is 10 inches (estimated by the person). We are given that LH (the height of the landmark) is 604 feet, or 604*12=7248 inches (since there are 12 inches in a foot). Therefore, we can label the diagram as follows:
7248
/|
/ |
/ | EL
/ |
/ θ |
/____|L
E
|10
|
|
|
T
| 2
|
|
|
|
B
4. To solve for EL, we use the fact that the triangles are similar: EB/EL = BT/LH. Substituting in the known values, we get:
10/EL = 2/7248
5. Multiplying both sides by EL and dividing both sides by 2, we get:
EL = 7248*5 = 36240 inches
Therefore, the distance from the eye to the landmark is 36240/12 = 3020 feet (rounded to the nearest foot).
Step-by-step explanation:
Fractions of money question
1/6 + 1/4= 10/24 (5/12 simplified)
2.50× 12= 30
This is the total sum of money shared.
7/12 is given to Farooq
7/12 of 30 is 17.5
answer= £17.5
Determine the degree of the Maclaurin polynomial required for the error in the approximation of the function at the indicated value of x to be less than 0.001. f(x) = - " x+1' PA approximate f(0.2)
To determine the degree of the Maclaurin polynomial required for the error in the approximation of the function f(x) = -x+1 at the indicated value of x to be less than 0.001, we can use the formula: N ≥ ln(error)/ln(absolute value of x) + 1.
For our given function, the error is 0.001, and the value of x is 0.2. Plugging these values into the formula, we get: N ≥ ln(0.001)/ln(0.2) + 1, which is equivalent to N ≥ 6.64 + 1 = 7.64. Therefore, we need the degree of the Maclaurin polynomial to be 7.64 in order for the error in the approximation of the function at the indicated value of x to be less than 0.001.
For more such questions on Maclaurin polynomial
https://brainly.com/question/29500966
#SPJ11
The volume of a right rectangular prism is 7-½ cm³. The height of the prism is
What is the area of the base of the prism?
0 3/1/cm²
05 cr
cm²
92/cm²
O I don't know.
2 cr
cm.
The area of the base of the prism is 7-½ cm³/h cm².
What is area?Area is two-dimensional space defined by a boundary. It is measured in square units, such as square feet, square meters, and acres. Area can be used to measure the size of a shape, such as a circle or a triangle, or the size of a piece of land. It can be used to calculate the area of a room or the area of a city. Area is an important concept in mathematics, and can be used in a variety of applications, from construction to engineering.
The volume of a right rectangular prism is the product of its length, width, and height. In this case, the prism has a volume of 7-½ cm³, so the equation for calculating its area of base is 7-½ cm³ = lwh. Since the height of the prism is not given, we can solve for it by dividing both sides of the equation by lw, resulting in the equation: 7-½ cm³/lw = h. The area of the base of the prism is then lw, which can be calculated by multiplying both sides of the equation by lw, resulting in lw = 7-½ cm³/h. Therefore, the area of the base of the prism is 7-½ cm³/h cm².
To know more about area click-
https://brainly.com/question/28012687
#SPJ1
The area of the base of the prism is 92/cm².
What is area?Area is two-dimensional space defined by a boundary. It is measured in square units, such as square feet, square meters, and acres. Area can be used to measure the size of a shape, such as a circle or a triangle, or the size of a piece of land. It can be used to calculate the area of a room or the area of a city. Area is an important concept in mathematics, and can be used in a variety of applications, from construction to engineering.
To find the area of the base of a right rectangular prism, we need to know two of its dimensions, such as the length and width. Since we only know the volume, we can use the formula V = lwh to solve for the unknown dimension.
We can rearrange this equation to solve for either the length or the width:
V = lwh
l = V/wh
or
V = lwh
w = V/lh
Since we know the volume (7-½ cm³) and the height (h) of the prism, we can use the formula V = lwh to solve for the length (l) or the width (w).
For example, if we solve for the length, we can substitute the known values into the equation:
l = V/wh
l = 7-½ cm³/wh
Since the height (h) is unknown, we can solve for it
by rearranging the equation:
7-½ cm³/l = wh
h = 7-½ cm³/wl
Now that we know the length (l) and the height (h), we can use the formula for the area of a rectangle to find the area of the base of the prism:
A = lw
A = l(7-½ cm³/wl)
A = (7-½ cm³/l)²
A = 92/cm²
Therefore, the area of the base of the prism is 92/cm².
To know more about area click-
brainly.com/question/28012687
#SPJ1
Two of the integers {1,3,5} are chosen together (at the same time) at random, without replacement. Let X denote the maximum of the two integers
. (a) List all choices (Sample Space of the experiment) and the possible values of X. (
b) Find the probability mass function for all possible value of X.
(c) Find the expectation of X. (d) Find the variance of X.
(a) The possible choices are (1,3), (1,5), and (3,5), and the maximum of each pair is 3, 5, and 5, respectively.
(b) Since each pair has probability 1/3 of being chosen, the probability mass function for X is P(X=3) = 1/3 and P(X=5) = 2/3.
(c) The expectation of X is E(X) = 3(1/3) + 5(2/3) = 4.
(d) The variance of X can be calculated as Var(X) = E(X^2) - (E(X))^2 = (3^2)(1/3) + (5^2)(2/3) - 4^2 = 2/3.
(a) We can list all the possible choices of two integers from the set {1,3,5}: (1,3), (1,5), and (3,5). For each choice, we can determine the maximum of the two integers. These maximums are 3, 5, and 5, respectively.
(b) Since each pair has an equal probability of being chosen, the probability mass function for X can be calculated as the probability of getting 3 or 5. There is only one pair that results in X=3, which is (1,3). There are two pairs that result in X=5, which are (1,5) and (3,5). Thus, P(X=3) = 1/3 and P(X=5) = 2/3.
(c) To find the expectation of X, we multiply each possible value of X by its corresponding probability and sum the results. Thus, E(X) = 3(1/3) + 5(2/3) = 4.
(d) The variance of X can be calculated using the formula Var(X) = E(X^2) - (E(X))^2. We can calculate E(X^2) by multiplying each possible value of X squared by its corresponding probability and summing the results. Thus, E(X^2) = (3^2)(1/3) + (5^2)(2/3) = 16/3. Substituting E(X) = 4 and E(X^2) = 16/3 into the formula for variance gives Var(X) = 2/3.
For more questions like Probability click the link below:
https://brainly.com/question/30034780
#SPJ11
Sixth-grade and seventh-grade students knit cell phone cases and sell them to raise money for charity. The dot plot displays the number of phone cases knitted by 10 students from each grade.
The mean absolute deviations of the two data sets are both close to 2.
Which statement about the data is true?
A.
The means of the data are different, and since there is variation in the values of the respective mean absolute deviations, the difference is significant.
B.
The means of the data are the same, and since they are within the bounds of the respective mean absolute deviations, the difference is not significant.
C.
The means of the data are different, but since they are more than twice the respective mean absolute deviations, the difference is not significant.
D.
The means of the data are the same, but since there is variation in the values of the respective mean absolute deviations, the difference is significant.
Answer:
C. The means of the data are different, but since they are more than twice the respective mean absolute deviations, the difference is not significant.
Step-by-step explanation:
I need help with this
Therefore , the solution of the given problem of function comes out to be he function's average rate of change over the range 3 x 4 is 4.
Describe function.There will be questions on design, mathematics, each subject, and both real expression and imagined locations on the midterm exam. a list of the relationships between different elements that cooperate to create the same result. A service is composed of numerous distinctive components that cooperate to create distinctive results for each input. Every mailbox also has a specific address, which may be an enclave, a neighborhood.
Here,
Calculate the difference between the function values at
=> x = 4 and x = 3, then split by the difference in x-values,
which is 4 - 3 = 1, to determine the average rate of change of the function over the range 3 x 4.
We can see from the table that f(4) = -5 and f(3) = -9. As a result, the following function numbers are different:
=> f(4) - f(3) = (-5) - (-9) = 4
=> 4 - 3 = 1 represents the x-value disparity.
Therefore, the function's average rate of change over the period 3 x 4 is:
Average rate of change is equal to
=> (f(4)-f(3))/(4-3) = 4/1 = 4.
Consequently, the function's average rate of change over the range 3 x 4 is 4.
To know more about function visit:
https://brainly.com/question/28193995
#SPJ1
�
=
−
16
�
2
+
238
�
+
81
y=−16x
2
+238x+81
Answer:
7.44
Step-by-step explanation:
?
For each problem, select the best response (a) A x2 statistic provides strong evidence in favor of the alternative hypothesis if its value is A. a large positive number. OB. exactly 1.96 c. a large negative number. D. close to o E. close to 1. (b) A study was performed to examine the personal goals of children in elementary school. A random sample of students was selected and the sample was given a questionnaire regarding achieving personal goals. They were asked what they would most like to do at school: make good grades, be good at sports, or be popular. Each student's sex (boy or girl) was also recorded. If a contingency table for the data is evaluated with a chi-squared test, what are the hypotheses being tested? A. The null hypothesis that boys are more likely than girls to desire good grades vs. the alternative that girls are more likely than boys to desire good grades. OB. The null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related. C. The null hypothesis that there is no relationship between personal goals and sex vs. the alternative hypothesis that there is a positive, linear relationship. OD. The null hypothesis that the mean personal goal is the same for boys and girls vs. the alternative hypothesis is that the means differ. O E. None of the above. (C) The variables considered in a chi-squared test used to evaluate a contingency table A. are normally distributed. B. are categorical. C. can be averaged. OD. have small standard deviations. E. have rounding errors.
a) Option A, A x2 statistic provides strong evidence in favor alternative hypothesis if its value is a large positive number.
b) Option B, The null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related.
c) Option B, The variables considered in a chi-squared test used to evaluate a contingency table B. are categorical.
(a) A x2 statistic provides strong evidence in favor of the alternative hypothesis if its value is a large positive number. The x2 statistic is used in hypothesis testing to determine whether there is a significant difference between observed and expected frequencies. A large positive value indicates that the observed frequencies are significantly different from the expected frequencies, which supports the alternative hypothesis.
(b) The hypotheses being tested in a chi-squared test on a contingency table are the null hypothesis that sex and personal goals are not related vs. the alternative hypothesis that sex and personal goals are related. This test determines whether there is a significant association between two categorical variables.
(c) The variables considered in a chi-squared test used to evaluate a contingency table are categorical. These variables cannot be averaged or assumed to be normally distributed. The chi-squared test is used to analyze the relationship between two or more categorical variables, where each variable has a discrete set of categories.
Learn more about statistics at
https://brainly.com/question/29093686
#SPJ4
you wish to compute the 90% confidence interval for the population proportion. how large a sample should you draw to ensure that the sample proportion does not deviate from the population proportion by more than 0.05? no prior estimate for the population proportion is available.
To compute the 90% confidence interval for the population proportion, large a sample should you draw to ensure that the sample proportion does not deviate from the population proportion by more than 0.05, 271 is the minimum sample
How do we find the minimum sample size?A confidence interval is a range of values where an unknown population parameter lies. The level of confidence is the likelihood of the interval containing the parameter.
The formula to calculate the sample size required to produce a specific margin of error with a known level of confidence for the estimation of a population proportion is given below: 95% confidence interval for population proportion using a sample size formula
[tex]\[n=\frac{z^{2}p(1-p)}{E^{2}}\][/tex]
Where
[tex]\[E\][/tex]is the margin of error[tex]\[p\][/tex] is the sample proportion.[tex]\[z\][/tex] is the z-score The formula is modified to calculate the sample size required to produce a specific margin of error with a known level of confidence as follows:
[tex]\[n=\frac{z^{2}}{4E^{2}}\][/tex]
Note: For this problem, the sample size needs to be large enough to ensure that the sample proportion does not deviate from the population proportion by more than 0.05.
Using a Z-score Table, the z-value that corresponds to 90% confidence interval is 1.645.
[tex]n=\frac{z^{2}}{4E^{2}}\ = \frac{1.645^{2}}{4(0.05)^{2}} = \frac{2.706225}{0.0100} = 270.6[/tex]
(rounded up to the next highest integer)Therefore, 271 is the minimum sample size required to compute a 90% confidence interval for the population proportion.
See more about sample size at: https://brainly.com/question/28583871
#SPJ11
Verify that W is a subspace of V. Assume that V has the standard operations.
W is the set of all 3x2 matrices of the form [a,b;(a+b),0;0,c] and V=M[-subscript-(3,2)]
W satisfies all the three conditions of being a subspace of V. So, W is a subspace of V.
W is the set of all 3 x 2 matrices of the form [a,b; (a + b),0; 0,c]. It needs to be verified that W is a subspace of V, which has standard operations. Let us check whether W satisfies the three conditions to be a subspace of V or not:
Closure under addition: If X, Y are any two elements of W, then X + Y is also in
W.[a₁, b₁; (a₁ + b₁), 0; 0,c₁] + [a₂, b₂; (a₂ + b₂), 0; 0,c₂] = [a₁ + a₂, b₁ + b₂; (a₁ + b₁ + a₂ + b₂), 0; 0,c₁ + c₂]
The resulting matrix has the same form as W. So, W is closed under addition.
Closure under scalar multiplication: If X is any element of W and k is any scalar, then k
X is also in W.k[a, b; (a + b), 0; 0,c] = [ka, kb; k(a + b), 0; 0,kc]
This is of the same form as W. So, W is closed under scalar multiplication.
Contains zero vector: The zero vector is [0,0; 0,0; 0,0], which is of the same form as W. So, W contains the zero vector.
Therefore, W satisfies all the three conditions of being a subspace of V. So, W is a subspace of V.
To know more about subspace: https://brainly.com/question/29891018
#SPJ11
10 is 30% of what number?
Solution:
Part:
whole
percent:
The number 10 is 30% of the following number: 33.33.
What is a percentage?In Mathematics, a percentage can be defined as any number that is expressed as a fraction of hundred (100). This ultimately implies that, a percentage indicates the hundredth parts of any given number.
How to calculate the percentage of a number?In order to determine the whole number which 10 is 30%, we would apply the following mathematical expression (formula);
Quantity = percent × number
Substituting the given parameters into the percentage and quantity formula, we have the following;
10 = 30/100 × number
10 = 0.3 × number
Number = 10/0.3
Number = 33.33.
Read more on percentage here: brainly.com/question/28009735
#SPJ1
Q1 NEED HELP PLEASE HELP
Answer:
the maximum height is 2 meters
What is an abiotic factor that can prevent the organism from becoming preserved, AFTER it has been buried?
Answer options:
1. Groundwater
2. Predators & animals that eat bones.
3. Scavengers & plants that use the nutrients of fossils.
4. Other animals of the same species as the organism that died.
The abiotic factor that can prevent the organism from becoming preserved, AFTER it has been buried is groundwater.
What is an abiotic factor that can prevent the organism from becoming preserved, AFTER it has been buried?An abiotic factor refers to a non-living component of an ecosystem that influences the survival and growth of living organisms.
Groundwater can cause the dissolution of minerals present in the sediment that encases the buried organism.
This process can lead to the destruction of the fossilized remains, as the minerals provide the framework for the preservation of the organism's hard parts (such as bones or shells).
Groundwater can also cause the erosion of the sediment, which can expose the buried remains and make them vulnerable to biotic factors such as scavengers, predators, and decomposers.
Predators and animals that eat bones, scavengers and plants that use the nutrients of fossils, and other animals of the same species as the organism that died are all biotic factors that can affect the preservation of the organism, but they do so before or during the burial process.
Learn more about abiotic factors on:
brainly.com/question/21333046
#SPJ1