The african cicada is the world's loudest insect, producing a sound intensity level of 107 db at a distance of 0. 50 m.

If m1 < m2, then Ï1 < Ï2

The angle between the thread and the vertical (Ï) is determined by the ratio of the weight of the balloon to the electrostatic force on the balloon, which is proportional to the amount of charge on the balloon.

If two balloons have different masses but are charged to the same amount, the heavier balloon will experience a larger gravitational force, and the angle between its thread and the vertical will be smaller. In this case, if m1 < m2, then Ï1 < Ï2.

To know more about the charged balloon , visit1;

https://brainly.com/question/30466811

#SPJ4

The ratio is k: d= 1 : 3

From the question, we are told that

The first minimum of the single-slit pattern falls on the fifth maximum of the double-slit pattern.

Generally, the condition for constructive interference for a single slit is  

ksin(θ) = nλ

Here  k is the width of the slit  and n is the order of the fringe and for a single slit n =  1 (cause we are considering the first maxima)

Generally, the condition for constructive interference for a double slit is    

ksin(θ) = mλ

Here  d is the separation between the  slit  and m is the order of the fringe and for the double slit m  =  5

dsinθ = 5λ

so,

ksin(θ)/ dsin(θ) = λ/5λ  

=

so, k : d= 1 : 3

Hence k: d= 1 : 3 is the correct answer.

To know more about Ratio follow the link:

https://brainly.com/question/18956877

#SPJ4

The total force on the object is 12 Newtons. The answer is (c).

The upward force you exert on the object is 22 Newtons, and it acts in the upward direction. The downward force of gravity on the object is 10 Newtons, and it acts in the downward direction. The total force on the object is the vector sum of these two forces.

Since the upward force and the downward force act in opposite directions, we can find the total force by subtracting the magnitude of the downward force from the magnitude of the upward force,

Total force = Upward force - Downward force

Total force = 22 N - 10 N

Total force = 12 N

To know more about the force, here

https://brainly.com/question/30630945

#SPJ4

Trackers can growth a PV system's production via up to 40% greater than a fixed-tilt array by using retaining consistent direct daylight exposure to the module. The range of the project and the form of tracker determine the quantity of productivity development over a fixed gadget.

A PV (photovoltaic) system is a type of renewable energy system that converts sunlight into electricity using solar panels. The solar panels are typically made of silicon cells that absorb the energy from the sun and convert it into direct current (DC) electricity. This DC electricity is then converted into alternating current (AC) electricity using an inverter, which can be used to power homes, businesses, and other electrical devices.

PV systems can be designed to be grid-tied, off-grid, or hybrid. Grid-tied systems are connected to the utility grid and allow excess electricity to be sold back to the utility company. Off-grid systems are independent of the utility grid and use battery storage to provide electricity when the sun is not shining. Hybrid systems combine both grid-tied and off-grid components to provide reliable power even in the event of a power outage.

To learn more about PV system's visit here:

brainly.com/question/28222743

#SPJ4

Complete Question: -

Explain the relationship between the tracking ability of a solar PV system and its energy production. Simulated energy production for one kilowatt of solar PV capacity in Los Angeles, Calif. hourly average production by season, watthours

800

700

600

500

400

300

200

100

0

4 8 12 16 20 p 4 8 12 16 20 4 8 12 16 20

winter

summer

spring

(Mar-May)

(Dec-Feb)

(Jun-Aug)

Adnun

PV array facing south at fixed tilt

4 8 12 16 20

fall

(Sep-Nov)

Aion Axis of rotation

2

One axis tracking PV array

with axis oriented south.

tracking.

dual-axis

tracking.

single-axis

afted south

no tracking.

sited south

no tracking.

fat

Axis of rotation

Two-axis tracking PV array

ela

RPM (revolutions per minute) is 31.42 radians per second  

To convert from RPM (revolutions per minute) to rad/s (radians per second), you can use the following conversion formula:

rad/s = RPM x (2π/60)

where 2π represents the number of radians in a full circle, and 60 represents the number of seconds in a minute.

Revolutions Per Minute is the acronym for this term. It involves figuring out how frequently an object rotates, or how many revolutions or turns it makes each minute. It illustrated how frequently an involuntary component spins around its axis in a minute. RPM, then, is the frequency or speed of an involuntary object's rotation about a fixed axis, such as the crankshaft of an engine, a turbine power generator, a DVD or CD player, or a turbocharger.

Here's an example:

If you have an object rotating at 300 RPM, you can find its angular velocity in radians per second as follows:

rad/s = 300 x (2π/60) = 31.42 rad/s

The angular velocity of the object is 31.42 radians per second.

To learn more about radians per second   :

https://brainly.com/question/29076790

#SPJ4

To tune this string properly, 357.21 N force of tension is required.

Frequency is the number of waves that pass a specific area in a defined amount of time. As a result, the frequency is 2 per second if a wave travels through in half a second. If it takes 1/100 of an hour, the frequency is 100 times per hour.

To calculate the tension needed to tune the string,

we can use the formula:

Tension = (frequency × wavelength)² × mass / (4 ×length) where:

frequency is the lowest note frequency, which is 27.5 Hz

wavelength is the length of the vibrating section, which is 1.90 m

mass is the mass of the string, which is 400 g (or 0.4 kg)

length is the total length of the string, which is 2.00 m

When the values are added to the formula, we obtain: Tension = (27.5 Hz × 1.90 m)² × 0.4 kg / (4 × 2.00 m)

= 357.21 N

To know more about  force visit:-

https://brainly.com/question/13191643

#SPJ4

Question:

The lowest note on a grand piano has a frequency of 27.5 Hz. The entire string is 2.00 m long and has a mass of 400 g. The vibrating section of the string is 1.90 m long. What tension is needed to tune this string properly?

The correct statements include:

option A, B, C, D

The Incorrect statements include:

Different types of electromagnetic radiation are fundamentally different types of waves. (All types of electromagnetic radiation are fundamentally the same type of wave but have different frequencies and wavelengths.)

The only type of electromagnetic radiation that is actually considered light is visible light. (All types of electromagnetic radiation are considered light, including radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.)

Learn more about electromagnetic waves here: https://brainly.com/question/25847009

#SPJ1

Answer: A B C D

Explanation: k12 I had this quiz

The lack of apparent motion of the stars is due to the vast distances involved, and not to any shortcomings in the observation techniques or instruments used such as stellar parallax.

Stellar parallax is the apparent shift in the position of a nearby star relative to more distant background stars as observed from Earth, caused by the Earth's orbit around the sun. In other words, as the Earth moves in its orbit around the sun, the perspective from which we view nearby stars changes, causing those stars to appear to move slightly against the more distant background stars.

The amount of this apparent shift is directly proportional to the distance of the star from the Earth. The closer the star, the greater the parallax. By measuring the parallax of a star, astronomers can determine its distance from the Earth with a high degree of accuracy.

Stellar parallax provides one of the most direct and reliable methods for determining the distances to nearby stars and is a key tool in the study of the structure and evolution of the Milky Way galaxy and the universe as a whole.

The most likely reason for the apparent lack of motion of the stars is due to the great distances between Earth and the stars. Stellar parallax is the apparent shift in the position of a star as observed from two different points in Earth's orbit, such as from opposite sides of the Earth's orbit around the sun. This apparent shift is caused by the change in the observer's perspective as the Earth moves.

To know more about Stellar Parallax, visit:

https://brainly.com/question/14315796

#SPJ4

Answer:

The total kinetic energy of the car can be divided into two parts: translational kinetic energy, due to the car's motion as a whole, and rotational kinetic energy, due to the rotation of the wheels about their axles.

The translational kinetic energy of the car is given by:

KE_translational = (1/2)mv^2

where m is the mass of the car and v is its speed.

The rotational kinetic energy of each wheel can be calculated as:

KE_rotational = (1/2)Iω^2

where I is the moment of inertia of a wheel and ω is its angular velocity.

The moment of inertia of a uniform disk is given by:

I = (1/2)mr^2

where m is the mass of the disk and r is its radius.

The mass of each wheel is given as 12 kg, so the moment of inertia of each wheel is:

I = (1/2)(12 kg)(0.5 m)^2 = 1.5 kg·m^2

Assuming that the wheels are rolling without slipping, the angular velocity of each wheel can be related to the speed of the car by:

v = rω

where r is the radius of the wheel.

Solving for ω, we get:

ω = v/r

Substituting this expression into the equation for KE_rotational, we get:

KE_rotational = (1/2)(1.5 kg·m^2)(v/r)^2

Simplifying, we get:

KE_rotational = (3/8)mv^2

So the rotational kinetic energy of each wheel is (3/8) of the translational kinetic energy of the car.

The total rotational kinetic energy of all four wheels is therefore:

KE_total_rotational = 4 KE_rotational = (3/2)mv^2

The total kinetic energy of the car is:

KE_total = KE_translational + KE_total_rotational = (5/2)mv^2

So the fraction of the total kinetic energy of the car that is due to the rotation of the wheels about their axles is:

KE_total_rotational / KE_total = (3/5) = 0.6

Therefore, 60% of the car's total kinetic energy is due to the rotation of the wheels about their axles.

The true statement is  about the chemical makeup of the weathered rock is "It is different than that of the original rock.

option A.

Chemical weathering is a process that involves the breakdown of rocks and minerals through chemical reactions with the surrounding environment. This process occurs due to the interaction of rock minerals with water, atmospheric gases, and organic acids, which can lead to the breakdown of the mineral structure of the rock.

Chemical weathering involves the breakdown of rocks and minerals through chemical reactions with water, oxygen, and other substances in the environment. As a result of these reactions, the chemical makeup of the weathered rock can be altered, and it may have different physical and chemical properties than the original rock.

Therefore, option A is the correct answer.

Learn more about chemical weathering here: https://brainly.com/question/829782

#SPJ1

Answer:

Height

Explanation:

Amplitude is the height of a wave above the x-axis.

The sound intensity, or sound power, decreases by a factor of nine (9) when the distance to the source triples.

Sound intensity is the rate of energy transfer per unit area and per unit time in the form of sound waves. It can be measured in units of watts per square meter (W/m2). Sound intensity is proportional to the square of the sound pressure level and is inversely proportional to the distance from the source. Sound intensity decreases with increasing distance from the source and increases with the sound pressure level.

This is due to the inverse-square law, which states that the sound intensity decreases inversely proportional to the square of the distance from the source. This means that as the distance from the source increases, the sound intensity decreases by the square of that distance. In this case, when the distance is tripled, the sound intensity decreases by a factor of nine (9).

To learn more about sound intensity
https://brainly.com/question/17062836
#SPJ4

Florida is wet and humid, while California is dry and non-humid. Florida also contains lots of lakes which evaporate to create thunderstorms. Due to Florida's smaller size compared to California, there are more thunderstorms there than in California.

A thunderstorm is often referred to as an electrical storm or a lightning storm. It is defined as a storm characterized by the presence of lightning and its acoustic effect on the Earth's atmosphere, known as thunder. Weak thunderstorms are sometimes called thundershowers.

Some places experience thunderstorms more frequently than others. The state of Florida is smaller than the state of California which is why more thunderstorms occur in Florida than in California.

As Florida is smaller than California, there are therefore more thunderstorms in Florida than in California.

To know more about thunderstorms:

https://brainly.com/question/21786097

#SPJ4

The largest continuous sand desert in the world is the Sahara Desert, located in Northern Africa.

The largest continuous sand desert in the world is the Sahara Desert, located in Northern Africa. It covers an area of about 3.6 million square miles (9.4 million square kilometers) and spans over 11 countries including Algeria, Chad, Egypt, Libya, Mali, Mauritania, Morocco, Niger, Sudan, Tunisia, and Western Sahara.

The Sahara Desert is also the hottest desert in the world, with temperatures reaching over 130°F (54°C) in some areas. It is home to a diverse range of flora and fauna, including many species that have adapted to the harsh desert environment.

To know more about the Sahara Desert, here

brainly.com/question/3906112

#SPJ4

The indicators have a chemical structure that can absorb light( have a color) under certain pH conditions and either change color or come tintless under other pH conditions.

This typically occurs due to a change in protonation of the functional group( special side chain) of the patch. Let's look at an illustration of thymol blue index, C27H30O5S. In the figure, there are three structural comformations that differ in two locales( indicated in red) as to whether there's a bound hydrogen or not. The presence of the hydrogens change the wavelength( s) at which the emulsion absorbs light, so there are different colors associated with each conformation. Each conformation also exists within a given pH range, meaning they change color at a specific pH range or point.

To know more about Indicators, visit: brainly.com/question/29842932

#SPJ4

With an increase in gas volume, the gas's temperature must also rise. Temperature and volume changes result in work and an internal energy shift.

Boiling water into steam or freezing water into ice are two examples of isobaric processes. A gas either expands or contracts during the process to maintain constant pressure, and as a result, the net work done by the system or on the system is determined.

An adiabatic process where no heat is added to or removed from the system. an isobaric process, in which there is no change in the pressure of the system. the system's volume remains constant throughout an isochoric process.

To know more about Isobaric visit:

https://brainly.com/question/14752966

#SPJ4

The AP physics 2 equation sheet is a reference sheet that contains all of the important equations and formulas that are commonly used in the AP physics 2 exam. It is provided to students during the exam, and they are allowed to use it as a reference while answering questions.

The equation sheet includes equations for topics such as electric force, electric potential, electric field, magnetic force, magnetic field, optics, and thermodynamics. It also includes important constants, such as the speed of light and the charge of an electron.

The equation sheet can be found on the College Board website, and it is recommended that students become familiar with it before taking the exam. This will help them to quickly find the equations they need and to use them effectively during the exam.

In conclusion, the AP physics 2 equation sheet is an important resource for students taking the AP physics 2 exam. It contains all of the important equations and formulas that students need to know, and it is provided to them during the exam to use as a reference.

To learn more about equation refer here:

https://brainly.com/question/29657992#

#SPJ11

The probability that the coin will show tails at most once is 0.31.

The probability of any particular outcome is the measure of the likelihood that the outcome will occur. It is usually expressed as a number between 0 and 1 (where 0 shows impossibility and 1 shows certainty). The higher the probability of an event, the more certain that the event will occur. Probability is quantified as a number between 0 and 1, where, loosely speaking, 0 indicates impossibility and 1 indicates certainty. The higher the probability of an event, the more likely it is that the event will occur.

To learn more about probability

https://brainly.com/question/26286787

#SPJ4

The probability that the coin will show tails at most once is 0.31.

How likely a certain outcome is to occur is determined by its probability. Usually, it is indicated by a number between 0 and 1. (where 0 denotes impossible and 1 denotes certainty). The chance of an occurrence increases as its likelihood increases. A number between 0 and 1 is used to represent probability, with 0 generally denoting impossibility and 1 generally denoting certainty. The chance of an occurrence increases as its likelihood increases.

probability that the coin will show tails at most once = P(x = 0) + P(x = 1)

=  0. 06 + 0. 25

= 0.31

To learn more about probability

brainly.com/question/26286787

#SPJ4

Out of the given options, only "Blown car tire" would be considered an emergency fund expense.

An emergency fund expense is an unforeseen and urgent cost that requires immediate attention and cannot be easily covered by one's regular income or savings.

Examples of emergency fund expenses may include unexpected car repairs, medical bills, or sudden job loss. The purpose of an emergency fund is to provide a financial cushion that can help cover these types of expenses, allowing individuals to manage unexpected financial shocks without having to resort to high-interest debt or deplete their long-term savings.

Learn more about emergency fund expense, here:

https://brainly.com/question/30662508

#SPJ1

106 °F is equivalent to 41.11 °C

Temperature conversion from Fahrenheit to Celsius is done using the formula °C = (°F - 32) × 5/9. In this case, we can plug in the given temperature of 106 °F and solve for °C.

Here is the step-by-step process:

1. Subtract 32 from the Fahrenheit temperature: 106 - 32 = 74
2. Multiply the result by 5: 74 × 5 = 370
3. Divide the result by 9: 370 ÷ 9 = 41.11

Therefore, 106 °F is equivalent to 41.11 °C.

To know more about Temperature conversion here:

https://brainly.com/question/19705641#

#SPJ11

The distance between the points (5, 14) and (18, 3) is  17.03 units

distance between two points = [tex]\sqrt{(x2-x1)^{2} +( y2-y1)^{2} }[/tex]

PQ = [tex]\sqrt{(18-5)^{2} +( 3-14)^{2} }[/tex]

PQ = 17.03 units

How do I find the distance between 2 points?

Discover the distance formula, a Pythagorean theorem application, to determine the separation between two places. To get the separation between any two points, we may rewrite the Pythagorean theorem as d=((x 2-x 1)2+(y 2-y 1)2).

Hence 17.03 units is a correct answer.

To know more about similar question follow link

https://brainly.com/question/30419540

#SPJ4

that the electrons are being emitted one at a time. This is known as the single-electron or single-particle interference experiment.

what happens when single electron is emitted ?

When a single electron is emitted, it will pass through one of the slits and create an interference pattern on a screen located behind the slits. The interference pattern will be a series of bright and dark fringes that result from the constructive and destructive interference of the electron waves passing through the two slits.

It's worth noting that in the single-electron interference experiment, the electron behaves both as a wave and as a particle. When the electron is emitted, it is in a superposition of states, meaning that it is simultaneously passing through both slits. However, once the electron interacts with the screen, it collapses into a single state, and we observe it as a particle at a specific location on the screen.

the electron beam is attenuated to produce only one electron per minute, then we can assume that the electrons are being emitted one at a time. This is known as the single-electron or single-particle interference experiment.

This phenomenon is known as wave-particle duality and is a fundamental principle of quantum mechanics.

To learn more about electron follow the given link: https://brainly.com/question/13998346

#SPJ1

The electric flux that flows through the loop is 4.27 Nm²/C, and the loop's normal ought to be rotated by about 39.5 degrees.

Electric flux is a characteristic of an electric field and refers to the number of electric field lines that cross a specific area. Electric field lines, according to this theory, begin with positive electric charges and end with negative electric charges.

Part a: The following formula must be used to determine the electric flux through the loop:

= E A cos() Since the electric field is parallel to the x-axis and the loop is circular, the area of the loop can be calculated as follows:

By substituting the given values for A = r², we obtain:

A = (0.177m)² = 0.0985 m² = 67.9° = 1.184 radians = (47.6 N/C)  (0.0985 m²)  cos(1.184)  4.27 Nm²/C Part (b) In order to determine the angle at which the flux through the loop becomes 0.304 Nm²/C, we can rewrite the equation for electric flux to account for:

= cos(-1)(/(EA))) By substituting the values provided, we obtain:

= cos(-1)(0.304 Nm²/C / (47.6 N/C  0.0985 m²))  = 39.5°; consequently, the loop's normal should be rotated by approximately 39.5°.

electric flux is a property of an electric field that can be described as the number of electric lines of force—also known as electric field lines—that cross a specific area. Electric field lines are thought to start with positive electric charges and end with negative electric charges.

Learn more about electric flux:

brainly.com/question/26289097

#SPJ1

It is confirmed by the origins of the cosmos that the early universe was once quite hot.

Radiation is the term used to describe energy that a source emits. Sunlight or heat from the sun, radiofrequency from an oven, X rays from an X-ray tube, and gamma rays from radioactive materials are a few examples.

It can be created artificially or it can come from unstable atoms that decay radioactively. Energy waves or charged particles are the two ways that radiation leaves its source. There are various types of radiation, and each one has unique characteristics and effects.

To know more about Radiation visit:

https://brainly.com/question/13934832

#SPJ4

9 joules of energy in one coulomb of charge.

The energy of the battery means the amount of energy given by the battery.

The energy that a battery imparts to a charge can be calculated using the formula:

E = V * Q

where,

E is the energy in joules, '

V is the voltage in volts, and

Q is the charge in coulombs.

For a 9 volt battery, the energy imparted to one coulomb of charge can be calculated as:

E = 9 V * 1 C

E = 9 J/C

One joule per coulomb is equal to one volt.

Hence,

9 J/C = 9 V

9 volt battery, the energy imparted to one coulomb of charge is 9 V.

For similar questions on energy stored in the battery

https://brainly.com/question/14468791

#SPJ4

Vector projection calculated by multiplying the magnitude of the two vectors by the cosecant of the angle between them.

Vector projection is a technique used in mathematics and physics to determine the component of a vector that lies in a specific direction. Given two vectors, the vector projection of one vector onto the other represents the length of the component of the first vector that lies in the direction of the second vector. The vector projection is calculated by taking the dot product of the two vectors and dividing them by the magnitude of the second vector.  

The resulting value is then multiplied by the unit vector of the second vector to obtain the vector projection. Vector projection is useful in a variety of applications, including physics, engineering, and computer graphics. In physics, vector projection is used to determine the component of a force that acts in a specific direction. In engineering, vector projection is used in structural analysis to determine the forces acting on a structure. In computer graphics, vector projection is used to simulate the effects of lighting and shading on three-dimensional objects.

To learn more about Vector projection visit here:

brainly.com/question/30709118

#SPJ4

The force requires to displace the object by 15 meters will be 5.67 N.

Work is defined as the energy transferred to or from an object by applying force along a displacement. In its most basic form, work equals the product of force strength and distance travelled for a constant force aligned with the direction of motion.

Given that the object is displaced by 15 meters and the work done is 85 Joules.

The force will be calculated as:

Work = Force x Displacement

Force = Work / Displacement

Force = 85 / 15

Force = 5.67 N

Therefore, the force will be 5.67 N.

To know more about work follow

https://brainly.com/question/352472

#SPJ1

The Yaesu FTM-300DR's optional wires-X connection cable kit is the SCU-39. The cables and adapters needed to use the wires-X digital communication mode and link the transceiver to a PC are included in this kit.

WIRES-X. An Internet communication system called WIRES (Wide-coverage Internet Repeater Enhancement System) increases the range of amateur radio communication. In WIRES-X, the wireless communication is connected to the Internet through the use of an amateur node station acting as an access point.

Requires a transceiver with the Yaesu C4FM Portable Digital Node capability (FT5D, FT3D, FT2D, FTM-400XD, FTM-300D, FTM-200D, FTM-100D: as of 8/2021 or Firmware update, FTM-400D: Requires Firmware update), a USB connection cable, and a computer with the WIRES-X software and WIRES-X.

To know more about wires visit:-

https://brainly.com/question/12984460

#SPJ4

Upon rounding to three decimal places, the charge on each object is approximately 0.000004039 C.

Coulomb's constant, denoted by k, is a proportionality constant that appears in Coulomb's law, which describes the electrostatic force between two electrically charged particles. The value of Coulomb's constant in a vacuum is approximately 8.98755 x 10⁹ N·m²/C².

The electric force between two charged objects is given by Coulomb's law:

F = k × (q1 × q2) / r²

where F is the electric force, q1 and q2 are the charges on the two objects, r is the distance between them, and k is Coulomb's constant, which has a value of 8.98755 × 10⁹ N·m²/C².

In this case, we have:

F = 190 N

r = 1,540 m

k = 8.98755 × 10⁹ N·m²/C²

q1 = q2 (since the objects are equally charged)

We can rearrange Coulomb's law to solve for the charge on each object:

q = sqrt(F × r² / k)

Substituting the given values, we get:

q = sqrt(190 N × (1,540 m)² / (8.98755 × 10⁹ N·m²/C²))

q ≈ 4.039 × 10⁻⁶ C.

To know more about Coulomb's constant, visit:

https://brainly.com/question/30196309

#SPJ1

The electromagnetic spectrum is arranged in the order of increasing frequency. The decreasing order of  wavelength of the radiations is radio radio waves, infrared,  visible light, uv rays and gamma rays.

The electromagnetic spectrum is the arrangement of waves in  the  order increasing frequency or decreasing wavelength. The order of the spectra starts from radio waves, microwaves, infrared, visible light, ultraviolet, x -rays and gamma rays.

The visible light that we can see is in between IR and UV rays. Hence, visible light has a frequency greater than IR rays but shorter than IR. Similarly visible light is longer than UV- rays but less frequency than UV rays.

Gamma  rays are the most energetic and shorter waves in the electromagnetic spectrum with smaller wavelength and greater frequency. Hence, the order of decreasing wavelength is 2, 1, 4, 3, 5.

Find more on electromagnetic waves:

brainly.com/question/25559554

#SPJ1