The gauge pressure of the air in the tank is 101325 Pa - 9.439*L when The air pressure in a tank is measured using an inclined manometer whose arm is inclined 45 degree.
Let's call the length of the inclined arm of the manometer L. Then, the vertical component of the arm length is given by
[tex]L sin(45) = L/\sqrt2[/tex]
Next, we can use the hydrostatic pressure equation to relate the pressure difference between the two arms of the manometer to the difference in height:
ΔP = ρgh
Where ΔP is the pressure difference, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the difference in height between the two arms of the manometer.
Since the two arms of the manometer are open to the atmosphere, the pressure at the top of the manometer is equal to the atmospheric pressure, which we can assume to be 101325 Pa. Therefore, the gauge pressure of the air in the tank is equal to:
[tex]P_{gauge} = P_{atm} - \triangle P[/tex]
where [tex]P_{atm[/tex] is the atmospheric pressure.
Putting it all together, we get:
ΔP = (ρwater - ρair)gh
[tex]= (1000 kg/m^3 - 1.225 kg/m^3) * 9.81 m/s^2 * (L/\sqrt2)[/tex]
= 9.439 * L
Therefore, the gauge pressure of the air in the tank is:
Pgauge = Patm - ΔP
= 101325 Pa - 9.439 * L
Note that the pressure will be in Pa, and you can convert it to other units like psi or bar as necessary.
Learn more about manometer :
https://brainly.com/question/18354578
#SPJ4
explain about unt chemistry department scholarship
The University of North Texas (UNT) Chemistry Department offers various scholarships to support undergraduate and graduate students who are pursuing degrees in chemistry or biochemistry.
These scholarships are intended to provide financial assistance to students who have demonstrated academic excellence, leadership potential, and a commitment to the field of chemistry.
The scholarships offered by the UNT Chemistry Department vary in terms of eligibility requirements, award amounts, and application procedures. Some scholarships are open to all chemistry and biochemistry majors, while others are more specific in their requirements, such as being a Texas resident, a U.S. citizen or permanent resident, or having a particular area of research interest.
The application typically includes information about the student's academic record, research experience, community involvement, and financial need. Some scholarships may require additional materials, such as letters of recommendation, a personal statement, or a research proposal.
Students who are awarded scholarships from the UNT Chemistry Department can use the funds to pay for tuition, fees, books, and other educational expenses.
For such more question on chemistry
https://brainly.com/question/26854014
#SPJ4
how much trends in the periodic table?
There are the main periodic trends in the periodic that is the electronegativity, the atomic size, the ionization energy, and the electron affinity, metallic character.
The main periodic trends in the periodic table is as :
The electronegativityThe atomic sizeThe ionization energyThe electron affinityThe metallic character1) The Electronegativity is the measures of how easily atom can attract the electrons to form the bond. it increases from left to right.
2) The atomic size decreases as we move in the period from the left to the right. the atomic size increases as we move in the group from the top to the bottom in the periodic table.
3) The ionization energy decreases as we move from to to the bottom in group.
4) The electron affinity increases as move left to right across period.
5) The metallic character decreases as we move left to right in period.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
for an acid base indicator to work well for your titration, it should change color. t/f
A chemical known as an acid-base indicator alters color when the pH of a solution changes. this statement is true.
What is an acid-base indicator?When a chemical is protonated or deprotonated, it changes its color, making it an acid-base indicator. Since this color shift only happens within a certain pH range, indicators can be used to roughly determine the equivalence point of an acid-base titration. Acidic substances cause blue litmus paper to turn red. If something is basic or alkaline, blue litmus paper will become red. In basic solutions, litmus turns blue, while in acidic solutions, it turns red.If there is a base present, red litmus paper becomes blue. Upon contact with an acid, blue litmus paper turns crimson. Only whether a solution is an acid or a base may be determined by using litmus paper; the pH of the solution is not. Use pH paper, universal indicator solution, pH meters, or any combination of these to determine ph.To learn more about acid-base indicator refer to:
https://brainly.com/question/30553094
#SPJ4
What the increasing concentration of atmospheric oxygen in earth’s the early atmosphere
The increasing concentration of atmospheric oxygen in Earth's early atmosphere is thought to be the result of the emergence and proliferation of photosynthetic organisms such as cyanobacteria.
What is Ethane?
Ethane is a hydrocarbon compound with the chemical formula C2H6. It is a colorless, odorless gas at standard temperature and pressure, and is the second simplest alkane after methane. Ethane is an important industrial chemical that is used primarily as a feedstock for the production of ethylene, which is then used in the manufacture of a wide range of plastics, resins, and other organic chemicals.
These organisms use sunlight to convert carbon dioxide and water into organic matter and oxygen gas through the process of photosynthesis. Over time, the accumulation of oxygen gas led to the development of the oxygen-rich atmosphere that supports complex life forms such as animals and plants. This process, known as the Great Oxygenation Event, occurred over a period of millions of years and is believed to have fundamentally altered the evolution and ecology of life on Earth.
Learn more about Ethane from given link
https://brainly.com/question/68465
#SPJ4
What was the main function of tRNA?
The main function of tRNA is to transfer amino acids to the ribosome during the process of protein synthesis.
During protein synthesis, tRNA molecules bind to specific amino acids in the cytoplasm and bring them to the ribosome.
Each tRNA molecule has an anticodon, which is a sequence of three nucleotides that is complementary to a specific codon on the mRNA.
The tRNA molecule binds to the mRNA at the codon and transfers the amino acid to the growing polypeptide chain.
In this way, tRNA plays a crucial role in the translation of the genetic code into proteins, which are the building blocks of all living organisms. Without tRNA, the process of protein synthesis would not be possible, and cells would not be able to carry out their functions.
To know more about tRNA here:
https://brainly.com/question/29775087#
#SPJ11
What is the molarity of a solution made by dissolving 26. 42 g of (nh4) 2 so4 in enough water to make 50 ml of solution?.
Molarity of a solution made by dissolving 26. 42 g of (nh4) 2 so4 in enough water to make 50 ml of solution is 3.8M.
Molar concentration (likewise called molarity, sum focus or substance focus) is a proportion of the centralization of a synthetic animal types, specifically of a solute in an answer, as far as measure of substance per unit volume of arrangement. In science, the most regularly involved unit for molarity is the quantity of moles per liter, having the unit image mol/L or mol/dm³ in SI unit. An answer with a grouping of 1 mol/L is supposed to be 1 molar, usually assigned as 1 M.
Molarity is number of moles of solute/volume of solution in liters
Here,number of moles of solute is =mass of solute/molar mass of solute.
Solute is (NH₄)₂SO₄,so molar mass of solute is 132.14g
Now,number of moles are =26.42/132.14=0.19mole.
Now,molarity =(0.19/50)×1000=3.8M.
Hence,molarity is 3,8M.
To know more about molarity,visit here:
https://brainly.com/question/8732513
#SPJ4
Anthracene is a yellow, crystalline solid found in coal tar. Complete this structure for anthracene, C14H10, by adding bonds and hydrogen atoms as necessary.
How many valence electrons occupy Ï-bond orbitals?
Only the bonding molecular orbitals can be occupied since only one electron is present in each of the unhybridized 2p orbitals, leaving four electrons accessible for bonding.
What is a bond orbitals?Bonding orbital: A molecular orbital created by the in-phase overlap of atomic orbitals. The atomic orbitals that make up a bonded molecular orbital have less energy than those orbitals.According to modern theory, orbitals are where electrons reside. An electron is most likely to be found in an orbital, which is a region of space.The four fundamental types of orbitals are s, p, d, and f. Two electrons can fit inside a s orbital, which is spherical in shape.The three types of molecular orbitals that come from the interaction of atomic orbitals are bonding, antibonding, and nonbonding. Bonding MOs: Bonding interactions between atomic orbitals are positive (in-phase) interactions.To learn more about bond orbitals refer to:
https://brainly.com/question/14649495
#SPJ4
____is a narcotic and the primary active chemical in opium from which heroin is derived.
Heroin is a degraded form of diamorphine. It is a semi-synthetic substance made from morphine that has been acetylated.
What is meant by diamorphine?(dy-uh-MOR-fen HY-droh-Khor-ide) morphine derivative chemical. It is prohibited to use or sell diamorphine hydrochloride in the United States because of its high level of addiction potential. The treatment of severe pain is possible outside of the US. To opioid receptors in the central nervous system, diamorphine hydrochloride binds.Insomnia and mental fog are side effects of diamorphine. Patients shouldn't operate machinery or drive if they are impacted. Respiratory problems are the most major side effect of therapy (see also 4.9 Overdose). Sedation, vomiting and nausea, constipation, and perspiration are the most frequent adverse reactions.As a potent analgesic, diamorphine is its main use. It is an expectorant and a respiratory sedative when pain is not present. The painful breathlessness that comes with dying can be relieved by using this side effect.To learn more about diamorphine refer to:
https://brainly.com/question/30628592
#SPJ4
how many moles are in 100 gram?
There are approximately 0.555 moles in 100 grams of glucose.
One mole of a substance is defined as the amount of that substance which contains the same number of entities (such as atoms, molecules, or ions) as there are atoms in 12 grams of carbon-12. This number is known as Avogadro's number and is approximately 6.022 x 10²³ entities per mole.
The number of moles in 100 grams of a substance depends on its molar mass. To calculate the number of moles, we need to divide the given mass by the molar mass of the substance. The formula is:
Number of moles = given mass / molar mass
For example, if we want to find the number of moles in 100 grams of glucose (C₆H₁₂O₆), which has a molar mass of 180.16 g/mol, the calculation would be:
Number of moles = 100 g / 180.16 g/mol
Number of moles = 0.555 moles
To know more about moles here
https://brainly.com/question/20486415
#SPJ4
How does nitrogen fixation lead to enhanced plant growth?ONitrogen fixation prevents pathogens from infecting the plant. ONitrogen fixation directly by the plant is very expensive in terms of metabolic energy. ONitrogen fixation prevents herbivores from eating the plant. OFixed nitrogen can be used by plants to produce protein ONitrogen fixation enables prokaryotes to supply the plant with proteins directly
Nitrogen fixation can lead to enhanced plant growth with Fixed nitrogen can be used by plants to produce protein. Option D is correct.
Fixed nitrogen can be used by plants to produce protein, which is necessary for growth and development. Nitrogen is a key component of amino acids, which are the building blocks of proteins. Amino acids are used by plants to make enzymes, chlorophyll, and other important molecules.
However, atmospheric nitrogen gas (N₂) cannot be directly used by plants. Nitrogen fixation is the process by which atmospheric nitrogen is converted into a usable form, such as ammonia (NH₃) or nitrate (NO₃⁻), by certain bacteria or other microorganisms.
These microorganisms can either form a symbiotic relationship with the plant, living in the roots or nodules, or exist independently in the soil. Once the fixed nitrogen is available in the soil, plants can take it up through their roots and use it to produce proteins and other nitrogen-containing molecules, leading to enhanced growth and productivity.
Hence, D. Fixed nitrogen can be used by plants to produce protein is the correct option.
To know more about Nitrogen fixation here
https://brainly.com/question/19938608
#SPJ4
--The given question is incomplete, the complete question is
"How does nitrogen fixation lead to enhanced plant growth? A) Nitrogen fixation prevents pathogens from infecting the plant. B) Nitrogen fixation directly by the plant is very expensive in terms of metabolic energy. C) Nitrogen fixation prevents herbivores from eating the plant. D) Fixed nitrogen can be used by plants to produce protein E) Nitrogen fixation enables prokaryotes to supply the plant with proteins directly."--
Chemistry help needed !!
The approximate melting point of the substance represented by line from point B to point C. Phase change is associated with latent heat, as it reflects the energy absorbed or released during the phase change without any change in temperature.
ExplanationThe melting point is a specific temperature at which a substance undergoes a phase change from a solid state to a liquid state. Generally, most substances can exist in three phases: solid, liquid, and gas.
When a substance is heated, its temperature increases, and it goes through a phase change that naturally from solid to liquid and then from liquid to gas. During these phase changes, the temperature remains constant, as the energy is being used to break the intermolecular bonds that hold the particles together.
In the given graph,
The first horizontal line from point B to point C represents the temperature at which the substance is melting. This is the temperature at which the substance undergoes a phase change from a solid state to a liquid state.The second horizontal line on the graph that runs from point D to point E represents the approximate boiling point of the substance. This is the temperature at which the substance undergoes a phase change from a liquid state to a gas state.Learn more about melting point and boiling point on:
brainly.com/question/40140brainly.com/question/30861415brainly.com/question/29233996Is Carbonic (H2CO3) an acid or base?
Carbonic H₂CO₃ is a weak acid .
Being a weak acid, H₂CO₃ is unstable in the natural world.
When there is water present, it partially dissociates, releasing H+ and HCO₃- (bicarbonate) ions.
As carbonic acid is a diprotic acid, it can produce both bicarbonates and carbonates as salts.
Bicarbonate salts are produced when a base is added in modest amounts to H₂CO₃ , whereas carbonate salts are produced when a base is added in large amounts.
It should be noted that industrial fermentation procedures or the large-scale burning of fossil fuels can produce carbonic acid as a byproduct.
The preparation of carbonated water, sparkling wine, and other aerated drinks involve the use of carbonic acid.
know more about carbonic acid click here;
https://brainly.com/question/28175742
#SPJ4
What happens when we add water to acid and acid to water?
Explanation:
When the water add acid there have the reaction then the molecules are evolve highly reactive which have produce bubble which cause our face directly but acid add in water there have less reactive molecules evolve ant there doesnot produce bubble
*PLEASE HELP*
Your barbecue grill uses propane (C3Hg) to cook your food while butane (C4H10) is used in chemistry laboratories to perform experiments. Write an equation for hydrocarbon combustion for each of the gases and then balance.
Are these reactions endothermic or exothermic? How do you know?
Assume that the gases burn clean and completely, calculate the energy released by each in kJ/mole.
Calculate the energy released in kJ/g. Which gas is more efficient?
Be sure to show all of your work!
According to the hydrocarbon combustion equation Both reactions are exothermic because they release energy in the form of heat.
Also, according to the calculation of the energy released in kJ/g, the Energy released by propane is 50.34 kJ/g and the Energy released by propane is 49.52 kJ/g. Therefore, propane is slightly more efficient than butane in terms of energy released per gram.
Explanation of the calculation of the hydrocarbon combustion:
The equation for hydrocarbon combustion is:
Hydrocarbon + Oxygen → Carbon Dioxide + Water + Energy
For propane (C3H8):
C3H8 + 5O2 → 3CO2 + 4H2O + Energy
For butane (C4H10):
C4H10 + 6.5O2 → 4CO2 + 5H2O + Energy
Both of these reactions are exothermic because they release energy in the form of heat.
Explanation of the calculation of the energy released in kJ/g:
To calculate the energy released by each gas in kJ/mole, we can use the standard enthalpy of combustion (∆Hc) values for propane and butane:
∆Hc for propane = -2220 kJ/mole
∆Hc for butane = -2878 kJ/mole
So, the energy released by propane is 2220 kJ/mole and the energy released by butane is 2878 kJ/mole.
To calculate the energy released in kJ/g, we can divide the energy released in kJ/mole by the molar mass of each gas:
Energy released by propane in kJ/g = 2220 kJ/mole / 44.1 g/mole = 50.34 kJ/g
Energy released by butane in kJ/g = 2878 kJ/mole / 58.12 g/mole = 49.52 kJ/g
Therefore, propane is slightly more efficient than butane in terms of energy released per gram.
Learn more about hydrocarbon combustion:
https://brainly.com/question/23146159
#SPJ11
what chemical does your brain release when you are kind?
The chemical that your brain releases when you are kind is called oxytocin.
Oxytocin is a hormone that is associated with social bonding, trust, and positive social interactions. It is released in response to positive social interactions, such as hugging or showing kindness to others.
Studies have shown that increased levels of oxytocin can lead to increased empathy and pro-social behavior, such as generosity and cooperation. Additionally, oxytocin has been shown to decrease stress levels and promote feelings of calm and relaxation.
Overall, practicing kindness can not only benefit those around us but also have positive effects on our own mental and emotional well-being.
Learn more about oxytocin
brainly.com/question/8492292
#SPJ4
In the term trace element, the modifier trace means a. the element is required in very small amounts.b. the element can be used as a label to trace atoms through an organism's metabolism. c. the element is very rare on Earth d. the element enhances health but is not essential for the organism's long-term survival e. the element passes rapidly through the organism
In the term trace element, the modifier trace means elemental is required in very small amount.
Micronutrient is another name for a trace element. Additionally, it is described as any chemical element needed by living things in minute or small levels, typically as a component of an essential enzyme (cells produced by catalytic protein).
The precise requirements for trace elements vary depending on the species; for example, copper, zinc, manganese, boron, and molybdenum are frequently needed by plants. Animals frequently needed cobalt, manganese, and iodine.
Lack of essential animal trace elements utilised by animals in the soil may not harm plants, but animals consuming those plants acquire their deficiency diseases. Absence of essential plant trace elements required by plants in the soil results in deficiency disease.
Therefore, the term "trace" denotes a very minimal requirement for the elemental.
To learn more about trace element visit;
https://brainly.com/question/30420854
#SPJ4
What is the pH of a solution that contains11.7 g of NaCl for every 200 mL of solution?1. 1.02. 10−13. 7.0 4. 1.0 × 10−7
To determine the pH of a solution of NaCl, we first need to find the concentration of the Na+ and Cl- ions in the solution. NaCl is a strong electrolyte and dissociates completely into Na+ and Cl- ions in water.
The molar mass of NaCl is 58.44 g/mol. Therefore, the number of moles of NaCl in 11.7 g can be calculated as:
moles of NaCl = mass of NaCl / molar mass of NaCl
moles of NaCl = 11.7 g / 58.44 g/mol
moles of NaCl = 0.2 mol
The volume of the solution is given as 200 mL, which is equal to 0.2 L. Therefore, the concentration of Na+ and Cl- ions in the solution can be calculated as follows:
concentration = moles / volume
concentration of Na+ or Cl- = 0.2 mol / 0.2 L
concentration of Na+ or Cl- = 1 M
Since NaCl is a neutral salt, it does not contribute to the acidity or basicity of the solution. Therefore, the pH of the solution can be calculated using the concentration of H+ ions in the solution, which can be assumed to be equal to the concentration of OH- ions due to the autoionization of water.
pH = -log[H+]
pH = -log[OH-]
At 25°C, the concentration of H+ ions in pure water is 1.0 × 10^-7 M. Therefore, the concentration of OH- ions is also 1.0 × 10^-7 M.
Since the solution is neutral, the concentration of H+ and OH- ions must be equal. Therefore:
[H+] = [OH-] = 1.0 × 10^-7 M
Taking the negative logarithm of both sides gives:
pH = -log(1.0 × 10^-7)
pH = 7.0
Therefore, the pH of the solution is 7.0.
what is pH of a solution?
The pH of a solution is a measure of its acidity or basicity. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution, with a pH of 7 being neutral. The pH scale ranges from 0 to 14, with values less than 7 indicating acidity, values greater than 7 indicating basicity, and a pH of 7 indicating neutrality. A change of one unit on the pH scale represents a tenfold change in the concentration of hydrogen ions. The pH of a solution can be measured using a pH meter or through the use of indicators, which change color depending on the pH of the solution.
Hence, the answer is, the pH of the solution is 7.0.
To learn more about pH, follow the link:
https://brainly.com/question/15289741
#SPJ4
what are the equilibrium partial pressures of pcl3 , cl2 , and pcl5 , respectively?
Equilibrium partial pressures of PCl₃ , Cl₂ , and PCl₅ are 0.3atm,0.2atm and 0.6atm respectively.
In a combination of gases, every constituent gas has a partial pressure which is the notional pressure of that constituent gas as though it alone involved the whole volume of the first blend at the equivalent temperature.[1] The complete tension of an ideal gas blend is the amount of the halfway tensions of the gases in the blend (Dalton's Regulation).
The partial pressure of a gas is a proportion of thermodynamic action of the gas' particles. Gases break down, diffuse, and respond as per their halfway tensions yet not as per their focuses in gas blends or fluids. This overall property of gases is additionally evident in compound responses of gases in science. For instance, the fundamental measure of oxygen for human breath, and the sum that is harmful, is set by the halfway tension of oxygen alone.
This is valid across an exceptionally extensive variety of various groupings of oxygen present in different breathed in breathing gases or broke down in blood;[2] subsequently, blend proportions, similar to that of breathable 20% oxygen and 80%, not entirely settled by volume rather than by weight or mass.
Besides, the partial pressure of oxygen and carbon dioxide are significant boundaries in trial of blood vessel blood gases. All things considered, these pressure can likewise be estimated in, for instance, cerebrospinal liquid.
To know more about partial pressure,visit here:
https://brainly.com/question/15075781
#SPJ4
Water in an ice cube tray is put into the freezer section of a refrigerator. as it freezes, this water: ________
Water in an ice cube tray is put into the freezer section of a refrigerator. as it freezes, this water: turns into ice.
What are properties of water?
Water is a chemical compound composed of two hydrogen atoms and one oxygen atom (H2O). It has a high boiling point (100°C) and melting point (0°C), making it a liquid at room temperature. It is also one of the most abundant substances on Earth and covers nearly 70% of the planet. Its surface tension and adhesive properties allow it to form droplets, it has a high heat capacity, and it is an excellent solvent for many substances. Water is also able to absorb a large amount of energy as it evaporates, making it a great tool for cooling. Additionally, water is able to exist in three different states: solid (ice), liquid, and gas (vapor).
Therefore, Water in an ice cube tray is put into the freezer section of a refrigerator. as it freezes, this water: turns into ice.
To learn more about properties of water
Here: https://brainly.com/question/20287051
#SPJ4
the mass of a gaseous compound of phosphorus is 3.9 g at 457.4 K in a 1.16 L container and at a pressure of 732.3 mm Hg. What is the molar mass of the compound
Consider the nuclear equation below.
22
NaNe +6
Which is the missing value that will balance the equation?
+2
Answer:
The Correct option is "+1"
Which factor determines the shape of the spectra in NMR spectroscopy?
The shape of the spectra in nuclear magnetic resonance (NMR) spectroscopy is primarily determined by the chemical environment of the nucleus being studied. In NMR spectroscopy, a sample is exposed to a magnetic field, and the resulting NMR spectrum reflects the absorption of energy by the nuclei in the sample as they undergo transitions between different energy levels.
What is Spectra?
In physics and chemistry, a spectrum (plural: spectra) is a range of electromagnetic radiation or other physical quantities, such as sound or mass, that are ordered by their wavelengths or frequencies. The term spectrum can refer to a continuous range of values or to a discrete set of lines or bands that correspond to specific energy transitions.
The chemical environment of a nucleus in a molecule affects its NMR spectrum in several ways. One important factor is the shielding or DE shielding effect of neighboring atoms or groups. When a nucleus is surrounded by electrons, it experiences a shielding effect that reduces its magnetic field, causing it to resonate at a lower frequency. Conversely, when a nucleus is DE shielded by nearby electron-withdrawing groups, it resonates at a higher frequency. This effect is responsible for the chemical shift observed in NMR spectra.
The shape of the NMR spectrum can also be influenced by other factors such as the number and arrangement of neighboring nuclei, the spin-spin coupling between nuclei, and the relaxation time of the nuclei in the sample. Together, these factors determine the complex patterns observed in NMR spectra and provide a wealth of information about the chemical structure and environment of molecules.
Learn more about Spectra from given link
https://brainly.com/question/1968356
#SPJ4
WILL GIVE BRAINLIEST
Tree Identification Vocabulary:
bract – a leaflike structure often occurring between scales of cones
barb – a hooked or sharp bristle
Dichotomous Key
a. Leaves are needlelike, occurring in groups. go to #2
b. Leaves are needlelike leaves, go to #3 not grouped together (cover branch evenly).
a. Needles occur in groups of 2. Colorado Pinyon Pine (Pinus edulis)
b. Needles occur in groups of 3 or more. go to #4
a. Cones have scales with bracts. go to #5
b. Cones have rounded or wavy scales with no bracts. go to #6
a. Cones have barbs on the ends of scales. go to #7
b. Cones have smooth scales with no barbs. Sugar Pine (Pinus lambertiana)
a. Cones hang down from branch and have 3-pointed bracts. Douglas Fir (Pseudotsuga menziesii)
b. Cones are upright on branch. Noble Fir (Abies procera)
a. Cones are medium-sized and rounded. Most needles curve or point upward. Blackhills White Spruce (Picea glauca)
b. Cones are long and slender. Needles point forward. Colorado Blue Spruce (Picea pungens)
a. Cones have barbs that point upward. go to #8
b. Cones have spiny barbs that point downward. Coulter Pine (Pinus coulteri)
a. Needles are longer than the cones (longer than 4”) and slender. Jeffrey Pine (Pinus jeffreyi)
b. Needles are shorter than the cones (less than 2” long). Bristlecone Pine (Pinus aristata)
Fill in the following chart, using the dichotomous key to identify each tree. The first one has been completed for you. You should copy the chart and complete it using the lesson information.
In order to produce a Tree Identification Vocabulary, we use the information:
Tree Name Needle/Leaf Type Needle/Leaf Arrangement Cone Scale Bracts Cone Scale Barbs
Colorado Pinyon Pine Needle Grouped in 2s Yes No
Using the dichotomous key:Colorado Pinyon Pine - Needles occur in groups of 2, cones have scales with bracts, no barbs on the scales.
Douglas Fir - Needles are not needle-like and are often soft, cones hang down from the branches and have 3-pointed bracts.
Noble Fir - Needles are not needle-like and are often soft, cones are upright on branches, no bracts or barbs on the scales.
Blackhills White Spruce - Needles occur in groups of 3 or more, cones are medium-sized and rounded, most needles curve or point upward, no barbs on the scales.
Colorado Blue Spruce - Needles occur in groups of 3 or more, cones are long and slender, needles point forward, no bracts or barbs on the scales.
Coulter Pine - Needles occur in groups of 3 or more, cones have spiny barbs that point downward.
Jeffrey Pine - Needles are longer than the cones (longer than 4") and slender, cones have barbs that point upward.
Bristlecone Pine - Needles are shorter than the cones (less than 2" long), no bracts or barbs on the scales.
Read more about trees here:
https://brainly.com/question/2189834
#SPJ1
A selenide ion is isoelectronic with which noble gas?a argonb xenonC radond krypton
A selenide ion is the isoelectronic with the noble gas is the correct option is d. krypton.
The atomic number of the selenide is 34. The electronic configuration of the selenide is as :
Electronic configuration of selenide = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁴
The selenide ion is Se²⁻, this means that the selenide ion gains the two electron and form the anion. The electronic configuration for the selenide ion is as :
Electronic configuration of Se²⁻ = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ or [Kr]
The atomic number of the krypton is 36. Therefore the selenide ion is isoelectronic with the krypton.
To learn more about krypton here
https://brainly.com/question/29480958
#SPJ4
requires minimum safety standards for community water supplies
a. Safe Drinking Water Act
b. Clean Air Act
c. Clean Water Act
d. Resource Conservation Recovery Act
To safeguard the standard of drinking water in the United States, the Safe Drinking Water Act (SDWA) was enacted. This legislation applies to all waters that are actually or hypothetically intended for consumption, whether they originate from above-ground or underground sources.
What is meant by safety Drinking Water?Water that can be provided to a user and is suitable for drinking, food preparation, personal hygiene, and washing is referred to as safe drinking (potable) water. At the point of supply to the customers, the water must adhere to the necessary (chemical, biological, and physical) quality requirements. Safe water is water that won't hurt you if you drink it. This phrase can refer to water for swimming or other uses, but drinking water is where it most frequently appears. The amount of dangerous contaminants in the water must be sufficiently low for it to be safe. One of the best ways to purify water is with a RO Purifier. Reverse osmosis eliminates impurities by forcing water through a semipermeable membrane.To learn more about safety Drinking Water refer to:
https://brainly.com/question/13377464
#SPJ4
the first element in the group of rare earth metalsi called?
The first element in the group of rare earth metal is called Lanthanum (La).
It is a silvery-white, malleable, and ductile metal that belongs to the lanthanide series of elements. Lanthanum has the atomic number 57 and is the first member of the lanthanide series, which includes 15 elements with atomic numbers ranging from 57 (La) to 71 (Lu).
Lanthanum is the first and the most abundant element in the lanthanide series of elements, which are also known as the rare earth elements. The rare earth metals, have unique electronic, magnetic, and optical properties that make them important in a wide range of technological applications.
To know more about Lanthanum here
https://brainly.com/question/14611133
#SPJ4
--The given question is incorrect, the correct question is
"The first element in the group of rare earth metal is called?"--
Calculate the mass of chlorine gas needed to react with 84. 0 grams of aluminum to produce aluminum chloride
The mass of chlorine gas needed to react with 84 grams of aluminum is 331.21 grams.
Balanced chemical equationTo calculate the mass of chlorine gas needed to react with 84.0 grams of aluminum to produce aluminum chloride, we can use the balanced chemical equation for the reaction:
2Al + 3Cl₂ → 2AlCl₃
From the balanced equation, we can see that 2 moles of aluminum react with 3 moles of chlorine gas to produce 2 moles of aluminum chloride. We can use this mole ratio to determine the mass of chlorine gas needed.
First, we need to convert the mass of aluminum to moles:
84.0 g Al × (1 mol Al / 26.98 g Al) = 3.11 mol Al
Next, we can use the mole ratio from the balanced equation to determine the moles of chlorine gas needed:
3.11 mol Al × (3 mol Cl₂ / 2 mol Al) = 4.67 mol Cl₂
Finally, we can convert the moles of chlorine gas to mass:
4.67 mol Cl₂ × (70.90 g Cl₂ / 1 mol Cl₂) = 331.21 g Cl₂
Therefore, the mass of chlorine gas needed to react with 84.0 grams of aluminum to produce aluminum chloride is 331.21 grams.
Learn more about stoichiometric calculation here brainly.com/question/27287858
#SPJ11
Molecules of glucose (blood sugar) contain 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. What are the molecular and empirical formulas of glucose?
The molecular formula of glucose is C₆H₁₂O₆ and its empirical formula is CH₂O.
The molecular formula is defined as an expression which describes the number of atoms of each element in one molecule of a compound. Basically, molecular formula shows the actual number of each atom in a molecule.
Empirical formula is described as a chemical formula showing the simplest ratio of elements in a compound rather than the total number of atoms in the molecule.
The molecular formula of glucose is C₆H₁₂O₆ because one molecule actually contains 6 C, 12 H, and 6 O atoms. Therefore, the simplest whole-number ratio of C to H to O atoms in glucose is 1:2:1, so the empirical formula is CH₂O.
Learn more about molecular and empirical mass from the link given below.
https://brainly.com/question/13348838
#SPJ4
Plants use the relative abundance of Pr/Pfr to help track the day length. Which of the following statements is correct?
A) High levels of Pfr trigger development of flower primordia in short day plants by promoting transcription of the gene CO.
B) High levels of Pr directly inhibit the transcription of gene CO in long day plants
C) High levels Pfr triggers development of flower primordia in long day plants by promoting transcription of the gene CO.
D) When Pr levels are high relative to Pfr levels, plants have been exposed to a long duration of daylight.
C) High levels of Pfr triggers development of flower primordia in long day plants by promoting transcription of the gene CO is the correct statement.
What is Phytochromes ?
Phytochromes are a class of photoreceptor proteins found in plants, involved in the regulation of many important developmental processes, including seed germination, stem elongation, leaf expansion, and flowering.
Phytochromes sense changes in the relative ratio of red light (around 660 nm) to far-red light (around 730 nm) and undergo a reversible photoconversion between two states: the inactive, red-light absorbing form (Pr) and the active, far-red light absorbing form (Pfr).
Plants use phytochromes to sense changes in the ratio of red light (660 nm) to far-red light (730 nm) to measure day length. Phytochrome exists in two interconvertible forms: the inactive Pr (red-light absorbing) and the active Pfr (far-red light absorbing). The ratio of Pr to Pfr can be used by plants to track the duration of daylight.
In long-day plants, exposure to light triggers the conversion of Pr to Pfr, and high levels of Pfr promote the transcription of the gene CO (CONSTANS). CO is a transcription factor that activates the expression of other genes involved in flower development, leading to the formation of flower primordia.
In short-day plants, high levels of Pfr inhibit the transcription of the gene CO, preventing flower development until day length decreases and the Pfr levels decrease.
Therefore, statement A is incorrect, statement B is incorrect, and statement D is partially correct but does not directly answer the question.
Learn more about Phytochromes from given link
https://brainly.com/question/13048818
#SPJ4
Question 2 1 pts A system containing 1 atm of an ideal gas is doubled in temperature and halved in volume. What is the new pressure? 2 atm 1 atm 0.5 atm 4 atm
The new pressure would be 4 atm. Option D is correct.
The ideal gas law is given by PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. Since the gas is ideal, the number of moles remains constant.
If the temperature is doubled, the new temperature is 2T. If the volume is halved, the new volume is 0.5V. Substituting these new values into the ideal gas law, we get:
(1 atm) (0.5 V) = nR (2T)
0.5PV = 2nRT
2PV = 4nRT
Solving for P, we get:
P = (4nRT) / (2V) = 4 atm
Therefore, the new pressure is 4 atm.
To know more about ideal gas law here
https://brainly.com/question/28257995
#SPJ4
--The given question is incomplete, the complete question is
"A system containing 1 atm of an ideal gas is doubled in temperature and halved in volume. What is the new pressure? A) 2 atm B) 1 atm C) 0.5 atm D) 4 atm"--